The navi10_message_map[] array has SMU_MSG_MAX_COUNT elements so the ">"
has to be changed to ">=" to prevent reading one element beyond the end
of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since reservation_object_wait_timeout_rcu is called with
interruptable set to false it's wrong to say
'or interrupted' in the error message.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface. This has caused a problem where status
registers requiring HW to update have a 1 cycle delay, due to the
register update having to go through GRBM.
SW may operate on an incorrect value if they write a register and
immediately check the corresponding status register.
Registers requiring HW to clear or set fields may be delayed by 1 cycle.
For example,
1. write VM_INVALIDATE_ENG0_REQ mask = 5a
2. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
a. HW will reset VM_INVALIDATE_ENG0_ACK = 0 until invalidation is complete
3. write VM_INVALIDATE_ENG0_REQ mask = 5a
4. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
a. First read of VM_INVALIDATE_ENG0_ACK = 5a instead of 0
b. Second read of VM_INVALIDATE_ENG0_ACK = 0 because
the remote GRBM h/w register takes one extra cycle to be cleared
c. In this case, SW will see a false ACK if they exit on first read
Affected registers (only GC variant) | Recommended Dummy Read
--------------------------------------+----------------------------
VM_INVALIDATE_ENG*_ACK | VM_INVALIDATE_ENG*_REQ
VM_L2_STATUS | VM_L2_STATUS
VM_L2_PROTECTION_FAULT_STATUS | VM_L2_PROTECTION_FAULT_STATUS
VM_L2_PROTECTION_FAULT_ADDR_HI/LO32 | VM_L2_PROTECTION_FAULT_ADDR_HI/LO32
VM_L2_IH_LOG_BUSY | VM_L2_IH_LOG_BUSY
MC_VM_L2_PERFCOUNTER_HI/LO | MC_VM_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER_HI/LO | ATC_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER2_HI/LO | ATC_L2_PERFCOUNTER2_HI/LO
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we don't call dma_set_max_seg_size() for i915 because we
intentionally do not limit the segment length that the device supports.
However, this results in a warning being emitted if we try to map
anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG
enabled:
[ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer
than device claims to support [len=98304] [max=65536]
[ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220
debug_dma_map_sg+0x20f/0x340
This was originally brought up on
https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus
there was it wasn't really useful to set a limit (and that dma-debug
isn't really all that useful for i915 in the first place). Unfortunately
though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for
various distro kernels. Since a WARN_ON() will disable automatic problem
reporting (and cause any CI with said option enabled to start
complaining), we really should just fix the problem.
Note that as me and Chris Wilson discussed, the other solution for this
would be to make DMA-API not make such assumptions when a driver hasn't
explicitly set a maximum segment size. But, taking a look at the commit
which originally introduced this behavior, commit 78c47830a5
("dma-debug: check scatterlist segments"), there is an explicit mention
of this assumption and how it applies to devices with no segment size:
Conversely, devices which are less limited than the rather
conservative defaults, or indeed have no limitations at all
(e.g. GPUs with their own internal MMU), should be encouraged to
set appropriate dma_parms, as they may get more efficient DMA
mapping performance out of it.
So unless there's any concerns (I'm open to discussion!), let's just
follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit
to silence any warnings.
Changes since v3:
* Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like
just turning it on causes the kernel to spit out bogus WARN_ONs()
during some igt tests which would otherwise require teaching igt to
disable the various DMA-API debugging options causing this. This is
too much work to be worth it, since DMA-API debugging is useless for
us. So, we'll just settle with this single patch to squelch WARN_ONs()
during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned
on for some reason.
* Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris
Wilson
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patchwork.freedesktop.org/patch/msgid/20190823205251.14298-1-lyude@redhat.com
(cherry picked from commit acd674af95)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use
cpu_transcoder instead of encoder->type to select the correct DSC registers
that was wrongly used in the original patch for one DSC register isntance.
Fixes: 7182414e25 ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling")
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com
(cherry picked from commit d4c61c4a16)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're not allowed to create new properties after device registration
so for MST connectors we need to either create the max_bpc property
earlier, or we reuse one we already have. Let's do the latter apporach
since the corresponding SST connector already has the prop and its
min/max are correct also for the MST connector.
The problem was highlighted by commit 4f5368b554 ("drm/kms:
Catch mode_object lifetime errors") which results in the following
spew:
[ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm]
...
[ 1330.879008] Call Trace:
[ 1330.879023] drm_property_create+0xba/0x180 [drm]
[ 1330.879036] drm_property_create_range+0x15/0x30 [drm]
[ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm]
[ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915]
[ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper]
...
Cc: stable@vger.kernel.org
Cc: Lyude Paul <lyude@redhat.com>
Cc: sunpeng.li@amd.com
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Fixes: 5ca0ef8a56 ("drm/i915: Add max_bpc property for DP MST")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820161657.9658-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit 1b9bd09630)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-next-5.4-2019-08-23:
amdgpu:
- Enable power features on Navi12
- Enable power features on Arcturus
- RAS updates
- Initial Renoir APU support
- Enable power featyres on Renoir
- DC gamma fixes
- DCN2 fixes
- GPU reset support for Picasso
- Misc cleanups and fixes
scheduler:
- Possible race fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823202620.3870-1-alexander.deucher@amd.com
Fix image converter seam handling for 1024x1024 pixel hardware
limitation at the main processing section input, improve error
handling, and slightly optimize for 1:1 conversions.
Add support for newly defined 32-bit RGB V4L2 pixel formats.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXV/+phcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwJk/AP91Z8dTyRq2gaSJqRRYqe+dkyTI
SzfUKMA+nJG5ybRq4wD+MhLdbyq5MUEhg4ZDqvDjFKdXm8dO1YpBh4gkbj++gwA=
=PVTc
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2019-08-23' of git://git.pengutronix.de/pza/linux into drm-next
drm/imx: IPUv3 image converter fixes and improvements
Fix image converter seam handling for 1024x1024 pixel hardware
limitation at the main processing section input, improve error
handling, and slightly optimize for 1:1 conversions.
Add support for newly defined 32-bit RGB V4L2 pixel formats.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1566573659.23587.2.camel@pengutronix.de
- Fixes on DP MST (Ville)
- More GTT and Execlists fixes and improvements (Chris)
- Code style clean-up on hdmi and dp side (Jani)
- Fix null pointer dereferrence (Xiong)
- Fix a couple of missing serialization on selftests (Chris)
- More vm locking rework (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdXo8xAAoJEPpiX2QO6xPKiGcH/RKd+kjlORORlcLFn8YLhjui
5GM/+8TArbFND/8Ld+dTNro/YKGH4yB1Q/XESKZFWrVAGc8l6ikIY8lN8q1oV2lL
k6na3kO5uO4dZt+k7Y/uHOSxzs437pxeqjTkZsYzpjy9fR3ZvrteL5wEWRFbuh9q
JiCoqoPH1VbaaaFOvj/UlKzoEP2bMclzq/oE6B19XcLA51d2vfQ6cfufffw3sj9q
ulx/AMvdCcXTVZ8zIhY4SjaQSCRC6TeMBmWxLfHKCn3AZ4XR2riNRHx4Fylcyyzf
yN/EEIs/AUW5LaC34tZlu57kkc75QRllkDyozox6a6EH3QU7VkFoOIA3deyBMz4=
=bilG
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-08-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- More TGL enabling work (Michel, Jose, Lucas)
- Fixes on DP MST (Ville)
- More GTT and Execlists fixes and improvements (Chris)
- Code style clean-up on hdmi and dp side (Jani)
- Fix null pointer dereferrence (Xiong)
- Fix a couple of missing serialization on selftests (Chris)
- More vm locking rework (Chris)
drm-intel-next-2019-08-20:
- GuC and HuC related fixes and improvements (Daniele, Michal)
- Improve debug with more engine information and rework on debugfs files (Chris, Stuart)
- Simplify appearture address handling (Chris)
- Other fixes and cleanups around engines and execlists (Chris)
- Selftests fixes (Matt, Chris)
- Gen11 cache flush related fixes and improvements (Mika)
- More work around requests, timelines and locks to allow removal of struct_mutex (Chris)
- Add missing CML PCI ID (Anusha)
- More work on the new i915 buddy allocator (Matt)
- More headers, files and directories reorg (Daniele)
- Improvements on ggtt’s get pdp (Mika)
- Fix GPU reset (Chris)
- Fix GPIO pins on gen11 (Matt)
- Fix HW readout for crtc_clock in HDMI mode (Imre)
- Sanitize display Phy during unitit to workaround messages of HW state change during suspend (Imre)
- Be defensive when starting vma activity (Chris)
- More Tiger Lake enabling work (Michel, Daniele, Lucas)
- Relax pd_used assertion (Chris)
drm-intel-next-2019-08-13:
- More Tiger Lake enabling work (Lucas, Jose, Tomasz, Michel, Jordan, Anusha, Vandita)
- More selftest organization reworks, fixes and improvements (Lucas, Chris)
- Simplifications on GEM code like context and cleanup_early (Chris, Daniele)
- GuC and HuC related fixes and improvements (Daniele, Michal, Chris)
- Some clean up and fixes on headers, Makefile, and generated files (Lucas, Jani)
- MOCS setup clean up (Tvrtko)
- More Elkhartlake enabling work (Jose, Matt)
- Fix engine reset by clearing in flight execlists requests (Chris)
- Fix possible memory leak on intel_hdcp_auth_downstream (Wei)
- Introduce intel_gt_runtime_suspend/resume (Daniele)
- PMU improvements (Tvrtko)
- Flush extra hard after writing relocations through the GTT (Chris)
- Documentations fixes (Michal, Chris)
- Report dma_reserv allocation failure (Chris)
- Improvements around shrinker (Chris)
- More improvements around engine handling (Chris)
- Also more s/dev_priv/i915 (Chris)
- Abstract display suspend/resume operations (Rodrigo/Jani)
- Drop VM_IO from GTT mappings (Chris)
- Fix some NULL vs IS_ERR conditions (Dan)
- General improvements on error state (Chris)
- Isolate i915_getparam_iocrtl to its own file (Chris)
- Perf OA object refactor (Umesh)
- Ignore central i915->kernel_context and allocate it directly (Chris)
- More fixes and improvements around wakerefs (Chris)
- Clean-up and improvements around debugfs (Chris)
- Free the imported shmemfs file for phys objects (Chris)
- Many other fix and cleanups around engines and execlists (Chris)
- Split out uncore_mmio_debug (Daniele)
- Memory management fixes for blk and gtt (Matt)
- Introduction of buddy allocator to handle huge-pages for GTT (Matt)
- Fix ICL and TGL PG3 power domains (Anshuman)
- Extract GT IRQ to gt/ (Andi)
- Drop last_fence tracking in favor of whole vma->active (Chris)
- Make overlay to use i915_active instead of i915_active_request (Chris)
- Move misc display IRQ handling to its own function (Jose)
- Introduce new _TRANS2() macro in preparation for some coming PSR related work (Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823051435.GA23885@intel.com
For the 40.46 SMU release, they changed CurrSocketPower to
AverageSocketPower, but this was changed back in 40.47 so just check if
it's 40.46 and make the appropriate change
Tested with 40.45, 40.46 and 40.47 successfully
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU changed reading from CurrSocketPower to AverageSocketPower, so
reflect this accordingly. This fixes the issue where Average Power
Consumption was being reported as 0 from SMU 40.46-onward
v2: Fixed headline prefix
v3: Add check for SMU version for proper compatibility
v4: Style fix
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to grab a reference to the fence we wait for.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hisilicon developed hibmc_drm for their arm64 based soc and did not
intend for this driver to be used on any other architecture than arm64.
Using it on amd64 leads to incorrect video modes being used, making
the screen unreadable, forcing users to manually blacklist the module
on the kernel command line to use the d-i server installer or any
graphical sessions.
Make CONFIG_DRM_HISI_HIBMC firmly depend on ARM64 to ensure it is not
built for other architectures.
Signed-off-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Remove boilerplate code by using macro module_pci_driver.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
mediatek:
- fix build in some cases
nouveau:
- fix hang with i2c and mst docks
-----BEGIN PGP SIGNATURE-----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=4afb
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Although the tree built for me fine on arm here, it appears either
header cleanups in next or some kconfig combo it breaks, so this
contains a fix to mediatek to include dma-mapping.h explicitly.
There was also one nouveau fix that came in late that I was going to
leave until next week, but since I was sending this I thought it may
as well be in here:
mediatek:
- fix build in some cases
nouveau:
- fix hang with i2c and mst docks"
* tag 'drm-fixes-2019-08-24' of git://anongit.freedesktop.org/drm/drm:
drm/mediatek: include dma-mapping header
drm/nouveau: Don't retry infinitely when receiving no data on i2c over AUX
Although it builds fine here in my arm cross compile, it seems
either via some other patches in -next or some Kconfig combination,
this fails to build for everyone.
Include linux/dma-mapping.h should fix it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[WHY] value of dchub_ref_clock is decided by dchubbub global timer
settings which is programmed by vbios command table disp_init.
for multi-GPU case, vbios is posted only for primary GPU. without
vbios posted for the secondary GPU, value of dchub_ref_clock is not
set properly. this value will affect dcn bandwidth calcuation and
cause underflow. user will see screen flicking during driver
installation for dual GPU case.
[HOW] dc init_hw always call vbios command table disp_init to
make sure dchubbub global timer is configured and enable.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The register LVTMA_PWRSEQ_CNTL is used to determine the power state of the
embedded display. Currently we do not actually read this register's values,
so during power down we think that this display is already off, so we skip
calling into VBIOS to actually turn it off.
[How]
- add relevant fields to shift / mask initialization
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Previous workaround to prevent a vsync flip to be converted
to immediate flip is no longer needed, and is risky because
there are cases where it can result in infinite loop.
[how]
Remove wait loop (which is potentially infinite) before locking
pipe
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should be using the ddc_num from res_caps. As the
pipe count != number of i2c resources.
[How]
Use ddc_num from res_cap instead of pipe count.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Existing HW Features, HW Diags test requested that the
registers be exposed.
[How]
Add V_TOTAL_MID to existing DC structures.
Make sure values are passed down throughout DC
Add Register definition.
Program the additional registers
Add additional Logic for V_TOTAL_CONTROL.
Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Calculating DCFCLK DS time requires calculating
delivery time for luma/chroma, but this value is
not calculated in DMLv2, it was inadvertently
removed when porting DMLv2
[how]
Add the calculation back
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM provides drm_dp_mst_dump_topology, which prints
useful information about MST devices
Hook this up to a debugfs file named amdgpu_mst_topology
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
OS will reserve HW state in UEFI mode.
Driver init_hw reset to RGB which caused HDMI green in YCbCr mode.
read HW blank_color based on acc_mode.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A recent bug showed that logging would be useful in debugging
various gamma issues.
[How]
Add logging in dc.
Fix formatting for easier graphing.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] HW rotation is not enabled. Calculations for cursor rotation
are wrong for the values passed to set_cursor_position.
[How] Swap Src rect and height and vertically mirror surface for
the correct surface rotation direction. Cursor position is rotated
according to angle. Offset calculations are tweaked for non-rotated
cursor hotspot and width/height.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to have the ability to to tell us set degamma on the cursor.
[How]
Pass a flag down to register programming that tells us if the
current surface format needs cursor degamma.
Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update bw validation to use prev and next odm pipe pointers
for populating dml inputs.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to memset all odm pipes when calling dc_remove_stream_from_ctx
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn20 requires special casing for odm.
This change treats odm as alternative to mpc tree on dcn20.
This is planned to be fixed in a future refactor
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
num_slices_h was not being checked
[How]
Fix the typo and check num_slices_h
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ODM next and prev pipe were missing from dc_copy_state
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In newer hardware MANUAL_FLOW_CONTROL is not a trigger bit. Due to this
front porch is fixed and in these hardware freesync does not work.
[How]
Change the programming to generate a pulse so that the event will be
triggered, front porch will be cut short and freesync will work.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With visual confirm enabled, displays where ODM combine is enabled
has a test pattern stuck on the right half of the display even
though the display is unblanked.
[how]
Add a condition to not show the colour ramp test pattern when the
display is unblanked.
Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Video Timing Extended Metadata packet (VTEM) is not
specific to freesync. So move it out of freesync module
[How]
- Moved VTEM from freesync module to info_packet module
- Created new structure for VTEM parameters that can be used for VRR
and FVA
Signed-off-by: Ahmad Othman <ahmad.othman@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Ahmad Othman <Ahmad.Othman@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This function is not being used, it was left in
when introducing DCN2
[How]
Remove the function
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
during a refactor a redundant code that has unknown behaviour was added.
[how]
removed old bad code
Fixes: 8a31820b12 ("drm/amd/display: Make init_hw and init_pipes generic for seamless boot")
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How] Allocate memory for default page and program memory block addr
into default page addr register.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IEEE OUI will now be used while referring to certain vendors.
instead of normal index
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Before a statically allocated PPS data structure, that did
get zeroed-out at startup, had been re-used for making packed PPS
SDP. With S3 fix, using a non-initialized PPS data structure was
introduced, while wrongly assuming it'd get initialized before it's
populated. As a consequence 'vbr_enable' and perhaps some other
fields are left uninitialized when making packed PPS SDP. This can
affect 'simple_422' as well because of the way PPS SDP packing is
done (the fields are not masked first, only shifted). The behavior
will be different, depending on the content of uninitialized data.
[how]
Zero-out PPS data structure at initialization time before it's
populated
Fixes: 1a9e3d4569 ("drm/amd/display: Set DSC before DIG front-end is connected to its back-end")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new function to get the voltage at the end of
dcn_validate_bandwidth, to check against the
highest voltage we allow.
Created a stub to allow for optimizations
Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Sun peng Li <Sunpeng.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding NULL checks to various parameters in log_tf, to avoid
nullptr errors
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Nikola Cornij <Nikola.Cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the writeback Hratio and Vratio in dml.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous odm change broke stream enable by always setting
n_multiply as if odm was on.
This fixes the check for odm by making sure opp count is >1
rather than not 0.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABM 2.3 firmware expects information in iRAM that differs from previous
versions of ABM, so a mechanism is required to provide it with that
information.
[How]
Extend the existing iRAM definition to include parameters added by
ABM 2.3, and load it if DMCU is running ABM 2.3.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With Scatter Gather enabled, HUBP underflows during MPO enabled video
playback. hubp_init has a register write that fixes this problem, but
the register is cleared when HUBP gets power gated.
[how]
Make a call to hubp_init during enable_plane, so that the fix can
be applied after HUBP powers back on again.
Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disable_audio_stream gets enum option as a paramenter which will decide
if we free acquired resources or not. However checks for the option is
guarded by the other condition which check if audio stream is getting
diabled more than once. With both conditions combined, if we attempt to
disable audio stream twice in a row, first with keep and second with
free as an option, we will never free any resources, which will make
system think there is audio endpoint connected even after we plug out
the device
[How]
Get rid of option as parameter to disable_audio_stream and move the part
of the code that free acquired resources to outside where to keep or to
free resources is actually determined
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dig_encoder_sel_to_atom will always return zero on any ASIC version
past DCE80 since programming of the FE selection is handled by
driver, but the translation code was left in the function, making
it look like a coding error.
[How]
Remove code that has no effect, and replace with a comment describing
why it returns zero.
Signed-off-by: Julian Parkin <julian.parkin@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently odm is handled using top_bottom pipe by special casing
the differing opps to differentiate from mpc combine.
Since top/bottom pipe list was made to track mpc muxing this creates
difficulties in adding a 4 pipe odm case support.
Rather than continue using mpc combine list, this change reworks odm
to use it's own linked list to keep track of odm combine pipes. This
also opens up options for using mpo with odm, if a practical use case
is ever found.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we properly handle them on older asics.
Fixes: 3ff985485b ("drm/amdgpu: Export function to flush TLB of specific vm hub")
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a dcfeaturemask flag for mclk switching. Disable by default;
enable once the feature has seen more testing.
Set amdgpu.dcfeaturemask=2 on the kernel command line in grub
to enable this.
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Properly set all_displays_in_sync so that when the data is
propagated to powerplay, it's set properly and we can enable
mclk switching when all monitors are in sync.
v2: fix logic, clean up
v3: check for blending chains, simplify logic
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If DC has synced the displays, we can enable mclk switching to
save power.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If DC has synced the displays, we can enable mclk switching to
save power.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the 40.46 SMU release, they changed CurrSocketPower to
AverageSocketPower, but this was changed back in 40.47 so just check if
it's 40.46 and make the appropriate change
Tested with 40.45, 40.46 and 40.47 successfully
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the virtual function PCI device id.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix other navi asic set peak performance level error.
because the navi10_ppt.c will handle navi12 14 asic,
it will use navi10 peak value to set other asic, it is not correct.
after patch:
only navi10 use custom peak value, other asic will used default value.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use unsigned long type for the same ras count variable.
This will avoid overflow on 64 bit system.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rcar-du:
- LVDS dual-link mode fix
mediatek:
- of node refcount fix
- prime buffer import fix
- dma max seg fix
komeda:
- output polling fix
- abfc format fix
- memory-region DT fix
amdgpu:
- bpc display fix
- ioctl memory leak fix
- gfxoff fix
- smu warnings fix
i915:
- HDMI mode readout fix
-----BEGIN PGP SIGNATURE-----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=eo32
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-08-23' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Live from the laundromat after my washing machine broke down, we have
the 5.3-rc6 fixes. Changelog is in the tag below, but nothing too
noteworthy in here:
rcar-du:
- LVDS dual-link mode fix
mediatek:
- of node refcount fix
- prime buffer import fix
- dma max seg fix
komeda:
- output polling fix
- abfc format fix
- memory-region DT fix
amdgpu:
- bpc display fix
- ioctl memory leak fix
- gfxoff fix
- smu warnings fix
i915:
- HDMI mode readout fix"
* tag 'drm-fixes-2019-08-23' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/powerplay: silence a warning in smu_v11_0_setup_pptable
drm/amd/display: Calculate bpc based on max_requested_bpc
drm/amdgpu: prevent memory leaks in AMDGPU_CS ioctl
drm/amd/amdgpu: disable MMHUB PG for navi10
drm/amd/powerplay: remove duplicate macro smu_get_uclk_dpm_states in amdgpu_smu.h
drm/amd/powerplay: fix variable type errors in smu_v11_0_setup_pptable
drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible
drm/i915: Fix HW readout for crtc_clock in HDMI mode
drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto
drm: rcar_lvds: Fix dual link mode operations
drm/mediatek: set DMA max segment size
drm/mediatek: use correct device to import PRIME buffers
drm/omap: ensure we have a valid dma_mask
drm/komeda: Add support for 'memory-region' DT node property
drm/komeda: Adds internal bpp computing for arm afbc only format YU08 YU10
drm/komeda: Initialize and enable output polling on Komeda
komeda/komeda_pipeline.c: In function 'komeda_component_add':
komeda/komeda_pipeline.c:212:3: warning: function 'komeda_component_add' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
vsnprintf(c->name, sizeof(c->name), name_fmt, args);
^~~~~~~~~
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813110759.10425-1-james.qian.wang@arm.com
Fixed two -Wunused-but-set-variable warnings:
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_crtc_normalize_zpos’:
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:150:26: warning: variable ‘fb’ set but not used [-Wunused-but-set-variable]
struct drm_framebuffer *fb;
^~
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_kms_check’:
/arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:209:25: warning: variable ‘old_crtc_st’ set but not used [-Wunused-but-set-variable]
struct drm_crtc_state *old_crtc_st, *new_crtc_st;
^~~~~~~~~~~
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812112322.15990-1-james.qian.wang@arm.com
The patch 5d51f6c0da1b: "drm/komeda: Add writeback support" from May
23, 2019, leads to the following static checker warning:
drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c:151 komeda_wb_connector_add()
error: not allocating enough data 1592 vs 1584
This is a typo which misuse "wb_conn" but which should be "kwb_conn" to
allocate the memory.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819080136.10190-1-james.qian.wang@arm.com
We must make sure our scatterlist segments are not too big, otherwise
we might see swiotlb failures (happens with sev, also reproducable with
swiotlb=force).
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190821111210.27165-1-kraxel@redhat.com
When refactoring port lookup for DSS outputs, commit d17eb4537a
("drm/omap: Factor out common init/cleanup code for output devices")
incorrectly hardcoded usage of DT port 0. This breaks operation for SDI
(which uses the DT port 1) and DPI outputs other than DPI0 (which are
not used in mainline DT sources).
Fix this by using the port number from the output omap_dss_device
of_ports field.
Fixes: d17eb4537a ("drm/omap: Factor out common init/cleanup code for output devices")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821183226.13784-1-laurent.pinchart@ideasonboard.com
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613115749.GC26335@kroah.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704023557.4551-1-huangfq.daxian@gmail.com
qxl has two modes: "native" (used by the drm driver) and "vga" (vga
compatibility mode, typically used for boot display and firmware
framebuffers).
Accessing any vga ioport will switch the qxl device into vga mode.
The qxl driver never does that, but other drivers accessing vga ports
can trigger that too and therefore disturb qxl operation. So aquire
the legacy vga ioports from vgaarb to avoid that.
Reproducer: Boot kvm guest with both qxl and i915 vgpu, with qxl being
first in pci scan order.
v2: Skip this for secondary qxl cards which don't have vga mode in the
first place (Frediano).
Cc: Frediano Ziglio <fziglio@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190805105401.29874-1-kraxel@redhat.com
Some, mostly Fermi, vbioses appear to have zero max voltage. That causes Nouveau to not parse voltage entries, thus users not being able to set higher clocks.
When changing this value Nvidia driver still appeared to ignore it, and I wasn't able to find out why, thus the code is ignoring the value if it is zero.
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is something that got noticed a while ago back when I was fixing a
large number of runtime PM related issues in nouveau, but never got
fixed:
https://patchwork.freedesktop.org/series/46815/#rev7
It's not safe to iterate the entire list of CRTCs in
nv50_disp_atomic_commit(), as we could be doing a non-blocking modeset
on one CRTC in parallel with one or more other CRTCs. Likewise, this
means it's also not safe to do so in order to track runtime PM state.
While this code is certainly wrong, so far the only issues I've seen
this cause in the wild is the occasional PM ref unbalance after an
atomic check failure + module reloading (since the PCI device will
outlive nouveau in such scenarios).
So, do this far more elegantly: grab a runtime PM ref across the modeset
and commit tail, then grab/put references for each CRTC enable/disable.
This also ends up being much simpler then the previous broken solution
we had.
Finally, since we've removed all it's users: get rid of
nouveau_drm->have_disp_power_ref.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Originally when trying to fix the issue of runtime PM references with
non-blocking CRTCs on nv50, I ended up stumbling on this code when
trying to remove nouveau_drm->have_disp_power_ref, and attempted to fix
it to remove the dependency on have_disp_power_ref. However, Ilia Mirkin
pointed out that this code is actually completely useless, as pre-nv50
never had runtime PM support in the first place! Go figure.
So, since it's useless just get rid of it. Note that since the only
thing nouveau_crtc_set_config() was doing was grabbing a runtime PM ref,
calling drm_crtc_helper_set_config() then dropping the ref; we can just
remove the function entirely and just call drm_crtc_helper_set_config()
directly.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Added GPIO is "Power Alert". It's uncertain if this
GPIO is set on GPU initialization or only if a change is detected by the
GPU at runtime.
This GPIO can be found on Tesla and sometimes on Fermi GPUs.
Untested, wrote according to documentation.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Added GPIO is "Thermal and External Power Detect". It's uncertain if this
GPIO is set on GPU initialization or only if a change is detected by the
GPU at runtime.
This GPIO can be found in Rankine and Curie and rarely on Tesla GPUs
VBIOS.
Untested, wrote according to documentation.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, nouveau doesn't check if GPU is missing power. This
patch makes nouveau fail when this happens on latest GPUs.
It checks GPIO function 121 (External Power Emergency), which
should detect power problems on GPU initialization.
This can be disabled with nouveau.config=NvPowerChecks=1
Tested on TU104, GP106 and GF100.
v3:
* Add config override for disabling power checks
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
One gpio was in wrong place, moved it for better readability.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's already a condition in place which attempts to detect this, but
since we've begun to require a PMU subdev even on boards where we don't
load a custom FW, it's become inaccurate.
This will prevent unnecessarily running a periodic fan update thread on
GP100 and newer, where we don't yet override the default PMU FW.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Has a nice side-effect that we only update HW for this when it changes now,
rather than every time we do a page flip.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
zpos normalisation uses plane id to determine ordering for duplicate zpos
values, and we likely want to keep primary plane on the bottom here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We have some of this open-coded already, use the helper to prevent problems
when adding (for example) support for the alpha property.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For GF119:GV100, we can enable DEGAMMA/CTM/GAMMA. For earlier GPUs, as
there is no CTM, having both degamma and gamma is a bit pointless. Later
GPUs currently lack an implementation.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The overlay logic can only do colorkey-based selection, not
alpha-blending.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pascal was particularly incorrect, as the register changed to be more in the
same format as the MMU fault buffers are.
Shouldn't have impacted much more than confusing MMU fault log messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Would like to be able to reuse gf100_fifo_intr_fault() for (some of) the
later chipsets too, as it's identical.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signal that the reset sequence has completed.
This opcode signals that the software reset sequence has completed.
Ordinarily, no actual operations are performed by the opcode.
However it allows for possible software work arounds by devinit
engines in software agents other than the VBIOS, such as the resman,
FCODE, and EFI driver.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signal that the reset sequence has begun.
This opcode signals that the software reset sequence has begun.
Ordinarily, no actual operations are performed by the opcode.
However it allows for possible software work arounds by devinit
engines in software agents other than the VBIOS, such as the resman,
FCODE, and EFI driver.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Absence of a TMDS Info Table is common on Optimus setups where the NVIDIA
gpu is not connected directly to any outputs.
Reporting an error in this scenario is too harsh. Accordingly, change the
error message to an info message.
By default the error message also causes a boot flicker for these sytems.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We now have per-device driver_features, so let's use that
to disable atomic only for pre-nv50.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Older hardware seems to want 0..1024 values, while new hardware takes
0..1 values. We set the gain to 1024 for the earlier display classes.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On Turing, an input LUT is required to transform inputs in fixed-point
formats to FP16 for the internal display pipe. We provide an identity
mapping whenever a window is enabled for this reason.
HW has error checks to ensure when the input is already FP16, that the
input LUT is also disabled.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace the following form:
sizeof(*kind) + sizeof(*kind->data) * mmu->kind_nr;
with:
struct_size(kind, data, mmu->kind_nr)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Drop use of the deprecated drmP.h file from drm/nouveau.
Build tested using allyesconfig and allmodconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Drop include of the deprecated drmP.h from all nouveau heder files.
This allows us to remove drmP.h from all .c files without any
side-effects in a follow-up commit.
Build tested using allyeyconfig and allmodconfig
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Drop the deprecated drmP.h header from nouveau_drv.h.
Fix fallout in other parts of the driver.
Build tested using allmodconfig and allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The DRM_UDELAY is a simple wrapper for udealy() and to be consistent
call udelay() direct like in may other places.
This avoids the need to pull in drm_os_linux.h when we later
drop drmP.h uses in nouveau.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There is a spelling mistake in a warning message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fix sparse warning:
drivers/gpu/drm/nouveau/nvkm/subdev/secboot/acr_r352.c:1092:1:
warning: symbol 'acr_r352_ls_gpccs_func' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
While I had thought I had fixed this issue in:
commit 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")
It turns out that while I did fix the error messages I was seeing on my
P50 when trying to access i2c busses with the GPU in runtime suspend, I
accidentally had missed one important detail that was mentioned on the
bug report this commit was supposed to fix: that the CPU would only lock
up when trying to access i2c busses _on connected devices_ _while the
GPU is not in runtime suspend_. Whoops. That definitely explains why I
was not able to get my machine to hang with i2c bus interactions until
now, as plugging my P50 into it's dock with an HDMI monitor connected
allowed me to finally reproduce this locally.
Now that I have managed to reproduce this issue properly, it looks like
the problem is much simpler then it looks. It turns out that some
connected devices, such as MST laptop docks, will actually ACK i2c reads
even if no data was actually read:
[ 275.063043] nouveau 0000:01:00.0: i2c: aux 000a: 1: 0000004c 1
[ 275.063447] nouveau 0000:01:00.0: i2c: aux 000a: 00 01101000 10040000
[ 275.063759] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000001
[ 275.064024] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000
[ 275.064285] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000
[ 275.064594] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000
Because we don't handle the situation of i2c ack without any data, we
end up entering an infinite loop in nvkm_i2c_aux_i2c_xfer() since the
value of cnt always remains at 0. This finally properly explains how
this could result in a CPU hang like the ones observed in the
aforementioned commit.
So, fix this by retrying transactions if no data is written or received,
and give up and fail the transaction if we continue to not write or
receive any data after 32 retries.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- dma fix for omap.
- Make output polling work on komeda.
- Fix bpp computing for AFBC formats in komeda.
- Support the memory-region property in komeda.
-----BEGIN PGP SIGNATURE-----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=IG8M
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-08-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v5.3-rc6:
- dma fix for omap.
- Make output polling work on komeda.
- Fix bpp computing for AFBC formats in komeda.
- Support the memory-region property in komeda.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f1fdfe3-814e-fad1-663c-7279217fc085@linux.intel.com
This was broken by a previous change switching to cached fw_info.
Fixed by inverting a valid bool check.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111432
Fixes: 9adc8050bf ("drm/amd/display: make firmware info only load once during dc_bios create")
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will enable indirect SRAM loading for VCN DPG mode initialization.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 444a0fea51.
We are ready to enable it now.
Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates gc/sdma goldensetting for renoir
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid the dpm frequence range get failed when DPM enabled and it
will be enabled later once handle well the feature bit map struct.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable the dpm feature for the renoir.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable SDMA PG flag during device ip early init.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for SDMA clockgating on RN.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DF clock gating during DF IP early init.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable athub MG and LS clock gating.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable IH clock gating during IH block initialized.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds add DPMCLOCKS table implementation
Rename smu_populate_smc_pptable to smu_populate_smc_tables
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize smu tables for renoir:
WATERMARKS/DPMCLOCKS/SMU_METRICS
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add and map smu tables for renoir
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check whether the message mapping is valid
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For renoir, it should use mmSMUIO_GFX_MISC_CNTL to check
gfxoff status. For the first time to enter gfxoff status,
it maybe takes about one second more. So just set the max
timeout to 5s.
GFXOFF_STATUS(bits 2:1)'s description is below:
0=GFXOFF(default).
1=Transition out of GFX State.
2=Not in GFXOFF.
3=Transition into GFXOFF.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates gfxoff feature.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add set_gfx_cgpg implement
v2: check if using sw_smu (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This interface support SMU_MSG_GetDriverIfVersion
and SMU_MSG_GetSmuVersion checking.
v2: squash in driver_if changes (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All apu series need powerup sdma and vcn via smu messages.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thus VCN can be powered up for normal operations
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir DPM is not functional so far, we skip it for the comment.
Will revert this patch once SMU 12 is functional.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Implement PowerUpSDMA/PowerDownSDMA interfaces in the swSMU for renoir
2.adjust smu ip block ahead of gfx&sdma ip block
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds smu12_driver_if.h
v2: squash in updates (Alex)
v3: more updates (Alex)
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the pointer init_data is dereferenced on the assignment
of fw_info before init_data is sanity checked to see if it is null.
Fix te potential null pointer dereference on init_data by only
performing dereference after it is null checked.
Addresses-Coverity: ("Dereference before null check")
Fixes: 9adc8050bf ("drm/amd/display: make firmware info only load once during dc_bios create")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variable baco_state is initialized to a value that is never read and it is
re-assigned later. The initialization is redundant and can be removed.
Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix sparse warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device_queue_manager.c:1846:6:
warning: symbol 'deallocate_hiq_sdma_mqd' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: set num_types based on num_instances
navi1x has 2 sdma engines but commit
"e7b58d03b678 drm/amdgpu: reorganize sdma v4 code to support more instances"
changes the max number of sdma irq types (AMDGPU_SDMA_IRQ_LAST) from 2 to 8
which causes amdgpu_irq_gpu_reset_resume_helper() to recover irq of sdma
engines with following logic:
(enable irq for sdma0) * 1 time
(enable irq for sdma1) * 1 time
(disable irq for sdma1) * 6 times
as a result, after gpu reset, interrupt for sdma1 is lost.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In create_stream_for_sink, check for SST DP connectors
Parse DSC caps to DC format, then, if DSC is supported,
compute the config
DSC hardware will be programmed by dc_commit_state
Tested-by: Mikita Lipski <Mikita.Lipski@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 80e80ec817.
This commit fixed an issue with underscan commits not updating all
needed timing values, but through various refactors it is no longer
necessary. It causes corruption on odm combine by
overwriting the halved h_active in the stream timing
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 6c5be4ac63.
This commit was accidentally promoted twice
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit ec8763486d.
Re-enable enc2_dp_set_dsc_config. This function caused warnings
due to missing register definitions. With the registers added,
this now works
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9e14d4f17e.
optc dsc config was causing warnings due to missing register
definitions. With the registers restored, the function can
be re-enabled
The reverted commit also disabled sanity checks and dsc
power gating. The sanity check warnings are not associated
with dsc, and power gating on dsc still has an issue on
non-dsc monitors where the dsc hardware block is never init
and so cannot respond to power gating requests. Therefore,
those are left as is
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to grab a reference to the fence we wait for.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU changed reading from CurrSocketPower to AverageSocketPower, so
reflect this accordingly. This fixes the issue where Average Power
Consumption was being reported as 0 from SMU 40.46-onward
v2: Fixed headline prefix
v3: Add check for SMU version for proper compatibility
v4: Style fix
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
arcturus for sriov would use the unified mc base address
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since agp is not used for sriov, just disable it
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hi Linus,
Please, pull the following patches that mark switch cases where we are
expecting to fall through.
- Fix fall-through warnings on arm and mips for multiple
configurations.
Thanks
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
-----BEGIN PGP SIGNATURE-----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=fQZm
-----END PGP SIGNATURE-----
Merge tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull more fallthrough fixes from Gustavo A. R. Silva:
"Fix fall-through warnings on arm and mips for multiple configurations"
* tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
video: fbdev: acornfb: Mark expected switch fall-through
scsi: libsas: sas_discover: Mark expected switch fall-through
MIPS: Octeon: Mark expected switch fall-through
power: supply: ab8500_charger: Mark expected switch fall-through
watchdog: wdt285: Mark expected switch fall-through
mtd: sa1100: Mark expected switch fall-through
drm/sun4i: tcon: Mark expected switch fall-through
drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through
ARM: riscpc: Mark expected switch fall-through
dmaengine: fsldma: Mark expected switch fall-through
This patch introduce new enum which contains all VPU family (GXBB,
GXL, GXM and G12A).
This enum is used to detect the VPU compatible with the device.
We only need to set .data to the corresponding enum in the device
table, no need to check .compatible string anymore.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87imqpz21w.fsf@masson.i-did-not-set--mail-host-address--so-tickle-me
I think gcc is confused as I don't see how size could be used
uninitialized, but go ahead and silence the warning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
You have to cut it off at the neck, otherwise it just reappears in the
next merge, like it did in commit 3f866026f0ce ("Merge drm/drm-next
into drm-intel-next-queued")
References: 3f866026f0ce ("Merge drm/drm-next into drm-intel-next-queued")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822065917.18988-1-chris@chris-wilson.co.uk
Avoid calling i915_vma_put_fence() by using our alternate paths that
bind a secondary vma avoiding the original fenced vma. For the few
instances where we need to release the fence (i.e. on binding when the
GGTT range becomes invalid), replace the put_fence with a revoke_fence.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822061557.18402-1-chris@chris-wilson.co.uk
Since we want to revoke the ggtt vma from only under the ggtt->mutex, we
need to move protection of the userfault tracking from the struct_mutex
to the ggtt->mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-2-chris@chris-wilson.co.uk
We can reduce the locking for fence registers from the dev->struct_mutex
to a local mutex. We could introduce a mutex for the sole purpose of
tracking the fence acquisition, except there is a little bit of overlap
with the fault tracking, so use the i915_ggtt.mutex as it covers both.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822060914.2671-1-chris@chris-wilson.co.uk
We need the rename of reservation_object to dma_resv.
The solution on this merge came from linux-next:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 14 Aug 2019 12:48:39 +1000
Subject: [PATCH] drm: fix up fallout from "dma-buf: rename reservation_object to dma_resv"
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/gpu/drm/i915/gt/intel_engine_pool.c | 8 ++++----
3 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pool.c b/drivers/gpu/drm/i915/gt/intel_engine_pool.c
index 03d90b49584a..4cd54c569911 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_pool.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_pool.c
@@ -43,12 +43,12 @@ static int pool_active(struct i915_active *ref)
{
struct intel_engine_pool_node *node =
container_of(ref, typeof(*node), active);
- struct reservation_object *resv = node->obj->base.resv;
+ struct dma_resv *resv = node->obj->base.resv;
int err;
- if (reservation_object_trylock(resv)) {
- reservation_object_add_excl_fence(resv, NULL);
- reservation_object_unlock(resv);
+ if (dma_resv_trylock(resv)) {
+ dma_resv_add_excl_fence(resv, NULL);
+ dma_resv_unlock(resv);
}
err = i915_gem_object_pin_pages(node->obj);
which is a simplified version from a previous one which had:
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most importantly per-process address spaces on GPUs that are capable of
providing proper isolation has finished baking. This is the base for
our softpin implementation, which allows us to support the texture
descriptor buffers used by GC7000 series GPUs without a major UAPI
extension/rework.
Shortlog of notable changes:
- code cleanup from Fabio
- fix performance counters on GC880 and GC2000 GPUs from Christian
- drmP.h header removal from Sam
- per process address space support on MMUv2 GPUs from me
- softpin support from me
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1565946875.2641.73.camel@pengutronix.de
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c: In function restore_process_worker:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:949:29: warning:
variable pdd set but not used [-Wunused-but-set-variable]
It is not used since
commit 5b87245faf ("drm/amdkfd: Simplify kfd2kgd interface")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/nv.c: In function 'nv_common_early_init':
drivers/gpu/drm/amd/amdgpu/nv.c:471:7: warning:
variable 'psp_enabled' set but not used [-Wunused-but-set-variable]
It's not used since inroduction in
commit c6b6a42175 ("drm/amdgpu: add navi10 common ip block (v3)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When building arm32 allyesconfig:
ld.lld: error: undefined symbol: __aeabi_uldivmod
>>> referenced by dc_link.c
>>> gpu/drm/amd/display/dc/core/dc_link.o:(wait_for_alt_mode) in archive drivers/built-in.a
>>> referenced by dc_link.c
>>> gpu/drm/amd/display/dc/core/dc_link.o:(wait_for_alt_mode) in archive drivers/built-in.a
time_taken_in_ns is of type unsigned long long so we need to use div_u64
to avoid this error.
Fixes: b5b1f45549 ("drm/amd/display: Enable type C hotplug")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error out if the AMDGPU_CS ioctl is called with multiple SYNCOBJ_OUT and/or
TIMELINE_SIGNAL chunks, since otherwise the last chunk wins while the
allocated array as well as the reference counts of sync objects are leaked.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to ensure that we're holding the lock on the CRTC when setting
the CRC source since we're modifying the CRTC state directly.
We also need to wait for any outstanding non-blocking commits to finish
so they aren't reading state that's potentially being modified -
non-blocking commits don't hold the CRTC lock while doing commit tail
work.
[How]
Lock the CRTC using its mutex. While holding the lock check if there's
any commit active on the CRTC - if there is, it's non-blocking and
we should wait until it's finished by waiting for hw_done to be
signaled since that's the last point where we touch CRTC state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Calling amdgpu_dm_crtc_set_crc_source in amdgpu_dm directly has the
consequence of adding additional vblank references or starting DPRX
CRC capture more than once without calling stop first.
Vblank references for CRC capture should be managed entirely by opening
and closing the CRC file from userspace.
Stream state also shouldn't be required on the CRC so we can close the
file after the CRTC has been disabled.
[How]
Do DC programming required for configuring CRC capture separately from
setting the source. Whenever we re-enable or reset a CRC this
programming should be reapplied.
CRC vblank reference handling in amdgpu_dm can be entirely dropped after
this.
Stream state also no longer needs to be required since we can just defer
the programming to when the stream is actually enabled.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change is a refactor in preparation for adding locking and removing
the requirement for a stream state on the CRTC for enabling CRC capture
to fix igt@kms_plane_multiple@* warnings.
[How]
We can get the aux by finding the matching connector for the CRTC
with the assumption that we're not doing cloning.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The call to drm_crtc_vblank_get can fail if vblank is disabled and
we try to increment the reference.
Since drm_crtc_vblank_get internally drops the reference when it fails
it means the subsequent drm_crtc_vblank_put(...) when closing the file
drops a zero reference.
This was found via igt@kms_plane@pixel-format-pipe-A-planes.
[How]
Check the return code and return it on failure.
We wouldn't have been able to enable CRC reading anyway since vblank
wasn't enabled.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable MMHUB PG for navi10 according to the production requirement.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"COMPUTE" was wrongly spelled as "CUSTOM".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problems with current settings:
1. The min value was overrided to 0 on Vega20 & Navi10. While
the expected should be -273.15 C.
2. The thermal min/max threshold was output in wrong unit on
Navi10 & Arcturus. As TEMP_RANGE_MIN/MAX is already in
millicelsius. And "*1000" in smu_v11_0_start_thermal_control
makes the output wrongly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On fclk dpm disabled, the default dpm table will be setup with only one
level and clock frequency as bootup value.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is available with firmwareinfo table v3.2 or later.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not expose those unsupported clock domains through sysfs on
Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update smc fw and driver interface header.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix size type errors, from uint32_t to uint16_t.
it will cause only initializes the highest 16 bits in
smu_get_atom_data_table function.
bug report:
This fixes the following static checker warning.
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:390 smu_v11_0_setup_pptable()
warn: passing casted pointer '&size' to 'smu_get_atom_data_table()' 32 vs 16.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the bellow patch refine the sensor read sequence,
but missed to add arcuturs support. (arcuturs_ppt.c)
it will cause some sensor is not supported in arcturus.
drm/amd/powerplay: change smu_read_sensor sequence in smu
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'_navi10_ip_offset_HEADER' is already used in 'navi10_ip_offset.h', so use
'_navi12_ip_offset_HEADER' instead here.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
so that more visible vram can be available for umd.
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The name field in node topology has not been used. We re-purpose it to
hold the asic name, which can be queried by user space applications
through sysfs.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is to improve performance.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
firmware header information is printed for direct fw loading but not
added for psp fw loading yet
v2: squash in warning fix (Alex)
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/r list in rlc firmware is ready, so remove the special autoload handling
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The only place where state->max_bpc is updated on the connector is
at the start of atomic check during drm_atomic_connector_check. It
isn't updated when adding the connectors to the atomic state after
the fact. It also doesn't necessarily reflect the right value when
called in amdgpu during mode validation outside of atomic check.
This can cause the wrong bpc to be used even if the max_requested_bpc
is the correct value.
[How]
Don't rely on state->max_bpc reflecting the real bpc value and just
do the min(...) based on display info bpc and max_requested_bpc.
Fixes: 01933ba42d ("drm/amd/display: Use current connector state if NULL when checking bpc")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to set certain power gating flags after we determine
if the firmware version is sufficient to support gfxoff.
Previously we set the pg flags in early init, but we later
we might have disabled gfxoff if the firmware versions didn't
support it. Move adding the additional pg flags after we
determine whether or not to support gfxoff.
Fixes: 005440066f ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
From rdma.git
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies, and is being taken
into hmm.git due to dependencies in the next patches.
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
[Why]
The only place where state->max_bpc is updated on the connector is
at the start of atomic check during drm_atomic_connector_check. It
isn't updated when adding the connectors to the atomic state after
the fact. It also doesn't necessarily reflect the right value when
called in amdgpu during mode validation outside of atomic check.
This can cause the wrong bpc to be used even if the max_requested_bpc
is the correct value.
[How]
Don't rely on state->max_bpc reflecting the real bpc value and just
do the min(...) based on display info bpc and max_requested_bpc.
Fixes: 01933ba42d ("drm/amd/display: Use current connector state if NULL when checking bpc")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error out if the AMDGPU_CS ioctl is called with multiple SYNCOBJ_OUT and/or
TIMELINE_SIGNAL chunks, since otherwise the last chunk wins while the
allocated array as well as the reference counts of sync objects are leaked.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable MMHUB PG for navi10 according to the production requirement.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix size type errors, from uint32_t to uint16_t.
it will cause only initializes the highest 16 bits in
smu_get_atom_data_table function.
bug report:
This fixes the following static checker warning.
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:390 smu_v11_0_setup_pptable()
warn: passing casted pointer '&size' to 'smu_get_atom_data_table()' 32 vs 16.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to set certain power gating flags after we determine
if the firmware version is sufficient to support gfxoff.
Previously we set the pg flags in early init, but we later
we might have disabled gfxoff if the firmware versions didn't
support it. Move adding the additional pg flags after we
determine whether or not to support gfxoff.
Fixes: 005440066f ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
In commit 70d6894d14 ("drm/i915: Serialize against vma moves")
I managed to miss a couple of i915_vma_move_to_active() that had not
serialised against an async vma pinning. Add the missing
i915_request_await.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821193851.18232-1-chris@chris-wilson.co.uk
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames ade_data to
kirin_drm_private, and moves crtc_init and plane_init to
kirin drm drv too. Now that they are generic the functions
can be shared between the kirin620 and (to be added later)
kirin960 specific support code.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-26-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the code
via a passed in driver_data pointer, rather than hardcoding
them via ade_driver_data variable.
This will allow those funcitons to be later moved to the
generic kirin_drm_drv.c using alternative driver_data structures
that support other hardware.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-25-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the
alloc/clean_hw_ctx functions to be called via driver_data
specific funciton pointers.
This will allow the ade_drm_init to later be made generic and
moved to kirin_drm_drv.c
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-24-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the driver_data
value to not be a global variable. Instead the driver_data value
is accessed via the of_device_get_match_data() when needed.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-23-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the
dev->driver_data to point to a drm_device, not ade_data.
Thus we set the driver data to drm device after alloc.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-22-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames
ade_crtc/plane_init kirin_plane/crtc_init, as they will later be
moved to kirin drm drv and shared with the kirin960 hardware
support.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-21-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch adds a flag to the
device specific driver data so that we can conditionally
register the connectors at init.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-20-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the drm_driver
structure to be under device specific driver data.
This will allow us to more easily add support for kirin960
hardware with later patches.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-19-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the max_width
and max_height values used in kirin_drm_mode_config_inita to
hardware specific driver data.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-18-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the number of
planes and the primary plane value to the kirin_drm_data
structure
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-17-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the mode config
initialization values into the kirin_drm_data structure.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-16-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the channel
format arrays into the kirin_drm_data structure.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-15-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the crtc
and plane funcs/helper_funcs to the struct kirin_drm_data.
This will make it easier to add support for new devices
via a new kirin_drm_data structure.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-14-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames the
struct kirin_dc_ops to struct kirin_drm_data and cleans
up the related variable names.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-13-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves some shared
structures and helpers to the common kirin_drm_drv.h
These structures will later used by both kirin620 and
future kirin960 driver
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-12-john.stultz@linaro.org
The workqueue used to reset the display when we hit an LDI
underflow error is ADE specific, so since this patch series
works to make the kirin_crtc structure more generic, move the
workqueue to the ade_hw_ctx structure instead.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-11-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch modifies the
initialization routines so the devm_request_irq() function
is called as part of the allocation function.
This will be needed in the future when we will have different
allocation functions to allocate hardware specific hw_ctx
structures, which will setup the vblank irq differently.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-10-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch modifies the
initialization function to dynamically allocate the ade_hw_ctx
structure previously kept as part of struct ade_data.
This is done so that later we can have the hw_ctx point to
hardware revision specific ctx structures.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-9-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames the
struct ade_crtc to kirin_crtc.
The struct kirin_crtc will later used by both kirin620 and
future kirin960 driver, and will be moved to a common
kirin_drm_drv.h in a future patch
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-8-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames the
struct ade_plane to kirin_plane.
The struct kirin_plane will later used by both kirin620 and
future kirin960 driver, and will be moved to a common
kirin_drm_drv.h in a future patch
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-7-john.stultz@linaro.org
As part of refactoring the kirin driver to better support
different hardware revisions, this patch removes the out_format
field in the struct ade_crtc, which was only ever set to
LDI_OUT_RGB_888.
Thus this patch removes the field and instead directly uses
LDI_OUT_RGB_888.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-6-john.stultz@linaro.org
In a few functions, we pass in a struct ade_crtc, which we only
use to get to the underlying struct ade_hw_ctx.
Thus this patch refactors the functions to just take the
struct ade_hw_ctx directly.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-5-john.stultz@linaro.org
The 'return 0' in kirin_drm_platform_probe() is unreachable
code, so remove it.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Suggested by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-4-john.stultz@linaro.org
The CONFIG_HISI_KIRIN_DW_DSI option is only used w/ kirin
driver, so cut out the middleman and condense the config
logic down.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-3-john.stultz@linaro.org
The original HiKey (620) board has had a long running issue
where when using a 1080p montior, the display would occasionally
blink and come come back with a horizontal offset (usually also
shifting the colors, depending on the value of the offset%4).
After lots of analysis by HiSi developers, they found the issue
was due to when running at 1080p, it was possible to hit the
device memory bandwidth limits, which could cause the DSI signal
to get out of sync.
Unfortunately the DSI logic doesn't have the ability to
automatically recover from this situation, but we can get a an
LDI underflow interrupt when it happens.
To then correct the issue, when we get an LDI underflow irq, we
we can simply suspend and resume the display, which resets the
hardware.
Thus, this patch enables the ldi underflow interrupt, and
initializes a workqueue that is used to suspend/resume the
display to recover. Then when the irq occurs we clear it and
schedule the workqueue to reset display engine.
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Da Lv <lvda3@hisilicon.com>
Signed-off-by: Yidong Lin <linyidong@huawei.com>
[jstultz: Reworded the commit message, checkpatch cleanups]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-2-john.stultz@linaro.org
Dan Carpenter