mirror of https://gitee.com/openkylin/linux.git
723 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Hannes Reinecke
|
3273c91bbd |
scsi: zfcp: Do not set COMMAND_COMPLETE
COMMAND_COMPLETE is defined as '0', and it is a SCSI parallel message to boot. So drop the call to set_msg_byte(). Link: https://lore.kernel.org/r/20210113090500.129644-15-hare@suse.de Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Linus Torvalds
|
60f7c503d9 |
SCSI misc on 20201216
This series consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w hwhOv6Uto89gLCWSEz8= =KUPT -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ... |
|
|
Linus Torvalds
|
ac7ac4618c |
for-5.11/block-2020-12-14
-----BEGIN PGP SIGNATURE-----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=zo4w
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Another series of killing more code than what is being added, again
thanks to Christoph's relentless cleanups and tech debt tackling.
This contains:
- blk-iocost improvements (Baolin Wang)
- part0 iostat fix (Jeffle Xu)
- Disable iopoll for split bios (Jeffle Xu)
- block tracepoint cleanups (Christoph Hellwig)
- Merging of struct block_device and hd_struct (Christoph Hellwig)
- Rework/cleanup of how block device sizes are updated (Christoph
Hellwig)
- Simplification of gendisk lookup and removal of block device
aliasing (Christoph Hellwig)
- Block device ioctl cleanups (Christoph Hellwig)
- Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)
- Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)
- sbitmap improvements (Pavel Begunkov)
- Hybrid polling fix (Pavel Begunkov)
- bvec iteration improvements (Pavel Begunkov)
- Zone revalidation fixes (Damien Le Moal)
- blk-throttle limit fix (Yu Kuai)
- Various little fixes"
* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
blk-mq: fix msec comment from micro to milli seconds
blk-mq: update arg in comment of blk_mq_map_queue
blk-mq: add helper allocating tagset->tags
Revert "block: Fix a lockdep complaint triggered by request queue flushing"
nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
block: disable iopoll for split bio
block: Improve blk_revalidate_disk_zones() checks
sbitmap: simplify wrap check
sbitmap: replace CAS with atomic and
sbitmap: remove swap_lock
sbitmap: optimise sbitmap_deferred_clear()
blk-mq: skip hybrid polling if iopoll doesn't spin
blk-iocost: Factor out the base vrate change into a separate function
blk-iocost: Factor out the active iocgs' state check into a separate function
blk-iocost: Move the usage ratio calculation to the correct place
blk-iocost: Remove unnecessary advance declaration
blk-iocost: Fix some typos in comments
blktrace: fix up a kerneldoc comment
block: remove the request_queue to argument request based tracepoints
...
|
|
|
Christoph Hellwig
|
a54895fa05 |
block: remove the request_queue to argument request based tracepoints
The request_queue can trivially be derived from the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
|
|
Vineeth Vijayan
|
5db44cfe2e |
s390/zfcp: remove pm support from zfcp driver
As part of removing the power management support from s390 arch, remove PM callbacks from the scsi/zfcp driver. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
|
|
Julian Wiedmann
|
d901963174 |
scsi: zfcp: Handle event-lost notification for Version Change events
As recovery for a lost Version Change event, trigger an Exchange Config Data cmd to retrieve the current FW version. Doing so requires process context (as eg. zfcp_qdio_sbal_get() might need to sleep), so defer from tasklet context into a work item. Link: https://lore.kernel.org/r/297c7be2944c3714863fcd22d531d910312d29f0.1603908167.git.bblock@linux.ibm.com Suggested-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Julian Wiedmann
|
a6c37abe69 |
scsi: zfcp: Process Version Change events
Handle notifications for a concurrent change of the FCP Channel firmware. Update the relevant user-visible fields to provide accurate data. Link: https://lore.kernel.org/r/d2c7bc57c6cf1b65eabbf7a5d0e3927b9f65647f.1603908167.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Julian Wiedmann
|
efd321768d |
scsi: zfcp: Clarify & assert the stat_lock locking in zfcp_qdio_send()
Explain why the plain spin_lock() suffices in current code, even when the stat_lock is also used by zfcp_qdio_int_req() in tasklet context. We could also promote the spin_lock() to a spin_lock_irqsave(), but that would just obfuscate the locking even further. Link: https://lore.kernel.org/r/b023b1472630f4bf9fce580577d7bb49de89ccbf.1603908167.git.bblock@linux.ibm.com Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Vasily Gorbik
|
84e7b4169f |
scsi: zfcp: Remove orphaned function declarations
drivers/s390/scsi/zfcp_ext.h: zfcp_sg_free_table - only declaration left after commit |
|
|
Julian Wiedmann
|
0b524abc2d |
scsi: zfcp: Lift Input Queue tasklet from qdio
Shift the IRQ tasklet processing from the qdio layer into zfcp. This will allow for a good amount of cleanups in qdio, and provides future opportunity to improve the IRQ processing inside zfcp. We continue to use the qdio layer's internal tasklet/timer mechanism (ie. scan_threshold etc) to check for Request Queue completions. Initially we planned to check for such completions after inspecting the Response Queue - this should typically work, but there's a theoretical race where the device only presents the Request Queue completions _after_ all Response Queue processing has finished. If the Request Queue is then also _completely_ full, we could send no further IOs and thus get no interrupt that would trigger an inspection of the Request Queue. So for now stick to the old model, where we can trust that such a race would be recovered by qdio's internal timer. Code-flow wise, this establishes two levels of control: 1. The qdio layer will only deliver IRQs to the device driver if the QDIO_IRQ_DISABLED flag is cleared. zfcp manages this through qdio_start_irq() / qdio_stop_irq(). The initial state is DISABLED, and zfcp_qdio_open() schedules zfcp's IRQ tasklet once during startup to explicitly enable IRQ delivery. 2. The zfcp tasklet is initialized with tasklet_disable(), and only gets enabled once we open the qdio device. When closing the qdio device, we must disable the tasklet _before_ disabling IRQ delivery (otherwise a concurrently running tasklet could re-enable IRQ delivery after we disabled it). A final tasklet_kill() during teardown ensures that no lingering tasklet_schedule() is still accessing the tasklet structure. Link: https://lore.kernel.org/r/94a765211c48b74a7b91c5e60b158de01db98d43.1603908167.git.bblock@linux.ibm.com Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Linus Torvalds
|
847d4287a0 |
s390 updates for the 5.10 merge window
- Remove address space overrides using set_fs(). - Convert to generic vDSO. - Convert to generic page table dumper. - Add ARCH_HAS_DEBUG_WX support. - Add leap seconds handling support. - Add NVMe firmware-assisted kernel dump support. - Extend NVMe boot support with memory clearing control and addition of kernel parameters. - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support. - Add ECC secure private keys support. - Add KASan support for running protected virtualization host with 4-level paging. - Utilize destroy page ultravisor call to speed up secure guests shutdown. - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code. - Various checksum improvements. - Other small various fixes and improvements all over the code. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl+JXIIACgkQjYWKoQLX FBgIWAf9FKpnIsy/aNI2RpvojfySEhgH3T5zxGDTjghCSUQzAu0hIBPKhQOs/YfV /apflXxNPneq7FsQPPpNqfdz2DXQrtgDfecK+7GyEVoOawFArgxiwP+tDVy4dmPT 30PNfr+BpGs7GjKuj33fC0c5U33HYvKzUGJn/GQB2Fhw+5tTDxxCubuS1GVR9iuw /U1cQhG4KN0lwEeF2gO7BWWgqTH9C1t60+WzOQhIAbdvgtBRr1ctGu//F5S94BYL NBw5Wxb9vUHrMm2mL0n8bi16hSn2MWHmAMQLkxPXI2osBYun3soaHUWFSA3ryFMw 4BGU+g7T66Pv3ZmLP4jH5UGrn8HWmg== =4zdC -----END PGP SIGNATURE----- Merge tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ... |
|
|
Julian Wiedmann
|
d251193d17 |
scsi: zfcp: Clarify access to erp_action in zfcp_fsf_req_complete()
While reviewing commit
|
|
|
Julian Wiedmann
|
addf137296 |
scsi: zfcp: Use list_first_entry_or_null() in zfcp_erp_thread()
Use the right helper to avoid poking around in the list's internals. Link: https://lore.kernel.org/r/ed669555c73aab95b29444c10066f492c0c43391.1599765652.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Julian Wiedmann
|
180a4c42e5 |
s390/qdio: always use dev_name() for device name in QIB
Passing a custom name from the device driver is nice - but in practice it's only zfcp who has been using this. So we might as well hard-code a naming scheme in the qdio layer, so that qeth also benefits from it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Steffen Maier
|
2d9a2c5f58 |
scsi: zfcp: Fix use-after-free in request timeout handlers
Before v4.15 commit |
|
|
Linus Torvalds
|
dfdf16ecfd |
SCSI misc on 20200806
This series consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache]). Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8 ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm 4W/LDptarpTiDI3NuDc= =4b0W -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ... |
|
|
Julian Wiedmann
|
c3bfffa5ec |
scsi: zfcp: Avoid benign overflow of the Request Queue's free-level
zfcp_qdio_send() and zfcp_qdio_int_req() run concurrently, adding and completing SBALs on the Request Queue. There's a theoretical race where zfcp_qdio_int_req() completes a number of SBALs & increments the queue's free-level _before_ zfcp_qdio_send() was able to decrement it. This can cause ->req_q_free to momentarily hold a value larger than QDIO_MAX_BUFFERS_PER_Q. Luckily zfcp_qdio_send() is always called under ->req_q_lock, and all readers of the free-level also take this lock. So we can trust that zfcp_qdio_send() will clean up such a temporary overflow before anyone can actually observe it. But it's still confusing and annoying to worry about. So adjust the code to avoid this race. Link: https://lore.kernel.org/r/7f61f59a1f8db270312e64644f9173b8f1ac895f.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Julian Wiedmann
|
6bcb7c171a |
scsi: zfcp: Replace open-coded list move
Instead of manually moving each element of the unit and port lists into our temporary on-stack lists, splice them over in one go. Link: https://lore.kernel.org/r/cacb179f49ece50fd4dce119c61252d632cdc1d4.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Julian Wiedmann
|
b43cdb5ac8 |
scsi: zfcp: Clean up zfcp_erp_action_ready()
We already maintain a pointer to act->adapter. Use it consistently to avoid any confusion about whose ->erp_ready_head and ->erp_ready_wq we are accessing. Link: https://lore.kernel.org/r/d1bb04322f240dee32f4c4a551bc93bc736f4b01.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Julian Wiedmann
|
459ad085d8 |
scsi: zfcp: Fix an outdated comment for zfcp_qdio_send()
zfcp no longer uses the qdio PCI flag, update the comment.
Link: https://lore.kernel.org/r/6717c26fc986bff8776d110e27c199b523684c63.1593780621.git.bblock@linux.ibm.com
Fixes:
|
|
|
George Spelvin
|
0cd0e57ec8 |
scsi: zfcp: Use prandom_u32_max() for backoff
We don't need crypto-grade random numbers for randomized backoffs. Instead use prandom_u32_max(ep_ro) which generates a pseudo-random number uniformly distributed in the interval [0, ep_ro). Link: https://lore.kernel.org/r/8fc7c4c4069ff1783f4a9ccd84a923f581a09ec5.1593780621.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: George Spelvin <lkml@sdf.org> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Steffen Maier
|
936e6b85da |
scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action
Suppose that, for unrelated reasons, FSF requests on behalf of recovery are very slow and can run into the ERP timeout. In the case at hand, we did adapter recovery to a large degree. However due to the slowness a LUN open is pending so the corresponding fc_rport remains blocked. After fast_io_fail_tmo we trigger close physical port recovery for the port under which the LUN should have been opened. The new higher order port recovery dismisses the pending LUN open ERP action and dismisses the pending LUN open FSF request. Such dismissal decouples the ERP action from the pending corresponding FSF request by setting zfcp_fsf_req->erp_action to NULL (among other things) [zfcp_erp_strategy_check_fsfreq()]. If now the ERP timeout for the pending open LUN request runs out, we must not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a problem since v4.15 commit |
|
|
Benjamin Block
|
d0dff2ac98 |
scsi: zfcp: Move allocation of the shost object to after xconf- and xport-data
At the moment we allocate and register the Scsi_Host object corresponding to a zfcp adapter (FCP device) very early in the life cycle of the adapter - even before we fully discover and initialize the underlying firmware/hardware. This had the advantage that we could already use the Scsi_Host object, and fill in all its information during said discover and initialize. Due to commit |
|
|
Benjamin Block
|
71159b6ecb |
scsi: zfcp: Fence early sysfs interfaces for accesses of shost objects
When setting an adapter online for the first time, we also create a couple of entries for it in the sysfs device tree. This is also true even if the adapter has not yet ever gone successfully through exchange config and exchange port data. When moving the scsi host object allocation and registration to after the first exchange config and exchange port data, this make the `port_rescan` attribute susceptible to invalid pointer-dereferences of the shost field before the adapter is fully initialized. When written to, it schedules a `scan_work` item that will in turn make use of the associated fibre channel host object to check the topology used for this FCP device. Because scanning for remote ports can't be done successfully without completing exchange config and exchange port data first, we can simply fence `port_rescan`, and so prevent the illegal access. As with cases where we can't get a reference to the adapter, we also return -ENODEV here. Applications need to handle that errno today already. After a successful allocation of the scsi host object nothing changes in the work flow. Link: https://lore.kernel.org/r/ef65366d309993ca91b6917727590ca7ca166c8f.1588956679.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Benjamin Block
|
971f2abb4c |
scsi: zfcp: Fence adapter status propagation for common statuses
Common status flags that all main objects - adapter, port, and unit - support are propagated to sub-objects when set or cleared. For instance, when setting the status ZFCP_STATUS_COMMON_ERP_INUSE for an adapter object, we will propagate this to all its child ports and units - same for when clearing a common status flag. Units of an adapter object are enumerated via __shost_for_each_device() over the scsi host object of the corresponding adapter. Once we move the scsi host object allocation and registration to after the first exchange config and exchange port data, this won't be possible for cases where we set or clear common statuses during the very first adapter recovery. But since we won't have any port or unit objects yet at that point of time, we can just fence the status propagation for cases where the scsi host object is not yet set in the adapter object. It won't change any effective status propagations, but will prevent us from dereferencing invalid pointers. For any later point in the work flow the scsi host object will be set and thus nothing is changed then. Link: https://lore.kernel.org/r/f51fe5f236a1e3d1ce53379c308777561bfe35e1.1588956679.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Benjamin Block
|
ac007adc4d |
scsi: zfcp: Move p-t-p port allocation to after xport data
When doing the very first adapter recovery - initialization - for a FCP device in a point-to-point topology we also allocate the port object corresponding to the attached remote port, and trigger a port recovery for it that will run after the adapter recovery finished. Right now this happens right after we finished with the exchange config data command, and uses the fibre channel host object corresponding to the FCP device to determine whether a point-to-point topology is used. When moving the scsi host object allocation and registration - and thus also the fibre channel host object allocation - to after the first exchange config and exchange port data, this use of the fc_host object is not possible anymore at that point in the work flow. But the allocation and recovery trigger doesn't have notable side-effects on the following exchange port data processing, so we can move those to after xport data, and thus also to after the scsi host object allocation, once we move it. Then the fc_host object can be used again, like it is now. For any further adapter recoveries this doesn't change anything, because at that point the port object already exists and recovery is triggered elsewhere for existing port objects. Link: https://lore.kernel.org/r/73e5d4ac21e2b37bf0c3ca8e530bc5a5c6e74f8f.1588956679.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Benjamin Block
|
990486f3a8 |
scsi: zfcp: Fence fc_host updates during link-down handling
When receiving a notification that a FCP device lost its local link we usually update the fibre channel host object which represents that FCP device to reflect that. This notification/information can also surface when the FCP device is running through adapter recovery (exchange config and exchange port data return incomplete). When moving the scsi host object allocation and registration - and thus also the fibre channel host object allocation - to after the first exchange config and exchange port data, and this happens during the very first adapter recovery, these updates can not be done until after the scsi host object is allocated. Reorder the fc_host updates in zfcp_fsf_fc_host_link_down() so that they only happen after a check of whether the scsi host object is already allocated or not. During the first adapter recovery this will cause the skip of these updates if a link-down condition is detected, but we can repeat them after we allocated the scsi host object, if necessary. For any further link-down handling the only changes in the work flow are the slightly reordered assignments in zfcp_fsf_fc_host_link_down(). Link: https://lore.kernel.org/r/f841f2cda61dcd7b8549910c44e1831927459edf.1588956679.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Benjamin Block
|
52e61fde5e |
scsi: zfcp: Move fc_host updates during xport data handling into fenced function
When executing exchange port data for a FCP device for the first time, or after an adapter recovery, we update several properties of the fibre channel host object which represents that FCP device. When moving the scsi host object allocation and registration - and thus also the fibre channel host object allocation - to after the first exchange config and exchange port data, this is not possible for the former case. Move all these update into separate, and fenced function that first checks whether the scsi host object already exists or not, before making the updates. During the first ever exchange port data in the adapter life cycle this will make the exchange port data handler skip over this update step, but we can repeat it later, after we allocated the scsi host object. For any further recovery of that adapter the work flow is only changed slightly because then the scsi host object already exists and we don't free it until we release the adapter completely at the end of its life cycle. Link: https://lore.kernel.org/r/ae454c2dc6da0b02907c489af91d0b211d331825.1588956679.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Benjamin Block
|
bd1684817d |
scsi: zfcp: Move shost updates during xconfig data handling into fenced function
When executing exchange config data for a FCP device for the first time, or after an adapter recovery, we update several properties of the scsi host or fibre channel host object that represent that FCP device. When moving the scsi host object allocation and registration - and thus also the fibre channel host object allocation - to after the first exchange config and exchange port data, this is not possible for the former case. Move all these update into separate, and fenced function that first checks whether the scsi host object already exists or not, before making the updates. During the first ever exchange config data in the adapter life cycle this will make the exchange config data handler skip over this update step, but we can repeat it later, after we allocated the scsi host object. For any further recovery of that adapter the work flow is only changed slightly because then the scsi host object already exists and we don't free it until we release the adapter completely at the end of its life cycle. Link: https://lore.kernel.org/r/5fc3f4d38d4334f7aa595497c6f7865fb1102e0f.1588956679.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Benjamin Block
|
978857c7e3 |
scsi: zfcp: Move shost modification after QDIO (re-)open into fenced function
When establishing and activating the QDIO queue pair for a FCP device for the first time, or after an adapter recovery, we publish some of its characteristics to the scsi host object representing that FCP device. When moving the scsi host object allocation and registration to after the first exchange config and exchange port data, this is not possible for the former case - QDIO open for the first time - because that happens before exchange config and exchange port data. Move the scsi host object update into a fenced function that checks whether the object already exists or not. This way we can repeat that step later, once we are past the allocation. Once the first recovery succeeds we don't release the scsi host object anymore, so further recoveries do work as before. Link: https://lore.kernel.org/r/a214ebf508f71e3690113e3e90edab1cea0e24e3.1588956679.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Linus Torvalds
|
93f3321f65 |
SCSI misc on 20200410
This is a batch of changes that didn't make it in the initial pull request because the lpfc series had to be rebased to redo an incorrect split. It's basically driver updates to lpfc, target, bnx2fc and ufs with the rest being minor updates except the sr_block_release one which fixes a use after free introduced by the removal of the global mutex in the first patch set. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXpC3hSYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRTaAP9umhxu 8rRnJ5hsxXRmxOUzO5BGe403ffcBeAiEKQ2n3gEAjeoxZAaqKuDDDRfXyRnBpt9Z QuBrgpm1gdXrJT5DDj4= =+4Qg -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull more SCSI updates from James Bottomley: "This is a batch of changes that didn't make it in the initial pull request because the lpfc series had to be rebased to redo an incorrect split. It's basically driver updates to lpfc, target, bnx2fc and ufs with the rest being minor updates except the sr_block_release one which fixes a use after free introduced by the removal of the global mutex in the first patch set" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (35 commits) scsi: core: Add DID_ALLOC_FAILURE and DID_MEDIUM_ERROR to hostbyte_table scsi: ufs: Use ufshcd_config_pwr_mode() when scaling gear scsi: bnx2fc: fix boolreturn.cocci warnings scsi: zfcp: use fallthrough; scsi: aacraid: do not overwrite retval in aac_reset_adapter() scsi: sr: Fix sr_block_release() scsi: aic7xxx: Remove more FreeBSD-specific code scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug scsi: ufs: set device as active power mode after resetting device scsi: iscsi: Report unbind session event when the target has been removed scsi: lpfc: Change default SCSI LUN QD to 64 scsi: libfc: rport state move to PLOGI if all PRLI retry exhausted scsi: libfc: If PRLI rejected, move rport to PLOGI state scsi: bnx2fc: Update the driver version to 2.12.13 scsi: bnx2fc: Fix SCSI command completion after cleanup is posted scsi: bnx2fc: Process the RQE with CQE in interrupt context scsi: target: use the stack for XCOPY passthrough cmds scsi: target: increase XCOPY I/O size scsi: target: avoid per-loop XCOPY buffer allocations scsi: target: drop xcopy DISK BLOCK LENGTH debug ... |
|
|
Julian Wiedmann
|
1da1092dbf |
s390/qdio: remove cdev from init_data
It's no longer needed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Julian Wiedmann
|
d8564e19da |
s390/qdio: allow for non-contiguous SBAL array in init_data
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers() for each individual queue. But when later passing the SBAL addresses to qdio_establish(), they need to be in a single array of pointers. So if the driver uses multiple Input or Output queues, it needs to allocate a temporary array just to present all its SBAL pointers in this layout. This patch slightly changes the format of the QDIO initialization data, so that drivers can pass a per-queue array where each element points to a queue's SBAL array. zfcp doesn't use multiple queues, so the impact there is trivial. For qeth this brings a nice reduction in complexity, and removes a page-sized allocation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Julian Wiedmann
|
ad96401cdb |
zfcp: inline zfcp_qdio_setup_init_data()
In preparation for a subsequent patch, move the setup of init_data into the only caller. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Julian Wiedmann
|
3db1db93e3 |
s390/qdio: cleanly split alloc and establish
All that qdio_allocate() actually uses from the init_data is the cdev, and the number of Input and Output Queues. Have the driver pass those as parameters, and defer the init_data processing into qdio_establish(). This includes writing per-device(!) trace entries, and most of the sanity checks. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
|
|
Linus Torvalds
|
79f51b7b9c |
SCSI misc on 20200402
update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core update is Hannes moving functions out of the aacraid driver and into the core. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXoYKiyYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSasAP4iGwSB Y8tFaZgWadu76+wj5MdqTBoXdhnIuFF0rZG3pQEAiIKdsfQlbSFdm75+gUtx5hG/ GOilX/pJczTRJDCGNis= =g7Sk -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ... |
|
|
Joe Perches
|
cec9cbac52 |
scsi: zfcp: use fallthrough;
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/ Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> [bblock@linux.ibm.com: resolved merge conflict with recently upstream-sent patch "zfcp: expose fabric name as common fc_host sysfs attribute"] Link: https://lore.kernel.org/r/d14669a67a17392490d3184117941123765db1a4.1585663010.git.bblock@linux.ibm.com Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Jens Remus
|
42cabdaf10 |
scsi: zfcp: log FC Endpoint Security errors
Log any FC Endpoint Security errors to the kernel ring buffer with rate- limiting. Link: https://lore.kernel.org/r/20200312174505.51294-11-maier@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Jens Remus
|
e53d92856e |
scsi: zfcp: enhance handling of FC Endpoint Security errors
Enable for explicit FCP channel FC Endpoint Security error reporting and handle any FSF security errors according to specification. Take the following recovery actions when a FSF_SECURITY_ERROR is reported for the specified FSF commands: - Open Port: Retry the command if possible - Send FCP : Physically close the remote port and reopen For Open Port the command status is set to error, which triggers a retry. For Send FCP the command status is set to error and recovery is triggered to physically reopen the remote port. Link: https://lore.kernel.org/r/20200312174505.51294-10-maier@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Jens Remus
|
616da39e00 |
scsi: zfcp: trace FC Endpoint Security of FCP devices and connections
Trace changes in Fibre Channel Endpoint Security capabilities of FCP devices as well as changes in Fibre Channel Endpoint Security state of their connections to FC remote ports as FC Endpoint Security changes with trace level 3 in HBA DBF. A change in FC Endpoint Security capabilities of FCP devices is traced as response to FSF command FSF_QTCB_EXCHANGE_PORT_DATA with a trace tag of "fsfcesa" and a WWPN of ZFCP_DBF_INVALID_WWPN = 0x0000000000000000 (see FC-FS-4 §18 "Name_Identifier Formats", NAA field). A change in FC Endpoint Security state of connections between FCP devices and FC remote ports is traced as response to FSF command FSF_QTCB_OPEN_PORT_WITH_DID with a trace tag of "fsfcesp". Example trace record of FC Endpoint Security capability change of FCP device formatted with zfcpdbf from s390-tools: Timestamp : ... Area : HBA Subarea : 00 Level : 3 Exception : - CPU ID : ... Caller : 0x... Record ID : 5 ZFCP_DBF_HBA_FCES Tag : fsfcesa FSF FC Endpoint Security adapter Request ID : 0x... Request status : 0x00000010 FSF cmnd : 0x0000000e FSF_QTCB_EXCHANGE_PORT_DATA FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000000 FSF_GOOD FSF stat qual : n/a Prot stat : n/a Prot stat qual : n/a Port handle : 0x00000000 none (invalid) LUN handle : n/a WWPN : 0x0000000000000000 ZFCP_DBF_INVALID_WWPN FCES old : 0x00000000 old FC Endpoint Security FCES new : 0x00000007 new FC Endpoint Security Example trace record of FC Endpoint Security change of connection to FC remote port formatted with zfcpdbf from s390-tools: Timestamp : ... Area : HBA Subarea : 00 Level : 3 Exception : - CPU ID : ... Caller : 0x... Record ID : 5 ZFCP_DBF_HBA_FCES Tag : fsfcesp FSF FC Endpoint Security port Request ID : 0x... Request status : 0x00000010 FSF cmnd : 0x00000005 FSF_QTCB_OPEN_PORT_WITH_DID FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000000 FSF_GOOD FSF stat qual : n/a Prot stat : n/a Prot stat qual : n/a Port handle : 0x... WWPN : 0x500507630401120c WWPN FCES old : 0x00000000 old FC Endpoint Security FCES new : 0x00000004 new FC Endpoint Security Link: https://lore.kernel.org/r/20200312174505.51294-9-maier@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Jens Remus
|
f0d26ae847 |
scsi: zfcp: log FC Endpoint Security of connections
Log the usage of and subsequent changes in FC Endpoint Security of connections between FCP devices and FC remote ports to the kernel ring buffer. Activation of FC Endpoint Security is logged as informational. Change and deactivation are logged as warning. No logging takes place, if FC Endpoint Security is not used (i.e. never activated) on a connection or if it does not change during reopen of a port (e.g. due to adapter or port recovery). Link: https://lore.kernel.org/r/20200312174505.51294-8-maier@linux.ibm.com Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Jens Remus
|
a17c784600 |
scsi: zfcp: report FC Endpoint Security in sysfs
Add an interface to read Fibre Channel Endpoint Security information of FCP channels and their connections to FC remote ports. It comes in the form of new sysfs attributes that are attached to the CCW device representing the FCP device and its zfcp port objects. The read-only sysfs attribute "fc_security" of a CCW device representing a FCP device shows the FC Endpoint Security capabilities of the device. Possible values are: "unknown", "unsupported", "none", or a comma- separated list of one or more mnemonics and/or one hexadecimal value representing the supported FC Endpoint Security: Authentication: Authentication supported Encryption : Encryption supported The read-only sysfs attribute "fc_security" of a zfcp port object shows the FC Endpoint Security used on the connection between its parent FCP device and the FC remote port. Possible values are: "unknown", "unsupported", "none", or a mnemonic or hexadecimal value representing the FC Endpoint Security used: Authentication: Connection has been authenticated Encryption : Connection is encrypted Both sysfs attributes may return hexadecimal values instead of mnemonics, if the mnemonic lookup table does not contain an entry for the FC Endpoint Security reported by the FCP device. Link: https://lore.kernel.org/r/20200312174505.51294-7-maier@linux.ibm.com Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Jens Remus
|
185f2d2d59 |
scsi: zfcp: auto variables for dereferenced structs in open port handler
Introduce automatic variables for adapter and QTCB bottom in zfcp_fsf_open_port_handler(). This facilitates subsequent changes to meet the 80 character per line limit. Link: https://lore.kernel.org/r/20200312174505.51294-6-maier@linux.ibm.com Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Steffen Maier
|
7e0e4e0958 |
scsi: zfcp: fix fc_host attributes that should be unknown on local link down
When we get an unsolicited notification on local link went down,
zfcp_fsf_status_read_link_down() calls zfcp_fsf_link_down_info_eval().
This only blocks rports, and sets ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED and
ZFCP_STATUS_COMMON_ERP_FAILED. Only the fc_host port_state changes to
"Linkdown", because zfcp_scsi_get_host_port_state() is an active callback
and uses the adapter status.
Other fc_host attributes model, port_id, port_type, speed, fabric_name (and
zfcp device attributes card_version, peer_wwpn, peer_wwnn, peer_d_id) which
depend on a local link, continued to show their last known "good" value.
Only if something triggered an exchange config data, some values were
updated to their unknown equivalent via case
FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE due to local link down. Triggers for
exchange config data are adapter recovery, or reading any of the following
zfcp-specific scsi host sysfs attributes "requests", "megabytes", or
"seconds_active" in /sys/devices/css*/*.*.*/*.*.*/host*/scsi_host/host*/.
The other fc_host attributes active_fc4s and permanent_port_name continued
to show their last known "good" value. Only if something triggered an
exchange port data, some values changed. Active_fc4s became all zeros as
unknown equivalent during link down. Permanent_port_name does not depend
on a local link. But for non-NPIV FCP devices, permanent_port_name
erroneously became whatever value fc_host port_name had at that point in
time (see previous paragraph). Triggers for exchange port data are the
zfcp-specific scsi host sysfs attribute "utilization", or
[{reset,get}_fc_host_stats] write anything into "reset_statistics" or read
any of the other attributes under
/sys/devices/css*/*.*.*/*.*.*/host*/fc_host/host*/statistics/.
(cf. v4.9 commit
|
|
|
Steffen Maier
|
538c6e910b |
scsi: zfcp: wire previously driver-specific sysfs attributes also to fc_host
Manufacturer, HBA model, firmware version, and hardware version. Use the same value format as for the driver-specific attributes. Keep the driver-specific attributes for stable user space sysfs API. Link: https://lore.kernel.org/r/20200312174505.51294-4-maier@linux.ibm.com Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
|
|
Steffen Maier
|
e05a10a055 |
scsi: zfcp: expose fabric name as common fc_host sysfs attribute
FICON Express8S or older, as well as card features newer than FICON
Express16S+ have no certain firmware level requirement.
FICON Express16S or FICON Express16S+ have the following
minimum firmware level requirements to show a proper fabric name value:
z13 machine
FICON Express16S , MCL P08424.005 , LIC version 0x00000721
z14 machine
FICON Express16S , MCL P42611.008 , LIC version 0x10200069
FICON Express16S+ , MCL P42625.010 , LIC version 0x10300147
Otherwise, the read value is not the fabric name.
Each FCP channel of these card features might need one SAN fabric re-login
after concurrent microcode update in order to show the proper fabric name.
Possible ways to trigger a SAN fabric re-login are one of: Pull fibres
between FCP channel port and SAN switch port on either side and re-plug,
disable SAN switch port adjacent to FCP channel port and re-enable switch
port, or at Service Element toggle off all CHPIDs of FCP channel over all
LPARs and toggle CHPIDs on again. Zfcp operating subchannels (FCP devices)
on such FCP channel recovers a fabric re-login.
Initialize fabric name for any topology and have it an invalid WWPN 0x0 for
anything but fabric topology. Otherwise for e.g. point-to-point topology
one could see the initial -1 from fc_host_setup() and after a link unplug
our fabric name would turn to 0x0 (with subsequent commit ("zfcp: fix
fc_host attributes that should be unknown on local link down") and stay 0x0
on link replug. I did not initialize to 0x0 somewhere even earlier in the
code path such that it would not flap from real to 0x0 to real on e.g. an
exchange config data with fabric topology.
Link: https://lore.kernel.org/r/20200312174505.51294-3-maier@linux.ibm.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|
Steffen Maier
|
819732be9f |
scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point
v2.6.27 commit |
|
|
Linus Torvalds
|
7557c1b3f7 |
SCSI fixes on 20200229
Four small fixes. Three are in drivers for fairly obvious bugs. The fourth is a set of regressions introduced by the compat_ioctl changes because some of the compat updates wrongly replaced .ioctl instead of .compat_ioctl. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXlpxDCYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSXsAPwOGPkU ObFbUs75Tdmk1M7jqtxgBsNhuNta0S8d7dJ3aAEA/YBtGGQWoeEGivUKwzwA4cwL 1w1GbhPEblpMNO8keVA= =I7qk -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes. Three are in drivers for fairly obvious bugs. The fourth is a set of regressions introduced by the compat_ioctl changes because some of the compat updates wrongly replaced .ioctl instead of .compat_ioctl" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places scsi: zfcp: fix wrong data and display format of SFP+ temperature scsi: sd_sbc: Fix sd_zbc_report_zones() scsi: libfc: free response frame from GPN_ID |
|
|
Benjamin Block
|
a3fd4bfe85 |
scsi: zfcp: fix wrong data and display format of SFP+ temperature
When implementing support for retrieval of local diagnostic data from the FCP channel, the wrong data format was assumed for the temperature of the local SFP+ connector. The Fibre Channel Link Services (FC-LS-3) specification is not clear on the format of the stored integer, and only after consulting the SNIA specification SFF-8472 did we realize it is stored as two's complement. Thus, the used data and display format is wrong, and highly misleading for users when the temperature should drop below 0°C (however unlikely that may be). To fix this, change the data format in `struct fsf_qtcb_bottom_port` from unsigned to signed, and change the printf format string used to generate `zfcp_sysfs_adapter_diag_sfp_temperature_show()` from `%hu` to `%hd`. Link: https://lore.kernel.org/r/d6e3be5428da5c9490cfff4df7cae868bc9f1a7e.1582039501.git.bblock@linux.ibm.com Fixes: |
|
|
Julian Wiedmann
|
2db01da8d2 |
s390/qdio: fill SBALEs with absolute addresses
sbale->addr holds an absolute address (or for some FCP usage, an opaque request ID), and should only be used with proper virt/phys translation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |