Commit Graph

80 Commits

Author SHA1 Message Date
Michael Scott d2891c4d07 Bluetooth: 6lowpan: fix delay work init in add_peer_chan()
When adding 6lowpan devices very rapidly we sometimes see a crash:
[23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1
[23122.315400] Hardware name: HiKey Development Board (DT)
[23122.320623] task: ffff800075443080 task.stack: ffff800075484000
[23122.326551] PC is at expire_timers+0x70/0x150
[23122.330907] LR is at run_timer_softirq+0xa0/0x1a0
[23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5

This was due to add_peer_chan() unconditionally initializing the
lowpan_btle_dev->notify_peers delayed work structure, even if the
lowpan_btle_dev passed into add_peer_chan() had previously been
initialized.

Normally, this would go unnoticed as the delayed work timer is set for
100 msec, however when calling add_peer_chan() faster than 100 msec it
clears out a previously queued delay work causing the crash above.

To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed
in so that it only performs the delay work initialization when needed.

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:39 +02:00
Colin Ian King fa0eaf840a 6lowpan: fix assignment of peer_addr
The data from peer->chan->dst is not being copied to peer_addr, the
current code just updates the pointer and not the contents of what
it points to.  Fix this with the intended assignment.

Detected by CoverityScan, CID#1422111 ("Parse warning
(PW.PARAM_SET_BUT_NOT_USED)")

Fixes: fb6f2f606ce8 ("6lowpan: Fix IID format for Bluetooth")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:39 +02:00
Luiz Augusto von Dentz 9dae2e0303 6lowpan: Fix IID format for Bluetooth
According to RFC 7668 U/L bit shall not be used:

https://wiki.tools.ietf.org/html/rfc7668#section-3.2.2 [Page 10]:

   In the figure, letter 'b' represents a bit from the
   Bluetooth device address, copied as is without any changes on any
   bit.  This means that no bit in the IID indicates whether the
   underlying Bluetooth device address is public or random.

   |0              1|1              3|3              4|4              6|
   |0              5|6              1|2              7|8              3|
   +----------------+----------------+----------------+----------------+
   |bbbbbbbbbbbbbbbb|bbbbbbbb11111111|11111110bbbbbbbb|bbbbbbbbbbbbbbbb|
   +----------------+----------------+----------------+----------------+

Because of this the code cannot figure out the address type from the IP
address anymore thus it makes no sense to use peer_lookup_ba as it needs
the peer address type.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:36 +02:00
Luiz Augusto von Dentz fa09ae661f 6lowpan: Use netdev addr_len to determine lladdr len
This allow technologies such as Bluetooth to use its native lladdr which
is eui48 instead of eui64 which was expected by functions like
lowpan_header_decompress and lowpan_header_compress.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:36 +02:00
Patrik Flykt c259d1413b bluetooth: Set 6 byte device addresses
Set BTLE MAC addresses that are 6 bytes long and not 8 bytes
that are used in other places with 6lowpan.

Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-12 22:02:36 +02:00
Peter Zijlstra 2c935bc572 locking/atomic, kref: Add kref_read()
Since we need to change the implementation, stop exposing internals.

Provide kref_read() to read the current reference count; typically
used for debug messages.

Kills two anti-patterns:

	atomic_read(&kref->refcount)
	kref->refcount.counter

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14 11:37:18 +01:00
Johan Hedberg 39385cb5f3 Bluetooth: Fix using the correct source address type
The hci_get_route() API is used to look up local HCI devices, however
so far it has been incapable of dealing with anything else than the
public address of HCI devices. This completely breaks with LE-only HCI
devices that do not come with a public address, but use a static
random address instead.

This patch exteds the hci_get_route() API with a src_type parameter
that's used for comparing with the right address of each HCI device.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-11-22 22:50:46 +01:00
Eric Dumazet d3fff6c443 net: add netdev_lockdep_set_classes() helper
It is time to add netdev_lockdep_set_classes() helper
so that lockdep annotations per device type are easier to manage.

This removes a lot of copies and missing annotations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 13:28:37 -07:00
Eric Dumazet f9eb8aea2a net_sched: transform qdisc running bit into a seqcount
Instead of using a single bit (__QDISC___STATE_RUNNING)
in sch->__state, use a seqcount.

This adds lockdep support, but more importantly it will allow us
to sample qdisc/class statistics without having to grab qdisc root lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 16:37:13 -07:00
Glenn Ruben Bakke 55441070ca Bluetooth: 6lowpan: Fix memory corruption of ipv6 destination address
The memcpy of ipv6 header destination address to the skb control block
(sbk->cb) in header_create() results in currupted memory when bt_xmit()
is issued. The skb->cb is "released" in the return of header_create()
making room for lower layer to minipulate the skb->cb.

The value retrieved in bt_xmit is not persistent across header creation
and sending, and the lower layer will overwrite portions of skb->cb,
making the copied destination address wrong.

The memory corruption will lead to non-working multicast as the first 4
bytes of the copied destination address is replaced by a value that
resolves into a non-multicast prefix.

This fix removes the dependency on the skb control block between header
creation and send, by moving the destination address memcpy to the send
function path (setup_create, which is called from bt_xmit).

Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.5+
2016-04-26 01:08:25 +02:00
Alexander Aring 2e4d60cbcf 6lowpan: change naming for lowpan private data
This patch changes the naming for interface private data for lowpan
intefaces. The current private data scheme is:

-------------------------------------------------
|    6LoWPAN Generic   |    LinkLayer 6LoWPAN   |
-------------------------------------------------

the current naming schemes are:

- 6LoWPAN Generic:
  - lowpan_priv
- LinkLayer 6LoWPAN:
  - BTLE
    - lowpan_dev
  - 802.15.4:
    - lowpan_dev_info

the new naming scheme with this patch will be:

- 6LoWPAN Generic:
  - lowpan_dev
- LinkLayer 6LoWPAN:
  - BTLE
    - lowpan_btle_dev
  - 802.15.4:
    - lowpan_802154_dev

Signed-off-by: Alexander Aring <aar@pengutronix.de>
Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13 10:41:09 +02:00
Lukasz Duda 87f5fedb3b Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packets
This patch fixes incorrect handling of the 6lowpan packets that contain
uncompressed IPv6 header.

RFC4944 specifies a special dispatch for 6lowpan to carry uncompressed
IPv6 header. This dispatch (1 byte long) has to be removed during
reception and skb data pointer has to be moved. To correctly point in
the beginning of the IPv6 header the dispatch byte has to be pulled off
before packet can be processed by netif_rx_in().

Test scenario: IPv6 packets are not correctly interpreted by the network
layer when IPv6 header is not compressed (e.g. ICMPv6 Echo Reply is not
propagated correctly to the ICMPv6 layer because the extra byte will make
the header look corrupted).

Similar approach is done for IEEE 802.15.4.

Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org # 4.4+
2016-01-23 12:25:53 +00:00
Glenn Ruben Bakke 4c58f3282e Bluetooth: 6lowpan: Fix kernel NULL pointer dereferences
The fixes provided in this patch assigns a valid net_device structure to
skb before dispatching it for further processing.

Scenario #1:
============

Bluetooth 6lowpan receives an uncompressed IPv6 header, and dispatches it
to netif. The following error occurs:

Null pointer dereference error #1 crash log:

[  845.854013] BUG: unable to handle kernel NULL pointer dereference at
               0000000000000048
[  845.855785] IP: [<ffffffff816e3d36>] enqueue_to_backlog+0x56/0x240
...
[  845.909459] Call Trace:
[  845.911678]  [<ffffffff816e3f64>] netif_rx_internal+0x44/0xf0

The first modification fixes the NULL pointer dereference error by
assigning dev to the local_skb in order to set a valid net_device before
processing the skb by netif_rx_ni().

Scenario #2:
============

Bluetooth 6lowpan receives an UDP compressed message which needs further
decompression by nhc_udp. The following error occurs:

Null pointer dereference error #2 crash log:

[   63.295149] BUG: unable to handle kernel NULL pointer dereference at
               0000000000000840
[   63.295931] IP: [<ffffffffc0559540>] udp_uncompress+0x320/0x626
               [nhc_udp]

The second modification fixes the NULL pointer dereference error by
assigning dev to the local_skb in the case of a udp compressed packet.
The 6lowpan udp_uncompress function expects that the net_device is set in
the skb when checking lltype.

Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: stable@vger.kernel.org # 4.4+
2016-01-23 12:21:47 +00:00
Alexander Aring 00f5931411 6lowpan: add lowpan dev register helpers
This patch introduces register and unregister functionality for lowpan
interfaces. While register a lowpan interface there are several things
which need to be initialize by the 6lowpan subsystem. Upcoming
functionality need to register/unregister per interface components e.g.
debugfs entry.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 01:25:25 +01:00
Alexander Aring 324e786ee3 bluetooth: 6lowpan: fix NOHZ: local_softirq_pending
Jukka reported about the following warning:

"NOHZ: local_softirq_pending 08"

I remember this warning and we had a similar issue when using workqueues
and calling netif_rx. See commit 5ff3fec ("mac802154: fix NOHZ
local_softirq_pending 08 warning").

This warning occurs when calling "netif_rx" inside the wrong context
(non softirq context). The net core api offers "netif_rx_ni" to call
netif_rx inside the correct softirq context.

Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-27 09:53:36 +01:00
Johan Hedberg f5ad4ffceb Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible
Use the new hci_conn_hash_lookup_le() API to look up LE connections.
This way we're guaranteed exact matches that also take into account
the address type.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21 18:39:16 +02:00
Alexander Aring 8911d7748c 6lowpan: cleanup lowpan_header_decompress
This patch changes the lowpan_header_decompress function by removing
inklayer related information from parameters. This is currently for
supporting short and extended address for iphc handling in 802154.
We don't support short address handling anyway right now, but there
exists already code for handling short addresses in
lowpan_header_decompress.

The address parameters are also changed to a void pointer, so 6LoWPAN
linklayer specific code can put complex structures as these parameters
and cast it again inside the generic code by evaluating linklayer type
before. The order is also changed by destination address at first and
then source address, which is the same like all others functions where
destination is always the first, memcpy, dev_hard_header,
lowpan_header_compress, etc.

This patch also moves the fetching of iphc values from 6LoWPAN linklayer
specific code into the generic branch.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21 00:49:24 +02:00
Alexander Aring a6f773891a 6lowpan: cleanup lowpan_header_compress
This patch changes the lowpan_header_compress function by removing
unused parameters like "len" and drop static value parameters of
protocol type. Instead we really check the protocol type inside inside
the skb structure. Also we drop the use of IEEE802154_ADDR_LEN which is
link-layer specific. Instead we using EUI64_ADDR_LEN which should always
the default case for now.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21 00:49:24 +02:00
Alexander Aring cefdb801c8 bluetooth: 6lowpan: use lowpan dispatch helpers
This patch adds a check if the dataroom of skb contains a dispatch value
by checking if skb->len != 0. This patch also change the dispatch
evaluation by the recently introduced helpers for checking the common
6LoWPAN dispatch values for IPv6 and IPHC header.

There was also a forgotten else branch which should drop the packet if
no matching dispatch is available.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-21 00:49:24 +02:00
Alexander Aring 4d6a6aed22 6lowpan: move shared settings to lowpan_netdev_setup
This patch moves values for all lowpan interface to the shared
implementation of 6lowpan. This patch also quietly fixes the forgotten
IFF_NO_QUEUE flag for the bluetooth 6LoWPAN interface. An identically
commit is 4afbc0d ("net: 6lowpan: convert to using IFF_NO_QUEUE") which
wasn't changed for bluetooth 6lowpan.

All 6lowpan interfaces should be virtual with IFF_NO_QUEUE, using EUI64
address length, the mtu size is 1280 (IPV6_MIN_MTU) and the netdev type
is ARPHRD_6LOWPAN.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08 14:25:34 +02:00
Johan Hedberg 26d46dffbe Bluetooth: 6lowpan: Remove unnecessary chan_get() function
The chan_get() function just adds unnecessary indirection to calling
the chan_create() call. The only added value it gives is the chan->ops
assignment, but that can equally well be done in the calling code.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08 10:43:52 +02:00
Johan Hedberg 0cd088fc97 Bluetooth: 6lowpan: Rename confusing 'pchan' variables
The typical convention when having both a child and a parent channel
variable is to call the former 'chan' and the latter 'pchan'. When
there's only one variable it's called chan. Rename the 'pchan'
variables in the 6lowpan code to follow this convention.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08 10:43:52 +02:00
Johan Hedberg 630ef791ea Bluetooth: 6lowpan: Remove unnecessary chan_open() function
All the chan_open() function now does is to call chan_create() so it
doesn't really add any value.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08 10:43:52 +02:00
Johan Hedberg b0c09f94ff Bluetooth: 6lowpan: Remove redundant BT_CONNECTED assignment
The L2CAP core code makes sure of setting the channel state to
BT_CONNECTED, so there's no need for the implementation code (6lowpan
in this case) to do it.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08 10:43:52 +02:00
Johan Hedberg 5d0fd77a04 Bluetooth: 6lowpan: Remove redundant (and incorrect) MPS assignments
The L2CAP core code already sets the local MPS to a sane value. The
remote MPS value otoh comes from the remote side so there's no point
in trying to hard-code it to any value.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08 10:43:52 +02:00
Johan Hedberg 301de2cb6a Bluetooth: 6lowpan: Fix imtu & omtu values
The omtu value is determined by the remote peer so there's no point in
trying to hard-code it to any value. The IPSP specification otoh gives
a more reasonable value for the imtu, i.e. 1280.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-08 10:43:52 +02:00
Alexander Aring b72f6f51dc 6lowpan: add generic 6lowpan netdev private data
This patch introduced the 6lowpan netdev private data struct. We name it
lowpan_priv and it's placed at the beginning of netdev private data. All
lowpan interfaces should allocate this room at first of netdev private
data. 6LoWPAN LL private data can be allocate by additional netdev private
data, e.g. dev->priv_size should be "sizeof(struct lowpan_priv) +
sizeof(LL_LOWPAN_PRIVATE_DATA)".

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11 22:05:36 +02:00
Alexander Aring a42bbba5af Bluetooth: 6lowpan: change netdev_priv to lowpan_dev
The usually way to get the btle lowpan private data is to use the
introduced lowpan_dev inline function. This patch will cleanup by using
lowpan_dev consequently.

Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11 22:05:36 +02:00
Alexander Aring 5857d1dbae Bluetooth: 6lowpan: Fix possible race
This patch fix a possible race after calling register_netdev. After
calling netdev_register it could be possible that netdev_ops callbacks
use the uninitialized private data of lowpan_dev. By moving the
initialization of this data before netdev_register we can be sure that
initialized private data is be used after netdev_register.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-30 14:11:36 +02:00
Glenn Ruben Bakke 89e4042861 Bluetooth: 6lowpan: Fix module refcount
This patch removes the additional module_put() in disconnect_all_peers()
making a correct module refcount so that the module can be removed after
disabling 6lowpan through debugfs.

Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17 19:17:58 +02:00
Glenn Ruben Bakke 2ad88fb2c0 Bluetooth: 6lowpan: Fix double kfree of netdev priv
This patch removes the kfree of the netdev priv in device_event() upon
NETDEV_UNREGISTER event. The freeing of memory is taken care of by the
netdev destructor.

Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17 19:17:58 +02:00
Glenn Ruben Bakke fc84242f7a Bluetooth: 6lowpan: Move netdev sysfs device reference
This patch moves the sysfs device used by the netdev from the device of
the first connected peer to the hci sysfs device. Using the sysfs device
of hci instead of the first connected device fixes this issue such that
the sysfs group of tx-0 and bt0 kobject are still present after the last
peer has been deleted and all sysfs entries can be removed.

Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17 19:17:58 +02:00
Glenn Ruben Bakke f63666d209 Bluetooth: 6lowpan: Rename ambiguous variable
This patch renames the variable used to trigger scheduling of
delete_netdev. Changed to infinitiv in order to describe the action
to be done.

Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17 19:17:58 +02:00
Glenn Ruben Bakke a2105ae1de Bluetooth: 6lowpan: Enable delete_netdev to be scheduled when last peer is deleted
This patch fixes an issue with the netdev not being unregistered when
the last peer is deleted. Removing the logical negation operator on the
boolean solves this issue. If the last peer is removed the condition
will be true, and the delete_netdev() is scheduled.

Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no>
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17 19:17:57 +02:00
Martin KaFai Lau 2647a9b070 ipv6: Remove external dependency on rt6i_gateway and RTF_ANYCAST
When creating a RTF_CACHE route, RTF_ANYCAST is set based on rt6i_dst.
Also, rt6i_gateway is always set to the nexthop while the nexthop
could be a gateway or the rt6i_dst.addr.

After removing the rt6i_dst and rt6i_src dependency in the last patch,
we also need to stop the caller from depending on rt6i_gateway and
RTF_ANYCAST.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25 13:25:33 -04:00
Jukka Rissanen 7b2ed60ed4 Bluetooth: 6lowpan: Remove PSM setting code
Removing PSM setting debugfs interface as the IPSP has a well
defined PSM value that should be used.

The patch introduces enable flag that can be used to toggle
6lowpan on/off.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-14 22:48:13 +01:00
Jukka Rissanen 004fa5ed08 Bluetooth: 6lowpan: Do not free skb when packet is dropped
If we need to drop the message because of some error in the
compression etc, then do not free the skb as that is done
automatically in other part of networking stack.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-19 13:39:50 +01:00
Al Viro 17836394e5 first fruits - kill l2cap ->memcpy_fromiovec()
Just use copy_from_iter().  That's what this method is trying to do
in all cases, in a very convoluted fashion.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09 16:29:10 -05:00
Al Viro c0371da604 put iov_iter into msghdr
Note that the code _using_ ->msg_iter at that point will be very
unhappy with anything other than unshifted iovec-backed iov_iter.
We still need to convert users to proper primitives.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09 16:29:03 -05:00
Johan Hedberg 2773b02422 Bluetooth: Fix correct nesting for 6lowpan server channel
Server channels in BT_LISTEN state should use L2CAP_NESTING_PARENT. This
patch fixes the nesting value for the 6lowpan channel.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-13 09:11:37 +01:00
Johan Hedberg 4e79022677 Bluetooth: 6lowpan: Remove unnecessary RCU callback
When kfree() is all that's needed to free an object protected by RCU
there's a kfree_rcu() convenience function that can be used. This patch
updates the 6lowpan code to use this, thereby eliminating the need for
the separate peer_free() function.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-11 14:26:02 +01:00
Alexander Aring b0c42cd7b2 Bluetooth: 6lowpan: fix skb_unshare behaviour
This patch reverts commit:

a7807d73 ("Bluetooth: 6lowpan: Avoid memory leak if memory allocation
fails")

which was wrong suggested by Alexander Aring. The function skb_unshare
run also kfree_skb on failure.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 3.18.x
2014-11-08 20:29:35 +01:00
Martin Townsend 56b2c3eea3 6lowpan: move skb_free from error paths in decompression
Currently we ensure that the skb is freed on every error path in IPHC
decompression which makes it easy to introduce skb leaks.  By centralising
the skb_free into the receive function it makes future decompression routines
easier to maintain.  It does come at the expense of ensuring that the skb
passed into the decompression routine must not be copied.

Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-06 22:09:48 +01:00
Dan Carpenter daac197ca9 Bluetooth: 6lowpan: use after free in disconnect_devices()
This was accidentally changed from list_for_each_entry_safe() to
list_for_each_entry() so now it has a use after free bug.  I've changed
it back.

Fixes: 9030582963 ('Bluetooth: 6lowpan: Converting rwlocks to use RCU')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-30 17:23:25 +01:00
Jukka Rissanen df092306d6 Bluetooth: 6lowpan: Fix lockdep splats
When a device ndo_start_xmit() calls again dev_queue_xmit(),
lockdep can complain because dev_queue_xmit() is re-entered and the
spinlocks protecting tx queues share a common lockdep class.

Same issue was fixed for ieee802154 in commit "20e7c4e80dcd"

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28 17:04:39 +01:00
Jukka Rissanen 9030582963 Bluetooth: 6lowpan: Converting rwlocks to use RCU
The rwlocks are converted to use RCU. This helps performance as the
irq locks are not needed any more.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28 17:04:38 +01:00
Martin Townsend 01141234f2 ieee802154: 6lowpan: rename process_data and lowpan_process_data
As we have decouple decompression from data delivery we can now rename all
occurences of process_data in receive path.

Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 15:51:16 +01:00
Martin Townsend 3c400b843d bluetooth:6lowpan: use consume_skb when packet processed successfully
Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 15:51:16 +01:00
Martin Townsend 04dfd7386a 6lowpan: fix process_data return values
As process_data now returns just error codes fix up the calls to this
function to only drop the skb if an error code is returned.

Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 15:51:15 +01:00
Martin Townsend f8b361768e 6lowpan: remove skb_deliver from IPHC
Separating skb delivery from decompression ensures that we can support further
decompression schemes and removes the mixed return value of error codes with
NET_RX_FOO.

Signed-off-by: Martin Townsend <mtownsend1973@gmail.com>
Acked-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-27 15:51:15 +01:00