Commit Graph

50 Commits

Author SHA1 Message Date
Chris Wilson 164c859845 drm/i915: Add some debug breadcrumbs to connector detection
Try to decypher detection failures is a little tricker at the moment as
the only indicator of progress is when output_poll_execute() tells us
the result after the connector->detect() has run. This patch adds a
telltale to the start of each detect function so that we can track
progress and associate activity more clearly with each connector.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-24 10:37:07 +02:00
Daniel Vetter 4a33e48d0e drm/i915: fix dvo DPLL regression
I've missed that intel_dvo_mode_set changes the dpll configuration.
Hence when I've reworked the sequence to only enable the dpll in the
crtc_enable callback in

commit 66e3d5c099
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jun 16 21:24:16 2013 +0200

    drm/i915: move i9xx dpll enabling into crtc enable function

that special DVO bit was lost. Some BSpec reading confirms that it's
only needed for DVO encoders. Section 1.5.4, "DPLL A Control Register"
for bit 30:

"2X Clock Enable. When driving In non-gang DVO modes such as a
connected flat panel or TV, a 2X" version of the clock is needed. When
not using the 2X output it should be disabled. This bit cannot be set
when driving the integrated LVDS port on devices such as Montara-GM."

Fix this regression up.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66516
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Partially-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-08 22:04:37 +02:00
Jani Nikula 6b1c087ba5 drm/i915: document why dvo/sdvo/crt need a special dpms function
In the cloned case, changing just one output but keeping the other, the
pipe state won't change and intel_crtc_update_dpms will be a nop, but we
still need to update the dpms state of the output being changed.

Only dvo, sdvo and crt are cloneable, so only those three have special
dpms functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-31 20:54:04 +02:00
Jesse Barnes 045ac3b562 drm/i915: add encoder get_config function v5
We can use this for fetching encoder specific pipe_config state, like
mode flags, adjusted clock, etc.

Just used for mode flags atm, so we can check the pipe config state at
mode set time.

v2: get_config when checking hw state too
v3: fix DVO and LVDS mode flags (Ville)
    get SDVO DTD for flag fetch (Ville)
v4: use input timings (Ville)
    correct command used (Ville)
    remove gen4 check (Ville)
v5: get DDI flag config too

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v4)
Tested-by: Paulo Zanoni <przanoni@gmail.com> (the new hsw ddi stuff)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-21 09:55:19 +02:00
Daniel Vetter e1b73cba13 Linux 3.10-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRmpexAAoJEHm+PkMAQRiGrRIH/1uWFW38RvaCV/PXm/ia6Z+x
 BfBJfBIvPxGwb4n7aQNQlhU25xkfrPZ6szO4WiBH5/KPH3xYi2I2OZ1AzffkYqMF
 BWkPmsPK6EsTdp16zsi6JtH2aXArG4SpYA7ZamPvDkmfigHuiZg7GlL/9eHTRPNV
 P7Q8JToOrcnP8RoGgNj0uFiQeQbc62Kmoq7WuPtUhVlpQCCCknXgOJiYgz9w6Xe9
 /i79YFS8WRrzAquExT1NbIOh4ZMqB9MvuroaVWy8JDDLUyz7QUvOCe3tCDNguwgi
 FdWvU6nfkdQq5SLaWCWXDE9Rp/pL1MvfBn9vCOwFcp42aw0aQ0PgJVIXvsqufd0=
 =jgDI
 -----END PGP SIGNATURE-----

Merge tag 'v3.10-rc2' into drm-intel-next-queued

Backmerge Linux 3.10-rc2 since the various (rather trivial) conflicts
grew a bit out of hand. intel_dp.c has the only real functional
conflict since the logic changed while dev_priv->edp.bpp was moved
around.

Also squash in a whitespace fixup from Ben Widawsky for
i915_gem_gtt.c, git seems to do something pretty strange in there
(which I don't fully understand tbh).

Conflicts:
	drivers/gpu/drm/i915/i915_reg.h
	drivers/gpu/drm/i915/intel_dp.c

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-21 09:52:16 +02:00
braggle@free.fr 98304ad186 drm/i915: add support for dvo Chrontel 7010B
This patch add dvo detection for the Chrontel 7010B on some old hardware.

References: https://bugzilla.kernel.org/show_bug.cgi?id=55101
Signed-off-by: Braggle <braggle at free.fr>
[danvet: Fix up whitespace mangling.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-20 22:02:49 +02:00
David Müller (ELSOFT AG) e4bfff54ed drm/i915: Fall back to bit banging mode for DVO transmitter detection
As discussed in this thread
http://lists.freedesktop.org/archives/dri-devel/2013-April/037411.html
GMBUS based DVO transmitter detection seems to be unreliable which could
result in an unusable DVO port.

The attached patch fixes this by falling back to bit banging mode for
the time DVO transmitter detection is in progress.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Tested-by: David Müller <d.mueller@elsoft.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 16:31:41 +02:00
Daniel Vetter af5676f1f9 drm/i915: rip out helper->disable noop functions
Now that the driver is in control of whether it needs to disable
everything at take-over or not, we can rip this all out.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-14 00:07:54 +01:00
Linus Torvalds 612a9aab56 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm merge (part 1) from Dave Airlie:
 "So first of all my tree and uapi stuff has a conflict mess, its my
  fault as the nouveau stuff didn't hit -next as were trying to rebase
  regressions out of it before we merged.

  Highlights:
   - SH mobile modesetting driver and associated helpers
   - some DRM core documentation
   - i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
     combined pte writing, ilk rc6 support,
   - nouveau: major driver rework into a hw core driver, makes features
     like SLI a lot saner to implement,
   - psb: add eDP/DP support for Cedarview
   - radeon: 2 layer page tables, async VM pte updates, better PLL
     selection for > 2 screens, better ACPI interactions

  The rest is general grab bag of fixes.

  So why part 1? well I have the exynos pull req which came in a bit
  late but was waiting for me to do something they shouldn't have and it
  looks fairly safe, and David Howells has some more header cleanups
  he'd like me to pull, that seem like a good idea, but I'd like to get
  this merge out of the way so -next dosen't get blocked."

Tons of conflicts mostly due to silly include line changes, but mostly
mindless.  A few other small semantic conflicts too, noted from Dave's
pre-merged branch.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
  drm/nv98/crypt: fix fuc build with latest envyas
  drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
  drm/nv41/vm: fix and enable use of "real" pciegart
  drm/nv44/vm: fix and enable use of "real" pciegart
  drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
  drm/nouveau: store supported dma mask in vmmgr
  drm/nvc0/ibus: initial implementation of subdev
  drm/nouveau/therm: add support for fan-control modes
  drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
  drm/nouveau/therm: calculate the pwm divisor on nv50+
  drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
  drm/nouveau/therm: move thermal-related functions to the therm subdev
  drm/nouveau/bios: parse the pwm divisor from the perf table
  drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
  drm/nouveau/therm: rework thermal table parsing
  drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
  drm/nouveau: fix pm initialization order
  drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
  drm/nouveau: log channel debug/error messages from client object rather than drm client
  drm/nouveau: have drm debugging macros build on top of core macros
  ...
2012-10-03 23:29:23 -07:00
David Howells 760285e7e7 UAPI: (Scripted) Convert #include "..." to #include <path/...> in drivers/gpu/
Convert #include "..." to #include <path/...> in drivers/gpu/.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:07 +01:00
David Howells 4126d5d61f UAPI: (Scripted) Remove redundant DRM UAPI header #inclusions from drivers/gpu/.
Remove redundant DRM UAPI header #inclusions from drivers/gpu/.

Remove redundant #inclusions of core DRM UAPI headers (drm.h, drm_mode.h and
drm_sarea.h).  They are now #included via drmP.h and drm_crtc.h via a preceding
patch.

Without this patch and the patch to make include the UAPI headers from the core
headers, after the UAPI split, the DRM C sources cannot find these UAPI headers
because the DRM code relies on specific -I flags to make #include "..."  work
on headers in include/drm/ - but that does not work after the UAPI split without
adding more -I flags.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-02 18:01:05 +01:00
Daniel Vetter b980514c9a drm/i915: improve modeset state checking after dpms calls
Now that we have solid modeset state tracking and checking code in
place, we can do the Full Monty also after dpms calls.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:31 +02:00
Daniel Vetter 1f70385510 drm/i915: s/intel_encoder_disable/intel_encoder_noop
Because that's what it is. Unfortunately we can't rip this out because
the fb helper has an incetious relationship with the crtc helper - it
likes to call disable_unused_functions, among other things.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:27 +02:00
Daniel Vetter 0a91ca2921 drm/i915: check connector hw/sw state
Atm we can only check the connector state after a dpms call - while
doing modeset with the copy&pasted crtc helper code things are too
ill-defined for proper checking. But the idea is very much to call
this check from the modeset code, too.

v2: Fix dpms check and don't presume that if the hw isn't on that it
must not be linked up with an encoder (it could simply be switched off
with the dpms state).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:59:42 +02:00
Daniel Vetter 732ce74f4a drm/i915/dvo: implement get_hw_state
Similar to the sdvo code we poke the dvo encoder whether the output is
active. Safe that dvo encoders are not standardized, so this requires
a new callback into the dvo chip driver.

Hence implement that for all 6 dvo drivers.

v2: With the newly added ns2501 we now have 6 dvo drivers instead of
just 5 ...

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:52 +02:00
Daniel Vetter c9deac9776 drm/i915: rip out encoder->prepare/commit
With the new infrastructure we're doing this when enabling/disabling
the entire display pipe.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:57:19 +02:00
Daniel Vetter b2cabb0e1d drm/i915: convert dpms functions of dvo/sdvo/crt
Yeah, big patch but I couldn't come up with a neat idea of how to
split it up further, that wouldn't break dpms on cloned configs
somehow. But the changes in dvo/sdvo/crt are all pretty much
orthonogal, so it's not too bad a patch.

These are the only encoders that support cloning, which requires a few
special changes compared to the previous patches.
- Compute the desired state of the display pipe by walking all
  connected encoders and checking whether any has active connectors.
  To make this clearer, drop the old mode parameter to the crtc dpms
  function and rename it to intel_crtc_update_dpms.
- There's the curious case of intel_crtc->dpms_mode. With the previous
  patches to remove the overlay pipe A code and to rework the load
  detect pipe code, the big users are gone. We still keep it to avoid
  enabling the pipe twice, but we duplicate this logic with
  crtc->active, too. Still, leave this for now and just push a fake
  dpms mode into it that reflects the state of the display pipe.

Changes in the encoder dpms functions:
- We clamp the dpms state to the supported range right away. This is
  escpecially important for the VGA outputs, where only older hw
  supports the intermediate states. This (and the crt->adpa_reg patch)
  allows us to unify the crt dpms code again between all variants
  (gmch, vlv and pch).
- We only enable/disable the output for dvo/sdvo and leave the encoder
  running. The encoder will be disabled/enabled when we switch the
  state of the entire output pipeline (which will happen right away
  for non-cloned setups). This way the duplication is reduced and
  strange interaction when disabling output ports at the wrong time
  avoided.

The dpms code for all three types of connectors contains a bit of
duplicated logic, but I think keeping these special cases separate is
simpler: CRT is the only one that hanldes intermediate dpms state
(which requires extra logic to enable/disable things in the right
order), and introducing some abstraction just to share the code
between dvo and sdvo smells like overkill. We can do that once someone
bothers to implement cloning for the more modern outputs. But I doubt
that this will ever happen.

v2: s/crtc/crt/_set_dpms, noticed by Paulo Zanoni.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:55:17 +02:00
Daniel Vetter 19c63fa807 drm/i915/dvo: convert to encoder disable/enable
Similar to the sdvo conversion.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:55:11 +02:00
Daniel Vetter fac3274c4e drm/i915: simplify dvo dpms interface
All dvo drivers only support 2 dpms states, and our dvo driver
even switches of the dvo port for anything else than DPMS_ON. Hence
ditch this complexity and simply use bool enable.

While reading through this code I've noticed that the mode_set
function of ch7017 is a bit peculiar - it disable the lvds again, even
though the crtc helper code should have done that ... This might be to
work around an issue at driver load, we pretty much ignore the hw
state when taking over.

v2: Also do the conversion for the new ns2501 driver.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-17 10:10:02 +02:00
Thomas Richter 7434a255a5 drm/i915: Support for ns2501-DVO
This patch adds support for the ns2501 DVO, found in some older Fujitsu/Siemens Labtops.
It is in the state of "works for me".
Includes now proper DPMS support. Includes switching between resolutions -
from 640x480 to 1024x768.
Currently assumes that the native display resolution is 1024x768.

The ns2501 seems to be rather critical - if the output PLL is not
running, the chip doesn't seem to be clocked and then doesn't react
on i2c messages. Thus, a quick'n-dirty trick ensures that the DVO
is active before submitting any i2c messages to it. This is
probably to be reviewed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17902
Signed-off-by: Thomas Richter <thor@math.tu-berlin.de>
[danvet: fixup whitespace fail.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-25 18:23:48 +02:00
Daniel Vetter 66a9278eec drm/i915: simplify possible_clones computation
Intel hw only has one MUX for encoders, so outputs are either not
cloneable or all in the same group of cloneable outputs. This neatly
simplifies the code and allows us to ditch some ugly if cascades in
the dp and hdmi init code (well, we need these if cascades for other
stuff still, but that can be taken care of in follow-up patches).

Note that this changes two things:
- dvo can now be cloned with sdvo, but dvo is gen2 whereas sdvo is
  gen3+, so no problem. Note that the old code had a bug and didn't
  allow cloning crt with dvo (but only the other way round).
- sdvo-lvds can now be cloned with sdvo-non-tv. Spec says this won't
  work, but the only reason I've found is that you can't use the
  panel-fitter (used for lvds upscaling) with anything else. But we
  don't use the panel fitter for sdvo-lvds. Imo this part of Bspec is
  a) rather confusing b) mostly as a guideline to implementors (i.e.
  explicitly stating what is already implicit from the spec, without
  always going into the details of why). So I think we can ignore this
  - worst case we'll get a bug report from a user with with sdvo-lvds
  and sdvo-tmds and have to add that special case back in.

Because sdvo lvds is a bit special explain in comments why sdvo LVDS
outputs can be cloned, but native LVDS and eDP can't be cloned - we
use the panel fitter for the later, but not for sdvo.

Note that this also uncoditionally initializes the panel_vdd work used
by eDP. Trying to be clever doesn't buy us anything (but strange bugs)
and this way we can kill the is_edp check.

v2: Incorporate review from Paulo
- Add in a missing space.
- Pimp comment message to address his concerns.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-25 18:23:46 +02:00
Laurent Pinchart e811f5ae19 drm: Make the .mode_fixup() operations mode argument a const pointer
The passed mode must not be modified by the operation, make it const.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-19 21:52:38 -04:00
Daniel Kurtz 3bd7d90938 drm/i915/intel_i2c: refactor using intel_gmbus_get_adapter
Instead of letting other modules directly access the ->gmbus array,
introduce intel_gmbus_get_adapter() for looking up an i2c_adapter
for a given gmbus port identifier.  This will enable later refactoring
of the gmbus port list.

Note: Before requesting an adapter for a given gmbus port number, the
driver must first check its validity using i2c_intel_gmbus_is_port_valid().
If this check fails, a call to intel_gmbus_get_adapter() will WARN_ON and
return NULL.  This is relevant for parts of the driver that read a port
from VBIOS, which might be improperly initialized and contain an invalid
port.  In these cases, the driver must fall back to using a safer default
port.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-03-28 14:40:44 +02:00
Daniel Vetter ca9bfa7eed drm/i915: fixup interlaced vertical timings confusion, part 1
We have a pretty decent confusion about vertical timings of interlaced
modes. Peter Ross has written a patch that makes interlace modes work
on a lot more platforms/output combinations by doubling the vertical
timings.

The issue with that patch is that core drm _does_ support specifying
whether we want these vertical timings in fields or frames, we just
haven't managed to consistently use this facility. The relavant
function is drm_mode_set_crtcinfo, which fills in the crtc timing
information.

The first thing to note is that the drm core keeps interlaced modes in
frames, but displays modelines in fields. So when the crtc modeset
helper copies over the mode into adjusted_mode it will already contain
vertical timings in half-frames. The result is that the fixup code in
intel_crtc_mode_fixup doesn't actually do anything (in most cases at
least).

Now gen3+ natively supports interlaced modes and wants the vertical
timings in frames. Which is what sdvo already fixes up, at least under
some conditions.

There are a few other place that demand vertical timings in fields
but never actually deal with interlaced modes, so use frame timings
for consistency, too. These are:
- lvds panel,
- dvo encoders - dvo is the only way gen2 could support interlaced
  mode, but currently we don't support any encoders that do.
- tv out - despite that the tv dac sends out an interlaced signal it
  expects a progressive mode pipe configuration.
All these encoders enforce progressive modes by resetting
interlace_allowed.

Hence we always want crtc vertical timings in frames. Enforce this in
our crtc mode_fixup function and rip out any redudant timing
computations from the encoders' mode_fixup function.

v2-4: Adjust the vertical timings a bit.

v5: Split out the 'subtract-one for interlaced' fixes.

v6: Clarify issues around tv-out and gen2.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-10 17:24:06 +01:00
Jesse Barnes 9db4a9c7b2 drm/i915: cleanup per-pipe reg usage
We had some conversions over to the _PIPE macros, but didn't get
everything.  So hide the per-pipe regs with an _ (still used in a few
places for legacy) and add a few _PIPE based macros, then make sure
everyone uses them.

[update: remove usage of non-existent no-op macro]
[update 2: keep modesetting suspend/resume code, update to new reg names]
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[ickle: stylistic cleanups for checkpatch and taste]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07 21:17:15 +00:00
Chris Wilson f573c66061 drm/i915/dvo: Fix panel and DDC i2c pins
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-28 23:34:44 +01:00
Chris Wilson a6b17b4367 drm/i915: Use the correct DPB GMBUS port for GPIOE
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21 12:50:13 +01:00
Chris Wilson e9e5f8e8d3 Merge branch 'drm-intel-fixes' into HEAD
Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/i915/intel_crt.c
2010-09-21 11:19:32 +01:00
Chris Wilson f899fc64cd drm/i915: use GMBUS to manage i2c links
Use the GMBUS interface rather than direct bit banging to grab the EDID
over DDC (and for other forms of auxiliary communication with external
display controllers). The hope is that this method will be much faster
and more reliable than bit banging for fetching EDIDs from buggy monitors
or through switches, though we still preserve the bit banging as a
fallback in case GMBUS fails.

Based on an original patch by Jesse Barnes.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-18 15:46:19 +01:00
Chris Wilson 373a3cf744 drm/i915: call drm_encoder_init first
Later initialisation of the encoder often requires that
drm_encoder_init() has already been called, for instance, initialiasing
the DDC buses.

Yet another recent regression, as 819f3fb7 depended upon these fixes
which I missed when cherry-picking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-15 16:45:25 +01:00
Chris Wilson 890f3359f7 drm/i915/i2c: Track the parent encoder rather than just the dev
The SDVO proxy i2c adapter wants to be able to use information stored in
the encoder, so pass that through intel_i2c rather than iterate over all
known encoders every time.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-14 21:08:36 +01:00
Chris Wilson 930a9e2835 drm: Use a nondestructive mode for output detect when polling (v2)
v2: Julien Cristau pointed out that @nondestructive results in
double-negatives and confusion when trying to interpret the parameter,
so use @force instead. Much easier to type as well. ;-)

And fix the miscompilation of vmgfx reported by Sedat Dilek.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14 20:38:48 +10:00
Chris Wilson 7b334fcb45 drm: Use a nondestructive mode for output detect when polling
Destructive load-detection is very expensive and due to failings
elsewhere can trigger system wide stalls of up to 600ms. A simple
first step to correcting this is not to invoke such an expensive
and destructive load-detection operation automatically.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13 20:29:11 +10:00
Chris Wilson df0e924883 drm/i915: Make the connector->encoder relationship explicit
Currently we have a exact mapping of a connector onto an encoder for its
whole lifetime. Make this an explicit property of the structure and so
simplify the code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:43 +01:00
Chris Wilson f875c15a4f drm/i915: Use the direct mapping of pipe->crtc
Why iterate all the crtcs to find the pipe, when we already know which
crtc is attached to which pipe?

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:36 +01:00
Chris Wilson 4ef69c7a64 drm/i915: Rename intel_encoder->enc to base for consistency
[Patch is slightly larger than is strictly necessary to fixup
surrounding checkpatch.pl errors.]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-09 17:00:13 +01:00
Chris Wilson ea5b213ad4 drm/i915: Subclass intel_encoder.
Subclass intel_encoder to reduce the pointer dance through
intel_encoder->dev_priv.

10 files changed, 896 insertions(+), 997 deletions(-)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-09 11:24:28 -07:00
Dave Airlie 97921a5b03 Merge remote branch 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next into drm-core-next
* 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next: (48 commits)
  agp/intel-gtt: kill previous_size assignments
  agp/intel-gtt: kill intel_i830_tlbflush
  agp/intel: split out gmch/gtt probe, part 1
  agp/intel: kill mutli_gmch_chip
  agp/intel: uncoditionally reconfigure driver on resume
  agp/intel: split out the GTT support
  agp/intel: introduce intel-agp.h header file
  drm/i915: Don't touch PORT_HOTPLUG_EN in intel_dp_detect()
  drm/i915/pch: Use minimal number of FDI lanes (v2)
  drm/i915: Add the support of memory self-refresh on Ironlake
  drm/i915: Move Pineview CxSR and watermark code into update_wm hook.
  drm/i915: Only save/restore FBC on the platform that supports FBC
  drm/i915: Fix the incorrect argument for SDVO SET_TV_format command
  drm/i915: Add support of SDVO on Ibexpeak PCH
  drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on).
  drm/i915: do not read uninitialized ->dev_private
  Revert "drm/i915: Use a dmi quirk to skip a broken SDVO TV output."
  drm/i915: implement multifunction SDVO device support
  drm/i915: remove unused intel_pipe_get_connector()
  drm/i915: remove connector object in old output structure
  ...
2010-04-20 13:11:45 +10:00
Linus Torvalds 13bd8e4673 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Ignore LVDS EDID when it is unavailabe or invalid
  drm/i915: Add no_lvds entry for the Clientron U800
  drm/i915: Rename many remaining uses of "output" to encoder or connector.
  drm/i915: Rename intel_output to intel_encoder.
  agp/intel: intel_845_driver is an agp driver!
  drm/i915: introduce to_intel_bo helper
  drm/i915: Disable FBC on 915GM and 945GM.
2010-04-17 14:28:50 -07:00
Zhenyu Wang 599be16c6e drm/i915: convert DVO driver to new encoder/connector structure
Also remove old UMS copied code for get_crtc.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-12 09:23:52 -07:00
Eric Anholt 6443170f6d drm/i915: Remove dead KMS encoder save/restore code.
This was brought over from UMS, and used for a while until we decided
that drm_helper_resume_force_mode was easier and more reliable, since
it didn't require duplicating all the code deleted here.  We just
forgot to delete all that junk for a while.
2010-04-12 09:23:30 -07:00
Zhenyu Wang 335af9a235 drm/i915: change intel_ddc_get_modes() function parameters
This one replaces original param for intel_ddc_get_modes() with
DRM connector and i2c bus adapter instead. With explicit params,
we won't require that a single driver structure must hold connector
and DDC bus reference, which ease the conversion to splitted encoder/
connector model.

It also clears up for some cases that we would steal other DDC bus
for mode probe, like VGA analog DDC probe for DVI-I. Also it fixed
a bug in old DVI-I probe handling, that failed to restore origin
analog GPIO port.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-09 14:17:31 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Eric Anholt 21d40d37ec drm/i915: Rename intel_output to intel_encoder.
The intel_output naming is inherited from the UMS code, which had a
structure of screen -> CRTC -> output.  The DRM code has an additional
notion of encoder/connector, so the structure is screen -> CRTC ->
encoder -> connector.  This is a useful structure for SDVO encoders
which can support multiple connectors (each of which requires
different programming in the one encoder and could be connected to
different CRTCs), or for DVI-I, where multiple encoders feed into the
connector for whether it's used for digital or analog.  Most of our
code is encoder-related, so transition it to talking about encoders
before we start trying to distinguish connectors.

This patch is produced by sed s/intel_output/intel_encoder/ over the
driver.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-25 12:27:32 -07:00
Ma Ling f8aed700c6 drm/i915: Set crtc/clone mask in different output devices
Based on Bspec each encoder has different sharing pipe property,
i.e. Integrated or SDVO TV both will occupy one pipe exclusively,
and sdvo-non-tv and crt are allowed to share one. The patch moves
sharing judgment into differnet output functions, and sets the right
clone bit.

This fixes both HDMI outputs choosing the same pipe.

https://bugs.freedesktop.org/show_bug.cgi?id=22247

Signed-off-by: Ma Ling <ling.ma@intel.com>
Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 17:01:33 -07:00
Keith Packard f9c10a9b96 drm/i915: Change I2C api to pass around i2c_adapters
The existing API passed around intel_i2c_chan pointers, which are dependent
on the i2c bit-banging algo. This precluded the driver from using outputs
which use a different algo. Switching to the more general i2c_adpater allows
the driver to support non bit-banging DDC.

This also required moving the slave address into the output private
structures.

Signed-off-by: Keith Packard <keithp@keithp.com>
2009-06-18 15:53:57 -07:00
Keith Packard c9fb15f60e drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.
Making the drm_crtc.c code recognize the DPMS property and invoke the
connector->dpms function doesn't remove any capability from the driver while
reducing code duplication.

That just highlighted the problem with the existing DPMS functions which
could turn off the connector, but failed to turn off any relevant crtcs. The
new drm_helper_connector_dpms function manages all of that, using the
drm_helper-specific crtc and encoder dpms functions, automatically computing
the appropriate DPMS level for each object in the system.

This fixes the current troubles in the i915 driver which left PLLs, pipes
and planes running while in DPMS_OFF mode or even while they were unused.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-04 09:32:12 +10:00
Hannes Eder 606df4e024 drm/i915: fix sparse warnings: move 'extern' decls to header file
Move 'extern'-decls from "intel_dvo.c" to "dvo.h", as "dvo.h" is
included by and only by files where the symbols are either defined or
used.

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29 17:47:26 +10:00
Hannes Eder b358d0a625 drm/i915: fix sparse warnings: make symbols static
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29 17:47:26 +10:00
Jesse Barnes 79e539453b DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00