Commit Graph

12253 Commits

Author SHA1 Message Date
Sergei Shtylyov 8fd763c75c ARM: dts: r8a7792: add SMP support
Add the device tree nodes for the Advanced Power Management Unit (APMU)
and the second Cortex-A15 CPU core.
Use the "enable-method" prop  to point out that the APMU should be used
for the SMP support.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-30 14:26:14 +02:00
David S. Miller ee58b57100 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Several cases of overlapping changes, except the packet scheduler
conflicts which deal with the addition of the free list parameter
to qdisc_enqueue().

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 05:03:36 -04:00
Magnus Damm 65b133cd79 ARM: dts: r8a7793: Add APMU node and second CPU core
Add DT nodes for the Advanced Power Management Unit (APMU) and the
second CPU core.  Use the enable-method to point out that the APMU
should be used for SMP support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:30:30 +02:00
Magnus Damm 477cbcbd8f ARM: dts: r8a7791: Add APMU node
Add a DT node for the Advanced Power Management Units (APMU), and use
the enable-method to point out that the APMU should be used for SMP
support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:28:42 +02:00
Magnus Damm dc37879515 ARM: dts: r8a7790: Add APMU nodes
Add DT nodes for the Advanced Power Management Units (APMU), and use the
enable-method to point out that the APMU should be used for SMP
support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:28:27 +02:00
Geert Uytterhoeven 54389e981c ARM: dts: kzm9g: Update console parameters
Change the console alias to "serial0", for consistency with other
boards (the first unlabeled serial port is always called "serial0").
This does change the serial console from /dev/ttySC4 to /dev/ttySC0.
Add the serial port config to "chosen/stdout-path", which requires
referring to the port by alias.
Drop the "console=" parameters from the kernel command line, as they're
no longer needed for DT-based platforms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:19:42 +02:00
Geert Uytterhoeven 20fc3188ac ARM: dts: kzm9d: Update console parameters
Add a "serial1" alias for the serial console (it is labeled "uart1").
Add the serial port config to "chosen/stdout-path", which requires
referring to the port by alias.
Drop the "console=" parameter from the kernel command line, as it's no
longer needed for DT-based platforms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:19:28 +02:00
Geert Uytterhoeven 822337d7ff ARM: dts: marzen: Add serial port config to chosen/stdout-path
Add the serial port config to "chosen/stdout-path", which requires
referring to the port by alias.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:19:14 +02:00
Geert Uytterhoeven be6bebae60 ARM: dts: genmai: Update console parameters
Change the console alias to "serial0", for consistency with other
boards (the first unlabeled serial port is always called "serial0").
This does change the serial console from /dev/ttySC2 to /dev/ttySC0.
Add the serial port config to "chosen/stdout-path", which requires
referring to the port by alias.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:18:57 +02:00
Geert Uytterhoeven 1403e38b82 ARM: dts: armadillo800eva: Update console parameters
Change the console alias to "serial0", for consistency with other
boards (the first unlabeled serial port is always called "serial0").
This does change the serial console from /dev/ttySC1 to /dev/ttySC0.
Add the serial port config to "chosen/stdout-path", which requires
referring to the port by alias.
Drop the "console=" parameters from the kernel command line, as they're
no longer needed for DT-based platforms.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-29 14:18:32 +02:00
Stefan Agner 229d641d72 ARM: dts: meson: minix-neo-x8: define PMIC as power controller
The PMIC driver used to register itself as poweroff controller by
default, hence assuming that this device is using the PMIC as
system power controller.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29 10:09:30 +01:00
Javier Martinez Canillas 480985b06c ARM: dts: am57xx: sbc-am57x: remove unneded unit name
This patch fixes the following DTC warnings for am57xx-sbc-am57x.dtb:

"endpoint@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:39 -07:00
Javier Martinez Canillas e6db7f1ab2 ARM: dts: omap5-board-common: remove unneded unit names
This patch fixes the following DTC warnings for omap5-igep0050.dtb,
omap5-sbc-t54.dtb and omap5-uevm.dtb:

"connector@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"encoder@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:38 -07:00
Javier Martinez Canillas 3a76e98840 ARM: dts: omap5-cm-t54: remove unneded unit names and add reg properties
This patch fixes the following DTC warnings for omap5-cm-t54.dtb:

"connector@0 has a unit name, but no reg property"
"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:38 -07:00
Javier Martinez Canillas a264578805 ARM: dts: am437x: cm-t43: remove unneded unit names
This patch fixes the following DTC warnings for am437x-sbc-t43.dtb:

"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:37 -07:00
Javier Martinez Canillas 7d304f73ef ARM: dts: am437x-gp-evm: remove unneded unit name
This patch fixes the following DTC warnings for am437x-gp-evm.dtb:

"endpoint@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:36 -07:00
Javier Martinez Canillas bc8bffd047 ARM: dts: am43xx-epos-evm: remove unneded unit name
This patch fixes the following DTC warnings for am43xx-epos-evm.dtb:

"endpoint@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:36 -07:00
Javier Martinez Canillas b536ccbfff ARM: dts: omap4-var-om44customboard: remove unneded unit name
This patch fixes the following DTC warnings for omap4-var-dvk-om44.dtb
and omap4-var-stk-om44.dtb:

"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:35 -07:00
Javier Martinez Canillas f9a1017a9a ARM: dts: omap4-sdp: remove unneded unit names
This patch fixes the following DTC warnings for omap4-sdp.dtb
and omap4-sdp-es23plus.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:34 -07:00
Javier Martinez Canillas 9e19d0d1cd ARM: dts: omap4-panda-common: remove unneded unit names
This patch fixes the following DTC warnings for omap4-panda.dtb,
omap4-panda-a4.dtb and omap4-panda-es.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"encoder@1 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:34 -07:00
Javier Martinez Canillas a8339ccebd ARM: dts: omap4-duovero-parlor: remove unneded unit name
This patch fixes the following DTC warnings for omap4-duovero-parlor.dtb:

"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:33 -07:00
Javier Martinez Canillas 22a0f93b73 ARM: dts: omap3-thunder: remove unneded unit name
This patch fixes the following DTC warnings for omap3-thunder.dtb:

"display@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:32 -07:00
Javier Martinez Canillas ece8410a51 ARM: dts: sbc-t3x30: remove unneded unit names
This patch fixes the following DTC warnings for omap3-sbc-t3517.dtb,
omap3-sbc-t3530.dtb and omap3-sbc-t3730.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:31 -07:00
Javier Martinez Canillas f82bc163b7 ARM: dts: omap3-pandora-common: remove unneded unit name
This patch fixes the following DTC warnings for omap3-pandora-600mhz.dtb
and omap3-pandora-1ghz.dtb:

"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:30 -07:00
Javier Martinez Canillas e4fab1f4a3 ARM: dts: omap3-overo-common-dvi: remove unneded unit names
This patch fixes the following DTC warnings for omap3-overo-summit.dtb,
omap3-overo-storm-tobi.dtb, omap3-overo-storm-summit.dtb and
omap3-overo-tobi.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:30 -07:00
Javier Martinez Canillas d0cdbd0860 ARM: dts: omap3-igep0020-common: remove unneded unit names
This patch fixes the following DTC warnings for omap3-igep0020.dtb
and omap3-igep0020-rev-f.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:29 -07:00
Javier Martinez Canillas b8d368caa8 ARM: dts: omap3: overo: remove unneded unit names in display nodes
This patch fixes the following DTC warnings for omap3-overo-gallop43.dtb,
omap3-overo-chestnut43.dtb, omap3-overo-storm-chestnut43.dtb,
omap3-overo-palo43.dtb, and omap3-overo-storm-palo43.dtb:

"display@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:28 -07:00
Javier Martinez Canillas f41c1c1823 ARM: dts: omap3-ha-lcd: remove unneeded unit name
This patch fixes the following DTC warnings for omap3-ha-lcd.dtb:

"display@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:28 -07:00
Javier Martinez Canillas 314fdd5de1 ARM: dts: omap3-gta04: remove unneeded unit names
This patch fixes the following DTC warnings for omap3-gta04a3.dtb,
omap3-gta04a4.dtb and omap3-gta04a5.dtb:

"dmtimer-pwm@11 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:27 -07:00
Javier Martinez Canillas a346cea1af ARM: dts: omap3-devkit8000-lcd-common: remove unneeded unit names
This patch fixes the following DTC warnings for omap3-devkit8000-lcd43.dtb
and omap3-devkit8000-lcd70.dtb:

"display@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:26 -07:00
Javier Martinez Canillas 80ca8bed60 ARM: dts: omap3-devkit8000: remove unneeded unit names
This patch fixes the following DTC warnings for omap3-devkit8000.dtb,
omap3-devkit8000-lcd43.dtb and omap3-devkit8000-lcd70.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:25 -07:00
Javier Martinez Canillas bc1dcd57d6 ARM: dts: cm-t3x: remove unneeded unit name in connector
This patch fixes the following DTC warnings for omap3-cm-t3517.dtb,
omap3-cm-t3530.dtb and omap3-cm-t3730.dtb:

"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:25 -07:00
Javier Martinez Canillas a58280e5b1 ARM: dts: omap3-beagle-xm: remove unneeded unit names
This patch fixes the following DTC warnings for omap3-beagle-xm.dtb:

"encoder@0 has a unit name, but no reg property"
"encoder@0/ports/port@0/endpoint@0 has a unit name, but no reg property"
"encoder@0/ports/port@1/endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:24 -07:00
Javier Martinez Canillas a3c4c7578a ARM: dts: omap3-beagle: remove unneeded unit names
This patch fixes the following DTC warnings for omap3-beagle.dtb:

"encoder@0 has a unit name, but no reg property"
"encoder@0/ports/port@0/endpoint@0 has a unit name, but no reg property"
"encoder@0/ports/port@1/endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"
"connector@1 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:23 -07:00
Javier Martinez Canillas cc9a4bdada ARM: dts: n900: remove unneeded unit name for dmtimer-pwm
This patch fixes the following DTC warnings for omap3-n900.dtb:

"dmtimer-pwm@9 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:23 -07:00
Javier Martinez Canillas 5ce86920da ARM: dts: dm3730-torpedo-devkit: remove unneeded unit names
This patch fixes the following DTC warnings:

"dmtimer-pwm@10 has a unit name, but no reg property"
"display@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:22 -07:00
Javier Martinez Canillas d5213c0deb ARM: dts: am3517-craneboard: remove unneeded unit name for fixedregulator
This patch fixes the following DTC warnings for am3517-craneboard.dtb:

"fixedregulator@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:21 -07:00
Javier Martinez Canillas b006261849 ARM: dts: omap2: add missing unit name to func_96m_ck
This patch fixes the following DTC warnings for omap2430-sdp.dtb:

"func_96m_ck has a reg or ranges property, but no unit name"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-29 00:05:21 -07:00
Hans de Goede eee25ab19d ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock
Fix pll3x2 and pll7x2 not having a parent clock, specifically this
fixes the kernel turning of pll3 while simplefb is using it when
uboot has configured things to use pll3x2 as lcd ch clk parent.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-29 09:03:13 +02:00
Florian Fainelli f8c331bda6 ARM: dts: BCM5301x: Add BCM953012ER board
Add support for the Broadcom BCM953012 Enterprise Router reference
board, enable the following peripherals:

- UART0 (UART1 is not populated)
- WPS and restart GPIO buttons
- Ethernet switch w/ only two facing ports
- NAND flash
- SPI-NOR flash

Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-28 18:06:06 -07:00
Grygorii Strashko 9efd1a6f60 ARM: dts: am335x/am437x/dra7: use new "ti, cpsw-mdio" compat string
Add "ti,cpsw-mdio" for am335x/am437x/dra7 SoCs where MDIO is
implemented as part of TI CPSW and, this way, enable PM runtime auto
suspend for Davinci MDIO driver on these paltforms.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28 08:57:19 -04:00
Stefan Agner b326629f25 ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support
Add support for the Computer on Module Colibri iMX7S/iMX7D along
with the development/evaluation carrier board device trees. Follow
the usual hierarchic include model, maintaining shared configuration
in imx7-colibri.dtsi and imx7-colibri-eval-v3.dtsi respectively.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 10:45:37 +08:00
Stefan Agner 1e886a18e0 ARM: dts: imx7d: move input header into base device tree
The base device tree uses KEY_POWER in the snvs-powerkey node,
hence include the input.h header file in the base device tree.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 10:45:33 +08:00
Stefan Agner a67970a226 ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics
The i.MX 7Solo implements a subset of features available on
i.MX 7Dual. Recreate imx7s.dtsi as the base device tree for
i.MX 7Dual boards. The i.MX 7Dual's additional features over
i.MX 7Solo are:
- Second Cortex-A7 core
- Second Gigabit Ethernet controller
- EPD (Electronc Paper Display, not yet part of the device tree)
- PCIe (not yet part of the device tree)
- Additional USB2.0 OTG controller

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 10:45:30 +08:00
Stefan Agner 3ef79ca6bd ARM: dts: imx7d: use imx7s.dtsi as base device tree
The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
7Dual. The former has a subset of features of the latter, hence
use imx7s.dtsi as the new base device tree. To keep diffstat nice,
just move imx7d.dtsi to imx7s.dtsi temporarily and recreate
imx7d.dtsi in a second commit.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 10:45:23 +08:00
Diego Dorta d09e6beafa ARM: dts: imx7d-sdb: Add support for touchscreen
Add support for tsc2046 touchscreen.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 09:59:10 +08:00
Diego Dorta 419690556f ARM: dts: imx7d-sdb: Add display support
Add support for the LCD8000-43T display.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 09:59:07 +08:00
Diego Dorta b754af313f ARM: dts: imx7d: Add SPI support
Add ecspi nodes and aliases.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 09:59:03 +08:00
Ken Lin fe4b467da6 ARM: dts: imx6q-bx50v3: Add gpio power off support
bx50v3 boards can be powered off via GPIO, this patch specifies the GPIO to
be used with the gpio-poweroff driver.

Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-28 09:54:10 +08:00
twp@codeaurora.org c3d5313001 dts: ipq4019: support ARMv7 PMU
Add support for cortex-a7-pmu present on ipq4019 SoCs.

Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:37:00 -05:00
Linus Walleij 4892e0756c ARM: dts: add Qualcomm APQ8060-based Dragonboard
This is the first Dragonboard based on APQ8060 and PM8058. It
was produced in 2011 in cooperation between Qualcomm and
BSQUARE.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:59 -05:00
Linus Walleij 1758b35808 ARM: dts: move the fixed MMC regulator to SURF board
There is currently a fixed regulator in the .dtsi file for
the MSM8660 chipset, used by the SURF board. We want to define
real regulators for a board using this chipset, so push the fixed
regulator down to the SURF board which is the only user.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:58 -05:00
Linus Walleij e20fd3364c ARM: dts: fix the MSM8660 RTC base address
The RTC was defined on 0x11d but on the MSM8660/APQ8060 it is
actually on 0x1e8. We were saved by the fact that the driver does
not use the reg parameter: instead it uses the compatible string
to figure out where the RTC is.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:57 -05:00
Linus Walleij c51cb1a156 ARM: dts: add I2C block in GSBI12
The I2C block on the GSBI12 is used on the APQ8060 Dragonboard for
sensors. Make it available in the chipset file.

Take this opportunity to fix the IRQ flag "0" to "NONE" using the
IRQ DT include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:57 -05:00
Linus Walleij 30b4fb1cc4 ARM: dts: add L2CC and RPM with regulators for MSM8660
This adds the L2CC IPC resource and RPM devices plus the nodes
for the PM8901 and PM8058 regulators to the MSM8660 device tree.
This was tested on the APQ8060 Dragonboard.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:56 -05:00
Linus Walleij 5f7610076e ARM: dts: add SDCC5 to Qualcomm MSM8660
The SDCC5 SD/MMC controller is used for a second uSD slot
on the APQ8060 Dragonboard. On most other systems it is just
dark silicon so define it and leave it as "disabled" in the core
SoC file.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:56 -05:00
Linus Walleij 0840ea9e44 ARM: dts: add GPIO and MPP to MSM8660 PMIC
This adds the 8660 PMIC GPIO and MPP blocks to the MSM8660
DTSI. Verified against the vendor tree to be in these locations
with these interrupts, tested on the APQ8060 Dragonboard.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:55 -05:00
John Stultz 72f3cd64dc device-tree: nexus7: Remove power gpio key entry and use pmic8xxx-pwrkey
Since the pmic8xxx-pwrkey driver is already supported in the
qcom-apq8064.dtsi, and the pmic8xxx-pwrkey supports logic to
configure proper device shutdown when ps_hold goes low, it is
better to use that driver then a generic gpio button.

Thus this patch remove the gpio power key entry here, so we
don't get double input events from having two drivers enabled.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:54 -05:00
Andy Gross 30f1e2dde6 arm: dts: qcom: Update smem state cells usage
This patch updates the qcom,state-cells to qcom,smem-state-cells to
match recent changes to the binding.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:54 -05:00
Andy Gross d32bfe101f ARM: dts: qcom: msm8974-honami: Set DMA as remotely controlled
This patch adds the qcom,controlled-remotely property for the blsp2_bam
controller node.  This board requires this, otherwise the board fails to
boot due to access of protected registers during BAM initialization.

Fixes: 62bc817922 dts: msm8974: Add blsp2_bam dma node

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-27 17:36:53 -05:00
Parth Pancholi 93b8e6fda1 ARM: dts: sd_600eval: Fix eMMC lockup issue
This board locks up if we stress test the eMMC, as the regulator s4 is
unable to supply enough current for all the peripherials attached to it.
As this supply is wired up to most of the peripherials including DDR,
it resulted in such lockup.

This patch fixes this issue by setting s4 regulator correctly with
Auto power mode.

Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
[Srinivas Kandagatla: rewrote the change log]
Tested-by: Girish Sharma <girish.sharma@einfochips.com>
Signed-off-by: Parth Pancholi <parth.pancholi@einfochips.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:53 -05:00
Srinivas Kandagatla 5f963e2951 ARM: dts: apq8064: rename db600c to SD_600eval
This board has been renamed recently and announced at
https://eragon.einfochips.com/products/sd-600eval.html

So rename this board files so that it reflects actual product in market.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:52 -05:00
Srinivas Kandagatla c351c254ac ARM: dts: apq8064: move sdcc3 pinctrls out of baord file
This patch move sdcc3 pinctrl nodes out of board file, so that
other boards do not duplicate the same thing.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:51 -05:00
Srinivas Kandagatla ccd140b574 ARM: dts: apq8064: move sdcc1 pinctrl nodes to soc file
This patch moves out the sdcc1 pinctrl nodes out of board files to soc file,
so that it will be duplicated in other board files.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-27 17:36:51 -05:00
Xing Zheng 241eff3c19 ARM: dts: rockchip: add support rk3229 evb board
Initial release for rk3229 evb board, and turn the GMAC on.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-27 21:38:50 +02:00
Xing Zheng 5d3d7c72b9 ARM: dts: rockchip: add GMAC nodes for RK322x SoCs
This patch add the GMAC dt nodes for rk322x SoCs.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-27 21:28:25 +02:00
Xing Zheng ccada24892 ARM: dts: rockchip: add i2s nodes for RK322x SoCs
This patch add the i2s dt nodes for rk322x SoCs.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-27 21:19:52 +02:00
Xing Zheng 8372d93df7 ARM: dts: rockchip: rename rk3228.dtsi to rk322x.dtsi
We have the brother chipset that RK3228 and RK3229, they share most
of dts configuration, but there are a number of different features.
In order to develop the future when they are easy to distinguish,
we need them to be independent.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-06-27 20:22:46 +02:00
Thor Thayer a67adb32d9 ARM: dts: Add Arria10 Ethernet EDAC devicetree entry
Add the device tree entries needed to support the Altera Ethernet FIFO
buffer EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1466603939-7526-9-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2016-06-27 19:46:19 +02:00
Florian Fainelli 36e55669eb ARM: dts: BCM5301x: Add RNG Device Tree node
Add the DT node for the random number generator peripheral.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-27 10:15:14 -07:00
Stephan Linz e580822775 arm: use the new LED disk activity trigger
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'

Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-27 08:58:40 +02:00
Olof Johansson ed749a53b2 mvebu fixes for 4.7 (part 1)
Various I/O memory fix for Cortex A9 based SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAldo+JYACgkQCwYYjhRyO9XI5QCglOxAOJSamD5IgIpMklk/5ZpG
 /MEAn0j80ClwN+YB+/eii/iUMwHwMDQe
 =iyoH
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-fixes-4.7-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 4.7 (part 1)

Various I/O memory fix for Cortex A9 based SoCs

* tag 'mvebu-fixes-4.7-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
  ARM: mvebu: map PCI I/O regions strongly ordered
  ARM: mvebu: fix HW I/O coherency related deadlocks

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-25 21:19:37 -07:00
Sergei Shtylyov 3e1839e91d ARM: dts: r8a7792: add JPU support
Describe JPEG Processing Unit (JPU) in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-24 11:04:36 +09:00
Sergei Shtylyov eebc8e2c5b ARM: dts: r8a7792: add JPU clocks
Add JPU clock and its parent, M2 clock to the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-24 11:04:35 +09:00
Sergei Shtylyov adc47ecf5a ARM: dts: silk: add DU pins
Add the (previously omitted) DU pin data to the SILK board's device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-24 11:04:35 +09:00
Masahiro Yamada c6bbfbb729 ARM: 8576/1: avoid duplicating "Kernel: arch/arm/boot/*Image is ready"
Commit 3939f33450 ("ARM: 8418/1: add boot image dependencies to
not generate invalid images") fixed bad image generation for the
parallel building, but as its side effect, Kbuild now descends into
arch/arm/boot/ again and again, duplicating the log messages.
It looks clumsy, so let's display the same message only once.

This commit moves the log rules from arch/arm/boot/Makefile to
arch/arm/Makefile.  I did not delete them completely because *Image
are the final targets that users are interested in.

Without this commit, the log of incremental build is like follows:

$ make ARCH=arm UIMAGE_LOADADDR=0x80208000 uImage
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Image arch/arm/boot/uImage is ready

With this commit, it will look like follows:

$ make ARCH=arm UIMAGE_LOADADDR=0x80208000 uImage
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Kernel: arch/arm/boot/uImage is ready

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-06-22 19:55:12 +01:00
Hans de Goede b3b630b26a ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists
Now that we've a clock node describing pll3 we must add it to the
simplefb nodes clocks lists to avoid it getting turned off when
simplefb is used.

This fixes the screen going black when using simplefb.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-22 11:51:39 +02:00
Lokesh Vutla 52c7c91319 ARM: dts: AM43xx: Add node for RNG
Adding DT node for hardware random number generator.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-22 00:44:16 -07:00
Lokesh Vutla 8ed607a749 ARM: dts: AM43xx: clk: Add RNG clk node
Add clk node for RNG module.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-22 00:44:07 -07:00
Lokesh Vutla 610e9c4aec ARM: dts: DRA7: Add DT node for RNG IP
Adding dt node for hardware random number generator IP.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-22 00:43:58 -07:00
Lokesh Vutla da34609df5 ARM: dts: DRA7: Add support for SHA IP
DRA7 SoC has the same SHA IP as OMAP5. Add DT entry for the same.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: changed SHA to use EDMA instead of SDMA]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-22 00:43:47 -07:00
Joel Fernandes e7fd15c1d0 ARM: dts: DRA7: Add DT nodes for AES IP
DRA7 SoC has the same AES IP as OMAP4. Add DT entries for both AES cores.

Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: squashed in the change to use EDMA, squashed in
                  support for two AES cores]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-22 00:43:25 -07:00
Joel Fernandes bac9d0b847 ARM: dts: DRA7: Add DT node for DES IP
DRA7xx SoCs have a DES3DES IP. Add DT data for the same.

Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-22 00:43:12 -07:00
Enric Balletbo i Serra f03a881a8a ARM: dts: am335x-bone-common: use stdout-path in Beaglebone boards.
This commit adds the stdout-path propety in /chosen for all Beaglebone
boards.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-21 04:53:11 -07:00
Greg Kroah-Hartman bc71c2df45 Merge 4.7-rc4 into usb-next
We need the 4.7-rc4 fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20 07:40:51 -07:00
Olof Johansson be6e3f3160 This pull request contains Device Tree changes for Broadcom ARM-based SoCs:
- Chris provides documentation and DTS fixes for the bcm11351 CPU enable-method in preparation
   for adding support for the BCM23550 SoC and its corresponding documentation, SoC dtsi
   and the Sparrow board DTS file
 
 - Jon adds MSI support to the PCI nodes, updates the secondary cores boot address for the B0
   production revision of the Northstar Plus SoC, adds a DTS for the BCM958625HR board, another
   one for the BCM958525XMC board, and finally adds the PL330 DMA controller to the NSP DTS
 
 - Rafal enables the SPI NOR flash on dual flash systems (NAND + SPI) on the BCM5301x SoCs
   and devices
 
 - Florian adds support for the BCM5301x built-in Ethernet switch by adding nodes for the
   Gigabit MAC controllers and the Switch Register Access block, and finally updates the
   SmartRG SR-400AC board with its switch port layout
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY1hBAAoJEIfQlpxEBwcEY6gQAKRAF/CK920lh6BeW0JKgzix
 L1J2TBirqYv/yRB0hiBY9myh61yV31SgCksgJbJrOREWTJMxx8lLve3jnCqVdzd+
 ODfgb2QLGgQJZfLFaK2JHxY8NkgrrABkNEb7kIv+MCes3FrtBJHtH02y661w5goB
 t5zJyvz9FeIQJULFv9jNyVpa+A7Hy8jg1Wvin62mF7uXewFEr9kcddbeXsmRw/EB
 j491pFNDw4lkYecyMWyb5c4QqJEtVWIFWxCFRDf4OvG3JhzvMWfyNfhSm9t4nPUU
 pxadZsnVrPPYBQq5QC0zC5bSBCZHRgTt+JsXAl557rAGePuPSKTennri3ubxwQbi
 9w8PevstBXKq0J6Ynl0lrqLAUrLbnt57bq49hxMM7ur0CXGL5CdzRKRkiUme4ZsB
 G5shPXsYlfpCwjAvthshb1npreUxTyxQkO6D6y3Zojb/tlNrwBvV3QmqC8Lpe4wm
 7J/hznwOUyhgm+IR92tSL+nyFd8gqOBAHOipUNDTQGix2BuYveAngh0I7lysVvQt
 E47UAc6+y6IHt7iNbubZVfJ6HQnu5EZPoPwoev0/2Xbr0Bd7wBYshAYnVynkj0lf
 9v47CYKNvaYDzXSacpxodA+iZMVgkGrRzoyMskaqzPgcBCnMiQeVLuivrUerx1in
 yYxPjRCv+QMd1qbv3K4+
 =0GWx
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.8/devicetree' of http://github.com/Broadcom/stblinux into next/dt

This pull request contains Device Tree changes for Broadcom ARM-based SoCs:

- Chris provides documentation and DTS fixes for the bcm11351 CPU enable-method in preparation
  for adding support for the BCM23550 SoC and its corresponding documentation, SoC dtsi
  and the Sparrow board DTS file

- Jon adds MSI support to the PCI nodes, updates the secondary cores boot address for the B0
  production revision of the Northstar Plus SoC, adds a DTS for the BCM958625HR board, another
  one for the BCM958525XMC board, and finally adds the PL330 DMA controller to the NSP DTS

- Rafal enables the SPI NOR flash on dual flash systems (NAND + SPI) on the BCM5301x SoCs
  and devices

- Florian adds support for the BCM5301x built-in Ethernet switch by adding nodes for the
  Gigabit MAC controllers and the Switch Register Access block, and finally updates the
  SmartRG SR-400AC board with its switch port layout

* tag 'arm-soc/for-4.8/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC
  ARM: dts: BCM5301X: Add SRAB interrupts
  ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
  ARM: dts: NSP: Add PL330 support
  ARM: dts: NSP: Add XMC board support
  ARM: dts: bcm23550: Add device tree files
  Documentation: devicetree: Document BCM23550 bindings
  ARM: BCM5301X: Enable SPI-NOR on dual flash devices
  ARM: dts: NSP: Add new DT file for bcm958625hr
  ARM: dts: NSP: modify second CPU address
  ARM: dts: NSP: Add MSI support on PCI
  ARM: BCM: modify Broadcom CPU enable method
  ARM: dts: fix use of bcm11351 enable method
  Documentation: Binding docs for bcm11351 enable method

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:45:47 -07:00
Olof Johansson 00d624dcb9 Amlogic DT changes for v4.8
- add reset driver for meson8b
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXYGsvAAoJEFk3GJrT+8ZlxFgP/RmOeXE+vIYrxydjmYObLXEk
 Yh6lJSuFuZZupuBYeN2z5kophPv0ADJuXDEHKK/qQ95bKjueI5CaAToSyIW2UnBG
 ZmZ4DDz3pS79/F0EV4aK2KOt1ef9NhvfCjOk2raJwPwdXuh+A+p1wrTA8xTYFzHp
 Iac9fE3d1pnCr4tKo3K/u6dFYHUA5SwRhkMtu7SG9tfd8RZ03fJrDAA+PWTVk8+m
 5FAIVu0h5ijHvQMyxXNJxEjwJJwvrqDEnsAcxgYx7CIK/MJdVfFa3JyW3yaFFgos
 VeGE3DDbGqAf+q1Hz6vgFJ2GjbBDcq71z5CIO5nawa1FhoTwM9QEnLUKOI/CX/8O
 lyDBDUSfAhumbiOFyWsQhnBfU+msM6GduvMvYzHq7t7TdOQptDKc+0mznoJgXuQD
 7RTCn74E/o47f8Lmrl3WXLt7Xk4JXrrx2qkXYJ9SmofdyWq4qaEzHbDbhA7GWNDh
 ogMZkHPuMarO32qZ9xL05PqpMzyFVVJzFMmQ21ynE43svw0751+ReOLbnO9zHF85
 kZHuzch8tvt7h2AJzV/OrPMY+dwSwZ5+GuAeDTDNrruxqFzfXIUNRglbiZ4sVMIL
 m81xAzB8dDThRzkG0wKIEyXFMOPdxpkscd9ssmy4slrMpuAh/frj0QPvlXUXBarw
 FLG92wS0nA2OSXWxkr6P
 =iBxd
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic DT changes for v4.8
- add reset driver for meson8b

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: amlogic: Enable Reset Controller on Meson8b platforms

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-19 22:29:47 -07:00
Olof Johansson 58935f24a9 Fixes for omaps for v4.7-rc cycle:
- Fix dra7 for hardware issues limiting L4Per and L3init power domains
   to on state. Without this the devices may not work correctly after
   some time of use because of asymmetric aging. And related to this,
   let's also remove the unusable states.
 
 - Always select omap interconnect for am43x as otherwise the am43x
   only configurations will not boot properly. This can happen easily
   for any product kernels that leave out other SoCs to save memory.
 
 - Fix DSS PLL2 addresses that have gone unused for now
 
 - Select erratum 430973 for omap3, this is now safe to do and can
   save quite a bit of debugging time for people who may have left
   it out.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXXm6cAAoJEBvUPslcq6VzgiAP/3j+Zvaks93gLf0Hc1sQ5ow+
 UxQ3Gb3/gVGEh1OSb/c4MI800UBK1B0f6CqLK7zDFAuDHyUwmqJ27nrARfazoMPD
 DxRYZoEs897peB0/SWwDtHR+yje5UmIB0P31kRJ+t5nYwXBKvmvkWPFrOISxgI1Z
 yLc62tFoVy37IYfeH6pRNwMyJz9scl4qXjiBCHTmBQvgo4I3IPpvhFAWN5YMBZlz
 VwXDtmR9B/WlcRYel+RplYQrQrXVvaaT01wTPfejKHI9dyNQmbJQDWFMuuvdQKjE
 O7yjcgR6DdWjdDwCmIHLuc2FyrwW+wt1AY/5UXKGroxfW6Ct3JKuhUPPxsHfRMKX
 2NnQtgUcUxiIAGrsEZFadUAIEedd+DBVK+aztn1reaaHR1R/pBnMcEnch9WRuAOQ
 srOaaL2Had/NG+QRE0psgck9ayzpDHw+LMd18BckCN+1mIiFBnXYZrCVUPrutgPP
 5RbDWIeSVeAwbdaxPRqkXOcMGZ1MDRGoS+UBlTms+gWuSLjFj6sye0+Dao+68Ehz
 im/xhh0YCHgN0TvuvTla5BgLgOunlCNtXMNWyg801lDIvzOj/ngEQlasng9uzuri
 mfGf5w8ctub0Ileq4eU+rYb+bRDiDagjmiVBjbRmLWtgOUcsrNr+FX9sp5NDELmS
 oEa/VB8jNmI3aSv6OrNi
 =mQyc
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.7-rc cycle:

- Fix dra7 for hardware issues limiting L4Per and L3init power domains
  to on state. Without this the devices may not work correctly after
  some time of use because of asymmetric aging. And related to this,
  let's also remove the unusable states.

- Always select omap interconnect for am43x as otherwise the am43x
  only configurations will not boot properly. This can happen easily
  for any product kernels that leave out other SoCs to save memory.

- Fix DSS PLL2 addresses that have gone unused for now

- Select erratum 430973 for omap3, this is now safe to do and can
  save quite a bit of debugging time for people who may have left
  it out.

* tag 'omap-for-v4.7/fixes-powedomain' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret
  ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret
  ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON
  ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX
  ARM: dts: DRA74x: fix DSS PLL2 addresses
  ARM: OMAP2: Enable Errata 430973 for OMAP3
  + Linux 4.7-rc2

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:57:48 -07:00
Olof Johansson 9503427e91 Fixes for omaps for v4.7-rc cycle:
- Two boot warning fixes from the RCU tree that should have gotten
   merged several weeks ago already but did not because of issues
   with who merges them. Paul has now split the RCU warning fixes into
   sets for various maintainers.
 
 - Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes
 
 - Fix PM for omap3 boards using timer12 and gptimer, like the
   original beagleboard
 
 - Fix hangs on am437x-sk-evm by lowering the I2C bus speed
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXY8wuAAoJEBvUPslcq6VzGBQQAJ6OIH0Gws19Wyi8IqnjMLJN
 npu+JXU0xP5bBZ+HbCVjyN8k32drhXdwDMQ+u1DvBYwUuyLIIRZPZF4aHb8fDfOC
 v1VqUzQRzj1FCh9MlkdqTedA180WCo5PCGlFOon0BmaZlv9WevEaTOYrEgyZPrmk
 quBnaE+baZfGxWBbDSN+OrGYobQRs7Eu8bel0gh628CDiajrbwlIyAcNdEn5C/Uu
 GHiEuIQcxb4b62mwAwh/t7el9ureirsS1b6mFB41puPmF/lYawI6YaCWIL48lbMd
 XsgKGnFDU6dgSO5QRx5PhP/7YP9FetS0U+g7iFhgjmArNCraNQYBY0ltMweOG0qe
 M8BPxDuCnhm1Q+PcjBORteN/PF47kcnBMpiJVVTmq5JRlXUqXecKpoScCt9HfPgy
 EJq+esLQNIuRw9cEwVPQBj80GyxFUVqL/Rzo7xjEwTDPYRQERGCB7V68iV25on3w
 07dOVl/lSwe902ik580wnlGUq+J09wk+9hIKV2XwQAV/8mKaWMc3pA8rE/efLJoC
 buAsccxVcEsR3+uLSsU/P+fFm8nfBRmiOO9yIR4gez0BhbiDMc1zpwwhLkI+vTT4
 D3PnuUdVeBvoGTNnpwqSURxajhaK0DSKTwhWnWGubYfXd3B48sW76rvKLO1FThgL
 qyaed06QFeWj8gV+VZLb
 =P0Vi
 -----END PGP SIGNATURE-----

Merge tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.7-rc cycle:

- Two boot warning fixes from the RCU tree that should have gotten
  merged several weeks ago already but did not because of issues
  with who merges them. Paul has now split the RCU warning fixes into
  sets for various maintainers.

- Fix ams-delta FIQ regression caused by omap1 sparse IRQ changes

- Fix PM for omap3 boards using timer12 and gptimer, like the
  original beagleboard

- Fix hangs on am437x-sk-evm by lowering the I2C bus speed

* tag 'fixes-rcu-fiq-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
  ARM: OMAP2+: timer: add probe for clocksources
  ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ
  arm: Use _rcuidle for smp_cross_call() tracepoints
  arm: Use _rcuidle tracepoint to allow use from idle

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:21:52 -07:00
Lee Jones 0e289e534a ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes
This patch fixes a non-booting issue in Mainline.

When booting with a compressed kernel, we need to be careful how we
populate memory close to DDR start.  AUTO_ZRELADDR is enabled by default
in multi-arch enabled configurations, which place some restrictions on
where the kernel is placed and where it will be uncompressed to on boot.

AUTO_ZRELADDR takes the decompressor code's start address and masks out
the bottom 28 bits to obtain an address to uncompress the kernel to
(thus a load address of 0x42000000 means that the kernel will be
uncompressed to 0x40000000 i.e. DDR START on this platform).

Even changing the load address to after the co-processor's shared memory
won't render a booting platform, since the AUTO_ZRELADDR algorithm still
ensures the kernel is uncompressed into memory shared with the first
co-processor (0x40000000).

Another option would be to move loading to 0x4A000000, since this will
mean the decompressor will decompress the kernel to 0x48000000. However,
this would mean a large chunk (0x44000000 => 0x48000000 (64MB)) of
memory would essentially be wasted for no good reason.

Until we can work with ST to find a suitable memory location to
relocate co-processor shared memory, let's disable the shared memory
nodes.  This will ensure a working platform in the mean time.

NB: The more observant of you will notice that we're leaving the DMU
shared memory node enabled; this is because a) it is the only one in
active use at the time of this writing and b) it is not affected by
the current default behaviour which is causing issues.

Fixes: fe135c6 (ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-18 22:21:02 -07:00
Ivan Khoronzhuk 6774b68b24 Documentation: DT: cpsw: remove rx_descs property
There is no reason to hold s/w dependent parameter in device tree.
Even more, there is no reason in this parameter because davinici_cpdma
driver splits pool of descriptors equally between tx and rx channels
anyway.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17 21:27:57 -07:00
Dave Gerlach d279f7a7e9 ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218
Based on the latest timing specifications for the TPS65218 from the data
sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206
from November 2014, we must change the i2c bus speed to better fit within
the minimum high SCL time required for proper i2c transfer.

When running at 400khz, measurements show that SCL spends
0.8125 uS/1.666 uS high/low which violates the requirement for minimum
high period of SCL provided in datasheet Table 7.6 which is 1 uS.
Switching to 100khz gives us 5 uS/5 uS high/low which both fall above
the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low.

Without this patch occasionally a voltage set operation from the kernel
will appear to have worked but the actual voltage reflected on the PMIC
will not have updated, causing problems especially with cpufreq that may
update to a higher OPP without actually raising the voltage on DCDC2,
leading to a hang.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Aparna Balasubramanian <aparnab@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-17 02:59:04 -07:00
Vincent Palatin d5bfbeb809 ARM: dts: rockchip: add interrupt for Wake-on-Lan on RK3288
In order to use Wake-on-Lan on RK3288 integrated MAC, we need to wake-up
the CPU on the PMT interrupt when the MAC and the PHY are in low power mode.
Adding the interrupt declaration.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16 14:14:58 -07:00
Yendapally Reddy Dhananjaya Reddy 8dbcad020f ARM: dts: nsp: Add sata device tree entry
Add sata support to the Northstar Plus SoC device tree.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-16 16:24:55 -04:00
Thomas Petazzoni 929e604efa ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
When the support for the Marvell crypto engine was added in the Device
Tree of the various Armada 385 Device Tree files in commit
d716f2e837 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x
boards"), a typo was made in the MBus window attributes for the Armada
385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit
fixes this typo, which makes the CESA engines operational on Armada 385
Linksys boards.

Reported-by: Terry Stockert <stockert@inkblotadmirer.me>
Cc: Terry Stockert <stockert@inkblotadmirer.me>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org>
Fixes: d716f2e837 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-06-16 17:01:28 +02:00
Boris Brezillon 5fc39d3472 ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
The sun4i-timer driver registers its sched_clock only if the machine is
compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or
"allwinner,sun4i-a10".
Add the missing "allwinner,sun5i-a13" string to the machine compatible.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: 465a225fb2 ("ARM: sun5i: Add C.H.I.P DTS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-06-16 09:56:36 +02:00
Diego Dorta 6b75a66b6e ARM: dts: imx6ul-pico-hobbit: Fix Ethernet PHY reset GPIO
According to the imx6ul-pico-hobbit schematics the Ethernet PHY reset GPIO
is GPIO1_28, so fix it accordingly.

Also adjust the reset duration to 1ms, because the KSZ8081 datasheet
requires 500μs.

Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 10:05:17 +08:00
Soeren Moch 771db6c8ba ARM: dts: imx6q-tbs2910: fix pcie reset polarity
According to Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt the
polarity of "reset-gpio" is assumed to be active-low unless a separate
property "reset-gpio-active-high" is available. So replace the inconsistent
polarity description to make the correct active-low reset behavior more
obvious.

Signed-off-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:58:17 +08:00
Fabio Estevam 8c4a18e232 ARM: dts: imx6sx-sdb: Use WDOG_B pin reset
imx6sx-sdb has WDOG1_B pin connected to the PMIC.

Pass the 'fsl,ext-reset-output' property so that the watchdog
can trigger a system POR reset via the PMIC.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:55:34 +08:00
Fabio Estevam 50e0299809 ARM: dts: imx6ul-evk: Use WDOG_B pin reset
imx6ul-evk has WDOG1_B pin connected to the PMIC.

Pass the 'fsl,ext-reset-output' property so that the watchdog
can trigger a system POR reset via the PMIC.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:55:31 +08:00
Fabio Estevam 51fd03233d ARM: dts: imx7d-sdb: Use WDOG_B pin reset
imx7d-sdb has WDOG1_B pin connected to the PMIC.

Pass the 'fsl,ext-reset-output' property so that the watchdog
can trigger a system POR reset via the PMIC.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:55:25 +08:00
Fabio Estevam 49607ff7a6 ARM: dts: imx6qdl-sabresd: Use WDOG_B pin reset
imx6qdl-sabresd has WDOG2_B pin connected to the PMIC.

Pass the 'fsl,ext-reset-output' property so that the watchdog
can trigger a system POR reset via the PMIC.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:54:47 +08:00
Christopher Spinrath 3cfb411a64 ARM: dts: utilite-pro: add mmc card slot support
The Utilite Pro has a mmc card slot connected to the usdhc3
controller. There is no card detection until hardware revision 1.3.

Add support for it and signal the controller with the broken-cd
property that polling has to be used to detect a card.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:39:48 +08:00
Valentin Raevsky 5bca20f7fe ARM: dts: imx6q-cm-fx6: fix the operation points
The current ldo settings of the cm-fx6 do not allow 1.2GHz cpu
frequency. At this frequency the module behaves unstable.

But the imx6q fuse indicates that 1.2GHz operation is possible.
Hence, remove the 1.2GHz operation point in the device tree.

Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
[christopher.spinrath@rwth-aachen.de: enhance commit message, adjust
 remaining operation points to match the ones in imx6q.dtsi and add
 a comment in the device tree]
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:32:37 +08:00
Peter Chen 74332d7576 ARM: dts: imx6qdl.dtsi: add "arm,shared-override" for pl310
The imx6 SMP system has the same DMA memory coherency issue [1] with
pl310 L2 controller. With this shared override bit set, the customer
reports the DMA coherency issue is gone. Besides, I have tested
the performance using USB ethernet with/without this bit, it shows
no difference.

[1] http://patchwork.ozlabs.org/patch/469362/

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-16 09:01:38 +08:00
Sergei Shtylyov f80b6dfd5e ARM: dts: blanche: add Ethernet support
R8A7792  SoC  doesn't have the EtherMAC core, so SMSC  LAN89218  Ethernet
chip was used instead on the Blanche board; this chip  is compatible with
SMSC LAN9115  for  which there's a (device tree aware) driver. Describe
the  chip in  the  Blanche device tree;  enable DHCP and NFS root in the
kernel command line for the kernel booting.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 09:25:30 +09:00
Sergei Shtylyov 4018fba454 ARM: dts: blanche: initial device tree
Add the initial device  tree for the R8A7792 SoC based Blanche board.
The board has 2 debug serial ports: SCIF0 and SCIF3; include support for
them,  so that  the serial console  can  work.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 09:25:29 +09:00
Sergei Shtylyov 56efdbe56b ARM: dts: r8a7792: add IRQC support
Describe the IRQC interrupt controller in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 09:25:21 +09:00
Sergei Shtylyov e66796b9bb ARM: dts: r8a7792: add [H]SCIF support
Describe [H]SCIFs in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 09:25:20 +09:00
Sergei Shtylyov fdf8ec0a17 ARM: dts: r8a7792: add SYS-DMAC support
Describe SYS-DMAC0/1 in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 09:25:20 +09:00
Sergei Shtylyov 7c4163aae3 ARM: dts: r8a7792: initial SoC device tree
The initial R8A7792 SoC device tree including CPU cores, GIC, timer, SYSC,
and the required  clock descriptions.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16 09:25:20 +09:00
Uwe Kleine-König 67c29a81c2 ARM: imx25-pinfunc: remove SION from all modes
With the SION bit set a pin can be read as GPIO even though it's not muxed
as GPIO. This is useful at times. The downside however is that the signal
is not only routed to the GPIO IP but also all other IPs that can make use
of the pin. This resulted in more than one issue for me in the past. Things
like spi transfers that result in usb reenumeration or setting a GPIO to a
value that triggers an RTS irq for an UART.

This convinces me that the SION bit does more harm than good and so all
SION bits are removed that are not known to be needed.

Note that this has no influence on GPIOs under Linux as the gpio-mxc
driver just reports the level the pin is driven to for outputs and not
the level as seen on the pin.

If this commit introduces a regression for you, please report which SION
bit is essential for your setup.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-15 21:42:45 +08:00
Uwe Kleine-König da4fa6fa80 ARM: imx25-pinfunc: document SION being important for MX25_PAD_SD1_CMD__SD1_CMD
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-15 21:42:29 +08:00
Neil Armstrong cad059c6e6 ARM: dts: amlogic: Enable Reset Controller on Meson8b platforms
Update DTSI file to add the reset controller node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-06-14 13:36:56 -07:00
Masahiro Yamada 2a4a2aadba ARM: dts: uniphier: renumber serial aliases for Gentil/Vodka boards
On these two boards, the serial0 is used for inter-chip connection,
so cannot be used for login console.  The serial2 is used instead
for them, but it is tedious to use because upper level deployment
projects must switch login console per board.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-14 10:38:58 -07:00
Masahiro Yamada ebe161d3e4 ARM: dts: uniphier: add SoC-Glue node to UniPhier 32bit SoCs
This node consists of various system-level configuration registers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-14 10:38:55 -07:00
Masahiro Yamada fdaf72e52f ARM: dts: uniphier: add System Bus pinmux node
This pin-muxing is needed to get access to the UniPhier System Bus.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-14 10:36:27 -07:00
Olof Johansson 27c1e36223 DT Changes for 4.8:
- New board: Olimex SAM9-L9260
  - Fix crystal definitions for Denx ma5d4
  - Remove leftover clock definitions
  - Add stdout-path for usb_a9260/a9g20
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJXXUN5AAoJENiigzvaE+LCDpkP/0w7RA9ka7ABAYO6espZ4bO8
 lUDMJeOXGA04dLD0H4QwVxVd4OeculwhvdQ9EwInF0wscmQXyqIFjlefebOGjQUp
 FCwys1KXyAVLNz02Qc1uy4Lnq25N2XzGn/nyAJZYm9GesjI0mJ6zHmk2NsIgRKZP
 yEBTNnGWtnOHDO6GVi/QHGyfA/LHbJaTddwsUBoFrlRET6XW/ppLOKmxMKVEoZR8
 XyfRcbEJ6GuUMQ4rv3NzUoUoFCl0AFaROcrtJfCf7MBhjlXFho9eXQh33rx8J7po
 4FyKKqi7yi3a27F0Dwt3Y/M13FBV178MI+J0IFFiqx6aghFtSEYg+Edz7/rtR+dQ
 dhAlU1DLB8rjlItK9EvFUfUpED3JGfc2kVHHsrzjx+oj/nyJ8pO7B5ew7Il/8tKM
 7e1ujKbJo2hvmxNJ+ULhKc+Ma8z0ofUbvrxGo/vYQn5/5+ZCPzpYmJBfNCh5JqJC
 sNJL4L83CfwHYCiQgT7bI+X1GyC7AGbpggLx7pGi4ji+wsCqZ275zVozrG4dm2u5
 jWlIYm4QGZ0B+qo4qwOqinldfNK06KUqtQMazYY3mmRw2USvc2uNq5ka9OLnUNI8
 PKCjoCaYql0iYJSAKpHdEF3+4ST6WcduQrxW4btGximGRQFx60nlnGLqe9jGNpCz
 IrxscsTkqsUd89m4/jYk
 =9TFL
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT Changes for 4.8:
 - New board: Olimex SAM9-L9260
 - Fix crystal definitions for Denx ma5d4
 - Remove leftover clock definitions
 - Add stdout-path for usb_a9260/a9g20

* tag 'at91-ab-4.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: calao: remove leftovers clock definition
  ARM: dts: at91: pm9g45: remove leftovers clock definition
  ARM: dts: at91: mpa1600: remove leftovers clock definition
  ARM: dts: at91: ge863-pro3: remove leftovers clock definition
  ARM: dts: at91: at91-foxg20: remove leftovers clock definition
  ARM: dts: at91: at91-cosino: remove leftovers clock definition
  ARM: dts: at91: at91-ariag25: remove leftovers clock definition
  ARM: dts: at91: animeo_ip: remove leftovers clock definition
  ARM: dts: at91: ma5d4: properly define crystals frequencies
  ARM: dts: at91: usb_a9g20: use stdout-path
  ARM: dts: at91: Add DT support for Olimex SAM9-L9260 board.
  ARM: dts: at91: at91sam9260: Remove leading zeros in OHCI node.

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-14 10:26:25 -07:00
Geert Uytterhoeven 970a62e07e ARM: dts: kzm9g: Name serial port pfc subnode after device name
Name the Pin Function Controller subnode for SCIFA4 after its device
name, instead of after the serial port alias.

This avoids conflicts when adding support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:11:38 +09:00
Geert Uytterhoeven a35cc9d262 ARM: dts: silk: Name spi pfc subnode after device name
Name the Pin Function Controller subnode for QSPI after its device name,
instead of after the spi interface alias.

This avoids conflicts when enabling support for more spi interfaces
later, either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:11:26 +09:00
Geert Uytterhoeven 092599d697 ARM: dts: silk: Name serial port pfc subnode after device name
Name the Pin Function Controller subnode for SCIF2 after its device
name, instead of using some arbitrary name that looks like a serial port
alias, but differs from the actual alias.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:11:13 +09:00
Geert Uytterhoeven fc10f3c93b ARM: dts: alt: Name spi pfc subnode after device name
Name the Pin Function Controller subnode for QSPI after its device name,
instead of after the spi interface alias.

This avoids conflicts when enabling support for more spi interfaces later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:10:58 +09:00
Geert Uytterhoeven d88f5bc4a9 ARM: dts: alt: Name serial port pfc subnode after device name
Name the Pin Function Controller subnode for SCIF2 after its device
name, instead of using some arbitrary name that looks like a serial port
alias, but differs from the actual alias.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:10:47 +09:00
Geert Uytterhoeven 740f5c805f ARM: dts: gose: Name spi pfc subnode after device name
Name the Pin Function Controller subnode for QSPI after its device name,
instead of after the spi interface alias.

This avoids conflicts when enabling support for more spi interfaces later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:09:13 +09:00
Geert Uytterhoeven 167d34af3d ARM: dts: gose: Name serial port pfc subnodes after device names
Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:08:28 +09:00
Geert Uytterhoeven 2d3e17013b ARM: dts: porter: Name spi pfc subnode after device name
Name the Pin Function Controller subnode for QSPI after its device name,
instead of after the spi interface alias.

This avoids conflicts when enabling support for more spi interfaces
later, either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:08:17 +09:00
Geert Uytterhoeven a1cd3c55d3 ARM: dts: porter: Name serial port pfc subnode after device name
Name the Pin Function Controller subnode for SCIF0 after its device
name, instead of after the serial port alias.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:08:01 +09:00
Geert Uytterhoeven a4d98bed5e ARM: dts: koelsch: Name spi pfc subnodes after device names
Name the Pin Function Controller subnodes for QSPI and MSIOF0 after
their device names, instead of after the spi interface aliases.

This avoids conflicts when enabling support for more spi interfaces
later, either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:07:47 +09:00
Geert Uytterhoeven b71b8346e2 ARM: dts: koelsch: Name serial port pfc subnodes after device names
Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:07:31 +09:00
Geert Uytterhoeven da84fd9348 ARM: dts: lager: Name vin pfc subnode after device name
Name the Pin Function Controller subnode for VIN1 after its device name,
instead of using the generic and indexless "vin".

This avoids conflicts when enabling support for more video inputs later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:07:17 +09:00
Geert Uytterhoeven 85c5e4c429 ARM: dts: lager: Name spi pfc subnodes after device names
Name the Pin Function Controller subnodes for QSPI and MSIOF1 after
their device names, instead of after the spi interface aliases.

This avoids conflicts when enabling support for more spi interfaces
later, either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:06:58 +09:00
Geert Uytterhoeven ca34829853 ARM: dts: lager: Name serial port pfc subnodes after device names
Name the Pin Function Controller subnodes for SCIF0 and SCIFA1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:06:37 +09:00
Geert Uytterhoeven 46344361f5 ARM: dts: marzen: Name serial port pfc subnodes after device names
Name the Pin Function Controller subnodes for SCIF2 and SCIF4 after
their device names, instead of using some arbitrary names that look like
serial port aliases, but differ from the actual aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:06:14 +09:00
Geert Uytterhoeven c32149c7fd ARM: dts: bockw: Name serial port pfc subnode after device name
Name the Pin Function Controller subnode for SCIF0 after its device
name, instead of after the serial port alias.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:05:55 +09:00
Geert Uytterhoeven 94667b193c ARM: dts: armadillo800eva: Name serial port pfc subnode after device name
Name the Pin Function Controller subnode for SCIFA1 after its device
name, instead of after the serial port alias.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:05:41 +09:00
Geert Uytterhoeven 8b68d53ec2 ARM: dts: ape6evm: Name mmc pfc subnode after device name
Name the Pin Function Controller subnode for MMC0 after its device name,
instead of using the generic and indexless "mmc".

This avoids conflicts when enabling support for more MMC interfaces
later, either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:05:15 +09:00
Geert Uytterhoeven 94f58eb2a8 ARM: dts: ape6evm: Name serial port pfc subnode after device name
Name the Pin Function Controller subnode for SCIFA0 after its device
name, instead of after the serial port alias.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-14 09:04:13 +09:00
Olof Johansson a0110642e6 Fixes for Exynos-based Snow and Peach Pit boards for regressions introduced in
4.7-rc1 because OF graph logic expects specific names of child nodes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXXssHAAoJEME3ZuaGi4PXGNwQAIuZyLfPaJpqOlhIACwQsaXj
 /X6/sg1dy92QooW1r5VHeYYVBjcY3xfOqpFuJhQbxXbsDuhgrKFLIZh0hyUd1uoY
 hWJAlwmTjF85IxhbNtPMoysxDxRpKs/nuR/GiDI+5cR50YNZC8tCiyODurRGCLm2
 QQ7Y4DcmuWfLqTR8o65xCGv8AuVEhp4S+b4uLT3Cx5BSZd7cQVlHpcMyI4Ynkm1K
 nQ/yWF7SA8q6bQtb4ApofQszUZiC5R5V5xi1iCz9ukktEs1f7F+HkFaCTw9QtlbU
 Ej258jvnDxDAHwcAzFWxFHlk6zJV/SIFHH4lxvyPNVnRs6mRoCmBnyWrsKiHOCo3
 lCSaAwDluyBFRK+cfa0gZsBco69BBniRBkapqbQeu+GdnOli726XA/vBST+qpQ0C
 +2js6i6wpokR3YHqXhaf6HNqM1Q5ORYPQMxz76u2Okdnucha0/q7cBjJPekpIwE0
 TyoXUWP8tWWxdDoAVwyHp+0Ai34pof2pyMFFkV2PdIheVYlGYVust5uEhTWGp+ty
 4m0ukaMffq5Xp4xOlRraaVgSvZo7/BGxiBRFud8ve9sYEx6uu7a0R365kDsnScVW
 gpnUoDTuf0FsH/OAj6ZSraf2oqfOvrJ+TEybMdTD4M9MeZqcxtc8x6bWb2Ilwox3
 JFXyCQR4Y+GtpQFEwAfL
 =ro/B
 -----END PGP SIGNATURE-----

Merge tag 'samsung-fixes-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes

Fixes for Exynos-based Snow and Peach Pit boards for regressions introduced in
4.7-rc1 because OF graph logic expects specific names of child nodes.

* tag 'samsung-fixes-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board
  ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-13 15:53:29 -07:00
Olof Johansson ecb0693d3e SoCFPGA fix for v4.7
- Add missing PHY phandle for SoCFPGA VINING board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXWG76AAoJEBmUBAuBoyj08fYP/iX7f+nYApmrmsNq6r6aNi5F
 brbS2Ly3lopdEHFFDhl/7okxiETZzzw54tHaPdOtwpKkeVaCA2HW5+bxjW4i+/xx
 lbDC8c/Yvxg5HAbVL9fPNNXqCMWyTZr9mDoqMzFfI0zUUrP9j+bD9k7/MzQIuJoT
 n2WLDpY4yesGVNTJFbYffrnHUcJc2yHx0/wpPLx0JgZsl8OnnSG9+bnxrHuzM8O0
 lDrF/crxwcq0sVmFY2RVQCIF2AMUCAsxboOjaUeMix/16jkZVQnfEMhHv9GOdOCc
 JVAarPDZNb9yiaw/y3ZfrdE3Tp2+behH1S4vS1vL4pKuBbU9ja5hl1wstwQ4bV73
 Njq6tmokzV81ggqobu4cZYBw6sr2+eon83CGfOIq0tO4Y2QBGLoi/lBMeA9+6EJK
 rRg8GIU7QkGyTYAHX0caWKZW5uFjP+zIO9cydwDCfVtiHWNLBCBMYB2wm3vIpyqg
 oVSIUeUfMKmckz5biZzldz3UWmOj4MX2IrfKlNRvV0Pg/uRh6BctHgSrAvwmJcXK
 eIcFC0hAtD6K7ayWWiILjpZViXgDyrOBw71AQSpy4A3GZkYjuWK9Wxe0CGa4dFzj
 y3H5fN+7kaZ7eiXfK9eZpc9Km0af+nEuwaMVw6FTUd/NAzjPtJc/CK3IhUERgSJf
 2YNQNJlIdm9B0DZNbKQK
 =WaXk
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_fix_for_v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixes

SoCFPGA fix for v4.7
- Add missing PHY phandle for SoCFPGA VINING board

* tag 'socfpga_fix_for_v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: Add missing PHY phandle

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-13 15:48:51 -07:00
Olof Johansson 943bba786f SoCFPGA DTS updates for v4.8
- Update Arria10 ECC manager
 - Add ethernet alias for Arria10
 - Update serial alias for Arria10
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXWHESAAoJEBmUBAuBoyj0VV0QALgtV3avO4/bTuAOjkhvUy9Q
 KX4Hbene+bK2zkd82ChMfaFErPD8AYttdy6pLKUHp+F6AssTRH2RTyezwv/dlIBH
 +Q/qFvs6SRvc+0Jto11hVe/Dx5adV7aeBLjzWwLkNJ/BpqRCyM4hKw228i0JwuMl
 /PM3LdZw8V1956rbwcjLCNWV4HaDhOB0hTmfO+nZIGHaj6Qut27BYa4tGLWDKRPs
 QE7RwY3FBNMCXcpRGQBhjFzBGJrFEAT5/tkr3UA2vJnUhSKQa99QQon/L/REhPdY
 EWkrvLOTa86sof51jsm9bSM2TJvbJs+rQkHsp8qgWfgz2TI0S9kvFq72ttDJtII1
 HWxAJqAiJgP6X95RVU/aLPVZ4uyKg3MjPT4mYhIj9H1yex440kPHG9dOx99DKoxA
 1UGDh68J4c0UIL9Uvt+QLeTY2PfaunfDxjcsDVxKfw++sXE4OeazhJCJlceq8P+o
 z5r5hl2CzWeKLnrWP7oNQhfjuRce8G4NzBKAoL+11JVi1xwv8C1ggX2TqAhfY+kz
 WH45OmG2djzuY96sLb3tabatl7i6h3UALFCZTJ6D9XXB3zKbqgwSrq7IlVvkFkf9
 ivDNp8TQ1rczho/ue5GLgrqBN3l1El1KX4Kj3K9ZW3Fj60FzVvP+V5tsNBVq+nBb
 ntn4eP0ZTeozDIm/XvtK
 =WdVs
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_updates_v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v4.8
- Update Arria10 ECC manager
- Add ethernet alias for Arria10
- Update serial alias for Arria10

* tag 'socfpga_updates_v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: fix definitions of serial console
  ARM: dts: socfpga: add ethernet alias on Arria10
  ARM: dts: Move Arria10 SDRAM as child of ECC Manager
  ARM: dts: Arria10 ECC Manager IRQ controller changes

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-13 15:47:15 -07:00
Olof Johansson a264cc2e3c Ux500 devicetree patches:
- Move the ab8500 compatible string from the board to the
   chipset.
 - Define GPIO line names for the boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXV8y4AAoJEEEQszewGV1zXRUP/RitlC4vtzEXCfhTHdg3BQI1
 uNkHl96N3sgQaj/67ImT46E078JlIz9uNFhxj3jXxIk5BOaJoBBG6Giz8NzFpEl/
 Jh7YFzUW4L5v8O4vp5Fl1vEUvXoZn8MZClihcREihcjecm6FAD0CHujmu6dn2cpx
 sC7L1mbmS8IWvGeLxohfCoeAJFnSsNwJ2BUqgdnM/dxRFa33fr45XTGIVeV5XkI6
 JPYyM7jsGnbg9YqWX+RdLLMLD1DcriSpXjVbmHdfW6avqAjWT6USIe7gjcG6YUwR
 6Pqh0HLGVH6PNVRlkIlV1hVizPPb3At4ouMT9I09kmoAD1mpg1AsiadunA4F2EPa
 oDgajYRI4Teuj171jCjWyCnJIcluqhXK+QgYFs/ubT1BklKBxBwOHFgz0yIhpSEq
 VBMEjfyXko+wYpCfG+ZZEPyqOhBFQfhlQnS8TzL4nMI1oma7XnY7s/Ph0oSuZOlx
 L+FeQQ21SV2gBnO1oTTUk+D9D8V0Vwq9WvQWNt6kEt5E8AwGPX0N1FCGCFAyrwa+
 +YmCIBpMZj5TtYHhf6frRx+dEe5e3or3NdR0a43jXhPYxPkWhXVcBVKzMuPFfA0z
 5/3JDx37bFNmvSXW7ysw5dZeimvYtZfitw/9EOnxk9vS5ASiEOA2VtCTx9h3OZLs
 1ZDvxa/0XAOHTp5gbmv8
 =sOoX
 -----END PGP SIGNATURE-----

Merge tag 'ux500-dt-asoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Ux500 devicetree patches:
- Move the ab8500 compatible string from the board to the
  chipset.
- Define GPIO line names for the boards.

* tag 'ux500-dt-asoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: UX500: name the GPIO lines on HREFv60plus
  ARM: dts: Ux500: name the GPIO lines on Snowball
  ARM: dts: Ux500: move compatible string to chipset

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-13 15:45:18 -07:00
Olof Johansson 057b670df0 Renesas ARM Based SoC DT Updates for v4.8
* Fix W=1 dtc warnings
 * Reverence both DMA controllers on R-Car Gen 2 SoCs
 * Remove nonexistent thermal sensor clock from r8a7794 SoC
 * Correct unit names for cpu nodes on r8a7790 SoC
 * Add MMCIF0 to r8a7793 SoC
 * RTS/CTS hardware flow control for kzm9g and bockw boards
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXV2oXAAoJENfPZGlqN0++ZFkP/2UYbeKnX5x/VPxk9pCMaurA
 3sfGMJ8ocfmAZP45a5DJQPo4gXSVr/jdsl2p8ZCCEVe2TMaotqbHpcF3YW6k25YW
 ZO/7PQCIj9aePy7J70+wNLnEdUNkyNniBPdF2PBbkhulE2rG7xRLh6kQHDBn5WaQ
 4FPwtBQhrhkGql+2TuSOUrQuQv6KnyjDr7gBTdAtAvRV2qpLoCo1ezFfEi5VhNZx
 WMHJs+Yjv1/jVyUf4MwVKgx/3tvhihLWM0UnQpdUpvoWQzPyq1bRGVLuqJek+fsY
 XqSv06j/Kd7f7n0XANGc8I5xQYDe2TLL/hl2KsaQVmaowtzk++xEH8kwfPD78fEo
 ob5wb+pSxXNwunFx/yM7ZdTgm6cThWW3apiePHEX/Y9wfGHv8hFQk6tzdAxD4f9e
 QplHyrxz+hzCLThjkALkv27VL5oAXTwga7IWxXzQ7CT8clUYKKsu2VK5g91PpaTc
 2rBRXgzR6HA0Qc0CZY40BE9gHn40VWv0lkAJHvAqsyXn2HCpl5YNQ+2t9GcN7j/w
 8sow9y/bPGqktXHODpLEqpQKAT0H5cWuC3ZBTnVm/tENlXtPW3MQfKwc/rSQ7kIQ
 zpP+18LfdQKlIVLwqM6qCEBjIfwAJsSsbZt4ZZPNkEdc7wEkR87BmDoiyAu3bNFp
 CPw33BEValbz0WDtoGo+
 =MXJf
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Updates for v4.8

* Fix W=1 dtc warnings
* Reverence both DMA controllers on R-Car Gen 2 SoCs
* Remove nonexistent thermal sensor clock from r8a7794 SoC
* Correct unit names for cpu nodes on r8a7790 SoC
* Add MMCIF0 to r8a7793 SoC
* RTS/CTS hardware flow control for kzm9g and bockw boards

* tag 'renesas-dt-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (30 commits)
  ARM: dts: silk: Fix W=1 dtc warnings
  ARM: dts: porter: Fix W=1 dtc warnings
  ARM: dts: marzen: Fix W=1 dtc warnings
  ARM: dts: lager: Fix W=1 dtc warnings
  ARM: dts: kzm9g: Fix W=1 dtc warnings
  ARM: dts: kzm9d: Fix W=1 dtc warnings
  ARM: dts: koelsch: Fix W=1 dtc warnings
  ARM: dts: gose: Fix W=1 dtc warnings
  ARM: dts: genmai: Fix W=1 dtc warnings
  ARM: dts: bockw: Fix W=1 dtc warnings
  ARM: dts: armadillo800eva: Fix W=1 dtc warnings
  ARM: dts: ape6evm: Fix W=1 dtc warnings
  ARM: dts: sh73a0: Fix W=1 dtc warnings
  ARM: dts: r8a7794: Fix W=1 dtc warnings
  ARM: dts: r8a7793: Fix W=1 dtc warnings
  ARM: dts: r8a7791: Fix W=1 dtc warnings
  ARM: dts: r8a7790: Fix W=1 dtc warnings
  ARM: dts: r8a7778: Fix W=1 dtc warnings
  ARM: dts: r8a7740: Fix W=1 dtc warnings
  ARM: dts: r8a73a4: Fix W=1 dtc warnings
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-13 15:37:25 -07:00
Olof Johansson 95eb940c0e Topic branch for adding Exynos 5410 Odroid XU board for v4.8.
This brings support for Hardkernel's Odroid XU board.  It was the first
 design with big.LITTLE SoC from Samsung: Exynos5410.  The board is not
 very popular.  Newer XU3 and XU4 got more attention.
 
 Board details:
 1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is
    enabled),
 2. 2 GB DDR3 RAM,
 3. PowerVR SGX544MP3 GPU (not enabled in DTS),
 4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4,
 5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of
    revisions though),
 6. eMMC 4.5 and microSD slots.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXVWVcAAoJEME3ZuaGi4PXFVQP/3JyYEYpBw+6tu0PasYz2cYr
 D2fprLkHlfFOY+wGdHoTuBsjsOj1nwTXyVAA/zhIqudgJFXH67vR+BABoCDVT7J0
 /pYfMT4rm9Wa4ddKJnE6bv78IbAI52S1tzKsHRi+YlceVbKFUWJAqSsaJYVDOaci
 Sxg4/sbD2VcU7xlDNw2lSux6du3MEkdbarOd3l58eKMwvqSRCmvx7YultrrFwDhV
 JByy1VG+WXAWyaE59VRZ+kAGHMDTz7KK8YNjkUGmgJK0Ryd6C8kETw1ZC8fiA/tZ
 +QlnDehngSZ15x79RI7JUj/F+UY2QrMDzLk6qIa2E3sgWv4aJ0csFymk1+mUDhJF
 vO8EwqF+YnbwNG1mmzmqBgeQxb3EdKdM/onanpazIlQAlpaJIJpBbKR8x2Doa6TZ
 g/f37FQW3l1DEBT3H2IXd6Yx1FgCnlFjPb0fwnS5sG05YyOEKdKTss+5LKShG5J4
 VeN8/EmaocRvQx0GE0pRr0nhuaWt9E59jXrAmBe8OUVIjQYTvxRoH2mWEQ0iuOEZ
 +VRD/WwtkdqeUBOSFYckVWDanJPqh3qLZ+eCEqoguMKtqCTC3eJp2euIBsawA4DW
 Nxl6Zy5iIMfc7j4VtoDy7qDtBJ1hzeX8gzRE+tVXrtpiMs2gd1+Jkofr2nTIihU9
 h/Hg9dc34pSV9by8hutW
 =7u0/
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-odroid-xu-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Topic branch for adding Exynos 5410 Odroid XU board for v4.8.

This brings support for Hardkernel's Odroid XU board.  It was the first
design with big.LITTLE SoC from Samsung: Exynos5410.  The board is not
very popular.  Newer XU3 and XU4 got more attention.

Board details:
1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is
   enabled),
2. 2 GB DDR3 RAM,
3. PowerVR SGX544MP3 GPU (not enabled in DTS),
4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4,
5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of
   revisions though),
6. eMMC 4.5 and microSD slots.

* tag 'samsung-dt-odroid-xu-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits)
  ARM: dts: exynos: Add watchdog and Security SubSystem to Exynos5410
  ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board
  ARM: dts: exynos: Add Thermal Management Unit to Exynos5410
  ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410
  dt-bindings: clock: Add watchdog and SSS clock IDs to Exynos5410
  dt-bindings: clock: Add TMU clock ID to Exynos5410
  ARM: dts: exynos: Add RTC and I2C to Exynos5410
  ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  ARM: dts: exynos: Add initial support for Odroid XU board
  ARM: dts: exynos: Add USB to Exynos5410
  ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap
  ARM: dts: exynos: Enable UART3 on Exynos5410
  ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc
  ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi
  ARM: dts: exynos: Move common nodes to exynos5.dtsi
  ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-13 14:51:58 -07:00
Florian Fainelli 2df1808dc0 ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC
Define the port mapping for the SmartRG SR400ACE device.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-13 12:44:46 -07:00
Florian Fainelli 2cd0c0202f ARM: dts: BCM5301X: Add SRAB interrupts
Add interrupt mapping for the Switch Register Access Block. Only 12
interrupts are usable at the moment even though up to 32 are dedicated
to the SRAB.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-13 12:43:39 -07:00
Florian Fainelli 59f0ce1a3e ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
Add the Switch Register Access Block which is a special piece of
hardware allowing us to perform indirect read/writes towards the
integrated BCM5301X Ethernet switch.

We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi
bus node to get proper binding between the BCMA instantiated core and
the Device Tree nodes. We will need that to be able to reference
Ethernet Device Tree nodes in a future patch adding the switch ports
layout.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-13 12:43:38 -07:00
Andy Gross 9e5d41d440 dts: qcom: apq8064: Add SCM firmware node
This patch adds the firmware node for the APQ8064

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-11 22:57:15 -05:00
Andy Gross e0e7da5dfd dts: qcom: msm8974: Add SCM firmware node
This patch adds the Qualcomm SCM firmware node.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-11 22:57:14 -05:00
Andy Gross 2b9b54666c dts: qcom: apq8084: Add SCM firmware node
This patch adds the firmware node for the SCM

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-11 22:57:14 -05:00
Andy Gross 71c0ed7217 ARM: dts: qcom: pma8084: Add pwrkey entry
This patch adds the power key device tree node.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-11 22:57:14 -05:00
Andy Gross a537b8d68e ARM: dts: qcom: Remove size elements from pmic reg
The #size-cells for the pmics are 0, but we specify a size in the
reg property so that MPP and GPIO modules can figure out how many
pins there are. Now that we've done that by counting irqs, we can
remove the size elements in the reg properties and be DT
compliant.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-06-11 22:57:14 -05:00
Stephen Boyd 5fda09b809 ARM: dts: qcom: Enable sdcard and emmc on apq8074 dragonboard
Enable the sdcard slot and wire up the regulators for the two
storage controllers found on the apq8074 dragonboard.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-11 22:57:14 -05:00
Stephen Boyd d04dc9521c ARM: dts: qcom: Enable RPM regulators on apq8074 dragonboard
Add the appropriate min/max voltages for the regulators on the
apq8074 dragonboard so that they can be used by clients properly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-11 22:57:14 -05:00
Rajesh Bhagat 6f0808c482 ARM: dts: ls1021a: Add dis_rxdet_inp3_quirk property to USB3 node
Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property
is used to disable rx detection in P3 PHY mode.

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 22:10:08 +08:00
Fabio Estevam f1472f82cc ARM: dts: imx6qdl-sabresd: Pass the correct PCI reset polarity
The PCI reset GPIO is active low, so represent it with the
GPIO_ACTIVE_LOW flag.

Even though the imx6 PCI driver will not take the polarity into account
in this case, it is better to provide a correct description in device-tree.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:36:10 +08:00
Christopher Spinrath a98704b46b ARM: dts: imx6q-cm-fx6: Relicense under GPLv2/X11
GPLv2-only devicetrees make reuse difficult for software components
licensed under a different license. In particular, the Utilite Pro
devicetree file (which includes imx6q-cm-fx6.dts) is already dual
licensed under GPLv2/X11.

Hence, relicense imx6q-cm-fx6.dts under GPLv2/X11 dual license.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:34:20 +08:00
Christopher Spinrath 1ad257d1c8 ARM: dts: imx6q: add support for the Utilite Pro
The CompuLab Utilite Pro is a miniature fanless desktop pc based on
the i.MX6 Quad powered cm-fx6 module. It features two serial ports,
USB OTG, 4x USB, analog audio and S/PDIF, 2x Gb Ethernet, HDMI and
DVI ports, an on-board 32GB SSD, a mmc slot, and on-board wifi/bt.

Add initial support for it including USB, Ethernet (both ports), sata
and HDMI support.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:34:16 +08:00
Christopher Spinrath 669c940a46 ARM: dts: imx6q: extend support for the cm-fx6
The cm-fx6 module has an on-board spi-flash chip for its firmware, an
eeprom (containing e.g. the mac address of the on-board Ethernet),
a sata port, a pcie controller, an USB hub, and an USB otg port.
Enable support for them. In addition, enable syscon poweroff support.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:33:40 +08:00
Christopher Spinrath 0c3bc8c943 ARM: dts: imx6q-cm-fx6: remove iomuxc container node
The imx6q-cm-fx6 iomuxc container node is not required. Remove it.

Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:33:01 +08:00
Stefan Wahren 17b35f2872 ARM: dts: imx28-tx28: fix dtc warning
This fixes the following dtc warning by removing the unnecessary unit:

Warning (unit_address_vs_reg): Node /matrix-keypad@0 has a unit name,
but no reg property

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:21:08 +08:00
Stefan Wahren 88ab101cd2 ARM: dts: imx28-cfa10049: fix dtc warning
This fixes the following dtc warning by removing the unnecessary unit:

Warning (unit_address_vs_reg): Node /onewire@0 has a unit name,
but no reg property

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:21:08 +08:00
Stefan Wahren 7cae24dfe9 ARM: dts: imx28-eukrea-mbmx28lc: add missing reg properties
This patch adds the missing reg properties for the regulator nodes
in order to fix the dtc warnings.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:21:05 +08:00
Stefan Wahren e57609aa53 ARM: dts: mxs: add missing reg properties for GPIO banks
This patch adds the missing reg properties for the MXS GPIO banks
in order to fix the dtc warnings.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:18:22 +08:00
Lucas Stach 31836adea2 ARM: dts: imx6: add support for Auvidea H100 board
The Auvidea H100 is a baseboard for the SolidRun MicroSOM.
Its primary feature is a Toshiba TC358743 HDMI to CSI decoder,
allowing the board to work as HDMI passthrough and framegrabber.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:10:08 +08:00
Lucas Stach a28eeb43ee ARM: dts: imx6: tag boards that have the HW workaround for ERR006687
Add the DT property to all boards that have the hardware workaround
for erratum ERR006687 present. This allows the CPUidle driver to use
the deep idle states, even if the FEC is active.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 17:03:44 +08:00
Juergen Borleis f255f89f93 ARM: dts: imx6: fix IPU1 DI1 node name
This node describes the DI1 port of IPU, fix the node name to reflect this.
There's currently no user of this node in mainline, so this change should
not break any supported platforms.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 14:55:59 +08:00
Fabio Estevam e5adcb7c8a ARM: dts: imx6ul-14x14-evk: Add LCD and backlight support
Add support for the LCD8000-43T display and for the backlight
controlled via PWM1.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 14:53:17 +08:00
Geert Uytterhoeven 2e7c416cba ARM: dts: imx: Use generic uart-has-rtscts DT property
As of commit 1006ed7e1b ("serial: imx: Use generic uart-has-rtscts
DT property"), the Freescale IMX UART driver recognizes the generic
"uart-has-rtscts" DT property, deprecating the vendor-specific
"fsl,uart-has-rtscts" DT property. Hence replace the latter by the
former in all DTS files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 14:48:05 +08:00
Geert Uytterhoeven aee9911181 ARM: dts: imx28: Use generic uart-has-rtscts DT property
As of commit 182cdcb8bb ("serial: mxs-auart: Use generic
uart-has-rtscts DT property"), the Freescale MXS AUART driver recognizes
the generic "uart-has-rtscts" DT property, deprecating the
vendor-specific "fsl,uart-has-rtscts" DT property. Hence replace the
latter by the former in all DTS files.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-11 14:48:00 +08:00
Andy Gross 938b4d4ea1 Revert "Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node""
This adds back the dma channels for the i2c1 node.  This is safe now
that the qcom,controlled-remotely changes are in place and will be used
on the boards that require it.

This reverts commit 10c0f0e92f.
2016-06-10 23:50:43 -05:00
Andy Gross d44cbb1e9c Revert "Revert "dts: msm8974: Add blsp2_bam dma node""
This puts back in place the blsp2_bam node.  This can be safely added
due to the addition of the special qcom,controlled-remotely flag that
will be used on specific boards that require it.

This reverts commit 338d518898.
2016-06-10 23:50:29 -05:00
Jon Mason 5fa1026a3e ARM: dts: NSP: Add PL330 support
Add PL330 support to the the Broadcom Northstar Plus device tree.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-10 11:33:21 -07:00
Jon Mason 707bbc4571 ARM: dts: NSP: Add XMC board support
The BCM958525XMC board is a smaller form factor typically used as
controller boards for switches.  This smaller board has less devices
pinned out, so only a few need be populated in the device tree.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-06-10 11:33:08 -07:00
Alexandre Belloni 64c0703e26 ARM: dts: at91: calao: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:59:30 +02:00
Alexandre Belloni 8a9f16810d ARM: dts: at91: pm9g45: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:59:24 +02:00
Alexandre Belloni 05e41d60cb ARM: dts: at91: mpa1600: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Cc: Joachim Eastwood <manabian@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:59:19 +02:00
Alexandre Belloni e7dc74f4a1 ARM: dts: at91: ge863-pro3: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:59:13 +02:00
Alexandre Belloni 0955e0d62f ARM: dts: at91: at91-foxg20: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Cc: Sergio Tanzilli <tanzilli@acmesystems.it>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:59:08 +02:00
Alexandre Belloni a1448b80e1 ARM: dts: at91: at91-cosino: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Cc: Rodolfo Giometti <giometti@linux.it>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:59:03 +02:00
Alexandre Belloni 0860fbdd02 ARM: dts: at91: at91-ariag25: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Cc: Sergio Tanzilli <tanzilli@acmesystems.it>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:58:56 +02:00
Alexandre Belloni c6fde4f5aa ARM: dts: at91: animeo_ip: remove leftovers clock definition
The clocks group properties and the clock@0 node have been obsolete for two
years, remove them.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:58:34 +02:00
Alexandre Belloni ee3e760409 ARM: dts: at91: ma5d4: properly define crystals frequencies
The Denx MA5D4 dts doesn't properly define the slow_xtal and main_xtal
frequencies, the PMC then has to fallback to using the RC oscillators whose
precision is not really good.

As both crystals are populated, define their frequencies, see p17 of
http://www.denx-cs.de/sites/all/files/MA5D4.HWM_.002.pdf

Also, remove the obsolete main_clock definition.

Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:49:16 +02:00
Alexandre Belloni 4975fb10df ARM: dts: at91: usb_a9g20: use stdout-path
Use stdout-path to specify the console and remove the console argument from
the kernel command line.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-10 16:48:41 +02:00
Marek Vasut 542a8d98f1 ARM: dts: mxs: Add SanDisk Sansa Fuze+ support
Add support for this small MP3 player based on STMP3780 (rev.3).
Currently supported are both external microSD and internal SD-NAND
bridge, PWM and USB gadget.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-10 21:03:55 +08:00
Marek Vasut 053034f0a2 ARM: dts: mxs: Add Creative X-Fi3 support
Add support for this small MP3 player based on STMP3780 (rev.4).
Currently supported is both external microSD and internal SD-NAND
bridge, PWM and USB gadget.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-10 21:03:50 +08:00
Marek Vasut d33c731b8a ARM: dts: mxs: Add AUART2 pinmux
Add 2-pin pinmux settings for AUART2.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-10 21:03:44 +08:00
Marek Vasut 1ebcb168c5 ARM: dts: mxs: Add SSP2 SD mux
Add pinmux configuration for SSP2 port in SD mode, both for
the 4-bit and 8-bit case.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-10 21:03:36 +08:00
Kishon Vijay Abraham I 605b3d302d ARM: dts: DRA7: fix unit address of second PCIe instance
The unit address of the second PCIe instance
is set to be same as that of the first instance
(copy-paste error).

Fix it.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:09 -07:00
H. Nikolaus Schaller 4393dd4eca ARM: dts: omap3-gta04: Add RFID eeprom node
Define RFID eeprom node which is present on gta04
device.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Peter Ujfalusi d471c277f4 ARM: dts: omap4-duovero: Add pdmclk binding for audio
The twl6040 codec is generating the pdmclk, which is used by the McPDM as
functional clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Peter Ujfalusi 26b87e04de ARM: dts: omap4-var-som-om44: Add pdmclk binding for audio
The twl6040 codec is generating the pdmclk, which is used by the McPDM as
functional clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Peter Ujfalusi 3cec531b47 ARM: dts: omap4-sdp: Add pdmclk binding for audio
The twl6040 codec is generating the pdmclk, which is used by the McPDM as
functional clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Peter Ujfalusi 2ab60a38ac ARM: dts: omap4-panda-common: Add pdmclk binding for audio
The twl6040 codec is generating the pdmclk, which is used by the McPDM as
functional clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Peter Ujfalusi 9e21c75d92 ARM: dts: omap5-board-common: Add pdmclk binding for audio
The twl6040 codec is generating the pdmclk, which is used by the McPDM as
functional clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Peter Ujfalusi 138e996c21 ARM: dts: omap3: Add clocks to McBSP nodes
Add clock properties to the McBSP nodes. McBSP2 and 3 need to have ick also
since the Sidetone block of these modules are operating using the McBSP
interface clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Andrew F. Davis fd4eeada1b ARM: dts: am335x-bone-common: Mark MAC as having only one PHY
Currently am33xx.dtsi declares the MAC controller to have two
slave ports, on these boards we only use one, so set the slave
count to one. This eliminates a console error message when
the non-existent PHY is not detected.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Andrew F. Davis 759bc77b9a ARM: dts: am437x-idk-evm: Mark MAC as having only one PHY
Currently am4372.dtsi declares the MAC controller to have two
slave ports, on this board we only use one, so set the slave
count to one. This eliminates a console error message when
the non-existent PHY is not detected.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Robert P. J. Day a5206553ba ARM: dts: Correct misspelling, "emda3" -> "edma3"
Correct misspelling, "emda3" -> "edma3".

Reported-by: Adam J Allison <adamj.allison@gmail.com>
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:08 -07:00
Misael Lopez Cruz 7172e745d5 ARM: dts: dra72-evm: Rename 3.3V regulator tag
Rename the tag of the 3.3 V regulator used in the DRA72 EVM in
order to have a consistent tag name with the DRA7 EVM.  This
is useful when the regulator needs to be referenced in common
dtsi files (i.e. for common companion boards like JAMR3 [1]).

[1] http://www.ti.com.cn/cn/lit/ug/sprui52/sprui52.pdf

Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:07 -07:00
Vignesh R eaa03e4251 ARM: dts: am335x-icev2: Add DT node for TI PCA9536
AM335x ICE board has a TI PCA9536 chip connected to I2C0 at address
0x41. Add DT entry for the same.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Kristofer Martinez <Kristofer.S.Martinez@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-06-10 04:58:07 -07:00