This adds the driver for the ARM Framebuffer Compression decoders found
in the Amlogic GXM and G12A SoCs.
The Amlogic GXM and G12A AFBC decoder are totally different, the GXM only
handling only the AFBC v1.0 modes and the G12A decoder handling the
AFBC v1.2 modes.
The G12A AFBC decoder is an external IP integrated in the video pipeline,
and the GXM AFBC decoder seems to the an Amlogic custom decoder more
tighly integrated in the video pipeline.
The GXM AFBC decoder can handle only one AFBC plane for 2 available
OSD planes available in HW, and the G12A AFBC decoder can handle up
to 4 AFBC planes for up to 3 OSD planes available in HW.
The Amlogic GXM supports 16x16 SPARSE and 16x16 SPLIT AFBC buffers up
to 4k.
On the other side, for G12A SPLIT is mandatory in 16x16 block mode, but
for 4k modes 32x8+SPLIT AFBC buffers is manadatory for performances reasons.
The RDMA is used here to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a long period of time, producing display glitches.
For this we use the meson_rdma_writel_sync() which adds the register
write tuple (VPU register offset and register value) to the RDMA buffer
and write the value to the HW.
When enabled, the RDMA is enabled to rewrite the same sequence at the
next VSYNC event, until a new buffer is committed to the OSD plane.
Then the Amlogic G12A is switched to RDMA, the Amlogic GXM Decoder
doesn't need a reset/reprogram at each vsync, but needs to keep the
vsync interrupt enabled to trigger the RDMA module.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-6-narmstrong@baylibre.com
The VPU embeds a "Register DMA" that can write a sequence of registers
on the VPU AHB bus, either manually or triggered by an internal IRQ
event like VSYNC or a line input counter.
The initial implementation handles a single channel (over 8), triggered
by the VSYNC irq and does not handle the RDMA irq.
The RDMA will be usefull to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a log period of time, producing display glitches.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-5-narmstrong@baylibre.com
The Amlogic VPU embeds a "Register DMA" that can write a sequence of registers
on the VPU AHB bus, either manually or triggered by an internal IRQ event like
VSYNC or a line input counter.
This adds the register defines.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-3-narmstrong@baylibre.com
Add the registers used to program the ARM Framebuffer Compression decoders
used in the Amlogic GXM and G12A SoCs families.
This also adds the routing and pipeline configuration bits and registers
needed to enable AFBC support.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-2-narmstrong@baylibre.com
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-26-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-25-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-24-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-23-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-22-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-21-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-20-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-19-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver.
While touching the include files sort them
and divide them up in blocks.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-18-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-17-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-16-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-15-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-14-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-13-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-12-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-11-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-10-sam@ravnborg.org
Use the backlight support in drm_panel to simplify the driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-9-sam@ravnborg.org
The panel drivers used drm_panel.drm for two purposes:
1) Argument to drm_mode_duplicate()
2) drm->dev was used in error messages
The first usage is replaced with drm_connector.dev
- drm_connector is already connected to a drm_device
and we have a valid connector
The second usage is replaced with drm_panel.dev
- this makes drivers more consistent in their dev argument
used for dev_err() and friends
With these replacements there are no more uses of drm_panel.drm,
so it is removed from struct drm_panel.
With this change drm_panel_attach() and drm_panel_detach()
no longer have any use as they are empty functions.
v2:
- editorial correction in changelog (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
Today the bridge creates the drm_connector, but that is planned
to be moved to the display drivers.
To facilitate this, update drm_panel_funcs.get_modes() to
take drm_connector as an argument.
All panel drivers implementing get_modes() are updated.
v2:
- drop accidental change (Laurent)
- update docs for get_modes (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
The drm_connector created by drm_panel_bridge was accessed
via drm_panel.connector.
Avoid the detour around drm_panel by providing a simple get method.
This avoids direct access to the connector field in drm_panel in
the two users.
The change is done in preparation for removal of drm_panel.connector.
Update pl111 and tve200 to use the new helper.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Eric Anholt <eric@anholt.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-5-sam@ravnborg.org
Use drm_panel infrastructure for backlight.
Replace direct calls with drm_panel_*() calls
to utilize the drm_panel support.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-4-sam@ravnborg.org
Panels often support backlight as specified in a device tree.
Update the drm_panel infrastructure to support this to
simplify the drivers.
With this the panel driver just needs to add the following to the
probe() function:
err = drm_panel_of_backlight(panel);
if (err)
return err;
Then drm_panel will handle all the rest.
There is one caveat with the backlight support.
If drm_panel_(enable|disable) are called multiple times
in a row then backlight_(enable|disable) will be called multiple times.
The above will happen when a panel drivers unconditionally
calls drm_panel_disable() in their shutdown() function,
whan the panel is already disabled and then shutdown() is called.
Reading the backlight code it seems safe to call
the backlight_(enable|disable) several times.
v3:
- Improve comments, fix grammar (Laurent)
- Do not fail in drm_panel_of_backlight() if no DT support (Laurent)
- Log if backlight_(enable|disable) fails (Laurent)
- Improve drm_panel_of_backlight() docs
- Updated changelog with backlight analysis (triggered by Laurent)
v2:
- Drop test of CONFIG_DRM_PANEL in header-file (Laurent)
- do not enable backlight if ->enable() returns an error
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-3-sam@ravnborg.org
The callbacks in drm_panel_funcs are optional, so do not
return an error just because no callback is assigned.
v2:
- Document what functions in drm_panel_funcs are optional (Laurent)
- Return -EOPNOTSUPP if get_modes() is not assigned (Laurent)
(Sam: -EOPNOTSUPP seems to best error code in this situation)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-2-sam@ravnborg.org
The [pre_]enable/[post_]disable hooks are passed the old atomic state.
Update the doc and rename the arguments to make it clear.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-8-boris.brezillon@collabora.com
The drm_bridge_get_prev_bridge() helper will be useful for bridge
drivers that want to do bus format negotiation with their neighbours.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-7-boris.brezillon@collabora.com
To iterate over all bridges attached to a specific encoder.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-6-boris.brezillon@collabora.com
So that each element in the chain can easily access its predecessor.
This will be needed to support bus format negotiation between elements
of the bridge chain.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-5-boris.brezillon@collabora.com
We are about to replace the single-linked bridge list by a double-linked
one based on list.h, leading to the suppression of the encoder->bridge
field. But before we can do that we must provide a
drm_bridge_chain_get_first_bridge() bridge helper and patch all drivers
and core helpers to use it instead of directly accessing encoder->bridge.
Note that we still have 2 drivers (VC4 and Exynos) manipulating the
encoder->bridge field directly because they need to cut the bridge chain
in order to control the enable/disable sequence. This is definitely
not something we want to encourage, so let's keep those 2 oddities
around until we find a better solution.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-4-boris.brezillon@collabora.com
And use it in drivers accessing the bridge->next field directly.
This is part of our attempt to make the bridge chain a double-linked list
based on the generic list helpers.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-3-boris.brezillon@collabora.com
Change the prefix of bridge helpers targeting a bridge chain from
drm_bridge_ to drm_bridge_chain_ to better reflect the fact that
the operation will happen on all elements of chain, starting at the
bridge passed in argument.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203141515.3597631-2-boris.brezillon@collabora.com
[Why]
This patch is trying to address the issue observed when hotplug DP
daisy chain monitors.
e.g.
src-mstb-mstb-sst -> src (unplug) mstb-mstb-sst -> src-mstb-mstb-sst
(plug in again)
Once unplug a DP MST capable device, driver will call
drm_dp_mst_topology_mgr_set_mst() to disable MST. In this function,
it cleans data of topology manager while disabling mst_state. However,
it doesn't clean up the proposed_vcpis of topology manager.
If proposed_vcpi is not reset, once plug in MST daisy chain monitors
later, code will fail at checking port validation while trying to
allocate payloads.
When MST capable device is plugged in again and try to allocate
payloads by calling drm_dp_update_payload_part1(), this
function will iterate over all proposed virtual channels to see if
any proposed VCPI's num_slots is greater than 0. If any proposed
VCPI's num_slots is greater than 0 and the port which the
specific virtual channel directed to is not in the topology, code then
fails at the port validation. Since there are stale VCPI allocations
from the previous topology enablement in proposed_vcpi[], code will fail
at port validation and reurn EINVAL.
[How]
Clean up the data of stale proposed_vcpi[] and reset mgr->proposed_vcpis
to NULL while disabling mst in drm_dp_mst_topology_mgr_set_mst().
Changes since v1:
*Add on more details in commit message to describe the issue which the
patch is trying to fix
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
[added cc to stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205090043.7580-1-Wayne.Lin@amd.com
Cc: <stable@vger.kernel.org> # v3.17+
The field lost_pixels in struct udl_device was supposed to signal an
error during USB transfers of the framebuffer data. The driver would
have to schedule a re-transfer at a later point. This code was never
implemented. Remove lost_pixels and return regular error codes instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-8-tzimmermann@suse.de
The damage-handler code now invokes dma_buf_{begin,end}_access()
for imported buffers. These calls were missing from the page-flip
and modesetting code paths. The patch also fixes an bug in the
original where an error code was overwritten by the result of
dma_buf_end_cpu_access().
v2:
* only return an error code from dma_buf_end_cpu_access() if
no other error code has been set before
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-7-tzimmermann@suse.de
Computing the cpp value's logarithm in a separate helper function makes
the damage-handler code more readable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-6-tzimmermann@suse.de
Computing the clip rectable in a separate helper function makes the
damage-handler code more readable.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-5-tzimmermann@suse.de
A call to udl_render_hline() returns the number of identical and
sent pixels. None of these values is used. Remove the parameters.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-3-tzimmermann@suse.de
Use the shared address space of the drm device (see drm_open() in
drm_file.c) for dma-bufs too. That removes a difference betweem drm
device mmap vmas and dma-buf mmap vmas and fixes corner cases like
dropping ptes (using madvise(DONTNEED) for example) not working
properly.
Also remove amdgpu driver's private dmabuf update. It is not needed
any more now that we are doing this for everybody.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20191127092523.5620-3-kraxel@redhat.com
Neil Armstrong