The following Dell laptops are known to have been manufacturer by Compal
and are supported by the compal-laptop platform driver
- Mini 9
- Mini 10
- Mini 12
- Mini 10v
- Inspiron 11z
Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Set the backlight to use the current brightness when loaded, rather than
always resetting the backlight to maximum brightness.
Fixes kernel bugzilla #14207
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Reported-by: Denis Mukhin <denis_mukhin@yahoo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
sysfs_remove_group() removed the wrong attribute_group for
thermal_read_mode TPEC_8, ACPI_TMP07 and ACPI_UPDT
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_integer is now obsolete and removed from the ACPICA code base,
replaced by u64.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
CC [M] drivers/platform/x86/sony-laptop.o
drivers/platform/x86/sony-laptop.c: In function 'sony_nc_rfkill_setup':
drivers/platform/x86/sony-laptop.c:1162: warning: 'i' may be used uninitialized in this function
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Some new models need to disable wireless hotplug.
For the moment, we don't know excactly what models need that,
except 1005HA.
Users will be able to use that param as a workaround.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
This is a short term workaround for Eeepc 1005HA.
refs: <http://bugzilla.kernel.org/show_bug.cgi?id=14570>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The EeePC 4G ("701") implements CFVS, but it is not supported by the
pre-installed OS, and the original option to change it in the BIOS
setup screen was removed in later versions. Judging by the lack of
"Super Hybrid Engine" on Asus product pages, this applies to all "701"
models (4G/4G Surf/2G Surf).
So Asus made a deliberate decision not to support it on this model.
We have several reports that using it can cause the system to hang [1].
That said, it does not happen all the time. Some users do not
experience it at all (and apparently wish to continue "right-clocking").
Check for the EeePC 701 using DMI. If met, then disable writes to the
"cpufv" sysfs attribute and log an explanatory message.
Add a "cpufv_disabled" attribute which allow users to override this
policy. Writing to this attribute will log a second message.
The sysfs attribute is more useful than a module option, because it
makes it easier for userspace scripts to provide consistent behaviour
(according to user configuration), regardless of whether the kernel
includes this change.
[1] <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559578>
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 3e9b988e4e
"wmi: Free the allocated acpi objects through wmi_get_event_data"
had the same purpose as commit
44ef00e648
"hp-wmi: Fix two memleaks"
This should solve this regression:
http://bugzilla.kernel.org/show_bug.cgi?id=14890
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reported-by: Sedat Dilek <sedat.dilek@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It would appear that in BIOS's with nVidia hooks, the GUID
05901221-D566-11D1-B2F0-00A0C9062910 is duplicated. For now, the simplest
solution is to just ignore any duplicate GUIDs. These particular hooks are not
currently supported/ used in the kernel, so whoever does that can figure out
what the 'right' solution should be (if there's a better one).
http://bugzilla.kernel.org/show_bug.cgi?id=14846
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The commit 1fdd407f4e incorrectly made driver
abort loading when known GUID is present when it should have done exactly
the opposite.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER,
the caller must kfree the returned buffer if AE_OK is returned.
The callers of wmi_get_event_data() pass ACPI_ALLOCATE_BUFFER,
and thus must check its return value before accessing
or kfree() on the buffer.
Signed-off-by: Len Brown <len.brown@intel.com>
Emphasize that that wmi_install_notify_handler() returns an acpi_status
rather than -errno by by testing ACPI_SUCCESS(), ACPI_FAILURE().
No functional change in this patch, but this confusion caused a bug in dell-wmi.
Signed-off-by: Len Brown <len.brown@intel.com>
follow 0/-E convention
wmi_install_notify_handler() returns an acpi_error,
but dell_wmi_init() needs return a -errno style error.
Tested-by: Paul Rolland <rol@as2917.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Document that rfkill and ALSA functionality exists, but requires the
subsystems to be available, and not modular if thinkpad-acpi is not
modular.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Allow the user to choose through Kconfig if the Console Audio Control
interface (aka "volume subdriver") should be available or not.
This not only saves some memory, but also allows the thinkpad-acpi
driver to be built-in even if ALSA is modular when the console audio
control interface is not wanted.
This change fixes a build problem that is causing some annoyances, in
a way that doesn't disable the entire driver on kernels without ALSA
support.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Helight Xu <helight.xu@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
If we cannot create the ALSA mixer, it is a good reason to fail to
load the volume subdriver, and not to fail to load the entire module.
While at it, add more debugging messages, as the error paths are being
used a lot more than I'd expect, and it is failing to set up the ALSA
mixer on a number of ThinkPads.
Reported-by: Peter Jordan <usernetwork@gmx.info>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
We don't want to be the first soundcard. We don't want to shift other
soundcards out of the way either, even if they load much later.
Ask ALSA to (by default) load us in one of the last three slots. This
can be overriden at will using the "index" parameter.
Reported-by: Whoopie <whoopie79@gmx.net>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
The function that is executing in workqueue context does not need
to sleep so let's switch to a timer which is more lightweight.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Also use input_set_capability() helper instead of manipulating
bits directly.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
If we reschedule work instead of having work function sleep for 10 msecs
between reads from kfifo we can safely use the main workqueue (keventd)
and not bother with creating driver-private one.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
This add supports for devices like keyboard, backlight, tablet and
accelerometer.
This work is supported by International Syst S/A.
[randy.dunlap@oracle.com: cmpc_acpi: depends on ACPI]
[akpm@linux-foundation.org: readability tweaks]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Now that we have WMI autoloading
the DMI matching is not needed anymore.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
There is no point in having the driver loaded in memory if we fail
to locate particular WMI GUID.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
These function allocate an acpi object by calling wmi_get_event_data, which
then calls acpi_evaluate_object, and it is not freed afterwards.
And kernel doc is fixed for parameters of wmi_get_event_data.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
BIOS information is now checked whether it begins with the strings stored
in the BIOS table. Previous method did a strcmp, what lead to problems if
BIOS information has appended whitespaces.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Add new BIOS versions for following netbooks: Aspire 1810xx, Packard Bell
DOTMU.
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
BugLink: https://bugs.launchpad.net/ubuntu/+bug/435958
The module alias currently matches any Acer computer but when loaded the
BIOS checks will only succeed on Aspire One models. This causes a invalid
BIOS warning for all other models (seen on Aspire 4810T). This is not
fatal but worries users that see this message. Limiting the moule alias
to models starting with AOA or DOA for Packard Bell.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Peter Feuerer <peter@piie.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
SN06 makes sure we get back a longer buffer which seems to be necessary
going forward as the SNC devices describes more and more devices (or
features more precisely). Moreover SN06 should be called with only the
descriptor offset to make sure we hit the rfkill controlling function
(F124 or F135) with a 0 argument to get a full list of features.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Tested-by: Miguel Rodríguez Pérez <miguelrp@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Vaio Type X and possibly other new models use F135 as the radio
frequency controlling function attached to the SNC device. In the
indexed table this corresponds to 0x0135 (surpise!).
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix tests on return value from acpi_evaluate_integer(). Based on a patch by
Roel Kluin <roel.kluin@gmail.com> and incorporating suggestions from Len
Brown <lenb@kernel.org>.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
rename kfifo_put... into kfifo_in... to prevent miss use of old non in
kernel-tree drivers
ditto for kfifo_get... -> kfifo_out...
Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc
annotations more readable.
Add mini "howto porting to the new API" in kfifo.h
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the pointer to the spinlock out of struct kfifo. Most users in
tree do not actually use a spinlock, so the few exceptions now have to
call kfifo_{get,put}_locked, which takes an extra argument to a
spinlock.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a new generic kernel FIFO implementation.
The current kernel fifo API is not very widely used, because it has to
many constrains. Only 17 files in the current 2.6.31-rc5 used it.
FIFO's are like list's a very basic thing and a kfifo API which handles
the most use case would save a lot of development time and memory
resources.
I think this are the reasons why kfifo is not in use:
- The API is to simple, important functions are missing
- A fifo can be only allocated dynamically
- There is a requirement of a spinlock whether you need it or not
- There is no support for data records inside a fifo
So I decided to extend the kfifo in a more generic way without blowing up
the API to much. The new API has the following benefits:
- Generic usage: For kernel internal use and/or device driver.
- Provide an API for the most use case.
- Slim API: The whole API provides 25 functions.
- Linux style habit.
- DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros
- Direct copy_to_user from the fifo and copy_from_user into the fifo.
- The kfifo itself is an in place member of the using data structure, this save an
indirection access and does not waste the kernel allocator.
- Lockless access: if only one reader and one writer is active on the fifo,
which is the common use case, no additional locking is necessary.
- Remove spinlock - give the user the freedom of choice what kind of locking to use if
one is required.
- Ability to handle records. Three type of records are supported:
- Variable length records between 0-255 bytes, with a record size
field of 1 bytes.
- Variable length records between 0-65535 bytes, with a record size
field of 2 bytes.
- Fixed size records, which no record size field.
- Preserve memory resource.
- Performance!
- Easy to use!
This patch:
Since most users want to have the kfifo as part of another object,
reorganize the code to allow including struct kfifo in another data
structure. This requires changing the kfifo_alloc and kfifo_init
prototypes so that we pass an existing kfifo pointer into them. This
patch changes the implementation and all existing users.
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
net: fix for utsrelease.h moving to generated
gen_init_cpio: fixed fwrite warning
kbuild: fix make clean after mismerge
kbuild: generate modules.builtin
genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}()
score: add asm/asm-offsets.h wrapper
unifdef: update to upstream revision 1.190
kbuild: specify absolute paths for cscope
kbuild: create include/generated in silentoldconfig
scripts/package: deb-pkg: use fakeroot if available
scripts/package: add KBUILD_PKG_ROOTCMD variable
scripts/package: tar-pkg: use tar --owner=root
Kbuild: clean up marker
net: add net_tstamp.h to headers_install
kbuild: move utsrelease.h to include/generated
kbuild: move autoconf.h to include/generated
drop explicit include of autoconf.h
kbuild: move compile.h to include/generated
kbuild: drop include/asm
kbuild: do not check for include/asm-$ARCH
...
Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
Some models are equipped with an "AVMode" function key that sends
sony-laptop: Unknown event: 0x100 0xa1
sony-laptop: Unknown event: 0x100 0x21
for press and release respectively.
Cc: "Matthew W. S. Bell" <matthew@bells23.org.uk>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Any of the platform API functions can fail; driver should be prepared
to handle such failures. Also:
- changed to platform_driver_probe() since the device is created
right there with the driver;
- added __devexit annotation to remove method;
- fixed memory leak on module unload - named platform_device_del() is not
enough to free platform device, need platform_device_unregister().
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Sysfs attribute group takes care of proper creation of a set of attributes
and implements proper error unwinding so the driver does not have to do it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Now depends on BACKLIGHT_CLASS_DEVICE.
Driver will return an error if it can't get actual backlight value
Fix remapping of brightness keys when backlight is not controlled by ACPI.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
There should be less code duplication with usage of gotos
Driver won't load if there's no hardware to control
Safer error handling at input driver allocation
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
This driver serves backlight (including switching) and volume up/down
keys for MSI machines providing a specific wmi interface:
551A1F84-FBDD-4125-91DB-3EA8F44F1D45
B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: Matthew Garrett <mjg59@srcf.ucam.org>
Tested-by: Matt Chen <machen@novell.com>
Reviewed-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch adds support for the ACPI events generated by the RFKill
switch on modern Toshiba laptops, and re-enables the Bluetooth USB
device when the switch is flipped back to the 'on' position.
The RFKill switch brute force pulls out the USB device when flipped to
'off', but it doesn't automatically re-enable it. Without this driver,
the Bluetooth is gone until after a reboot on my Portege R500.
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Added new BIOS versions for following netbooks: Acer 1410, Gateway LT31,
Packard Bell DOA150. As the Gateway LT31 machines have different register
values for setting and checking the off-state, the "cmd_off" variable has
been splitted up to "cmd_off" and "chk_off".
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add the basic ALSA mixer functionality. The mixer is event-driven,
and will work fine on IBM ThinkPads. I expect Lenovo ThinkPads will
cause some trouble with the event interface.
Heavily based on work by Lorne Applebaum <lorne.applebaum@gmail.com>
and ideas from Matthew Garrett <mjg@redhat.com>.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Disable volume control by default. It can be enabled at module load
time by a module parameter (volume_control=1).
The audio control mixer that thinkpad-acpi interacts with is fully
functional without any drivers, and operated by hotkeys.
The idea behind the console audio control is that the human operator
is the only one that can interact with it. The ThinkVantage suite in
Windows does not allow any software-based overrides, and only does OSD
(on-screen-display) functions.
The Linux driver will, with the addition of the ALSA interface, try to
follow and enforce the ThinkVantage UI design:
The user is supposed to use the keyboard hotkeys to interact with the
console audio control. The kernel and the desktop environment is
supposed to cooperate to provide proper user feedback through
on-screen-display functions.
Distros are urged to not to enable volume control by default.
Enabling this must be a local admin's decision. This is the reason
why there is no Kconfig option.
Keep in mind that all ThinkPads have a normal, main mixer (AC97 or
HDA) for regular software-based audio control. We are not talking
about that mixer here.
Advanced users are, of course, free to enable volume control and do as
they please.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Lenovo removed the extra mixer since the T61 and thereabouts.
Newer Lenovo models only have the mute gate function, and leave
the volume control to the HDA mixer.
Until a way to automatically query the firmware about its audio
control capabilities is discovered (there might not be any), use a
white/black list.
We will likely need to ask T60 (old and new model) and Z60/Z61 users
whether they have volume control to populate the black/white list.
Meanwhile, provide a volume_capabilities parameter that can be used to
override the defaults.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
I don't trust the coupled EC writes and SMI calls the current volume
control code does very much, although it is exactly what the IBM DSDTs
seem to do (they never do more than a single step though).
Change the driver to stop issuing SMIs, and just drive the EC directly
to the desired level (DSDTs seem to confirm this will work even on
very old models like the 570 and 600e/x).
We checkpoint directly to NVRAM (this can be turned off) at
suspend/shutdown/driver unload, which from what I can see in tbp,
should also work on every ThinkPad.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lorne Applebaum <lorne.applebaum@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We already log the initial state of the hardware rfkill switch (WLSW),
might as well log the state of the softswitches as well.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Josip Rodin <joy+kernel@entuzijast.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Before we register the input device, sync the input layer EV_SW state
through a call to input_report_switch(), to avoid issuing a gratuitous
event for the initial state of these switches.
This fixes some annoyances caused by the interaction with rfkill and
EV_SW SW_RFKILL_ALL events.
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Makes use of skip_spaces() defined in lib/string.c for removing leading
spaces from strings all over the tree.
It decreases lib.a code size by 47 bytes and reuses the function tree-wide:
text data bss dec hex filename
64688 584 592 65864 10148 (TOTALS-BEFORE)
64641 584 592 65817 10119 (TOTALS-AFTER)
Also, while at it, if we see (*str && isspace(*str)), we can be sure to
remove the first condition (*str) as the second one (isspace(*str)) also
evaluates to 0 whenever *str == 0, making it redundant. In other words,
"a char equals zero is never a space".
Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below,
and found occurrences of this pattern on 3 more files:
drivers/leds/led-class.c
drivers/leds/ledtrig-timer.c
drivers/video/output.c
@@
expression str;
@@
( // ignore skip_spaces cases
while (*str && isspace(*str)) { \(str++;\|++str;\) }
|
- *str &&
isspace(*str)
)
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kbuild.h forces include of autoconf.h on the
commandline using -include - so we do not need to
include the file explicit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Newer Dell systems support HotKey features differently from legacy
systems. A new vendor specifc HotKey SMBIOS table (Type 0xB2) is
defined. This table contains a mapping between scancode and the
corresponding predefined keyfunction ( i.e. keycode).. Also, a new
ACPI-WMI event type (called KeyIDList) with a value of 0x0010 is
defined. Any BIOS containing 0xB2 table will send hotkey notifications
using KeyIDList event.
This is Rezwanul's patch, updated to ensure that brightness events are
not sent if the backlight is controlled via ACPI and with the default
keycode for the display output switching altered to match desktop
expectations.
Signed-off-by: Rezwanul Kabir <Rezwanul_Kabir@dell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
dell-laptop may not need to export any sysfs files, but it should still
create a platform device as a parent for the rfkill and backlight
devices. Otherwise sysfs will display these as "virtual" devices,
with no connection to either physical hardware or the dell-laptop
module.
Apparently this is useful for hardware detection.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
dell_setup_rfkill() already cleans up the rfkill devices on failure.
So if it returns an error, we should not try to unregister the rfkill
devices.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The current code in dell-laptop is confused about the hardware rfkill
state. Fix it up such that it's always reported correctly.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
1) Add support for reading the hardware blocked state. Previously
we read a combination of the hardware and software blocked states,
reporting it as the software blocked state. This caused some
confusing behaviour.
2) The software state is persistent, mark it as such.
3) Check rfkill in the resume handler. Both the hard and soft
blocked states may change over hibernation.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPICA: Update version to 20091112.
ACPICA: Add additional module-level code support
ACPICA: Deploy new create integer interface where appropriate
ACPICA: New internal utility function to create Integer objects
ACPICA: Add repair for predefined methods that must return sorted lists
ACPICA: Fix possible fault if return Package objects contain NULL elements
ACPICA: Add post-order callback to acpi_walk_namespace
ACPICA: Change package length error message to an info message
ACPICA: Reduce severity of predefined repair messages, Warning to Info
ACPICA: Update version to 20091013
ACPICA: Fix possible memory leak for Scope ASL operator
ACPICA: Remove possibility of executing _REG methods twice
ACPICA: Add repair for bad _MAT buffers
ACPICA: Add repair for bad _BIF/_BIX packages
As Corentin points out, we do not create a backlight device if the ACPI
video driver is able to provide equivalent functionality. So we do need
to check before we try to update the backlight device.
We now ignore brightness events completely if we have not created a
backlight device. This is slightly more cautious than the original
check.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
fix styles problems introduced by commit
e86bda235a08b6a8e64c1e8bb9d175f6961554e3
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Lenovo SL series laptop has a very similar DSDT with Asus laptops. We can
easily have the extra ACPI function support with little modification in
asus-laptop.c
Here is the hotkey enablement for Lenovo SL series laptop.
This patch will enable the following hotkey:
- Volumn Up
- Volumn Down
- Mute
- Screen Lock (Fn+F2)
- Battery Status (Fn+F3)
- WLAN switch (Fn+F5)
- Video output switch (Fn+F7)
- Touchpad switch (Fn+F8)
- Screen Magnifier (Fn+Space)
The following function of Lenovo SL laptop is still need to be enabled:
- Hotkey: KEY_SUSPEND (Fn+F4), KEY_SLEEP (Fn+F12), Dock Eject (Fn+F9)
- Rfkill for bluetooth and wlan
- LenovoCare LED
- Hwmon for fan speed
- Fingerprint scanner
- Active Protection System
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The same key is used in toshiba-laptop, and there is no
reserved key for that.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Callback methods should not refer to a variable like "eeepc" (formally
"ehotk"). Instead, they should extract the data they need either from
a "driver data" parameter, or the "driver data" field of the object
which they operate on. The "eeepc" variable can then be removed.
In practice, drivers under "drivers/platform" can get away without using
driver data, because it doesn't make sense to have more than one
instance of them. However this makes it harder to review them for
correctness. This is especially true for core ACPI developers who have
not previously been exposed to this anti-pattern :-).
This will serve as an example of best practice for new driver writers
(whether they find it themselves, or have it pointed out during review
:-).
The hwmon sub-device is a special case. It uses ec_{read,write} which
are defined to communicate with the (first) EC, so it does not require
any driver data. It should still only be instantiated in the context of
an ASUS010 device because we don't have a safe way to probe for it.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
CC: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
eeepc-laptop now does a lot more than just hotkeys. Replace the "hotk"
names used throughout the driver with some slightly more appropriate
names. The actual strings used in kernel messages and sysfs are left
unchanged.
e.g.
EEEPC_HOTK_FILE -> EEEPC_LAPTOP_FILE
EEEPC_HOTK_HID -> EEEPC_ACPI_HID
eeepc_hotk_notify -> eeepc_acpi_notify
struct eeepc_hotk -> struct eeepc_laptop
ehotk -> eeepc
I'm about to refactor the entire driver to remove the global "ehotk"
variable, and I don't wish to add "struct eeepc_hotk *ehotk" to
functions which have nothing to do with hotkeys.
Also
- fix the name of "eepc_get_entry_by_keycode()"
- remove the unused definition of NOTIFY_WLAN_ON.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Move e.g. backlight_init() and backlight_exit() together along with the
other backlight functions, instead of grouping init() and exit()
functions. Move e.g. backlight_ops to follow the functions it refers
to, and remove the forward declarations. The code itself should remain
unchanged.
The eeepc-laptop driver implements a number of interfaces like the
backlight class driver. This change makes it easier to examine the
implementation of one interface at at a time, without having to search
through the file to find init() and exit() functions etc.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
This moves the sysfs_create_group() call just after the declaration of
the platform device attributes. It should make it easier to examine
the implementation of the platform device attributes in isolation
from the rest of the code. (The next commit will apply this pattern
to all of the sub-devices as well).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk
Signed-off-by: Len Brown <len.brown@intel.com>
Strictly speaking we should register the platform driver exactly once,
whether there are zero, one, or multiple matching acpi devices.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Separate out input_notify(), in a similar way to how notify_brn()
is already separated. This will allow all the functions which refer to
the input device to be grouped together.
This includes a small behaviour change - we now synthesize brightness
up/down key events even if the brightness is already at the
maximum/minimum value. This is consistent with the new uevent
interface.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The hwmon device uses ec_write() to write values to the EC. So for
consistency it should use ec_read() to read values. The extra layers
of indirection used did not add any value.
This may mean we no longer take the ACPI global lock for such reads
(if the EC operation region requires the lock and the EC does not).
But there is no point locking each one-byte read individually, when
write operations do not use the lock at all.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
We don't need to store init_flags after using them. And we don't use
the result of INIT, so we don't need to allocate a buffer for it.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
We already tell the backlight class our maximum brightness value; it
will validate the user requested values for us.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
eeepc_hotk_notify() cannot be called with ehotk == NULL or bd == NULL.
We check both variables for allocation failure and would bail out before
the notifier is registered.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
If the control method does not exist, return -ENODEV for consistency
with get_acpi()
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
If we bail out because we can't create the led class device, we need to
ensure the led workqueue is cleaned up.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Create the workqueue thread used by tpd_led_set() *before* we register
the led device. (And vice versa for unregistration).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Documentation/hwmon/sysfs-interface tells us that automatic fan speed
control should be represented by a value of 2 or above for pwm1_enable.
Fix eeepc_get_fan_ctrl() to return 2 for automatic fan control.
Setting "1" for manual control is already consistent with the
documentation, so this remains unchanged.
Let's preserve the ABI for this specific driver, so that writing "0"
will still invoke automatic control.
(The documentation says setting "0" should leave the fan at full speed
all the time. This mode is not directly supported by our hardware. Full
speed is rather noisy on my 701 and the automatic control has never used
it. If you really want this e.g. to prolong the life of an EeePC used
as a server, you can always use manual mode. hwmon has always been
fairly machine-specific, and you're in a tiny minority (or elite :-).
I'm sure you're smart enough to notice that the fan doesn't turn on to
full speed when you try this mode, either by ear or checking
fan_input1.
We could even claim to be honouring the spirit of the documentation.
"0" really means "safe mode". EeePCs default to automatic mode, ie that
is what Asus will actually test. Since we do not provide any way to
tamper with the temperature threshold, automatic mode _is_ the safe
option).
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.
After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = acpi_dev->driver;
if (acpi_drv && acpi_drv->ops.suspend)
return acpi_drv->ops.suspend(acpi_dev, state);
Remove all checks for acpi_dev == NULL within these callbacks.
Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.
After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The owner field provides the link between drivers and modules in sysfs,
but no ACPI driver was setting it.
After setting the owner field, we can see which module provides which
driver and vice versa by looking at /sys/bus/acpi/driver/*/module and
/sys/module/*/drivers/acpi:*.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
acpi_bus_register_driver() already checks acpi_disabled, so acpi bus
drivers don't need to.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = acpi_dev->driver;
if (acpi_drv && acpi_drv->ops.suspend)
return acpi_drv->ops.suspend(acpi_dev, state);
Remove all checks for acpi_dev == NULL within these callbacks.
Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
The acpi device callbacks add, start, remove, suspend and resume can
never be called with a NULL acpi_device. Each callsite in acpi/scan.c
has to dereference the device in order to get the ops structure, e.g.
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = acpi_dev->driver;
if (acpi_drv && acpi_drv->ops.suspend)
return acpi_drv->ops.suspend(acpi_dev, state);
Remove all checks for acpi_dev == NULL within these callbacks.
Also remove the checks for acpi_driver_data(acpi_dev) == NULL. None of
these checks could fail unless the driver does something strange
(which none of them do), the acpi core did something terribly wrong,
or we have a memory corruption issue. If this does happen then it's
best to dereference the pointer and crash noisily.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, reading from the disp attribute fails with "No such device",
which is misleading. According to CMSG table on acpi4asus project site,
no models have a getter method corresponding to SDSP. Change the file
permission to disallow reads.
If some joker changes the permission to permit reads, then return -EIO
to be consistent with sysfs' behaviour when no show() method is
provided.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Use input_set_capability() instead of set_bit.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
Log temperatures on any of the EC thermal alarms. It could be
useful to help tracking down what is happening...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
Export the normal (non-command) module paramenters as mode 0444, so
that they will show up in sysfs.
These parameters must not be changed at runtime as a rule, with very
few exceptions.
Reported-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Properly init the parent field of the input device. Thanks to Alan
Jenkins, who noted this problem in a different driver.
Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix this bogus warning during module shutdown, when
backlight event reporting is enabled:
"thinkpad_acpi: required events 0x00018000 not enabled!"
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Take advantage of the new events capabilities of the backlight class to
notify userspace of backlight changes.
This depends on "backlight: Allow drivers to update the core, and
generate events on changes", by Matthew Garrett.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Since the rfkill rework in 2.6.31, the driver is always resuming with
the radios disabled.
Change thinkpad-acpi to ask the firmware to resume with the radios in
the last state. This fixes the Bluetooth and WWAN rfkill switches.
Note that it means we respect the firmware's oddities. Should the
user toggle the hardware rfkill switch on and off, it might cause the
radios to resume enabled.
UWB is an unknown quantity since it has nowhere the same level of
firmware support (no control over state storage in NVRAM, for
example), and might need further fixing. Testers welcome.
This change fixes a regression from 2.6.30.
Reported-by: Jerone Young <jerone.young@canonical.com>
Reported-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: Ian Molton <ian.molton@collabora.co.uk>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
According to a report, the R50e wants EC-based brightness control,
even if it uses an Intel GPU. The current driver default was reported
to not work at all.
This bug can be worked around by the "brightness_mode=3" module
parameter.
Change the default of the R50e and R51 2xxx models (which use the same
EC firmware, 1V) to TPACPI_BRGHT_Q_EC, but keep TPACPI_BRGHT_Q_ASK set
for now, as I'd like to get more reports.
This fixes a regression caused by commit
59fe4fe34d,
"thinkpad-acpi: fix incorrect use of TPACPI_BRGHT_MODE_ECNVRAM"
Kernel 2.6.31 also needs this fix.
Reported-by: Ferenc Wagner <wferi@niif.hu>
Tested-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Return temperature in milidegree instead of degree, as sysfs-api requires
the temperature in milidegree.
Signed-off-by: Peter Feuerer <peter@piie.net>
Tested-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
There is a problem in the quirk tables used by tpacpi_is_fw_known() and
tpacpi_check_outdated_fw(), which causes outdated BIOSes that are lacking
the EC firmware ID DMI field to never match.
This breaks module loading on, e.g. a T23 with outdated BIOS, and the
module will refuse to load unless the "force_load=1" parameter is given.
Fix the quirk tables so that they can also match the outdated BIOSes,
which in turn will both fix the module loading, and also warn the user
that he is using outdated firmware and should upgrade.
This fixes a serious regression, introduced by commit
e675abafcc, "thinkpad-acpi: be more strict
when detecting a ThinkPad".
http://bugzilla.kernel.org/show_bug.cgi?id=14597
Reported-by: Paul Kimoto <kimoto@lightlink.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Tested-by: Paul Kimoto <kimoto@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
The returned error should be negative
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
The existing interface only has a pre-order callback. This change
adds an additional parameter for a post-order callback which will
be more useful for bus scans. ACPICA BZ 779.
Also update the external calls to acpi_walk_namespace.
http://www.acpica.org/bugzilla/show_bug.cgi?id=779
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
WMI provides interface-specific GUIDs that are exported from modules as
modalises, but the core currently generates no events to trigger module
loading. This patch adds support for registering devices for each WMI GUID
and generating the appropriate uevent.
Based heavily on a patch by Carlos Corbacho (<carlos@strangeworlds.co.uk>).
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Switching the camera takes 500ms, checking if it's on is almost free...
The BIOS remembers the setting through reboots, so there's good chance the
camera is already enabled.
Signed-off-by: Luca Niccoli <lultimouomo@gmail.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
rt2860sta is fine with the patch as is, but iwl3945 isn't
(eeepc_rfkill_set() needs to call eeepc_rfkill_hotplug(true) – which means
that we're back to causing the rt2860sta panic
This reverts commit b56ab33d68.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
This works around what I think is actually a bug in rt2860sta which is
triggered when the hardware "disappears" from beneath the driver, i.e. when
wireless is toggled off via ACPI. It does so by ensuring that the rfkill
soft-block flag is set before the hardware is disabled.
I do not know whether this patch is required if rt2800pci is in use instead
of rt2860sta; at the time of submission of this patch, I've not been able to
test this.
(Ref. http://bugzilla.kernel.org/show_bug.cgi?id=13390)
Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently the annotation for function eeepc_enable_camera() is
__init, and refers to a
function eeepc_hotk_add() which is non-init. Use __devinit for both
functions which is
more appropriate and fixes a section mismatch warning.
We were warned by the following warning:
LD drivers/platform/x86/built-in.o
WARNING: drivers/platform/x86/built-in.o(.text+0x12e1): Section
mismatch in reference from the function eeepc_hotk_add() to the
function .init.text:eeepc_enable_camera()
The function eeepc_hotk_add() references
the function __init eeepc_enable_camera().
This is often because eeepc_hotk_add lacks a __init
annotation or the annotation of eeepc_enable_camera is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
A follow-up 2.6.32-rc1's
1e384cb0f9
"fujitsu-laptop: support led-class as module"
It's a trivial fix for one of the CONFIG_LEDS_CLASS ifdefs
which was somehow missed in the original patch.
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
sony-laptop: re-read the rfkill state when resuming from suspend
sony-laptop: check for rfkill hard block at load time
wext: add back wireless/ dir in sysfs for cfg80211 interfaces
wext: Add bound checks for copy_from_user
mac80211: improve/fix mlme messages
cfg80211: always get BSS
iwlwifi: fix 3945 ucode info retrieval after failure
iwlwifi: fix memory leak in command queue handling
iwlwifi: fix debugfs buffer handling
cfg80211: don't set privacy w/o key
cfg80211: wext: don't display BSSID unless associated
net: Add explicit bound checks in net/socket.c
bridge: Fix double-free in br_add_if.
isdn: fix netjet/isdnhdlc build errors
atm: dereference of he_dev->rbps_virt in he_init_group()
ax25: Add missing dev_put in ax25_setsockopt
Revert "sit: stateless autoconf for isatap"
net: fix double skb free in dcbnl
net: fix nlmsg len size for skb when error bit is set.
net: fix vlan_get_size to include vlan_flags size
...
Without this, the hard-blocked state will be reported incorrectly if
the hardware switch is changed while the laptop is suspended.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: Norbert Preining <preining@logic.at>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
"I recently (on a flight) I found out that when I boot with the hard-switch
activated, so turning off all wireless activity on my laptop, the state
is not correctly announced in /dev/rfkill (reading it with rfkill command,
or my own gnome applet)...
After turning off and on again the hard-switch the events were right."
We can fix this by querying the firmware at load time and calling
rfkill_set_hw_state().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: Norbert Preining <preining@logic.at>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Mattia Dongili <malattia@linux.it>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This is unnecessary as OSPM is supposed to call the method already when
the device is discovered.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
The SPIC irq is not really shareable, the IO port cannot be cleared and
always returns some data so there is no real way to understand if the irq
is for us or not. Moreover the _PRS acpi method says the irq is not
shareable.
In addition to this, in some cases, an additional write to the IO port has
to be performed in order to properly decode the event received from the
device. This generates another interrupt which may overlap with the
previous one. In the future this is going to be important for properly
decoding events.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Having separate drivers for SPIC showed to be useless, only type3 has a
slightly different behaviour than the others and there seem to be no real
conflict between them.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix this problem when CONFIG_THINKPAD_ACPI_HOTKEY_POLL is undefined:
CHECK drivers/platform/x86/thinkpad_acpi.c
drivers/platform/x86/thinkpad_acpi.c:1968:21: error: not an lvalue
CC [M] drivers/platform/x86/thinkpad_acpi.o
drivers/platform/x86/thinkpad_acpi.c: In function 'tpacpi_hotkey_driver_mask_set':
drivers/platform/x86/thinkpad_acpi.c:1968: error: lvalue required as left operand of assignment
Reported-by: Noah Dain <noahdain@gmail.com>
Reported-by: Audrius Kazukauskas <audrius@neutrino.lt>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
backlight: new driver for ADP5520/ADP5501 MFD PMICs
backlight: extend event support to also support poll()
backlight/eeepc-laptop: Update the backlight state when we change brightness
backlight/acpi: Update the backlight state when we change brightness
backlight: Allow drivers to update the core, and generate events on changes
backlight: switch to da903x driver to dev_pm_ops
backlight: Add support for the Avionic Design Xanthos backlight device.
backlight: spi driver for LMS283GF05 LCD
backlight: move hp680-bl's probe function to .devinit.text
backlight: Add support for new Apple machines.
backlight: mbp_nvidia_bl: add support for MacBookAir 1,1
backlight: Add WM831x backlight driver
Trivial conflicts due to '#ifdef CONFIG_PM' differences in
drivers/video/backlight/da903x_bl.c
Trigger a status update when the user hits a brightness key, allowing
userspace to present appropriate UI.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Reduce the number of magic numbers in the driver... note that they
were all explained and documented already.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add an internal API to the driver, to allow subdrivers to request and
receive HKEY 0x1000 events. This API will be used by the backlight
(brightness up/down) and upcoming ALSA mixer (volume up/down/mute)
subdrivers.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Update the HKEY event driver to:
1. Handle better the second-gen firmware, which has no HKEY mask
support but does report FN+F3, FN+F4 and FN+F12 without the need
for NVRAM polling.
a) always make the mask-related attributes available in sysfs;
b) use DMI quirks to detect the second-gen firmware;
c) properly report that FN+F3, FN+F4 and FN+F12 are enabled,
and available even on mask-less second-gen firmware;
2. Decouple the issuing of hotkey events towards userspace from
their reception from the firmware. ALSA mixer and brightness
event reporting support will need this feature.
3. Clean up the mess in the hotkey driver a great deal. It is
still very convoluted, and wants a full refactoring into a
proper event API interface, but that is not going to happen
today.
4. Fully reset firmware interface on resume (restore hotkey
mask and status).
5. Stop losing polled events for no good reason when changing the
mask and poll frequencies. We will still lose them when the
hotkey_source_mask is changed, as well as any that happened
between driver suspend and driver resume.
The hotkey subdriver now has the notion of user-space-visible hotkey
event mask, as well as of the set of "hotkey" events the driver needs
(because brightness/volume change reports are not just keypress
reports in most ThinkPad models).
With this rewrite, the ABI level is bumped to 0x020500 should
userspace need to know it is dealing with the updated hotkey
subdriver.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
HKEY event 0x5010 is useless to us: old ThinkPads don't issue it. Newer
ThinkPads won't issue it anymore. And all ThinkPads issue 0x1010 and
0x1011 events.
Just silently drop it instead of sending it to userspace.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
hotkey_exit() is only called if hotkey_init() finished sucessfully, or
by direct calls inside hotkey_init(). The tp_features.hotkey test is
always true, and just adds to the confusion, remove it. Also, avoid
calling hotkey_mask_set() when it won't do anything useful.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
backlight_device_register returns ERR_PTR() in case of problems, and
the current code would leave that ERR_PTR in ibm_backlight_device.
The current code paths won't touch it in that situation, but that could
change. Make sure to set ibm_backlight_device to NULL in the error
path.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
- Apply Borislav Petkov's patch (convert the fancmd[] array to a real
struct thus disambiguating command handling and making code more
readable.)
- Add BIOS product to BIOS table as AOA110 and AOA150 have different
register values
- Add force_product parameter to allow forcing different product
- fix linker warning caused by "acerhdf_drv" not being named
"acerhdf_driver"
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Andreas Mohr <andi@lisas.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy()
In this case, rfkill_destroy was called two times on wifi_rfkill and
never on bluetooth_rfkill.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This adds Topstar Laptop Extras ACPI driver. It enables hotkeys
functionality with Topstar N01 netbook. Besides hotkeys there are
other functions exposed by its ACPI firmware, but for now only
hotkeys reporting on Topstar N01 is supported. Topstar is a chinese
manufacturer, its website can be currently reached at
http://www.topstardigital.cn/
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Reviewed-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy()
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Report KEY_BRIGHTNESSUP and KEY_BRIGHTNESSDOWN input events when the
ThinkPad is in "passive brightness control" mode (because either we or
ACPI video touched _BCL), and ACPI video is not processing these
events by itself.
This happens only on Lenovo ThinkPads with ACPI video support, when
operating with the ACPI video driver in acpi_backlight=vendor mode.
Issuing these events is the right thing to do, and will work around
bugzilla #13368, if userspace is properly configured and actively
handles these events.
For other ThinkPads, and when ACPI video is handling brightness
changes, thinkpad-acpi will continue NOT sending KEY_BRIGHTNESS*
events by default.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Init hotkey_source_mask late, so that we can make use of
hotkey_reserved_mask to avoid polling any of the reserved
hotkeys by default.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
echo "reset" > /proc/acpi/ibm/hotkey should do something non-useless,
so instead of setting it to Fn+F2, Fn+F3, Fn+F5, set it to
hotkey_recommended_mask.
It is not like it will survive for much longer, anyway.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Some analysis of the ACPI DSDTs shows that the HKEY pre-enabled mask
is always 0x80c (FN+F3,FN+F4 and FN+F12), which are the hotkeys that
the second gen of HKEY firmware supported (the first gen didn't report
any hotkeys, the second reported these tree hotkeys but had no mask
support, and the third added mask support).
So, this is probably some sort of backwards compatibility with older
versions of the IBM ThinkVantage suite. We have no use for that, and
I know of exactly ZERO users of that attribute, anyway. Start the
process of getting rid of it.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix some locking, avoid exiting the kthread before kthread_stop() is
called on it, and clean up the hotkey poll routines a little bit.
Also, restore bits in the firmware mask after hotkey_source_mask is
changed. Without this, we leave events disabled...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Use stricter checks to decide that we're running on a supported ThinkPad.
This should remove some possible false positives, although nobody ever
bothered to report any.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Use the quirk infrastructure to warn of outdated firmware and also of
firmware versions that are known to cause problems.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
X40 (firmware 1V) and T41 (firmware 1R) have been confirmed to work
well with the new defaults, so we can stop pestering people to confirm
that fact.
For now, whitelist just these two firmware types. It is best to have
at least one more firmware type confirmed for Radeon 9xxx and Intel
GMA-2 ThinkPads before removing the confirmation requests entirely.
Reported-by: Robert de Rooy <robert.de.rooy@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
The serio ports on i8042 are not completely isolated; while we provide
enough locking to ensure proper serialization when accessing control
and data registers AUX and KBD ports can still have an effect on each
other on PS/2 protocol level. The most prominent effect is that
issuing a command for the device connected to one port may cause
abort of the command currently executing by the device connected to
another port.
Since i8042 nor serio subsystem are not aware of the details of the
PS/2 protocol (length of the commands and their replies and so on) the
locking should be done on libps2 level by adding special handling when
we see that we are dealing with serio port on i8042.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Gets rid of the following warning:
Platform driver 'hp-wmi' needs updating - please use dev_pm_ops
I tested that the resume handler still works on my HP 2510p notebook.
[rjw: Fixed up the definition of hp_wmi_pm_ops.]
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
The 900A provides hotplug notifications on a different ACPI object to
other models.
Reported-by: Trevor <trevor.chart@gmail.com>
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_unregister() should always be followed by rfkill_destroy()
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.
Add GPL commment to internal.h while we are there.
This does not change any actual console output,
asside from a whitespace fix.
Signed-off-by: Len Brown <len.brown@intel.com>
checkpatch doesn't like tab+space for a return statement.
WARNING: suspect code indent for conditional statements (8, 17)
+ if (!device)
+ return -EINVAL;
Signed-off-by: Len Brown <len.brown@intel.com>
Add support for the Fn+F3/Fn+F4 keys and map them
as KEY_KBDILLUMUP and KEY_KBDILLUMDOWN.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Add support for keyboard backlight found in Asus U50VG.
The SMC driver for the Apples does it via LED. To be
consistent with that we create /sys/class/leds/asus::kbd_backlight/
to control the keyboard backlight.
SLKB and GLKB are used to get/set the backlight. On
the U50VG is supports 4 brightness level, but this may
change with other models.
SLKB take a 8 bit integer where the higher bit is used
to toggle the backlight, and the over 7 bits control the
brightness level.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Set the right maximum brightness which is one, because
they can only be on or off.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Add support for getting led brightness directly from
the hardware. Currently we don't need it, but it is needed
to support keyboard backlight/led.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Show HRWS in /sys/platform/devices/asus-laptop/infos.
HRWS is a bitfield used to get information about Hardware
available in the laptop.
Also change sprintf format from 0x%04x to %#x.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
This also involves switching the resume handler from the acpi device
to the platform device. Using the more fine grained handlers allows
two improvements:
1. We only need to recheck rfkill state after resume from hibernation.
2. The wireless LED workaround accounts for up to 1.1s out of 1.7s
resuming devices (when wireless is enabled). We can limit the
workaround to thaw(), so that it only delays suspend to disk.
The workaround is only likely to help when hibernation is aborted.
Suspend to ram cannot be aborted by the user. Device suspend errors may
well happen before eeepc-laptop would even be frozen. Suspend errors
which happen after that could be pretty funky anyway.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Actually it is only the LED which is affected. The bios bug does not
disable the wifi.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
All the rfkill devices are treated as "persistent", 3G is no exception.
This means their state may change over hibernation.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
rfkill_set_sw_state() will already be called by eeepc_rfkill_hotplug().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Sysfs showed the ehotk input device as a "virtual" device - lies!
The input device is provided by a physical device, the eeepc platform.
This requires that we move the creation of the input device to come
after platform device is created. Input initialization is moved from
ehotk_check() [sic] to a new function called eeepc_input_init(). This
brings the input device into line with the other eeepc-laptop devices.
Also, refuse to load if we fail to register the input device.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
1. input and backlight devices were registered after acpi notifications
are enabled. This left a window where eeepc_hotk_notify() might
find these devices in an inconsistent (half-initialized) state.
-> Move all device registration into eeepc_hotk_add(), which is called
before enabling acpi notifications.
2. input and backlight devices were unregistered before acpi
notifications are disabled. This left a window where
eeepc_hotk_notify() might find these devices in an inconsistent
(half-destroyed) state.
-> Move all device unregistration into eeepc_hotk_remove(), which is
called after disabling acpi notifications.
3. The acpi driver was not freed if an error occured further down in
eeepc_laptop_init().
-> The rest of eeepc_laptop_init() has been moved to eeepc_hotk_add(),
so this is no longer a problem.
4. The acpi driver was unregistered before the platform driver. This
left a window where a sysfs access could attempt to read the ehotk
structure after it had been freed by eeepc_hotk_remove().
-> The acpi driver is now unregistered as the last step in
eeepc_laptop_exit(), so this is no longer a problem.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Wifi rfkill state changes can race with pci hotplug cleanup. A simple
fix is to refresh the hotplug state just before deregistering the pci
hotplug slot.
There is also potential for a hotplug notification to fire too early
during setup, while the structures it uses are still being initialised.
(This could only happen if the BIOS performs hotplug itself; a bug
triggered by removing the battery while hibernated). Avoid this by
registering the notifier later. The same refresh mechanism is used
to handle rfkill state changes which can now race with registration.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit d0265f0 "eeepc-laptop: fix hot-unplug on resume" used a workqueue
to protect pci hotplug against multiple simultaneous calls during
resume. It seems to work, but a mutex would be more appropriate.
This is in preparation to fix the potential pci hotplug race on unload.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The whole point of registering as a PCI hotplug driver was to prevent
conflict with pciehp. At the moment it happens to work because
eeepc-laptop is loaded first, but it doesn't work the other way round.
If pciehp is loaded first then we fail to claim the slot - we need to
respect this and not handle hotplug events.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Increment driver version to reflect the changes from this patch series.
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
* Move led_classdev_unregister() calls from fujitsu_cleanup() to
acpi_fujitsu_hotkey_remove().
* Fix ordering in fujitsu_cleanup().
* Fix backlight_device_register() failure handling in fujitsu_init().
* Add missing sysfs group removal on failure to fujitsu_init().
* Add input device unregistering on failure to acpi_fujitsu_add()
and acpi_fujitsu_hotkey_add().
* Add input device unregistering/freeing to acpi_fujitsu_remove()
and acpi_fujitsu_hotkey_remove() (also remove superfluous 'device'
and 'acpi_driver_data(device)' checks while at it).
* Do few minor cleanups.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
This takes care of the following entries from Dan's list:
drivers/platform/x86/fujitsu-laptop.c +327 set_lcd_level(13) warning:
variable derefenced before check 'fujitsu'
drivers/platform/x86/fujitsu-laptop.c +358 set_lcd_level_alt(13) warning:
variable derefenced before check 'fujitsu'
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
device and acpi_driver_data(device) were tested just a few lines above.
A simplified version of the semantic match that finds this problem is as
follows: (http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
expression E;
@@
if (x == NULL || ...) { ... when forall
return ...; }
.. when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\)
(
*x == NULL
|
*x != NULL
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
Support fujitsu-laptop with led-class built as a module instead of
being compiled in.
Signed-off-by: Stephen Gildea <stepheng+linux@gildea.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch is a trivial fix for a config corner case, ensuring that
fujitsu-laptop doesn't get compiled into the kernel when the led class
is a module.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>
Return from bt_rfkill_poll() when hci_get_radio_state() fails.
value is invalid in that case and should not be assigned to the rfkill
state.
This also fixes a double unlock bug.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Completed a major update for the acpi_get_object_info external interface.
Changes include:
- Support for variable, unlimited length HID, UID, and CID strings
- Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
- Call the _SxW power methods on behalf of a device object
- Determine if a device is a PCI root bridge
- Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.
Also, update all invocations of acpi_get_object_info interface
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Summary:
Kernel panic arise when stack protection is enabled, since strncat will
add a null terminating byte '\0'; So in functions
like this one (wmi_query_block):
char wc[4]="WC";
....
strncat(method, block->object_id, 2);
...
the length of wc should be n+1 (wc[5]) or stack protection
fault will arise. This is not noticeable when stack protection is
disabled,but , isn't good either.
Config used: [CONFIG_CC_STACKPROTECTOR_ALL=y,
CONFIG_CC_STACKPROTECTOR=y]
Panic Trace
------------
.... stack-protector: kernel stack corrupted in : fa7b182c
2.6.30-rc8-obelisco-generic
call_trace:
[<c04a6c40>] ? panic+0x45/0xd9
[<c012925d>] ? __stack_chk_fail+0x1c/0x40
[<fa7b182c>] ? wmi_query_block+0x15a/0x162 [wmi]
[<fa7b182c>] ? wmi_query_block+0x15a/0x162 [wmi]
[<fa7e7000>] ? acer_wmi_init+0x00/0x61a [acer_wmi]
[<fa7e7135>] ? acer_wmi_init+0x135/0x61a [acer_wmi]
[<c0101159>] ? do_one_initcall+0x50+0x126
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13514
Signed-off-by: Costantino Leandro <lcostantino@gmail.com>
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OOPS on resume when the wireless adaptor is disabled during suspend was
introduced by "eeepc-laptop: read rfkill soft-blocked state on resume".
Unable to handle kernel NULL pointer dereference
Process s2disk
Tainted: G W
IP: klist_put
Call trace:
? klist_del
? device_del
? device_unregister
? pci_stop_dev
? pci_stop_bus
? pci_remove_device
? eeepc_rfkill_hotplug [eeepc_laptop]
? eeepc_hotk_resume [eeepc_laptop]
? acpi_device_resume
? device_resume
? hibernation_snapshot
It appears the PCI device is removed twice. The eeepc_rfkill_hotplug()
call from the resume handler is racing against the call from the ACPI
notifier callback. The ACPI notification is triggered by the resume
handler when it refreshes the value of CM_ASL_WLAN.
The fix is to serialize hotplug calls using a workqueue.
http://bugzilla.kernel.org/show_bug.cgi?id=13825
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
HBRV-based default selection of backlight control strategy didn't work
well, at least the X41 defines it but doesn't use it and I don't think
it will stop there.
Switch to a white/blacklist. All models that have HBRV defined have
been included in the list, and initially all ATI GPUs will get
ECNVRAM, and the Intel GPUs will get UCMS_STEP.
Symptoms of incorrect backlight mode selection are:
1. Non-working backlight control through sysfs;
2. Backlight gets reset to the lowest level at every shutdown, reboot
and when thinkpad-acpi gets unloaded;
This fixes a regression in 2.6.30, bugzilla #13826
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Tobias Diedrich <ranma+kernel@tdiedrich.de>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
The standard ACPI dock driver can handle the hotplug bays and docks of
the ThinkPads just fine (including batteries) as of 2.6.27, and the
code in thinkpad-acpi for the dock and bay subdrivers is currently
broken anyway...
Userspace needs some love to support the two-stage ejection nicely,
but it is simple enough to do through udev rules (you don't even need
HAL) so this wouldn't justify fixing the dock and bay subdrivers,
either.
That leaves warm-swap bays (_EJ3) support for thinkpad-acpi, as well
as support for the weird dock of the model 570, but since such support
has never left the "experimental" stage, it is also not a strong
enough reason to find a way to fix this code.
Users of ThinkPads with warm-swap bays are urged to request that _EJ3
support be added to the regular ACPI dock driver, if such feature is
indeed useful for them.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, the ThinkPad-ACPI bay and dock drivers are completely
broken, and cause a NULL pointer derreference in kernel mode (and,
therefore, an OOPS) when they try to issue events (i.e. on dock,
undock, bay ejection, etc).
OTOH, the standard ACPI dock driver can handle the hotplug bays and
docks of the ThinkPads just fine (including batteries) as of 2.6.27.
In fact, it does a much better job of it than thinkpad-acpi ever did.
It is just not worth the hassle to find a way to fix this crap without
breaking the (deprecated) thinkpad-acpi dock/bay ABI. This is old,
deprecated code that sees little testing or use.
As a quick fix suitable for -stable backports, mark the thinkpad-acpi
bay and dock subdrivers as BROKEN in Kconfig. The dead code will be
removed by a later patch.
This fixes bugzilla #13669, and should be applied to 2.6.27 and later.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Joerg Platte <jplatte@naasa.net>
Cc: stable@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Some systems may not support input events, or registering the input
handler may have failed. So check that an input device exists before
trying to set the docking and tablet mode state during resume.
Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13865
Reported-and-tested-by: Cédric Godin <cedric@belbone.be>
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits)
cnic: Fix ISCSI_KEVENT_IF_DOWN message handling.
net: irda: init spinlock after memcpy
ixgbe: fix for 82599 errata marking UDP checksum errors
r8169: WakeOnLan fix for the 8168
netxen: reset ring consumer during cleanup
net/bridge: use kobject_put to release kobject in br_add_if error path
smc91x.h: add config for Nomadik evaluation kit
NET: ROSE: Don't use static buffer.
eepro: Read buffer overflow
tokenring: Read buffer overflow
at1700: Read buffer overflow
fealnx: Write outside array bounds
ixgbe: remove unnecessary call to device_init_wakeup
ixgbe: Don't priority tag control frames in DCB mode
ixgbe: Enable FCoE offload when DCB is enabled for 82599
net: Rework mdio-ofgpio driver to use of_mdio infrastructure
register at91_ether using platform_driver_probe
skge: Enable WoL by default if supported
net: KS8851 needs to depend on MII
be2net: Bug fix in the non-lro path. Size of received packet was not updated in statistics properly.
...
Fix another polarity error introduced by the rfkill rewrite,
this time in acer_rfkill_set().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
cxgb3: Fix crash caused by stashing wrong netdev_queue
ixgbe: Fix coexistence of FCoE and Flow Director in 82599
memory barrier: adding smp_mb__after_lock
net: adding memory barrier to the poll and receive callbacks
netpoll: Fix carrier detection for drivers that are using phylib
includecheck fix: include/linux, rfkill.h
p54: tx refused but queue active
Atheros Kconfig needs to be dependent on WLAN_80211
mac80211: fix docbook
mac80211_hwsim: avoid NULL access
ssb: Add support for 4318E
b43: Add support for 4318E
zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
zd1211rw: 07b8:6001 is a ZD1211B
r6040: bump driver version to 0.24 and date to 08 July 2009
r6040: restore MIER register correctly when IRQ line is shared
ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
davinci_emac: fix kernel oops when changing MAC address while interface is down
igb: set lan id prior to configuring phy
mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
...
Fix the third (I think) polarity error I accidentally
introduced in the rfkill rewrite to make wireless work
again on (certain?) HP laptops.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
FYI, there's a post-rc1 build regression with certain configs:
drivers/built-in.o: In function `pci_hp_deregister':
(.text+0xb166): undefined reference to `pci_hp_remove_module_link'
drivers/built-in.o: In function `pci_hp_deregister':
(.text+0xb19f): undefined reference to `pci_destroy_slot'
drivers/built-in.o: In function `__pci_hp_register':
(.text+0xb583): undefined reference to `pci_create_slot'
drivers/built-in.o: In function `__pci_hp_register':
(.text+0xb5b1): undefined reference to `pci_hp_create_module_link'
make: *** [.tmp_vmlinux1] Error 1
Caused by:
| 2b121bc262 is first bad commit
| commit 2b121bc262
| Date: Thu Jun 25 13:25:36 2009 +0200
|
| eeepc-laptop: Register as a pci-hotplug device
which changed the driver to use the PCI hotplug infrastructure, but
didn't do a good job on the Kconfig rules.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CMSG is an ACPI method used to find features available on
an Eee PC. But some features are never repported, even if present.
If the getter of a feature is present, this patch will set
the corresponding bit in cmsg.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
If there is there is no getter defined, get_acpi()
will return -ENODEV.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Refactor rfkill code, because we'll add another
rfkill for wwan3g later.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Convert the unusual printk(EEEPC_<level> uses to
the more standard pr_fmt and pr_<level>(.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The eee contains a logically (but not physically) hotpluggable PCIe slot.
Currently this is handled by adding or removing the PCI device in response
to rfkill events, but if a user has forced pciehp to bind to it (with the
force=1 argument) then both drivers will try to handle the event and
hilarity (in the form of oopses) will ensue. This can be avoided by having
eee-laptop register the slot as a hotplug slot. Only one of pciehp and
eee-laptop will successfully register this, avoiding the problem.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Tested-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Convert the unusual printk(ASUS_<level> uses to
the more standard pr_fmt and pr_<level>(.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Limit cpufv input to acceptables values.
Add an available_cpufv file to show available
presets.
Change cpufv ouput format from %d to %#x, it won't
break compatibility with existing userspace tools, but
it provide a more human readable output.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
In the default Eee PC distribution, there is a modified
asus_acpi driver. eeepc-laptop is a cleaned version of this
driver. Sync ASL enum and getter/setters with asus_acpi.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
asus-laptop have been merged in the kernel two years ago,
it is now stable and used by most distribution instead of
the old asus_acpi driver.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
The bug tracker have moved from sourceforge to
http://dev.iksaif.net . The homepage of the project
is now http://acpi4asus.sf.net with links to the new
bug tracker. No change for the mailing list.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
Mario Limonciello