Commit Graph

164 Commits

Author SHA1 Message Date
Jani Nikula be26a66de5 drm/drm: constify all struct drm_*_helper funcs pointers
They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-07 18:11:25 +02:00
Daniel Stone 5a27528ade drm: crtc_helper: Update hwmode before mode_set call
Just as we provide crtc->mode pre-populated with the requested mode,
move adjusted_mode into hwmode before we call the crtc's mode_set,
making sure to restore it on failure.

Allows drivers which thoughtlessly discard adjusted_mode in their
mode_set hooks (e.g. Exynos) to use hwmode directly, and also provides
some neat symmetry with crtc->mode.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 16:22:30 +01:00
Rob Clark e3eb3250d8 drm: add support for tiled/compressed/etc modifier in addfb2
In DRM/KMS we are lacking a good way to deal with tiled/compressed
formats.  Especially in the case of dmabuf/prime buffer sharing, where
we cannot always rely on under-the-hood flags passed to driver specific
gem-create ioctl to pass around these extra flags.

The proposal is to add a per-plane format modifier.  This allows to, if
necessary, use different tiling patters for sub-sampled planes, etc.
The format modifiers are added at the end of the ioctl struct, so for
legacy userspace it will be zero padded.

v1: original
v1.5: increase modifier to 64b

v2: Incorporate review comments from the big thread, plus a few more.

- Add a getcap so that userspace doesn't have to jump through hoops.
- Allow modifiers only when a flag is set. That way drivers know when
  they're dealing with old userspace and need to fish out e.g. tiling
  from other information.
- After rolling out checks for ->modifier to all drivers I've decided
  that this is way too fragile and needs an explicit opt-in flag. So
  do that instead.
- Add a define (just for documentation really) for the "NONE"
  modifier. Imo we don't need to add mask #defines since drivers
  really should only do exact matches against values defined with
  fourcc_mod_code.
- Drop the Samsung tiling modifier on Rob's request since he's not yet
  sure whether that one is accurate.

v3:
- Also add a new ->modifier[] array to struct drm_framebuffer and fill
  it in drm_helper_mode_fill_fb_struct. Requested by Tvrkto Uruslin.
- Remove TODO in comment and add code comment that modifiers should be
  properly documented, requested by Rob.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Rob Clark <robdclark@gmail.com> (v1.5)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-13 23:28:12 +01:00
Daniel Vetter 07cc0ef67f drm/atomic: Introduce state->obj backpointers
Useful since this way we can pass around just the state objects and
will get ther real object, too.

Specifically this allows us to again simplify the parameters for
set_crtc_for_plane.

v2: msm already has it's own specific plane_reset hook, don't forget
that one!

v3: Fixup kerneldoc, reported by 0-day builder.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com> (v2)
Tested-by: Rob Clark <robdclark@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-12-17 20:23:23 +01:00
Daniel Vetter 321ebf04dc drm/atomic: Refcounting for plane_state->fb
So my original plan was that the drm core refcounts framebuffers like
with the legacy ioctls. But that doesn't work for a bunch of reasons:

- State objects might live longer than until the next fb change
  happens for a plane. For example delayed cleanup work only happens
  _after_ the pageflip ioctl has completed. So this definitely doesn't
  work without the plane state holding its own references.

- The other issue is transition from legacy to atomic implementations,
  where the driver works under a mix of both worlds. Which means
  legacy paths might not properly update the ->fb pointer under
  plane->state->fb. Which is a bit a problem when then someone comes
  around and _does_ try to clean it up when it's long gone.

The second issue is just a bit a transition bug, since drivers should
update plane->state->fb in all the paths that aren't converted yet.
But a bit more robustness for the transition can't hurt - we pull
similar tricks with cleaning up the old fb in the transitional helpers
already.

The pattern for drivers that transition is

	if (plane->state)
		drm_atomic_set_fb_for_plane(plane->state, plane->fb);

inserted after the fb update has logically completed at the end of
->set_config (or ->set_base/mode_set if using the crtc helpers),
->page_flip, ->update_plane or any other entry point which updates
plane->fb.

v2: Update kerneldoc - copypasta fail.

v3: Fix spelling in the commit message (Sean).

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-06 21:08:37 +01:00
Daniel Vetter 3150c7d0c6 drm: Docbook integration and over sections for all the new helpers
In all cases the text requires that new drivers are converted to the
atomic interfaces.

v2: Add overview for state handling.

v3: Review from Sean: Some spelling fixes and drop the misguided
hunk to remove rgba8888 from the plane helpers compat list.

Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-06 21:08:32 +01:00
Daniel Vetter 623369e533 drm: Atomic crtc/connector updates using crtc/plane helper interfaces
So this is finally the integration of the crtc and plane helper
interfaces into the atomic helper functions.

In the check function we now have a few steps:

- First we update the output routing and figure out which crtcs need a
  full mode set. Suitable encoders are selected using ->best_encoder,
  with the same semantics as the crtc helpers of implicitly disabling
  all connectors currently using the encoder.

- Then we pull all other connectors into the state update which feed
  from a crtc which changes. This must be done do catch mode changes
  and similar updates - atomic updates are differences on top of the
  current state.

- Then we call all the various ->mode_fixup to compute the adjusted
  mode. Note that here we have a slight semantic difference compared
  to the crtc helpers: We have not yet updated the encoder->crtc link
  when calling the encoder's ->mode_fixup function. But that's a
  requirement when converting to atomic since we want to prepare the
  entire state completely contained with the over drm_atomic_state
  structure. So this must be carefully checked when converting drivers
  over to atomic helpers.

- Finally we do call the atomic_check functions on planes and crtcs.

The commit function is also quite a beast:

- The only step that can fail is done first, namely pinning the
  framebuffers. After that we cross the point of no return, an async
  commit would push all that into the worker thread.

- The disabling of encoders and connectors is a bit tricky, since
  depending upon the final state we need to select different crtc
  helper functions.

- Software tracking is a bit clarified compared to the crtc helpers:
  We commit the software state before starting to touch the hardware,
  like crtc helpers. But since we just swap them we still have the old
  state (i.e. the current hw state) around, which is really handy to
  write simple disable functions. So no more
  drm_crtc_helper_disable_all_unused_functions kind of fun because
  we're leaving unused crtcs/encoders behind. Everything gets shut
  down in-order now, which is one of the key differences of the i915
  helpers compared to crtc helpers and a really nice additional
  guarantee.

- Like with the plane helpers the atomic commit function waits for one
  vblank to pass before calling the framebuffer cleanup function.

Compared to Rob's helper approach there's a bunch of upsides:

- All the interfaces which can fail are called in the ->check hook
  (i.e. ->best_match and the various ->mode_fixup hooks). This means
  that drivers can just reuse those functions and don't need to move
  everything into ->atomic_check callbacks. If drivers have no need
  for additional constraint checking beyong their existing crtc
  helper callbacks they don't need to do anything.

- The actual commit operation is properly stage: First we prepare
  framebuffers, which can potentially still fail (due to memory
  exhausting). This is important for the async case, where this must
  be done synchronously to correctly return errors.

- The output configuration changes (done with crtc helper functions)
  and the plane update (using atomic plane helpers) are correctly
  interleaved: First we shut down any crtcs that need changing, then
  we update planes and finally we enable everything again. Hardware
  without GO bits must be more careful with ordering, which this
  sequence enables.

- Also for hardware with shared output resources (like display PLLs)
  we first must shut down the old configuration before we can enable
  the new one. Otherwise we can hit an impossible intermediate state
  where there's not enough PLLs (which is the point behind atomic
  updates).

v2:
- Ensure that users of ->check update crtc_state->enable correctly.
- Update the legacy state in crtc/plane structures. Eventually we want
  to remove that, but for now the drm core still expects this (especially
  the plane->fb pointer).

v3: A few changes for better async handling:

- Reorder the software side state commit so that it happens all before
  we touch the hardware. This way async support becomes very easy
  since we can punt all the actual hw touching to a worker thread. And
  as long as we synchronize with that thread (flushing or cancelling,
  depending upon what the driver can handle) before we commit the next
  software state there's no need for any locking in the worker thread
  at all. Which greatly simplifies things.

  And as long as we synchronize with all relevant threads we can have
  a lot of them (e.g. per-crtc for per-crtc updates) running in
  parallel.

- Expose pre/post plane commit steps separately. We need to expose the
  actual hw commit step anyway for drivers to be able to implement
  asynchronous commit workers. But if we expose pre/post and plane
  commit steps individually we allow drivers to selectively use atomic
  helpers.

- I've forgotten to call encoder/bridge ->mode_set functions, fix
  this.

v4: Add debug output and fix a mixup between current and new state
that resulted in crtcs not getting updated correctly. And in an
Oops ...

v5:
- Be kind to driver writers in the vblank wait functions.. if thing
  aren't working yet, and vblank irq will never come, then let's not
  block forever.. especially under console-lock.
- Correctly clear connector_state->best_encoder when disabling.
  Spotted while trying to understand a report from Rob Clark.
- Only steal encoder if it actually changed, otherwise hilarity ensues
  if we steal from the current connector and so set the ->crtc pointer
  unexpectedly to NULL. Reported by Rob Clark.
- Bail out in disable_outputs if an output currently doesn't have a
  best_encoder - this means it's already disabled.

v6: Fixupe kerneldoc as reported by Paulo. And also fix up kerneldoc
in drm_crtc.h.

v7: Take ownership of the atomic state and clean it up with
drm_atomic_state_free().

v8 Various improvements all over:
- Polish code comments and kerneldoc.
- Improve debug output to make sure all failure cases are logged.
- Treat enabled crtc with no connectors as invalid input from userspace.
- Don't ignore the return value from mode_fixup().

v9:
- Improve debug output for crtc_state->mode_changed.

v10:
- Fixup the vblank waiting code to properly balance the vblank_get/put
  calls.
- Better comments when checking/computing crtc->mode_changed

v11: Fixup the encoder stealing logic: We can't look at encoder->crtc
since that's not in the atomic state structures and might be updated
asynchronously in and async commit. Instead we need to inspect all the
connector states and check whether the encoder is currently in used
and if so, on which crtc.

v12: Review from Sean:
- A few spelling fixes.
- Flatten control flow indent by converting if blocks to early
  continue/return in 2 places.
- Capture connectors_for_crtc return value in int num_connectors
  instead of bool has_connectors and do an explicit int->bool
  conversion with !!. I think the helper is more useful for drivers if
  it returns the number of connectors (e.g. to detect cloning
  configurations), so decided to keep that return value.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-06 21:02:14 +01:00
Daniel Vetter 2f324b42b7 drm/crtc-helper: Transitional functions using atomic plane helpers
These two functions allow drivers to reuse their atomic plane helpers
functions for the primary plane to implement the interfaces required
by the crtc helpers for the legacy ->set_config callback.

This is purely transitional and won't be used once the driver is fully
converted. But it allows partial conversions to the atomic plane
helpers which are functional.

v2:
- Use ->atomic_duplicate_state if available.
- Don't forget to run crtc_funcs->atomic_check.

v3: Shift source coordinates correctly for 16.16 fixed point.

v4: Don't forget to call ->atomic_destroy_state if available.

v5: Fixup kerneldoc.

v6: Reuse the plane_commit function from the transitional plane
helpers to avoid too much duplication.

v7:
- Remove some stale comment.
- Correctly handle the lack of plane->state object, necessary for
  transitional use.

v8: Fixup an embarrassing h/vdisplay mixup.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-05 18:44:59 +01:00
Fabien DESSENNE d980b1831c drm/crtc-helper: use drm_framebuffer flags
The "flags" parameter of the DRM_IOCTL_MODE_ADDFB2 ioctl must be
propagated and used by the driver.
The only possible value of flags is DRM_MODE_FB_INTERLACED.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Reviewed-by: Benjamin GAIGNARD <benjamin.gaignard@st.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08 11:18:47 +10:00
Dave Airlie 8d4ad9d4bb Merge commit '9e9a928eed8796a0a1aaed7e0b676db86ba84594' into drm-next
Merge drm-fixes into drm-next.

Both i915 and radeon need this done for later patches.

Conflicts:
	drivers/gpu/drm/drm_crtc_helper.c
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/i915/i915_gem.c
	drivers/gpu/drm/i915/i915_gem_execbuffer.c
	drivers/gpu/drm/i915/i915_gem_gtt.c
2014-06-05 20:28:59 +10:00
Rob Clark 51fd371bba drm: convert crtc and connection_mutex to ww_mutex (v5)
For atomic, it will be quite necessary to not need to care so much
about locking order.  And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.

Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.

Atomic will use this to keep track of which locks have been acquired
in a transaction.

v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-05 09:54:33 +10:00
Daniel Vetter 6e9f798d91 drm: Split connection_mutex out of mode_config.mutex (v3)
After the split-out of crtc locks from the big mode_config.mutex
there's still two major areas it protects:
- Various connector probe states, like connector->status, EDID
  properties, probed mode lists and similar information.
- The links from connector->encoder and encoder->crtc and other
  modeset-relevant connector state (e.g. properties which control the
  panel fitter).

The later is used by modeset operations. But they don't really care
about the former since it's allowed to e.g. enable a disconnected VGA
output or with a mode not in the probed list.

Thus far this hasn't been a problem, but for the atomic modeset
conversion Rob Clark needs to convert all modeset relevant locks into
w/w locks. This is required because the order of acquisition is
determined by how userspace supplies the atomic modeset data. This has
run into troubles in the detect path since the i915 load detect code
needs _both_ protections offered by the mode_config.mutex: It updates
probe state and it needs to change the modeset configuration to enable
the temporary load detect pipe.

The big deal here is that for the probe/detect users of this lock a
plain mutex fits best, but for atomic modesets we really want a w/w
mutex. To fix this lets split out a new connection_mutex lock for the
modeset relevant parts.

For simplicity I've decided to only add one additional lock for all
connector/encoder links and modeset configuration states. We have
piles of different modeset objects in addition to those (like bridges
or panels), so adding per-object locks would be much more effort.

Also, we're guaranteed (at least for now) to do a full modeset if we
need to acquire this lock. Which means that fine-grained locking is
fairly irrelevant compared to the amount of time the full modeset will
take.

I've done a full audit, and there's just a few things that justify
special focus:
- Locking in drm_sysfs.c is almost completely absent. We should
  sprinkle mode_config.connection_mutex over this file a bit, but
  since it already lacks mode_config.mutex this patch wont make the
  situation any worse. This is material for a follow-up patch.

- omap has a omap_framebuffer_flush function which walks the
  connector->encoder->crtc links and is called from many contexts.
  Some look like they don't acquire mode_config.mutex, so this is
  already racy. Again fixing this is material for a separate patch.

- The radeon hot_plug function to retrain DP links looks at
  connector->dpms. Currently this happens without any locking, so is
  already racy. I think radeon_hotplug_work_func should gain
  mutex_lock/unlock calls for the mode_config.connection_mutex.

- Same applies to i915's intel_dp_hot_plug. But again, this is already
  racy.

- i915 load_detect code needs to acquire this lock. Which means the
  w/w dance due to Rob's work will be nicely contained to _just_ this
  function.

I've added fixme comments everywhere where it looks suspicious but in
the sysfs code. After a quick irc discussion with Dave Airlie it
sounds like the lack of locking in there is due to sysfs cleanup fun
at module unload.

v1: original (only compile tested)

v2: missing mutex_init(), etc (from Rob Clark)

v3: i915 needs more care in the conversion:
- Protect the edp pp logic with the connection_mutex.
- Use connection_mutex in the backlight code due to
  get_pipe_from_connector.
- Use drm_modeset_lock_all in suspend/resume paths.
- Update lock checks in the overlay code.

Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-06-04 13:25:21 +10:00
Jani Nikula 83a8cfd3d7 drm: replace drm_get_encoder_name() with direct name field use
Generated using semantic patch:

@@
expression E;
@@

- drm_get_encoder_name(E)
+ E->name

Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-04 13:18:42 +10:00
Jani Nikula 259338205c drm: replace drm_get_connector_name() with direct name field use
Generated using semantic patch:

@@
expression E;
@@

- drm_get_connector_name(E)
+ E->name

[airlied: regenerated]

Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-04 13:17:41 +10:00
Sergei Antonov ba6f582606 drm/crtc-helper: skip locking checks in panicking path
Skip locking checks in drm_helper_*_in_use() if they are called in panicking
path. See similar code in drm_warn_on_modeset_not_all_locked().

After panic information has been output, these WARN_ONs go off outputing a lot
of lines and scrolling the panic information out of the screen. Here is a
partial call trace showing how execution reaches them:

? drm_helper_crtc_in_use()
? __drm_helper_disable_unused_functions()
? several *_set_config functions
? drm_fb_helper_restore_fbdev_mode()

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02 13:36:52 +10:00
Rob Clark b5e6c1dace drm: fix typo
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-26 12:48:26 +10:00
Thierry Reding a74591d781 drm: Make drm_crtc_helper_disable() return void
The function can never fail, and always returns 0, so it may just as
well not return anything.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-29 12:34:33 +02:00
Daniel Vetter 49d9ec1ca6 drm/crtc-helper: gc usless connector loop in disable_unused_functions
I've forgotten to clean this all up correctly in

commit e3d6ddb35f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Apr 1 22:15:00 2014 +0200

    drm/crtc-helper: don't disable disconnected outputs

Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-22 11:19:11 +02:00
Daniel Vetter 8d75454420 drm: Split out drm_probe_helper.c from drm_crtc_helper.c
This is leftover stuff from my previous doc round which I kinda wanted
to do but didn't yet due to rebase hell.

The modeset helpers and the probing helpers a independent and e.g.
i915 uses the probing stuff but has its own modeset infrastructure. It
hence makes to split this up. While at it add a DOC: comment for the
probing libraray.

It would be rather neat to pull some of the DocBook documenting these
two helpers into in-line DOC: comments. But unfortunately kerneldoc
doesn't support markdown or something similar to make nice-looking
documentation, so the current state is better.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-18 13:21:17 +10:00
Linus Torvalds e9f37d3a8d Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Highlights:

   - drm:

     Generic display port aux features, primary plane support, drm
     master management fixes, logging cleanups, enforced locking checks
     (instead of docs), documentation improvements, minor number
     handling cleanup, pseudofs for shared inodes.

   - ttm:

     add ability to allocate from both ends

   - i915:

     broadwell features, power domain and runtime pm, per-process
     address space infrastructure (not enabled)

   - msm:

     power management, hdmi audio support

   - nouveau:

     ongoing GPU fault recovery, initial maxwell support, random fixes

   - exynos:

     refactored driver to clean up a lot of abstraction, DP support
     moved into drm, LVDS bridge support added, parallel panel support

   - gma500:

     SGX MMU support, SGX irq handling, asle irq work fixes

   - radeon:

     video engine bringup, ring handling fixes, use dp aux helpers

   - vmwgfx:

     add rendernode support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
  DRM: armada: fix corruption while loading cursors
  drm/dp_helper: don't return EPROTO for defers (v2)
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
  Skip intel_crt_init for Dell XPS 8700
  ...
2014-04-08 09:52:16 -07:00
Dave Airlie 2844ea3f25 Merge branch 'primary-plane' of git://people.freedesktop.org/~robclark/linux into drm-next
Here's the latest iteration of the universal planes work, which I believe is
finally ready for merging.  Aside from the minor driver patches to use the
new drm_for_each_legacy_plane() macro for plane loops, these should all have
an r-b from Rob Clark now.

Actual userspace-visibility is currently hidden behind a
drm.universal_planes module parameter so that we can do some experimental
testing of this before flipping it on universally.

* 'primary-plane' of git://people.freedesktop.org/~robclark/linux:
  drm/doc: Update plane documentation and add plane helper library
  drm: Allow userspace to ask for universal plane list (v2)
  drm: Remove unused drm_crtc->fb
  drm: Replace crtc fb with primary plane fb (v3)
  drm/msm: Switch to universal plane API's
  drm: Add drm_crtc_init_with_planes() (v2)
  drm: Add plane type property (v2)
  drm: Add drm_universal_plane_init()
  drm: Add primary plane helpers (v3)
  drm: Make drm_crtc_check_viewport non-static
  drm/shmobile: Restrict plane loops to only operate on legacy planes
  drm/i915: Restrict plane loops to only operate on overlay planes (v2)
  drm/exynos: Restrict plane loops to only operate on overlay planes (v2)
  drm: Add support for multiple plane types (v2)
2014-04-02 12:09:09 +10:00
Daniel Vetter e3d6ddb35f drm/crtc-helper: don't disable disconnected outputs
This is the equivalent change in the crtc helpers as done to the i915
modeset infrastructure in

commit b0a2658acb
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 18 09:37:54 2012 +0100

    drm/i915: don't disable disconnected outputs

This was originally introduced to make encoder sharing on radone
easier for userspace, but:

- It is policy and as such belongs into userspace. E.g. personally I'm
  fairly annoyed that a flaky cable results in permanent changes of
  the desktop layout, so I'll kick out DEs which do this. Worse if the
  kernel also tries to be clever.

- It's inconsistent: We only kill disconnected outputs on setCrtc
  (which userspace might also call when just changing the
  framebuffer), but not when e.g. we receive a hpd event or in the
  output poll worker.

- It's unexpected behaviour for the userspace driver, at least in the
  intel ddx we've had tons of bugs where the driver fell over and
  killed the X session becuase pageflips/vblanks suddenly stopped
  working. We've had to fix this by wrapping every single setCrtc int
  a big "recover kms state from the kernel again" operation.

- It's suprising for the kernel, too: It took a few mails between Rob,
  Matt and me for them to notice that little dragon wreaking havoc
  with the universal plane framebuffer refcounting.

- Userspace can cope with it and e.g. Gnome already kills disconnected
  outputs and reconfigures the desktop automatically. And since there
  have been no regression reports for the i915 change from over 1 year
  ago I think all other DEs are also ready.

Note that the lines removed in this patch go back to

commit a3a0544b2c
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Aug 31 15:16:30 2009 +1000

    drm/kms: add explicit encoder disable function and detach harder.

Unfortunately the patch itself doesn't explain a hole lot about why it
was added ...

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-02 10:31:11 +10:00
Daniel Vetter 177cf92de4 drm/crtc-helpers: fix dpms on logic
This was introduced in

commit 25f397a429
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jul 19 18:57:11 2013 +0200

    drm/crtc-helper: explicit DPMS on after modeset

but due to a bit of rebase fail on my side the patch actually merged
put one hunk on the wrong side of a break statement. Fix this up.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-02 10:31:04 +10:00
Matt Roper f4510a2752 drm: Replace crtc fb with primary plane fb (v3)
Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC.  Replace all references to the CRTC fb with the
primary plane's fb.

This patch was generated by the Coccinelle semantic patching tool using
the following rules:

        @@ struct drm_crtc C; @@
        -   (C).fb
        +   C.primary->fb

        @@ struct drm_crtc *C; @@
        -   (C)->fb
        +   C->primary->fb

v3: Generate patch via coccinelle.  Actual removal of crtc->fb has been
    moved to a subsequent patch.

v2: Fixup several lingering crtc->fb instances that were missed in the
    first patch iteration.  [Rob Clark]

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-04-01 20:18:28 -04:00
Dave Airlie 3ea8785503 drm/helper: lock all around force mode restore
Since Daniel documented things with a sledge hammer, we got lots of
nice backtraces in suspend/resume operations, I've check the callers
of this and they all seems safe to me,

This fixes one set of warns I reported.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-22 08:05:32 +10:00
Daniel Vetter b182cc59a4 drm/crtc-helper: fix locking for drm_helper_disable_unused_functions
We have two calling contexts for thise function:

- In the crtc helper code itself as part of the ->set_config
  implementation. In this calling context all modeset locks are
  already held, as they should.

- In drivers not implementing fastboot before the fbdev/fbcon setup
  and initialization. This has been added for all drivers in

  commit 76a39dbfb2
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Sun Jan 20 23:12:54 2013 +0100

      drm/fb-helper: don't disable everything in initial_config

  In this calling context we do not hold any modeset locks since the
  immediately following call to initialize the fbev emulation grabs
  all these locks themselves.

- There are two exceptions to the above rule: shmob doesn't have fbdev
  emulation support. I've manually checked the callchain up to the
  driver load function and no kms locks are held.

The right fix therefore is to split this helper into an internal and
external version and add the required locking to the function exported
to drivers.

This remedies locking inconsistencies exposed by me adding locking
WARNs as part of the recent kerneldoc abi polishing done in

commit 62ff94a549
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 6395138505
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

v2: It helps when I actually git add the entire thing.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-22 08:03:19 +10:00
Daniel Vetter 3fcc42e07c drm: kerneldoc polish for drm_crtc_helper.c
Most of this is newly added kerneldoc for the hotplug and output
polling code. But I've also thrown in a bit lesser polish, most of it
is tuning down the shouting RETURN: headers.

Overview documentation for the output probing and mode setting support
code will be added in later patches.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:48 +01:00
Daniel Vetter 00d762cbd1 drm: drop error code for drm_helper_resume_force_mode
No driver cares, and it should generally work. Add a big comment
when drivers can't use this for recompense.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:48 +01:00
Daniel Vetter 62ff94a549 drm/crtc-helper: remove LOCKING from kerneldoc
- It yells.
- WARNing about incorrect locking is harder to ignore, so better
  than kerneldoc.
- Since those have been written per-crtc locks were added ...

So remove them and replace them by appropriate WARNs.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:47 +01:00
Daniel Vetter 9fd93784f1 drm: remove return value from drm_helper_mode_fill_fb_struct
Rightfully no driver ever checked this - it can't fail.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:46 +01:00
Daniel Vetter 3e70292cd4 drm/modes: drop maxPitch from drm_mode_validate_size
Totally unused and actually redundant with maxX for display mode
validation. The fb helper otoh needs to check pitch limits,
but that is delegated into drivers instead.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:43 +01:00
Daniel Vetter aa4cd9100e drm/doc: Document drm_helper_resume_force_mode
Stumbled over while reviewing all occurences in the DRM doc talking
about suspend/resume.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-03-13 12:48:31 +01:00
Jiri Kosina d4263348f7 Merge branch 'master' into for-next 2014-02-20 14:54:28 +01:00
Masanari Iida e227867f12 treewide: Fix typo in Documentation/DocBook
This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-19 14:58:17 +01:00
Dave Airlie 45ab1e0780 drm/tegra: Changes for v3.14-rc1 (update)
These patches fix some issues caused by the DRM panel support from the
 previous pull request and add two more panels (for the Toshiba AC100 as
 well as the Seaboard and Ventana).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4TK6AAoJEN0jrNd/PrOhwXoP/i09xa9CKOnpy8Ewdmgi5gBt
 vnjzqjwmHzZRpNeWw2xvcqzv5kKgXkpPdMhNUjErlJTUC1S6uCf/Uj+ExppYYysW
 7uxNjPQQc6jgX+0342MabKITeZyTk9iEWPqTDtHDP5O2vXi4XSaQTMm9HpWGe1qZ
 1CTb0yJc1epXGJPutlqhJSZgKwzrs6Pm2Q/nsTdxpGPAoTQj9J0NebDaZwJmmFGi
 qNyfI4DVBp1sj8AgtUkQQn9x5oLDpdvHKLPHsAWgHnNTKqRxY8C0EL+S2TYGa812
 sx8jvZgjvBoPuwaOr4hcOx91OFdfOoKVap9D/corU+UjstF9lTd+PvAHzZMO5qte
 yQhWmYFn1gGr/I9b9K/mAB98s83W7lMmSs/7HtiawvLtogZ/t8xvSp94R7X8SGd1
 wYcw3NqzgDxrcpJjDOsLIw1Pa4PxXoChtV0SfiaEoVlGn5WSONS/8cKeNwbO6e9D
 gKkd/zvCMsYqHt7p8zDizcQKi4W+8zYiZySOfLohZzhf0qaoQnnD5yirfiIpljqA
 Ql40F4XP3OF3CliikcSwFhvrTUCLb08Ol0MV6FX1H1iMae0dgiFqtz7AihFTbKHZ
 PQeskMgEemxhIqKEsH0JcpV3+YxLRlWy/3I+OO7QczsL0xKD30FQ9Xhsu9EFx8gu
 jXVvMDldeefaVBuTdqCb
 =NfNj
 -----END PGP SIGNATURE-----

Merge tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v3.14-rc1 (update)

These patches fix some issues caused by the DRM panel support from the
previous pull request and add two more panels (for the Toshiba AC100 as
well as the Seaboard and Ventana).

* tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: Obtain head number from DT
  drm/panel: update EDID BLOB in panel_simple_get_modes()
  gpu: host1x: Remove unnecessary include
  drm/tegra: Use proper data type
  drm/tegra: Clarify how panel modes override others
  drm/tegra: Fix possible CRTC mask for RGB outputs
  drm/i915: Use drm_encoder_crtc_ok()
  drm: Move drm_encoder_crtc_ok() to core
  drm: provide a helper for the encoder possible_crtcs mask
  drm/tegra: Don't check resource with devm_ioremap_resource()
  drm/panel: Add support for Chunghwa CLAA101WA01A panel
  drm/panel: Add support for Samsung LTN101NT05 panel
2014-01-29 12:03:56 +10:00
Ville Syrjälä 545cdd5510 drm: Pass the display mode to drm_calc_timestamping_constants()
We don't really use hwmode anymore in i915, so eliminating its use
from the core code seems prudent. Just pass the appropriate mode
to drm_calc_timestamping_constants().

Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2014-01-20 11:04:46 +02:00
Thierry Reding 3d88736870 drm: Move drm_encoder_crtc_ok() to core
Using the new drm_crtc_mask() function, drm_encoder_crtc_ok() can now be
written in a significantly shorter way, so it can be moved to a header
file and be made static inline.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-14 14:35:11 +01:00
Russell King db5f7a6e78 drm: provide a helper for the encoder possible_crtcs mask
The encoder possible_crtcs mask identifies which CRTCs can be bound to
a particular encoder.  Each bit from bit 0 defines an index in the list
of CRTCs held in the DRM mode_config crtc_list.  Rather than having
drivers trying to track the position of their CRTCs in the list, expose
the code which already exists for calculating the appropriate mask bit
for a CRTC.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[treding@nvidia.com: add drm_crtc_index(), move to core]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-01-14 14:35:02 +01:00
Ilija Hadzic 02ee4e9455 drm: eliminate bit-copy restoration of crtc
Bit-copying restoration of CRTC structure in failure-recovery
path of drm_crtc_helper_set_config function evokes a
subtle and rare, but very dangerous, corruption of
CRTC mutex structure.

Namely, if drm_crtc_helper_set_config takes the path under
'fail:' label *and* some other process has attempted to
grab the crtc mutex (and got blocked), restoring the CRTC
structure by bit-copying it will overwrite the CRTC mutex
state and the waiters list pointer within the mutex structure.
Consequently the blocked process will never be scheduled.

This patch fixes the issue by eliminating the bit-copy
restoration. The elimination is possible because previous
patches have cleaned up the resoration path so that only
the fields touched by the drm_crtc_helper_set_config function
are saved and restored if necessary.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 14:27:51 +10:00
Ilija Hadzic 48b1f5ddaa drm: do not set crtc enabled field twice
There is no need to set crtc->enabled field in
drm_crtc_helper_set_config. This is already done (and
properly restored in case of failure) in
drm_crtc_helper_set_mode that is called by
drm_crtc_helper_set_config. Doing it at only one
place makes restoration in case of failure easier.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 14:27:51 +10:00
Ilija Hadzic 7e99acdcab drm: fix error recovery path in drm_crtc_helper_set_mode
There is no need to save or restore hwmode field, because by
the time this function sets this field, it cannot fail any more.
However, we should save old enabled field because if
the function fails, we want to return with unchanged CRTC.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 14:27:50 +10:00
Ilija Hadzic fbce40641b drm: restore crtc origin if mode_set_base fails
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 14:27:50 +10:00
Ilija Hadzic bec2eac3a4 drm: eliminate old_fb from drm_crtc_helper_set_config
Old framebuffer is stored in save_set.fb and it is
the same value that is later stored in old_fb.
This makes old_fb redundant so we can replace
it with save_set.fb.

Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 14:27:50 +10:00
Ilija Hadzic fc50a890df drm: remove redundant if statement
Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06 14:27:49 +10:00
Dave Airlie 90c37067b7 drm/tegra: Changes for v3.13-rc1
The biggest part of the changes is the decoupling of the host1x and DRM
 drivers followed by the move of Tegra DRM back to drivers/gpu/drm/tegra
 from whence it came. There is a lot of cleanup as well, and the drivers
 can now be properly unloaded and reloaded.
 
 HDMI support for the Tegra114 SoC was contributed by Mikko Perttunen.
 
 gr2d support was extended to Tegra114 and the gr3d driver that has been
 in the works for quite some time finally made it in. All pieces to run
 an OpenGL driver on top of an upstream kernel are now available.
 
 Support for syncpoint bases was added by Arto Merilainen. This is useful
 for synchronizing between command streams from different engines such as
 gr2d and gr3d.
 
 Erik Faye-Lund and Wei Yongjun contributed various small fixes. Thanks!
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSch6LAAoJEN0jrNd/PrOhvYwP/ir8/pK0kWLdowfArmZqs1T7
 YhFy3zOCDkf2FKwNshsU8gwc8qeaCkP07LUBtjg+BvPdaHBQShLmwkNLKeV6tfLn
 A6gtCMkJG3l52PxoM9NtRIyq9Xot8Sv1H+PNSYjKgUDrIYNYkMhgG90+Aj409Qkw
 bbons3/CH58ufxY47wpGTFxhsiHX/9CSOlWl2RVfyzeyi5sVG+e+it3jsCl3ma9X
 lmCBJuZlaZsB1xy9kQaYobpL0BiNwhTOVeh0YmUQDBxFtIcY9j2h1dOCsh4o1sPp
 Aht/r8OaBxCu4ykAoGByaO/Bz6PQEaX1nW776edR1dusUBOupRjmyHcz1unq1Qpo
 PUI0zs823WrWX863FQcG+i71wdZDmRReGPduv+94H0IT6NtQEC2fT1eJdn2DtI0L
 GD3d8NR92hGdYVH01tEILlrT4Rrlemb0CWr+Vf6T3LwU44Jns/9X3UnG+GVE7IwT
 GreK0FjCTKeNZeMKGCJ0aKwjwEd7VMiFRiuEZfoemik8X3ib8f8oCeXIX1gD1ksz
 vGSaSjhx//X7/hco+1DSqdPOJnXd/ZUC0AkFQ0lIJ2mQvZfwHx55uE/AFjD1WE4/
 BNsTP+8C97IA/zAK241Ow+f1cLhRp1ZlgOVbFZp+EttKZ2vxRik/jV8MsBfhWJBX
 gIAXabh1MvhxagGaiFmb
 =qc03
 -----END PGP SIGNATURE-----

Merge tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v3.13-rc1

The biggest part of the changes is the decoupling of the host1x and DRM
drivers followed by the move of Tegra DRM back to drivers/gpu/drm/tegra
from whence it came. There is a lot of cleanup as well, and the drivers
can now be properly unloaded and reloaded.

HDMI support for the Tegra114 SoC was contributed by Mikko Perttunen.

gr2d support was extended to Tegra114 and the gr3d driver that has been
in the works for quite some time finally made it in. All pieces to run
an OpenGL driver on top of an upstream kernel are now available.

Support for syncpoint bases was added by Arto Merilainen. This is useful
for synchronizing between command streams from different engines such as
gr2d and gr3d.

Erik Faye-Lund and Wei Yongjun contributed various small fixes. Thanks!

* tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux: (45 commits)
  drm/tegra: Reserve syncpoint base for gr3d
  drm/tegra: Reserve base for gr2d
  drm/tegra: Deliver syncpoint base to user space
  gpu: host1x: Add syncpoint base support
  gpu: host1x: Add 'flags' field to syncpt request
  drm/tegra: Disable clock on probe failure
  gpu: host1x: Disable clock on probe failure
  drm/tegra: Support bottom-up buffer objects
  drm/tegra: Add support for tiled buffer objects
  drm/tegra: Add 3D support
  drm/tegra: Introduce tegra_drm_submit()
  drm/tegra: Use symbolic names for gr2d registers
  drm/tegra: Start connectors with correct DPMS mode
  drm/tegra: hdmi: Enable VDD earlier for hotplug/DDC
  drm/tegra: hdmi: Fix build warnings
  drm/tegra: hdmi: Detect DVI-only displays
  drm/tegra: Add Tegra114 HDMI support
  drm/tegra: hdmi: Parameterize based on compatible property
  drm/tegra: hdmi: Rename tegra{2,3} to tegra{20,30}
  gpu: host1x: Add support for Tegra114
  ...
2013-11-05 16:21:00 +10:00
Thierry Reding a6ad6230c1 drm: Track the proper DPMS mode of connectors
When userspace removes the active framebuffer using DRM_IOCTL_MODE_RMFB,
or explicitly disables the CRTC (by calling drmModeSetCrtc(..., NULL)
for example), a NULL framebuffer will be passed to the .set_config()
implementation of a CRTC. The drm_crtc_helper_set_config() helper will
decide to disable a CRTC when that happens.

To do so, it calls drm_crtc_helper_disable(), which in turn will iterate
over all encoders and decouple them from their connectors and finally
call drm_helper_disable_unused_functions() to clean up and call the
.disable() or .dpms() implementation for each encoder. However, at no
point during this sequence does it track the DPMS mode of a connector,
so it will usually remain on after this.

When a connector is enabled again, drm_helper_connector_dpms() will not
notice that the DPMS mode actually changed and won't do anything, which
causes the connector to stay disabled indefinitely.

To prevent this from happening, explicitly set the connector's DPMS mode
to off when the CRTC is disabled. That way it reflects the correct state
and can be enabled again.

This solves an issue observed when terminating an X server running on
the xf86-video-modesetting driver. Without this patch, the connector
would not be enabled properly and the screen would stay dark.

Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31 09:19:59 +01:00
Dave Airlie be51e4a781 Merge tag 'drm-intel-next-2013-10-18' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
- CRC support from Damien and He Shuang. Long term this should allow us to
  test an awful lot modesetting corner cases automatically. So for me as
  the maintainer this is really big.
- HDMI audio fix from Jani.
- VLV dpll computation code refactoring from Ville.
- Fixups for the gpu booster from last time around (Chris).
- Some cleanups in the context code from Ben.
- More watermark work from Ville (we'll be getting there ...).
- vblank timestamp improvements from Ville.
- CONFIG_FB=n support, including drm core changes to make the fbdev
  helpers optional.
- DP link training improvements (Jani).
- mmio vtable from Ben, prep work for future hw.

* tag 'drm-intel-next-2013-10-18' of git://people.freedesktop.org/~danvet/drm-intel: (132 commits)
  drm/i915/dp: don't mention eDP bpp clamping if it doesn't affect bpp
  drm/i915: remove dead code in ironlake_crtc_mode_set
  drm/i915: crc support for hsw
  drm/i915: fix CRC debugfs setup
  drm/i915: wait one vblank when disabling CRCs
  drm/i915: use ->get_vblank_counter for the crc frame counter
  drm/i915: wire up CRC interrupt for ilk/snb
  drm/i915: add CRC #defines for ilk/snb
  drm/i915: extract display_pipe_crc_update
  drm/i915: don't Oops in debugfs for I915_FBDEV=n
  drm/i915: set HDMI pixel clock in audio configuration
  drm/i915: pass mode to ELD write vfuncs
  cpufreq: Add dummy cpufreq_cpu_get/put for CONFIG_CPU_FREQ=n
  drm/i915: check gem bo size when creating framebuffers
  drm/i915: Use unsigned long for obj->user_pin_count
  drm/i915: prevent tiling changes on framebuffer backing storage
  drm/i915: grab dev->struct_mutex around framebuffer_init
  drm/i915: vlv: fix VGA hotplug after modeset
  drm: add support for additional stereo 3D modes
  drm/i915: preserve dispaly init order on ByT
  ...
2013-10-25 09:35:04 +01:00
Marc-André Lureau b8206d3916 drm: return if changed in drm_helper_hpd_irq_event()
The caller may want to know whether the configuration was changed, and
if an hotplug event was sent.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-23 14:21:07 +01:00
Daniel Vetter 92b6f89f6b drm: Add separate Kconfig option for fbdev helpers
For drivers which might want to disable fbdev legacy support.

Select the new option in all drivers for now, so this shouldn't result
in any change. Drivers need some work anyway to make fbdev support
optional (if they have it implemented, that is), so the recommended
way to expose this is by adding per-driver options. At least as long
as most drivers don't support disabling the fbdev support.

v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm
driver can already take advantage of this, which allows us to build
msm without any fbdev depencies in the kernel!

v3: Move the MODULE_* stuff from the fbdev helper file to
drm_crtc_helper.c.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-11 23:36:58 +02:00
Daniel Vetter 967ad7f148 Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next
The conflict in intel_drv.h tripped me up a bit since a patch in dinq
moves all the functions around, but another one in drm-next removes a
single function. So I'ev figured backing this into a backmerge would
be good.

i915_dma.c is just adjacent lines changed, nothing nefarious there.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/intel_drv.h

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-10 12:44:43 +02:00