Verify that if a context is active at the time it is closed, that it is
either persistent and preemptible (with hangcheck running) or it shall
be removed from execution.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-close
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-3-chris@chris-wilson.co.uk
(cherry picked from commit d3bb2f9b5e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently, we check we can send a pulse prior to disabling the
heartbeat to verify that we can change the heartbeat, but since we may
re-evaluate execution upon changing the heartbeat interval we need another
pulse afterwards to refresh execution.
v2: Tvrtko asked if we could reduce the double pulse to a single, which
opened up a discussion of how we should handle the pulse-error after
attempting to change the property, and the desire to serialise
adjustment of the property with its validating pulse, and unwind upon
failure.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-2-chris@chris-wilson.co.uk
(cherry picked from commit 3dd66a94de)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We only allow persistent requests to remain on the GPU past the closure
of their containing context (and process) so long as they are continuously
checked for hangs or allow other requests to preempt them, as we need to
ensure forward progress of the system. If we allow persistent contexts
to remain on the system after the the hangcheck mechanism is disabled,
the system may grind to a halt. On disabling the mechanism, we sent a
pulse along the engine to remove all executing contexts from the engine
which would check for hung contexts -- but we did not prevent those
contexts from being resubmitted if they survived the final hangcheck.
Fixes: 9a40bddd47 ("drm/i915/gt: Expose heartbeat interval via sysfs")
Testcase: igt/gem_ctx_persistence/heartbeat-stop
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200928221510.26044-1-chris@chris-wilson.co.uk
(cherry picked from commit 7a991cd3e3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The reordering and rebasing of commit 2e4c6c1a9d ("drm/i915: Remove
i915_request.lock requirement for execution callbacks") caused it to
revert an earlier correction. Let us restore commit 99f0a640d464
("drm/i915: Remove requirement for holding i915_request.lock for
breadcrumbs")
Fixes: 2e4c6c1a9d ("drm/i915: Remove i915_request.lock requirement for execution callbacks")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925101107.27869-1-chris@chris-wilson.co.uk
(cherry picked from commit 35faeb7de9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since the debugfs may peek into the GEM contexts as the corresponding
client/fd is being closed, we may try and follow a dangling pointer.
However, the context closure itself is serialised with the ctx->mutex,
so if we hold that mutex as we inspect the state coupled in the context,
we know the pointers within the context are stable and will remain valid
as we inspect their tables.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723172119.17649-3-chris@chris-wilson.co.uk
(cherry picked from commit 102f5aa491)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In case backoff fails with an error, we return an undefined rq,
assign err to rq correctly.
Fixes: 8a929c9eb1 ("drm/i915: Use ww pinning for intel_context_create_request()")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918111208.1392128-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 4316b19dee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As the error capture will compress user buffers as directed to by the
user, it can take an arbitrary amount of time and space. Break up the
compression loops with a call to cond_resched(), that will allow other
processes to schedule (avoiding the soft lockups) and also serve as a
warning should we try to make this loop atomic in the future.
Testcase: igt/gem_exec_capture/many-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916090059.3189-2-chris@chris-wilson.co.uk
(cherry picked from commit 293f43c80c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This code should use "vma[1]" instead of "vma". The "vma" variable is a
valid pointer.
Fixes: 6b05030496 ("drm/i915: Convert i915_gem_object/client_blt.c to use ww locking as well, v2.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075243.GG12635@kadam
(cherry picked from commit 68ba71e3ae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we create a new node, it is possible for the slab allocator to return
us a recently freed node. If that node was just retired, it will retain
the current jiffy as its node->age. There is then a miniscule window,
where as that node is retired, it will appear on the free list with an
incorrect age and be eligible for reuse by one thread, and then by a
second thread as the correct node->age is written.
Fixes: 06b73c2d0b ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-3-chris@chris-wilson.co.uk
(cherry picked from commit 9bb34ff25c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Let's not try and use PAT attributes for I915_MAP_WC if the CPU doesn't
support PAT.
Fixes: 6056e50033 ("drm/i915/gem: Support discontiguous lmem object maps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-2-chris@chris-wilson.co.uk
(cherry picked from commit 121ba69ffd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On 32b, highmem using a finite set of indirect PTE (i.e. vmap) to provide
virtual mappings of the high pages. As these are finite, map_new_virtual()
must wait for some other kmap() to finish when it runs out. If we map a
large number of objects, there is no method for it to tell us to release
the mappings, and we deadlock.
However, if we make an explicit vmap of the page, that uses a larger
vmalloc arena, and also has the ability to tell us to release unwanted
mappings. Most importantly, it will fail and propagate an error instead
of waiting forever.
Fixes: fb8621d3be ("drm/i915: Avoid allocating a vmap arena for a single page") #x86-32
References: e87666b52f ("drm/i915/shrinker: Hook up vmap allocation failure notifier")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20200915091417.4086-1-chris@chris-wilson.co.uk
(cherry picked from commit 060bb115c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same ECC check has been executed in amdgpu_ras_init for vega10,
prior to gmc_v9_0_late_init.
v2: drop all atombios helper callings
v3: use bit operation
v4: correct inline comment, remove parity check statement
v5: squash in build fix
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add code to gracefuly handle any pipe reassignment
occuring on dcn3 hardware. This should only happen when new
surfaces are used for an update rather than old ones updated.
Fixes: 69fc1f4b97 ("amd/drm/display: avoid dcn3 on flip opp change for slave pipes")
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxhub functions are now called from function pointers,
instead of from asic-specific functions.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow user to know number of compute units (CU) that are in use at any
given moment.
[How]
Read registers of SQ that give number of waves that are in flight
of various queues. Use this information to determine number of CU's
in use.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Header file exports functions get_gpu_clock_counter(), get_cu_info() and
select_se_sh() that are defined to be static
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.
Fixes: 02cf91c113 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttm_mem_type_manager_func.get_node was changed to return -ENOSPC
instead of setting the node pointer to NULL. Unfortunately
vmwgfx still had two places where it was explicitly converting
-ENOSPC to 0 causing regressions. This fixes those spots by
allowing -ENOSPC to be returned. That seems to fix recent
regressions with vmwgfx.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Sigend-off-by: Roland Scheidegger <sroland@vmware.com>
Commit 78fe9f6394 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes: 78fe9f6394 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VG20 DIDs 66a0, 66a1 and 66a4 are used for various SKUs that may or may
not have the FRU EEPROM on it. Parse the VBIOS to check for server SKU
variants (D131 or D134) until a more general solution can be determined.
v2: Remove string-based logic, correct the VBIOS string comment
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The state array is in the reverse order compared to other asics
(high to low rather than low to high).
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 78fe9f6394 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.
Fixes: 78fe9f6394 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add one sysfs file -- "pp_od_clk_voltage" for
Raven/Raven2/Picasso APU, which is only used by dGPU like VEGA10.
This sysfs file supports the feature to modify gfx engine clock(Mhz units), it can
be used to configure the min value and the max value for gfx clock limited in the
safe range.
Command guide:
echo "s level clock" > pp_od_clk_voltage
s - adjust teh sclk level
level - 0 or 1, "0" represents the min value, "1" represents the max value
clock - the clock value(Mhz units), like 400, 800 or 1200, the value must be within the
OD_RANGE limits.
Example:
$ cat pp_od_clk_voltage
OD_SCLK:
0: 200Mhz
1: 1400Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
$ echo "s 0 600" > pp_od_clk_voltage
$ echo "s 1 1000" > pp_od_clk_voltage
$ cat pp_od_clk_voltage
OD_SCLK:
0: 600Mhz
1: 1000Mhz
OD_RANGE:
SCLK: 200MHz 1400MHz
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new trace event to track the PTE update
events. This specific event will provide information like:
- start and end of virtual memory mapping
- HW engine flags for the map
- physical address for mapping
This will be particularly useful for memory profiling tools
(like RMV) which are monitoring the page table update events.
V2: Added physical address lookup logic in trace point
V3: switch to use __dynamic_array
added nptes int the TPprint arguments list
added page size in the arg list
V4: Addressed Christian's review comments
add start/end instead of seg
use incr instead of page_sz to be accurate
V5: Addressed Christian's review comments:
add pid and vm context information in the event
V6: Re-sequence the variables (put pid and ctx_id first)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should be one copy-paste typo.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6fb4 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This addresses the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2740:6:
warning: symbol 'dce110_set_cursor_position' was not declared. Should it
be static?
drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:2785:6:
warning: symbol 'dce110_set_cursor_attribute' was not declared. Should
it be static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This addresses the following sparse warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_hw_sequencer.c:180:26:
warning: symbol 'get_color_space_type' was not declared. Should it be
static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At the moment on flip opp reassignment does not work in all cases
for non root pipes.
This change simply makes sure we prefer pipes not used previously
when splitting in dcn3.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.
[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Definition for retaining ABM settings during disable
- Addition of some new AUX interface definitions
- Addition of some outbox definitions
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
At the moment, some tests are failing because cur_link_settings is
invalid. As a workaround, add an option to force dio disable.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently, when full p-state changes are not supported, DLG parameters
are calculated for no p-state support at all. However, we are required
to always support dummy p-state changes, so we should instead calculate
DLG based on dummy p-state latency when full p-state is unsupported.
This behaviour already exists for DCN2.
[How]
- move DLG calculation inside WM calculation
- if p-state unsupported, do not recalculate for set A, instead copy from
set C, and perform DLG calculation with dummy p-state latency
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.
[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some debug bits are not being copied from driver to fw.
[How]
Copy debug bits properly.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
-----BEGIN PGP SIGNATURE-----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=NyM2
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.10
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914231227.30500-1-chunkuang.hu@kernel.org
* DSI support for sm8150/sm8250
* Support for per-process GPU pagetables (finally!) for a6xx.
There are still some iommu/arm-smmu changes required to
enable, without which it will fallback to the current single
pgtable state. The first part (ie. what doesn't depend on
drm side patches) is queued up for v5.10[1].
* DisplayPort support. Userspace DP compliance tool support
is already merged in IGT[2]
* The usual assortment of smaller fixes/cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
Previously intel_dump_pipe_config() used to dump the full crtc state
whether or not the crtc was logically enabled or not. As that meant
occasionally dumping confusing stale garbage I changed it to
check whether the crtc is logically enabled or not. However I did
not realize that the state checker readout code does not
populate crtc_state.hw.{active,enabled}. Hence the state checker
dump would only give us a full dump of the sw state but not the hw
state. Fix that by populating those bits of the hw state as well.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Fixes: 10d75f5428 ("drm/i915: Fix plane state dumps")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200925131656.10022-2-ville.syrjala@linux.intel.com
(cherry picked from commit 504c7bd85c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix the incorrect function prototype for dp_debug_get()
in the dp_debug module to address compilation warning.
Also add prototype for msm_dp_debugfs_init() for fixing compilation
issue with other defconfigs.
changes in v2:
- add prototype for msm_dp_debugfs_init()
Fixes: f913454aae ("drm/msm/dp: move debugfs node to /sys/kernel/debug/dri/*/")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Revert the guilty change introduced by the commit below:
drm/amd/pm: postpone SOCCLK/UCLK enablement after DAL initialization(V2)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_fs_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1284:2: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result [-Wunused-result]
1284 | sysfs_create_group(&adev->dev->kobj, &group);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
v2: just print an error for sysfs group creation failure
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge ras sysfs creation together by calling sysfs_create_group
once, as sysfs_update_group may not work properly as expected.
v2: improve commit message
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In FLR routine, init_data_exchange is called at reset_sriov
while fini_data_exchange is not. This will duplicating work
thread.
So call fini_data_exchange before reset for SRIOV
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Refactor the driver code to use amdgpu_virt_read_pf2vf_data
and amdgpu_virt_write_vf2pf_data instead of writing all code in
one function (which is the old amdgpu_virt_init_data_exchange)
- Adding a new transaction method for VF2PF message between host
and guest driver. Guest side will periodically update VF2PF
message in the framebuffer.
In the new header, we include guest ucode information, guest
framebuffer usage, and engine usage
- Clean up the old macros since they will cause compile error if
the new transaction method is used
v2: squash in build fix
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Documents PP_FEATURE_MASK enum.
Provides instructions on how to use ppfeaturemasks.
v2: improve enum definitions and add kernel command line parameters to
ppfeaturemask instructions
v3: fix alignment issues
Signed-off-by: Ryan Taylor <ryan.taylor@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable UMC RAS in lieu of stability issues on certain sku
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to set different defaults on a per asic basis. This
way we can enable noretry on dGPUs where it can increase performance
in certain cases and disable it on chips where it can be problematic.
For now the default is 0 for all asics, but we may want to try and
enable it again for newer dGPUs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to have different defaults per asic
in a future patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly handle clang and older versions of gcc.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to
accelerate sw_init for navi12.
v2: skip above fw in SRIOV for vega10 and sienna_cichlid
v3: directly skip psp fw loading in SRIOV
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smc fw is not needed in SRIOV, thus driver should not try to get smc
fw data.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to clear event again since event always clear before wait.
This fix depend on patch:
"soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api"
Fixes: 2f965be7f9 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-10-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add clear parameter to let client decide if
event should be clear to 0 after GCE receive it.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/1594136714-11650-9-git-send-email-dennis-yc.hsieh@mediatek.com
[mb: fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The HVS FIFOs are currently assigned each time we have an atomic_check
for all the enabled CRTCs.
However, if we are running multiple outputs in parallel and we happen to
disable the first (by index) CRTC, we end up changing the assigned FIFO
of the second CRTC without disabling and reenabling the pixelvalve which
ends up in a stall and eventually a VBLANK timeout.
In order to fix this, we can create a special value for our assigned
channel to mark it as disabled, and if our CRTC already had an assigned
channel in its previous state, we keep on using it.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-2-maxime@cerno.tech
The current CRTC state reset hook in vc4 allocates a vc4_crtc_state
structure as a drm_crtc_state, and relies on the fact that vc4_crtc_state
embeds drm_crtc_state as its first member, and therefore can be safely
cast.
However, this is pretty fragile especially since there's no check for this
in place, and we're going to need to access vc4_crtc_state member at reset
so this looks like a good occasion to make it more robust.
Fixes: 6d6e500391 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200923084032.218619-1-maxime@cerno.tech
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS
configs, so don't set it in this ARM specific driver part.
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS
configs, so don't set it in this ARM specific driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
drm/i915 fixes for v5.9-rc7:
- Fix selftest reference to stack data out of scope
- Fix GVT null pointer dereference
- Backmerge from Linus' master to fix build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zh5fpmha.fsf@intel.com
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
The HVS has three FIFOs that can be assigned to a number of PixelValves
through a mux.
However, changing that FIFO requires that we disable and then enable the
pixelvalve, so we want to assign FIFOs to all the enabled CRTCs, and not
just the active ones.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918145918.101068-1-maxime@cerno.tech
Since we store a pointer to the fake iommu device that is allocated on
the stack, as soon as we leave the function it goes out of scope and any
future dereference is undefined behaviour. Just in case we may need to
look at the fake iommu device after initialiation, move the allocation
from the stack into the data.
Fixes: 01b9d4e211 ("iommu/vt-d: Use dev_iommu_priv_get/set()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916105022.28316-2-chris@chris-wilson.co.uk
(cherry picked from commit 9f9f4101fc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX2jGxQAKCRDj7w1vZxhR
xR3DAQCiZOnaxVcY49iG4343Z1aHHaIEShbnB0bDdaWstn7kiQD/UXBXUoOSFoFQ
FkTsW31JsdXNnWP5e6/eJd2Lb6waVAA=
=VlsU
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-09-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.10:
UAPI Changes:
Cross-subsystem Changes:
- virtio: Merged a PR for patches that will affect drm/virtio
Core Changes:
- dev: More devm_drm convertions and removal of drm_dev_init
- atomic: Split out drm_atomic_helper_calc_timestamping_constants of
drm_atomic_helper_update_legacy_modeset_state
- ttm: More rework
Driver Changes:
- i915: selftests improvements
- panfrost: support for Amlogic SoC
- vc4: one fix
- tree-wide: conversions to devm_drm_dev_alloc,
- ast: simplifications of the atomic modesetting code
- panfrost: multiple fixes
- vc4: multiple fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan
- Fill asoc card owner in vc4.
- Program secondary CSC correctly in sun4i, and extend
register mapping to cover secondary CSC registers.
-----BEGIN PGP SIGNATURE-----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=AYyq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-09-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc6:
- Fill asoc card owner in vc4.
- Program secondary CSC correctly in sun4i, and extend
register mapping to cover secondary CSC registers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e3ab56cf-3b8e-9b21-f1b6-9a4989a52996@linux.intel.com
- Reduce INTEL_DISPLAY_ENABLED to just removed outputs treating it as disconnected (Ville)
- Introducing new AUX, DVO, and TC ports and refactoring code around hot plug interrupts for those. (Ville)
- Centralize PLL_ENABLE register lookup (Anusha)
- Improvements around DP downstream facing ports (DFP). (Ville)
- Enable YCbCr 444->420 conversion for HDMI DFPs. Ville
- Remove the old global state on Display's atomic modeset (Ville)
- Nuke force_min_cdclk_changed (Ville)
- Extend a TGL W/A to all SKUs and to RKL (Swathi)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl9jzm4ACgkQ+mJfZA7r
E8otXgf/V0gGTWSo/CUiBIDjW6jn9f/1pRmF2W0a0M8duLwlFMGVj/TGecgHRTNf
ZHd66tqb7v2wxc+YouGYYZNcKyWwdH8nhTEjn8Zt3cIc2lweh3cWKIr0S+MiBQGo
klaq+knIbr9gk3tJS4gvM0OQv0lPoXp6Gu8FsTAfmvkdt8L93OeNpmbA4TtSFbv5
sVm6e4LWI36TZuDO5VRDHTfLrQ7XkVte5sk2CzRRap+L77+RpBwD8p+QovRmNK4Q
hTlfDHrLZR2XGpeTlqnqfzYq210hNyDspdhTENcnFrrxtB6pvd/CfOGRqEm/9MvX
A37jLJfTtpeLRlQJDPt3KzOG581a+A==
=gR/1
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2020-09-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver Changes:
- Reduce INTEL_DISPLAY_ENABLED to just removed outputs treating it as disconnected (Ville)
- Introducing new AUX, DVO, and TC ports and refactoring code around hot plug interrupts for those. (Ville)
- Centralize PLL_ENABLE register lookup (Anusha)
- Improvements around DP downstream facing ports (DFP). (Ville)
- Enable YCbCr 444->420 conversion for HDMI DFPs. Ville
- Remove the old global state on Display's atomic modeset (Ville)
- Nuke force_min_cdclk_changed (Ville)
- Extend a TGL W/A to all SKUs and to RKL (Swathi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918173013.GA748558@intel.com
This is a handful of patches that add bridge support for Tegra devices
and fix a couple of minor issues.
-----BEGIN PGP SIGNATURE-----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=Ojrd
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.10-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.10-rc1
This is a handful of patches that add bridge support for Tegra devices
and fix a couple of minor issues.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200921121245.3953659-1-thierry.reding@gmail.com
Modify the comment typo: "definately" -> "definitely".
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function dal_ddc_service_query_ddc_data,
get rid of dal_ddc_i2c_payloads_destroy, call
dal_vector_destruct() directly.
This change is to make the code run a bit fast.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Changes since V1:
*get rid of dal_ddc_i2c_payloads_destroy, call
dal_vector_destruct() directly.
Link for V1:
*https://lore.kernel.org/patchwork/patch/1309014/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the comment typo: "programm" -> "program".
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the comment typo: "programm" -> "program".
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added IP block section to amdgpu.rst.
Added more documentation to amd_ip_funcs.
Created documentation for amd_ip_block_type.
v2: Provides a more detailed DOC section on IP blocks
v3: Clarifies the IP block list. Adds info on IP block enumeration.
Signed-off-by: Ryan Taylor <ryan.taylor@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmHDP_READ_CACHE_INVALIDATE register is in HDP not in NBIO
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As this is already set inside the implementation of
smu_set_watermarks_table().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As they have no real dependence. And for Navi1x, the socclk/uclk dpms
are enabled after DAL initialization.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise, that will be always true for Navi14.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GCEA/MMHUB EA error should not result to DF freeze, this is
fixed in next generation, but for some reasons the GCEA/MMHUB
EA error will result to DF freeze in previous generation,
diver should avoid to indicate GCEA/MMHUB EA error as hw fatal
error in kernel message by read GCEA/MMHUB err status registers.
Changed from V1:
make query_ras_error_status function more general
make read mmhub er status register more friendly
Changed from V2:
move ras error status query function into do_recovery workqueue
Changed from V3:
remove useless code from V2, print GCEA error status
instance number
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Different mclk dpm policy will be applied based on the VRAM
width.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add new SCRATCH0 status bits for detecting restore state
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HDMI requires fallback to TMDS by redetection
in order to switch PHY settings.
This avoids black out when link training fail
during mode setting, link quality update,
disable driver sequence.
[How]
Allow driver to redetect HDMI displays
based on retraining or fallback mechanism.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When running a game/benchmark with v-sync disabled, disabling a plane
(which is v-sync) can cause an underflow. This is due to flips that are
pending before pipe locking being applied after locks are released and
pipes have been re-arranged or disconnected. This can potentially apply
a flip on the incorrect pipe.
[How]
Check that any pending flips are cleared before locking any pipes to
ensure flips are applied on the correct pipes.
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DMUB implementation of PSR, the 'wait' parameter,
used to determine if driver should wait for PSR enable/disable,
is not implemented correctly.
[How]
Implement wait for PSR enable/disable.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Regression is caused by previous change with attempt to correct the
extended cr aux rd interval delay due to mis interpretation of the DP specs.
The change turns out not working well with certain RXs.
So we decided to keep the cr aux rd interval logic as before.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In DCN10 when a panel with YCbCr420 capability is connected via
USB-C to HDMI active dongle, no YCbCr420 option is listed in
Radeon settings.
[HOW]
Enable DP YCbCr420 mode support for DCN10
Signed-off-by: Gary Li <gary.li@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When disabling DP video, the current REG_WAIT timeout
of 50ms is too low for certain cases with very high
VSYNC intervals.
[HOW]
Increase the timeout to 102ms, so that
refresh rates as low as 10Hz can be handled properly.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
[WHY]
Only the leftmost ODM pipe should be offset when scaling. A previous
code change was intended to implement this policy, but a section of code
was overlooked.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
[Why]
We dont's turn off backlight before power off eDP (VDD),
which is a violation of eDP specs.
[How]
Power off eDP backlight before power off eDP
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dce_is_panel_backlight_on() will return wrong value if
LVTMA_BLON_OVRD is 0
[How]
When LVTMA_BLON_OVRD is 0, read
LVTMA_PWRSEQ_TARGET_STATE instead
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we're dynamically allocating the CPU VCRAT, use kvmalloc in case
the allocation size is huge.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd is dumping a stack during initialization.
kfd_procfs_add_sysfs_stats is being called twice. This removes one of
them.
Fixes: 4327bed2ff ("drm/amdkfd: Add process eviction counters to sysfs")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always start vblank timer, but only calls vblank function
when vblank is enabled.
This is used to fix the dead lock issue.
When drm_crtc_vblank_off want to disable vblank,
it first get event_lock, and then call hrtimer_cancel,
but hrtimer_cancel want to wait timer handler function finished.
Timer handler also want to aquire event_lock in drm_handle_vblank.
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
read/writes to aux_dpcd_* sysfs entries leads to system
reboot or hang.
Hence fix the handling of input data and reporting of errors
appropriately to the user space.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move doorbell allocation for a process into kfd device and
allocate doorbell space in each PDD during process creation.
Currently, KFD manages its own doorbell space but for some
devices, amdgpu would allocate the complete doorbell
space instead of leaving a chunk of doorbell space for KFD to
manage. In a system with mix of such devices, KFD would need
to request process doorbell space based on the type of device,
either from amdgpu or from its own doorbell space.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of guessing at a sufficient size for the CPU VCRAT, base the
size on the number of online NUMA nodes.
v2: fix warning
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remember KFD module initializaton status in a global variable. Skip KFD
device probing when the module was not initialized. Other amdgpu_amdkfd
calls are then protected by the adev->kfd.dev check.
Also print a clear error message when KFD disables itself. Amdgpu
continues its initialization even when KFD failed.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We found two unused variables new_cnt and old_cnt when build kernel with
W=1.
So delete it.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Leave the inuse count intact on map failure to keep the accounting
accurate.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In the case where we have a back-to-back submission that shares the same
BO, this BO will be prematurely moved to inactive_list while retiring the
first submit. But it will be still part of the second submit which is
being processed by the GPU. Now, if the shrinker happens to be triggered at
this point, it will result in a premature purging of this BO.
To fix this, we need to refcount BO while doing submit and retire. Then,
it should be moved to inactive list when this refcount becomes 0.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The reference to the VSP device acquired with of_find_device_by_node()
in rcar_du_vsp_init() is never released. Fix it with a drmm action,
which gets run both in the probe error path and in the remove path.
Fixes: 6d62ef3ac3 ("drm: rcar-du: Expose the VSP1 compositor through KMS planes")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar_dw_hdmi driver is also used on Renesas RZ/G2 SoCs. Update the
Kconfig entry description to reflect this.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU driver handles non-visible planes (fully clipped by the display's
boundaries) by considering them as disabled. It thus disables the plane
at the hardware level when the plane is moved off-screen. However, if
the plane was previously disabled and is non-visible when it gets
enabled, the attempt to disable it crashes, as the plane wasn't
previously enabled. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
When creating a frame buffer, the driver verifies that the pitches for
the chroma planes match the luma plane. This is done incorrectly for
fully planar YUV formats, without taking horizontal subsampling into
account. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The LVDS encoder on RZ/G2H (R8A774E1) SoC is identical to R-Car Gen3 so
just reuse the rcar_lvds_gen3_info structure to hookup R8A774E1 to LVDS
encoder driver.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Hookup RZ/G2H (R8A774E1) to DU driver. R8A774E1 has one RGB output,
one LVDS output and one HDMI output.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Replaced 'error' variable with 'ret']
[Renamed regulator from 'vcc' to 'power']
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Since commit 9495b7e92f ("driver core: platform: Initialize dma_parms
for platform devices") driver core handles allocation of the dma_parms
structure for platform device, so there is no need to manually allocate
nor free it.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The vc4 display engine has a first controller called the HVS that will
perform the composition of the planes. That HVS has 3 FIFOs and can
therefore compose planes for up to three outputs. The timings part is
generated through a component called the Pixel Valve, and the BCM2711 has 6
of them.
Thus, the HVS has some bits to control which FIFO gets output to which
Pixel Valve. The current code supports that muxing by looking at all the
CRTCs in a new DRM atomic state in atomic_check, and given the set of
constraints that we have, assigns FIFOs to CRTCs or reject the mode
entirely. The actual muxing will occur during atomic_commit.
However, that doesn't work if only a fraction of the CRTCs' state is
updated in that state, since it will ignore the CRTCs that are kept running
unmodified, and will thus unassign its associated FIFO, and later disable
it.
In order to make the code work as expected, let's pull the CRTC state of
all the enabled CRTC in our atomic_check so that we can operate on all the
running CRTCs, no matter whether they are affected by the new state or not.
Fixes: 87ebcd42fb ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech
Update kernel-doc line comments to fix warnings reported by make W=1.
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'glob' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'from_wq' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'extra' not described in 'ttm_shrink'
drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or
member 'ctx' not described in 'ttm_shrink'
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/391317/
Signed-off-by: Christian König <christian.koenig@amd.com>
This adds the required GPU quirks, including the quirk in the PWR
registers at the GPU reset time and the IOMMU quirk for shareability
issues observed on G52 in Amlogic G12B SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-4-narmstrong@baylibre.com
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset
time.
Since the Amlogic's integration of the GPU cores with the SoC is not
publicly documented we do not know what does these values, but they
permit having a fully functional GPU running with Panfrost.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-3-narmstrong@baylibre.com
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM,
G12A/SM1 & G12B SoCs needs a quirk in the PWR registers after each reset.
This adds a callback in the device compatible struct of permit this.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[Steven: Fix typo in commit log]
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-2-narmstrong@baylibre.com
Convert to using devm_drm_dev_alloc(),
as drm_dev_init() is going away.
v2: Remove drm_dev_put() since
a) devres doesn't do refcounting, see
Documentation/driver-api/driver-model/devres.rst,
Section 4, paragraph 1; and since
b) devres acts as garbage collector when
the DRM device's parent's devres "action" callback
is called to free the container device (amdgpu_device),
which embeds the DRM dev.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-4-daniel.vetter@ffwll.ch
To avoid having to create all the device and driver scaffolding we
just manually create and destroy a devres_group.
v2: Rebased
v3: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v4:
- Fix IS_ERR handling (Matt)
- Delete surplus put_device() in mock_device_release (intel-gfx-ci)
v5:
- do not switch to device_add - it breaks runtime pm in the tests and
with the devres_group_add/release no longer needed for automatic
cleanup (CI). Update commit message to match.
- print correct error in pr_err (Matt)
v6: Remove now unused err variable (CI).
v7: More warning fixes ...
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (v4)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch
Just some prep work before we rework the lifetime handling, which
requires replacing all the drm_dev_put in selftests by something else.
v2: Don't go with a static inline, upsets the header tests and
separation.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-2-daniel.vetter@ffwll.ch
Chris Wilson