Newer asics have a two levels of irq ids now:
client id - the IP
src id - the interrupt src within the IP
v2: integrated Christian's comments.
v3: fix rebase fail in SI and CIK
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics need 64 bit doorbells.
v2: fix comment (Nils)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics need 64 bit writeback slots.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics need 64 bit wptrs. If the wptr is now
smaller than the rptr that doesn't indicate a wrap-around
anymore.
v2: integrate Christian's comments.
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: agd: move apertures to mc structure
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Again no apparent explanation for the split except hysterical raisins.
Merging them also makes it a bit more obviuos what's going on wrt the
runtime pm refdancing.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This information is intended to provide the required data to associate
amdgpu tracepoints with their corresponding dma_fence_* events.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the traces have uniform format except for two of them. Having
all the traces match makes it simple to run awk on the ftrace output.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because different HWs have different definition for CE & DE meta
data, follow mqd design to move the structures to vi_structs.h.
And change the prefix from amdgpu to vi as the structures is only
for VI family.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used in a while.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We completely bypass the HDP now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a more common logging style.
Miscellanea:
o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using 'printk("\n")' is not preferred anymore and
using printk to continue logging messages now produces
multiple line logging output unless the continuations
use KERN_CONT.
Convert these uses to appropriately use pr_cont or a
single printk where possible.
Miscellanea:
o Use a temporary const char * instead of multiple printks
o Remove trailing space from logging by using a leading space instead
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There still seem to be some blocks that make accesses
in the lower part of the address space. This works around
this.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program the VCE BAR and offsets properly. The current code
was carried over from a limitation from older VCE versions.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.orgamd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, manually insmod/rmmod amdgpu is necessary. When
unloading amdgpu, the KIQ IRQ enable/disable function will case
system hang. The root cause is, in the sequence of function
amdgpu_fini, the sw_fini of IP block AMD_IP_BLOCK_TYPE_GFX will be
invoked earlier than that of AMD_IP_BLOCK_TYPE_IH. So continue to use
the variable freed by AMD_IP_BLOCK_TYPE_GFX will cause system hang.
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu < Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: move the config struct to drm_amdgpu_info_device
v3: move the config feature to amdgpu_gca_config
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to free mqd backup when destroying ring.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When send messages to hypervior, the messages format should be is
idh_request, not idh_event.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vi_mqd is only used by VI family but mqd_ptr and mqd_backup is
common for all ASIC, so change the pointer to void.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
use in_rest to fix compute ring test failure issue
which occured after FLR/gpu_reset.
we need backup a clean status of MQD which was created in drv load
stage, and use it in resume stage, otherwise KCQ and KIQ all may
faild in ring/ib test.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In resume routine, we need clr RB prior to the
ring test of engine, otherwise some engine hang
duplicated during GPU reset.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we can use it clear ring buffer instead of fullfill
0, which is not correct for engine
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is required for restoring the mqds after GPU reset.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use it to seperate driver load and gpu reset/resume
because gfx IP need different approach for different
hw_init trigger source
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this flag will get cleared by request gpu access
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no need to use a delay work since we don't know how
much time hypervisor takes on FLR, so just polling
and waiting in a work.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use no kiq version reg access due to:
1) better performance
2) INTR context consideration (some routine in mailbox is in
INTR context e.g.xgpu_vi_mailbox_rcv_irq)
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
some registers are PF & VF copy, and we can safely use
mmio method to access them.
and sometime we are forbid to use kiq to access registers
for example in INTR context.
we need a MACRO that always disable KIQ for regs accessing
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change-Id: Ica8f86577a50d817119de4b4fb95068dc72652a9
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By using ttm_bo_init_reserved instead of the manual initialization of
the reservation object, the reservation lock will be properly unlocked
and destroyed when the TTM BO initialization fails.
Actual deadlocks caused by the missing unlock should have been fixed
by "drm/ttm: never add BO that failed to validate to the LRU list",
superseding the flawed fix in commit 38fc4856ad ("drm/amdgpu: fix
a potential deadlock in amdgpu_bo_create_restricted()").
This change fixes remaining recursive locking errors that can be seen
with lock debugging enabled, and avoids the error of freeing a locked
mutex.
As an additional minor bonus, buffers created with resv == NULL and
the AMDGPU_GEM_CREATE_VRAM_CLEARED flag are now only added to the
global LRU list after the fill commands have been issued.
v2: use amdgpu_bo_unreserve instead of ttm_bo_unreserve
Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 38fc4856ad, which
introduces a use-after-free.
The underlying bug should be properly fixed with "drm/ttm: never add BO
that failed to validate to the LRU list".
Cc: zhoucm1 <david1.zhou@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This includes shader/memory clocks, temperature, GPU load, etc.
v2: - add sub-queries for AMDPGU_INFO_GPU_SENSOR_*
- do not break the ABI
v3: - return -ENOENT when amdgpu_dpm == 0
- expose more sensor queries
v4: - s/GPU_POWER/GPU_AVG_POWER/
- improve VDDNB/VDDGFX query description
- fix amdgpu_dpm check
v5: - agd: fix warning
v6: - agd: bump version
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
read_sensor() has been recently implemented for dpm based boards
which means amdgpu_sensors can now be exposed.
v2: - make sure read_sensor is not NULL on dpm chips
- keep sanity check for powerplay chips
v3: - make sure amdgpu_dpm != 0
Cc: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the GPU temperature, the shader clock and eventually the
memory clock (as well as the GPU load on CI). The main goal is
to expose this info to the userspace like Radeon.
v2: - add AMDGPU_PP_SENSOR_GPU_LOAD on CI
- update the commit description
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: new approach fixing this by registering a fence callback for
all users of the VM on teardown
v3: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't assume kmalloc will always succeed.
v2: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When two VMs stop using PRT support at the same time we might
not disable it in the right order otherwise.
v2: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those should be 64bit, even on a 32bit system.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This update allows sensors to return more than 1 value and
indicates to the caller how many bytes are written.
The debugfs interface has been updated to handle reading all
of the values. Simply seek to the enum value (multiplied
by 4) and then read as many bytes as the sensor provides.
(v2): Don't set size to 4 before reading GPU_POWER
(v3): agd: rebase
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: set correct register
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: set correct register
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher