Before any data write, convert inline data to normal data and set
i_inline_version to CEPH_INLINE_NONE. The OSD request that saves
inline data to object contains 3 operations (CMPXATTR, WRITE and
SETXATTR). It compares a xattr named 'inline_version' to prevent
old data overwrites newer data.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
we can't use getattr to fetch inline data while holding Fr cap,
because it can cause deadlock. If we need to sync read inline data,
drop cap refs first, then use getattr to fetch inline data.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
we can't use getattr to fetch inline data after getting Fcr caps,
because it can cause deadlock. The solution is try bringing inline
data to page cache when not holding any cap, and hope the inline
data page is still there after getting the Fcr caps. If the page
is still there, pin it in page cache for later IO.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
allow specifying position of extent operation in multi-operations
osd request. This is required for cephfs to convert inline data to
normal data (compare xattr, then write object).
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
Current code set new file/directory's initial ACL in a non-atomic
manner.
Client first sends request to MDS to create new file/directory, then set
the initial ACL after the new file/directory is successfully created.
The fix is include the initial ACL in create/mkdir/mknod MDS requests.
So MDS can handle creating file/directory and setting the initial ACL in
one request.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Following sequence of events can happen.
- Client releases an inode, queues cap release message.
- A 'lookup' reply brings the same inode back, but the reply
doesn't contain xattrs because MDS didn't receive the cap release
message and thought client already has up-to-data xattrs.
The fix is force sending a getattr request to MDS if xattrs_version
is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client
does not have xattr.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
generic_write_checks() may update 'pos', so we need to pass 'pos'
to ceph_sync_write() and ceph_sync_direct_write();
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
For now, just use the same thing we pass to ->direct_IO() - it's all
iovec-based at the moment. Pass it explicitly to iov_iter_init() and
account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO()
uses.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
iov_iter-using variant of generic_file_aio_read(). Some callers
converted. Note that it's still not quite there for use as ->read_iter() -
we depend on having zero iter->iov_offset in O_DIRECT case. Fortunately,
that's true for all converted callers (and for generic_file_aio_read() itself).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
all callers of ->aio_read() and ->aio_write() have iov/nr_segs already
checked - generic_segment_checks() done after that is just an odd way
to spell iov_length().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We had a number of new features in ext4 during this merge window
(ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
there were many more regression and bug fixes this time around. It
didn't help that xfstests hadn't been fully updated to fully stress
test COLLAPSE_RANGE until after -rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=gi42
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"These are regression and bug fixes for ext4.
We had a number of new features in ext4 during this merge window
(ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
there were many more regression and bug fixes this time around. It
didn't help that xfstests hadn't been fully updated to fully stress
test COLLAPSE_RANGE until after -rc1"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
ext4: disable COLLAPSE_RANGE for bigalloc
ext4: fix COLLAPSE_RANGE failure with 1KB block size
ext4: use EINVAL if not a regular file in ext4_collapse_range()
ext4: enforce we are operating on a regular file in ext4_zero_range()
ext4: fix extent merging in ext4_ext_shift_path_extents()
ext4: discard preallocations after removing space
ext4: no need to truncate pagecache twice in collapse range
ext4: fix removing status extents in ext4_collapse_range()
ext4: use filemap_write_and_wait_range() correctly in collapse range
ext4: use truncate_pagecache() in collapse range
ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGE
ext4: fix ext4_count_free_clusters() with EXT4FS_DEBUG and bigalloc enabled
ext4: always check ext4_ext_find_extent result
ext4: fix error handling in ext4_ext_shift_extents
ext4: silence sparse check warning for function ext4_trim_extent
ext4: COLLAPSE_RANGE only works on extent-based files
ext4: fix byte order problems introduced by the COLLAPSE_RANGE patches
ext4: use i_size_read in ext4_unaligned_aio()
fs: disallow all fallocate operation on active swapfile
fs: move falloc collapse range check into the filesystem methods
...
Pull vfs updates from Al Viro:
"The first vfs pile, with deep apologies for being very late in this
window.
Assorted cleanups and fixes, plus a large preparatory part of iov_iter
work. There's a lot more of that, but it'll probably go into the next
merge window - it *does* shape up nicely, removes a lot of
boilerplate, gets rid of locking inconsistencie between aio_write and
splice_write and I hope to get Kent's direct-io rewrite merged into
the same queue, but some of the stuff after this point is having
(mostly trivial) conflicts with the things already merged into
mainline and with some I want more testing.
This one passes LTP and xfstests without regressions, in addition to
usual beating. BTW, readahead02 in ltp syscalls testsuite has started
giving failures since "mm/readahead.c: fix readahead failure for
memoryless NUMA nodes and limit readahead pages" - might be a false
positive, might be a real regression..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
missing bits of "splice: fix racy pipe->buffers uses"
cifs: fix the race in cifs_writev()
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
kill generic_file_buffered_write()
ocfs2_file_aio_write(): switch to generic_perform_write()
ceph_aio_write(): switch to generic_perform_write()
xfs_file_buffered_aio_write(): switch to generic_perform_write()
export generic_perform_write(), start getting rid of generic_file_buffer_write()
generic_file_direct_write(): get rid of ppos argument
btrfs_file_aio_write(): get rid of ppos
kill the 5th argument of generic_file_buffered_write()
kill the 4th argument of __generic_file_aio_write()
lustre: don't open-code kernel_recvmsg()
ocfs2: don't open-code kernel_recvmsg()
drbd: don't open-code kernel_recvmsg()
constify blk_rq_map_user_iov() and friends
lustre: switch to kernel_sendmsg()
ocfs2: don't open-code kernel_sendmsg()
take iov_iter stuff to mm/iov_iter.c
process_vm_access: tidy up a bit
...
Currently some file system have IS_SWAPFILE check in their fallocate
implementations and some do not. However we should really prevent any
fallocate operation on swapfile so move the check to vfs and remove the
redundant checks from the file systems fallocate implementations.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ceph_atomic_open() calls ceph_open() after receiving the MDS reply.
ceph_open() grabs an extra open file reference. (The open request
already holds an open file reference)
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Synchronize object->store_limit[_l] with new inode->i_size after file writing.
Tested-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
Signed-off-by: Min Chen <minchen@ubuntukylin.com>
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
The fsync(dirfd) only covers namespace operations, not inode updates.
We do not need to cover setattr variants or O_TRUNC.
Reported-by: Al Viro <viro@xeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Use min_t(size_t, ...) instead of plain min(), which does strict type
checking, to avoid compile warning on i386.
Cc: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
For readv/preadv sync-operatoin, ceph only do the first iov.
Now implement this.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
For writev/pwritev sync-operatoin, ceph only do the first iov.
I divided the write-sync-operation into two functions. One for
direct-write, other for none-direct-sync-write. This is because for
none-direct-sync-write we can merge iovs to one. But for direct-write,
we can't merge iovs.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Adding support for fscache to the Ceph filesystem. This would bring it to on
par with some of the other network filesystems in Linux (like NFS, AFS, etc...)
In order to mount the filesystem with fscache the 'fsc' mount option must be
passed.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
For sync_read/write, it may do multi stripe operations.If one of those
met erro, we return the former successed size rather than a error value.
There is a exception for write-operation met -EOLDSNAPC.If this occur,we
retry the whole write again.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
cephfs . show_layout
>layyout.data_pool: 0
>layout.object_size: 4194304
>layout.stripe_unit: 4194304
>layout.stripe_count: 1
TestA:
>dd if=/dev/urandom of=test bs=1M count=2 oflag=direct
>dd if=/dev/urandom of=test bs=1M count=2 seek=4 oflag=direct
>dd if=test of=/dev/null bs=6M count=1 iflag=direct
The messages from func striped_read are:
ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT
ceph: file.c:350 : striped_read 2097152~4194304 (read 2097152) got 0 HITSTRIPE SHORT
ceph: file.c:381 : zero tail 4194304
ceph: file.c:390 : striped_read returns 6291456
The hole of file is from 2M--4M.But actualy it zero the last 4M include
the last 2M area which isn't a hole.
Using this patch, the messages are:
ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT
ceph: file.c:358 : zero gap 2097152 to 4194304
ceph: file.c:350 : striped_read 4194304~2097152 (read 4194304) got 2097152
ceph: file.c:384 : striped_read returns 6291456
TestB:
>echo majianpeng > test
>dd if=test of=/dev/null bs=2M count=1 iflag=direct
The messages are:
ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT
ceph: file.c:350 : striped_read 11~6291445 (read 11) got 0 HITSTRIPE SHORT
ceph: file.c:390 : striped_read returns 11
For this case,it did once more striped_read.It's no meaningless.
Using this patch, the message are:
ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT
ceph: file.c:384 : striped_read returns 11
Big thanks to Yan Zheng for the patch.
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
This patch implements fallocate and punch hole support for Ceph kernel client.
Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
I encountered below deadlock when running fsstress
wmtruncate work truncate MDS
--------------- ------------------ --------------------------
lock i_mutex
<- truncate file
lock i_mutex (blocked)
<- revoking Fcb (filelock to MIX)
send request ->
handle request (xlock filelock)
At the initial time, there are some dirty pages in the page cache.
When the kclient receives the truncate message, it reduces inode size
and creates some 'out of i_size' dirty pages. wmtruncate work can't
truncate these dirty pages because it's blocked by the i_mutex. Later
when the kclient receives the cap message that revokes Fcb caps, It
can't flush all dirty pages because writepages() only flushes dirty
pages within the inode size.
When the MDS handles the 'truncate' request from kclient, it waits
for the filelock to become stable. But the filelock is stuck in
unstable state because it can't finish revoking kclient's Fcb caps.
The truncate pagecache locking has already caused lots of trouble
for use. I think it's time simplify it by introducing a new mutex.
We use the new mutex to prevent concurrent truncate_inode_pages().
There is no need to worry about race between buffered write and
truncate_inode_pages(), because our "get caps" mechanism prevents
them from concurrent execution.
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
All of the early exit paths need to drop the mutex; it is only the normal
path through the function that does not. Skip the unlock in that case
with a goto out_unlocked.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Jianpeng Ma <majianpeng@gmail.com>
Only for ceph_sync_write, the osd can return EOLDSNAPC.so move the
related codes after the call ceph_sync_write.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Sending reads and writes through the sync read/write paths bypasses the
page cache, which is not expected or generally a good idea. Removing
the write check is safe as there is a conditional vfs_fsync_range() later
in ceph_aio_write that already checks for the same flag (via
IS_SYNC(inode)).
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>
We pass in a u64 value for "len" and then immediately truncate away the
upper 32 bits.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <alex.elder@linaro.org>
Pull Ceph updates from Sage Weil:
"There is some follow-on RBD cleanup after the last window's code drop,
a series from Yan fixing multi-mds behavior in cephfs, and then a
sprinkling of bug fixes all around. Some warnings, sleeping while
atomic, a null dereference, and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (36 commits)
libceph: fix invalid unsigned->signed conversion for timespec encoding
libceph: call r_unsafe_callback when unsafe reply is received
ceph: fix race between cap issue and revoke
ceph: fix cap revoke race
ceph: fix pending vmtruncate race
ceph: avoid accessing invalid memory
libceph: Fix NULL pointer dereference in auth client code
ceph: Reconstruct the func ceph_reserve_caps.
ceph: Free mdsc if alloc mdsc->mdsmap failed.
ceph: remove sb_start/end_write in ceph_aio_write.
ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.
ceph: fix sleeping function called from invalid context.
ceph: move inode to proper flushing list when auth MDS changes
rbd: fix a couple warnings
ceph: clear migrate seq when MDS restarts
ceph: check migrate seq before changing auth cap
ceph: fix race between page writeback and truncate
ceph: reset iov_len when discarding cap release messages
ceph: fix cap release race
libceph: fix truncate size calculation
...
The locking order for pending vmtruncate is wrong, it can lead to
following race:
write wmtruncate work
------------------------ ----------------------
lock i_mutex
check i_truncate_pending check i_truncate_pending
truncate_inode_pages() lock i_mutex (blocked)
copy data to page cache
unlock i_mutex
truncate_inode_pages()
The fix is take i_mutex before calling __ceph_do_pending_vmtruncate()
Fixes: http://tracker.ceph.com/issues/5453
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Either in vfs_write or io_submit,it call file_start/end_write.
The different between file_start/end_write and sb_start/end_write is
file_ only handle regular file.But i think in ceph_aio_write,it only
for regular file.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Acked-by: Yan, Zheng <zheng.z.yan@intel.com>
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support
SEEK_DATA/SEEK_HOLE functions, we end up handling the similar
matter in lseek_execute() to update the current file offset
to the desired offset if it is valid, ceph also does the
simliar things at ceph_llseek().
To reduce the duplications, this patch make lseek_execute()
public accessible so that we can call it directly from the
underlying file systems.
Thanks Dave Chinner for this suggestion.
[AV: call it vfs_setpos(), don't bring the removed 'inode' argument back]
v2->v1:
- Add kernel-doc comments for lseek_execute()
- Call lseek_execute() in ceph->llseek()
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the incremental move toward supporting distinct data items in an
osd request some of the functions had "write_request" parameters to
indicate, basically, whether the data belonged to in_data or the
out_data. Now that we maintain the data fields in the op structure
there is no need to indicate the direction, so get rid of the
"write_request" parameters.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Fix printk format warnings by using %zd for 'ssize_t' variables:
fs/ceph/file.c:751:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat]
fs/ceph/file.c:762:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Sage Weil <sage@inktank.com>
copy write checks in __generic_file_aio_write to ceph_aio_write.
To make these checks cover sync write path.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
There is deadlock as illustrated bellow. The fix is taking i_mutex
before getting Fw cap reference.
write truncate MDS
--------------------- -------------------- --------------
get Fw cap
lock i_mutex
lock i_mutex (blocked)
request setattr.size ->
<- revoke Fw cap
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
An osd request currently has two callbacks. They inform the
initiator of the request when we've received confirmation for the
target osd that a request was received, and when the osd indicates
all changes described by the request are durable.
The only time the second callback is used is in the ceph file system
for a synchronous write. There's a race that makes some handling of
this case unsafe. This patch addresses this problem. The error
handling for this callback is also kind of gross, and this patch
changes that as well.
In ceph_sync_write(), if a safe callback is requested we want to add
the request on the ceph inode's unsafe items list. Because items on
this list must have their tid set (by ceph_osd_start_request()), the
request added *after* the call to that function returns. The
problem with this is that there's a race between starting the
request and adding it to the unsafe items list; the request may
already be complete before ceph_sync_write() even begins to put it
on the list.
To address this, we change the way the "safe" callback is used.
Rather than just calling it when the request is "safe", we use it to
notify the initiator the bounds (start and end) of the period during
which the request is *unsafe*. So the initiator gets notified just
before the request gets sent to the osd (when it is "unsafe"), and
again when it's known the results are durable (it's no longer
unsafe). The first call will get made in __send_request(), just
before the request message gets sent to the messenger for the first
time. That function is only called by __send_queued(), which is
always called with the osd client's request mutex held.
We then have this callback function insert the request on the ceph
inode's unsafe list when we're told the request is unsafe. This
will avoid the race because this call will be made under protection
of the osd client's request mutex. It also nicely groups the setup
and cleanup of the state associated with managing unsafe requests.
The name of the "safe" callback field is changed to "unsafe" to
better reflect its new purpose. It has a Boolean "unsafe" parameter
to indicate whether the request is becoming unsafe or is now safe.
Because the "msg" parameter wasn't used, we drop that.
This resolves the original problem reportedin:
http://tracker.ceph.com/issues/4706
Reported-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
In ceph_sync_write(), if a safe callback is supplied with a request,
and an error is returned by ceph_osdc_wait_request(), a block of
code is executed to remove the request from the unsafe writes list
and drop references to capabilities acquired just prior to a call to
ceph_osdc_wait_request().
The only function used for this callback is sync_write_commit(),
and it does *exactly* what that block of error handling code does.
Now in ceph_osdc_wait_request(), if an error occurs (due to an
interupt during a wait_for_completion_interruptible() call),
complete_request() gets called, and that calls the request's
safe_callback method if it's defined.
So this means that this cleanup activity gets called twice in this
case, which is erroneous (and in fact leads to a crash).
Fix this by just letting the osd client handle the cleanup in
the event of an interrupt.
This resolves one problem mentioned in:
http://tracker.ceph.com/issues/4706
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
This ends up being a rather large patch but what it's doing is
somewhat straightforward.
Basically, this is replacing two calls with one. The first of the
two calls is initializing a struct ceph_osd_data with data (either a
page array, a page list, or a bio list); the second is setting an
osd request op so it associates that data with one of the op's
parameters. In place of those two will be a single function that
initializes the op directly.
That means we sort of fan out a set of the needed functions:
- extent ops with pages data
- extent ops with pagelist data
- extent ops with bio list data
and
- class ops with page data for receiving a response
We also have define another one, but it's only used internally:
- class ops with pagelist data for request parameters
Note that we *still* haven't gotten rid of the osd request's
r_data_in and r_data_out fields. All the osd ops refer to them for
their data. For now, these data fields are pointers assigned to the
appropriate r_data_* field when these new functions are called.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An extent type osd operation currently implies that there will
be corresponding data supplied in the data portion of the request
(for write) or response (for read) message. Similarly, an osd class
method operation implies a data item will be supplied to receive
the response data from the operation.
Add a ceph_osd_data pointer to each of those structures, and assign
it to point to eithre the incoming or the outgoing data structure in
the osd message. The data is not always available when an op is
initially set up, so add two new functions to allow setting them
after the op has been initialized.
Begin to make use of the data item pointer available in the osd
operation rather than the request data in or out structure in
places where it's convenient. Add some assertions to verify
pointers are always set the way they're expected to be.
This is a sort of stepping stone toward really moving the data
into the osd request ops, to allow for some validation before
making that jump.
This is the first in a series of patches that resolve:
http://tracker.ceph.com/issues/4657
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.
In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.
As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops. And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.
This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used. The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2. So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.
The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.
Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.
It does not yet add per-op data, that's coming soon.
This resolves:
http://tracker.ceph.com/issues/4656
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define and use functions that encapsulate the initializion of a
ceph_osd_data structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Defer building the osd request until just before submitting it in
all callers except ceph_writepages_start(). (That caller will be
handed in the next patch.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch moves the call to ceph_osdc_build_request() out of
ceph_osdc_new_request() and into its caller.
This is in order to defer formatting osd operation information into
the request message until just before request is started.
The only unusual (ab)user of ceph_osdc_build_request() is
ceph_writepages_start(), where the final length of write request may
change (downward) based on the current inode size or the oldest
snapshot context with dirty data for the inode.
The remaining callers don't change anything in the request after has
been built.
This means the ops array is now supplied by the caller. It also
means there is no need to pass the mtime to ceph_osdc_new_request()
(it gets provided to ceph_osdc_build_request()). And rather than
passing a do_sync flag, have the number of ops in the ops array
supplied imply adding a second STARTSYNC operation after the READ or
WRITE requested.
This and some of the patches that follow are related to having the
messenger (only) be responsible for filling the content of the
message header, as described here:
http://tracker.ceph.com/issues/4589
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
We should advance the user data pointer by _len_ instead of _written_.
_len_ is the data length written in each iteration while _written_ is the
accumulated data length we have writtent out.
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Tested-by: Sage Weil <sage@inktank.com>
Record the byte count for an osd request rather than the page count.
The number of pages can always be derived from the byte count (and
alignment/offset) but the reverse is not true.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request defines information about where data to be read
should be placed as well as where data to write comes from.
Currently these are represented by common fields.
Keep information about data for writing separate from data to be
read by splitting these into data_in and data_out fields.
This is the key patch in this whole series, in that it actually
identifies which osd requests generate outgoing data and which
generate incoming data. It's less obvious (currently) that an osd
CALL op generates both outgoing and incoming data; that's the focus
of some upcoming work.
This resolves:
http://tracker.ceph.com/issues/4127
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request uses either pages or a bio list for its data. Use a
union to record information about the two, and add a data type
tag to select between them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull the fields in an osd request structure that define the data for
the request out into a separate structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently ceph_osdc_new_request() assigns an osd request's
r_num_pages and r_alignment fields. The only thing it does
after that is call ceph_osdc_build_request(), and that doesn't
need those fields to be assigned.
Move the assignment of those fields out of ceph_osdc_new_request()
and into its caller. As a result, the page_align parameter is no
longer used, so get rid of it.
Note that in ceph_sync_write(), the value for req->r_num_pages had
already been calculated earlier (as num_pages, and fortunately
it was computed the same way). So don't bother recomputing it,
but because it's not needed earlier, move that calculation after the
call to ceph_osdc_new_request(). Hold off making the assignment to
r_alignment, doing it instead r_pages and r_num_pages are
getting set.
Similarly, in start_read(), nr_pages already holds the number of
pages in the array (and is calculated the same way), so there's no
need to recompute it. Move the assignment of the page alignment
down with the others there as well.
This and the next few patches are preparation work for:
http://tracker.ceph.com/issues/4127
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
(This is being reposted. The first one had a problem because it
erroneously added a similar change elsewhere; that change has been
dropped.)
The next patch in this series points out that the calculation for
the number of pages in an osd request is getting done twice. It
is not obvious, but the result of both calculations is identical.
This patch simplifies one of them--as a separate step--to make
it clear that the transformation in the next patch is valid.
In ceph_sync_write() there is some magic that computes page_align
for an osd request. But a little analysis shows it can be
simplified.
First, we have:
io_align = pos & ~PAGE_MASK;
which is used here:
page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
Note (pos - io_align) simply rounds "pos" down to the nearest multiple
of the page size.
We also have:
buf_align = (unsigned long)data & ~PAGE_MASK;
Adding buf_align to that rounded-down "pos" value will stay within
the same page; the result will just be offset by the page offset for
the "data" pointer. The final mask therefore leaves just the value
of "buf_align".
One more simplification. Note that the result of calc_pages_for()
is invariant of which page the offset starts in--the only thing that
matters is the offset within the starting page. We will have
put the proper page offset to use into "page_align", so just use
that in calculating num_pages.
This resolves:
http://tracker.ceph.com/issues/4166
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
make __ceph_do_pending_vmtruncate() acquire the i_mutex if the caller
does not hold the i_mutex, so ceph_aio_read() can call safely.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
ceph_aio_write() has an optimization that marks CEPH_CAP_FILE_WR
cap dirty before data is copied to page cache and inode size is
updated. The optimization avoids slow cap revocation caused by
balance_dirty_pages(), but introduces inode size update race. If
ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. So just remove the
optimization.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
commit 22cddde104 breaks the atomicity of write operation, it also
introduces a deadlock between write and truncate.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Conflicts:
fs/ceph/addr.c
Pull Ceph updates from Sage Weil:
"A few groups of patches here. Alex has been hard at work improving
the RBD code, layout groundwork for understanding the new formats and
doing layering. Most of the infrastructure is now in place for the
final bits that will come with the next window.
There are a few changes to the data layout. Jim Schutt's patch fixes
some non-ideal CRUSH behavior, and a set of patches from me updates
the client to speak a newer version of the protocol and implement an
improved hashing strategy across storage nodes (when the server side
supports it too).
A pair of patches from Sam Lang fix the atomicity of open+create
operations. Several patches from Yan, Zheng fix various mds/client
issues that turned up during multi-mds torture tests.
A final set of patches expose file layouts via virtual xattrs, and
allow the policies to be set on directories via xattrs as well
(avoiding the awkward ioctl interface and providing a consistent
interface for both kernel mount and ceph-fuse users)."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits)
libceph: add support for HASHPSPOOL pool flag
libceph: update osd request/reply encoding
libceph: calculate placement based on the internal data types
ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
ceph: update "ceph_features.h"
libceph: decode into cpu-native ceph_pg type
libceph: rename ceph_pg -> ceph_pg_v1
rbd: pass length, not op for osd completions
rbd: move rbd_osd_trivial_callback()
libceph: use a do..while loop in con_work()
libceph: use a flag to indicate a fault has occurred
libceph: separate non-locked fault handling
libceph: encapsulate connection backoff
libceph: eliminate sparse warnings
ceph: eliminate sparse warnings in fs code
rbd: eliminate sparse warnings
libceph: define connection flag helpers
rbd: normalize dout() calls
rbd: barriers are hard
rbd: ignore zero-length requests
...
The "num_reply" parameter to ceph_osdc_new_request() is never
used inside that function, so get rid of it.
Note that ceph_sync_write() passes 2 for that argument, while all
other callers pass 1. It doesn't matter, but perhaps someone should
verify this doesn't indicate a problem.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The mds now sends back a created inode if the create request
performed the create. If the file already existed, no inode is
returned in the reply. This allows ceph to set the created flag
in atomic_open so that permissions are properly checked in the case
that the file wasn't created by the create call to the mds.
To ensure compability with previous kernels, a feature for sending
back the inode in the create reply was added, so that the mds will
only send back the inode if the client indicates it supports the
feature.
Signed-off-by: Sam Lang <sam.lang@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The error returned by ceph_mdsc_do_request includes errors sending the
request, errors on timeout, or any errors coming from the mds. If
ceph_mdsc_do_request returns an error, the reply struct will most likely
be bogus. We need to bail out and propogate the error instead of
overwriting it.
Signed-off-by: Sam Lang <sam.lang@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Pull Ceph update from Sage Weil:
"There are a few different groups of commits here. The largest is
Alex's ongoing work to enable the coming RBD features (cloning,
striping). There is some cleanup in libceph that goes along with it.
Cyril and David have fixed some problems with NFS reexport (leaking
dentries and page locks), and there is a batch of patches from Yan
fixing problems with the fs client when running against a clustered
MDS. There are a few bug fixes mixed in for good measure, many of
which will be going to the stable trees once they're upstream.
My apologies for the late pull. There is still a gremlin in the rbd
map/unmap code and I was hoping to include the fix for that as well,
but we haven't been able to confirm the fix is correct yet; I'll send
that in a separate pull once it's nailed down."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (68 commits)
rbd: get rid of rbd_{get,put}_dev()
libceph: register request before unregister linger
libceph: don't use rb_init_node() in ceph_osdc_alloc_request()
libceph: init event->node in ceph_osdc_create_event()
libceph: init osd->o_node in create_osd()
libceph: report connection fault with warning
libceph: socket can close in any connection state
rbd: don't use ENOTSUPP
rbd: remove linger unconditionally
rbd: get rid of RBD_MAX_SEG_NAME_LEN
libceph: avoid using freed osd in __kick_osd_requests()
ceph: don't reference req after put
rbd: do not allow remove of mounted-on image
libceph: Unlock unprocessed pages in start_read() error path
ceph: call handle_cap_grant() for cap import message
ceph: Fix __ceph_do_pending_vmtruncate
ceph: Don't add dirty inode to dirty list if caps is in migration
ceph: Fix infinite loop in __wake_requests
ceph: Don't update i_max_size when handling non-auth cap
bdi_register: add __printf verification, fix arg mismatch
...
But the kernel decided to call it "origin" instead. Fix most of the
sites.
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ceph_aio_write() has an optimization that marks cap EPH_CAP_FILE_WR
dirty before data is copied to page cache and inode size is updated.
If ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. The fix is move
ceph_{get,put}_cap_refs() into ceph_write_{begin,end}() and call
__ceph_mark_dirty_caps() after inode size is updated.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
If we are creating an osd request and get an invalid layout, return
an EINVAL to the caller. We switch up the return to have an error
code instead of NULL implying -ENOMEM.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
The initial ->atomic_open op was carried over from the old intent code,
which was incomplete and didn't really work. Replace it with a fresh
method. In particular:
* always attempt to do an atomic open+lookup, both for the create case
and for lookups of existing files.
* fix symlink handling by returning 1 to the VFS so that we can follow
the link to its destination. This fixes a longstanding ceph bug (#2392).
Signed-off-by: Sage Weil <sage@inktank.com>
Just pass struct file *. Methods are happier that way...
There's no need to return struct file * from finish_open() now,
so let it return int. Next: saner prototypes for parts in
namei.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Change of calling conventions:
old new
NULL 1
file 0
ERR_PTR(-ve) -ve
Caller *knows* that struct file *; no need to return it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and let finish_open() report having opened the file via that sucker.
Next step: don't modify od->filp at all.
[AV: FILE_CREATE was already used by cifs; Miklos' fix folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add an ->atomic_open implementation which replaces the atomic lookup+open+create
operation implemented via ->lookup and ->create operations.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
What was the purpose of this?
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This was an ill-conceived feature that has been removed from Ceph. Do
this gracefully:
- reject attempts to specify a preferred_osd via the ioctl
- stop exposing this information via virtual xattrs
- always fill in -1 for requests, in case we talk to an older server
- don't calculate preferred_osd placements/pgids
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Commit 06222e491e got the if wrong so that
it always evaluates as true. This is semantically harmless, but makes
SEEK_CUR and SEEK_SET needlessly query the server.
Rewrite the if to explicitly enumerate the cases we DO need a valid i_size
to make this code less fragile.
Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
We have been using i_lock to protect all kinds of data structures in the
ceph_inode_info struct, including lists of inodes that we need to iterate
over while avoiding races with inode destruction. That requires grabbing
a reference to the inode with the list lock protected, but igrab() now
takes i_lock to check the inode flags.
Changing the list lock ordering would be a painful process.
However, using a ceph-specific i_ceph_lock in the ceph inode instead of
i_lock is a simple mechanical change and avoids the ordering constraints
imposed by igrab().
Reported-by: Amon Ott <a.ott@m-privacy.de>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits)
ceph: document unlocked d_parent accesses
ceph: explicitly reference rename old_dentry parent dir in request
ceph: document locking for ceph_set_dentry_offset
ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bug
ceph: protect d_parent access in ceph_d_revalidate
ceph: protect access to d_parent
ceph: handle racing calls to ceph_init_dentry
ceph: set dir complete frag after adding capability
rbd: set blk_queue request sizes to object size
ceph: set up readahead size when rsize is not passed
rbd: cancel watch request when releasing the device
ceph: ignore lease mask
ceph: fix ceph_lookup_open intent usage
ceph: only link open operations to directory unsafe list if O_CREAT|O_TRUNC
ceph: fix bad parent_inode calc in ceph_lookup_open
ceph: avoid carrying Fw cap during write into page cache
libceph: don't time out osd requests that haven't been received
ceph: report f_bfree based on kb_avail rather than diffing.
ceph: only queue capsnap if caps are dirty
ceph: fix snap writeback when racing with writes
...
d_parent is protected by d_lock: use it when looking up a dentry's parent
directory inode. Also take a reference and drop it in the caller to avoid
a use-after-free.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We weren't properly calling lookup_instantiate_filp when setting up the
lookup intent, which could lead to file leakage on errors. So:
- use separate helper for the hidden snapdir translation, immediately
following the mds request
- use ceph_finish_lookup for the final dentry/return value dance in the
exit path
- lookup_instantiate_filp on success
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We only need to put these on the directory unsafe list if they have
side effects that fsync(2) should flush out.
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
We were always getting NULL here because the intent file f_dentry is always
NULL at this point, which means we were always passing NULL to
ceph_mdsc_do_request. In reality, this was fine, since this isn't
currently ever a write operation that needs to get strung on the dir's
unsafe list.
Use the dir explicitly, and only pass it if this open has side-effects that
a dir fsync should flush.
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The generic_file_aio_write call may block on balance_dirty_pages while we
flush data to the OSDs. If we hold a reference to the FILE_WR cap during
that interval revocation by the MDS (e.g., to do a stat(2)) may be very
slow.
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This allows us to force IO through the sync path which you normally only
get when multiple clients are reading/writing to the same file or by
mounting with -o sync. Among other things, this lets test programs verify
correctness with a single mount.
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases
we just return -EINVAL, in others we do the normal generic thing, and in others
we're simply making sure that the properly due-dilligence is done. For example
in NFS/CIFS we need to make sure the file size is update properly for the
SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself
that is all we have to do. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We were iterating across stripe boundaries properly, but not moving the
write buffer pointer forward. This caused us to rewrite the same data
after the break. Fix by adjusting the data pointer forward, and
recalculating the io and buffer alignment after the break.
Signed-off-by: Sage Weil <sage@newdream.net>
Getting ENOENT is equivalent to reading 0 bytes. Make that correction
before setting up the hit_stripe and was_short flags.
Fixes the following case:
dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0
dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct
Reported-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If we get a short read from the OSD because the object is small, we need to
zero the remainder of the buffer. For O_DIRECT reads, the attempted range
is not trimmed to i_size by the VFS, so we were actually looping
indefinitely.
Fix by trimming by i_size, and the unconditionally zeroing the trailing
range.
Reported-by: Jeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: Sage Weil <sage@newdream.net>
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock. This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: Sage Weil <sage@newdream.net>
The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the
one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the
flags value so that the callers can do it outside of i_lock.
Signed-off-by: Sage Weil <sage@newdream.net>
In sync_write_wait(), we assume that the newest request is at the
tail of unsafe write list. We should maintain the semantics here.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
For read operation, we have to set the argument _write_ of get_user_pages
to 1 since we will write data to pages. Also, we need to SetPageDirty before
releasing these pages.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The user buffer may be 512-byte aligned, not page-aligned. We were
assuming the buffer was page-aligned and only accounting for
non-page-aligned io offsets.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
We used to infer alignment of IOs within a page based on the file offset,
which assumed they matched. This broke with direct IO that was not aligned
to pages (e.g., 512-byte aligned IO). We were also trusting the alignment
specified in the OSD reply, which could have been adjusted by the server.
Explicitly specify the page alignment when setting up OSD IO requests.
Signed-off-by: Sage Weil <sage@newdream.net>
Normally when we open a file we already have a cap, and simply update the
wanted set. However, if we open a file for write, but don't have an auth
cap, that doesn't work; we need to open a new cap with the auth MDS. Only
reuse existing caps if we are opening for read or the existing cap is auth.
Signed-off-by: Sage Weil <sage@newdream.net>
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
Implement flock inode operation to support advisory file locking. All
lock/unlock operations are synchronous with the MDS. Lock state is
sent when reconnecting to a recovering MDS to restore the shared lock
state.
Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
If the file mode is marked as "lazy," perform cached/buffered reads when
the caps permit it. Adjust the rdcache_gen and invalidation logic
accordingly so that we manage our cache based on the FILE_CACHE -or-
FILE_LAZYIO cap bits.
Signed-off-by: Sage Weil <sage@newdream.net>
If we have marked a file as "lazy" (using the ceph ioctl), perform buffered
writes when the MDS caps allow it.
Signed-off-by: Sage Weil <sage@newdream.net>
This fixes an issue triggered by running concurrent syncs. One of the syncs
would go through while the other would just hang indefinitely. In any case, we
never actually want to wake a single waiter, so the *_all functions should
be used.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: clean up on forwarded aborted mds request
ceph: fix leak of osd authorizer
ceph: close out mds, osd connections before stopping auth
ceph: make lease code DN specific
fs/ceph: Use ERR_CAST
ceph: renew auth tickets before they expire
ceph: do not resend mon requests on auth ticket renewal
ceph: removed duplicated #includes
ceph: avoid possible null dereference
ceph: make mds requests killable, not interruptible
sched: add wait_for_completion_killable_timeout
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.
In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of
the returned value is the same as the type of the enclosing function.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T x;
identifier f;
@@
T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
...+> }
@@
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (59 commits)
ceph: reuse mon subscribe message instead of allocated anew
ceph: avoid resending queued message to monitor
ceph: Storage class should be before const qualifier
ceph: all allocation functions should get gfp_mask
ceph: specify max_bytes on readdir replies
ceph: cleanup pool op strings
ceph: Use kzalloc
ceph: use common helper for aborted dir request invalidation
ceph: cope with out of order (unsafe after safe) mds reply
ceph: save peer feature bits in connection structure
ceph: resync headers with userland
ceph: use ceph. prefix for virtual xattrs
ceph: throw out dirty caps metadata, data on session teardown
ceph: attempt mds reconnect if mds closes our session
ceph: clean up send_mds_reconnect interface
ceph: wait for mds OPEN reply to indicate reconnect success
ceph: only send cap releases when mds is OPEN|HUNG
ceph: dicard cap releases on mds restart
ceph: make mon client statfs handling more generic
ceph: drop src address(es) from message header [new protocol feature]
...
Now that the last user passing a NULL file pointer is gone we can remove
the redundant dentry argument and associated hacks inside vfs_fsynmc_range.
The next step will be removig the dentry argument from ->fsync, but given
the luck with the last round of method prototype changes I'd rather
defer this until after the main merge window.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is essential, as for the rados block device we'll need
to run in different contexts that would need flags that
are other than GFP_NOFS.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Returning ERR_PTR(-ENOMEM) is useless extra work. Return NULL on failure
instead, and fix up the callers (about half of which were wrong anyway).
Signed-off-by: Sage Weil <sage@newdream.net>
ceph_sb_to_client and ceph_client are really identical, we need to dump
one; while function ceph_client is confusing with "struct ceph_client",
ceph_sb_to_client's definition is more clear; so we'd better switch all
call to ceph_sb_to_client.
-static inline struct ceph_client *ceph_client(struct super_block *sb)
-{
- return sb->s_fs_info;
-}
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Following Nick Piggin patches in btrfs, pagecache pages should be
allocated with __page_cache_alloc, so they obey pagecache memory
policies.
Also, using add_to_page_cache_lru instead of using a private
pagevec where applicable.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Verify the file is actually open for the given caps when we are
waiting for caps. This ensures we will wake up and return EBADF
if another thread closes the file out from under us.
Note that EBADF is also the correct return code from write(2)
when called on a file handle opened for reading (although the
vfs should catch that).
Signed-off-by: Sage Weil <sage@newdream.net>
If a sync read gets a short result from the OSD, it may need to do a
getattr to see if it is short due to reaching end-of-file. The getattr
was being done while holding a reference to FILE_RD, which can lead to
a deadlock if the MDS is revoking that capability bit and can't process
the getattr until it does.
We fix this by setting a flag if EOF size validation is needed, and doing
the getattr in ceph_aio_read, after the RD cap ref is dropped. If the
read needs to be continued, we loop and continue traversing the file.
Signed-off-by: Sage Weil <sage@newdream.net>
In the cases where we either do a sync read or a write, we
need to make sure that everything in the page cache is flushed.
In the case of a sync write we invalidate the relevant pages,
so that subsequent read/write reflects the new data written.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Zeroing of holes was not done correctly: page_off was miscalculated and
zeroing the tail didn't not adjust the 'read' value to include the zeroed
portion.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
The function was broken in the case where there was more than one page
involved, broke the ceph sync_write case.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
File open and close operations, and read and write methods that ensure
we have obtained the proper capabilities from the MDS cluster before
performing IO on a file. We take references on held capabilities for
the duration of the read/write to avoid prematurely releasing them
back to the MDS.
We implement two main paths for read and write: one that is buffered
(and uses generic_aio_{read,write}), and one that is fully synchronous
and blocking (operating either on a __user pointer or, if O_DIRECT,
directly on user pages).
Signed-off-by: Sage Weil <sage@newdream.net>
Yan, Zheng