Fix up those functions that depend on knowing whether or not
rpc_restart_call is successful or not.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no real reason to have RPC_ASSASSINATED() checks in the NFS code.
As far as it is concerned, this is just an RPC error...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In RFC5661, an NFS4ERR_DELAY error on a SEQUENCE operation has the special
meaning that the server is not finished processing the request. In this
case we want to just retry the request without touching the slot.
Also fix a bug whereby we would fail to update the sequence id if the
server returned any error other than NFS_OK/NFS4ERR_DELAY.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
flock locks want to be labelled using the process pid, while posix locks
want to be labelled using the fl_owner.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is needed by NFSv4.0 servers in order to keep the number of locking
stateids at a manageable level.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The 'so_delegations' list appears to be unused.
Also eliminate so_client. If we already have so_server, we can get to the
nfs_client structure.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no reason to change the nfs_client state every time we allocate a
new session. Move that line into nfs4_init_client_minor_version.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of testing if the nfs_client has a session, we should be testing if
the struct nfs4_sequence_res was set up with one.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In anticipation of the day when we have per-filesystem sessions, and also
in order to allow the session to change in the event of a filesystem
migration event.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Nobody uses the rpc_status parameter.
It is not obvious why we need the struct nfs_client argument either, when
we already have that information in the session.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Firstly, there is little point in first zeroing out the entire struct
nfs4_sequence_res, and then initialising all fields save one. Just
initialise the last field to zero...
Secondly, nfs41_setup_sequence() has only 2 possible return values: 0, or
-EAGAIN, so there is no 'terminate rpc task' case.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the call to rpc_call_async() fails, then the arguments will not be
freed, since there will be no call to nfs41_sequence_call_done
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We do not want to have the state recovery thread kick off and wait for a
memory reclaim, since that may deadlock when the writebacks end up
waiting for the state recovery thread to complete.
The safe thing is therefore to use GFP_NOFS in all open, close,
delegation return, lock, etc. operations that may be called by the
state recovery thread.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I'm about to change task->tk_start from a jiffies value to a ktime_t
value in order to make RPC RTT reporting more precise.
Recently (commit dc96aef9) nfs4_renew_done() started to reference
task->tk_start so that a jiffies value no longer had to be passed
from nfs4_proc_async_renew(). This allowed the calldata to point to
an nfs_client instead.
Changing task->tk_start to a ktime_t value makes it effectively
useless for renew timestamps, so we need to restore the pre-dc96aef9
logic that provided a jiffies "start" timestamp to nfs4_renew_done().
Both an nfs_client pointer and a timestamp need to be passed to
nfs4_renew_done(), so create a new nfs_renewdata structure that
contains both, resembling what is already done for delegreturn,
lock, and unlock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the O_EXCL open handling into _nfs4_do_open() where it belongs. Doing
so also allows us to reuse the struct fattr from the opendata.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The original code passed an ERR_PTR() to rpc_put_task() and instead of
returning zero on success it returned -ENOMEM.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Arnaud Giersch reports that NFSv4 locking is broken when we hold a
delegation since commit 8e469ebd6d (NFSv4:
Don't allow posix locking against servers that don't support it).
According to Arnaud, the lock succeeds the first time he opens the file
(since we cannot do a delegated open) but then fails after we start using
delegated opens.
The following patch fixes it by ensuring that locking behaviour is
governed by a per-filesystem capability flag that is initially set, but
gets cleared if the server ever returns an OPEN without the
NFS4_OPEN_RESULT_LOCKTYPE_POSIX flag being set.
Reported-by: Arnaud Giersch <arnaud.giersch@iut-bm.univ-fcomte.fr>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
If nfs atomic open implementation ends up doing open request from
->d_revalidate() codepath and gets an error from server, return that error
to caller explicitly and don't bother with lookup_instantiate_filp() at all.
->d_revalidate() can return an error itself just fine...
See
http://bugzilla.kernel.org/show_bug.cgi?id=15674http://marc.info/?l=linux-kernel&m=126988782722711&w=2
for original report.
Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
I'll admit that it's unlikely for the first allocation to fail and
the second one to succeed. I won't be offended if you ignore this
patch.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
renewd sends RENEW requests to the NFS server in order to renew state.
As the request is asynchronous, renewd should take a reference to the
nfs_client to prevent concurrent umounts from freeing the client
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
renewd sends SEQUENCE requests to the NFS server in order to renew state.
As the request is asynchronous, renewd should take a reference to the
nfs_client to prevent concurrent umounts from freeing the session/client
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the renewd send queue gets backlogged (e.g., if the server goes down),
we will keep filling the queue with periodic RENEW/SEQUENCE requests.
This patch schedules a new renewd request if and only if the previous one
returns (either success or failure)
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
[Trond.Myklebust@netapp.com: moved nfs4_schedule_state_renewal() into
separate nfs4_renew_release() and nfs41_sequence_release() callbacks
to ensure correct behaviour on call setup failure]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When session is reset, client can renegotiate slot table size.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For the CREATE_SESSION attribute ca_maxresponsesize_cached, calculate
the value based on the rpc reply header size plus the maximum nfs compound
reply size.
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If a KRB5 TGT ticket expires, we don't want to return an error
immediatel. If someone has a long running job and just forgets to run
"kinit" in time then this will make it fail.
Instead, we want to treat this situation as we would NFS4ERR_DELAY and
retry the upcall after delaying a bit with an exponential backoff.
This patch just makes any place that would handle NFS4ERR_DELAY also
handle -EKEYEXPIRED the same way. In the future, we may want to be more
sophisticated however and handle hard vs. soft mounts differently, or
specify some upper limit on how long we'll wait for a new TGT to be
acquired.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Even if the server is crazy, we should be able to mark the stateid as being
bad, to ensure it gets recovered.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Currently, nfs4_handle_exception() will call it twice if called with an
error of -NFS4ERR_STALE_CLIENTID, -NFS4ERR_STALE_STATEID or
-NFS4ERR_EXPIRED.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
In most cases, we just want to mark the lock_stateid sequence id as being
uninitialised.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
If the CLOSE or OPEN_DOWNGRADE call triggers a state recovery, and has
to be resent, then we must release the seqid. Otherwise the open
recovery will wait for the close to finish, which causes a deadlock.
This is mainly a NFSv4.1 problem, although it can theoretically happen
with NFSv4.0 too, in a OPEN_DOWNGRADE situation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust