The Cortina Gemini pin controller uses the standard pin control
bindings for muxing functions with groups so these bindings
should be entirely uncontroversial.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are 3 IP blocks pin routes need to be switched, that are
emmc-cmd, spi, i2s. And there are some pins need to be recalced,
which are gpio2c4~gpio2c7 and gpio2d0.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Aspeed AST2500 SoC contains a number of USB controllers:
* USB 1.1 Host Controller
* USB 2.0 Host Controller (x2)
* USB 2.0 Virtual Hub
* USB 2.0 Device Controller
* USB 1.1 HID Controller
The controllers are exposed via two USB ports with functionality muxed
as required. The following table illustrates the relationships between
the ports and the controllers via the mux function names:
Port | USB Version | USB Mode | Mux Function
------|--------------|--------------|-------------
A | 2.0 | Virtual Hub | USB2AD
A | 2.0 | Host | USB2AH
B | 1.1 | HID | USB11BHID
B | 2.0 | Device | USB2BD
B | 2.0 | Host | USB2BH
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The AST2400 contains several USB controllers:
* USB 1.1 Host Controller
* USB 2.0 Host Controller
* USB 2.0 Virtual Hub
* USB 1.1 HID Controller
Pins for three ports are routed to the three controllers such that:
* Port 1 is a dedicated USB 1.1 host port
* Port 2 is shared between the USB 1.1 host and HID controllers
* Port 3 is shared between the USB 2.0 host and Hub controllers
As the pins for port 1 are fixed function there is no associated mux
function or group described in the bindings. Ports 2 and 3 are muxed as
above, and the table below describes the mapping between pinmux function
names and ports:
Port | USB Version | USB Mode | Mux Function
------|--------------|-----------|-------------
1 | 1.1 | Host | -
2 | 1.1 | Host | USB11H2
2 | 1.1 | HID | USB11D1
3 | 2.0 | Host | USB2H1
3 | 2.0 | Device | USB2D1
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports,
IOMUXC1 for A7 ports and IOMUXC DDR for DDR interface.
This patch adds the IOMUXC1 support for A7.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds the remaining pin functions and mux groups.
All unknown and debug functions are omitted. Existing functions
for qpic, sdio, rgmii, rmii, wifi/d are squashed together as
much as possible. And only in case of a clash, the individually
named functions have been kept. The exceptions are:
led0-11
i2s_rx, i2s_tx, i2s_td, i2s_spdif_in, i2s_spdif_out,
smart0-3
Cc: Varadarajan Narayanan <varada@codeaurora.org>
Cc: Ram Chandra Jangir <rjangir@codeaurora.org>
Cc: John Crispin <john@phrozen.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix the documentation build as the docs were moved.
- Correct the UART pin list on the Intell Merrifield.
- Fix pin assignment and number of pins on the Marvell Armada
37xx pin controller.
- Cover the Setzer models in the Chromebook DMI quirk in the
Intel cheryview driver so they start working.
- Add the missing "sim" function to the sunxi driver.
- Fix USB pin definitions on Uniphier Pro4.
- Smatch fix for invalid reference in the zx pin control driver.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZi3joAAoJEEEQszewGV1zVgoQAKejQg9435pCxXVqdKW2319t
RHj4w3qpA8+nIx5qT2GGnxD68/O3RnApB88XBo7ySKQnOVnY2aSQmRWRgJc6jKol
9NYaBHO5h7DUZFNe3GQWq9xiCYryRoaDOyPbuOq99q0fhJLDUnLxxPs7xtEr4+1i
ryni3fujFYDczWDthugaGdTaHsjapl2BM+mL5ZkBDAoS3cNNt3nlsmYy17DHPN6Q
CLfTBVWgbEI37YxjGu3XJdyArYRijEHei8RmRJnWvezrRzHLMkq1NZnpOlkajail
8iW7uvX3af3tQNaAeXdD2WcF9+UmIfFUwY1SDDBMWk+vAzljRiSh5Ug+HuHJO2fq
eQQ/l/nTVFQPKEztFHWWfe6y/ovw49dqhC8E12mkYVrp8+ciaknUUC7xLLNTMVBM
HRawsHtuHxEV6ziK0JHfOwQQdhu/zD3CbIE7s8CEcd+juFrStR95TGHNsd03dH9q
D7/GBrmrHs06Pd8IZ/xdpe3yGhdrd4qknnl5vkDYE5p7EdjtGmYAXR7LARdaDji2
zzs8Hd8Rs0Dam28+5nWVl+aL2vAXMXmNSj28Pp52r4oPl6+61IFxlYJAsVmIJQwd
o6+mMmb2euS664QYG3KvORmlKj+Bw0ii0NTxFmlDI+r8uu1vM4JM3HGh5zmJ2FQD
umL8zl1KUPEUgejAYqug
=Dyh5
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"These are the pin control fixes I have gathered since the return from
my vacation. They boiled in -next a while so let's get them in.
Apart from the documentation build it is purely driver fixes. Which is
nice. The Intel fixes seem kind of important.
- Fix the documentation build as the docs were moved
- Correct the UART pin list on the Intel Merrifield
- Fix pin assignment and number of pins on the Marvell Armada 37xx
pin controller
- Cover the Setzer models in the Chromebook DMI quirk in the Intel
cheryview driver so they start working
- Add the missing "sim" function to the sunxi driver
- Fix USB pin definitions on Uniphier Pro4
- Smatch fix for invalid reference in the zx pin control driver"
* tag 'pinctrl-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: generic: update references to Documentation/pinctrl.txt
pinctrl: intel: merrifield: Correct UART pin lists
pinctrl: armada-37xx: Fix number of pin in south bridge
pinctrl: armada-37xx: Fix the pin 23 on south bridge
pinctrl: cherryview: Add Setzer models to the Chromebook DMI quirk
pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
pinctrl: uniphier: fix USB3 pin assignment for Pro4
pinctrl: zte: fix dereference of 'data' in zx_set_mux()
Update deprecated references to Documentation/pinctrl.txt since it has been
moved to Documentation/driver-api/pinctl.rst.
Signed-off-by: Ludovic Desroches <ludovic.desroches@o2linux.fr>
Fixes: 5a9b73832e ("pinctrl.txt: move it to the driver-api book")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----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=wQ04
-----END PGP SIGNATURE-----
Merge tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"This series is larger than I would like to submit for -rc4. My
original intent were to sent it to either -rc2 or -rc3. Unfortunately,
due to my vacations, I got a lot of pending stuff after my return, and
had to do some biz trips, with prevented me to send this earlier.
Several fixes:
- some fixes at atomisp staging driver
- several gcc 7 warning fixes
- cleanup media SVG files, in order to fix PDF build on some distros
- fix random Kconfig build of venus driver
- some fixes for the venus driver
- some changes from semaphone to mutex in ngene's driver
- some locking fixes at dib0700 driver
- several fixes on ngene's driver and frontends to make it properly
support some new boards added on Kernel 4.13
- some fixes to CEC drivers
- omap_vout: vrfb: convert to dmaengine
- docs-rst: document EBUSY for VIDIOC_S_FMT
Please notice that the big diffstat changes here are at the SVG files.
Visually, the images look the same, but the file size is now a lot
smaller than before, and they don't use some XML tags that would cause
them to be badly parsed by some ImageMagick versions, or to require a
lot of memory by TeTex, with would break PDF output on some
distributions"
* tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (68 commits)
media: atomisp2: array underflow in imx_enum_frame_size()
media: atomisp2: array underflow in ap1302_enum_frame_size()
media: atomisp2: Array underflow in atomisp_enum_input()
media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS
media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
media: venus: don't abuse dma_alloc for non-DMA allocations
media: venus: hfi: fix error handling in hfi_sys_init_done()
media: venus: fix compile-test build on non-qcom ARM platform
media: venus: mark PM functions as __maybe_unused
media: cec-notifier: small improvements
media: pulse8-cec: persistent_config should be off by default
media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES
media: staging: atomisp: array underflow in ioctl
media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
media: svg: avoid too long lines
media: svg files: simplify files
media: selection.svg: simplify the SVG file
media: vimc: set id_table for platform drivers
media: staging: atomisp: disable warnings with cc-disable-warning
media: davinci: variable 'common' set but not used
...
- LP87565: set the proper output level for direction_output.
- stm32: fix the kernel build by selecting the hierarchical
irqdomain symbol properly - this happens to be done in the
pin control framework but whatever, it had dependencies to
GPIO so we need to apply it here.
- Select the hierarchical IRQ domain also for Xgene.
- Fix wakeups to work on MXC.
- Fix up the device tree binding on Exar that went astray,
also add the right bindings.
- Fix the unwanted events for edges from the library.
- Fix the unbalanced chanined IRQ on the Tegra.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZhZFuAAoJEEEQszewGV1zAmIP/iuxZJLY8LM+eJ3FwR8xnzF1
qcOEoSEdKFTJUeZYSRE25LVxxBBGotKEzojLpjaBhQ9ikGnbtWlYv8VDi1SjIGb2
A4r+Ba55/ScOax1oyFJSytdczx8WcxekTfQDs+CtAi5JO+GTNTUw2MYIKo1CjEX4
gYHcLWJ16t0j/S/96Md1q3P2/ynhBcPF3mGoKSJzEW7iTTpLBjIscfiGGQpjX9fA
k9WEhx9XvMLGCBTlrxR3WIzMQlYhfk3uY9C4MqtFiX86R6XsbXm256R4M+l0a31W
I2TzVMJV5nUwIyPg8PpL53s1CiksbT1Yu1HlH01NXUpMxIVwotIRQe5eEKfdTULb
wcLhj32skRGX7Kpz1SXWnm9LsCQlpwAHrZ4e1q509Fc/yFvinS/MJZ5Dtifs83I4
91XN/ZZUfSCAKI3B2MkB1MjwnOG2ifTqtlBLidDaAmxgImsL9mEInlXw2J44M60g
gpBPzggCTph/xZxnorMYmAZ5n/WKjwIX2+iT6qbxuADG4rgcsdM5m1GmRF2/WAxS
VH6jJfT3H8NRZ/lzVLxYjyjmaxdEqZcI4LIBaUhm50dz68SLcbB5H4t50xdMAFVt
PiwkLbQQj//R4iNk4zHuCpsc53kJvL3jRIvtXw/pxlEbXFM7l6ikmxopmmjMAldh
BPulF1CrT9we9Qq+ocbf
=0ZOK
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- LP87565: set the proper output level for direction_output.
- stm32: fix the kernel build by selecting the hierarchical irqdomain
symbol properly - this happens to be done in the pin control
framework but whatever, it had dependencies to GPIO so we need to
apply it here.
- Select the hierarchical IRQ domain also for Xgene.
- Fix wakeups to work on MXC.
- Fix up the device tree binding on Exar that went astray, also add the
right bindings.
- Fix the unwanted events for edges from the library.
- Fix the unbalanced chanined IRQ on the Tegra.
* tag 'gpio-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tegra: fix unbalanced chained_irq_enter/exit
gpiolib: skip unwanted events, don't convert them to opposite edge
gpio: exar: Use correct property prefix and document bindings
gpio: gpio-mxc: Fix: higher 16 GPIOs usable as wake source
gpio: xgene-sb: select IRQ_DOMAIN_HIERARCHY
pinctrl: stm32: select IRQ_DOMAIN_HIERARCHY instead of depends on
gpio: lp87565: Set proper output level and direction for direction_output
MAINTAINERS: Add entry for Whiskey Cove PMIC GPIO driver
This comes a bit later than I planned, and as a consequence is a larger
than it should be.
Most of the changes are devicetree fixes, across lots of platforms:
Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic Meson,
Sigma Desings Tango, Allwinner SUNxi and TI Davinci.
Also across many platforms, I applied an older series of simple randconfig
build fixes. This includes making the CONFIG_MTD_XIP option compile again,
which had been broken for many years and probably has not been missed, but
it felt wrong to just remove it completely.
The only other changes are:
- We enable HWSPINLOCK in defconfig to get some Qualcomm boards
to work out of the box.
- A few regression fixes for Texas Instruments OMAP2+.
- A boot regression fix for the Renesas regulator quirk.
- A suspend/resume fix for Uniphier SoCs, fixing the resume of the
system bus.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a2dO
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This comes a bit later than I planned, and as a consequence is a
larger than it should be.
Most of the changes are devicetree fixes, across lots of platforms:
Renesas, Samsung Exynos, Marvell EBU, TI OMAP, Rockchips, Amlogic
Meson, Sigma Desings Tango, Allwinner SUNxi and TI Davinci.
Also across many platforms, I applied an older series of simple
randconfig build fixes. This includes making the CONFIG_MTD_XIP option
compile again, which had been broken for many years and probably has
not been missed, but it felt wrong to just remove it completely.
The only other changes are:
- We enable HWSPINLOCK in defconfig to get some Qualcomm boards to
work out of the box.
- A few regression fixes for Texas Instruments OMAP2+.
- A boot regression fix for the Renesas regulator quirk.
- A suspend/resume fix for Uniphier SoCs, fixing the resume of the
system bus"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: dts: tango4: Request RGMII RX and TX clock delays
bus: uniphier-system-bus: set up registers when resuming
ARM64: dts: marvell: armada-37xx: Fix the number of GPIO on south bridge
ARM: shmobile: rcar-gen2: Fix deadlock in regulator quirk
arm64: defconfig: enable missing HWSPINLOCK
ARM: pxa: select both FB and FB_W100 for eseries
ARM: ixp4xx: fix ioport_unmap definition
ARM: ep93xx: use ARM_PATCH_PHYS_VIRT correctly
ARM: mmp: mark usb_dma_mask as __maybe_unused
ARM: omap2: mark unused functions as __maybe_unused
ARM: omap1: avoid unused variable warning
ARM: sirf: mark sirfsoc_init_late as __maybe_unused
ARM: ixp4xx: use normal prototype for {read,write}s{b,w,l}
ARM: omap1/ams-delta: warn about failed regulator enable
ARM: rpc: rename RAM_SIZE macro
ARM: w90x900: normalize clk API
ARM: ep93xx: normalize clk API
ARM: dts: sun8i: a83t: Switch to CCU device tree binding macros
arm64: allwinner: sun50i-a64: Correct emac register size
ARM: dts: sunxi: h3/h5: Correct emac register size
...
showed a wrong value, so fix it before it gets copy-pasted
to much.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmEM5wQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVn+B/9Xy9km3t8cFVQ//SjNm1MEfiyVrgCnH6TH
trLit6AKq19LTIfeyI2RQucEXB0Csw2+YNh4q9Td6utnc0S3OpzueFsfKfAD9xif
WpRR6MJjCSlIQfhd09XuKyWoDwwNmnidv+Xd/H3M83dTOzoPmy0aDkn/shc1I+Tw
gL0CbLPz1HuHuG55S5EkxcBNi/Mj34qI5e3O8hrqzpfzmc1CdQ38zblfkiyu94v7
f/sVUv8p2YHyfvIJ1n1DxQx7lvAxGzo3Q7fXqS9D1jJx4iDWWFaraLMPu3NztLcv
1XrawJTdGZ9vTJSmzcEwH7JeAUHX41wIWjf/jEx9iE2R9EY0lyLo
=B0nU
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Pull "Rockchip dts32 fixes for 4.13" from Heiko Stübner:
Fix for the recently added mali dt support. The example
showed a wrong value, so fix it before it gets copy-pasted
to much.
* tag 'v4.13-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: fix mali gpu node on rk3288
dt-bindings: gpu: drop wrong compatible from midgard binding example
- Fix the handling of the scaling_cur_freq cpufreq policy attribute
on x86 systems with the MPERF/APERF registers present to make it
behave more as expected after recent changes (Rafael Wysocki).
- Drop a leftover callback from the intel_pstate driver which also
prevents the cpuinfo_cur_freq cpufreq policy attribute from being
incorrectly exposed when intel_pstate works in the active mode
(Rafael Wysocki).
- Add a missing piece describing the cpuinfo_cur_freq policy
attribute to cpufreq documentation (Rafael Wysocki).
- Fix up a recently added part of the Thunderbolt driver to avoid
aborting system suspends if its mailbox commands time out (Rafael
Wysocki).
- Update device runtime PM framework documentation to reflect the
current behavior of the code (Johan Hovold).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=j2UJ
-----END PGP SIGNATURE-----
Merge tag 'pm-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one introduced recently and one related
to recent changes, fix cpufreq documentation, fix up recently added
code in the Thunderbolt driver and update runtime PM framework
documentation.
Specifics:
- Fix the handling of the scaling_cur_freq cpufreq policy attribute
on x86 systems with the MPERF/APERF registers present to make it
behave more as expected after recent changes (Rafael Wysocki).
- Drop a leftover callback from the intel_pstate driver which also
prevents the cpuinfo_cur_freq cpufreq policy attribute from being
incorrectly exposed when intel_pstate works in the active mode
(Rafael Wysocki).
- Add a missing piece describing the cpuinfo_cur_freq policy
attribute to cpufreq documentation (Rafael Wysocki).
- Fix up a recently added part of the Thunderbolt driver to avoid
aborting system suspends if its mailbox commands time out (Rafael
Wysocki).
- Update device runtime PM framework documentation to reflect the
current behavior of the code (Johan Hovold)"
* tag 'pm-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thunderbolt: icm: Ignore mailbox errors in icm_suspend()
cpufreq: x86: Make scaling_cur_freq behave more as expected
PM / runtime: Document new pm_runtime_set_suspended() constraint
cpufreq: docs: Add missing cpuinfo_cur_freq description
cpufreq: intel_pstate: Drop ->get from intel_pstate structure
The device-specific property should be prefixed with the vendor name,
not "linux,", as Linus Walleij pointed out. Change this and document the
bindings of this platform device.
We didn't ship the old binding in a release yet. So we can still change
it without breaking an official API.
Fixes: 380b1e2f3a ("gpio-exar/8250-exar: Make set of exported GPIOs configurable")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull libata fixes from Tejun Heo:
"Dan found a really old bug where libata hotplug code wasn't sanitizing
index value from userland and may end up indexing with a negative
number. It is scary but fortunately can only be triggered by root.
Other than that, minor fixes"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: fix a couple of doc build warnings
libata: array underflow in ata_find_dev()
ata: sata_rcar: add gen[23] fallback compatibility strings
libata: remove unused rc in ata_eh_handle_port_resume
libata: Cleanup ata_read_log_page()
ata: fix gemini Kconfig dependencies
This patch allows the user to disable write combined mapping
of the efifb framebuffer console using an nowc option.
A customer noticed major slowdowns while logging to the console
with write combining enabled, on other tasks running on the same
CPU. (10x or greater slow down on all other cores on the same CPU
as is doing the logging).
I reproduced this on a machine with dual CPUs.
Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz (6 core)
I wrote a test that just mmaps the pci bar and writes to it in
a loop, while this was running in the background one a single
core with (taskset -c 1), building a kernel up to init/version.o
(taskset -c 8) went from 13s to 133s or so. I've yet to explain
why this occurs or what is going wrong I haven't managed to find
a perf command that in any way gives insight into this.
11,885,070,715 instructions # 1.39 insns per cycle
vs
12,082,592,342 instructions # 0.13 insns per cycle
is the only thing I've spotted of interest, I've tried at least:
dTLB-stores,dTLB-store-misses,L1-dcache-stores,LLC-store,LLC-store-misses,LLC-load-misses,LLC-loads,\mem-loads,mem-stores,iTLB-loads,iTLB-load-misses,cache-references,cache-misses
For now it seems at least a good idea to allow a user to disable write
combining if they see this until we can figure it out.
Note also most users get a real framebuffer driver loaded when kms
kicks in, it just happens on these machines the kernel didn't support
the gpu specific driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
inefficiencies in the on-disk journal device layout. Another that
makes use of the block layer's on-stack plugging when writing the
journal.
- A dm-bufio fix for the blk_status_t conversion that went in during the
merge window.
- A few DM raid fixes that address correctness when suspending the
device and a validation fix for validation that occurs during device
activation.
- A couple DM zoned target fixes. Important one being the fix to not
use GFP_KERNEL in the IO path due to concerns about deadlock in
low-memory conditions (e.g. swap over a DM zoned device, etc).
- A DM DAX device fix to make sure dm_dax_flush() is called if the
underlying DAX device is operating as a write cache.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZe13OAAoJEMUj8QotnQNav/gIAMXMUbXlYHVikVNq+6rNkXRk
FlsltNcJEDeZCit0nJd/2nOWGpssXdz+7cJTUU28Kp+3IscIolSHS51bzfSFI05V
7LbYqEX1EdXkTwEeYfHlAoOexvj4oarpAWWQF/ACU8rHCruaqfqIa57mstxLoyDY
XcxsIY/fds6GZViLB0MD/jBAKaLWX90aFZ9MQcF7AmdpMr56kCO2PUhiqHcrN47t
BjH7E5QSKGl2pMND1bR6pleWFw8HB7h82Qjaasd5bQuVWseQ4u9Illxny6bhhk2E
BiEWjzFvZB+JL1zl7JIXnBjhdmbwgAVvoW6EqHuVzHuR0X8gylBF2gDLnSzUZu4=
=3MxS
-----END PGP SIGNATURE-----
Merge tag 'for-4.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a few DM integrity fixes that improve performance. One that address
inefficiencies in the on-disk journal device layout. Another that
makes use of the block layer's on-stack plugging when writing the
journal.
- a dm-bufio fix for the blk_status_t conversion that went in during
the merge window.
- a few DM raid fixes that address correctness when suspending the
device and a validation fix for validation that occurs during device
activation.
- a couple DM zoned target fixes. Important one being the fix to not
use GFP_KERNEL in the IO path due to concerns about deadlock in
low-memory conditions (e.g. swap over a DM zoned device, etc).
- a DM DAX device fix to make sure dm_dax_flush() is called if the
underlying DAX device is operating as a write cache.
* tag 'for-4.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm, dax: Make sure dm_dax_flush() is called if device supports it
dm verity fec: fix GFP flags used with mempool_alloc()
dm zoned: use GFP_NOIO in I/O path
dm zoned: remove test for impossible REQ_OP_FLUSH conditions
dm raid: bump target version
dm raid: avoid mddev->suspended access
dm raid: fix activation check in validate_raid_redundancy()
dm raid: remove WARN_ON() in raid10_md_layout_to_format()
dm bufio: fix error code in dm_bufio_write_dirty_buffers()
dm integrity: test for corrupted disk format during table load
dm integrity: WARN_ON if variables representing journal usage get out of sync
dm integrity: use plugging when writing the journal
dm integrity: fix inefficient allocation of journal space
- sunxi: Correct time phase settings
- omap_hsmmc: Clean up some dead code
- dw_mmc: Fix message printed for deprecated num-slots DT binding
- dw_mmc: Fix DT documentation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xWHL
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.13-rc1.
I have also included a couple of cleanup patches in this pull request
for OMAP2+, related to the omap_hsmmc driver. The reason is because of
the changes are also depending on OMAP SoC specific code, so this
simplifies how to deal with this.
Summary:
MMC host:
- sunxi: Correct time phase settings
- omap_hsmmc: Clean up some dead code
- dw_mmc: Fix message printed for deprecated num-slots DT binding
- dw_mmc: Fix DT documentation"
* tag 'mmc-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
Documentation: dw-mshc: deprecate num-slots
mmc: dw_mmc: fix the wrong condition check of getting num-slots from DT
mmc: host: omap_hsmmc: remove unused platform callbacks
ARM: OMAP2+: hsmmc.c: Remove dead code
mmc: sunxi: Keep default timing phase settings for new timing mode
Since commit a8636c8964 (PM / Runtime: Don't allow to suspend a
device with an active child) it is no longer permitted to set
RPM_SUSPENDED state for a device with active children unless
power.ignore_children is set.
Update the documentation to reflect this.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a description of the cpuinfo_cur_freq policy attribute in sysfs
to the cpufreq documentation under Documentation/admin-guide/pm/ as
it is missing after commit 2a0e492798 (cpufreq: User/admin
documentation update and consolidation) that overlooked it.
Fixes: 2a0e492798 (cpufreq: User/admin documentation update and consolidation)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
dwmmc host driver already deprecate it in the driver
but didn't modify the documentation to reflect the fact.
This patch deprecates it and clean up num-slots from the
examples of all variant host drivers.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: d30a8f7bdf ("mmc: dw_mmc: deprecated the "num-slots" property")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Sending patches with SVG files via e-mail has a drawback: line
size could be bigger than 998, with is the limit given by
RFC 5322[1]. So, we need to enforce a lower limit, in order to
allow those patches to be properly reviewed.
[1] https://tools.ietf.org/html/rfc5322#section-2.1.1
So, use this small Perl script to limit columns size to ~900.
use Text::Wrap;
$Text::Wrap::columns = 900;
$t.=$_ while (<>);
print wrap("","",$t);
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Debian's ImageMagick is currently unable to decode those
images. Use scour to simplify the SVG, and provide only
one font type, in order to make it more palatable.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This file is too big, with cause it to require a lot
of memory when parsed by texlive.
Optimize it, in order to avoid the need of touching at
main_memory at texmf.cnf.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Bumo dm-raid target version to 1.12.1 to reflect that commit cc27b0c78c
("md: fix deadlock between mddev_suspend() and md_write_start()") is
available.
This version change allows userspace to detect that MD fix is available.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
huge at all, a revert of a patch that turned out to break things, a fix
up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition
correct, and a few minor serial driver fixes for reported issues.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWXMebA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn9MgCdGsIEQlTvTeG4QikxUPB7dkEJQacAoLWOKJzQ
A65mBAeOfiJztczi8uo4
=KEXp
-----END PGP SIGNATURE-----
Merge tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
huge at all, a revert of a patch that turned out to break things, a
fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
definition correct, and a few minor serial driver fixes for reported
issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix TIOCGPTPEER ioctl definition
tty: hide unused pty_get_peer function
tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
serial: imx: Prevent TX buffer PIO write when a DMA has been started
Revert "serial: imx-serial - move DMA buffer configuration to DT"
serial: sh-sci: Uninitialized variables in sysfs files
serial: st-asc: Potential error pointer dereference
Here are some small char and misc driver fixes for 4.13-rc2. All fix
reported problems with 4.13-rc1 or older kernels (like the binder
fixes). Full details in the shortlog.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWXMc8Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymePwCdEFD40T8GU7dnOHWVMkpX0wuNlOYAnijkamLl
o41CVfvi/9Zwz6msMHX7
=HmjL
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 4.13-rc2. All fix
reported problems with 4.13-rc1 or older kernels (like the binder
fixes). Full details in the shortlog.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
w1: omap-hdq: fix error return code in omap_hdq_probe()
regmap: regmap-w1: Fix build troubles
w1: Fix slave count on 1-Wire bus (resend)
mux: mux-core: unregister mux_class in mux_exit()
mux: remove the Kconfig question for the subsystem
nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse
drivers/fsi: fix fsi_slave_mode prototype
fsi: core: register with postcore_initcall
thunderbolt: Correct access permissions for active NVM contents
vmbus: re-enable channel tasklet
spmi: pmic-arb: Always allocate ppid_to_apid table
MAINTAINERS: Add entry for SPMI subsystem
spmi: Include OF based modalias in device uevent
binder: Use wake up hint for synchronous transactions.
binder: use group leader instead of open thread
Revert "android: binder: Sanity check at binder ioctl"
Pull networking fixes from David Miller:
1) BPF verifier signed/unsigned value tracking fix, from Daniel
Borkmann, Edward Cree, and Josef Bacik.
2) Fix memory allocation length when setting up calls to
->ndo_set_mac_address, from Cong Wang.
3) Add a new cxgb4 device ID, from Ganesh Goudar.
4) Fix FIB refcount handling, we have to set it's initial value before
the configure callback (which can bump it). From David Ahern.
5) Fix double-free in qcom/emac driver, from Timur Tabi.
6) A bunch of gcc-7 string format overflow warning fixes from Arnd
Bergmann.
7) Fix link level headroom tests in ip_do_fragment(), from Vasily
Averin.
8) Fix chunk walking in SCTP when iterating over error and parameter
headers. From Alexander Potapenko.
9) TCP BBR congestion control fixes from Neal Cardwell.
10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.
11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
Wang.
12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
from Gao Feng.
13) Cannot release skb->dst in UDP if IP options processing needs it.
From Paolo Abeni.
14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
Levin and myself.
15) Revert some rtnetlink notification changes that are causing
regressions, from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
net: bonding: Fix transmit load balancing in balance-alb mode
rds: Make sure updates to cp_send_gen can be observed
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
net: dsa: b53: Add missing ARL entries for BCM53125
bpf: more tests for mixed signed and unsigned bounds checks
bpf: add test for mixed signed and unsigned bounds checks
bpf: fix up test cases with mixed signed/unsigned bounds
bpf: allow to specify log level and reduce it for test_verifier
bpf: fix mixed signed/unsigned derived min/max value bounds
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: tehuti: don't process data if it has not been copied from userspace
Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
NET: dwmac: Make dwmac reset unconditional
net: Zero terminate ifr_name in dev_ifname().
wireless: wext: terminate ifr name coming from userspace
netfilter: fix netfilter_net_init() return
...
Add SoC specific compatibility strings to the Broadcom DTE
based PTP clock binding document.
Fixed the document heading and node name.
Fixes: 80d6076140 ("dt-binding: ptp: add bindings document for dte based ptp clock")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dma-mask property is broken and was removed in the device trees
having a safexcel-eip197 node and in the safexcel cryptographic
driver. This patch removes the dma-mask property from the documentation
as well.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZapWhAAoJEHm+PkMAQRiGKb0IAJM6b7SbWaw69Og7+qiFB+zZ
xp29iXqbE9fPISC6a5BRQV1ONjeDM6opGixGHqGC8Hla6k2IYz25VDNoF8wd0MXN
cz/Ih20vd3C5afxXGe5cTT8lsPAlV0mWXxForlu6j8jPeL62FPfq6RhEkw7AcrYL
yfYy3k3qSdOrrvBdII0WAAUi46UfIs+we9BQgbsMbkHOiqV2K0MOrzKE84Xbgepq
RAy2xg6P4b4+hTx8xTrYc1MXwpnqjRc0oJ08gdmiwW3AOOU7LxYFn7zDkLPWi9Rr
g4x6r4YhBTGxT4wNvovLIiqd9QFs//dMCuPWYwEtTICG48umIqqq24beQ0mvCdg=
=08Ic
-----END PGP SIGNATURE-----
Merge tag 'v4.13-rc1' into patchwork
Linux v4.13-rc1
* tag 'v4.13-rc1': (11136 commits)
Linux v4.13-rc1
random: reorder READ_ONCE() in get_random_uXX
random: suppress spammy warnings about unseeded randomness
replace incorrect strscpy use in FORTIFY_SOURCE
kmod: throttle kmod thread limit
kmod: add test driver to stress test the module loader
MAINTAINERS: give kmod some maintainer love
xtensa: use generic fb.h
fault-inject: add /proc/<pid>/fail-nth
fault-inject: simplify access check for fail-nth
fault-inject: make fail-nth read/write interface symmetric
fault-inject: parse as natural 1-based value for fail-nth write interface
fault-inject: automatically detect the number base for fail-nth write interface
kernel/watchdog.c: use better pr_fmt prefix
MAINTAINERS: move the befs tree to kernel.org
lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
mm: fix overflow check in expand_upwards()
ubifs: Set double hash cookie also for RENAME_EXCHANGE
ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs
ubifs: Don't leak kernel memory to the MTD
...
As the comments from Heiko Stuebner <heiko@sntech.de> that compatible
should not contain any placeholders, this patch fix it for rk3228 SoC.
Note that this is a fix for v4.13, due to fixing the current non-standard
binding name that should not become part of an official kernel release.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a3015affdf as there
are complaints that it is incorrect.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Nandor Han <nandor.han@ge.com>
Cc: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
The binding rightfully only specifies compatibles for actual implementations
and not for the whole family. In the example an arm,mali-midgard slipped
through from downstream devicetrees though. So drop that to not confuse
people reading (or copying) that example.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Commit 07d4510f52 ("dt-bindings: net: bgmac: add bindings documentation for
bgmac") added both brcm,amac-nsp.txt and brcm,bgmac-nsp.txt. The former is
actually the one that got updated and is in use by the bgmac driver while the
latter is duplicating the former and is not used nor updated.
Fixes: 07d4510f52 ("dt-bindings: net: bgmac: add bindings documentation for bgmac")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Specifying IDM register space in DT is not mendatory for SoCs
where firmware takes care of IDM operations. This patch updates
BGMAC driver's DT binding documentation indicating the same.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Oza Oza <oza.oza@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
without incorporating them into the Sphinx tree. The hope is to bring some
uniformity to kernel documentation and, perhaps more importantly, have our
existing docs serve as an example of the desired formatting for those that
will be added later.
-----BEGIN PGP SIGNATURE-----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=HvQS
-----END PGP SIGNATURE-----
Merge tag 'standardize-docs' of git://git.lwn.net/linux
Pull documentation format standardization from Jonathan Corbet:
"This series converts a number of top-level documents to the RST format
without incorporating them into the Sphinx tree. The hope is to bring
some uniformity to kernel documentation and, perhaps more importantly,
have our existing docs serve as an example of the desired formatting
for those that will be added later.
Mauro has gone through and fixed up a lot of top-level documentation
files to make them conform to the RST format, but without moving or
renaming them in any way. This will help when we incorporate the ones
we want to keep into the Sphinx doctree, but the real purpose is to
bring a bit of uniformity to our documentation and let the top-level
docs serve as examples for those writing new ones"
* tag 'standardize-docs' of git://git.lwn.net/linux: (84 commits)
docs: kprobes.txt: Fix whitespacing
tee.txt: standardize document format
cgroup-v2.txt: standardize document format
dell_rbu.txt: standardize document format
zorro.txt: standardize document format
xz.txt: standardize document format
xillybus.txt: standardize document format
vfio.txt: standardize document format
vfio-mediated-device.txt: standardize document format
unaligned-memory-access.txt: standardize document format
this_cpu_ops.txt: standardize document format
svga.txt: standardize document format
static-keys.txt: standardize document format
smsc_ece1099.txt: standardize document format
SM501.txt: standardize document format
siphash.txt: standardize document format
sgi-ioc4.txt: standardize document format
SAK.txt: standardize document format
rpmsg.txt: standardize document format
robust-futexes.txt: standardize document format
...
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
Pull MIPS updates from Ralf Baechle:
"Boston platform support:
- Document DT bindings
- Add CLK driver for board clocks
CM:
- Avoid per-core locking with CM3 & higher
- WARN on attempt to lock invalid VP, not BUG
CPS:
- Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6
- Prevent multi-core with dcache aliasing
- Handle cores not powering down more gracefully
- Handle spurious VP starts more gracefully
DSP:
- Add lwx & lhx missaligned access support
eBPF:
- Add MIPS support along with many supporting change to add the
required infrastructure
Generic arch code:
- Misc sysmips MIPS_ATOMIC_SET fixes
- Drop duplicate HAVE_SYSCALL_TRACEPOINTS
- Negate error syscall return in trace
- Correct forced syscall errors
- Traced negative syscalls should return -ENOSYS
- Allow samples/bpf/tracex5 to access syscall arguments for sane
traces
- Cleanup from old Kconfig options in defconfigs
- Fix PREF instruction usage by memcpy for MIPS R6
- Fix various special cases in the FPU eulation
- Fix some special cases in MIPS16e2 support
- Fix MIPS I ISA /proc/cpuinfo reporting
- Sort MIPS Kconfig alphabetically
- Fix minimum alignment requirement of IRQ stack as required by
ABI / GCC
- Fix special cases in the module loader
- Perform post-DMA cache flushes on systems with MAARs
- Probe the I6500 CPU
- Cleanup cmpxchg and add support for 1 and 2 byte operations
- Use queued read/write locks (qrwlock)
- Use queued spinlocks (qspinlock)
- Add CPU shared FTLB feature detection
- Handle tlbex-tlbp race condition
- Allow storing pgd in C0_CONTEXT for MIPSr6
- Use current_cpu_type() in m4kc_tlbp_war()
- Support Boston in the generic kernel
Generic platform:
- yamon-dt: Pull YAMON DT shim code out of SEAD-3 board
- yamon-dt: Support > 256MB of RAM
- yamon-dt: Use serial* rather than uart* aliases
- Abstract FDT fixup application
- Set RTC_ALWAYS_BCD to 0
- Add a MAINTAINERS entry
core kernel:
- qspinlock.c: include linux/prefetch.h
Loongson 3:
- Add support
Perf:
- Add I6500 support
SEAD-3:
- Remove GIC timer from DT
- Set interrupt-parent per-device, not at root node
- Fix GIC interrupt specifiers
SMP:
- Skip IPI setup if we only have a single CPU
VDSO:
- Make comment match reality
- Improvements to time code in VDSO"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits)
locking/qspinlock: Include linux/prefetch.h
MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
MIPS: Fix minimum alignment requirement of IRQ stack
MIPS: generic: Support MIPS Boston development boards
MIPS: DTS: img: Don't attempt to build-in all .dtb files
clk: boston: Add a driver for MIPS Boston board clocks
dt-bindings: Document img,boston-clock binding
MIPS: Traced negative syscalls should return -ENOSYS
MIPS: Correct forced syscall errors
MIPS: Negate error syscall return in trace
MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select
MIPS16e2: Provide feature overrides for non-MIPS16 systems
MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo
MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions
MIPS: MIPS16e2: Identify ASE presence
MIPS: VDSO: Fix a mismatch between comment and preprocessor constant
MIPS: VDSO: Add implementation of gettimeofday() fallback
MIPS: VDSO: Add implementation of clock_gettime() fallback
MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse()
MIPS: Use current_cpu_type() in m4kc_tlbp_war()
...
Common:
- add uevents for VM creation/destruction
- annotate and properly access RCU-protected objects
s390:
- rename IOCTL added in the first v4.13 merge
x86:
- emulate VMLOAD VMSAVE feature in SVM
- support paravirtual asynchronous page fault while nested
- add Hyper-V userspace interfaces for better migration
- improve master clock corner cases
- extend internal error reporting after EPT misconfig
- correct single-stepping of emulated instructions in SVM
- handle MCE during VM entry
- fix nVMX VM entry checks and nVMX VMCS shadowing
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJZaOm6AAoJEED/6hsPKofoqO8H/3breVIyVv9mwg7A5+o+6LTq
GzV/YXHSC8NtfxZn8ViS/TCziYiBSFv7XiPSodkXbOgYSz8Yya5x9D+dbEH+xgG7
l+LsZEqdSFbHCkvKrMiwSsoXtsT5WygA56+KZiBmu8cvlwqSyXWHFn3ZJ1wKzGq/
zivlkfCoh2m6bGdNmrG9pHUSgxvDh94pXesaVBKy4hgeovY1qjzby3Lo+HuIUzai
exuEU1EKRlUIfLK1B2Anp5IIv5Q1lFnMSvD6YSiWYywZb95dN/adsX1bv+MKeOdt
TIAgotsWjaAuT9JolAJjfVPHG0+uMBMsWg4Zh9Ra/gPPaSh3KEC2h1++zEYKjvw=
=1zII
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Radim Krčmář:
"Second batch of KVM updates for v4.13
Common:
- add uevents for VM creation/destruction
- annotate and properly access RCU-protected objects
s390:
- rename IOCTL added in the first v4.13 merge
x86:
- emulate VMLOAD VMSAVE feature in SVM
- support paravirtual asynchronous page fault while nested
- add Hyper-V userspace interfaces for better migration
- improve master clock corner cases
- extend internal error reporting after EPT misconfig
- correct single-stepping of emulated instructions in SVM
- handle MCE during VM entry
- fix nVMX VM entry checks and nVMX VMCS shadowing"
* tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
kvm: x86: hyperv: make VP_INDEX managed by userspace
KVM: async_pf: Let guest support delivery of async_pf from guest mode
KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf
KVM: async_pf: Add L1 guest async_pf #PF vmexit handler
KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list
kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2
KVM: x86: make backwards_tsc_observed a per-VM variable
KVM: trigger uevents when creating or destroying a VM
KVM: SVM: Enable Virtual VMLOAD VMSAVE feature
KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition
KVM: SVM: Rename lbr_ctl field in the vmcb control area
KVM: SVM: Prepare for new bit definition in lbr_ctl
KVM: SVM: handle singlestep exception when skipping emulated instructions
KVM: x86: take slots_lock in kvm_free_pit
KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition
kvm: vmx: Properly handle machine check during VM-entry
KVM: x86: update master clock before computing kvmclock_offset
kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields
kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls
kvm: nVMX: Validate the I/O bitmaps on nested VM-entry
...
Add fallback compatibility string for R-Car Gen 2 and 3.
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge even more updates from Andrew Morton:
- a few leftovers
- fault-injector rework
- add a module loader test driver
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kmod: throttle kmod thread limit
kmod: add test driver to stress test the module loader
MAINTAINERS: give kmod some maintainer love
xtensa: use generic fb.h
fault-inject: add /proc/<pid>/fail-nth
fault-inject: simplify access check for fail-nth
fault-inject: make fail-nth read/write interface symmetric
fault-inject: parse as natural 1-based value for fail-nth write interface
fault-inject: automatically detect the number base for fail-nth write interface
kernel/watchdog.c: use better pr_fmt prefix
MAINTAINERS: move the befs tree to kernel.org
lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
mm: fix overflow check in expand_upwards()
fail-nth interface is only created in /proc/self/task/<current-tid>/.
This change also adds it in /proc/<pid>/.
This makes shell based tool a bit simpler.
$ bash -c "builtin echo 100 > /proc/self/fail-nth && exec ls /"
Link: http://lkml.kernel.org/r/1491490561-10485-6-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The read interface for fail-nth looks a bit odd. Read from this file
returns "NYYYY..." or "YYYYY..." (this makes me surprise when cat this
file). Because there is no EOF condition. The first character
indicates current->fail_nth is zero or not, and then current->fail_nth
is reset to zero.
Just returning task->fail_nth value is more natural to understand.
Link: http://lkml.kernel.org/r/1491490561-10485-4-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhiyong Tao