Commit Graph

42135 Commits

Author SHA1 Message Date
Linus Torvalds 6b15d6650c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi.

 2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized
    properly.  From Ezequiel Garcia.

 3) Missing spinlock init in mvneta driver, from Gregory CLEMENT.

 4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT.

 5) Fix deadlock on team->lock when propagating features, from Ivan
    Vecera.

 6) Work around buffer offset hw bug in alx chips, from Feng Tang.

 7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin
    Long.

 8) Various statistics bug fixes in mlx4 from Eric Dumazet.

 9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann.

10) All of l2tp was namespace aware, but the ipv6 support code was not
    doing so.  From Shmulik Ladkani.

11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck.

12) Propagate MAC changes properly through VLAN devices, from Mike
    Manning.

13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  sfc: Track RPS flow IDs per channel instead of per function
  usbnet: smsc95xx: fix link detection for disabled autonegotiation
  virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
  bnx2x: avoid leaking memory on bnx2x_init_one() failures
  fou: fix IPv6 Kconfig options
  openvswitch: update checksum in {push,pop}_mpls
  sctp: sctp_diag should dump sctp socket type
  net: fec: update dirty_tx even if no skb
  vlan: Propagate MAC address to VLANs
  atm: iphase: off by one in rx_pkt()
  atm: firestream: add more reserved strings
  vxlan: Accept user specified MTU value when create new vxlan link
  net: pktgen: Call destroy_hrtimer_on_stack()
  timer: Export destroy_hrtimer_on_stack()
  net: l2tp: Make l2tp_ip6 namespace aware
  Documentation: ip-sysctl.txt: clarify secure_redirects
  sfc: use flow dissector helpers for aRFS
  ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
  net: nps_enet: Disable interrupts before napi reschedule
  net/lapb: tuse %*ph to dump buffers
  ...
2016-05-31 22:28:28 -07:00
Arnd Bergmann 95e4daa820 fou: fix IPv6 Kconfig options
The Kconfig options I added to work around broken compilation ended
up screwing up things more, as I used the wrong symbol to control
compilation of the file, resulting in IPv6 fou support to never be built
into the kernel.

Changing CONFIG_NET_FOU_IPV6_TUNNELS to CONFIG_IPV6_FOU fixes that
problem, I had renamed the symbol in one location but not the other,
and as the file is never being used by other kernel code, this did not
lead to a build failure that I would have caught.

After that fix, another issue with the same patch becomes obvious, as we
'select INET6_TUNNEL', which is related to IPV6_TUNNEL, but not the same,
and this can still cause the original build failure when IPV6_TUNNEL is
not built-in but IPV6_FOU is. The fix is equally trivial, we just need
to select the right symbol.

I have successfully build 350 randconfig kernels with this patch
and verified that the driver is now being built.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Fixes: fabb13db44 ("fou: add Kconfig options for IPv6 support")
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31 14:07:49 -07:00
Simon Horman bc7cc5999f openvswitch: update checksum in {push,pop}_mpls
In the case of CHECKSUM_COMPLETE the skb checksum should be updated in
{push,pop}_mpls() as they the type in the ethernet header.

As suggested by Pravin Shelar.

Cc: Pravin Shelar <pshelar@nicira.com>
Fixes: 25cd9ba0ab ("openvswitch: Add basic MPLS support to kernel")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31 13:51:42 -07:00
Xin Long 40eb90e9cc sctp: sctp_diag should dump sctp socket type
Now we cannot distinguish that one sk is a udp or sctp style when
we use ss to dump sctp_info. it's necessary to dump it as well.

For sctp_diag, ss support is not officially available, thus there
are no official users of this yet, so we can add this field in the
middle of sctp_info without breaking user API.

v1->v2:
  - move 'sctpi_s_type' field to the end of struct sctp_info, so
    that it won't cause incompatibility with applications already
    built.
  - add __reserved3 in sctp_info to make sure sctp_info is 8-byte
    alignment.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31 11:59:06 -07:00
Mike Manning 308453aa91 vlan: Propagate MAC address to VLANs
The MAC address of the physical interface is only copied to the VLAN
when it is first created, resulting in an inconsistency after MAC
address changes of only newly created VLANs having an up-to-date MAC.

The VLANs should continue inheriting the MAC address of the physical
interface until the VLAN MAC address is explicitly set to any value.
This allows IPv6 EUI64 addresses for the VLAN to reflect any changes
to the MAC of the physical interface and thus for DAD to behave as
expected.

Signed-off-by: Mike Manning <mmanning@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31 11:56:48 -07:00
Guenter Roeck bcf91bdb44 net: pktgen: Call destroy_hrtimer_on_stack()
If CONFIG_DEBUG_OBJECTS_TIMERS=y, hrtimer_init_on_stack() requires
a matching call to destroy_hrtimer_on_stack() to clean up timer
debug objects.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31 11:44:08 -07:00
Shmulik Ladkani 0e6b525982 net: l2tp: Make l2tp_ip6 namespace aware
l2tp_ip6 tunnel and session lookups were still using init_net, although
the l2tp core infrastructure already supports lookups keyed by 'net'.

As a result, l2tp_ip6_recv discarded packets for tunnels/sessions
created in namespaces other than the init_net.

Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-30 00:03:53 -07:00
Baozeng Ding 421eeea10d ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
Fix a logic error to avoid potential null pointer dereference.

Signed-off-by: Baozeng Ding <sploving1@gmail.com>
Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29 22:36:25 -07:00
Andy Shevchenko 0d08df6c49 net/lapb: tuse %*ph to dump buffers
Use %*ph specifier to dump small buffers in hex format instead doing this
byte-by-byte.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29 22:33:25 -07:00
Arnd Bergmann fabb13db44 fou: add Kconfig options for IPv6 support
A previous patch added the fou6.ko module, but that failed to link
in a couple of configurations:

net/built-in.o: In function `ip6_tnl_encap_add_fou_ops':
net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops'
net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops'
net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops'
net/built-in.o: In function `ip6_tnl_encap_del_fou_ops':
net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops'
net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops'

If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops
are in a module, but fou6.c can still be built-in, and that
obviously fails to link.

Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or
CONFIG_IPV6_TUNNEL=n, the same problem happens for a different
reason.

This adds two new silent Kconfig symbols to work around both
problems:

- CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m
  or CONFIG_IPV6=m
- CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled
  and NET_FOU_IP_TUNNELS is also turned out, and it will ensure
  that CONFIG_IPV6_TUNNEL is also available.

The options could be made user-visible as well, to give additional
room for configuration, but it seems easier not to bother users
with more choice here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aa3463d65e ("fou: Add encap ops for IPv6 tunnels")
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29 22:24:21 -07:00
Arnd Bergmann 287980e49f remove lots of IS_ERR_VALUE abuses
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.

However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.

Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.

This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.

Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.

I was using this definition for testing:

 #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
       unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))

which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.

I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.

[ Updated the 9p parts as per Al Viro  - Linus ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 15:26:11 -07:00
Linus Torvalds a10c38a4f3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
 "This changeset has a few main parts:

   - Ilya has finished a huge refactoring effort to sync up the
     client-side logic in libceph with the user-space client code, which
     has evolved significantly over the last couple years, with lots of
     additional behaviors (e.g., how requests are handled when cluster
     is full and transitions from full to non-full).

     This structure of the code is more closely aligned with userspace
     now such that it will be much easier to maintain going forward when
     behavior changes take place.  There are some locking improvements
     bundled in as well.

   - Zheng adds multi-filesystem support (multiple namespaces within the
     same Ceph cluster)

   - Zheng has changed the readdir offsets and directory enumeration so
     that dentry offsets are hash-based and therefore stable across
     directory fragmentation events on the MDS.

   - Zheng has a smorgasbord of bug fixes across fs/ceph"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits)
  ceph: fix wake_up_session_cb()
  ceph: don't use truncate_pagecache() to invalidate read cache
  ceph: SetPageError() for writeback pages if writepages fails
  ceph: handle interrupted ceph_writepage()
  ceph: make ceph_update_writeable_page() uninterruptible
  libceph: make ceph_osdc_wait_request() uninterruptible
  ceph: handle -EAGAIN returned by ceph_update_writeable_page()
  ceph: make fault/page_mkwrite return VM_FAULT_OOM for -ENOMEM
  ceph: block non-fatal signals for fault/page_mkwrite
  ceph: make logical calculation functions return bool
  ceph: tolerate bad i_size for symlink inode
  ceph: improve fragtree change detection
  ceph: keep leaf frag when updating fragtree
  ceph: fix dir_auth check in ceph_fill_dirfrag()
  ceph: don't assume frag tree splits in mds reply are sorted
  ceph: fix inode reference leak
  ceph: using hash value to compose dentry offset
  ceph: don't forbid marking directory complete after forward seek
  ceph: record 'offset' for each entry of readdir result
  ceph: define 'end/complete' in readdir reply as bit flags
  ...
2016-05-26 14:10:32 -07:00
Linus Torvalds ea8ea737c4 NFS client updates for Linux 4.7
Highlights include:
 
 Features:
 - Add support for the NFS v4.2 COPY operation
 - Add support for NFS/RDMA over IPv6
 
 Bugfixes and cleanups:
 - Avoid race that crashes nfs_init_commit()
 - Fix oops in callback path
 - Fix LOCK/OPEN race when unlinking an open file
 - Choose correct stateids when using delegations in setattr, read and write
 - Don't send empty SETATTR after OPEN_CREATE
 - xprtrdma: Prevent server from writing a reply into memory client has released
 - xprtrdma: Support using Read list and Reply chunk in one RPC call
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXRu76AAoJENfLVL+wpUDrDVoQAKPKv1tEVJMRUQA3UVoKoixd
 KjmmZMjl6GfpISwTZl+a8W549jyGuYH7Gl8vSbMaE9/FI+kJW6XZQniTYfFqY8/a
 LbMSdNx1+yURisbkyO0vPqqwKw9r6UmsfGeUT8SpS3ff61yp4Oj436ra2qcPJsZ3
 cWl/lHItzX7oKFAWmr0Nmq2X8ac/8+NFyK29+V/QGfwtp3qAPbpA8XM5HrHw3rA2
 uk5uNSr3hwqz7P3+Hi7ZoO2m4nQTAbQnEunfYpxlOwz4IaM7qcGnntT6Jhwq1pGE
 /1YasG7bHeiWjhynmZZ4CWuMkogau2UJ/G68Cz7ehLhPNr8rH/ZFCJZ+XX0e0CgI
 1d+AwxZvgszIQVBY3S7sg8ezVSCPBXRFJ8rtzggGscqC53aP7L+rLfUFH+OKrhMg
 6n7RQiq4EmGDJGviB/R2HixI9CpdOf2puNhDKSJmPOqiSS7UuHMw8QCq++vdru+1
 GLGunGyO7D70yTV92KtsdzJlFlnfa/g+FIJrmaMpL3HH1h0stTctWX5xlTYmqEL3
 z3aUuT8RySk2t1FTabSj6KRWqE/krK5BMZbX91kpF27WL4c/olXFaZPqBDsj0q4u
 2rm1fIrc8RxLXctJan9ro092s/e9dup/1JxV5XWMq/EGS1ezvf+0XkCOtURaAWp3
 2aPHlx7M8iuq2SouL6f7
 =QMmY
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client updates from Anna Schumaker:
 "Highlights include:

  Features:
   - Add support for the NFS v4.2 COPY operation
   - Add support for NFS/RDMA over IPv6

  Bugfixes and cleanups:
   - Avoid race that crashes nfs_init_commit()
   - Fix oops in callback path
   - Fix LOCK/OPEN race when unlinking an open file
   - Choose correct stateids when using delegations in setattr, read and
     write
   - Don't send empty SETATTR after OPEN_CREATE
   - xprtrdma: Prevent server from writing a reply into memory client
     has released
   - xprtrdma: Support using Read list and Reply chunk in one RPC call"

* tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (61 commits)
  pnfs: pnfs_update_layout needs to consider if strict iomode checking is on
  nfs/flexfiles: Use the layout segment for reading unless it a IOMODE_RW and reading is disabled
  nfs/flexfiles: Helper function to detect FF_FLAGS_NO_READ_IO
  nfs: avoid race that crashes nfs_init_commit
  NFS: checking for NULL instead of IS_ERR() in nfs_commit_file()
  pnfs: make pnfs_layout_process more robust
  pnfs: rework LAYOUTGET retry handling
  pnfs: lift retry logic from send_layoutget to pnfs_update_layout
  pnfs: fix bad error handling in send_layoutget
  flexfiles: add kerneldoc header to nfs4_ff_layout_prepare_ds
  flexfiles: remove pointless setting of NFS_LAYOUT_RETURN_REQUESTED
  pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args
  pnfs: keep track of the return sequence number in pnfs_layout_hdr
  pnfs: record sequence in pnfs_layout_segment when it's created
  pnfs: don't merge new ff lsegs with ones that have LAYOUTRETURN bit set
  pNFS/flexfiles: When initing reads or writes, we might have to retry connecting to DSes
  pNFS/flexfiles: When checking for available DSes, conditionally check for MDS io
  pNFS/flexfile: Fix erroneous fall back to read/write through the MDS
  NFS: Reclaim writes via writepage are opportunistic
  NFSv4: Use the right stateid for delegations in setattr, read and write
  ...
2016-05-26 10:33:33 -07:00
Xin Long bed187b540 sctp: fix double EPs display in sctp_diag
We have this situation: that EP hash table, contains only the EPs
that are listening, while the transports one, has the opposite.
We have to traverse both to dump all.

But when we traverse the transports one we will also get EPs that are
in the EP hash if they are listening. In this case, the EP is dumped
twice.

We will fix it by checking if the endpoint that is in the endpoint
hash table contains any ep->asoc in there, as it means we will also
find it via transport hash, and thus we can/should skip it, depending
on the filters used, like 'ss -l'.

Still, we should NOT skip it if the user is listing only listening
endpoints, because then we are not traversing the transport hash.
so we have to check idiag_states there also.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-25 22:14:31 -07:00
Yan, Zheng 0e76abf21e libceph: make ceph_osdc_wait_request() uninterruptible
Ceph_osdc_wait_request() is used when cephfs issues sync IO. In most
cases, the sync IO should be uninterruptible. The fix is use killale
wait function in ceph_osdc_wait_request().

Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26 01:15:40 +02:00
Zhang Zhuoyu 3b33f692c8 ceph: make logical calculation functions return bool
This patch makes serverl logical caculation functions return bool to
improve readability due to these particular functions only using 0/1
as their return value.

No functional change.

Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
2016-05-26 01:15:39 +02:00
Ilya Dryomov 737cc81ead libceph: support for subscribing to "mdsmap.<id>" maps
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:30 +02:00
Ilya Dryomov 7cca78c9dc libceph: replace ceph_monc_request_next_osdmap()
... with a wrapper around maybe_request_map() - no need for two
osdmap-specific functions.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:30 +02:00
Ilya Dryomov b4f3479569 libceph: take osdc->lock in osdmap_show() and dump flags in hex
There is now about a dozen CEPH_OSDMAP_* flags.  This is a debugging
interface, so just dump in hex instead of spelling each flag out.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:29 +02:00
Ilya Dryomov 4609245e26 libceph: pool deletion detection
This adds the "map check" infrastructure for sending osdmap version
checks on CALC_TARGET_POOL_DNE and completing in-flight requests with
-ENOENT if the target pool doesn't exist or has just been deleted.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:29 +02:00
Ilya Dryomov d0b19705e9 libceph: async MON client generic requests
For map check, we are going to need to send CEPH_MSG_MON_GET_VERSION
messages asynchronously and get a callback on completion.  Refactor MON
client to allow firing off generic requests asynchronously and add an
async variant of ceph_monc_get_version().  ceph_monc_do_statfs() is
switched over and remains sync.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:29 +02:00
Ilya Dryomov b07d3c4bd7 libceph: support for checking on status of watch
Implement ceph_osdc_watch_check() to be able to check on status of
watch.  Note that the time it takes for a watch/notify event to get
delivered through the notify_wq is taken into account.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:28 +02:00
Ilya Dryomov 1907920324 libceph: support for sending notifies
Implement ceph_osdc_notify() for sending notifies.

Due to the fact that the current messenger can't do read-in into
pagelists (it can only do write-out from them), I had to go with a page
vector for a NOTIFY_COMPLETE payload, for now.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:28 +02:00
Ilya Dryomov 922dab6134 libceph, rbd: ceph_osd_linger_request, watch/notify v2
This adds support and switches rbd to a new, more reliable version of
watch/notify protocol.  As with the OSD client update, this is mostly
about getting the right structures linked into the right places so that
reconnects are properly sent when needed.  watch/notify v2 also
requires sending regular pings to the OSDs - send_linger_ping().

A major change from the old watch/notify implementation is the
introduction of ceph_osd_linger_request - linger requests no longer
piggy back on ceph_osd_request.  ceph_osd_event has been merged into
ceph_osd_linger_request.

All the details are now hidden within libceph, the interface consists
of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack().
ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep
the lifetime management simple.

ceph_osdc_notify_ack() accepts an optional data payload, which is
relayed back to the notifier.

Portions of this patch are loosely based on work by Douglas Fuller
<dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:02 +02:00
Ilya Dryomov 42b0696527 libceph: wait_request_timeout()
The unwatch timeout is currently implemented in rbd.  With
watch/unwatch code moving into libceph, we are going to need
a ceph_osdc_wait_request() variant with a timeout.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:14:06 +02:00
Ilya Dryomov 3540bfdb30 libceph: request_init() and request_release_checks()
These are going to be used by request_reinit() code.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:14:05 +02:00
Ilya Dryomov 5aea3dcd50 libceph: a major OSD client update
This is a major sync up, up to ~Jewel.  The highlights are:

- per-session request trees (vs a global per-client tree)
- per-session locking (vs a global per-client rwlock)
- homeless OSD session
- no ad-hoc global per-client lists
- support for pool quotas
- foundation for watch/notify v2 support
- foundation for map check (pool deletion detection) support

The switchover is incomplete: lingering requests can be setup and
teared down but aren't ever reestablished.  This functionality is
restored with the introduction of the new lingering infrastructure
(ceph_osd_linger_request, linger_work, etc) in a later commit.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:14:03 +02:00
Ilya Dryomov 9dd2845ccb libceph: protect osdc->osd_lru list with a spinlock
OSD client is getting moved from the big per-client lock to a set of
per-session locks.  The big rwlock would only be held for read most of
the time, so a global osdc->osd_lru needs additional protection.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:12:30 +02:00
Ilya Dryomov 7a28f59bf9 libceph: allocate ceph_osd with GFP_NOFAIL
create_osd() is called way too deep in the stack to be able to error
out in a sane way; a failing create_osd() just messes everything up.
The current req_notarget list solution is broken - the list is never
traversed as it's not entirely clear when to do it, I guess.

If we were to start traversing it at regular intervals and retrying
each request, we wouldn't be far off from what __GFP_NOFAIL is doing,
so allocate OSD sessions with __GFP_NOFAIL, at least until we come up
with a better fix.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:12:29 +02:00
Ilya Dryomov 0247a0cf3e libceph: osd_init() and osd_cleanup()
These are going to be used by homeless OSD sessions code.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:12:29 +02:00
Ilya Dryomov 42c1b12403 libceph: handle_one_map()
Separate osdmap handling from decoding and iterating over a bag of maps
in a fresh MOSDMap message.  This sets up the scene for the updated OSD
client.

Of particular importance here is the addition of pi->was_full, which
can be used to answer "did this pool go full -> not-full in this map?".
This is the key bit for supporting pool quotas.

We won't be able to downgrade map_sem for much longer, so drop
downgrade_write().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:12:27 +02:00
Ilya Dryomov e5253a7bde libceph: allocate dummy osdmap in ceph_osdc_init()
This leads to a simpler osdmap handling code, particularly when dealing
with pi->was_full, which is introduced in a later commit.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:29 +02:00
Ilya Dryomov fbca963532 libceph: schedule tick from ceph_osdc_init()
Both homeless OSD sessions and watch/notify v2, introduced in later
commits, require periodic ticks which don't depend on ->num_requests.
Schedule the initial tick from ceph_osdc_init() and reschedule from
handle_timeout() unconditionally.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:28 +02:00
Ilya Dryomov b37ee1b9b8 libceph: move schedule_delayed_work() in ceph_osdc_init()
ceph_osdc_stop() isn't called if ceph_osdc_init() fails, so we end up
with handle_osds_timeout() running on invalid memory if any one of the
allocations fails.  Call schedule_delayed_work() after everything is
setup, just before returning.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:28 +02:00
Ilya Dryomov fe5da05e97 libceph: redo callbacks and factor out MOSDOpReply decoding
If you specify ACK | ONDISK and set ->r_unsafe_callback, both
->r_callback and ->r_unsafe_callback(true) are called on ack.  This is
very confusing.  Redo this so that only one of them is called:

    ->r_unsafe_callback(true), on ack
    ->r_unsafe_callback(false), on commit

or

    ->r_callback, on ack|commit

Decode everything in decode_MOSDOpReply() to reduce clutter.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:28 +02:00
Ilya Dryomov 85e084feb4 libceph: drop msg argument from ceph_osdc_callback_t
finish_read(), its only user, uses it to get to hdr.data_len, which is
what ->r_result is set to on success.  This gains us the ability to
safely call callbacks from contexts other than reply, e.g. map check.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:27 +02:00
Ilya Dryomov bb873b5391 libceph: switch to calc_target(), part 2
The crux of this is getting rid of ceph_osdc_build_request(), so that
MOSDOp can be encoded not before but after calc_target() calculates the
actual target.  Encoding now happens within ceph_osdc_start_request().

Also nuked is the accompanying bunch of pointers into the encoded
buffer that was used to update fields on each send - instead, the
entire front is re-encoded.  If we want to support target->name_len !=
base->name_len in the future, there is no other way, because oid is
surrounded by other fields in the encoded buffer.

Encoding OSD ops and adding data items to the request message were
mixed together in osd_req_encode_op().  While we want to re-encode OSD
ops, we don't want to add duplicate data items to the message when
resending, so all call to ceph_osdc_msg_data_add() are factored out
into a new setup_request_data().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:27 +02:00
Ilya Dryomov a66dd38309 libceph: switch to calc_target(), part 1
Replace __calc_request_pg() and most of __map_request() with
calc_target() and start using req->r_t.

ceph_osdc_build_request() however still encodes base_oid, because it's
called before calc_target() is and target_oid is empty at that point in
time; a printf in osdc_show() also shows base_oid.  This is fixed in
"libceph: switch to calc_target(), part 2".

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:26 +02:00
Ilya Dryomov 63244fa123 libceph: introduce ceph_osd_request_target, calc_target()
Introduce ceph_osd_request_target, containing all mapping-related
fields of ceph_osd_request and calc_target() for calculating mappings
and populating it.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:26 +02:00
Ilya Dryomov 04812acf57 libceph: pi->min_size, pi->last_force_request_resend
Add and decode pi->min_size and pi->last_force_request_resend.  These
are going to be used by calc_target().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:26 +02:00
Ilya Dryomov f984cb76cc libceph: make pgid_cmp() global
calc_target() code is going to need to know how to compare PGs.  Take
lhs and rhs pgid by const * while at it.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:25 +02:00
Ilya Dryomov f81f16339a libceph: rename ceph_calc_pg_primary()
Rename ceph_calc_pg_primary() to ceph_pg_to_acting_primary() to
emphasise that it returns acting primary.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:25 +02:00
Ilya Dryomov 6f3bfd45cd libceph: ceph_osds, ceph_pg_to_up_acting_osds()
Knowning just acting set isn't enough, we need to be able to record up
set as well to detect interval changes.  This means returning (up[],
up_len, up_primary, acting[], acting_len, acting_primary) and passing
it around.  Introduce and switch to ceph_osds to help with that.

Rename ceph_calc_pg_acting() to ceph_pg_to_up_acting_osds() and return
both up and acting sets from it.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:25 +02:00
Ilya Dryomov d9591f5e28 libceph: rename ceph_oloc_oid_to_pg()
Rename ceph_oloc_oid_to_pg() to ceph_object_locator_to_pg().  Emphasise
that returned is raw PG and return -ENOENT instead of -EIO if the pool
doesn't exist.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:24 +02:00
Ilya Dryomov fcd00b68bb libceph: DEFINE_RB_FUNCS macro
Given

    struct foo {
        u64 id;
        struct rb_node bar_node;
    };

generate insert_bar(), erase_bar() and lookup_bar() functions with

    DEFINE_RB_FUNCS(bar, struct foo, id, bar_node)

The key is assumed to be an integer (u64, int, etc), compared with
< and >.  nodefld has to be initialized with RB_CLEAR_NODE().

Start using it for MDS, MON and OSD requests and OSD sessions.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:23 +02:00
Ilya Dryomov 42a2c09f2b libceph: open-code remove_{all,old}_osds()
They are called only once, from ceph_osdc_stop() and
handle_osds_timeout() respectively.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:23 +02:00
Ilya Dryomov 0c0a8de13f libceph: nuke unused fields and functions
Either unused or useless:

    osdmap->mkfs_epoch
    osd->o_marked_for_keepalive
    monc->num_generic_requests
    osdc->map_waiters
    osdc->last_requested_map
    osdc->timeout_tid

    osd_req_op_cls_response_data()

    osdmap_apply_incremental() @msgr arg

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:23 +02:00
Ilya Dryomov d30291b985 libceph: variable-sized ceph_object_id
Currently ceph_object_id can hold object names of up to 100
(CEPH_MAX_OID_NAME_LEN) characters.  This is enough for all use cases,
expect one - long rbd image names:

- a format 1 header is named "<imgname>.rbd"
- an object that points to a format 2 header is named "rbd_id.<imgname>"

We operate on these potentially long-named objects during rbd map, and,
for format 1 images, during header refresh.  (A format 2 header name is
a small system-generated string.)

Lift this 100 character limit by making ceph_object_id be able to point
to an externally-allocated string.  Apart from being able to work with
almost arbitrarily-long named objects, this allows us to reduce the
size of ceph_object_id from >100 bytes to 64 bytes.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:22 +02:00
Ilya Dryomov 711da55d36 libceph: change how osd_op_reply message size is calculated
For a message pool message, preallocate a page, just like we do for
osd_op.  For a normal message, take ceph_object_id into account and
don't bother subtracting CEPH_OSD_SLAB_OPS ceph_osd_ops.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:21 +02:00
Ilya Dryomov 13d1ad16d0 libceph: move message allocation out of ceph_osdc_alloc_request()
The size of ->r_request and ->r_reply messages depends on the size of
the object name (ceph_object_id), while the size of ceph_osd_request is
fixed.  Move message allocation into a separate function that would
have to be called after ceph_object_id and ceph_object_locator (which
is also going to become variable in size with RADOS namespaces) have
been filled in:

    req = ceph_osdc_alloc_request(...);
    <fill in req->r_base_oid>
    <fill in req->r_base_oloc>
    ceph_osdc_alloc_messages(req);

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:21 +02:00