Commit Graph

398 Commits

Author SHA1 Message Date
Vasily Gorbik 89b5202e81 s390/decompressor: support uncompressed kernel
Implement uncompressed kernel support (when "None" is picked in kernel
compression mode list). In that case an actual decompression code is
skipped and control is passed from boot/head.S to startup_continue in
kernel/head64.S. To achieve that uncompressed kernel payload is
conditionally put at 0x100000 in bzImage.

In reality this is very close to classic uncompressed kernel "image",
but the decompressor has its own build and link process,
kernel/head64.S lives at 0x100000 rather than at 0x11000, and .bss
section is reused for both stages.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-06-25 10:14:40 +02:00
Laurent Dufour 3010a5ea66 mm: introduce ARCH_HAS_PTE_SPECIAL
Currently the PTE special supports is turned on in per architecture
header files.  Most of the time, it is defined in
arch/*/include/asm/pgtable.h depending or not on some other per
architecture static definition.

This patch introduce a new configuration variable to manage this
directly in the Kconfig files.  It would later replace
__HAVE_ARCH_PTE_SPECIAL.

Here notes for some architecture where the definition of
__HAVE_ARCH_PTE_SPECIAL is not obvious:

arm
 __HAVE_ARCH_PTE_SPECIAL which is currently defined in
arch/arm/include/asm/pgtable-3level.h which is included by
arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.

powerpc
__HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
 - arch/powerpc/include/asm/book3s/64/pgtable.h
 - arch/powerpc/include/asm/pte-common.h
The first one is included if (PPC_BOOK3S & PPC64) while the second is
included in all the other cases.
So select ARCH_HAS_PTE_SPECIAL all the time.

sparc:
__HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
defined(__arch64__) which are defined through the compiler in
sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
So select ARCH_HAS_PTE_SPECIAL if SPARC64

There is no functional change introduced by this patch.

Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07 17:34:35 -07:00
Linus Torvalds 5037be168f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:

 - A rework for the s390 arch random code, the TRNG instruction is
   rather slow and should not be used on the interrupt path

 - A fix for a memory leak in the zcrypt driver

 - Changes to the early boot code to add a compile time check for code
   that may not use the .bss section, with the goal to avoid initrd
   corruptions

 - Add an interface to get the physical network ID (pnetid), this is
   useful to group network devices that are attached to the same network

 - Some cleanup for the linker script

 - Some code improvement for the dasd driver

 - Two fixes for the perf sampling support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: Fix CCA and EP11 CPRB processing failure memory leak.
  s390/archrandom: Rework arch random implementation.
  s390/net: add pnetid support
  s390/dasd: simplify locking in dasd_times_out
  s390/cio: add test for ccwgroup device
  s390/cio: add helper to query utility strings per given ccw device
  s390: remove no-op macro VMLINUX_SYMBOL()
  s390: remove closung punctuation from spectre messages
  s390: introduce compile time check for empty .bss section
  s390/early: move functions which may not access bss section to extra file
  s390/early: get rid of #ifdef CONFIG_BLK_DEV_INITRD
  s390/early: get rid of memmove_early
  s390/cpum_sf: Add data entry sizes to sampling trailer entry
  perf: fix invalid bit in diagnostic entry
2018-06-05 11:13:17 -07:00
Ursula Braun b6ef86e962 s390/net: add pnetid support
s390 hardware supports the definition of a so-call Physical NETwork
IDentifier (short PNETID) per network device port. These PNETIDS
can be used to identify network devices that are attached to the same
physical network (broadcast domain).

This patch provides the interface to extract the PNETID of a port of
a device attached to the ccw-bus or pci-bus.

Parts of this patch are based on an initial implementation by
Thomas Richter.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-30 11:18:03 +02:00
Christoph Hellwig 4965a68780 arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig
Define this symbol if the architecture either uses 64-bit pointers or the
PHYS_ADDR_T_64BIT is set.  This covers 95% of the old arch magic.  We only
need an additional select for Xen on ARM (why anyway?), and we now always
set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
instead of only doing it when highmem is set.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Hogan <jhogan@kernel.org>
2018-05-09 06:57:04 +02:00
Christoph Hellwig f616ab59c2 dma-mapping: move the NEED_DMA_MAP_STATE config symbol to lib/Kconfig
This way we have one central definition of it, and user can select it as
needed.  Note that we now also always select it when CONFIG_DMA_API_DEBUG
is select, which fixes some incorrect checks in a few network drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2018-05-09 06:56:08 +02:00
Christoph Hellwig 86596f0a28 scatterlist: move the NEED_SG_DMA_LENGTH config symbol to lib/Kconfig
This way we have one central definition of it, and user can select it as
needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2018-05-09 06:55:59 +02:00
Christoph Hellwig a4ce5a48d7 iommu-helper: move the IOMMU_HELPER config symbol to lib/
This way we have one central definition of it, and user can select it as
needed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2018-05-09 06:55:51 +02:00
Christoph Hellwig 6e88628d03 dma-debug: remove CONFIG_HAVE_DMA_API_DEBUG
There is no arch specific code required for dma-debug, so there is no
need to opt into the support either.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-05-08 13:03:43 +02:00
Heiko Carstens 451239eb3d s390: add support for IBM z14 Model ZR1
Just add the new machine type number to the two places that matter.

Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16 09:10:24 +02:00
Philipp Rudo bdea9f6f7a s390/Kconfig: Move kexec config options to "Processor type and features"
The config options for kexec are currently not under any menu directory. Up
until now this was not a problem as standard kexec is always compiled in
and thus does not create a menu entry. This changed when kexec_file_load
was enabled. Its config option requires a menu entry which, when added
beneath standard kexec option, appears on the main directory above "General
Setup". Thus move the whole block further down such that the entry in now
in "Processor type and features".

While at it also update the help text for kexec file.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16 09:10:23 +02:00
Philipp Rudo 71406883fd s390/kexec_file: Add kexec_file_load system call
This patch adds the kexec_file_load system call to s390 as well as the arch
specific functions common code requires to work. Loaders for the different
file types will be added later.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16 09:10:22 +02:00
Philipp Rudo 840798a1f5 s390/kexec_file: Add purgatory
The common code expects the architecture to have a purgatory that runs
between the two kernels. Add it now. For simplicity first skip crash
support.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-16 09:10:22 +02:00
Martin Schwidefsky d424986f1d s390: add sysfs attributes for spectre
Set CONFIG_GENERIC_CPU_VULNERABILITIES and provide the two functions
cpu_show_spectre_v1 and cpu_show_spectre_v2 to report the spectre
mitigations.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-28 08:38:26 +02:00
Martin Schwidefsky 6e179d6412 s390: add automatic detection of the spectre defense
Automatically decide between nobp vs. expolines if the spectre_v2=auto
kernel parameter is specified or CONFIG_EXPOLINE_AUTO=y is set.

The decision made at boot time due to CONFIG_EXPOLINE_AUTO=y being set
can be overruled with the nobp, nospec and spectre_v2 kernel parameters.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-03-28 08:38:24 +02:00
Ulf Magnusson 48973df8c9 s390/kconfig: Remove ARCH_WANTS_PROT_NUMA_PROT_NONE select
The ARCH_WANTS_PROT_NUMA_PROT_NONE symbol was removed by
commit 6a33979d5b ("mm: remove misleading ARCH_USES_NUMA_PROT_NONE"),
but S390 still selects it.

Remove the ARCH_WANTS_PROT_NUMA_PROT_NONE select from the S390 symbol.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-08 07:07:44 +01:00
Martin Schwidefsky f19fbd5ed6 s390: introduce execute-trampolines for branches
Add CONFIG_EXPOLINE to enable the use of the new -mindirect-branch= and
-mfunction_return= compiler options to create a kernel fortified against
the specte v2 attack.

With CONFIG_EXPOLINE=y all indirect branches will be issued with an
execute type instruction. For z10 or newer the EXRL instruction will
be used, for older machines the EX instruction. The typical indirect
call

	basr	%r14,%r1

is replaced with a PC relative call to a new thunk

	brasl	%r14,__s390x_indirect_jump_r1

The thunk contains the EXRL/EX instruction to the indirect branch

__s390x_indirect_jump_r1:
	exrl	0,0f
	j	.
0:	br	%r1

The detour via the execute type instruction has a performance impact.
To get rid of the detour the new kernel parameter "nospectre_v2" and
"spectre_v2=[on,off,auto]" can be used. If the parameter is specified
the kernel and module code will be patched at runtime.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-07 15:57:02 +01:00
Martin Schwidefsky d768bd892f s390: add options to change branch prediction behaviour for the kernel
Add the PPA instruction to the system entry and exit path to switch
the kernel to a different branch prediction behaviour. The instructions
are added via CPU alternatives and can be disabled with the "nospec"
or the "nobp=0" kernel parameter. If the default behaviour selected
with CONFIG_KERNEL_NOBP is set to "n" then the "nobp=1" parameter can be
used to enable the changed kernel branch prediction.

Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-05 13:49:17 +01:00
Pavel Tatashin 2e3ca40f03 mm: relax deferred struct page requirements
There is no need to have ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT, as all
the page initialization code is in common code.

Also, there is no need to depend on MEMORY_HOTPLUG, as initialization
code does not really use hotplug memory functionality.  So, we can
remove this requirement as well.

This patch allows to use deferred struct page initialization on all
platforms with memblock allocator.

Tested on x86, arm64, and sparc.  Also, verified that code compiles on
PPC with CONFIG_MEMORY_HOTPLUG disabled.

Link: http://lkml.kernel.org/r/20171117014601.31606-1-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>	[s390]
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31 17:18:36 -08:00
Christoph Hellwig 002e67454f dma-direct: rename dma_noop to dma_direct
The trivial direct mapping implementation already does a virtual to
physical translation which isn't strictly a noop, and will soon learn
to do non-direct but linear physical to dma translations through the
device offset and a few small tricks.  Rename it to a better fitting
name.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
2018-01-15 09:35:06 +01:00
Heiko Carstens c33eff6005 s390/perf: add perf_regs support and user stack dump
Add s390 support to dump user stack to user space for DWARF
stack unwinding.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-16 15:06:11 +01:00
Heiko Carstens 049a2c2d48 s390: enable CPU alternatives unconditionally
Remove the CPU_ALTERNATIVES config option and enable the code
unconditionally. The config option was only added to avoid a conflict
with the named saved segment support. Since that code is gone there is
no reason to keep the CPU_ALTERNATIVES config option.

Just enable it unconditionally to also reduce the number of config
options and make it less likely that something breaks.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-11-14 22:08:12 +01:00
Vasily Gorbik dfd4c4935d s390/kbuild: get rid of a warning when compiling with KCOV
This change fixes the following warning:
warning: (KCOV) selects GCC_PLUGINS which has unmet direct dependencies
(HAVE_GCC_PLUGINS && !COMPILE_TEST)

Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-11-14 11:01:55 +01:00
Linus Torvalds d60a540ac5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
 "Since Martin is on vacation you get the s390 pull request for the
  v4.15 merge window this time from me.

  Besides a lot of cleanups and bug fixes these are the most important
  changes:

   - a new regset for runtime instrumentation registers

   - hardware accelerated AES-GCM support for the aes_s390 module

   - support for the new CEX6S crypto cards

   - support for FORTIFY_SOURCE

   - addition of missing z13 and new z14 instructions to the in-kernel
     disassembler

   - generate opcode tables for the in-kernel disassembler out of a
     simple text file instead of having to manually maintain those
     tables

   - fast memset16, memset32 and memset64 implementations

   - removal of named saved segment support

   - hardware counter support for z14

   - queued spinlocks and queued rwlocks implementations for s390

   - use the stack_depth tracking feature for s390 BPF JIT

   - a new s390_sthyi system call which emulates the sthyi (store
     hypervisor information) instruction

   - removal of the old KVM virtio transport

   - an s390 specific CPU alternatives implementation which is used in
     the new spinlock code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
  MAINTAINERS: add virtio-ccw.h to virtio/s390 section
  s390/noexec: execute kexec datamover without DAT
  s390: fix transactional execution control register handling
  s390/bpf: take advantage of stack_depth tracking
  s390: simplify transactional execution elf hwcap handling
  s390/zcrypt: Rework struct ap_qact_ap_info.
  s390/virtio: remove unused header file kvm_virtio.h
  s390: avoid undefined behaviour
  s390/disassembler: generate opcode tables from text file
  s390/disassembler: remove insn_to_mnemonic()
  s390/dasd: avoid calling do_gettimeofday()
  s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
  s390: remove named saved segment support
  s390/archrandom: Reconsider s390 arch random implementation
  s390/pci: do not require AIS facility
  s390/qdio: sanitize put_indicator
  s390/qdio: use atomic_cmpxchg
  s390/nmi: avoid using long-displacement facility
  s390: pass endianness info to sparse
  s390/decompressor: remove informational messages
  ...
2017-11-13 11:47:01 -08:00
Heiko Carstens 978fa72e82 s390: remove named saved segment support
Remove the support to create a z/VM named saved segment (NSS). This
feature is not supported since quite a while in favour of jump labels,
function tracing and (now) CPU alternatives. All of these features
require to write to the kernel text section which is not possible if
the kernel is contained within an NSS.

Given that memory savings are minimal if kernel images are shared and
in addition updates of shared images are painful, the NSS feature can
be removed.

Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-11-08 09:47:54 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Vasily Gorbik 686140a1a9 s390: introduce CPU alternatives
Implement CPU alternatives, which allows to optionally patch newer
instructions at runtime, based on CPU facilities availability.

A new kernel boot parameter "noaltinstr" disables patching.

Current implementation is derived from x86 alternatives. Although
ideal instructions padding (when altinstr is longer then oldinstr)
is added at compile time, and no oldinstr nops optimization has to be
done at runtime. Also couple of compile time sanity checks are done:
1. oldinstr and altinstr must be <= 254 bytes long,
2. oldinstr and altinstr must not have an odd length.

alternative(oldinstr, altinstr, facility);
alternative_2(oldinstr, altinstr1, facility1, altinstr2, facility2);

Both compile time and runtime padding consists of either 6/4/2 bytes nop
or a jump (brcl) + 2 bytes nop filler if padding is longer then 6 bytes.

.altinstructions and .altinstr_replacement sections are part of
__init_begin : __init_end region and are freed after initialization.

Signed-off-by: Vasily Gorbik <gor@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-10-18 14:11:29 +02:00
Thomas Huth 7fb2b2d512 s390/virtio: remove the old KVM virtio transport
There is no recent user space application available anymore which still
supports this old virtio transport. Additionally, commit 3b2fbb3f06
("virtio/s390: deprecate old transport") introduced a deprecation message
in the driver, and apparently nobody complained so far that it is still
required. So let's simply remove it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-29 15:51:35 +02:00
Heiko Carstens 79962038df s390: add support for FORTIFY_SOURCE
This is the quite trivial backend for s390 which is required to enable
FORTIFY_SOURCE support.

See commit 6974f0c455 ("include/linux/string.h: add the option of
fortified string.h functions") for more details.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:40 +02:00
Heiko Carstens 59a19ea9a0 s390: get rid of exit_thread()
exit_thread() is empty now. Therefore remove it and get rid of a
pointless branch.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28 07:29:40 +02:00
Martin Schwidefsky 6997c32365 s390: add support for IBM z14 machines
Add detection for machine type 0x3906 and set the ELF platform name
to z14. Add the miscellaneous-instruction-extension 2 facility to
the list of facilities for z14.

And allow to generate code that only runs on a z14 machine.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-07-26 08:25:15 +02:00
Aneesh Kumar K.V e1073d1e79 mm/hugetlb: clean up ARCH_HAS_GIGANTIC_PAGE
This moves the #ifdef in C code to a Kconfig dependency.  Also we move
the gigantic_page_supported() function to be arch specific.

This allows architectures to conditionally enable runtime allocation of
gigantic huge page.  Architectures like ppc64 supports different
gigantic huge page size (16G and 1G) based on the translation mode
selected.  This provides an opportunity for ppc64 to enable runtime
allocation only w.r.t 1G hugepage.

No functional change in this patch.

Link: http://lkml.kernel.org/r/1494995292-4443-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:33 -07:00
Linus Torvalds e0f3e8f14d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The bulk of the s390 patches for 4.13. Some new things but mostly bug
  fixes and cleanups. Noteworthy changes:

   - The SCM block driver is converted to blk-mq

   - Switch s390 to 5 level page tables. The virtual address space for a
     user space process can now have up to 16EB-4KB.

   - Introduce a ELF phdr flag for qemu to avoid the global
     vm.alloc_pgste which forces all processes to large page tables

   - A couple of PCI improvements to improve error recovery

   - Included is the merge of the base support for proper machine checks
     for KVM"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
  s390/dasd: Fix faulty ENODEV for RO sysfs attribute
  s390/pci: recognize name clashes with uids
  s390/pci: provide more debug information
  s390/pci: fix handling of PEC 306
  s390/pci: improve pci hotplug
  s390/pci: introduce clp_get_state
  s390/pci: improve error handling during fmb (de)registration
  s390/pci: improve unreg_ioat error handling
  s390/pci: improve error handling during interrupt deregistration
  s390/pci: don't cleanup in arch_setup_msi_irqs
  KVM: s390: Backup the guest's machine check info
  s390/nmi: s390: New low level handling for machine check happening in guest
  s390/fpu: export save_fpu_regs for all configs
  s390/kvm: avoid global config of vm.alloc_pgste=1
  s390: rename struct psw_bits members
  s390: rename psw_bits enums
  s390/mm: use correct address space when enabling DAT
  s390/cio: introduce io_subchannel_type
  s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL
  s390/dumpstack: remove raw stack dump
  ...
2017-07-03 15:39:36 -07:00
Martin Schwidefsky 23fefe119c s390/kvm: avoid global config of vm.alloc_pgste=1
The system control vm.alloc_pgste is used to control the size of the
page tables, either 2K or 4K. The idea is that a KVM host sets the
vm.alloc_pgste control to 1 which causes *all* new processes to run
with 4K page tables. For a non-kvm system the control should stay off
to save on memory used for page tables.

Trouble is that distributions choose to set the control globally to
be able to run KVM guests. This wastes memory on non-KVM systems.

Introduce the PT_S390_PGSTE ELF segment type to "mark" the qemu
executable with it. All executables with this (empty) segment in
its ELF phdr array will be started with 4K page tables. Any executable
without PT_S390_PGSTE will run with the default 2K page tables.

This removes the need to set vm.alloc_pgste=1 for a KVM host and
minimizes the waste of memory for page tables.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-06-13 13:03:41 +02:00
Martin Schwidefsky 1aea9b3f92 s390/mm: implement 5 level pages tables
Add the logic to upgrade the page table for a 64-bit process to
five levels. This increases the TASK_SIZE from 8PB to 16EB-4K.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-06-12 16:25:54 +02:00
Bilal Amarni 47b2c3fff4 security/keys: add CONFIG_KEYS_COMPAT to Kconfig
CONFIG_KEYS_COMPAT is defined in arch-specific Kconfigs and is missing for
several 64-bit architectures : mips, parisc, tile.

At the moment and for those architectures, calling in 32-bit userspace the
keyctl syscall would return an ENOSYS error.

This patch moves the CONFIG_KEYS_COMPAT option to security/keys/Kconfig, to
make sure the compatibility wrapper is registered by default for any 64-bit
architecture as long as it is configured with CONFIG_COMPAT.

[DH: Modified to remove arm64 compat enablement also as requested by Eric
 Biggers]

Signed-off-by: Bilal Amarni <bilal.amarni@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
cc: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09 13:29:45 +10:00
Linus Torvalds b68e7e952f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:

 - three merges for KVM/s390 with changes for vfio-ccw and cpacf. The
   patches are included in the KVM tree as well, let git sort it out.

 - add the new 'trng' random number generator

 - provide the secure key verification API for the pkey interface

 - introduce the z13 cpu counters to perf

 - add a new system call to set up the guarded storage facility

 - simplify TASK_SIZE and arch_get_unmapped_area

 - export the raw STSI data related to CPU topology to user space

 - ... and the usual churn of bug-fixes and cleanups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
  s390/crypt: use the correct module alias for paes_s390.
  s390/cpacf: Introduce kma instruction
  s390/cpacf: query instructions use unique parameters for compatibility with KMA
  s390/trng: Introduce s390 TRNG device driver.
  s390/crypto: Provide s390 specific arch random functionality.
  s390/crypto: Add new subfunctions to the cpacf PRNO function.
  s390/crypto: Renaming PPNO to PRNO.
  s390/pageattr: avoid unnecessary page table splitting
  s390/mm: simplify arch_get_unmapped_area[_topdown]
  s390/mm: make TASK_SIZE independent from the number of page table levels
  s390/gs: add regset for the guarded storage broadcast control block
  s390/kvm: Add use_cmma field to mm_context_t
  s390/kvm: Add PGSTE manipulation functions
  vfio: ccw: improve error handling for vfio_ccw_mdev_remove
  vfio: ccw: remove unnecessary NULL checks of a pointer
  s390/spinlock: remove compare and delay instruction
  s390/spinlock: use atomic primitives for spinlocks
  s390/cpumf: simplify detection of guest samples
  s390/pci: remove forward declaration
  s390/pci: increase the PCI_NR_FUNCTIONS default
  ...
2017-05-02 09:50:09 -07:00
Al Viro 2fefc97b21 HAVE_ARCH_HARDENED_USERCOPY is unconditional now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26 12:11:06 -04:00
Al Viro 701cac61d0 CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
all architectures converted

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26 12:11:01 -04:00
Harald Freudenberger 4c637cd8de s390/crypto: Provide s390 specific arch random functionality.
This patch introduces s390 specific arch random functionality.
There exists a generic kernel API for arch specific random
number implementation (see include/linux/random.h). Here
comes the header file and a very small static code part
implementing the arch_random_* API based on the TRNG
subfunction coming with the reworked PRNG instruction.

The arch random implementation hooks into the kernel
initialization and checks for availability of the TRNG
function. In accordance to the arch random API all functions
return false if the TRNG is not available. Otherwise the new
high quality entropy source provides fresh random on each
invocation.

The s390 arch random feature build is controlled via
CONFIG_ARCH_RANDOM. This config option located in
arch/s390/Kconfig is enabled by default and appears
as entry "s390 architectural random number generation API"
in the submenu "Processor type and features" for s390 builds.

Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-26 13:41:35 +02:00
Sebastian Ott b18601b076 s390/pci: increase the PCI_NR_FUNCTIONS default
Users complained that they are hitting the limit of 64 functions (some
physical functions can spawn lots of virtual functions). Double the
default limit. With the latest savings in static data usage this
increases the image size by only 520 bytes.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-05 07:35:23 +02:00
Martin Schwidefsky 6fb81d69d0 Merge branch 'vfio-ccw-for-martin' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features
Pull vfio-ccw branch to add the basic channel I/O passthrough
intrastructure based on vfio.

The focus is on supporting dasd-eckd(cu_type/dev_type = 0x3990/0x3390)
as the target device.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-31 13:01:46 +02:00
Dong Jia Shi 84cd8fc484 vfio: ccw: register vfio_ccw to the mediated device framework
To make vfio support subchannel devices, we need to leverage the
mediated device framework to create a mediated device for the
subchannel device.

This registers the subchannel device to the mediated device
framework during probe to enable mediated device creation.

Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-7-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-03-31 12:55:06 +02:00
Dong Jia Shi 63f1934d56 vfio: ccw: basic implementation for vfio_ccw driver
To make vfio support subchannel devices, we need a css driver for
the vfio subchannels. This patch adds a basic vfio-ccw subchannel
driver for this purpose.

To enable VFIO for vfio-ccw, enable S390_CCW_IOMMU config option
and configure VFIO as required.

Acked-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20170317031743.40128-5-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-03-31 12:55:04 +02:00
Al Viro 37096003c8 s390: get rid of zeroing, switch to RAW_COPY_USER
[folded a fix from Martin]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-30 10:47:28 -04:00
Heiko Carstens b8402b957d s390: make MAX_PHYSMEM_BITS configurable
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:55:10 +02:00
Heiko Carstens fd15a1f333 s390: enable ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
Deferred struct page initialization works on s390. However it makes
only sense for the fake numa case, since the kthreads that initialize
struct pages are started per node. Without fake numa there is just a
single node and therefore no gain.
However there is no reason to not enable this feature. Therefore
select the config option and enable the feature in all config files.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:32 +02:00
Heiko Carstens 59cea29a34 s390: remove HAVE_ARCH_EARLY_PFN_TO_NID select statement
HAVE_ARCH_EARLY_PFN_TO_NID selects a not present Kconfig
option. Therefore remove it.
Given that the first call of early_pfn_to_nid() happens after
numa_setup() finished to establish the memory to node mapping, there
is no need to implement an architecture private version of
__early_pfn_to_nid() like (only) ia64 does.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-28 16:54:30 +02:00
Linus Torvalds 3f5595e3d0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
 "Next to the usual bug fixes (including the TASK_SIZE fix), there is
  one larger crypto item. It allows to use protected keys with the
  in-kernel crypto API

  The protected key support has two parts, the pkey user space API to
  convert key formats and the paes crypto module that uses a protected
  key instead of a standard AES key"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: TASK_SIZE for kernel threads
  s390/crypt: Add protected key AES module
  s390/dasd: fix spelling mistake: "supportet" -> "supported"
  s390/pkey: Introduce pkey kernel module
  s390/zcrypt: export additional symbols
  s390/zcrypt: Rework CONFIG_ZCRYPT Kconfig text.
  s390/zcrypt: Cleanup leftover module code.
  s390/nmi: purge tlbs after control register validation
  s390/nmi: fix order of register validation
  s390/crypto: Add PCKMO inline function
  s390/zcrypt: Enable request count reset for cards and queues.
  s390/mm: use _SEGMENT_ENTRY_EMPTY in the code
  s390/chsc: Add exception handler for CHSC instruction
  s390: opt into HAVE_COPY_THREAD_TLS
  s390: restore address space when returning to user space
  s390: rename CIF_ASCE to CIF_ASCE_PRIMARY
2017-02-27 23:03:04 -08:00
Linus Torvalds ac1820fb28 This is a tree wide change and has been kept separate for that reason.
Bart Van Assche noted that the ib DMA mapping code was significantly
 similar enough to the core DMA mapping code that with a few changes
 it was possible to remove the IB DMA mapping code entirely and
 switch the RDMA stack to use the core DMA mapping code.  This resulted
 in a nice set of cleanups, but touched the entire tree.  This branch
 will be submitted separately to Linus at the end of the merge window
 as per normal practice for tree wide changes like this.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9
 2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV
 CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD
 Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ
 xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX
 0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy
 1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw
 ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI
 IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG
 ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC
 XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS
 3e7mgpcwC+3XfA/6vU3F
 =e0Si
 -----END PGP SIGNATURE-----

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...
2017-02-25 13:45:43 -08:00