Commit Graph

781849 Commits

Author SHA1 Message Date
Chung-Hsien Hsu 4ad298da93 brcmfmac: add FT-based AKMs in brcmf_set_key_mgmt() for FT support
Add WLAN_AKM_SUITE_FT_8021X and WLAN_AKM_SUITE_FT_PSK in
brcmf_set_key_mgmt() for FT support.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-31 18:44:40 +03:00
Jia-Shyr Chuang 2fef681a4c brcmfmac: add CYW89342 mini-PCIe device
CYW89342 is a 2x2 MIMO, 802.11a/b/g/n/ac for WLAN. It is a member of
4355/4359 family.

Signed-off-by: Jia-Shyr Chuang <saint.chuang@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-31 18:44:08 +03:00
Dan Carpenter 3348ef6a6a libertas_tf: prevent underflow in process_cmdrequest()
If recvlength is less than MESSAGE_HEADER_LEN (4) we would end up
corrupting memory.

Fixes: c305a19a0d ("libertas_tf: usb specific functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-31 18:43:36 +03:00
Rosen Penev 62a25dc569 mt76x2u: Add support for Alfa AWUS036ACM
A 2x2 unit with a USB dock for optimal placement.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-31 18:43:04 +03:00
Varsha Rao 057118edfc cw1200: Remove extra parentheses
Remove unnecessary parentheses to fix the extraneous parentheses clang
warning.

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-31 18:42:25 +03:00
Varsha Rao 9e9e11d832 brcmsmac: Remove extra parentheses
Remove the unnecessary parentheses to fix the clang warning of
extraneous parentheses.

Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-31 18:41:27 +03:00
Kalle Valo 647d2886a8 iwlwifi patches for 4.20
* One fix for channel-switch handling;
 * Some improvements in the HE code;
 * New FW API handling;
 * Improvements in the debugging code;
 * Some improvements in the PCI recovery mechanism;
 * Support for a few FW API changes;
 * Enable a new scanning feature;
 * Continued work on HE (mostly radiotap);
 * Some fixes in the FW rate-scaling implementation;
 * Other clean-ups and small fixes and improvements;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAluI/0QACgkQoUecoho8
 xfpq1g/9GXjQprSzVI0YPClmiT7mHTJSG2qNcQv2D3Hsguf1j6IQ9LUuusyqCQWH
 oTrXFhonETWU6ZSodd5SRG5HqxgndDx39dEjoBLh7oogHCpYlShlB1Np/Nnl4Ior
 lMrLULrHY5I8DqjwdHN27KfbBI2gu25kuwPXxolAs1Vb0uf51VHoUDzu+HDik5w3
 7oaYqJnGA6H1oAuTVkY53kQ1lPAFS7TqZbvJfNAQcDvQQ71H36x95hKa9a47oJGh
 /WT9qAp8QHWeM0cN7BtJOWSgJPcQ4UmWKNp2vky2sozd+mS1e2iSQmiJ7poSejkn
 7yef/vKO86KF7B0tOQie0jDzok1VkRj92Dw5gwSmpJbHI0RtoLGvyrE4LzErSFi9
 SEKpC5dS/dLtWc+wytiO/k3XAh7vSOQsOCfsoqoU5l7XTehiCRfUI2p1wPXc7Xo+
 z+Q4vo7a1S5903aVFZWs9FVm/3hEu2FNG8xcIUwcuWO+Ma5X/c3xzkhvB8nIy1mx
 2Z8TjSgQjpVfVZagKQc/GHHTundnp0sdQi1qUZ7WGY0wj831tWxHKJ3K3knGsMmU
 UHG0+kegHQ09ieSH/0yArHohf77u7viLnzgDIJhOpcfC79Lx45HVP08K4iET+/k0
 saq2JUT22Cx/vEo7dioLhJvaMk6auFLpjZJ5ZUMSEbqQqmhLRwA=
 =4JQU
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-next-for-kalle-2018-08-31' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

iwlwifi patches for 4.20

* One fix for channel-switch handling;
* Some improvements in the HE code;
* New FW API handling;
* Improvements in the debugging code;
* Some improvements in the PCI recovery mechanism;
* Support for a few FW API changes;
* Enable a new scanning feature;
* Continued work on HE (mostly radiotap);
* Some fixes in the FW rate-scaling implementation;
* Other clean-ups and small fixes and improvements;
2018-08-31 18:05:12 +03:00
Luca Coelho ab27926d9e iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modules
The devices with PCI device ID 0x34F0 are part of the SoC and can be
combined with some different external RF modules.  The configuration
for these devices should reflect that, but are currently mixed up.  To
avoid confusion with discrete devices, add part of the firmware to be
used and the official name of the device to the cfg structs.

This is least reorganization possible (without messing things even
more) that could be done as a bugfix for this SoC.  Further
reorganization of this code will be done separately.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:42 +03:00
Johannes Berg ea7c2bfdec Revert "iwlwifi: allow memory debug TLV to specify the memory type"
This reverts the addition of memory type in the memory debug TLV
as the firmware never ended up implementing it, and now the PRPH
dump is added as a different TLV.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:42 +03:00
Ayala Beker 930ab73c37 iwlwifi: mvm: activate fragmented EBS in case of fragmented scan
In case of fragmented scan on the HB channels, configure EBS to be
fragmented as well.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:41 +03:00
Golan Ben Ami 1169310fa9 iwlwifi: refactor txq_alloc for supporting more command type
Support more txq_alloc command types by moving the command declaration
to the gen specific area.  While at it, move some of the code segments
to a common place for re-use.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:41 +03:00
Johannes Berg 764f9de502 iwlwifi: mvm: decode HE TB PPDU data
Decode the HE TB PPDU data that we get in sniffer mode
and use it to populate the HE radiotap information.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:40 +03:00
Naftali Goldstein 423584dd80 iwlwifi: rs-fw: support dcm
Add flags to the tlc_cfg_cmd for signaling peer support for receiving
Dual Carrier Modulation at BPSK (MCS 0), and set them according to peer
capabilities.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:40 +03:00
Naftali Goldstein 3e467b8e4c iwlwifi: rs-fw: enable STBC in he correctly
In the HE phy capabilities IE there are 2 bits to signal support for
STBC in bandwidths of 80Mhz or less, and of 160Mhz.
Use these bits to determine STBC support if this IE exists.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:39 +03:00
Shahar S Matityahu ae17404e38 iwlwifi: avoid code duplication in stopping fw debug data recording
Make all FW debug data stop recording flows to use
iwl_fw_dbg_stop_recording function instead of writing to FW
registers directly.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:39 +03:00
Shahar S Matityahu c5f97542aa iwlwifi: change monitor DMA to be coherent
Allow access to the memory by the host and the device simultaneously.
This will be needed in some future patches.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:38 +03:00
Naftali Goldstein 2859de7637 iwlwifi: mvm: always init rs_fw with 20MHz bandwidth rates
As with the non-offloaded rs case, during assoc on the ap side the phy
context is set to 20MHz until authorization of a client that supports
wider channel-widths. Support this by sending the initial
tlc_config_cmd with max supported channel width of 20MHz until
authorization succeeds.

Fixes: 6b7a5aea71 ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:38 +03:00
Emmanuel Grumbach 65c3b582ec iwlwifi: mvm: send BCAST management frames to the right station
Probe responses were sent to the multicast station while
they should be routed to the broadcast station.
This has no negative effect since the frame was still
routed to the right queue, but it looked very fishy
to send a frame to a (queue, station) tuple where
'queue' is not mapped to 'station'.

Fixes: 7c305de2b9 ("iwlwifi: mvm: Direct multicast frames to the correct station")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:37 +03:00
Ido Yariv 06c34dee07 iwlwifi: Add missing 11n disable module parameter check
In the new method of parsing the NVM the disable_11n module parameter
isn't consulted when setting up HT capabilities. Fix this.

Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:36 +03:00
Johannes Berg 317bc55fa8 iwlwifi: mvm: remove channel 2 from HE radiotap if not applicable
If the bandwidth is only 20 MHz, then the second channel doesn't
exist, but the hardware reports the CRC was OK. Suppress the data
of the second channel in the HE radiotap in this case, by marking
it as not known.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:36 +03:00
Johannes Berg 925bc2b189 iwlwifi: mvm: report # of LTF symbols for extended range SU PPDUs
This is the same as for SU PPDUs, so it's easy to do.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:35 +03:00
Johannes Berg 93cc712a79 iwlwifi: mvm: properly decode HE GI duration
The GI duration depends on the frame type in some cases,
take that into account when decoding for radiotap.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:35 +03:00
Johannes Berg de8da23060 iwlwifi: mvm: put LTF symbol size into HE radiotap
I evidently completely confused "number of LTF symbols" and "LTF size".
Radiotap was reporting the former, while I thought it was the latter,
and we really need both.

Add the LTF symbol size into the newly defined field in radiotap.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:34 +03:00
Johannes Berg dabf984438 iwlwifi: mvm: implement extended HE-MU sniffer API
Implement the extended HE-MU info type decoding to show the HE-SIG-B
common contents in the HE-MU radiotap field.

The DW4 data is partially overwritten by the hardware in all cases, so
only the higher 16 bits can be used.  To be able to use it for the HE
SIG-B common data anyway, move the bits around in the following way:

  SIG-B common 0: DW 4 -> DW 7
  SIG-B common 1: DW 7 -> DW 8
  SIG-B common 2: DW 8 -> DW 4 (upper half)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:34 +03:00
Luca Coelho 754f890a3a iwlwifi: remove all occurrences of the FSF address paragraph
The Free Software Foundation address is superfluous and causes
checkpatch to issue a warning when present.  Remove all paragraphs
with FSF's address to prevent that.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:33 +03:00
Sara Sharon e506b48164 iwlwifi: pcie: set interrupt coalescing also for gen2
We offloaded all the RX configuration of init to firmware. However,
the configuration of interrupt coalescing was left hanging - it wasn't
offloaded nor was it written by host.

This write to the CSR is allowed in gen2, so the host can do it.
Without it we have various issues with RX fullness.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:33 +03:00
Avraham Stern 3baf7528d6 iwlwifi: mvm: Send LQ command as async when necessary
The parameter that indicated whether the LQ command should be sent
as sync or async was removed, causing the LQ command to be sent as
sync from interrupt context (e.g. from the RX path). This resulted
in a kernel warning: "scheduling while atomic" and failing to send
the LQ command, which ultimately leads to a queue hang.

Fix it by adding back the required parameter to send the command as
sync only when it is allowed.

Fixes: d94c5a820d ("iwlwifi: mvm: open BA session only when sta is authorized")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:32 +03:00
Sara Sharon 1a19c139be iwlwifi: mvm: avoid sending too many BARs
When we receive TX response, we may release a few packets
due to a hole that was closed in the transmission window.

However, if that frame failed, we will mark all the released
frames as failed and will send multiple BARs.

This affects statistics badly, and cause unnecessary frames
transmission.

Instead, mark all the following packets as success, with the
desired result of sending a bar for the failed frame only.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:32 +03:00
Sara Sharon 941ab4eb66 iwlwifi: mvm: fix BAR seq ctrl reporting
There is a bug in FW where the sequence control may be
incorrect, and the driver overrides it with the value
of the ieee80211 header.

However, in BAR there is no sequence control in the header,
which result with arbitrary sequence.

This access to an unknown location is bad and it makes the
logs very confusing - so fix it.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:31 +03:00
Emmanuel Grumbach f60c9e591b iwlwifi: improve the flow when a NIC is disconnected
When the NIC is disconnected, we just can't do anything
besides seeking for help from the bus driver.  Dumping the
device's memory is not necessary and just bloats the logs
with unusable data.  Moreover, asking mac80211 to restart
the hardware is also useless.  Bypass all this.

Also, use the STATUS_TRANS_DEAD status bit instead of a
bool inside the transport layer. The advantage of this is
that now, the transport and the op_mode can know what is the
situation and bypass the useless recovery steps mentioned
above.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:31 +03:00
Erel Geron 50f067b356 iwlwifi: mvm: support Coex Schema 2
The new coex schema requires moving to SISO only when BT AG is 4.
Adjust the SISO criteria according to the coex schema version reported
by firmware.

Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:30 +03:00
Matt Chen 2b3fae668c iwlwifi: pcie: avoid unnecessary work if NIC is disconnected
When the NIC is disconnected from PCI bus, we are not
able to access it anymore. Check the status to avoid
some unnecessary work so can improve the performance.
It will help to make PCI bus rescan to bring back the
device much faster.

The real test is able to improve 7 seconds.

[w/o patch] It takes around 9 seconds
..
2018-04-20T01:22:39.691929-07:00 WARNING kernel:
[   66.335881] Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)
..
2018-04-20T01:22:48.101094-07:00 INFO kernel:
[   74.747364] iwlwifi 0000:01:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm

[w/a patch] It takes about 2 seconds.
..
2018-04-20T01:18:16.454087-07:00 WARNING kernel:
[   75.966860] Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)
..
2018-04-20T01:18:18.602717-07:00 INFO kernel:
[   78.116132] iwlwifi 0000:01:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
..

Fixes: 49564a806f ("iwlwifi: pcie: remove non-responsive device")
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:30 +03:00
Johannes Berg 84f260251e iwlwifi: don't WARN on trying to dump dead firmware
There's no point in warning here, the user will just get an
error back to the debugfs file write, and warning just makes
it seem like there's an internal consistency problem when in
reality the user just happened to hit this at a bad time.
Remove the warning.

Fixes: f45f979dc2 ("iwlwifi: mvm: disable dbg data collect when fw isn't alive")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:29 +03:00
Mordechay Goodstein 38bd7e58cf iwlwifi: add 80211 hdr offset to trace data
Every rx mpdu cmd is built from cmd_hdr | 80211_hdr.  The problem is
that the size of cmd_hdr changes with API changes and we don't know
where the 80211_hdr starts.

By adding the size of cmd_hdr dynamically, we can ensure that we always
know how to parse mpdu frames, without dependending on the API changes.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:29 +03:00
Golan Ben Ami b6fe27575a iwlwifi: pcie: make gen2 of apm_init non-static
This will allow using the same init in future generations.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:28 +03:00
Golan Ben Ami 9416560e41 iwlwifi: pcie: store the default rxq number
Store the default rxq number in a variable, so we won't need
to use the actual number in the code.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:28 +03:00
Haim Dreyfuss 0791c2fce3 iwlwifi: mvm: support new reduce tx power FW API.
Update reduce tx power command API to be compatible with new FW API.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:27 +03:00
Ayala Beker 4c2f445c0f iwlwifi: mvm: skip EBS in low latency mode while fragmented scan isn't supported
While associated in low latency mode, or when traffic load is high,
don't enable EBS in scan request if fragmented EBS is not supported
by the FW.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:26 +03:00
Golan Ben Ami 33bdccb71a iwlwifi: remove FSF's address from the license notice
The Free Software Foundation's address shouldn't be in the license
notice anymore, and some of our check scripts complain about it
(via checkpatch.pl).  Remove the address to silence it.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:26 +03:00
Johannes Berg 4290eaad7a iwlwifi: remove dump_regs() from transport ops
This is used only within PCIe, and there's no reason to go through
the transport methods for a function call within PCIe itself.
Remove the dump_regs() method and call the function directly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:25 +03:00
Golan Ben Ami 89d5e83353 iwlwifi: pcie: make non-static hcmd and rx code
Allow other device generations to use the utilities that
are used to send and reclaim host commands and to allocate
rx, by making it non-static.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:25 +03:00
Golan Ben Ami 9b3089bd82 iwlwifi: pcie: allow using tx init for other queues but the command queue
We would like to allow using tx init code for other queues but
the command queue - for newer devices.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:24 +03:00
Sara Sharon 7891965d74 iwlwifi: drop packets with bad status in CD
We need to drop packets with errors (such as replay,
MIC, ICV, conversion, duplicate and so on).

Drop invalid packets, put the status bits in the metadata and
move the enum definition to the correct place (FW API header).

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:24 +03:00
Mordechay Goodstein 75e9947ea4 iwlwifi: enable reading the value of delay in timestamp_marker cmd
The user can validate what was written to the file by reading it,
and check what is the default value before changing it.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:23 +03:00
Sara Sharon 4799ea53a5 iwlwifi: mvm: move he RX handling to a separate function
The HE code is bloating the RX handling, and makes it too big.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:22 +03:00
Sara Sharon c630b477ca iwlwifi: mvm: move he RX handling to a separate function
The HE code is bloating the RX handling, and makes it too big.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:22 +03:00
Liad Kaufman 621f3f5705 iwlwifi: mvm: add support for RX_AMPDU_EOF bit for HE SU
Current implementation turns this bit on only for HE MU.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:21 +03:00
Liad Kaufman bd6fc6552b iwlwifi: mvm: add bss color to radiotap
Add BSS color to the HE radiotap.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:21 +03:00
Golan Ben Ami 7d2bcc22cd iwlwifi: add required include to iwl-fh.h
Some variables are used in iwl-fh.h, but their type's definition
isn't included. This may break compilation when using the file
without including the necessary dependencies first.

Add the required include to iwl-fh.h.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:20 +03:00
Gregory Greenman 86e177d80f iwlwifi: mvm: add NOA and CSA to a probe response
A probe response built by a P2P GO should contain:
1. CSA/eCSA IE when relevant
2. If the corresponding probe request had P2P IE, then
need to add P2P IE with NOA attributes.

However, the NOA attributes and the updated channel switch
counter are known only to the FW. The solution is that FW
will send a notification with the relevant probe response
data and the driver will save it and update the probe
response accordingly.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:20 +03:00