mirror of https://gitee.com/openkylin/linux.git
6582 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Dan Carpenter
|
d5d4602e04 |
Staging: iio: fix a MAINTAINERS entry
The "drivers/" part of the path name was missing. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> |
|
|
William Breathitt Gray
|
28e5d3bb03 |
iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
The ACCES 104-QUAD-8 is a general purpose quadrature encoder counter/interface board. The 104-QUAD-8 is capable of monitoring the outputs of eight encoders via four on-board LSI/CSI LS7266R1 24-bit dual-axis quadrature counter chips. Core functions handled by the LS7266R1, such as direction and total count, are available. Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and also clears the counter's respective error flag. Although the counters have a 25-bit range, only the lower 24 bits may be set, either directly or via a counter's preset attribute. Interrupts are not supported by this driver. This driver adds IIO support for the ACCES 104-QUAD-8 and ACCES 104-QUAD-4. The base port addresses for the devices may be configured via the base array module parameter. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> |
|
|
David Lin
|
8d904fe50e |
staging: greybus: add maintainer for uart and log protocol drivers
Add myself as greybus uart and log protocol driver maintainer. Signed-off-by: David Lin <dtwlin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Vaibhav Hiremath
|
92b8bd96fc |
staging: greybus: add maintainer for greybus platform drivers
Add Vaibhav Hiremath as a Maintainer of Greybus platform drivers. Signed-off-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Vaibhav Agarwal
|
926706c59d |
staging: greybus: add maintainer for greybus audio protocol driver
Add Vaibhav as maintainer of some Greybus Audio protocol drivers. Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Viresh Kumar
|
5bd163509f |
staging: greybus: add Viresh as maintainer of few greybus protocol drivers
Add Viresh Kumar as Maintainer of some of the Greybus protocol drivers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Bryan O'Donoghue
|
7d7005180a |
staging: greybus: MAINTAINERS: add greybus protocol drivers maintainers
Add bod to some Greybus protocol drivers maintainers, loopback and timesync. Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Greg Kroah-Hartman
|
530a70617c |
Merge branch 'greybus' into staging-testing
This merges the greybus branch into staging-testing. It contains the drivers/staging/greybus/ subsystem and related drivers and has passed the 0-day bot tests so no builds should break. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Rui Miguel Silva
|
2bbadafbe4 |
staging: greybus: MAINTAINERS: add greybus protocol drivers maintainers
Add me to some Greybus protocol drivers maintainers, spi, sdio, power supply, light and gpio. Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Greg Kroah-Hartman
|
629c1fb537 |
staging: greybus: add some MAINTAINERS
Johan and Alex and I are going to maintain the greybus code, so add it to MAINTAINERS so we get cc:ed on patches. Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Alex Elder <elder@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Greg Kroah-Hartman
|
552edf8d79 |
Second set of iio new device support, features and cleanups for the 4.9 cycle.
New device support
* ad8801 dac
- new driver supporting ad8801 and ad8803 DACs.
* adc12138
- new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
- new driver
* mxc6255
- add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
- add support for the vz89te part which drops the voc_short channel and adds
CRCs compared to other supported parts.
New features
* core
- immutable triggers. These effectively grant exclusive control over a
trigger. The typical usecase is a device representing an analog part
(perhaps a MUX) that needs to control the sampling of a downstream
ADC.
- resource managed trigger registration and triggered_buffer_init.
- iio_push_event now protected against case of the event interface
registration not having yet occured. Only matters if an interrupt
can occur during this window - might happen on shared interrupt lines.
- helper to let a driver query if the trigger it is using is provided by
itself (using the convention of both device and trigger having the same
parent).
* tools
- iio-utils. Used channel modifier scaling in preference to generic scaling
when both exist.
* at91-adc
- Add support for touchscreen switches closure time needed by some newer
parts.
* stx104
- support the ADC channels on this ADC/DAC board. As these are the primary
feature of the board also move the driver to the iio/adc directory.
* sx9500
- device tree bindings.
Cleanups / Fixes
* ad5755
- fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
- drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
- avoid an unused functional warning due to rework in PM core code.
- remove .owner field setting as done by i2c_core.
* ina2xx
- clear out a left over debug field from chip global data.
* hid-sensors
- avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
- fix non static symbol warnings.
* ms5611
- fetch and enable regulators unconditionally when they aren't optional.
* sca3000
- whitespace cleanup.
* st_sensors
- fetch and enable regulators unconditionally rather than having them
supported as optional regulators (missunderstanding on my part amongst
others a while back)
- followup to previous patch fixes error checking on the regulators.
- mark symbols static where possible.
- use the 'is it my trigger' help function. This prevents the odd case
of another device triggering from the st-sensors trigger whilst the
st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
- add missing of_node_put.
* vz89x
- rework to all support of new devices.
- prevent reading of a corrupted buffer.
- fixup a return value of 0/1 in a bool returning function.
Address updates
- Vlad Dogaru email address change.
-----BEGIN PGP SIGNATURE-----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=V1xL
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of iio new device support, features and cleanups for the 4.9 cycle.
New device support
* ad8801 dac
- new driver supporting ad8801 and ad8803 DACs.
* adc12138
- new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
- new driver
* mxc6255
- add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
- add support for the vz89te part which drops the voc_short channel and adds
CRCs compared to other supported parts.
New features
* core
- immutable triggers. These effectively grant exclusive control over a
trigger. The typical usecase is a device representing an analog part
(perhaps a MUX) that needs to control the sampling of a downstream
ADC.
- resource managed trigger registration and triggered_buffer_init.
- iio_push_event now protected against case of the event interface
registration not having yet occured. Only matters if an interrupt
can occur during this window - might happen on shared interrupt lines.
- helper to let a driver query if the trigger it is using is provided by
itself (using the convention of both device and trigger having the same
parent).
* tools
- iio-utils. Used channel modifier scaling in preference to generic scaling
when both exist.
* at91-adc
- Add support for touchscreen switches closure time needed by some newer
parts.
* stx104
- support the ADC channels on this ADC/DAC board. As these are the primary
feature of the board also move the driver to the iio/adc directory.
* sx9500
- device tree bindings.
Cleanups / Fixes
* ad5755
- fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
- drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
- avoid an unused functional warning due to rework in PM core code.
- remove .owner field setting as done by i2c_core.
* ina2xx
- clear out a left over debug field from chip global data.
* hid-sensors
- avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
- fix non static symbol warnings.
* ms5611
- fetch and enable regulators unconditionally when they aren't optional.
* sca3000
- whitespace cleanup.
* st_sensors
- fetch and enable regulators unconditionally rather than having them
supported as optional regulators (missunderstanding on my part amongst
others a while back)
- followup to previous patch fixes error checking on the regulators.
- mark symbols static where possible.
- use the 'is it my trigger' help function. This prevents the odd case
of another device triggering from the st-sensors trigger whilst the
st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
- add missing of_node_put.
* vz89x
- rework to all support of new devices.
- prevent reading of a corrupted buffer.
- fixup a return value of 0/1 in a bool returning function.
Address updates
- Vlad Dogaru email address change.
|
|
|
Greg Kroah-Hartman
|
8473054e4d |
Merge 4.8-rc6 into staging-next
We need the IIO changes in here for future patches to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Jes Sorensen
|
b49f6ab951 |
staging: Remove rtl8723au driver
This driver is superseded by rtl8xxxu and has been marked as scheduled for deletion since 4.6 Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Linus Torvalds
|
e8b3b45de8 |
ARM: SoC fixes
This is a slightly larger batch of fixes that we've been sitting on a few
-rcs. Most of them are simple oneliners, but there are two sets that are
slightly larger and worth pointing out:
- A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone
SoC, among others). It's the only clock that ever has a valid offset of 0,
so a new flag needed introduction once this problem was discovered.
- A collection of CCI fixes for performance counters discovered once people
started using it on X-Gene CPUs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8pPd
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"This is a slightly larger batch of fixes that we've been sitting on a
few -rcs. Most of them are simple oneliners, but there are two sets
that are slightly larger and worth pointing out:
- A set of patches to OMAP to deal with hwmod for RTC on am33xx
(beaglebone SoC, among others). It's the only clock that ever has
a valid offset of 0, so a new flag needed introduction once this
problem was discovered.
- A collection of CCI fixes for performance counters discovered once
people started using it on X-Gene CPUs"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
arm-cci: pmu: Fix typo in event name
Revert "ARM: tegra: fix erroneous address in dts"
ARM: dts: imx6qdl: Fix SPDIF regression
ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
ARM: dts: kirkwood: Fix PCIe label on OpenRD
ARM: kirkwood: ib62x0: fix size of u-boot environment partition
bus: arm-ccn: make event groups reliable
bus: arm-ccn: fix hrtimer registration
bus: arm-ccn: fix PMU interrupt flags
ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
MAINTAINERS: add tree entry for ARM/UniPhier architecture
ARM: sun5i: Fix typo in trip point temperature
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: imx6ul: populates platform device at .init_machine
bus: arm-ccn: Add missing event attribute exclusions for host/guest
bus: arm-ccn: Correct required arguments for XP PMU events
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
...
|
|
|
Mark Brown
|
ae4860b533 | Merge remote-tracking branches 'spi/fix/lock', 'spi/fix/maintainers', 'spi/fix/put', 'spi/fix/pxa2xx', 'spi/fix/sh-msiof' and 'spi/fix/timeout' into spi-linus | |
|
Greg Kroah-Hartman
|
9c2edd8b5b |
Merge 4.8-rc5 into staging-next
We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Linus Torvalds
|
018c81b827 |
Staging/IIO driver fixes for 4.8-rc5
Here are a number of small fixes for staging and IIO drivers that resolve reported problems. Full details are in the shortlog. All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iFYEABECABYFAlfK4HoPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspt0MAn0wC dYhZOUHxOptLiEkVGXFCU9kzAJ4gETEbuGn9lgp2TFATOOAN7oqPUw== =6MKk -----END PGP SIGNATURE----- Merge tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are a number of small fixes for staging and IIO drivers that resolve reported problems. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits) arm: dts: rockchip: add reset node for the exist saradc SoCs arm64: dts: rockchip: add reset saradc node for rk3368 SoCs iio: adc: rockchip_saradc: reset saradc controller before programming it iio: accel: kxsd9: Fix raw read return iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access include/linux: fix excess fence.h kernel-doc notation staging: wilc1000: correctly check if associatedsta has not been found staging: wilc1000: NULL dereference on error staging: wilc1000: txq_event: Fix coding error MAINTAINERS: Add file patterns for ion device tree bindings MAINTAINERS: Update maintainer entry for wilc1000 iio: chemical: atlas-ph-sensor: fix typo in val assignment iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING" staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility staging: comedi: dt2811: fix a precedence bug staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN. staging: comedi: ni_mio_common: fix wrong insn_write handler staging: comedi: comedi_test: fix timer race conditions staging: comedi: daqboard2000: bug fix board type matching code ... |
|
|
William Breathitt Gray
|
4075a283ae |
iio: stx104: Add IIO support for the ADC channels
The Apex Embedded Systems STX104 features 16 channels of single-ended (8 channels of true differential) 16-bit analog input. Differential input configuration may be selected via a physical jumper on the device. Similarly, input polarity (unipolar/bipolar) is configured via a physical jumper on the device. Input gain selection is available to the user via software, thus allowing eight possible input ranges: +-10V, +-5V, +-2.5V, +-1.25V, 0 to 10V, 0 to 5V, 0 to 2.5V, and 0 to 1.25V. Four input gain configurations are supported: x1, x2, x4, and x8. This ADC resolution is 16-bits (1/65536 of full scale). Analog input samples are taken on software trigger; neither FIFO sampling nor interrupt triggering is supported by this driver. The Apex Embedded Systems STX104 is primarily an analog-to-digital converter device. The STX104 IIO driver was initially placed in the DAC directory because only the DAC portion of the STX104 was supported at the time. Now that ADC support has been added to the STX104 IIO driver, the driver should be moved to the more appropriate ADC directory. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> |
|
|
Vladimir Davydov
|
c4e297386b |
MAINTAINERS: Vladimir has moved
vdavydov@{parallels,virtuozzo}.com will bounce from now on.
Link: http://lkml.kernel.org/r/20160831180752.GB10353@esperanza
Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Linus Torvalds
|
037d2405d0 |
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A few updates for timers & co:
- prevent a livelock in the timekeeping code when debugging is
enabled
- prevent out of bounds access in the timekeeping debug code
- various fixes in clocksource drivers
- a new maintainers entry"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
drivers/clocksource/pistachio: Fix memory corruption in init
clocksource/drivers/timer-atmel-pit: Enable mck clock
clocksource/drivers/pxa: Fix include files for compilation
MAINTAINERS: Add ARM ARCHITECTED TIMER entry
timekeeping: Cap array access in timekeeping_debug
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
|
|
|
Olof Johansson
|
633af91ddb |
Fix for v4.8-rc1:
1. Select proper eMMC HighSpeed mode on Odroid XU. DTS was mixing
"samsung,exynos5250-dw-mshc" compatible (with HS200 as fastest mode)
with a property "mmc-hs400-1_8v" thus leading to failures during
probe.
2. Update Krzysztof Kozlowski's email address in maintainers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YvD5
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Fix for v4.8-rc1:
1. Select proper eMMC HighSpeed mode on Odroid XU. DTS was mixing
"samsung,exynos5250-dw-mshc" compatible (with HS200 as fastest mode)
with a property "mmc-hs400-1_8v" thus leading to failures during
probe.
2. Update Krzysztof Kozlowski's email address in maintainers.
* tag 'samsung-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: dts: exynos: Properly select eMMC HighSpeed mode on Odroid XU
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Masahiro Yamada
|
becc8d3ccd |
MAINTAINERS: add tree entry for ARM/UniPhier architecture
Add T: entry for a new git tree, which I expect UniPhier SoC updates will be pulled from. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Mark Rutland
|
588deb614a |
MAINTAINERS: Add ARM ARCHITECTED TIMER entry
The ARM architected timer driver falls under the drivers/clocksource/ catch-all in MAINTAINERS, and get_maintainers.pl doesn't suggest a number of people who should be Cc'd. The ARM architected timer is a core component of ARMv7+VE and ARMv8, and is critical to the correct operation of both architecture ports (and their respective KVM code), and patches to it should have review by knowledgeable interested parties. This patch adds a MAINTAINERS entry for the driver and its low-level arch components, such that get_maintainer.pl will always include relevant interested parties for modifications to the driver. For the timebeing, this means myself and Marc Zyngier. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1470737036-2082-1-git-send-email-mark.rutland@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
|
|
Greg Kroah-Hartman
|
d5bd1eba19 |
First round of new features, device support and cleanups for IIO in the 4.9 cycle.
Device support
* ak8974
- New driver and bindings for this 2009 vintage magnetometer (it was very
popular back then!)
* atlas-ph-sensor
- ORP sensor support(I had to look up what one of these was)
* cio-dac
- New driver for Measurement Computing DAC boards
* dmard06
- New driver for Domintech DMARDO6 accelerometer. Also vendor prefix.
* dmard09
- New driver for Domintech DMARD09 accelerometer.
* maxim-thermocouple
- max6675 and max31855 new driver
* mt6577 auxdac
- new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this
hardware.
* ti-adc161s626
- new driver for this TI single channel differential ADC.
* vcnl4000
- support vcnl4010 and vcnl4020 which are compatible for all features
currently supported by this driver.
New features
* Core
- Allow retrieving of underlying iio_dev from a callback buffer handle.
This is needed to allow client drivers to perform operations such as
configuring the trigger used.
* hid-sensors
- asynchronous resume support to avoid really long resume times.
* kxcjk-1013
- add the mysterious KIOX000A ACPI id seen in the wild.
* Tools
- lsiio now enumerates processed as well as raw channels.
Cleanup
* ad7298
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ad7793
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
*
|
|
|
Leon Romanovsky
|
701b4bf6e3 |
MAINTAINERS: Fix Soft RoCE location
The Soft RoCE (rxe) is located in drivers/inifiniband/sw
and not in drivers/infiniband/hw/.
This patch fixes it.
Fixes:
|
|
|
Tony Luck
|
4ec656bdf4 |
EDAC, skx_edac: Add EDAC driver for Skylake
This is an entirely new driver instead of yet another set of patches to sb_edac.c because: 1) Mapping from PCI devices to socket/memory controller is significantly different. Skylake scatters devices on a socket across a number of PCI buses. 2) There is an extra level of interleaving via the "mcroute" register that would be a little messy to squeeze into the old driver. 3) Validation is getting too expensive. Changes to sb_edac need to be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and Knights Landing. Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Geert Uytterhoeven
|
e9d766b965 |
MAINTAINERS: Add file patterns for ion device tree bindings
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: devel@driverdev.osuosl.org Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Aditya Shankar
|
d9a8594011 |
MAINTAINERS: Update maintainer entry for wilc1000
Take the maintenance of the Atmel WIFI staging driver wilc1000. Former maintainers are no more with Atmel. Reported-by: Loic Lefort <loic.lefort@atmel.com> Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com> Signed-off-by: Ganesh Krishna <ganesh.krishna@microchip.com> Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Oleg Drokin
|
8701dbf9ac |
Add James Simmons as another Lustre maintainer
James Simmons is also spendign a lot of efforts on cleaning up staging tree Lustre code and also helps to sync up all the missing changes from the other tree. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Andi Shyti
|
2e365a703e |
MAINTAINERS: add myself as Samsung SPI maintainer
Create a new entry for the Samsung SPI driver supported by the drivers/spi/spi-s3c* and remove it from its original place under "ARM/SAMSUNG EXYNOS ARM ARCHITECTURES". The original maintainership inherited from the Samsung Exynos ARM Architecture is kept as it was (i.e. Kukjin and Krzysztof), I will help and co-maintain the driver. Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> |
|
|
Krzysztof Kozlowski
|
326dce0734 |
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
Change my email address to kernel.org account instead of Samsung one. Add Bartlomiej Zolnierkiewicz as a co-maintainer of Maxim and Samsung PMIC drivers. These are used on many of our boards along with Exynos SoCs and Samsung R&D Institute Poland can still take care of them. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-samsung-soc@vger.kernel.org Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kukjin Kim <kgene@kernel.org> |
|
|
Linus Walleij
|
7c94a8b2ee |
iio: magn: add a driver for AK8974
This adds a driver for the Asahi Kasei AK8974 and its sibling AMI305 magnetometers. It was deployed on scale in 2009 on a multitude of devices. It is distincly different from AK8973 and AK8975 and needs its own driver. This patch is based on the long lost work of Samu Onkalo at Nokia, who made a misc character device driver for the Maemo/MeeGo Nokia devices, before the time of the IIO subsystem. It was mounted in e.g. the Nokia N950, N8, N86, N97 etc. It is also mounted on the ST-Ericsson HREF reference designs. It works nicely in sysfs: $ cat in_magn_x_raw && cat in_magn_y_raw && cat in_magn_z_raw -55 -101 161 And with buffered reads using a simple HRTimer trigger: $ generic_buffer -c10 -a -n ak8974 -t foo iio device number being used is 3 iio trigger number being used is 2 No channels are enabled, enabling all channels Enabling: in_magn_x_en Enabling: in_magn_y_en Enabling: in_magn_z_en Enabling: in_timestamp_en /sys/bus/iio/devices/iio:device3 foo -58.000000 -102.000000 157.000000 946684970985321044 -60.000000 -98.000000 159.000000 946684971012237548 -60.000000 -106.000000 163.000000 946684971032257080 -62.000000 -94.000000 169.000000 946684971052185058 -58.000000 -98.000000 163.000000 946684971072204589 -54.000000 -100.000000 163.000000 946684971092224121 -53.000000 -103.000000 164.000000 946684971112731933 -50.000000 -102.000000 165.000000 946684971132232666 -61.000000 -101.000000 164.000000 946684971152191162 -57.000000 -99.000000 168.000000 946684971172210693 Disabling: in_magn_x_en Disabling: in_magn_y_en Disabling: in_magn_z_en Disabling: in_timestamp_en I cannot currently scale these raw values to gauss. This is because of lack of documentation. I have sent a request for a datasheet to Asahi Kasei. The driver can optionally use a DRDY line IRQ to capture data, else it will sleep and poll. Cc: Samu Onkalo <samu.onkalo@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Tested-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> |
|
|
Linus Torvalds
|
d3396e1e4e |
ARM: SoC fixes
A couple of bug fixes have come in for v4.8 so far. Since the first few were
originally meant to go into -rc1 (but didn't get sent in time for travel
reasons), the branch is unfortunately based on top of a commit in the
middle of the merge window rather than -rc1.
Content-wise we have
- A fix for the last remaining broken build in kernelci,
getting mach-shmobile to build again with SMP disabled
- A fix for a realview regression that broke real hardware but
not the qemu model that everyone uses in practice (needed
for v4.7 as well)
- A merge conflict fix for Tegra that also broke v4.7
- Two Kconfig fixes for arm64 build regressions
- A couple of arm32 build warning fixes (all harmless)
- Fixing the RTC on Exynos7 Espresso (which apparently
never worked right)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n3Zs
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of bug fixes have come in for v4.8 so far. Since the first
few were originally meant to go into -rc1 (but didn't get sent in time
for travel reasons), the branch is unfortunately based on top of a
commit in the middle of the merge window rather than -rc1.
Content-wise we have:
- a fix for the last remaining broken build in kernelci, getting
mach-shmobile to build again with SMP disabled
- a fix for a realview regression that broke real hardware but not
the qemu model that everyone uses in practice (needed for v4.7 as
well)
- a merge conflict fix for Tegra that also broke v4.7
- two Kconfig fixes for arm64 build regressions
- a couple of arm32 build warning fixes (all harmless)
- fix the RTC on Exynos7 Espresso (which apparently never worked
right)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
arm64: Kconfig: select ALPINE_MSI only if PCI is selected
ARM: dts: realview: Fix PBX-A9 cache description
ARM: tegra: fix erroneous address in dts
ARM: dts: add syscon compatible string for AP syscon
ARM: dts: add syscon compatible string for CP syscon
ARM: oxnas: select reset controller framework
ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
ARM: don't include removed directories
Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
ARM: shmobile: don't call platform_can_secondary_boot on UP
MAINTAINER: alpine: add a mailing list
ARM: do away with final ARCH_REQUIRE_GPIOLIB
arm64: dts: Fix RTC by providing rtc_src clock
|
|
|
Linus Torvalds
|
0803e04011 |
virtio/vhost: new features for 4.8
- New vsock device support in host and guest - Platform IOMMU support in host and guest, including compatibility quirks for legacy systems. - Misc fixes and cleanups. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXofvbAAoJECgfDbjSjVRpUTIH/iEoK9h636tBayXy0PXkPby0 6fMaRFy6H1HgEttgDhJE8Pqg/ba3qaW9Em0fHyFq7Mp2waFHAZ8hAT8phC6TAK3c CIBnfzyyuI8u3N9SnNOfelPVcwCBfuALuuTsXB/rwKbYQEVv+U5Rdt3Vyx9+lXkj P005klz7PfqxFhQrrnj4Eh7VawtHwmMuLH8YoWpCZpM71dHPo6eL+3ftKwhH2boo qK86uVprwba03Pewpm13vQnotemfVfUUkjXd4EJpG3dx7E0KZosuj0ZG9OV8mPGQ Cl2gBdUhocdJgeUnAHmf6tumYi9KFlYfy6xLy44YMmN7FL3E9nQjaKZp25UKfiM= =ztIm -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio/vhost updates from Michael Tsirkin: - new vsock device support in host and guest - platform IOMMU support in host and guest, including compatibility quirks for legacy systems. - misc fixes and cleanups. * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: VSOCK: Use kvfree() vhost: split out vringh Kconfig vhost: detect 32 bit integer wrap around vhost: new device IOTLB API vhost: drop vringh dependency vhost: convert pre sorted vhost memory array to interval tree vhost: introduce vhost memory accessors VSOCK: Add Makefile and Kconfig VSOCK: Introduce vhost_vsock.ko VSOCK: Introduce virtio_transport.ko VSOCK: Introduce virtio_vsock_common.ko VSOCK: defer sock removal to transports VSOCK: transport-specific vsock_transport functions vhost: drop vringh dependency vop: pull in vhost Kconfig virtio: new feature to detect IOMMU device quirk balloon: check the number of available pages in leak balloon vhost: lockless enqueuing vhost: simplify work flushing |
|
|
Linus Torvalds
|
4305f42401 |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.8. Also includes is a
minor SSB cleanup as SSB code traditionally is merged through the MIPS
tree:
ATH25:
- MIPS: Add default configuration for ath25
Boot:
- For zboot, copy appended dtb to the end of the kernel
- store the appended dtb address in a variable
BPF:
- Fix off by one error in offset allocation
Cobalt code:
- Fix typos
Core code:
- debugfs_create_file returns NULL on error, so don't use IS_ERR for
testing for errors.
- Fix double locking issue in RM7000 S-cache code. This would only
affect RM7000 ARC systems on reboot.
- Fix page table corruption on THP permission changes.
- Use compat_sys_keyctl for 32 bit userspace on 64 bit kernels.
David says, there are no compatibility issues raised by this fix.
- Move some signal code around.
- Rewrite r4k count/compare clockevent device registration such that
min_delta_ticks/max_delta_ticks files are guaranteed to be
initialized.
- Only register r4k count/compare as clockevent device if we can
assume the clock to be constant.
- Fix MSA asm warnings in control reg accessors
- uasm and tlbex fixes and tweaking.
- Print segment physical address when EU=1.
- Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO.
- CP: Allow booting by VP other than VP 0
- Cache handling fixes and optimizations for r4k class caches
- Add hotplug support for R6 processors
- Cleanup hotplug bits in kconfig
- traps: return correct si code for accessing nonmapped addresses
- Remove cpu_has_safe_index_cacheops
Lantiq:
- Register IRQ handler for virtual IRQ number
- Fix EIU interrupt loading code
- Use the real EXIN count
- Fix build error.
Loongson 3:
- Increase HPET_MIN_PROG_DELTA and decrease HPET_MIN_CYCLES
Octeon:
- Delete built-in DTB pruning code for D-Link DSR-1000N.
- Clean up GPIO definitions in dlink_dsr-1000n.dts.
- Add more LEDs to the DSR-100n DTS
- Fix off by one in octeon_irq_gpio_map()
- Typo fixes
- Enable SATA by default in cavium_octeon_defconfig
- Support readq/writeq()
- Remove forced mappings of USB interrupts.
- Ensure DMA descriptors are always in the low 4GB
- Improve USB reset code for OCTEON II.
Pistachio:
- Add maintainers entry for pistachio SoC Support
- Remove plat_setup_iocoherency
Ralink:
- Fix pwm UART in spis group pinmux.
SSB:
- Change bare unsigned to unsigned int to suit coding style
Tools:
- Fix reloc tool compiler warnings.
Other:
- Delete use of ARCH_WANT_OPTIONAL_GPIOLIB"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (61 commits)
MIPS: mm: Fix definition of R6 cache instruction
MIPS: tools: Fix relocs tool compiler warnings
MIPS: Cobalt: Fix typo
MIPS: Octeon: Fix typo
MIPS: Lantiq: Fix build failure
MIPS: Use CPHYSADDR to implement mips32 __pa
MIPS: Octeon: Dlink_dsr-1000n.dts: add more leds.
MIPS: Octeon: Clean up GPIO definitions in dlink_dsr-1000n.dts.
MIPS: Octeon: Delete built-in DTB pruning code for D-Link DSR-1000N.
MIPS: store the appended dtb address in a variable
MIPS: ZBOOT: copy appended dtb to the end of the kernel
MIPS: ralink: fix spis group pinmux
MIPS: Factor o32 specific code into signal_o32.c
MIPS: non-exec stack & heap when non-exec PT_GNU_STACK is present
MIPS: Use per-mm page to execute branch delay slot instructions
MIPS: Modify error handling
MIPS: c-r4k: Use SMP calls for CM indexed cache ops
MIPS: c-r4k: Avoid small flush_icache_range SMP calls
MIPS: c-r4k: Local flush_icache_range cache op override
MIPS: c-r4k: Split r4k_flush_kernel_vmap_range()
...
|
|
|
Linus Torvalds
|
32199ec3cf |
NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the
ntb_perf and ntb_pingpong for increased debugability. Also, modification to the ntb_transport layer to increase/decrease the number of transport entries depending on the ring size. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXpLkZAAoJEG5mS6x6i9IjeEwP/jBJYgxQWToyZvIkIUEWzQcH +CvQK8CNXim+4ygj2zu1gj8mI1oLiBeX2Pmtad47OSOcDQQ1zswkIQm0kJj4mkpP nOEk0fPU9alB7oKvA8sQTj4xWGtI2de6GwWOPI8kXUETfmlqD5R+YheQMrOr8LfK QhJSqzxo1prA5sdDOdc4IoQmaMIGxeUEcGCvHvGmcS+atLkaTiKDTPAqPL+3015I IjKsmUx5Q83XyakWw0S53/kJtOnryGm31WpIWRvvwyOmLxHhf2AQQnOWi5n8HPcl DqSKG2Z+1WWNoQXp/qDGGNx/4e4iuz17fHpR4PB2KCN4P5lp/FhMRcIBUrvmrYO1 SDQtagZVtHwwNFKOnHUHiK78RxjwhGNeExCXgDZxihJK06b5UzGekkMVheAS5MYi btTW6tAQ7blwUjIIe230hX5nLAYWItttmu1ef1GjZef10gRVq2CmtY7esYUyOt7y Pk05lcwrdp6mPRocp7FF0oxAtiDPBskwiLWoE+xyFD1fMaMpUTSJ3aw4a/QZywSC 8h5U244zb3gZmEiHmMrYVtQcoz7ceLpB0Au9018B3WphXyPaFkQoxY77riaEOWTP 1G/etepjMND3xfARoCRfWipRsPEY1uDMaguMUtLKLsAFEg0vk9knHziUMWbZwEwi Cg1v5gfzt6ESPhzkrp9u =wfUq -----END PGP SIGNATURE----- Merge tag 'ntb-4.8' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the ntb_perf and ntb_pingpong for increased debugability. Also, modification to the ntb_transport layer to increase/decrease the number of transport entries depending on the ring size" * tag 'ntb-4.8' of git://github.com/jonmason/ntb: NTB: ntb_hw_intel: use local variable pdev NTB: ntb_hw_intel: show BAR size in debugfs info ntb_test: Add a selftest script for the NTB subsystem ntb_perf: clear link_is_up flag when the link goes down. ntb_pingpong: Add a debugfs file to get the ping count ntb_tool: Add link status and files to debugfs ntb_tool: Postpone memory window initialization for the user ntb_perf: Wait for link before running test ntb_perf: Return results by reading the run file ntb_perf: Improve thread handling to increase robustness ntb_perf: Schedule based on time not on performance ntb_transport: Check the number of spads the hardware supports ntb_tool: Add memory window debug support ntb_perf: Allow limiting the size of the memory windows NTB: allocate number transport entries depending on size of ring size ntb_tool: BUG: Ensure the buffer size is large enough to return all spads ntb_tool: Fix infinite loop bug when writing spad/peer_spad file |
|
|
Linus Torvalds
|
0603006b45 |
SCSI misc on 20160805
This is seven basic fixes (plus one MAINTAINER update) which came in close to the merge window. Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJXpR8/AAoJEAVr7HOZEZN4QcgP/1YfBXT49Vr/CJyqysyUKbSQ adzjxu0n1L+5wN9/5Wp523cnpIuLKF8h2iWK3KrS4AB4zBzy78PhFXZ1bLzNFb+x e76vOClKHJ5cG52LCvF7JPTbCSV4VQHsGEOGiY6TXsNMOmLhwM0jQ+/YE7KjrOrj 3ICfwFgb32wsby5Dm/VhyCU7YTZUjd4gOny02Uft87cm2sto9CC5zZQvp0CXqnb9 8AHRwicrvar7E+Xvnq/AduFoxjalLGBYR1vbzBOmoolrWnNdz2Y9gPolzU9N8e8u 6Ybubsz3wdlx4wb9ckgxOYQy5C/zEwt9dqWdwzMUc394guB7lBOiZFYPm6t8Smpb +j8HYiVG717K7sb1N2GyCc1iuUC65Fq4yFjCVuos89ez/kbXZDCOLeGJ/Z24u7+T JDPL8GVJmMBhnHbtmiNndAnwGzGNN1tTJShm2MZhR8O3iW+jn/nODCSzBNtzD1x5 3z6q4aq+a87A7swc4W2eBKzGOjhRt4S46JqjHqZDUwl3Jt6eQZH0CZdHK2wn8bwG FaaMWGux6+tr0CRweLGhKRGeJGhGZLJVIVRg0p0j+WkDsljb3Vfr14EX4+gauTRB jBYTFrQlOgQZMRt8GaWhU+iqf3z0KcMcg5O6zHPOHCOEhATmRsj7iUAOHC+32xKj pl5STasmL7aNBzwfCRkq =826r -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is seven basic fixes (plus one MAINTAINER update) which came in close to the merge window" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ipr: Fix error return code in ipr_probe_ioa() fcoe: add missing destroy_workqueue() on error in fcoe_init() lpfc: Fix possible NULL pointer dereference fcoe: Use default VLAN for FIP VLAN discovery ipr: Wait to do async scan until scsi host is initialized MAINTAINERS: Update cxlflash maintainers cxlflash: Verify problem state area is mapped before notifying shutdown lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt() |
|
|
Logan Gunthorpe
|
a9c59ef774 |
ntb_test: Add a selftest script for the NTB subsystem
This script automates testing doorbells, scratchpads and memory windows for an NTB device. It can be run locally, with the NTB looped back to the same host or use SSH to remotely control the second host. In the single host case, the script just needs to be passed two arguments: a PCI ID for each side of the link. In the two host case the -r option must be used to specify the remote hostname (which must be SSH accessible and should probably have ssh-keys exchanged). A sample run looks like this: $ sudo ./ntb_test.sh 0000:03:00.1 0000:83:00.1 -p 29 Starting ntb_tool tests... Running link tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running link tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running db tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running db tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running spad tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running spad tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running mw0 tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running mw0 tests on: 0000:83:00.1 / 0000:03:00.1 Passed Running mw1 tests on: 0000:03:00.1 / 0000:83:00.1 Passed Running mw1 tests on: 0000:83:00.1 / 0000:03:00.1 Passed Starting ntb_pingpong tests... Running ping pong tests on: 0000:03:00.1 / 0000:83:00.1 Passed Starting ntb_perf tests... Running local perf test without DMA 0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s Passed Running remote perf test without DMA 0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s Passed Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Acked-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> |
|
|
Linus Torvalds
|
6c84239d59 |
RTC for 4.8
Cleanups:
- huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos,
rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
- move mn10300 to rtc-cmos
Subsystem:
- fix wakealarms after hibernate
- multiples fixes for rctest
- simplify implementations of .read_alarm
New drivers:
- Maxim MAX6916
Drivers:
- ds1307: fix weekday
- m41t80: add wakeup support
- pcf85063: add support for PCF85063A variant
- rv8803: extend i2c fix and other fixes
- s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP
TS-41x
- s3c: clock fixes
-----BEGIN PGP SIGNATURE-----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=rpGB
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"RTC for 4.8
Cleanups:
- huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
- move mn10300 to rtc-cmos
Subsystem:
- fix wakealarms after hibernate
- multiples fixes for rctest
- simplify implementations of .read_alarm
New drivers:
- Maxim MAX6916
Drivers:
- ds1307: fix weekday
- m41t80: add wakeup support
- pcf85063: add support for PCF85063A variant
- rv8803: extend i2c fix and other fixes
- s35390a: fix alarm reading, this fixes instant reboot after
shutdown for QNAP TS-41x
- s3c: clock fixes"
* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
rtc: rv8803: Clear V1F when setting the time
rtc: rv8803: Stop the clock while setting the time
rtc: rv8803: Always apply the I²C workaround
rtc: rv8803: Fix read day of week
rtc: rv8803: Remove the check for valid time
rtc: rv8803: Kconfig: Indicate rx8900 support
rtc: asm9260: remove .owner field for driver
rtc: at91sam9: Fix missing spin_lock_init()
rtc: m41t80: add suspend handlers for alarm IRQ
rtc: m41t80: make it a real error message
rtc: pcf85063: Add support for the PCF85063A device
rtc: pcf85063: fix year range
rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
rtc: s3c: Remove unnecessary call to disable already disabled clock
rtc: abx80x: use devm_add_action_or_reset()
rtc: m41t80: use devm_add_action_or_reset()
rtc: fix a typo and reduce three empty lines to one
rtc: s35390a: improve two comments in .set_alarm
...
|
|
|
Linus Torvalds
|
f8fbd8c49b |
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton: "A few late-breaking fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memblock.c: fix NULL dereference error MAINTAINERS: update cgroup's document path slub: drop bogus inline for fixup_red_left() powerpc/fsl_rio: fix a missing error code mm: initialise per_cpu_nodestats for all online pgdats at boot mm/memblock: fix a typo in a comment mm: disable CONFIG_MEMORY_HOTPLUG when KASAN is enabled |
|
|
Linus Torvalds
|
0cda611386 |
Round one of 4.8 code
- Updates/fixes for iw_cxgb4 driver
- Updates/fixes for mlx5 driver
- Add flow steering and RSS API
- Add hardware stats to mlx4 and mlx5 drivers
- Add firmware version API for RDMA driver use
- Add the rxe driver (this is a software RoCE driver that makes any
Ethernet device a RoCE device)
- Fixes for i40iw driver
- Support for send only multicast joins in the cma layer
- Other minor fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oZOO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull base rdma updates from Doug Ledford:
"Round one of 4.8 code: while this is mostly normal, there is a new
driver in here (the driver was hosted outside the kernel for several
years and is actually a fairly mature and well coded driver). It
amounts to 13,000 of the 16,000 lines of added code in here.
Summary:
- Updates/fixes for iw_cxgb4 driver
- Updates/fixes for mlx5 driver
- Add flow steering and RSS API
- Add hardware stats to mlx4 and mlx5 drivers
- Add firmware version API for RDMA driver use
- Add the rxe driver (this is a software RoCE driver that makes any
Ethernet device a RoCE device)
- Fixes for i40iw driver
- Support for send only multicast joins in the cma layer
- Other minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (72 commits)
Soft RoCE driver
IB/core: Support for CMA multicast join flags
IB/sa: Add cached attribute containing SM information to SA port
IB/uverbs: Fix race between uverbs_close and remove_one
IB/mthca: Clean up error unwind flow in mthca_reset()
IB/mthca: NULL arg to pci_dev_put is OK
IB/hfi1: NULL arg to sc_return_credits is OK
IB/mlx4: Add diagnostic hardware counters
net/mlx4: Query performance and diagnostics counters
net/mlx4: Add diagnostic counters capability bit
Use smaller 512 byte messages for portmapper messages
IB/ipoib: Report SG feature regardless of HW UD CSUM capability
IB/mlx4: Don't use GFP_ATOMIC for CQ resize struct
IB/hfi1: Disable by default
IB/rdmavt: Disable by default
IB/mlx5: Fix port counter ID association to QP offset
IB/mlx5: Fix iteration overrun in GSI qps
i40iw: Add NULL check for puda buffer
i40iw: Change dup_ack_thresh to u8
i40iw: Remove unnecessary check for moving CQ head
...
|
|
|
Linus Torvalds
|
fdf1f7ff1b |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger: "The most notable item is IBM virtual SCSI target driver, that was originally ported to target-core back in 2010 by Tomo-san, and has been brought forward to v4.x code by Bryant Ly, Michael Cyr and co over the last months. Also included are two ORDERED task related bug-fixes Bryant + Michael found along the way using ibmvscsis with AIX guests, plus a few miscellaneous target-core + iscsi-target bug-fixes with associated stable tags" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: fix spelling mistake: "limitiation" -> "limitation" target: Fix residual overflow handling in target_complete_cmd_with_length tcm_fc: set and unset FCP_SPPF_TARG_FCN iscsi-target: Fix panic when adding second TCP connection to iSCSI session ibmvscsis: Initial commit of IBM VSCSI Tgt Driver target: Fix ordered task CHECK_CONDITION early exception handling target: Fix ordered task target_setup_cmd_from_cdb exception hang target: Fix max_unmap_lba_count calc overflow target: Fix race between iscsi-target connection shutdown + ABORT_TASK target: Fix missing complete during ABORT_TASK + CMD_T_FABRIC_STOP |
|
|
seokhoon.yoon
|
4b16b0c0bf |
MAINTAINERS: update cgroup's document path
cgroup's document path is changed to "cgroup-v1". update it. Link: http://lkml.kernel.org/r/1470322507-5161-1-git-send-email-iamyooon@gmail.com Signed-off-by: seokhoon.yoon <iamyooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Moni Shoua
|
8700e3e7c4 |
Soft RoCE driver
Soft RoCE (RXE) - The software RoCE driver
ib_rxe implements the RDMA transport and registers to the RDMA core
device as a kernel verbs provider. It also implements the packet IO
layer. On the other hand ib_rxe registers to the Linux netdev stack
as a udp encapsulating protocol, in that case RDMA, for sending and
receiving packets over any Ethernet device. This yields a RDMA
transport over the UDP/Ethernet network layer forming a RoCEv2
compatible device.
The configuration procedure of the Soft RoCE drivers requires
binding to any existing Ethernet network device. This is done with
/sys interface.
A userspace Soft RoCE library (librxe) provides user applications
the ability to run with Soft RoCE devices. The use of rxe verbs ins
user space requires the inclusion of librxe as a device specifics
plug-in to libibverbs. librxe is packaged separately.
Architecture:
+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
+---------------------------------------------------------------+
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------------------------------------+
| Application |
+-----------------------------------------------------------+
+-----------------------------------+
| libibverbs |
User +-----------------------------------+
+----------------+ +----------------+
| librxe | | HW RoCE lib |
+----------------+ +----------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+--------------+ +------------+
| Sockets | | RDMA ULP |
+--------------+ +------------+
+--------------+ +---------------------+
| TCP/IP | | ib_core |
+--------------+ +---------------------+
+------------+ +----------------+
Kernel | ib_rxe | | HW RoCE driver |
+------------+ +----------------+
+------------------------------------+
| NIC driver |
+------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Soft RoCE resources:
[1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in
Github
[2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE
Wiki page
[3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
|
Kamil Debski
|
774e0362b2 |
MAINTAINERS: update email and list of Samsung HW driver maintainers
Change my email address in the MAINTAINERS file. Add new maintainers of selected Samsung HW drivers. Link: http://lkml.kernel.org/r/1470060703-20423-1-git-send-email-k.debski@samsung.com Signed-off-by: Kamil Debski <k.debski@samsung.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kamil Debski <kamil@wypas.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
d52bd54db8 |
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton: - the rest of ocfs2 - various hotfixes, mainly MM - quite a bit of misc stuff - drivers, fork, exec, signals, etc. - printk updates - firmware - checkpatch - nilfs2 - more kexec stuff than usual - rapidio updates - w1 things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) ipc: delete "nr_ipc_ns" kcov: allow more fine-grained coverage instrumentation init/Kconfig: add clarification for out-of-tree modules config: add android config fragments init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig relay: add global mode support for buffer-only channels init: allow blacklisting of module_init functions w1:omap_hdq: fix regression w1: add helper macro module_w1_family w1: remove need for ida and use PLATFORM_DEVID_AUTO rapidio/switches: add driver for IDT gen3 switches powerpc/fsl_rio: apply changes for RIO spec rev 3 rapidio: modify for rev.3 specification changes rapidio: change inbound window size type to u64 rapidio/idt_gen2: fix locking warning rapidio: fix error handling in mbox request/release functions rapidio/tsi721_dma: advance queue processing from transfer submit call rapidio/tsi721: add messaging mbox selector parameter rapidio/tsi721: add PCIe MRRS override parameter rapidio/tsi721_dma: add channel mask and queue size parameters ... |
|
|
Rob Herring
|
27eb6622ab |
config: add android config fragments
Copy the config fragments from the AOSP common kernel android-4.4 branch. It is becoming possible to run mainline kernels with Android, but the kernel defconfigs don't work as-is and debugging missing config options is a pain. Adding the config fragments into the kernel tree, makes configuring a mainline kernel as simple as: make ARCH=arm multi_v7_defconfig android-base.config android-recommended.config The following non-upstream config options were removed: CONFIG_NETFILTER_XT_MATCH_QTAGUID CONFIG_NETFILTER_XT_MATCH_QUOTA2 CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG CONFIG_PPPOLAC CONFIG_PPPOPNS CONFIG_SECURITY_PERF_EVENTS_RESTRICT CONFIG_USB_CONFIGFS_F_MTP CONFIG_USB_CONFIGFS_F_PTP CONFIG_USB_CONFIGFS_F_ACC CONFIG_USB_CONFIGFS_F_AUDIO_SRC CONFIG_USB_CONFIGFS_UEVENT CONFIG_INPUT_KEYCHORD CONFIG_INPUT_KEYRESET Link: http://lkml.kernel.org/r/1466708235-28593-1-git-send-email-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Rom Lemarchand <romlem@android.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Ryusuke Konishi
|
e63e88bc53 |
nilfs2: move ioctl interface and disk layout to uapi separately
The header file "include/linux/nilfs2_fs.h" is composed of parts for ioctl and disk format, and both are intended to be shared with user space programs. This moves them to the uapi directory "include/uapi/linux" splitting the file to "nilfs2_api.h" and "nilfs2_ondisk.h". The following minor changes are accompanied by this migration: - nilfs_direct_node struct in nilfs2/direct.h is converged to nilfs2_ondisk.h because it's an on-disk structure. - inline functions nilfs_rec_len_from_disk() and nilfs_rec_len_to_disk() are moved to nilfs2/dir.c. Link: http://lkml.kernel.org/r/1465825507-3407-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Luis de Bethencourt
|
db4ad0360c |
MAINTAINERS: befs: add new maintainers
Salah Triki and Luis de Bethencourt are taking over maintainership of befs. Link: http://lkml.kernel.org/r/1469651079-32455-1-git-send-email-luisbg@osg.samsung.com Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
c8d0267efd |
PCI changes for the v4.8 merge window:
Enumeration
Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
Add parent device field to ECAM struct pci_config_window (Jayachandran C)
Add generic MCFG table handling (Tomasz Nowicki)
Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management
Add devm_request_pci_bus_resources() (Bjorn Helgaas)
Unify pci_resource_to_user() declarations (Bjorn Helgaas)
Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
Ignore write combining when mapping I/O port space (Bjorn Helgaas)
Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
Support I/O resources when parsing host bridge resources (Jayachandran C)
Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug
Allow additional bus numbers for hotplug bridges (Keith Busch)
Ignore interrupts during D3cold (Lukas Wunner)
Power management
Enforce type casting for pci_power_t (Andy Shevchenko)
Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
Put PCIe ports into D3 during suspend (Mika Westerberg)
Power on bridges before scanning new devices (Mika Westerberg)
Runtime resume bridge before rescan (Mika Westerberg)
Add runtime PM support for PCIe ports (Mika Westerberg)
Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization
Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI
Fix PCI_MSI dependencies (Arnd Bergmann)
Add pci_msix_desc_addr() helper (Christoph Hellwig)
Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling
Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
Remove DPC tristate module option (Keith Busch)
Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver
Select IRQ_DOMAIN (Arnd Bergmann)
Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver
Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver
Check link status before retrain link (Ley Foon Tan)
Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver
Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver
Use lock save/restore in interrupt enable path (Jon Derrick)
Select device dma ops to override (Keith Busch)
Initialize list item in IRQ disable (Keith Busch)
Use x86_vector_domain as parent domain (Keith Busch)
Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver
Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
Add Aardvark PCI host controller driver (Thomas Petazzoni)
Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver
Fix interrupt cleanup path (Cathy Avery)
Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver
Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
Use lower-case hex consistently for register definitions (Thierry Reding)
Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver
Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver
Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver
Fix return value in case of error (Christophe JAILLET)
Miscellaneous
Make bus_attr_resource_alignment static (Ben Dooks)
Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
Make host bridge drivers explicitly non-modular (Paul Gortmaker)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NVxu
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Highlights:
- ARM64 support for ACPI host bridges
- new drivers for Axis ARTPEC-6 and Marvell Aardvark
- new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx
- pci_resource_to_user() cleanup (more to come)
Detailed summary:
Enumeration:
- Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
- Add parent device field to ECAM struct pci_config_window (Jayachandran C)
- Add generic MCFG table handling (Tomasz Nowicki)
- Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
- Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
Resource management:
- Add devm_request_pci_bus_resources() (Bjorn Helgaas)
- Unify pci_resource_to_user() declarations (Bjorn Helgaas)
- Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
- Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
- Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
- Ignore write combining when mapping I/O port space (Bjorn Helgaas)
- Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
- Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
- Support I/O resources when parsing host bridge resources (Jayachandran C)
- Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
- Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
- Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
- Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
- Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
- Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
- Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
- Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
PCI device hotplug:
- Allow additional bus numbers for hotplug bridges (Keith Busch)
- Ignore interrupts during D3cold (Lukas Wunner)
Power management:
- Enforce type casting for pci_power_t (Andy Shevchenko)
- Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
- Put PCIe ports into D3 during suspend (Mika Westerberg)
- Power on bridges before scanning new devices (Mika Westerberg)
- Runtime resume bridge before rescan (Mika Westerberg)
- Add runtime PM support for PCIe ports (Mika Westerberg)
- Remove redundant check of pcie_set_clkpm (Shawn Lin)
Virtualization:
- Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
- Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
- Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
- Add ACS quirk for Solarflare SFC9220 (Edward Cree)
MSI:
- Fix PCI_MSI dependencies (Arnd Bergmann)
- Add pci_msix_desc_addr() helper (Christoph Hellwig)
- Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
- Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
- Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
- Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
Error Handling:
- Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
- Remove DPC tristate module option (Keith Busch)
- Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
Generic host bridge driver:
- Select IRQ_DOMAIN (Arnd Bergmann)
- Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
ACPI host bridge driver:
- Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
- Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
- Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
- Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
Altera host bridge driver:
- Check link status before retrain link (Ley Foon Tan)
- Poll for link up status after retraining the link (Ley Foon Tan)
Axis ARTPEC-6 host bridge driver:
- Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
- Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
- Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
Intel VMD host bridge driver:
- Use lock save/restore in interrupt enable path (Jon Derrick)
- Select device dma ops to override (Keith Busch)
- Initialize list item in IRQ disable (Keith Busch)
- Use x86_vector_domain as parent domain (Keith Busch)
- Separate MSI and MSI-X vector sharing (Keith Busch)
Marvell Aardvark host bridge driver:
- Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
- Add Aardvark PCI host controller driver (Thomas Petazzoni)
- Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
Microsoft Hyper-V host bridge driver:
- Fix interrupt cleanup path (Cathy Avery)
- Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
- Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
NVIDIA Tegra host bridge driver:
- Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
- Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
- Use lower-case hex consistently for register definitions (Thierry Reding)
- Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
- Stop setting pcibios_min_mem (Thierry Reding)
Renesas R-Car host bridge driver:
- Drop gen2 dummy I/O port region (Bjorn Helgaas)
TI DRA7xx host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Xilinx AXI host bridge driver:
- Fix return value in case of error (Christophe JAILLET)
Miscellaneous:
- Make bus_attr_resource_alignment static (Ben Dooks)
- Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
- MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
- Make host bridge drivers explicitly non-modular (Paul Gortmaker)"
* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
PCI: xgene: Make explicitly non-modular
PCI: thunder-pem: Make explicitly non-modular
PCI: thunder-ecam: Make explicitly non-modular
PCI: tegra: Make explicitly non-modular
PCI: rcar-gen2: Make explicitly non-modular
PCI: rcar: Make explicitly non-modular
PCI: mvebu: Make explicitly non-modular
PCI: layerscape: Make explicitly non-modular
PCI: keystone: Make explicitly non-modular
PCI: hisi: Make explicitly non-modular
PCI: generic: Make explicitly non-modular
PCI: designware-plat: Make it explicitly non-modular
PCI: artpec6: Make explicitly non-modular
PCI: armada8k: Make explicitly non-modular
PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
PCI: Add ACS quirk for Solarflare SFC9220
arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
PCI: aardvark: Add Aardvark PCI host controller driver
dt-bindings: add DT binding for the Aardvark PCIe controller
PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
...
|