Adding FILTER_TRACE_FN event field type for function tracepoint
event, so it can be properly recognized within filtering code.
Currently all fields of ftrace subsystem events share the common
field type FILTER_OTHER. Since the function trace fields need
special care within the filtering code we need to recognize it
properly, hence adding the FILTER_TRACE_FN event type.
Adding filter parameter to the FTRACE_ENTRY macro, to specify the
filter field type for the event.
Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding FTRACE_ENTRY_REG macro so particular ftrace entries
could specify registration function and thus become accesible
via perf.
This will be used in upcomming patch for function trace.
Link: http://lkml.kernel.org/r/1329317514-8131-5-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding a way to temporarily enable/disable ftrace_ops. The change
follows the same way as 'global' ftrace_ops are done.
Introducing 2 global ftrace_ops - control_ops and ftrace_control_list
which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL
flag. In addition new per cpu flag called 'disabled' is also added to
ftrace_ops to provide the control information for each cpu.
When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is
set as disabled for all cpus.
The ftrace_control_list contains all the registered 'control' ftrace_ops.
The control_ops provides function which iterates ftrace_control_list
and does the check for 'disabled' flag on current cpu.
Adding 3 inline functions:
ftrace_function_local_disable/ftrace_function_local_enable
- enable/disable the ftrace_ops on current cpu
ftrace_function_local_disabled
- get disabled ftrace_ops::disabled value for current cpu
Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
reiserfs: Properly display mount options in /proc/mounts
vfs: prevent remount read-only if pending removes
vfs: count unlinked inodes
vfs: protect remounting superblock read-only
vfs: keep list of mounts for each superblock
vfs: switch ->show_options() to struct dentry *
vfs: switch ->show_path() to struct dentry *
vfs: switch ->show_devname() to struct dentry *
vfs: switch ->show_stats to struct dentry *
switch security_path_chmod() to struct path *
vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
vfs: trim includes a bit
switch mnt_namespace ->root to struct mount
vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
vfs: opencode mntget() mnt_set_mountpoint()
vfs: spread struct mount - remaining argument of next_mnt()
vfs: move fsnotify junk to struct mount
vfs: move mnt_devname
vfs: move mnt_list to struct mount
vfs: switch pnode.h macros to struct mount *
...
People keep asking how to get the preempt count, irq, and need resched info
and we keep telling them to enable the latency format. Some developers think
that traces without this info is completely useless, and for a lot of tasks
it is useless.
The first option was to enable the latency trace as the default format, but
the header for the latency format is pretty useless for most tracers and
it also does the timestamp in straight microseconds from the time the trace
started. This is sometimes more difficult to read as the default trace is
seconds from the start of boot up.
Latency format:
# tracer: nop
#
# nop latency trace v1.1.5 on 3.2.0-rc1-test+
# --------------------------------------------------------------------
# latency: 0 us, #159771/64234230, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| / delay
# cmd pid ||||| time | caller
# \ / ||||| \ | /
migratio-6 0...2 41778231us+: rcu_note_context_switch <-__schedule
migratio-6 0...2 41778233us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778235us+: rcu_sched_qs <-rcu_note_context_switch
migratio-6 0d..2 41778236us+: rcu_preempt_qs <-rcu_note_context_switch
migratio-6 0...2 41778238us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778239us+: debug_lockdep_rcu_enabled <-__schedule
default format:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The latency format header has latency information that is pretty meaningless
for most tracers. Although some of the header is useful, and we can add that
later to the default format as well.
What is really useful with the latency format is the irqs-off, need-resched
hard/softirq context and the preempt count.
This commit adds the option irq-info which is on by default that adds this
information:
# tracer: nop
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [000] d..2 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] d..2 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] d..2 49.309309: need_resched <-mwait_idle
<idle>-0 [000] d..2 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] d..2 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] d..2 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] d..2 49.309315: need_resched <-mwait_idle
If a user wants the old format, they can disable the 'irq-info' option:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<idle>-0 [000] 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] 49.309309: need_resched <-mwait_idle
<idle>-0 [000] 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] 49.309315: need_resched <-mwait_idle
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the function tracer is very intrusive, lots of self checks are
performed on the tracer and if something is found to be strange
it will shut itself down keeping it from corrupting the rest of the
kernel. This shutdown may still allow functions to be traced, as the
tracing only stops new modifications from happening. Trying to stop
the function tracer itself can cause more harm as it requires code
modification.
Although a WARN_ON() is executed, a user may not notice it. To help
the user see that something isn't right with the tracing of the system
a big warning is added to the output of the tracer that lets the user
know that their data may be incomplete.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding automated tests running as late_initcall. Tests are
compiled in with CONFIG_FTRACE_STARTUP_TEST option.
Adding test event "ftrace_test_filter" used to simulate
filter processing during event occurance.
String filters are compiled and tested against several
test events with different values.
Also testing that evaluation of explicit predicates is ommited
due to the lazy filter evaluation.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-11-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The field_name was used just for finding event's fields. This way we
don't need to care about field_name allocation/free.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-4-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a function is set to be traced by the set_graph_function, but the
option funcgraph-irqs is zero, and the traced function happens to be
called from a interrupt, it will not be traced.
The point of funcgraph-irqs is to not trace interrupts when we are
preempted by an irq, not to not trace functions we want to trace that
happen to be *in* a irq.
Luckily the current->trace_recursion element is perfect to add a flag
to help us be able to trace functions within an interrupt even when
we are not tracing interrupts that preempt the trace.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event system is freed when its nr_events is set to zero. This happens
when a module created an event system and then later the module is
removed. Modules may share systems, so the system is allocated when
it is created and freed when the modules are unloaded and all the
events under the system are removed (nr_events set to zero).
The problem arises when a task opened the "filter" file for the
system. If the module is unloaded and it removed the last event for
that system, the system structure is freed. If the task that opened
the filter file accesses the "filter" file after the system has
been freed, the system will access an invalid pointer.
By adding a ref_count, and using it to keep track of what
is using the event system, we can free it after all users
are finished with the event system.
Cc: <stable@kernel.org>
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix to support kernel stack trace correctly on kprobe-tracer.
Since the execution path of kprobe-based dynamic events is different
from other tracepoint-based events, normal ftrace_trace_stack() doesn't
work correctly. To fix that, this introduces ftrace_trace_stack_regs()
which traces stack via pt_regs instead of current stack register.
e.g.
# echo p schedule+4 > /sys/kernel/debug/tracing/kprobe_events
# echo 1 > /sys/kernel/debug/tracing/options/stacktrace
# echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
# head -n 20 /sys/kernel/debug/tracing/trace
bash-2968 [000] 10297.050245: p_schedule_4: (schedule+0x4/0x4ca)
bash-2968 [000] 10297.050247: <stack trace>
=> schedule_timeout
=> n_tty_read
=> tty_read
=> vfs_read
=> sys_read
=> system_call_fastpath
kworker/0:1-2940 [000] 10297.050265: p_schedule_4: (schedule+0x4/0x4ca)
kworker/0:1-2940 [000] 10297.050266: <stack trace>
=> worker_thread
=> kthread
=> kernel_thread_helper
sshd-1132 [000] 10297.050365: p_schedule_4: (schedule+0x4/0x4ca)
sshd-1132 [000] 10297.050365: <stack trace>
=> sysret_careful
Note: Even with this fix, the first entry will be skipped
if the probe is put on the function entry area before
the frame pointer is set up (usually, that is 4 bytes
(push %bp; mov %sp %bp) on x86), because stack unwinder
depends on the frame pointer.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/20110608070934.17777.17116.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a trace option to disable tracing on free. When this option is
set, a write into the free_buffer file will not only shrink the
ring buffer down to zero, but it will also disable tracing.
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Witold reported a reboot caused by the selftests of the dynamic function
tracer. He sent me a config and I used ktest to do a config_bisect on it
(as my config did not cause the crash). It pointed out that the problem
config was CONFIG_PROVE_RCU.
What happened was that if multiple callbacks are attached to the
function tracer, we iterate a list of callbacks. Because the list is
managed by synchronize_sched() and preempt_disable, the access to the
pointers uses rcu_dereference_raw().
When PROVE_RCU is enabled, the rcu_dereference_raw() calls some
debugging functions, which happen to be traced. The tracing of the debug
function would then call rcu_dereference_raw() which would then call the
debug function and then... well you get the idea.
I first wrote two different patches to solve this bug.
1) add a __rcu_dereference_raw() that would not do any checks.
2) add notrace to the offending debug functions.
Both of these patches worked.
Talking with Paul McKenney on IRC, he suggested to add recursion
detection instead. This seemed to be a better solution, so I decided to
implement it. As the task_struct already has a trace_recursion to detect
recursion in the ring buffer, and that has a very small number it
allows, I decided to use that same variable to add flags that can detect
the recursion inside the infrastructure of the function tracer.
I plan to change it so that the task struct bit can be checked in
mcount, but as that requires changes to all archs, I will hold that off
to the next merge window.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1306348063.1465.116.camel@gandalf.stny.rr.com
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the filter logic does not require to save the pred results
on the stack, we can increase the max number of preds we allow.
As the preds are index by a short value, and we use the MSBs as flags
we can increase the max preds to 2^14 (16384) which should be way
more than enough.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The MAX_FILTER_PRED is only needed by the kernel/trace/*.c files.
Move it to kernel/trace/trace.h.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are many cases that a filter will contain multiple ORs or
ANDs together near the leafs. Walking up and down the tree to get
to the next compare can be a waste.
If there are several ORs or ANDs together, fold them into a single
pred and allocate an array of the conditions that they check.
This will speed up the filter by linearly walking an array
and can still break out if a short circuit condition is met.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the filter_match_preds() requires a stack to push
and pop the preds to determine if the filter matches the record or not.
This has two drawbacks:
1) It requires a stack to store state information. As this is done
in fast paths we can't allocate the storage for this stack, and
we can't use a global as it must be re-entrant. The stack is stored
on the kernel stack and this greatly limits how many preds we
may allow.
2) All conditions are calculated even when a short circuit exists.
a || b will always calculate a and b even though a was determined
to be true.
Using a tree we can walk a constant structure that will save
the state as we go. The algorithm is simply:
pred = root;
do {
switch (move) {
case MOVE_DOWN:
if (OR or AND) {
pred = left;
continue;
}
if (pred == root)
break;
match = pred->fn();
pred = pred->parent;
move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
continue;
case MOVE_UP_FROM_LEFT:
/* Only OR or AND can be a parent */
if (match && OR || !match && AND) {
/* short circuit */
if (pred == root)
break;
pred = pred->parent;
move = left child ?
MOVE_UP_FROM_LEFT :
MOVE_UP_FROM_RIGHT;
continue;
}
pred = pred->right;
move = MOVE_DOWN;
continue;
case MOVE_UP_FROM_RIGHT:
if (pred == root)
break;
pred = pred->parent;
move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
continue;
}
done = 1;
} while (!done);
This way there's no strict limit to how many preds we allow
and it also will short circuit the logical operations when possible.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we allocate an array of pointers to filter_preds, and then
allocate a separate filter_pred for each item in the array.
This adds slight overhead in the filters as it needs to derefernce
twice to get to the op condition.
Allocating the preds themselves in a single array removes a dereference
as well as helps on the cache footprint.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For every filter that is made, we create predicates to hold every
operation within the filter. We have a max of 32 predicates that we
can hold. Currently, we allocate all 32 even if we only need to
use one.
Part of the reason we do this is that the filter can be used at
any moment by any event. Fortunately, the filter is only used
with preemption disabled. By reseting the count of preds used "n_preds"
to zero, then performing a synchronize_sched(), we can safely
free and reallocate a new array of preds.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ops OR and AND act different from the other ops, as they
are the only ones to take other ops as their arguements.
These ops als change the logic of the filter_match_preds.
By removing the OR and AND fn's we can also remove the val1 and val2
that is passed to all other fn's and are unused.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move trace_graph_function() and print_graph_headers_flags() functions
to the trace_function_graph.c to be globaly available.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
tracing/kprobes: unregister_trace_probe needs to be called under mutex
perf: expose event__process function
perf events: Fix mmap offset determination
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
perf, powerpc: Convert the FSL driver to use local64_t
perf tools: Don't keep unreferenced maps when unmaps are detected
perf session: Invalidate last_match when removing threads from rb_tree
perf session: Free the ref_reloc_sym memory at the right place
x86,mmiotrace: Add support for tracing STOS instruction
perf, sched migration: Librarize task states and event headers helpers
perf, sched migration: Librarize the GUI class
perf, sched migration: Make the GUI class client agnostic
perf, sched migration: Make it vertically scrollable
perf, sched migration: Parameterize cpu height and spacing
perf, sched migration: Fix key bindings
perf, sched migration: Ignore unhandled task states
perf, sched migration: Handle ignored migrate out events
perf: New migration tool overview
tracing: Drop cpparg() macro
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
...
Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
Add in a helper function to allow the kdb shell to dump the ftrace
buffer.
Modify trace.c to expose the capability to iterate over the ftrace
buffer in a read only capacity.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Documentation/trace/ftrace.txt says
buffer_size_kb:
This sets or displays the number of kilobytes each CPU
buffer can hold. The tracer buffers are the same size
for each CPU. The displayed number is the size of the
CPU buffer and not total size of all buffers. The
trace buffers are allocated in pages (blocks of memory
that the kernel uses for allocation, usually 4 KB in size).
If the last page allocated has room for more bytes
than requested, the rest of the page will be used,
making the actual allocation bigger than requested.
( Note, the size may not be a multiple of the page size
due to buffer management overhead. )
This can only be updated when the current_tracer
is set to "nop".
But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.
Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.
That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.
Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.
This patch shrink buffer size of the max latency buffer if
unnecessary.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We found that even enabling a single trace event that will rarely be
triggered can add big overhead to context switch.
(lmbench context switch test)
-------------------------------------------------
2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw
------ ------ ------ ------ ------ ------- -------
2.19 2.3 2.21 2.56 2.13 2.54 2.07
2.39 2.51 2.35 2.75 2.27 2.81 2.24
The overhead is 6% ~ 11%.
It's because when a trace event is enabled 3 tracepoints (sched_switch,
sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname.
We'd like to avoid this overhead, so add a trace option '(no)record-cmd'
to allow to disable cmdline recording.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Special traces type was only used by sysprof. Lets remove it now
that sysprof ftrace plugin has been dropped.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.
Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Every event has the same common fields, so it's a big waste of
memory to have a copy of those fields for every event.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3759.30105@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.
Nobody seem to be using it so far. Then just remove it.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).
The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.
This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.
This bug would cause a missed preemption check and cause lower latencies.
Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_trace_stack() and frace_trace_userstacke() take a
struct ring_buffer argument, not struct trace_array. Commit
e77405ad("tracing: pass around ring buffer instead of tracer")
made this change.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BE77C14.5010806@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The filter_active and enable both use an int (4 bytes each) to
set a single flag. We can save 4 bytes per event by combining the
two into a single integer.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4894944 1018052 861512 6774508 675eec vmlinux.id
4894871 1012292 861512 6768675 674823 vmlinux.flags
This gives us another 5K in savings.
The modification of both the enable and filter fields are done
under the event_mutex, so it is still safe to combine the two.
Note: Although Mathieu gave his Acked-by, he would like it documented
that the reads of flags are not protected by the mutex. The way the
code works, these reads will not break anything, but will have a
residual effect. Since this behavior is the same even before this
patch, describing this situation is left to another patch, as this
patch does not change the behavior, but just brought it to Mathieu's
attention.
v2: Updated the event trace self test to for this change.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.
After this change the size of the kernel dropped another 3K:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900252 1057412 861512 6819176 680d68 vmlinux.regs
4900375 1053380 861512 6815267 67fe23 vmlinux.fields
Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.
Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.
The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.
The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.
v2: Fixed the syscall fields. The syscall metadata needs a list
of fields for both enter and exit.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function graph output to irqsoff tracer.
The graph output is enabled by setting new 'display-graph' trace option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Let the function graph tracer have custom flags passed to its
output functions.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Support basic types of integer (u8, u16, u32, u64, s8, s16, s32, s64) in
kprobe tracer. With this patch, users can specify above basic types on
each arguments after ':'. If omitted, the argument type is set as
unsigned long (u32 or u64, arch-dependent).
e.g.
echo 'p account_system_time+0 hardirq_offset=%si:s32' > kprobe_events
adds a probe recording hardirq_offset in signed-32bits value on the
entry of account_system_time.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171708.3790.18599.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.
It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.
Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.
So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Do not record user stack trace from NMI context
tracing: Disable buffer switching when starting or stopping trace
tracing: Use same local variable when resetting the ring buffer
function-graph: Init curr_ret_stack with ret_stack
ring-buffer: Move disabled check into preempt disable section
function-graph: Add tracing_thresh support to function_graph tracer
tracing: Update the comm field in the right variable in update_max_tr
function-graph: Use comment notation for func names of dangling '}'
function-graph: Fix unused reference to ftrace_set_func()
tracing: Fix warning in s_next of trace file ops
tracing: Include irqflags headers from trace clock
Add support for tracing_thresh to the function_graph tracer. This
version of this feature isolates the checks into new entry and
return functions, to avoid adding more conditional code into the
main function_graph paths.
When the tracing_thresh is set and the function graph tracer is
enabled, only the functions that took longer than the time in
microseconds that was set in tracing_thresh are recorded. To do this
efficiently, only the function exits are recorded:
[tracing]# echo 100 > tracing_thresh
[tracing]# echo function_graph > current_tracer
[tracing]# cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) ! 119.214 us | } /* smp_apic_timer_interrupt */
1) <========== |
0) ! 101.527 us | } /* __rcu_process_callbacks */
0) ! 126.461 us | } /* rcu_process_callbacks */
0) ! 145.111 us | } /* __do_softirq */
0) ! 149.667 us | } /* do_softirq */
0) ! 168.817 us | } /* irq_exit */
0) ! 248.254 us | } /* smp_apic_timer_interrupt */
Also, add support for specifying tracing_thresh on the kernel
command line. When used like so: "tracing_thresh=200 ftrace=function_graph"
this can be used to analyse system startup. It is important to disable
tracing soon after boot, in order to avoid losing the trace data.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4B87098B.4040308@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
GCC 4.5 introduces behavior that forces the alignment of structures to
use the largest possible value. The default value is 32 bytes, so if
some structures are defined with a 4-byte alignment and others aren't
declared with an alignment constraint at all - it will align at 32-bytes.
For things like the ftrace events, this results in a non-standard array.
When initializing the ftrace subsystem, we traverse the _ftrace_events
section and call the initialization callback for each event. When the
structures are misaligned, we could be treating another part of the
structure (or the zeroed out space between them) as a function pointer.
This patch forces the alignment for all the ftrace_event_call structures
to 4 bytes.
Without this patch, the kernel fails to boot very early when built with
gcc 4.5.
It's trivial to check the alignment of the members of the array, so it
might be worthwhile to add something to the build system to do that
automatically. Unfortunately, that only covers this case. I've asked one
of the gcc developers about adding a warning when this condition is seen.
Cc: stable@kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
LKML-Reference: <4B85770B.6010901@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I don't see why we can only clear all functions from the filter.
After patching:
# echo sys_open > set_graph_function
# echo sys_close >> set_graph_function
# cat set_graph_function
sys_open
sys_close
# echo '!sys_close' >> set_graph_function
# cat set_graph_function
sys_open
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B726388.2000408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some misspelled occurences of 'octet' and some comments were also fixed
as I was on it.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In the function graph tracer, a calling function is to be traced
only when it is enabled through the set_graph_function file,
or when it is nested in an enabled function.
Current code uses TSK_TRACE_FL_GRAPH to test whether it is nested
or not. Looking at the code, we can get this:
(trace->depth > 0) <==> (TSK_TRACE_FL_GRAPH is set)
trace->depth is more explicit to tell that it is nested.
So we use trace->depth directly and simplify the code.
No functionality is changed.
TSK_TRACE_FL_GRAPH is not removed yet, it is left for future usage.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B4DB0B6.7040607@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix return of trace_dump_stack()
ksym_tracer: Fix bad cast
tracing/power: Remove two exports
tracing: Change event->profile_count to be int type
tracing: Simplify trace_option_write()
tracing: Remove useless trace option
tracing: Use seq file for trace_clock
tracing: Use seq file for trace_options
function-graph: Allow writing the same val to set_graph_function
ftrace: Call trace_parser_clear() properly
ftrace: Return EINVAL when writing invalid val to set_ftrace_filter
tracing: Move a printk out of ftrace_raw_reg_event_foo()
tracing: Pull up calls to trace_define_common_fields()
tracing: Extract duplicate ftrace_raw_init_event_foo()
ftrace.h: Use common pr_info fmt string
tracing: Add stack trace to irqsoff tracer
tracing: Add trace_dump_stack()
ring-buffer: Move resize integrity check under reader lock
ring-buffer: Use sync sched protection on ring buffer resizing
tracing: Fix wrong usage of strstrip in trace_ksyms
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
m68k: rename global variable vmalloc_end to m68k_vmalloc_end
percpu: add missing per_cpu_ptr_to_phys() definition for UP
percpu: Fix kdump failure if booted with percpu_alloc=page
percpu: make misc percpu symbols unique
percpu: make percpu symbols in ia64 unique
percpu: make percpu symbols in powerpc unique
percpu: make percpu symbols in x86 unique
percpu: make percpu symbols in xen unique
percpu: make percpu symbols in cpufreq unique
percpu: make percpu symbols in oprofile unique
percpu: make percpu symbols in tracer unique
percpu: make percpu symbols under kernel/ and mm/ unique
percpu: remove some sparse warnings
percpu: make alloc_percpu() handle array types
vmalloc: fix use of non-existent percpu variable in put_cpu_var()
this_cpu: Use this_cpu_xx in trace_functions_graph.c
this_cpu: Use this_cpu_xx for ftrace
this_cpu: Use this_cpu_xx in nmi handling
this_cpu: Use this_cpu operations in RCU
this_cpu: Use this_cpu ops for VM statistics
...
Fix up trivial (famous last words) global per-cpu naming conflicts in
arch/x86/kvm/svm.c
mm/slab.c
An ftrace plugin can add a pipe_open interface when the user opens
trace_pipe. But if the plugin allocates something within the pipe_open
it can not free it because there exists no pipe_close. The hook to
the trace file open has a corresponding close. The closing of the
trace_pipe file should also have a corresponding close.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit ee949a86b3 ("tracing/syscalls:
Use long for syscall ret format and field definitions") changed the
syscall exit return type to long, but forgot to change it in the
struct.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259133299-23594-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/kprobes.c
kernel/trace/Makefile
Merge reason: hw-breakpoints perf integration is looking
good in testing and in reviews, plus conflicts
are mounting up - so merge & resolve.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The macro used to be used in both trace_selftest.c and
trace_ksym.c, but no longer, so remove it from header file.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch rebase the implementation of the breakpoints API on top of
perf events instances.
Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..
The new layering is now made as follows:
ptrace kgdb ftrace perf syscall
\ | / /
\ | / /
/
Core breakpoint API /
/
| /
| /
Breakpoints perf events
|
|
Breakpoints PMU ---- Debug Register constraints handling
(Part of core breakpoint API)
|
|
Hardware debug registers
Reasons of this rewrite:
- Use the centralized/optimized pmu registers scheduling,
implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
events, exclusive/non-exclusive, tunable period, etc...)
Impact:
- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
thread breakpoints references.
Todo (in the order):
- Support breakpoints perf counter events for perf tools (ie: implement
perf_bpcounter_event())
- Support from perf tools
Changes in v2:
- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
perf_event_attr.
- Separate core and arch specific headers, drop
asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch
Changes in v3:
- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
changes to kvm when we exit the guest and restore the bp registers
to the host.
Changes in v4:
- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
module
- Restore the breakpoints unconditionally on kvm guest exit:
TIF_DEBUG_THREAD doesn't anymore cover every cases of running
breakpoints and vcpu->arch.switch_db_regs might not always be
set when the guest used debug registers.
(Waiting for a reliable optimization)
Changes in v5:
- Split-up the asm-generic/hw-breakpoint.h moving to
linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
to host. We only want to restore the state if we have active
breakpoints to the host, otherwise we don't care about messed-up
address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c
Changes in v6:
- Fix wrong header inclusion in trace.h (triggered a build
error with CONFIG_FTRACE_SELFTEST
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Conflicts:
tools/perf/Makefile
Merge reason:
- fix the conflict
- pick up the pr_*() infrastructure to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
kernel/Makefile
kernel/trace/Makefile
kernel/trace/trace.h
samples/Makefile
Merge reason: We need to be uptodate with the perf events development
branch because we plan to rewrite the breakpoints API on top of
perf events.
- Add an ioctl to allocate a filter for a perf event.
- Free the filter when the associated perf event is to be freed.
- Do the filtering in perf_swevent_match().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"==" will always do a full match, and "~" will do a glob match.
In the future, we may add "=~" for regex match.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69528.3050309@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change:
for_each_pred
for_each_subsystem
To:
for_each_subsystem
for_each_pred
This change also prepares for later patches.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69502.8060903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the ftrace_trace_addr() function as only its off-case is
implemented and there are no users of it currently.
But we keep ftrace_graph_addr() off-case, in case someone come to use
the function graph tracer to profit from top-level callers filtering.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
this_cpu_xx can reduce the instruction count here and also
avoid address arithmetic.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
The filter code has stolen the regex parsing function from ftrace to
get the regex support.
We have duplicated this code, so factorize it in the filter area and
make it generally available, as the filter code is the most suited to
host this feature.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
This patch provides basic support for regular expressions in filters.
It supports the following types of regexp:
- *match_beginning
- *match_middle*
- match_end*
- !don't match
Example:
cd /debug/tracing/events/bkl/lock_kernel
echo 'file == "*reiserfs*"' > filter
echo 1 > enable
gedit-4941 [000] 457.735437: lock_kernel: depth: 0, fs/reiserfs/namei.c:334 reiserfs_lookup()
sync_supers-227 [001] 461.379985: lock_kernel: depth: 0, fs/reiserfs/super.c:69 reiserfs_sync_fs()
sync_supers-227 [000] 461.383096: lock_kernel: depth: 0, fs/reiserfs/journal.c:1069 flush_commit_list()
reiserfs/1-1369 [001] 461.479885: lock_kernel: depth: 0, fs/reiserfs/journal.c:3509 flush_async_commits()
Every string is now handled as a regexp in the filter framework, which
helps to factorize the code for handling both simple strings and
regexp comparisons.
(The regexp parsing code has been wildly cherry picked from ftrace.c
written by Steve.)
v2: Simplify the whole and drop the filter_regex file
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".
This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch changes the way the format files in
debugfs/tracing/events/ftrace/*/format
are created. It uses the new trace_entries.h file to automate the
creation of the format files to ensure that they are always in sync
with the actual structures. This is the same methodology used to
create the format files for the TRACE_EVENT macro.
This also updates the filter creation that was built on the creation
of the format files.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some of the internal ftrace structures use structures within. The
output of a field saying it is just a structure is useless for a format
file. A binary reader of the ring buffer needs to know more about
how the fields are broken up.
This patch adds to the ftrace structure macros new fields to
describe the structures inside a structure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries used by ftrace internal code (plugins) currently have their
formats manually exported to userspace. That is, the format files in
debugfs/tracing/events/ftrace/*/format are currently created by hand.
This is a maintenance nightmare, and can easily become out of sync
with what is actually shown.
This patch uses the methodology of the TRACE_EVENT macros to build
the structures so that their formats can be automated and this
will keep the structures in sync with what users can see.
This patch only changes the way the structures are created. Further
patches will build off of this to automate the format files.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The state of the function pair tracing_stop()/tracing_start() is
correctly considered when tracer data are updated. However, the global
and externally accessible variable tracing_max_latency is always updated
- even when tracing is stopped.
The update should only occur, if tracing was not stopped.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Create a "trace_parser" that can parse the user space input for
separate words.
struct trace_parser is the descriptor.
Generic "trace_get_user" function that can be a helper to read multiple
words passed in by user space.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The userstack trace required the recording of the tgid entry.
Unfortunately, it was added to the generic entry where it wasted
4 bytes of every entry and was only used by one entry.
This patch moves it out of the generic field and moves it into the
only user (userstack_entry).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
kernel/trace/trace_export.c
kernel/trace/trace_kprobe.c
Merge reason: This topic branch lacks an important
build fix in tracing/core:
0dd7b74787eaf7858c6c573353a83c3e2766e674:
tracing: Fix double CPP substitution in TRACE_EVENT_FN
that prevents from multiple tracepoint headers inclusion crashes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Move DEFINE_COMPARISON_PRED() and DEFINE_EQUALITY_PRED()
to kernel/trace/trace_events_filter.c
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove unused field @stats from struct tracer.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
arch/Kconfig
kernel/trace/trace.h
Merge reason: resolve the conflicts, plus adopt to the new
ring-buffer APIs.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a trace_array_printk to allow a tracer to use the
trace_printk on its own trace array.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.
This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the latency tracers reset the ring buffer. Unfortunately
if a commit is in process (due to a trace event), this can corrupt
the ring buffer. When this happens, the ring buffer will detect
the corruption and then permanently disable the ring buffer.
The bug does not crash the system, but it does prevent further tracing
after the bug is hit.
Instead of reseting the trace buffers, the timestamp of the start of
the trace is used instead. The buffers will still contain the previous
data, but the output will not count any data that is before the
timestamp of the trace.
Note, this only affects the static trace output (trace) and not the
runtime trace output (trace_pipe). The runtime trace output does not
make sense for the latency tracers anyway.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
During development of the tracer, we would copy information from
the live tracer to the max tracer with one memcpy. Since then we
added a generic ring buffer and we handle the copies differently now.
Unfortunately, we never copied the critical section information, and
we lost the output:
# => started at: kmem_cache_alloc
# => ended at: kmem_cache_alloc
This patch adds back the critical start and end copying as well as
removes the unused "trace_idx" and "overrun" fields of the
trace_array_cpu structure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_max_latency file should only be present when one of the
latency tracers ({preempt|irqs}off, wakeup*) are enabled.
This patch also removes tracing_thresh when latency tracers are not
enabled, as well as compiles out code that is only used for latency
tracers.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Assign new event ids for each kprobes event. This doesn't clear
ring_buffer when unregistering each kprobe event. Thus, if you mind
'Unknown event' messages, clear the buffer manually after changing
kprobe events.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203534.31965.49105.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add kprobes-based event tracer on ftrace.
This tracer is similar to the events tracer which is based on Tracepoint
infrastructure. Instead of Tracepoint, this tracer is based on kprobes
(kprobe and kretprobe). It probes anywhere where kprobes can probe(this
means, all functions body except for __kprobes functions).
Similar to the events tracer, this tracer doesn't need to be activated
via current_tracer, instead of that, just set probe points via
/sys/kernel/debug/tracing/kprobe_events. And you can set filters on each
probe events via /sys/kernel/debug/tracing/events/kprobes/<EVENT>/filter.
This tracer supports following probe arguments for each probe.
%REG : Fetch register REG
sN : Fetch Nth entry of stack (N >= 0)
sa : Fetch stack address.
@ADDR : Fetch memory at ADDR (ADDR should be in kernel)
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
aN : Fetch function argument. (N >= 0)
rv : Fetch return value.
ra : Fetch return address.
+|-offs(FETCHARG) : fetch memory at FETCHARG +|- offs address.
See Documentation/trace/kprobetrace.txt in the next patch for details.
Changes from v13:
- Support 'sa' for stack address.
- Use call->data instead of container_of() macro.
[fweisbec@gmail.com: Fixed conflict against latest tracing/core]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203510.31965.29123.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
There are many clock sources for the tracing system but we can only
enable/disable one at a time with the trace/options file.
We can move the setting of clock-source out of options and add a separate
file for it:
# cat trace_clock
[local] global
# echo global > trace_clock
# cat trace_clock
local [global]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
LKML-Reference: <4A939D08.6050604@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The type of a field is stored as a string in @type, and here
we add @filter_type which is an enum value.
This prepares for later patches, so we can specifically assign
different @filter_type for the same @type.
For example normally a "char *" field is treated as a ptr,
but we may want it to be treated as a string when doing filting.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B925E.9030605@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current state of syscalls tracepoints generates only one event id
for every syscall events.
This patch associates an id with each syscall trace event, so that we
can identify each syscall trace event using the 'perf' tool.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch implements the kernel side support for ftrace event
record sampling.
A new counter sampling attribute is added:
PERF_SAMPLE_TP_RECORD
which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.
Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:
perf record -f -F 1 -a -e workqueue:workqueue_execution
perf report -D
0x21e18 [0x48]: event: 9
.
. ... raw event: size 72 bytes
. 0000: 09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff ......H........
. 0010: 0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00 ........!......
. 0020: 2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e +...........eve
. 0030: 74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00 ts/1...........
. 0040: e0 b1 31 81 ff ff ff ff .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33
The raw ftrace binary record starts at offset 0020.
Translation:
struct trace_entry {
type = 0x2b = 43;
flags = 1;
preempt_count = 2;
pid = 0xa = 10;
tgid = 0xa = 10;
}
thread_comm = "events/1"
thread_pid = 0xa = 10;
func = 0xffffffff8131b1e0 = flush_to_ldisc()
What will come next?
- Userspace support ('perf trace'), 'flight data recorder' mode
for perf trace, etc.
- The unconditional copy from the profiling callback brings
some costs however if someone wants no such sampling to
occur, and needs to be fixed in the future. For that we need
to have an instant access to the perf counter attribute.
This is a matter of a flag to add in the struct ftrace_event.
- Take care of the events recursivity! Don't ever try to record
a lock event for example, it seems some locking is used in
the profiling fast path and lead to a tracing recursivity.
That will be fixed using raw spinlock or recursivity
protection.
- [...]
- Profit! :-)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function graph events helpers which insert the function entry and
return events into the ring buffer currently reside in trace.c
But this file is quite overloaded and the right place for these helpers
is in the function graph tracer file.
Then move them to trace_functions_graph.c
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Make the stacktrace event insertion helpers globals.
This has two effects:
- Prepare for moving the sched events insertion helpers to
the sched switch tracer file.
- Move some ifdef outside function definitions
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
In order to prepare the moving of the function graph tracer insertion
helpers from trace.c to trace_functions_graph.c, we need to export the
ftrace_cpu_disabled variable.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Currently a subsystem filter should be applicable to all events
under the subsystem, and if it failed, all the event filters
will be cleared. Those behaviors make subsys filter much less
useful:
# echo 'vec == 1' > irq/softirq_entry/filter
# echo 'irq == 5' > irq/filter
bash: echo: write error: Invalid argument
# cat irq/softirq_entry/filter
none
I'd expect it set the filter for irq_handler_entry/exit, and
not touch softirq_entry/exit.
The basic idea is, try to see if the filter can be applied
to which events, and then just apply to the those events:
# echo 'vec == 1' > softirq_entry/filter
# echo 'irq == 5' > filter
# cat irq_handler_entry/filter
irq == 5
# cat softirq_entry/filter
vec == 1
Changelog for v2:
- do some cleanups to address Frederic's comments.
Inspired-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A63D485.7030703@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
struct trace_ksym is used as an entry in hbp list, and is also
used as trace_entry stored in ring buffer.
This is not necessary and is a waste of memory in ring buffer.
There is also a bug that dereferencing field->ksym_hbp in
ksym_trace_output() can be invalid.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A52E2A4.4050007@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove empty subsystem and its directory when module unload.
Before patch:
# rmmod trace-events-sample.ko
# ls sample
enable filter
After patch:
# rmmod trace-events-sample.ko
# ls sample
ls: cannot access sample: No such file or directory
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A55A8BE.9010707@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We already have ftrace= boot option, and this adds a similar
boot option for trace events, so allow trace events to be
enabled at boot, for boot debugging purpose.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4ACE29.3010407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In hunting down the cause for the hwlat_detector ring buffer spew in
my failed -next builds it became obvious that folks are now treating
ring_buffer as something that is generic independent of tracing and thus,
suitable for public driver consumption.
Given that there are only a few minor areas in ring_buffer that have any
reliance on CONFIG_TRACING or CONFIG_FUNCTION_TRACER, provide stubs for
those and make it generally available.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jon Masters <jcm@jonmasters.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090625053012.GB19944@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds an ftrace plugin to detect and profile memory access over kernel
variables. It uses HW Breakpoint interfaces to 'watch memory addresses.
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Merge reason: this topic is ready for upstream now. It passed
Oleg's review and Andrew had no further mm/*
objections/observations either.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan found that there's a race using the event ids of events and
modules. When a module is loaded, an event id is incremented. We only
have 16 bits for event ids (65536) and there is a possible (but highly
unlikely) race that we could load and unload a module that registers
events so many times that the event id counter overflows.
When it overflows, it then restarts and goes looking for available
ids. An id is available if it was added by a module and released.
The race is if you have one module add an id, and then is removed.
Another module loaded can use that same event id. But if the old module
still had events in the ring buffer, the new module's call back would
get bogus data. At best (and most likely) the output would just be
garbage. But if the module for some reason used pointers (not recommended)
then this could potentially crash.
The safest thing to do is just reset the ring buffer if a module that
registered events is removed.
[ Impact: prevent unpredictable results of event id overflows ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49FEAFD0.30106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A module will add/remove its trace events when it gets loaded/unloaded, so
the ftrace_events list is not "const", and concurrent access needs to be
protected.
This patch thus fixes races between loading/unloding modules and read
'available_events' or read/write 'set_event', etc.
Below shows how to reproduce the race:
# for ((; ;)) { cat /mnt/tracing/available_events; } > /dev/null &
# for ((; ;)) { insmod trace-events-sample.ko; rmmod sample; } &
After a while:
BUG: unable to handle kernel paging request at 0010011c
IP: [<c1080f27>] t_next+0x1b/0x2d
...
Call Trace:
[<c10c90e6>] ? seq_read+0x217/0x30d
[<c10c8ecf>] ? seq_read+0x0/0x30d
[<c10b4c19>] ? vfs_read+0x8f/0x136
[<c10b4fc3>] ? sys_read+0x40/0x65
[<c1002a68>] ? sysenter_do_call+0x12/0x36
[ Impact: fix races when concurrent accessing ftrace_events list ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A00F709.3080800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace the current event parser hack with a better one. Filters are
no longer specified predicate by predicate, but all at once and can
use parens and any of the following operators:
numeric fields:
==, !=, <, <=, >, >=
string fields:
==, !=
predicates can be combined with the logical operators:
&&, ||
examples:
"common_preempt_count > 4" > filter
"((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
If there was an error, the erroneous string along with an error
message can be seen by looking at the filter e.g.:
((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
^
parse_error: Field not found
Currently the caret for an error always appears at the beginning of
the filter; a real position should be used, but the error message
should be useful even without it.
To clear a filter, '0' can be written to the filter file.
Filters can also be set or cleared for a complete subsystem by writing
the same filter as would be written to an individual event to the
filter file at the root of the subsytem. Note however, that if any
event in the subsystem lacks a field specified in the filter being
set, the set will fail and all filters in the subsytem are
automatically cleared. This change from the previous version was made
because using only the fields that happen to exist for a given event
would most likely result in a meaningless filter.
Because the logical operators are now implemented as predicates, the
maximum number of predicates in a filter was increased from 8 to 16.
[ Impact: add new, extended trace-filter implementation ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905899.6416.121.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new filter comparison ops need to be able to distinguish between
signed and unsigned field types, so add an is_signed flag/param to the
event field struct/trace_define_fields(). Also define a simple macro,
is_signed_type() to determine the signedness at compile time, used in the
trace macros. If the is_signed_type() macro won't work with a specific
type, a new slightly modified version of TRACE_FIELD() called
TRACE_FIELD_SIGN(), allows the signedness to be set explicitly.
[ Impact: extend trace-filter code for new feature ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905893.6416.120.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a new event_filter object, and move the pred-related members
out of the call and subsystem objects and into the filter object - the
details of the filter implementation don't need to be exposed in the
call and subsystem in any case, and it will also help make the new
parser implementation a little cleaner.
[ Impact: refactor trace-filter code to prepare for new features ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905887.6416.119.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/ptrace.c
Merge reason: fix the conflict above, and also pick up the CONFIG_BROKEN
dependency change from upstream so that we can remove it
here.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
struct trace_entry->type is unsigned char, while trace event's id is
int type, thus for a event with id >= 256, it's entry->type is cast
to (id % 256), and then we can't see the trace output of this event.
# insmod trace-events-sample.ko
# echo foo_bar > /mnt/tracing/set_event
# cat /debug/tracing/events/trace-events-sample/foo_bar/id
256
# cat /mnt/tracing/trace_pipe
<...>-3548 [001] 215.091142: Unknown type 0
<...>-3548 [001] 216.089207: Unknown type 0
<...>-3548 [001] 217.087271: Unknown type 0
<...>-3548 [001] 218.085332: Unknown type 0
[ Impact: fix output for trace events with id >= 256 ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49EEDB0E.5070207@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a filter_mutex to prevent the filter predicates from
being accessed concurrently by various external functions.
It's based on a previous patch by Li Zefan:
"[PATCH 7/7] tracing/filters: make filter preds RCU safe"
v2 changes:
- fixed wrong value returned in a add_subsystem_pred() failure case
noticed by Li Zefan.
[ Impact: fix trace filter corruption/crashes on parallel access ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239946028.6639.13.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: makes it possible to define events in modules
The events are created by reading down the section that they are linked
in by the macros. But this is not scalable to modules. This patch converts
the manipulations to use a global link list, and on boot up it adds
the items in the section to the list.
This change will allow modules to add their tracing events to the list as
well.
Note, this change alone does not permit modules to use the TRACE_EVENT macros,
but the change is needed for them to eventually do so.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation to allowing trace events to happen in modules, we need
to move some of the local declarations in the kernel/trace directory
into include/linux.
This patch simply moves the declarations and performs no context changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the process to make TRACE_EVENT macro work for modules, the trace_seq
operations must be available for core kernel code.
These operations are quite useful and can be used for other implementations.
The main idea is that we create a trace_seq handle that acts very much
like the seq_file handle.
struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL);
trace_seq_init(s);
trace_seq_printf(s, "some data %d\n", variable);
printk("%s", s->buffer);
The main use is to allow a top level function call several other functions
that may store printf like data into the buffer. Then at the end, the top
level function can process all the data with any method it would like to.
It could be passed to userspace, output via printk or even use seq_file:
trace_seq_to_user(s, ubuf, cnt);
seq_puts(m, s->buffer);
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch allows event filters to be safely removed or switched
on-the-fly while avoiding the use of rcu or the suspension of tracing of
previous versions.
It does it by adding a new filter_pred_none() predicate function which
does nothing and by never deallocating either the predicates or any of
the filter_pred members used in matching; the predicate lists are
allocated and initialized during ftrace_event_calls initialization.
Whenever a filter is removed or replaced, the filter_pred_* functions
currently in use by the affected ftrace_event_call are immediately
switched over to to the filter_pred_none() function, while the rest of
the filter_pred members are left intact, allowing any currently
executing filter_pred_* functions to finish up, using the values they're
currently using.
In the case of filter replacement, the new predicate values are copied
into the old predicates after the above step, and the filter_pred_none()
functions are replaced by the filter_pred_* functions for the new
filter. In this case, it is possible though very unlikely that a
previous filter_pred_* is still running even after the
filter_pred_none() switch and the switch to the new filter_pred_*. In
that case, however, because nothing has been deallocated in the
filter_pred, the worst that can happen is that the old filter_pred_*
function sees the new values and as a result produces either a false
positive or a false negative, depending on the values it finds.
So one downside to this method is that rarely, it can produce a bad
match during the filter switch, but it should be possible to live with
that, IMHO.
The other downside is that at least in this patch the predicate lists
are always pre-allocated, taking up memory from the start. They could
probably be allocated on first-use, and de-allocated when tracing is
completely stopped - if this patch makes sense, I could create another
one to do that later on.
Oh, and it also places a restriction on the size of __arrays in events,
currently set to 128, since they can't be larger than the now embedded
str_val arrays in the filter_pred struct.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239610670.6660.49.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch changes filter_check_discard() to make use of the new
ring_buffer_discard_commit() function and modifies the current users to
call the old commit function in the non-discard case.
It also introduces a version of filter_check_discard() that uses the
global trace buffer (filter_current_check_discard()) for those cases.
v2 changes:
- fix compile error noticed by Ingo Molnar
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178554.10295.36.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ring_buffer_discard_commit makes better usage of the ring_buffer
when an event has been discarded. It tries to remove it completely if
possible.
This patch converts the trace event filtering to use
ring_buffer_discard_commit instead of the ring_buffer_event_discard.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker suggested that the trace_special event shouldn't be
filterable; this patch adds a TRACE_EVENT_FORMAT_NOFILTER event macro
that allows an event format to be exported without having a filter
attached, and removes filtering from the trace_special event.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds run-time field descriptions to all the event formats
exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers
that use them (i.e. the tracers in the 'ftrace subsystem') so they can
also have their output filtered by the event-filtering mechanism.
When I was testing this, there were a couple of things that fooled me
into thinking the filters weren't working, when actually they were -
I'll mention them here so others don't make the same mistakes (and file
bug reports. ;-)
One is that some of the tracers trace multiple events e.g. the
sched_switch tracer uses the context_switch and wakeup events, and if
you don't set filters on all of the traced events, the unfiltered output
from the events without filters on them can make it look like the
filtering as a whole isn't working properly, when actually it is doing
what it was asked to do - it just wasn't asked to do the right thing.
The other is that for the really high-volume tracers e.g. the function
tracer, the volume of filtered events can be so high that it pushes the
unfiltered events out of the ring buffer before they can be read so e.g.
cat'ing the trace file repeatedly shows either no output, or once in
awhile some output but that isn't there the next time you read the
trace, which isn't what you normally expect when reading the trace file.
If you read from the trace_pipe file though, you can catch them before
they disappear.
Changes from v1:
As suggested by Frederic Weisbecker:
- get rid of externs in functions
- added unlikely() to filter_check_discard()
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: refactor code for future changes
Current kmemtrace.h is used both as header file of kmemtrace and kmem's
tracepoints definition.
Tracepoints' definition file may be used by other code, and should only have
definition of tracepoint.
We can separate include/trace/kmemtrace.h into 2 files:
include/linux/kmemtrace.h: header file for kmemtrace
include/trace/kmem.h: definition of kmem tracepoints
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49DEE68A.5040902@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y
branch tracer: Fix for enabling branch profiling makes sparse unusable
ftrace: Correct a text align for event format output
Update /debug/tracing/README
tracing/ftrace: alloc the started cpumask for the trace file
tracing, x86: remove duplicated #include
ftrace: Add check of sched_stopped for probe_sched_wakeup
function-graph: add proper initialization for init task
tracing/ftrace: fix missing include string.h
tracing: fix incorrect return type of ns2usecs()
tracing: remove CALLER_ADDR2 from wakeup tracer
blktrace: fix pdu_len when tracing packet command requests
blktrace: small cleanup in blk_msg_write()
blktrace: NUL-terminate user space messages
tracing: move scripts/trace/power.pl to scripts/tracing/power.pl
Impact: cleanup
Most of the tracing files creation follow the same pattern:
ret = debugfs_create_file(...)
if (!ret)
pr_warning("Couldn't create ... entry\n")
Unify it!
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238109938-11840-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: fix time output bug in 32bits system
ns2usecs() returns 'long', it's incorrect.
(In i386)
...
<idle>-0 [000] 521.442100: _spin_lock <-tick_do_update_jiffies64
<idle>-0 [000] 521.442101: do_timer <-tick_do_update_jiffies64
<idle>-0 [000] 521.442102: update_wall_time <-do_timer
<idle>-0 [000] 521.442102: update_xtime_cache <-update_wall_time
....
(It always print the time less than 2200 seconds besides ...)
Because 'long' is 32bits in i386. ( (1<<31) useconds is about 2200 seconds)
...
<idle>-0 [001] 4154502640.134759: rcu_bh_qsctr_inc <-__do_softirq
<idle>-0 [001] 4154502640.134760: _local_bh_enable <-__do_softirq
<idle>-0 [001] 4154502640.134761: idle_cpu <-irq_exit
...
(very large value)
Because 'long' is a signed type and it is 32bits in i386.
Changes in v2:
return 'unsigned long long' instead of 'cycle_t'
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49D05D10.4030009@cn.fujitsu.com>
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kmemtrace now uses tracepoints instead of markers. We no longer need to
use format specifiers to pass arguments.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
[ folded: Use the new TP_PROTO and TP_ARGS to fix the build. ]
[ folded: fix build when CONFIG_KMEMTRACE is disabled. ]
[ folded: define tracepoints when CONFIG_TRACEPOINTS is enabled. ]
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <ae61c0f37156db8ec8dc0d5778018edde60a92e3.1237813499.git.eduard.munteanu@linux360.ro>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
graph time is the time that a function is executing another function.
Thus if function A calls B, if graph-time is set, then the time for
A includes B. This is the default behavior. But if graph-time is off,
then the time spent executing B is subtracted from A.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
If the function graph trace is enabled, the function profiler will
use it to take the timing of the functions.
cat /debug/tracing/trace_stat/functions
Function Hit Time
-------- --- ----
mwait_idle 127 183028.4 us
schedule 26 151997.7 us
__schedule 31 151975.1 us
sys_wait4 2 74080.53 us
do_wait 2 74077.80 us
sys_newlstat 138 39929.16 us
do_path_lookup 179 39845.79 us
vfs_lstat_fd 138 39761.97 us
user_path_at 153 39469.58 us
path_walk 179 39435.76 us
__link_path_walk 189 39143.73 us
[...]
Note the times are skewed due to the function graph tracer not taking
into account schedules.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: give user a choice to show times spent while sleeping
The user may want to see the time a function spent sleeping.
This patch adds the trace option "sleep-time" to allow that.
The "sleep-time" option is default on.
echo sleep-time > /debug/tracing/trace_options
produces:
------------------------------------------
2) avahi-d-3428 => <idle>-0
------------------------------------------
2) | finish_task_switch() {
2) 0.621 us | _spin_unlock_irq();
2) 2.202 us | }
2) ! 1002.197 us | }
2) ! 1003.521 us | }
where as,
echo nosleep-time > /debug/tracing/trace_options
produces:
0) <idle>-0 => yum-upd-3416
------------------------------------------
0) | finish_task_switch() {
0) 0.643 us | _spin_unlock_irq();
0) 2.342 us | }
0) + 41.302 us | }
0) + 42.453 us | }
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
Instead of just using the trace_seq buffer to print the filters, use
trace_seq_printf() as it was intended to be used.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: =?ISO-8859-1?Q?Fr=E9d=E9ric?= Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237878871.8339.59.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix hard-lockup with sched switch events
Some ftrace events, such as sched wakeup, can be traced
while the runqueue lock is hold. Since they are using
trace_current_buffer_unlock_commit(), they call wake_up()
which can try to grab the runqueue lock too, resulting in
a deadlock.
Now for all event, we call a new helper:
trace_nowake_buffer_unlock_commit() which do pretty the same than
trace_current_buffer_unlock_commit() except than it doesn't call
trace_wake_up().
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237759847-21025-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds per-subsystem filtering to the event tracing subsystem.
It adds a 'filter' debugfs file to each subsystem directory. This file
can be written to to set filters; reading from it will display the
current set of filters set for that subsystem.
Basically what it does is propagate the filter down to each event
contained in the subsystem. If a particular event doesn't have a field
with the name specified in the filter, it simply doesn't get set for
that event. You can verify whether or not the filter was set for a
particular event by looking at the filter file for that event.
As with per-event filters, compound expressions are supported, echoing
'0' to the subsystem's filter file clears all filters in the subsystem,
etc.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710677.7703.49.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds per-event filtering to the event tracing subsystem.
It adds a 'filter' debugfs file to each event directory. This file can
be written to to set filters; reading from it will display the current
set of filters set for that event.
Basically, any field listed in the 'format' file for an event can be
filtered on (including strings, but not yet other array types) using
either matching ('==') or non-matching ('!=') 'predicates'. A
'predicate' can be either a single expression:
# echo pid != 0 > filter
# cat filter
pid != 0
or a compound expression of up to 8 sub-expressions combined using '&&'
or '||':
# echo comm == Xorg > filter
# echo "&& sig != 29" > filter
# cat filter
comm == Xorg
&& sig != 29
Only events having field values matching an expression will be available
in the trace output; non-matching events are discarded.
Note that a compound expression is built up by echoing each
sub-expression separately - it's not the most efficient way to do
things, but it keeps the parser simple and assumes that compound
expressions will be relatively uncommon. In any case, a subsequent
patch introducing a way to set filters for entire subsystems should
mitigate any need to do this for lots of events.
Setting a filter without an '&&' or '||' clears the previous filter
completely and sets the filter to the new expression:
# cat filter
comm == Xorg
&& sig != 29
# echo comm != Xorg
# cat filter
comm != Xorg
To clear a filter, echo 0 to the filter file:
# echo 0 > filter
# cat filter
none
The limit of 8 predicates for a compound expression is arbitrary - for
efficiency, it's implemented as an array of pointers to predicates, and
8 seemed more than enough for any filter...
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710665.7703.48.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch makes the field descriptions defined for event tracing
available at run-time, for the event-filtering mechanism introduced
in a subsequent patch.
The common event fields are prepended with 'common_' in the format
display, allowing them to be distinguished from the other fields
that might internally have same name and can therefore be
unambiguously used in filters.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710639.7703.46.camel@charm-linux>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new tracing infrastructure feature
Provide infrastructure to generate software perf counter events
from tracepoints.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090319194233.557364871@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function depth in trace_printk was to facilitate the function
graph output. Now that the function graph calculates the depth within
the trace output, we no longer need to record the depth when the
trace_printk is called.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: feature to allow better serialized clock
This patch adds an option called "global-clock" that will allow
the tracer to switch to a slower but more accurate (across CPUs)
clock.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to one cause of incorrect comm outputs in trace
The spinlock only protected the creation of a comm <=> pid pair.
But it was possible that a reader could look up a pid, and get the
wrong comm because it had no locking.
This also required changing trace_find_cmdline to copy the comm cache
and not just send back a pointer to it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: new feature
This adds the generic support for syscalls tracing. This is
currently exploited through a devoted tracer but other tracing
engines can use it. (They just have to play with
{start,stop}_ftrace_syscalls() and use the display callbacks
unless they want to override them.)
The syscalls prototypes definitions are abused here to steal
some metadata informations:
- syscall name, param types, param names, number of params
The syscall addr is not directly saved during this definition
because we don't know if its prototype is available in the
namespace. But we don't really need it. The arch has just to
build a function able to resolve the syscall number to its
metadata struct.
The current tracer prints the syscall names, parameters names
and values (and their types optionally). Currently the value is
a raw hex but higher level values diplaying is on my TODO list.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1236955332-10133-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a selftest for the hw-branch-tracer.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
LKML-Reference: <20090313105027.A30183@sedona.ch.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Provide basic callbacks to do syscall tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-2-git-send-email-fweisbec@gmail.com>
[ simplified it to a trace_printk() for now. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: documentation
The use of the double __builtin_contant_p checks in the event_trace_printk
can be confusing to developers and reviewers. This patch adds a comment
to explain why it is there.
Requested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20090313122235.43EB.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: speed up on event tracing
The event_trace_printk is currently a wrapper function that calls
trace_vprintk. Because it uses a variable for the fmt it misses out
on the optimization of using the binary printk.
This patch makes event_trace_printk into a macro wrapper to use the
fmt as the same as the trace_printks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix callsites with dynamic format strings
Since its new binary implementation, trace_printk() internally uses static
containers for the format strings on each callsites. But the value is
assigned once at build time, which means that it can't take dynamic
formats.
So this patch unearthes the raw trace_printk implementation for the callers
that will need trace_printk to be able to carry these dynamic format
strings. The trace_printk() macro will use the appropriate implementation
for each callsite. Most of the time however, the binary implementation will
still be used.
The other impact of this patch is that mmiotrace_printk() will use the old
implementation because it calls the low level trace_vprintk and we can't
guess here whether the format passed in it is dynamic or not.
Some parts of this patch have been written by Steven Rostedt (most notably
the part that chooses the appropriate implementation for each callsites).
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
To save memory, the tracer ring buffers are set to a minimum.
The activating of a trace expands the ring buffer size. This patch
adds this expanding, when an event is activated.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up and enhancement
The TRACE_EVENT_FORMAT macro looks quite ugly and is limited in its
ability to save data as well as to print the record out. Working with
Ingo Molnar, we came up with a new format that is much more pleasing to
the eye of C developers. This new macro is more C style than the old
macro, and is more obvious to what it does.
Here's the example. The only updated macro in this patch is the
sched_switch trace point.
The old method looked like this:
TRACE_EVENT_FORMAT(sched_switch,
TP_PROTO(struct rq *rq, struct task_struct *prev,
struct task_struct *next),
TP_ARGS(rq, prev, next),
TP_FMT("task %s:%d ==> %s:%d",
prev->comm, prev->pid, next->comm, next->pid),
TRACE_STRUCT(
TRACE_FIELD(pid_t, prev_pid, prev->pid)
TRACE_FIELD(int, prev_prio, prev->prio)
TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN],
next_comm,
TP_CMD(memcpy(TRACE_ENTRY->next_comm,
next->comm,
TASK_COMM_LEN)))
TRACE_FIELD(pid_t, next_pid, next->pid)
TRACE_FIELD(int, next_prio, next->prio)
),
TP_RAW_FMT("prev %d:%d ==> next %s:%d:%d")
);
The above method is hard to read and requires two format fields.
The new method:
/*
* Tracepoint for task switches, performed by the scheduler:
*
* (NOTE: the 'rq' argument is not used by generic trace events,
* but used by the latency tracer plugin. )
*/
TRACE_EVENT(sched_switch,
TP_PROTO(struct rq *rq, struct task_struct *prev,
struct task_struct *next),
TP_ARGS(rq, prev, next),
TP_STRUCT__entry(
__array( char, prev_comm, TASK_COMM_LEN )
__field( pid_t, prev_pid )
__field( int, prev_prio )
__array( char, next_comm, TASK_COMM_LEN )
__field( pid_t, next_pid )
__field( int, next_prio )
),
TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
__entry->next_comm, __entry->next_pid, __entry->next_prio),
TP_fast_assign(
memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
__entry->prev_pid = prev->pid;
__entry->prev_prio = prev->prio;
memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
__entry->next_pid = next->pid;
__entry->next_prio = next->prio;
)
);
This macro is called TRACE_EVENT, it is broken up into 5 parts:
TP_PROTO: the proto type of the trace point
TP_ARGS: the arguments of the trace point
TP_STRUCT_entry: the structure layout of the entry in the ring buffer
TP_printk: the printk format
TP_fast_assign: the method used to write the entry into the ring buffer
The structure is the definition of how the event will be saved in the
ring buffer. The printk is used by the internal tracing in case of
an oops, and the kernel needs to print out the format of the record
to the console. This the TP_printk gives a means to show the records
in a human readable format. It is also used to print out the data
from the trace file.
The TP_fast_assign is executed directly. It is basically like a C function,
where the __entry is the handle to the record.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
Remove a few leftovers and clean up the code a bit.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: faster and lighter tracing
Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.
Some changes result of this:
- Previously, trace_bprintk depended of a single tracer and couldn't
work without. This tracer has been dropped and the whole implementation
of trace_printk() (like the module formats management) is now integrated
in the tracing core (comes with CONFIG_TRACING), though we keep the file
trace_printk (previously trace_bprintk.c) where we can find the module
management. Thus we don't overflow trace.c
- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.
- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
constants, and fix 'const' qualifiers warnings. But this is all transparent for
developers.
- etc...
V2:
- Rebase against last changes
- Fix mispell on the changelog
V3:
- Rebase against last changes (moving trace_printk() to kernel.h)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: save on memory for tracing
Current tracers are typically using a struct(like struct ftrace_entry,
struct ctx_switch_entry, struct special_entr etc...)to record a binary
event. These structs can only record a their own kind of events.
A new kind of tracer need a new struct and a lot of code too handle it.
So we need a generic binary record for events. This infrastructure
is for this purpose.
[fweisbec@gmail.com: rebase against latest -tip, make it safe while sched
tracing as reported by Steven Rostedt]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Use a more generic name - this also allows the prototype to move
to kernel.h and be generally available to kernel developers who
want to do some quick tracing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the removal of the latency_trace file, we lost the ability
to see some of the finer details in a trace. Like the state of
interrupts enabled, the preempt count, need resched, and if we
are in an interrupt handler, softirq handler or not.
This patch simply creates an option to bring back the old format.
This also removes the warning about an unused variable that held
the latency_trace file operations.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: new feature
This patch creates a directory of files that correspond to the
per CPU ring buffers. These are binary files and are made to
be used with splice. This is the fastest way to extract data from
the ftrace ring buffers.
Thanks to Jiaying Zhang for pushing me to get this code fixed,
and to Eduard - Gabriel Munteanu for his splice code that helped
me debug my code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds the "format" file to the trace point event directory.
This is based off of work by Tom Zanussi, in which a file is exported
to be tread from user land such that a user space app may read the
binary record stored in the ring buffer.
# cat /debug/tracing/events/sched/sched_switch/format
field:pid_t prev_pid; offset:12; size:4;
field:int prev_prio; offset:16; size:4;
field special:char next_comm[TASK_COMM_LEN]; offset:20; size:16;
field:pid_t next_pid; offset:36; size:4;
field:int next_prio; offset:40; size:4;
Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
The trace_seq functions may be used separately outside of the ftrace
iterator. The trace_seq_reset is needed for these operations.
This patch also renames trace_seq_reset to the more appropriate
trace_seq_init.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds the interface to enable the C style trace points.
In the directory /debugfs/tracing/events/subsystem/event
We now have three files:
enable : values 0 or 1 to enable or disable the trace event.
available_types: values 'raw' and 'printf' which indicate the tracing
types available for the trace point. If a developer does not
use the TRACE_EVENT_FORMAT macro and just uses the TRACE_FORMAT
macro, then only 'printf' will be available. This file is
read only.
type: values 'raw' or 'printf'. This indicates which type of tracing
is active for that trace point. 'printf' is the default and
if 'raw' is not available, this file is read only.
# echo raw > /debug/tracing/events/sched/sched_wakeup/type
# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
Will enable the C style tracing for the sched_wakeup trace point.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: lower overhead tracing
The current event tracer can automatically pick up trace points
that are registered with the TRACE_FORMAT macro. But it required
a printf format string and parsing. Although, this adds the ability
to get guaranteed information like task names and such, it took
a hit in overhead processing. This processing can add about 500-1000
nanoseconds overhead, but in some cases that too is considered
too much and we want to shave off as much from this overhead as
possible.
Tom Zanussi recently posted tracing patches to lkml that are based
on a nice idea about capturing the data via C structs using
STRUCT_ENTER, STRUCT_EXIT type of macros.
I liked that method very much, but did not like the implementation
that required a developer to add data/code in several disjoint
locations.
This patch extends the event_tracer macros to do a similar "raw C"
approach that Tom Zanussi did. But instead of having the developers
needing to tweak a bunch of code all over the place, they can do it
all in one macro - preferably placed near the code that it is
tracing. That makes it much more likely that tracepoints will be
maintained on an ongoing basis by the code they modify.
The new macro TRACE_EVENT_FORMAT is created for this approach. (Note,
a developer may still utilize the more low level DECLARE_TRACE macros
if they don't care about getting their traces automatically in the event
tracer.)
They can also use the existing TRACE_FORMAT if they don't need to code
the tracepoint in C, but just want to use the convenience of printf.
So if the developer wants to "hardwire" a tracepoint in the fastest
possible way, and wants to acquire their data via a user space utility
in a raw binary format, or wants to see it in the trace output but not
sacrifice any performance, then they can implement the faster but
more complex TRACE_EVENT_FORMAT macro.
Here's what usage looks like:
TRACE_EVENT_FORMAT(name,
TPPROTO(proto),
TPARGS(args),
TPFMT(fmt, fmt_args),
TRACE_STUCT(
TRACE_FIELD(type1, item1, assign1)
TRACE_FIELD(type2, item2, assign2)
[...]
),
TPRAWFMT(raw_fmt)
);
Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT
uses.
name: is the unique identifier of the trace point
proto: The proto type that the trace point uses
args: the args in the proto type
fmt: printf format to use with the event printf tracer
fmt_args: the printf argments to match fmt
TRACE_STRUCT starts the ability to create a structure.
Each item in the structure is defined with a TRACE_FIELD
TRACE_FIELD(type, item, assign)
type: the C type of item.
item: the name of the item in the stucture
assign: what to assign the item in the trace point callback
raw_fmt is a way to pretty print the struct. It must match
the order of the items are added in TRACE_STUCT
An example of this would be:
TRACE_EVENT_FORMAT(sched_wakeup,
TPPROTO(struct rq *rq, struct task_struct *p, int success),
TPARGS(rq, p, success),
TPFMT("task %s:%d %s",
p->comm, p->pid, success?"succeeded":"failed"),
TRACE_STRUCT(
TRACE_FIELD(pid_t, pid, p->pid)
TRACE_FIELD(int, success, success)
),
TPRAWFMT("task %d success=%d")
);
This creates us a unique struct of:
struct {
pid_t pid;
int success;
};
And the way the call back would assign these values would be:
entry->pid = p->pid;
entry->success = success;
The nice part about this is that the creation of the assignent is done
via macro magic in the event tracer. Once the TRACE_EVENT_FORMAT is
created, the developer will then have a faster method to record
into the ring buffer. They do not need to worry about the tracer itself.
The developer would only need to touch the files in include/trace/*.h
Again, I would like to give special thanks to Tom Zanussi for this
nice idea.
Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.
But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Now that several per-cpu files can be read or spliced at the
same, we want the read/splice callbacks for tracing files to be
reentrants.
Until now, a single global mutex (trace_types_lock) serialized
the access to tracing_read_pipe(), tracing_splice_read_pipe(),
and the seq helpers.
Ie: it means that if a user tries to read trace_pipe0 and
trace_pipe1 at the same time, the access to the function
tracing_read_pipe() is contended and one reader must wait for
the other to finish its read call.
The trace_type_lock mutex is mostly here to serialize the access
to the global current tracer (current_trace), which can be
changed concurrently. Although the iter struct keeps a private
pointer to this tracer, its callbacks can be changed by another
function.
The method used here is to not keep anymore private reference to
the tracer inside the iterator but to make a copy of it inside
the iterator. Then it checks on subsequents read calls if the
tracer has changed. This is not costly because the current
tracer is not expected to be changed often, so we use a branch
prediction for that.
Moreover, we add a private mutex to the iterator (there is one
iterator per file descriptor) to serialize the accesses in case
of multiple consumers per file descriptor (which would be a
silly idea from the user). Note that this is not to protect the
ring buffer, since the ring buffer already serializes the
readers accesses. This is to prevent from traces weirdness in
case of concurrent consumers. But these mutexes can be dropped
anyway, that would not result in any crash. Just tell me what
you think about it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: split up tracing output per cpu
Currently, on the tracing debugfs directory, three files are
available to the user to let him extracting the trace output:
- trace is an iterator through the ring-buffer. It's a reader
but not a consumer It doesn't block when no more traces are
available.
- trace pretty similar to the former, except that it adds more
informations such as prempt count, irq flag, ...
- trace_pipe is a reader and a consumer, it will also block
waiting for traces if necessary (heh, yes it's a pipe).
The traces coming from different cpus are curretly mixed up
inside these files. Sometimes it messes up the informations,
sometimes it's useful, depending on what does the tracer
capture.
The tracing_cpumask file is useful to filter the output and
select only the traces captured a custom defined set of cpus.
But still it is not enough powerful to extract at the same time
one trace buffer per cpu.
So this patch creates a new directory: /debug/tracing/per_cpu/.
Inside this directory, you will now find one trace_pipe file and
one trace file per cpu.
Which means if you have two cpus, you will have:
trace0
trace1
trace_pipe0
trace_pipe1
And of course, reading these files will have the same effect
than with the usual tracing files, except that you will only see
the traces from the given cpu.
The original all-in-one cpu trace file are still available on
their original place.
Until now, only one consumer was allowed on trace_pipe to avoid
racy consuming on the ring-buffer. Now the approach changed a
bit, you can have only one consumer per cpu.
Which means you are allowed to read concurrently trace_pipe0 and
trace_pipe1 But you can't have two readers on trace_pipe0 or
trace_pipe1.
Following the same logic, if there is one reader on the common
trace_pipe, you can not have at the same time another reader on
trace_pipe0 or in trace_pipe1. Because in trace_pipe is already
a consumer in all cpu buffers in essence.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: api and pipe waiting change
Currently, the waiting used in tracing_read_pipe() is done through a
100 msecs schedule_timeout() loop which periodically check if there
are traces on the buffer.
This can cause small latencies for programs which are reading the incoming
events.
This patch makes the reader waiting for the trace_wait waitqueue except
for few tracers such as the sched and functions tracers which might be
already hold the runqueue lock while waking up the reader.
This is performed through a new callback wait_pipe() on struct tracer.
If none is implemented on a specific tracer, the default waiting for
trace_wait queue is attached.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Added and implemented tracing_pipe_fops->splice_read(). This allows
userspace programs to get tracing data more efficiently.
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
When one cats the trace file, the leaf functions are printed without brackets:
function();
whereas in the trace_pipe file we'll see the following:
function() {
}
This is because the ring_buffer handling is not the same between those two files.
On the trace file, when an entry is printed, the iterator advanced and then we can
check the next entry.
There is no iterator with trace_pipe, the current entry to print has been peeked
and not consumed. So checking the next entry will still return the current one while
we don't consume it.
This patch introduces a new value for the output callbacks to ask the tracing
core to not consume the current entry after printing it.
We need it because we will have to consume the current entry ourself to check
the next one.
Now the trace_pipe is able to handle well the leaf functions.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Move the power tracer headers to trace/power.h to keep ftrace.h and power bits
more easy to maintain as separated topics.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Making it more easy to do a basic regression test for this tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Fixed several typos in the comments.
Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to prevent developers from using entry->cpu
With the new ring buffer infrastructure, the cpu for the entry is
implicit with which CPU buffer it is on.
The original code use to record the current cpu into the generic
entry header, which can be retrieved by entry->cpu. When the
ring buffer was introduced, the users were convert to use the
the cpu number of which cpu ring buffer was in use (this was passed
to the tracers by the iterator: iter->cpu).
Unfortunately, the cpu item in the entry structure was never removed.
This allowed for developers to use it instead of the proper iter->cpu,
unknowingly, using an uninitialized variable. This was not the fault
of the developers, since it would seem like the logical place to
retrieve the cpu identifier.
This patch removes the cpu item from the entry structure and fixes
all the users that should have been using iter->cpu.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: cleanup
To make it easy for ftrace plugin writers, as this was open coded in
the existing plugins
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new API
These new functions do what previously was being open coded, reducing
the number of details ftrace plugin writers have to worry about.
It also standardizes the handling of stacktrace, userstacktrace and
other trace options we may introduce in the future.
With this patch, for instance, the blk tracer (and some others already
in the tree) can use the "userstacktrace" /d/tracing/trace_options
facility.
$ codiff /tmp/vmlinux.before /tmp/vmlinux.after
linux-2.6-tip/kernel/trace/trace.c:
trace_vprintk | -5
trace_graph_return | -22
trace_graph_entry | -26
trace_function | -45
__ftrace_trace_stack | -27
ftrace_trace_userstack | -29
tracing_sched_switch_trace | -66
tracing_stop | +1
trace_seq_to_user | -1
ftrace_trace_special | -63
ftrace_special | +1
tracing_sched_wakeup_trace | -70
tracing_reset_online_cpus | -1
13 functions changed, 2 bytes added, 355 bytes removed, diff: -353
linux-2.6-tip/block/blktrace.c:
__blk_add_trace | -58
1 function changed, 58 bytes removed, diff: -58
linux-2.6-tip/kernel/trace/trace.c:
trace_buffer_lock_reserve | +88
trace_buffer_unlock_commit | +86
2 functions changed, 174 bytes added, diff: +174
/tmp/vmlinux.after:
16 functions changed, 176 bytes added, 413 bytes removed, diff: -237
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: make trace_event more convenient for tracers
All tracers (for the moment) that use the struct trace_event want to
have the context info printed before their own output: the pid/cmdline,
cpu, and timestamp.
But some other tracers that want to implement their trace_event
callbacks will not necessary need these information or they may want to
format them as they want.
This patch adds a new default-enabled trace option:
TRACE_ITER_CONTEXT_INFO When disabled through:
echo nocontext-info > /debugfs/tracing/trace_options
The pid, cpu and timestamps headers will not be printed.
IE with the sched_switch tracer with context-info (default):
bash-2935 [001] 100.356561: 2935:120:S ==> [001] 0:140:R <idle>
<idle>-0 [000] 100.412804: 0:140:R + [000] 11:115:S events/0
<idle>-0 [000] 100.412816: 0:140:R ==> [000] 11:115:R events/0
events/0-11 [000] 100.412829: 11:115:S ==> [000] 0:140:R <idle>
Without context-info:
2935:120:S ==> [001] 0:140:R <idle>
0:140:R + [000] 11:115:S events/0
0:140:R ==> [000] 11:115:R events/0
11:115:S ==> [000] 0:140:R <idle>
A tracer can disable it at runtime by clearing the bit
TRACE_ITER_CONTEXT_INFO in trace_flags.
The print routines were renamed to trace_print_context and
trace_print_lat_context, so that they can be used by tracers if they
want to use them for one of the trace_event callbacks.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: New way of using the blktrace infrastructure
This drops the requirement of userspace utilities to use the blktrace
facility.
Configuration is done thru sysfs, adding a "trace" directory to the
partition directory where blktrace can be enabled for the associated
request_queue.
The same filters present in the IOCTL interface are present as sysfs
device attributes.
The /sys/block/sdX/sdXN/trace/enable file allows tracing without any
filters.
The other files in this directory: pid, act_mask, start_lba and end_lba
can be used with the same meaning as with the IOCTL interface.
Using the sysfs interface will only setup the request_queue->blk_trace
fields, tracing will only take place when the "blk" tracer is selected
via the ftrace interface, as in the following example:
To see the trace, one can use the /d/tracing/trace file or the
/d/tracign/trace_pipe file, with semantics defined in the ftrace
documentation in Documentation/ftrace.txt.
[root@f10-1 ~]# cat /t/trace
kjournald-305 [000] 3046.491224: 8,1 A WBS 6367 + 8 <- (8,1) 6304
kjournald-305 [000] 3046.491227: 8,1 Q R 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491236: 8,1 G RB 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491239: 8,1 P NS [kjournald]
kjournald-305 [000] 3046.491242: 8,1 I RBS 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491251: 8,1 D WB 6367 + 8 [kjournald]
kjournald-305 [000] 3046.491610: 8,1 U WS [kjournald] 1
<idle>-0 [000] 3046.511914: 8,1 C RS 6367 + 8 [6367]
[root@f10-1 ~]#
The default line context (prefix) format is the one described in the ftrace
documentation, with the blktrace specific bits using its existing format,
described in blkparse(8).
If one wants to have the classic blktrace formatting, this is possible by
using:
[root@f10-1 ~]# echo blk_classic > /t/trace_options
[root@f10-1 ~]# cat /t/trace
8,1 0 3046.491224 305 A WBS 6367 + 8 <- (8,1) 6304
8,1 0 3046.491227 305 Q R 6367 + 8 [kjournald]
8,1 0 3046.491236 305 G RB 6367 + 8 [kjournald]
8,1 0 3046.491239 305 P NS [kjournald]
8,1 0 3046.491242 305 I RBS 6367 + 8 [kjournald]
8,1 0 3046.491251 305 D WB 6367 + 8 [kjournald]
8,1 0 3046.491610 305 U WS [kjournald] 1
8,1 0 3046.511914 0 C RS 6367 + 8 [6367]
[root@f10-1 ~]#
Using the ftrace standard format allows more flexibility, such
as the ability of asking for backtraces via trace_options:
[root@f10-1 ~]# echo noblk_classic > /t/trace_options
[root@f10-1 ~]# echo stacktrace > /t/trace_options
[root@f10-1 ~]# cat /t/trace
kjournald-305 [000] 3318.826779: 8,1 A WBS 6375 + 8 <- (8,1) 6312
kjournald-305 [000] 3318.826782:
<= submit_bio
<= submit_bh
<= sync_dirty_buffer
<= journal_commit_transaction
<= kjournald
<= kthread
<= child_rip
kjournald-305 [000] 3318.826836: 8,1 Q R 6375 + 8 [kjournald]
kjournald-305 [000] 3318.826837:
<= generic_make_request
<= submit_bio
<= submit_bh
<= sync_dirty_buffer
<= journal_commit_transaction
<= kjournald
<= kthread
Please read the ftrace documentation to use aditional, standardized
tracing filters such as /d/tracing/trace_cpumask, etc.
See also /d/tracing/trace_mark to add comments in the trace stream,
that is equivalent to the /d/block/sdaN/msg interface.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Dump the branch trace on an oops (based on ftrace_dump_on_oops).
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
After reorganizing the functions in trace.c and trace_function.c,
they no longer need to be in global context. This patch makes the
functions and one variable into static.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new feature to stack trace any function
Chris Mason asked about being able to pick and choose a function
and get a stack trace from it. This feature enables his request.
# echo io_schedule > /debug/tracing/set_ftrace_filter
# echo function > /debug/tracing/current_tracer
# echo func_stack_trace > /debug/tracing/trace_options
Produces the following in /debug/tracing/trace:
kjournald-702 [001] 135.673060: io_schedule <-sync_buffer
kjournald-702 [002] 135.673671:
<= sync_buffer
<= __wait_on_bit
<= out_of_line_wait_on_bit
<= __wait_on_buffer
<= sync_dirty_buffer
<= journal_commit_transaction
<= kjournald
Note, be careful about turning this on without filtering the functions.
You may find that you have a 10 second lag between typing and seeing
what you typed. This is why the stack trace for the function tracer
does not use the same stack_trace flag as the other tracers use.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: tracing's Api change
Currently, the stat tracing depends on the events tracing.
When you switch to a new tracer, the stats files of the previous tracer
will disappear. But it's more scalable to separate those two engines.
This way, we can keep the stat files of one or several tracers when we
want, without bothering of multiple tracer stat files or tracer switching.
To build/destroys its stats files, a tracer just have to call
register_stat_tracer/unregister_stat_tracer everytimes it wants to.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new API for tracers
Make the stat tracing API reentrant. And also provide the new directory
/debugfs/tracing/trace_stat which will contain all the stat files for the
current active tracer.
Now a tracer will, if desired, want to provide a zero terminated array of
tracer_stat structures.
Each one contains the callbacks necessary for one stat file.
It have to provide at least a name for its stat file, an iterator with
stat_start/start_next callback and an output callback for one stat entry.
Also adapt the branch tracer to this new API.
We create two files "all" and "annotated" inside the /debugfs/tracing/trace_stat
directory, making the both stats simultaneously available instead of needing
to change an option to switch from one stat file to another.
The output of these stats haven't changed.
Changes in v2:
_ Apply the previous memory leak fix (rebase against tip/master)
Changes in v3:
_ Merge the patch that adapted the branch tracer to this Api in this patch to
not break the kernel build.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Reduce future memory usage, use new cpumask API.
Since the last patch was created and acked, more old cpumask users
slipped into kernel/trace.
Mostly trivial conversions, except struct trace_iterator's "started"
member becomes a cpumask_var_t.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Impact: new tracer plugin
This patch adapts kmemtrace raw events tracing to the unified tracing API.
To enable and use this tracer, just do the following:
echo kmemtrace > /debugfs/tracing/current_tracer
cat /debugfs/tracing/trace
You will have the following output:
# tracer: kmemtrace
#
#
# ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER
# FREE | | | | | | | |
# |
type_id 1 call_site 18446744071565527833 ptr 18446612134395152256
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
That was to stay backward compatible with the format output produced in
inux/tracepoint.h.
This is the default ouput, but note that I tried something else.
If you change an option:
echo kmem_minimalistic > /debugfs/trace_options
and then cat /debugfs/trace, you will have the following output:
# tracer: kmemtrace
#
#
# ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER
# FREE | | | | | | | |
# |
- C 0xffff88007c088780 file_free_rcu
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc
+ K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
- C 0xffff88007cad6000 putname
+ K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode
+ K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info
+ K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc
+ K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp
+ K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp
Yeah I shall confess kmem_minimalistic should be: kmem_alternative.
Whatever, I find it more readable but this a personal opinion of course.
We can drop it if you want.
On the ALLOC/FREE column, + means an allocation and - a free.
On the type column, you have K = kmalloc, C = cache, P = page
I would like the flags to be GFP_* strings but that would not be easy to not
break the column with strings....
About the node...it seems to always be -1. I don't know why but that shouldn't
be difficult to find.
I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would
be more easy to find the tracer headers if they are all in their common
directory.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix
On !CONFIG_CONTEXT_SWITCH_TRACER trace_find_cmdline() is not defined:
kernel/trace/trace_output.c: In function 'trace_ctxwake_print':
kernel/trace/trace_output.c:499: error: implicit declaration of function 'trace_find_cmdline'
kernel/trace/trace_output.c:499: warning: assignment makes pointer from integer without a cast
Move it to the generic section in trace.h.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend the tracing API
The goal of this patch is to normalize and make more easy the
implementation of statistical (histogram) tracing.
It implements a trace_stat file into the /debugfs/tracing directory where
one can print a one-shot output of statistics/histogram entries.
A tracer has to provide two basic iterator callbacks:
stat_start() => the first entry
stat_next(prev, idx) => the next one.
Note that it is adapted for arrays or hash tables or lists.... since it
provides a pointer to the previous entry and the current index of the
iterator.
These two callbacks are called to get a snapshot of the statistics at each
opening of the trace_stat file because. The values are so updated between
two "cat trace_stat". And the tracer is free to lock its datas during the
iteration to keep consistent values.
Since it is almost always interesting to sort statisticals values to
address the problems by priority, this infrastructure provides a "sorting"
of the stat entries too if desired. A tracer has just to provide a
stat_cmp callback to compare two entries and the stat tracing
infrastructure will build a sorted list of the given entries.
A last callback, called stat_headers, can be implemented by a tracer to
output headers on its trace.
If one of these callbacks is changed on runtime, it just have to signal it
to the stat tracing API by calling the init_tracer_stat() helper.
Changes in V2:
- Fix a memory leak if the user opens multiple times the trace_stat file
without closing it. Now we always free our list before rebuilding it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: simplify/generalize/refactor trace.c
The trace.c file is becoming more difficult to maintain due to the
growing number of events. There is several formats that an event may
be printed. This patch sets up the infrastructure of an event hash to
allow for events to register how they should be printed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, remove obsolete code
Now that the ring buffer used by ftrace allows for variable length
entries, we do not need the 'cont' feature of the buffer. This code
makes other parts of ftrace more complex and by removing this it
simplifies the ftrace code.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch factors out common code from multiple tracers into a
tracing_reset_online_cpus() function and converts the tracers to use it.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: display ftrace_printk messages "as is"
By default, ftrace_printk() messages find their output with some other
informations like pid, caller, ...
Sometimes a developer just want to have the ftrace_printk left "as is", without
other information.
This is done by providing a default-off option called printk-msg-only.
To enable it, just do `echo printk-msg-only > /debugfs/tracing/trace_options`
Before the patch:
<...>-2739 [000] 145.692153: __might_sleep: I'm an ftrace_printk msg in __might_sleep
<...>-2739 [000] 145.692155: __might_sleep: I'm another ftrace_printk msg in __might_sleep
After the patch and the printk-msg-only option enabled:
I'm an ftrace_printk msg in __might_sleep
I'm another ftrace_printk msg in __might_sleep
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: restructure code, cleanup
Remove BTS bits from the hw-branch-tracer (renamed from bts-tracer) and
use the ds interface.
Signed-off-by: Markus Metzger <markut.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix default empty traces on function-graph-tracer
The actual ftrace_trace_task() checks if ftrace_pid_trace is allocated
and return 1 if it is true.
If it is NULL, it will check the bit of pid tracing flag for the current
task (which are not set by default).
So by default, a task is not traced.
Actually all tasks should be traced by default and filter_by_pid when
ftrace_pid_trace is allocated.
The appropriate condition should be to return 1 if filter_by_pid is
set.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acke-dby: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Handle the TRACE_PRINT entries from the function grapg tracer
and output them as a C comment just below the function that called
it, as if it was a comment inside this function.
Example with an ftrace_printk inside might_sleep() function:
void __might_sleep(char *file, int line)
{
static unsigned long prev_jiffy; /* ratelimiting */
ftrace_printk("Hi I'm a comment in might_sleep() :-)");
A chunk of a resulting trace:
0) | _reiserfs_free_block() {
0) | reiserfs_read_bitmap_block() {
0) | __bread() {
0) | __getblk() {
0) | __find_get_block() {
0) 0.698 us | mark_page_accessed();
0) 2.267 us | }
0) | __might_sleep() {
0) | /* Hi I'm a comment in might_sleep() :-) */
0) 1.321 us | }
0) 5.872 us | }
0) 7.313 us | }
0) 8.718 us | }
And this patch brings two minor fixes:
- The newline after a switch-out task has disappeared
- The "|" sign just before the cpu number on task-switch has been deleted.
0) 0.616 us | pick_next_task_rt();
0) 1.457 us | _spin_trylock();
0) 0.653 us | _spin_unlock();
0) 0.728 us | _spin_trylock();
0) 0.631 us | _spin_unlock();
0) 0.729 us | native_load_sp0();
0) 0.593 us | native_load_tls();
------------------------------------------
0) cat-2834 => migrati-3
------------------------------------------
0) | finish_task_switch() {
0) 0.841 us | _spin_unlock_irq();
0) 0.616 us | post_schedule_rt();
0) 3.882 us | }
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up, extend PID filtering to PID namespaces
Eric Biederman suggested using the struct pid for filtering on
pids in the kernel. This patch is based off of a demonstration
of an implementation that Eric sent me in an email.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: New feature
This patch makes the changes to set_ftrace_pid apply to the function
graph tracer.
# echo $$ > /debugfs/tracing/set_ftrace_pid
# echo function_graph > /debugfs/tracing/current_tracer
Will cause only the current task to be traced. Note, the trace flags are
also inherited by child processes, so the children of the shell
will also be traced.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the file:
/debugfs/tracing/set_graph_function
which can be used along with the function graph tracer.
When this file is empty, the function graph tracer will act as
usual. When the file has a function in it, the function graph
tracer will only trace that function.
For example:
# echo blk_unplug > /debugfs/tracing/set_graph_function
# cat /debugfs/tracing/trace
[...]
------------------------------------------
| 2) make-19003 => kjournald-2219
------------------------------------------
2) | blk_unplug() {
2) | dm_unplug_all() {
2) | dm_get_table() {
2) 1.381 us | _read_lock();
2) 0.911 us | dm_table_get();
2) 1. 76 us | _read_unlock();
2) + 12.912 us | }
2) | dm_table_unplug_all() {
2) | blk_unplug() {
2) 0.778 us | generic_unplug_device();
2) 2.409 us | }
2) 5.992 us | }
2) 0.813 us | dm_table_put();
2) + 29. 90 us | }
2) + 34.532 us | }
You can add up to 32 functions into this file. Currently we limit it
to 32, but this may change with later improvements.
To add another function, use the append '>>':
# echo sys_read >> /debugfs/tracing/set_graph_function
# cat /debugfs/tracing/set_graph_function
blk_unplug
sys_read
Using the '>' will clear out the function and write anew:
# echo sys_write > /debug/tracing/set_graph_function
# cat /debug/tracing/set_graph_function
sys_write
Note, if you have function graph running while doing this, the small
time between clearing it and updating it will cause the graph to
record all functions. This should not be an issue because after
it sets the filter, only those functions will be recorded from then on.
If you need to only record a particular function then set this
file first before starting the function graph tracer. In the future
this side effect may be corrected.
The set_graph_function file is similar to the set_ftrace_filter but
it does not take wild cards nor does it allow for more than one
function to be set with a single write. There is no technical reason why
this is the case, I just do not have the time yet to implement that.
Note, dynamic ftrace must be enabled for this to appear because it
uses the dynamic ftrace records to match the name to the mcount
call sites.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature, let entry function decide to trace or not
This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new "power-tracer" ftrace plugin
This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.
An example way of using this is:
mount -t debugfs none /sys/kernel/debug
echo cstate > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_enabled
sleep 1
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enhancement to function graph tracer
Export the trace_find_cmdline so the function graph tracer can
use it to print the comms of the threads.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: feature
This patch sets a C-like output for the function graph tracing.
For this aim, we now call two handler for each function: one on the entry
and one other on return. This way we can draw a well-ordered call stack.
The pid of the previous trace is loosely stored to be compared against
the one of the current trace to see if there were a context switch.
Without this little feature, the call tree would seem broken at
some locations.
We could use the sched_tracer to capture these sched_events but this
way of processing is much more simpler.
2 spaces have been chosen for indentation to fit the screen while deep
calls. The time of execution in nanosecs is printed just after closed
braces, it seems more easy this way to find the corresponding function.
If the time was printed as a first column, it would be not so easy to
find the corresponding function if it is called on a deep depth.
I plan to output the return value but on 32 bits CPU, the return value
can be 32 or 64, and its difficult to guess on which case we are.
I don't know what would be the better solution on X86-32: only print
eax (low-part) or even edx (high-part).
Actually it's thee same problem when a function return a 8 bits value, the
high part of eax could contain junk values...
Here is an example of trace:
sys_read() {
fget_light() {
} 526
vfs_read() {
rw_verify_area() {
security_file_permission() {
cap_file_permission() {
} 519
} 1564
} 2640
do_sync_read() {
pipe_read() {
__might_sleep() {
} 511
pipe_wait() {
prepare_to_wait() {
} 760
deactivate_task() {
dequeue_task() {
dequeue_task_fair() {
dequeue_entity() {
update_curr() {
update_min_vruntime() {
} 504
} 1587
clear_buddies() {
} 512
add_cfs_task_weight() {
} 519
update_min_vruntime() {
} 511
} 5602
dequeue_entity() {
update_curr() {
update_min_vruntime() {
} 496
} 1631
clear_buddies() {
} 496
update_min_vruntime() {
} 527
} 4580
hrtick_update() {
hrtick_start_fair() {
} 488
} 1489
} 13700
} 14949
} 16016
msecs_to_jiffies() {
} 496
put_prev_task_fair() {
} 504
pick_next_task_fair() {
} 489
pick_next_task_rt() {
} 496
pick_next_task_fair() {
} 489
pick_next_task_idle() {
} 489
------------8<---------- thread 4 ------------8<----------
finish_task_switch() {
} 1203
do_softirq() {
__do_softirq() {
__local_bh_disable() {
} 669
rcu_process_callbacks() {
__rcu_process_callbacks() {
cpu_quiet() {
rcu_start_batch() {
} 503
} 1647
} 3128
__rcu_process_callbacks() {
} 542
} 5362
_local_bh_enable() {
} 587
} 8880
} 9986
kthread_should_stop() {
} 669
deactivate_task() {
dequeue_task() {
dequeue_task_fair() {
dequeue_entity() {
update_curr() {
calc_delta_mine() {
} 511
update_min_vruntime() {
} 511
} 2813
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new ftrace plugin
A prototype for a BTS ftrace plug-in.
The tracer collects branch trace in a cyclic buffer for each cpu.
The tracer is not configurable and the trace for each snapshot is
appended when doing cat /debug/tracing/trace.
This is a proof of concept that will be extended with future patches
to become a (hopefully) useful tool.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a callback to allow an ftrace plug-in to write its own header.
Move the call to trace->open() up a few lines.
The changes are required by the BTS ftrace plug-in.
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: modify+improve the userstacktrace tracing visualization feature
Store thread group leader id, and use it to lookup the address in the
process's map. We could have looked up the address on thread's map,
but the thread might not exist by the time we are called. The process
might not exist either, but if you are reading trace_pipe, that is
unlikely.
Example usage:
mount -t debugfs nodev /sys/kernel/debug
cd /sys/kernel/debug/tracing
echo userstacktrace >iter_ctrl
echo sym-userobj >iter_ctrl
echo sched_switch >current_tracer
echo 1 >tracing_enabled
cat trace_pipe >/tmp/trace&
.... run application ...
echo 0 >tracing_enabled
cat /tmp/trace
You'll see stack entries like:
/lib/libpthread-2.7.so[+0xd370]
You can convert them to function/line using:
addr2line -fie /lib/libpthread-2.7.so 0xd370
Or:
addr2line -fie /usr/lib/debug/libpthread-2.7.so 0xd370
For non-PIC/PIE executables this won't work:
a.out[+0x73b]
You need to run the following: addr2line -fie a.out 0x40073b
(where 0x400000 is the default load address of a.out)
Signed-off-by: Török Edwin <edwintorok@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new (default-off) tracing visualization feature
Usage example:
mount -t debugfs nodev /sys/kernel/debug
cd /sys/kernel/debug/tracing
echo userstacktrace >iter_ctrl
echo sched_switch >current_tracer
echo 1 >tracing_enabled
.... run application ...
echo 0 >tracing_enabled
Then read one of 'trace','latency_trace','trace_pipe'.
To get the best output you can compile your userspace programs with
frame pointers (at least glibc + the app you are tracing).
Signed-off-by: Török Edwin <edwintorok@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: help to find the better depth of trace
We decided to arbitrary define the depth of function return trace as
"20". Perhaps this is not enough. To help finding an optimal depth, we
measure now the overrun: the number of functions that have been missed
for the current thread. By default this is not displayed, we have to
do set a particular flag on the return tracer: echo overrun >
/debug/tracing/trace_options And the overrun will be printed on the
right.
As the trace shows below, the current 20 depth is not enough.
update_wall_time+0x37f/0x8c0 -> update_xtime_cache (345 ns) (Overruns: 2838)
update_wall_time+0x384/0x8c0 -> clocksource_get_next (1141 ns) (Overruns: 2838)
do_timer+0x23/0x100 -> update_wall_time (3882 ns) (Overruns: 2838)
tick_do_update_jiffies64+0xbf/0x160 -> do_timer (5339 ns) (Overruns: 2838)
tick_sched_timer+0x6a/0xf0 -> tick_do_update_jiffies64 (7209 ns) (Overruns: 2838)
vgacon_set_cursor_size+0x98/0x120 -> native_io_delay (2613 ns) (Overruns: 274)
vgacon_cursor+0x16e/0x1d0 -> vgacon_set_cursor_size (33151 ns) (Overruns: 274)
set_cursor+0x5f/0x80 -> vgacon_cursor (36432 ns) (Overruns: 274)
con_flush_chars+0x34/0x40 -> set_cursor (38790 ns) (Overruns: 274)
release_console_sem+0x1ec/0x230 -> up (721 ns) (Overruns: 274)
release_console_sem+0x225/0x230 -> wake_up_klogd (316 ns) (Overruns: 274)
con_flush_chars+0x39/0x40 -> release_console_sem (2996 ns) (Overruns: 274)
con_write+0x22/0x30 -> con_flush_chars (46067 ns) (Overruns: 274)
n_tty_write+0x1cc/0x360 -> con_write (292670 ns) (Overruns: 274)
smp_apic_timer_interrupt+0x2a/0x90 -> native_apic_mem_write (330 ns) (Overruns: 274)
irq_enter+0x17/0x70 -> idle_cpu (413 ns) (Overruns: 274)
smp_apic_timer_interrupt+0x2f/0x90 -> irq_enter (1525 ns) (Overruns: 274)
ktime_get_ts+0x40/0x70 -> getnstimeofday (465 ns) (Overruns: 274)
ktime_get_ts+0x60/0x70 -> set_normalized_timespec (436 ns) (Overruns: 274)
ktime_get+0x16/0x30 -> ktime_get_ts (2501 ns) (Overruns: 274)
hrtimer_interrupt+0x77/0x1a0 -> ktime_get (3439 ns) (Overruns: 274)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: give a way to send specific messages to tracers
The current implementation of tracing uses some flags to control the
output of general tracers. But we have no way to implement custom
flags handling for a specific tracer. This patch proposes a new
callback for the struct tracer which called set_flag and a structure
that represents a 32 bits variable flag.
A tracer can implement a struct tracer_flags on which it puts the
initial value of the flag integer. Than it can place a range of flags
with their name and their flag mask on the flag integer. The structure
that implement a single flag is called struct tracer_opt.
These custom flags will be available through the trace_options file
like the general tracing flags. Changing their value is done like the
other general flags. For example if you have a flag that calls "foo",
you can activate it by writing "foo" or "nofoo" on trace_options.
Note that the set_flag callback is optional and is only needed if you
want the flags changing to be signaled to your tracer and let it to
accept or refuse their assignment.
V2: Some arrangements in coding style....
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix trace_options behavior
writing to trace/trace_options use the index of the array
to find the value of the flag. With branch tracer flag
defined conditionally, this breaks writing to trace_options
with branch tracer disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend the ->init() method with the ability to fail
This bring a way to know if the initialization of a tracer successed.
A tracer must return 0 on success and a traditional error (ie:
-ENOMEM) if it fails.
If a tracer fails to init, it is free to print a detailed warn. The
tracing api will not and switch to a new tracer will just return the
error from the init callback.
Note: this will be used for the return tracer.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: better handling of CPU buffer start annotation
Because of the confusion with the per CPU buffers wrapping where
one CPU might be more active at the end of the trace than the other
CPUs causing that one CPU to have a shorter history. Kernel
developers were confused by the "missing" data of that one CPU
at the beginning of the trace output. An annotation was added to
the trace output to show that the buffer had started:
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
##### CPU 3 buffer started ####
<idle>-0 [003] 158.192959: smp_apic_timer_interrupt
[...]
<idle>-0 [003] 161.556520: default_idle
##### CPU 1 buffer started ####
<idle>-0 [001] 161.592494: hrtimer_force_reprogram
[etc]
But this annotation gets a bit messy when tracers do not fill the
buffers. This patch does a couple of things:
One) it adds a flag to trace_options to disable these annotations
Two) it does not annotate if the tracer did not overflow its buffer.
This makes the output much cleaner.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: added new branch tracer
Currently the tracing of branch profiling (unlikelys and likelys hit)
is only activated by the iter_ctrl. This patch adds a tracer called
"branch" that will just trace the branch profiling. The advantage
of adding this tracer is that it can be added to the ftrace selftests
on startup.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: rename of iter_ctrl unlikely to branch
The unlikely name is ugly. This patch converts the iter_ctrl command
"unlikely" and "nounlikely" to "branch" and "nobranch" respectively.
It also renames a lot of internal functions to use "branch" instead
of "unlikely".
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: name change of unlikely tracer and profiler
Ingo Molnar suggested changing the config from UNLIKELY_PROFILE
to BRANCH_PROFILING. I never did like the "unlikely" name so I
went one step farther, and renamed all the unlikely configurations
to a "BRANCH" variant.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: new likely/unlikely branch tracer
This patch adds a way to record the instances of the likely() and unlikely()
branch condition annotations.
When "unlikely" is set in /debugfs/tracing/iter_ctrl the unlikely conditions
will be added to any of the ftrace tracers. The change takes effect when
a new tracer is passed into the current_tracer file.
For example:
bash-3471 [003] 357.014755: [INCORRECT] sched_info_dequeued:sched_stats.h:177
bash-3471 [003] 357.014756: [correct] update_curr:sched_fair.c:489
bash-3471 [003] 357.014758: [correct] calc_delta_fair:sched_fair.c:411
bash-3471 [003] 357.014759: [correct] account_group_exec_runtime:sched_stats.h:356
bash-3471 [003] 357.014761: [correct] update_curr:sched_fair.c:489
bash-3471 [003] 357.014763: [INCORRECT] calc_delta_fair:sched_fair.c:411
bash-3471 [003] 357.014765: [correct] calc_delta_mine:sched.c:1279
Which shows the normal tracer heading, as well as whether the condition was
correct "[correct]" or was mistaken "[INCORRECT]", followed by the function,
file name and line number.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Cleanups on the boot tracer and ftrace
This patch bring some cleanups about the boot tracer headers. The
functions and structures of this tracer have nothing related to ftrace
and should have so their own header file.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new tracing plugin which can trace full (entry+exit) function calls
This tracer uses the low level function return ftrace plugin to
measure the execution time of the kernel functions.
The first field is the caller of the function, the second is the
measured function, and the last one is the execution time in
nanoseconds.
- v3:
- HAVE_FUNCTION_RET_TRACER have been added. Each arch that support ftrace return
should enable it.
- ftrace_return_stub becomes ftrace_stub.
- CONFIG_FUNCTION_RET_TRACER depends now on CONFIG_FUNCTION_TRACER
- Return traces printing can be used for other tracers on trace.c
- Adapt to the new tracing API (no more ctrl_update callback)
- Correct the check of "disabled" during insertion.
- Minor changes...
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change in trace output
Because the trace buffers are per cpu ring buffers, the start of
the trace can be confusing. If one CPU is very active at the
end of the trace, its history will not go as far back as the
other CPU traces. This means that output for a particular CPU
may not appear for the first part of a trace.
To help annotate what is happening, and to prevent any more
confusion, this patch adds a line that annotates the start of
a CPU buffer output.
For example:
automount-3495 [001] 184.596443: dnotify_parent <-vfs_write
[...]
automount-3495 [001] 184.596449: dput <-path_put
automount-3496 [002] 184.596450: down_read_trylock <-do_page_fault
[...]
sshd-3497 [001] 184.597069: up_read <-do_page_fault
<idle>-0 [000] 184.597074: __exit_idle <-exit_idle
[...]
automount-3496 [002] 184.597257: filemap_fault <-__do_fault
<idle>-0 [003] 184.597261: exit_idle <-smp_apic_timer_interrupt
Note, parsers of a trace output should always ignore any lines that
start with a '#'.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove obsolete variable in trace_array structure
With the new start / stop method of ftrace, the ctrl variable
in the trace_array structure is now obsolete. Remove it.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: Remove the ctrl_update tracer method
With the new quick start/stop method of tracing, the ctrl_update
method is out of date.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix for sched_switch that broke dynamic ftrace startup
The commit: tracing/fastboot: use sched switch tracer from boot tracer
broke the API of the sched_switch trace. The use of the
tracing_start/stop_cmdline record is for only recording the cmdline,
NOT recording the schedule switches themselves.
Seeing that the boot tracer broke the API to do something that it
wanted, this patch adds a new interface for the API while
puting back the original interface of the old API.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: boot tracer startup modified
The boot tracer calls into some of the schedule tracing private functions
that should not be exported. This patch cleans it up, and makes
way for further changes in the ftrace infrastructure.
This patch adds a api to assign a tracer array to the schedule
context switch tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: change where tracing is started up and stopped
Currently, when a new tracer is selected via echo'ing a tracer name into
the current_tracer file, the startup is only done if tracing_enabled is
set to one. If tracing_enabled is changed to zero (by echo'ing 0 into
the tracing_enabled file) a full shutdown is performed.
The full startup and shutdown of a tracer can be expensive and the
user can lose out traces when echo'ing in 0 to the tracing_enabled file,
because the process takes too long. There can also be places that
the user would like to start and stop the tracer several times and
doing the full startup and shutdown of a tracer might be too expensive.
This patch performs the full startup and shutdown when a tracer is
selected. It also adds a way to do a quick start or stop of a tracer.
The quick version is just a flag that prevents the tracing from
taking place, but the overhead of the code is still there.
For example, the startup of a tracer may enable tracepoints, or enable
the function tracer. The stop and start will just set a flag to
have the tracer ignore the calls when the tracepoint or function trace
is called. The overhead of the tracer may still be present when
the tracer is stopped, but no tracing will occur. Setting the tracer
to the 'nop' tracer (or any other tracer) will perform the shutdown
of the tracer which will disable the tracepoint or disable the
function tracer.
The tracing_enabled file will simply start or stop tracing.
This change is all internal. The end result for the user should be the same
as before. If tracing_enabled is not set, no trace will happen.
If tracing_enabled is set, then the trace will happen. The tracing_enabled
variable is static between tracers. Enabling tracing_enabled and
going to another tracer will keep tracing_enabled enabled. Same
is true with disabling tracing_enabled.
This patch will now provide a fast start/stop method to the users
for enabling or disabling tracing.
Note: There were two methods to the struct tracer that were never
used: The methods start and stop. These were to be used as a hook
to the reading of the trace output, but ended up not being
necessary. These two methods are now used to enable the start
and stop of each tracer, in case the tracer needs to do more than
just not write into the buffer. For example, the irqsoff tracer
must stop recording max latencies when tracing is stopped.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: enhance boot trace output with scheduling events
Use the sched_switch tracer from the boot tracer.
We also can trace schedule events inside the initcalls.
Sched tracing is disabled after the initcall has finished and
then reenabled before the next one is started.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: disable interrupts during trace entry creation (as opposed to preempt)
To help with performance, I set the ftracer to not disable interrupts,
and only to disable preemption. If an interrupt occurred, it would not
be traced, because the function tracer protects itself from recursion.
This may be faster, but the trace output might miss some traces.
This patch makes the fuction trace disable interrupts, but it also
adds a runtime feature to disable preemption instead. It does this by
having two different tracer functions. When the function tracer is
enabled, it will check to see which version is requested (irqs disabled
or preemption disabled). Then it will use the corresponding function
as the tracer.
Irq disabling is the default behaviour, but if the user wants better
performance, with the chance of missing traces, then they can choose
the preempt disabled version.
Running hackbench 3 times with the irqs disabled and 3 times with
the preempt disabled function tracer yielded:
tracing type times entries recorded
------------ -------- ----------------
irq disabled 43.393 166433066
43.282 166172618
43.298 166256704
preempt disabled 38.969 159871710
38.943 159972935
39.325 161056510
Average:
irqs disabled: 43.324 166287462
preempt disabled: 39.079 160300385
preempt is 10.8 percent faster than irqs disabled.
I wrote a patch to count function trace recursion and reran hackbench.
With irq disabled: 1,150 times the function tracer did not trace due to
recursion.
with preempt disabled: 5,117,718 times.
The thousand times with irq disabled could be due to NMIs, or simply a case
where it called a function that was not protected by notrace.
But we also see that a large amount of the trace is lost with the
preempt version.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new ftrace-plugin internal APIs
Parts of the tracer needs to be careful about schedule recursion.
If the NEED_RESCHED flag is set, a preempt_enable will call schedule.
Inside the schedule function, the NEED_RESCHED flag is cleared.
The problem arises when a trace happens in the schedule function but before
NEED_RESCHED is cleared. The race is as follows:
schedule()
>> tracer called
trace_function()
preempt_disable()
[ record trace ]
preempt_enable() <<- here's the issue.
[check NEED_RESCHED]
schedule()
[ Repeat the above, over and over again ]
The naive approach is simply to use preempt_enable_no_schedule instead.
The problem with that approach is that, although we solve the schedule
recursion issue, we now might lose a preemption check when not in the
schedule function.
trace_function()
preempt_disable()
[ record trace ]
[Interrupt comes in and sets NEED_RESCHED]
preempt_enable_no_resched()
[continue without scheduling]
The way ftrace handles this problem is with the following approach:
int resched;
resched = need_resched();
preempt_disable_notrace();
[record trace]
if (resched)
preempt_enable_no_sched_notrace();
else
preempt_enable_notrace();
This may seem like the opposite of what we want. If resched is set
then we call the "no_sched" version?? The reason we do this is because
if NEED_RESCHED is set before we disable preemption, there's two reasons
for that:
1) we are in an atomic code path
2) we are already on our way to the schedule function, and maybe even
in the schedule function, but have yet to clear the flag.
Both the above cases we do not want to schedule.
This solution has already been implemented within the ftrace infrastructure.
But the problem is that it has been implemented several times. This patch
encapsulates this code to two nice functions.
resched = ftrace_preempt_disable();
[ record trace]
ftrace_preempt_enable(resched);
This way the tracers do not need to worry about getting it right.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: build fix on non-lockdep architectures
Some architectures do not support a way to read the irq flags that
is set from "local_irq_save(flags)" to determine if interrupts were
disabled or enabled. Ftrace uses this information to display to the user
if the trace occurred with interrupts enabled or disabled.
Besides the fact that those archs that do not support this will fail to
compile, unless they fix it, we do not want to have the trace simply
say interrupts were not disabled or they were enabled, without knowing
the real answer.
This patch adds a 'X' in the output to let the user know that the
architecture they are running on does not support a way for the tracer
to determine if interrupts were enabled or disabled. It also lets those
same archs compile with tracing enabled.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER. The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.
This patch was generated mostly by script, and partially by hand.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With the new ring buffer infrastructure in ftrace, I'm trying to make
ftrace a little more light weight.
This patch converts a lot of the local_irq_save/restore into
preempt_disable/enable. The original preempt count in a lot of cases
has to be sent in as a parameter so that it can be recorded correctly.
Some places were recording it incorrectly before anyway.
This is also laying the ground work to make ftrace a little bit
more reentrant, and remove all locking. The function tracers must
still protect from reentrancy.
Note: All the function tracers must be careful when using preempt_disable.
It must do the following:
resched = need_resched();
preempt_disable_notrace();
[...]
if (resched)
preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
The reason is that if this function traces schedule() itself, the
preempt_enable_notrace() will cause a schedule, which will lead
us into a recursive failure.
If we needed to reschedule before calling preempt_disable, we
should have already scheduled. Since we did not, this is most
likely that we should not and are probably inside a schedule
function.
If resched was not set, we still need to catch the need resched
flag being set when preemption was off and the if case at the
end will catch that for us.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mmiotrace map had a bug that would typecast the entry from
the trace to the wrong type. That is a known danger of C typecasts,
there's absolutely zero checking done on them.
Help that problem a bit by using a GCC extension to implement a
type filter that restricts the types that a trace record can be
cast into, and by adding a dynamic check (in debug mode) to verify
the type of the entry.
This patch adds a macro to assign all entries of ftrace using the type
of the variable and checking the entry id. The typecasts are now done
in the macro for only those types that it knows about, which should
be all the types that are allowed to be read from the tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need a kind of disambiguation when a print_line callback
returns 0.
_There is not enough space to print all the entry.
Please flush the seq and retry.
_I can't handle this type of entry
This patch changes the type of this callback for better information.
Also some changes have been made in this V2.
_ Only relay to default functions after the print_line callback fails.
_ This patch doesn't fix the issue with the broken pipe (see patch 2/4 for that)
Some things are still in discussion:
_ Find better names for the enum print_line_t values
_ Change the type of print_trace_line into boolean.
Patches to change that can be sent later.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the underlining ring buffer for ftrace now hold variable length
entries, we can take advantage of this by only storing the size of the
actual event into the buffer. This happens to increase the number of
entries in the buffer dramatically.
We can also get rid of the "trace_cont" operation, but I'm keeping that
until we have no more users. Some of the ftrace tracers can now change
their code to adapt to this new feature.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jiri Olsa