Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no reason now not to use kvmalloc, so replace the internal
metadata allocation scheme.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hans Holmberg <hans@owltronix.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch is made in order to prepare read path for new approach to
partial read handling, which is simpler in compare with previous one.
The most important change is to move the handling of completed and
failed bio from the pblk_make_rq() to particular read and write
functions. This is needed, since after partial read path changes,
sometimes completed/failed bio will be different from original one, so
we cannot do this any longer in pblk_make_rq().
Other changes are small read path refactor in order to reduce the size
of the following patch with partial read changes.
Generally the goal of this patch is not to change the functionality,
but just to prepare the code for the following changes.
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For large size io where blk_queue_split needs to be called inside
pblk_rw_io, results in bio leak as bio_endio is not called on the
newly allocated. One way to observe this is to mounting ext4
filesystem on the target and issuing 1MB io with dd, e.g., dd bs=1MB
if=/dev/null of=/mount/myvolume. kmemleak reports:
unreferenced object 0xffff88803d7d0100 (size 256):
comm "kworker/u16:1", pid 68, jiffies 4294899333 (age 284.120s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 60 e8 31 81 88 ff ff .........`.1....
01 40 00 00 06 06 00 00 00 00 00 00 05 00 00 00 .@..............
backtrace:
[<000000001f5aa04f>] kmem_cache_alloc+0x204/0x3c0
[<0000000040945aab>] mempool_alloc_slab+0x1d/0x30
[<00000000b4959ab4>] mempool_alloc+0x83/0x220
[<00000000646bad9b>] bio_alloc_bioset+0x229/0x320
[<000000009264b251>] bio_clone_fast+0x26/0xc0
[<0000000008250252>] bio_split+0x41/0x110
[<00000000e365cad0>] blk_queue_split+0x349/0x930
[<00000000eb5426bc>] pblk_make_rq+0x1b5/0x1f0
[<00000000eea09cec>] generic_make_request+0x2f9/0x690
[<00000000ae6acede>] submit_bio+0x12e/0x1f0
[<00000000f9b8b82a>] ext4_io_submit+0x64/0x80
[<000000009e4f817d>] ext4_bio_write_page+0x32e/0x890
[<00000000cbd0d106>] mpage_submit_page+0x65/0xc0
[<000000000eec7359>] mpage_map_and_submit_buffers+0x171/0x330
[<000000009a7afcb6>] ext4_writepages+0xd5e/0x1650
[<000000004476b096>] do_writepages+0x39/0xc0
In case there is a need for a split, blk_queue_split returns the newly
allocated bio to the caller by changing the value of pointer passed as
a reference, while the original is passed to generic_make_requests.
Although pblk_rw_io's local variable bio* has changed and passed to
pblk_submit_read and pblk_write_to_cache, work is done on this new
bio*, and pblk_rw_io returns NVM_IO_DONE, pblk_make_rq calls bio_endio
on the old bio* because it passed bio pointer by value to pblk_rw_io.
pblk_rw_io is unfolded into pblk_make_rq so that there is no copying
of bio* and bio_endio is called on the correct bio*.
Signed-off-by: Chansol Kim <chansol.kim@samsung.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
L2P table can be huge in many cases, since it typically requires 1GB
of DRAM for 1TB of drive. When there is not enough memory available,
OOM killer turns on and kills random processes, which can be very
annoying for users.
This patch changes the flag for L2P table allocation on order to handle
this situation in more user friendly way.
GFP_KERNEL and __GPF_HIGHMEM are default flags used in parameterless
vmalloc() calls, so they are also keeped in that patch. Additionally
__GFP_NOWARN flag is added in order to hide very long dmesg warn in
case of the allocation failures. The most important flag introduced
in that patch is __GFP_RETRY_MAYFAIL, which would cause allocator
to try use free memory and if not available to drop caches, but not
to run OOM killer.
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently L2P map size is calculated based on the total number of
available sectors, which is redundant, since it contains mapping for
overprovisioning as well (11% by default).
Change this size to the real capacity and thus reduce the memory
footprint significantly - with default op value it is approx.
110MB of DRAM less for every 1TB of media.
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk_line_meta_free might sleep (it can end up calling vfree, depending
on how we allocate lba lists), and this can lead to a BUG()
if we wake up on a different cpu and release the lock.
As there is no point of grabbing the free lock when pblk has shut down,
remove the lock.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk performs recovery of open lines by storing the LBA in the per LBA
metadata field. Recovery therefore only works for drives that has this
field.
This patch adds support for packed metadata, which store l2p mapping
for open lines in last sector of every write unit and enables drives
without per IO metadata to recover open lines.
After this patch, drives with OOB size <16B will use packed metadata
and metadata size larger than16B will continue to use the device per
IO metadata.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently pblk only check the size of I/O metadata and does not take
into account if this metadata is in a separate buffer or interleaved
in a single metadata buffer.
In reality only the first scenario is supported, where second mode will
break pblk functionality during any IO operation.
This patch prevents pblk to be instantiated in case device only
supports interleaved metadata.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently lightnvm and pblk uses single DMA pool, for which the entry
size always is equal to PAGE_SIZE. The contents of each entry allocated
from the DMA pool consists of a PPA list (8bytes * 64), leaving
56bytes * 64 space for metadata. Since the metadata field can be bigger,
such as 128 bytes, the static size does not cover this use-case.
This patch adds support for I/O metadata above 56 bytes by changing DMA
pool size based on device meta size and allows pblk to use OOB metadata
>=16B.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk currently assumes that size of OOB metadata on drive is always
equal to size of pblk_sec_meta struct. This commit add helpers which will
allow to handle different sizes of OOB metadata on drive in the future.
After this patch only OOB metadata equal to 16 bytes is supported.
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current kref implementation around pblk global caches triggers a
false positive on refcount_inc_checked() (when called) as the kref is
initialized to 0. Instead of usint kref_inc() on a 0 reference, which is
in principle correct, use kref_init() to avoid the check. This is also
more explicit about what actually happens on cache creation.
In the process, do a small refactoring to use kref helpers.
Fixes: 1864de94ec "lightnvm: pblk: stop recreating global caches"
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The chunk metadata is allocated with vmalloc, so we need to use
vfree to free it.
Fixes: 090ee26fd5 ("lightnvm: use internal allocation for chunk log page")
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ADDR_POOL_SIZE is not used anymore, so remove the macro.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In a worst-case scenario (random writes), OP% of sectors
in each line will be invalid, and we will then need
to move data out of 100/OP% lines to free a single line.
So, to prevent the possibility of running out of lines,
temporarily block user writes when there is less than
100/OP% free lines.
Also ensure that pblk creation does not produce instances
with insufficient over provisioning.
Insufficient over-provising is not a problem on real hardware,
but often an issue when running QEMU simulations (with few lines).
100 lines is enough to create a sane instance with the standard
(11%) over provisioning.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk's write buffer must guarantee that it respects the device's
constrains for reads (i.e., mw_cunits). This is done by maintaining a
backpointer that updates the L2P table as entries wrap up, making them
point to the media instead of pointing to the write buffer.
This mechanism can race in case that the write thread stalls, as the
write pointer will protect the last written entry, thus disregarding the
read constrains.
This patch adds an extra check on wrap up, making sure that the
threshold is respected at all times, preventing new entries to overwrite
committed data, also in case of write thread stall.
Reported-by: Heiner Litz <hlitz@ucsc.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Heiner Litz <hlitz@ucsc.edu>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When do GC, the number of read/write sectors are determined
by max_write_pgs(see gc_rq preparation in pblk_gc_line_prepare_ws).
Due to max_write_pgs doesn't consider max hw sectors
supported by nvme controller(128K), which leads to GC
tries to read 64 * 4K in one command, and see below error
caused by pblk_bio_map_addr in function pblk_submit_read_gc.
[ 2923.005376] pblk: could not add page to bio
[ 2923.005377] pblk: could not allocate GC bio (18446744073709551604)
Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the too many bad blocks error handling case, we should release all
the allocated resources, otherwise it will cause memory leak.
Fixes: 2deeefc02d ("lightnvm: pblk: fail gracefully on line alloc. failure")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
OCSSD 2.0 defines the amount of data that the host must buffer per chunk
to guarantee reads through the geometry field mw_cunits. This value is
the base that pblk uses to determine the size of its read buffer.
Currently, this size is set to be the closes power-of-2 to mw_cunits
times the number of parallel units available to the pblk instance for
each open line (currently one). When an entry (4KB) is put in the
buffer, the L2P table points to it. As the buffer wraps up, the L2P is
updated to point to addresses on the device, thus guaranteeing mw_cunits
at a chunk level.
However, given that pblk cannot write to the device under ws_min
(normally ws_opt), there might be a window in which the buffer starts
wrapping up and updating L2P entries before the mw_cunits value in a
chunk has been surpassed.
In order not to violate the mw_cunits constrain in this case, account
for ws_opt on the read buffer creation.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk's read/write buffer currently takes a buffer and its size and uses
it to create the metadata around it to use it as a ring buffer. This
puts the responsibility of allocating/freeing ring buffer memory on the
ring buffer user. Instead, move it inside of the ring buffer helpers
(pblk-rb.c). This simplifies creation/destruction routines.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The lightnvm subsystem provides helpers to retrieve chunk metadata,
where the target needs to provide a buffer to store the metadata. An
implicit assumption is that this buffer is contiguous and can be used to
retrieve the data from the device. If the device exposes too many
chunks, then kmalloc might fail, thus failing instance creation.
This patch removes this assumption by implementing an internal buffer in
the lightnvm subsystem to retrieve chunk metadata. Targets can then
use virtual memory allocations. Since this is a target API change, adapt
pblk accordingly.
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pblk should not create a set of global caches every time
a pblk instance is created. The global caches should be
made available only when there is one or more pblk instances.
This patch bundles the global caches together with a kref
keeping track of whether the caches should be available or not.
Also, turn the global pblk lock into a mutex that explicitly
protects the caches (as this was the only purpose of the lock).
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add trace events for logging for line state changes.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce trace points for tracking chunk states in pblk - this is
useful for inspection of the entire state of the drive, and real handy
for both fw and pblk debugging.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Line map bitmap allocations are fairly large and can fail. Allocation
failures are fatal to pblk, stopping the write pipeline. To avoid this,
allocate the bitmaps using a mempool instead.
Mempool allocations never fail if called from a process context,
and pblk *should* only allocate map bitmaps in process context,
but keep the failure handling for robustness sake.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The calculation of pblk->min_write_pgs should only use the optimal
write size attribute provided by the drive, it does not correlate to
the memory page size of the system, which can be smaller or larger
than the LBA size reported.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both NVM_MAX_VLBA and PBLK_MAX_REQ_ADDRS define how many LBAs that
are available in a vector command. pblk uses them interchangeably
in its implementation. Use NVM_MAX_VLBA as the main one and remove
usages of PBLK_MAX_REQ_ADDRS.
Also remove the power representation that only has one user, and
instead calculate it at runtime.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pblk implements two data paths for recovery line state. One for 1.2
and another for 2.0, instead of having pblk implement these, combine
them in the core to reduce complexity and make available to other
targets.
The new interface will adhere to the 2.0 chunk definition,
including managing open chunks with an active write pointer. To provide
this interface, a 1.2 device recovers the state of the chunks by
manually detecting if a chunk is either free/open/close/offline, and if
open, scanning the flash pages sequentially to find the next writeable
page. This process takes on average ~10 seconds on a device with 64 dies,
1024 blocks and 60us read access time. The process can be parallelized
but is left out for maintenance simplicity, as the 1.2 specification is
deprecated. For 2.0 devices, the logic is maintained internally in the
drive and retrieved through the 2.0 interface.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A 1.2 device is able to manage the logical to physical mapping
table internally or leave it to the host.
A target only supports one of those approaches, and therefore must
check on initialization. Move this check to core to avoid each target
implement the check.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't know if a block is closed or not on 1.2 devices, so assume
closed state to make sure that blocks are erased before writing.
Fixes: 32ef9412c1 ("lightnvm: pblk: implement get log report chunk")
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The error messages in pblk does not say which pblk instance that
a message occurred from. Update each error message to reflect the
instance it belongs to, and also prefix it with pblk, so we know
the message comes from the pblk module.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no users of CONFIG_NVM_DEBUG in the LightNVM subsystem. All
users are in pblk. Rename NVM_DEBUG to NVM_PBLK_DEBUG and enable
only for pblk.
Also fix up the CONFIG_NVM_PBLK entry to follow the code style for
Kconfig files.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some devices can expose mw_cunits equal to 0, it can cause the
creation of too small write buffer and cause performance to drop
on write workloads.
Additionally, write buffer size must cover write data requirements,
such as WS_MIN and MW_CUNITS - it must be greater than or equal to
the larger one multiplied by the number of PUs. However, for
performance reasons, use the WS_OPT value to calculation instead of
WS_MIN.
Because the place where buffer size is calculated was changed, this
patch also removes pgs_in_buffer filed in pblk structure.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following sparse warning:
drivers/lightnvm/pblk-init.c:23:14: warning:
symbol 'write_buffer_size' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some cases, users can want set write buffer size manually, e.g. to
adjust it to specific workload. This patch provides the possibility
to set write buffer size via module parameter feature.
Signed-off-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Signed-off-by: Igor Konopko <igor.j.konopko@intel.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Write failures should not happen under normal circumstances,
so in order to bring the chunk back into a known state as soon
as possible, evacuate all the valid data out of the line and let the
fw judge if the block can be written to in the next reset cycle.
Do this by introducing a new gc list for lines with failed writes,
and ensure that the rate limiter allocates a small portion of
the write bandwidth to get the job done.
The lba list is saved in memory for use during gc as we
cannot gurantee that the emeta data is readable if a write
error occurred.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The write error recovery path is incomplete, so rework
the write error recovery handling to do resubmits directly
from the write buffer.
When a write error occurs, the remaining sectors in the chunk are
mapped out and invalidated and the request inserted in a resubmit list.
The writer thread checks if there are any requests to resubmit,
scans and invalidates any lbas that have been overwritten by later
writes and resubmits the failed entries.
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the namespace is unregistered before the LightNVM target is removed
(e.g., on hot unplug) it is too late for the target to store any metadata
on the device - any attempt to write to the device will fail. In this
case, pass on a "gracefull teardown" flag to the target to let it know
when this happens.
In the case of pblk, we pad the open line (close all open chunks) to
improve data retention. In the event of an ungraceful shutdown, avoid
this part and just clean up.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do the check for the chunk state after making sure that the chunk type
is supported.
Fixes: 32ef9412c1 ("lightnvm: pblk: implement get log report chunk")
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bad blocks can grow at runtime. Check that the number of valid blocks in
a line are within the sanity threshold before allocating the line for
new writes.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig