Pull irq updates from Thomas Gleixner:
"The interrupt subsystem delivers this time:
- Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support
- Initial GIC-V4 support
- Consolidation of the FSL MSI support
- Utilize the effective affinity interface in various ARM irqchip
drivers
- Yet another interrupt chip driver (UniPhier AIDET)
- Bulk conversion of the irq chip driver to use %pOF
- The usual small fixes and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
irqchip/ls-scfg-msi: Add MSI affinity support
irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
irqchip/ls-scfg-msi: Add LS1046a MSI support
arm64: dts: ls1046a: Add MSI dts node
arm64: dts: ls1043a: Share all MSIs
arm: dts: ls1021a: Share all MSIs
arm64: dts: ls1043a: Fix typo of MSI compatible string
arm: dts: ls1021a: Fix typo of MSI compatible string
irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
irqchip/mmp: Make mmp_intc_conf const
irqchip/gic: Make irq_chip const
irqchip/gic-v3: Advertise GICv4 support to KVM
irqchip/gic-v4: Enable low-level GICv4 operations
irqchip/gic-v4: Add some basic documentation
irqchip/gic-v4: Add VLPI configuration interface
irqchip/gic-v4: Add VPE command interface
irqchip/gic-v4: Add per-VM VPE domain creation
irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
...
Pull locking updates from Ingo Molnar:
- Add 'cross-release' support to lockdep, which allows APIs like
completions, where it's not the 'owner' who releases the lock, to be
tracked. It's all activated automatically under
CONFIG_PROVE_LOCKING=y.
- Clean up (restructure) the x86 atomics op implementation to be more
readable, in preparation of KASAN annotations. (Dmitry Vyukov)
- Fix static keys (Paolo Bonzini)
- Add killable versions of down_read() et al (Kirill Tkhai)
- Rework and fix jump_label locking (Marc Zyngier, Paolo Bonzini)
- Rework (and fix) tlb_flush_pending() barriers (Peter Zijlstra)
- Remove smp_mb__before_spinlock() and convert its usages, introduce
smp_mb__after_spinlock() (Peter Zijlstra)
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
locking/lockdep/selftests: Fix mixed read-write ABBA tests
sched/completion: Avoid unnecessary stack allocation for COMPLETION_INITIALIZER_ONSTACK()
acpi/nfit: Fix COMPLETION_INITIALIZER_ONSTACK() abuse
locking/pvqspinlock: Relax cmpxchg's to improve performance on some architectures
smp: Avoid using two cache lines for struct call_single_data
locking/lockdep: Untangle xhlock history save/restore from task independence
locking/refcounts, x86/asm: Disable CONFIG_ARCH_HAS_REFCOUNT for the time being
futex: Remove duplicated code and fix undefined behaviour
Documentation/locking/atomic: Finish the document...
locking/lockdep: Fix workqueue crossrelease annotation
workqueue/lockdep: 'Fix' flush_work() annotation
locking/lockdep/selftests: Add mixed read-write ABBA tests
mm, locking/barriers: Clarify tlb_flush_pending() barriers
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE and CONFIG_LOCKDEP_COMPLETIONS truly non-interactive
locking/lockdep: Explicitly initialize wq_barrier::done::map
locking/lockdep: Rename CONFIG_LOCKDEP_COMPLETE to CONFIG_LOCKDEP_COMPLETIONS
locking/lockdep: Reword title of LOCKDEP_CROSSRELEASE config
locking/lockdep: Make CONFIG_LOCKDEP_CROSSRELEASE part of CONFIG_PROVE_LOCKING
locking/refcounts, x86/asm: Implement fast refcount overflow protection
locking/lockdep: Fix the rollback and overwrite detection logic in crossrelease
...
Pull syscall updates from Ingo Molnar:
"Improve the security of set_fs(): we now check the address limit on a
number of key platforms (x86, arm, arm64) before returning to
user-space - without adding overhead to the typical system call fast
path"
* 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/syscalls: Check address limit on user-mode return
arm/syscalls: Check address limit on user-mode return
x86/syscalls: Check address limit on user-mode return
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add branch type profiling/tracing support. (Jin Yao)
- Add the PERF_SAMPLE_PHYS_ADDR ABI to allow the tracing/profiling of
physical memory addresses, where the PMU supports it. (Kan Liang)
- Export some PMU capability details in the new
/sys/bus/event_source/devices/cpu/caps/ sysfs directory. (Andi
Kleen)
- Aux data fixes and updates (Will Deacon)
- kprobes fixes and updates (Masami Hiramatsu)
- AMD uncore PMU driver fixes and updates (Janakarajan Natarajan)
On the tooling side, here's a (limited!) list of highlights - there
were many other changes that I could not list, see the shortlog and
git history for details:
UI improvements:
- Implement a visual marker for fused x86 instructions in the
annotate TUI browser, available now in 'perf report', more work
needed to have it available as well in 'perf top' (Jin Yao)
Further explanation from one of Jin's patches:
│ ┌──cmpl $0x0,argp_program_version_hook
81.93 │ ├──je 20
│ │ lock cmpxchg %esi,0x38a9a4(%rip)
│ │↓ jne 29
│ │↓ jmp 43
11.47 │20:└─→cmpxch %esi,0x38a999(%rip)
That means the cmpl+je is a fused instruction pair and they should
be considered together.
- Record the branch type and then show statistics and info about in
callchain entries (Jin Yao)
Example from one of Jin's patches:
# perf record -g -j any,save_type
# perf report --branch-history --stdio --no-children
38.50% div.c:45 [.] main div
|
---main div.c:42 (RET CROSS_2M cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (RET CROSS_2M cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M cycles:9)
namespaces support:
- Add initial support for namespaces, using setns to access files in
namespaces, grabbing their build-ids, etc. (Krister Johansen)
perf trace enhancements:
- Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace'
(Arnaldo Carvalho de Melo)
- Add initial 'clone' syscall args beautifier in 'perf trace'
(Arnaldo Carvalho de Melo)
- Ignore 'fd' and 'offset' args for MAP_ANONYMOUS in 'perf trace'
(Arnaldo Carvalho de Melo)
- Beautifiers for the 'cmd' arg of several ioctl types, including:
sound, DRM, KVM, vhost virtio and perf_events. (Arnaldo Carvalho de
Melo)
- Add PERF_SAMPLE_CALLCHAIN and PERF_RECORD_MMAP[2] to 'perf data'
CTF conversion, allowing CTF trace visualization tools to show
callchains and to resolve symbols (Geneviève Bastien)
- Beautify the fcntl syscall, which is an interesting one in the
sense that infrastructure had to be put in place to change the
formatters of some arguments according to the value in a previous
one, i.e. cmd dictates how arg and the syscall return will be
formatted. (Arnaldo Carvalho de Melo
perf stat enhancements:
- Use group read for event groups in 'perf stat', reducing overhead
when groups are defined in the event specification, i.e. when using
{} to enclose a list of events, asking them to be read at the same
time, e.g.: "perf stat -e '{cycles,instructions}'" (Jiri Olsa)
pipe mode improvements:
- Process tracing data in 'perf annotate' pipe mode (David
Carrillo-Cisneros)
- Add header record types to pipe-mode, now this command:
$ perf record -o - -e cycles sleep 1 | perf report --stdio --header
Will show the same as in non-pipe mode, i.e. involving a perf.data
file (David Carrillo-Cisneros)
Vendor specific hardware event support updates/enhancements:
- Update POWER9 vendor events tables (Sukadev Bhattiprolu)
- Add POWER9 PMU events Sukadev (Bhattiprolu)
- Support additional POWER8+ PVR in PMU mapfile (Shriya)
- Add Skylake server uncore JSON vendor events (Andi Kleen)
- Support exporting Intel PT data to sqlite3 with python perf
scripts, this is in addition to the postgresql support that was
already there (Adrian Hunter)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (253 commits)
perf symbols: Fix plt entry calculation for ARM and AARCH64
perf probe: Fix kprobe blacklist checking condition
perf/x86: Fix caps/ for !Intel
perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR
perf/core, pt, bts: Get rid of itrace_started
perf trace beauty: Beautify pkey_{alloc,free,mprotect} arguments
tools headers: Sync cpu features kernel ABI headers with tooling headers
perf tools: Pass full path of FEATURES_DUMP
perf tools: Robustify detection of clang binary
tools lib: Allow external definition of CC, AR and LD
perf tools: Allow external definition of flex and bison binary names
tools build tests: Don't hardcode gcc name
perf report: Group stat values on global event id
perf values: Zero value buffers
perf values: Fix allocation check
perf values: Fix thread index bug
perf report: Add dump_read function
perf record: Set read_format for inherit_stat
perf c2c: Fix remote HITM detection for Skylake
perf tools: Fix static build with newer toolchains
...
Commit 2436bdcda5 ("dma-coherent: remove the DMA_MEMORY_MAP and
DMA_MEMORY_IO flags") missed to remove the 'dma' variable causing
the following build warning:
arch/arm/mach-imx/mach-mx31moboard.c:478:6: warning: unused variable 'dma' [-Wunused-variable]
Remove the unused 'dma' variable.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull RCU updates from Ingo Molnad:
"The main RCU related changes in this cycle were:
- Removal of spin_unlock_wait()
- SRCU updates
- RCU torture-test updates
- RCU Documentation updates
- Extend the sys_membarrier() ABI with the MEMBARRIER_CMD_PRIVATE_EXPEDITED variant
- Miscellaneous RCU fixes
- CPU-hotplug fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
arch: Remove spin_unlock_wait() arch-specific definitions
locking: Remove spin_unlock_wait() generic definitions
drivers/ata: Replace spin_unlock_wait() with lock/unlock pair
ipc: Replace spin_unlock_wait() with lock/unlock pair
exit: Replace spin_unlock_wait() with lock/unlock pair
completion: Replace spin_unlock_wait() with lock/unlock pair
doc: Set down RCU's scheduling-clock-interrupt needs
doc: No longer allowed to use rcu_dereference on non-pointers
doc: Add RCU files to docbook-generation files
doc: Update memory-barriers.txt for read-to-write dependencies
doc: Update RCU documentation
membarrier: Provide expedited private command
rcu: Remove exports from rcu_idle_exit() and rcu_idle_enter()
rcu: Add warning to rcu_idle_enter() for irqs enabled
rcu: Make rcu_idle_enter() rely on callers disabling irqs
rcu: Add assertions verifying blocked-tasks list
rcu/tracing: Set disable_rcu_irq_enter on rcu_eqs_exit()
rcu: Add TPS() protection for _rcu_barrier_trace strings
rcu: Use idle versions of swait to make idle-hack clear
swait: Add idle variants which don't contribute to load average
...
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
-----BEGIN PGP SIGNATURE-----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=5fxW
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.14 merge window.
I'm sending this early, as my continuing journey into fatherhood is
occurring really soon now, I'm going to be mostly useless for the next
couple of weeks, though I may be able to read email, I doubt I'll be
doing much patch applications or git sending. If anything urgent pops
up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
you.
Outside drm changes:
Some rcar-du updates that touch the V4L tree, all acks should be in
place. It adds one export to the radix tree code for new i915 use
case. There are some minor AGP cleanups (don't see that too often).
Changes to the vbox driver in staging to avoid breaking compilation.
Summary:
core:
- Atomic helper fixes
- Atomic UAPI fixes
- Add YCBCR 4:2:0 support
- Drop set_busid hook
- Refactor fb_helper locking
- Remove a bunch of internal APIs
- Add a bunch of better default handlers
- Format modifier/blob plane property added
- More internal header refactoring
- Make more internal API names consistent
- Enhanced syncobj APIs (wait/signal/reset/create signalled)
bridge:
- Add Synopsys Designware MIPI DSI host bridge driver
tiny:
- Add Pervasive Displays RePaper displays
- Add support for LEGO MINDSTORMS EV3 LCD
i915:
- Lots of GEN10/CNL support patches
- drm syncobj support
- Skylake+ watermark refactoring
- GVT vGPU 48-bit ppgtt support
- GVT performance improvements
- NOA change ioctl
- CCS (color compression) scanout support
- GPU reset improvements
amdgpu:
- Initial hugepage support
- BO migration logic rework
- Vega10 improvements
- Powerplay fixes
- Stop reprogramming the MC
- Fixes for ACP audio on stoney
- SR-IOV fixes/improvements
- Command submission overhead improvements
amdkfd:
- Non-dGPU upstreaming patches
- Scratch VA ioctl
- Image tiling modes
- Update PM4 headers for new firmware
- Drop all BUG_ONs.
nouveau:
- GP108 modesetting support.
- Disable MSI on big endian.
vmwgfx:
- Add fence fd support.
msm:
- Runtime PM improvements
exynos:
- NV12MT support
- Refactor KMS drivers
imx-drm:
- Lock scanout channel to improve memory bw
- Cleanups
etnaviv:
- GEM object population fixes
tegra:
- Prep work for Tegra186 support
- PRIME mmap support
sunxi:
- HDMI support improvements
- HDMI CEC support
omapdrm:
- HDMI hotplug IRQ support
- Big driver cleanup
- OMAP5 DSI support
rcar-du:
- vblank fixes
- VSP1 updates
arcgpu:
- Minor fixes
stm:
- Add STM32 DSI controller driver
dw_hdmi:
- Add support for Rockchip RK3399
- HDMI CEC support
atmel-hlcdc:
- Add 8-bit color support
vc4:
- Atomic fixes
- New ioctl to attach a label to a buffer object
- HDMI CEC support
- Allow userspace to dictate rendering order on submit ioctl"
* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
drm/syncobj: Add a signal ioctl (v3)
drm/syncobj: Add a reset ioctl (v3)
drm/syncobj: Add a syncobj_array_find helper
drm/syncobj: Allow wait for submit and signal behavior (v5)
drm/syncobj: Add a CREATE_SIGNALED flag
drm/syncobj: Add a callback mechanism for replace_fence (v3)
drm/syncobj: add sync obj wait interface. (v8)
i915: Use drm_syncobj_fence_get
drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
drm/syncobj: Rename fence_get to find_fence
drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
drm/vmwgfx: Bump the version for fence FD support
drm/vmwgfx: Add export fence to file descriptor support
drm/vmwgfx: Add support for imported Fence File Descriptor
drm/vmwgfx: Prepare to support fence fd
drm/vmwgfx: Fix incorrect command header offset at restart
drm/vmwgfx: Support the NOP_ERROR command
drm/vmwgfx: Restart command buffers after errors
drm/vmwgfx: Move irq bottom half processing to threads
drm/vmwgfx: Don't use drm_irq_[un]install
...
* pm-sleep:
ACPI / PM: Check low power idle constraints for debug only
PM / s2idle: Rename platform operations structure
PM / s2idle: Rename ->enter_freeze to ->enter_s2idle
PM / s2idle: Rename freeze_state enum and related items
PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE
ACPI / PM: Prefer suspend-to-idle over S3 on some systems
platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle
PM / suspend: Define pr_fmt() in suspend.c
PM / suspend: Use mem_sleep_labels[] strings in messages
PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG
PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq()
PM / core: Add error argument to dpm_show_time()
PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq()
PM / s2idle: Rearrange the main suspend-to-idle loop
PM / timekeeping: Print debug messages when requested
PM / sleep: Mark suspend/hibernation start and finish
PM / sleep: Do not print debug messages by default
PM / suspend: Export pm_suspend_target_state
* pm-cpufreq: (33 commits)
cpufreq: imx6q: Fix imx6sx low frequency support
cpufreq: speedstep-lib: make several arrays static, makes code smaller
cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
cpufreq: dt-platdev: Drop few entries from whitelist
cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
ARM: ux500: don't select CPUFREQ_DT
cpufreq: Convert to using %pOF instead of full_name
cpufreq: Cap the default transition delay value to 10 ms
cpufreq: dbx500: Delete obsolete driver
mfd: db8500-prcmu: Get rid of cpufreq dependency
cpufreq: enable the DT cpufreq driver on the Ux500
cpufreq: Loongson2: constify platform_device_id
cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver
cpufreq: remove setting of policy->cpu in policy->cpus during init
cpufreq: mediatek: add support of cpufreq to MT7622 SoC
cpufreq: mediatek: add cleanups with the more generic naming
cpufreq: rcar: Add support for R8A7795 SoC
cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver
cpufreq: s5pv210: add missing of_node_put()
cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency
...
A couple of late-arriving fixes before final 4.13:
- A few reverts of DT bindings on Allwinner for their ethernet
driver. Discussion didn't converge, and since bindings are considered
ABI it makes sense to revert instead of having to support two bindings
long-term.
- A fix to enumerate GPIOs properly on Marvell Armada AP806
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3QBk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A couple of late-arriving fixes before final 4.13:
- A few reverts of DT bindings on Allwinner for their ethernet
driver. Discussion didn't converge, and since bindings are
considered ABI it makes sense to revert instead of having to
support two bindings long-term.
- A fix to enumerate GPIOs properly on Marvell Armada AP806"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
arm: dts: sunxi: Revert EMAC changes
arm64: dts: allwinner: Revert EMAC changes
dt-bindings: net: Revert sun8i dwmac binding
Sometimes root file system is deployed on SD card. It's
proper to build eSDHC driver into kernel.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet
-----BEGIN PGP SIGNATURE-----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=0xy6
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner fixes for 4.13, take 3
This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet
* tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: sunxi: Revert EMAC changes
arm64: dts: allwinner: Revert EMAC changes
dt-bindings: net: Revert sun8i dwmac binding
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
Signed-off-by: Olof Johansson <olof@lixom.net>
This new clock driver set allows to have a fractional divided clock that
would generate a precise clock particularly suitable for audio
applications.
The main audio pll clock has two children clocks: one that is connected
to the PMC, the other that can directly drive a pad. As these two routes
have different enable bits and different dividers and divider formulas,
they are handled by two different drivers. Each of them could modify the
rate of the main audio pll parent.
The main audio pll clock can output 620MHz to 700MHz.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs
and the following driver changes:
* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
-----BEGIN PGP SIGNATURE-----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=bC1+
-----END PGP SIGNATURE-----
Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/next
From Boris:
"
This pull request contains the following core changes:
* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs
and the following driver changes:
* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
"
DMA_MEMORY_IO was never used in the tree, so remove it. That means there is
no need for the DMA_MEMORY_MAP flag either now, so remove it as well and
change dma_declare_coherent_memory to return a normal errno value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Calls to mmu_notifier_invalidate_page() were replaced by calls to
mmu_notifier_invalidate_range() and are now bracketed by calls to
mmu_notifier_invalidate_range_start()/end()
Remove now useless invalidate_page callback.
Changed since v1 (Linus Torvalds)
- remove now useless kvm_arch_mmu_notifier_invalidate_page()
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- irqchip-specific part of the monster GICv4 series
- new UniPhier AIDET irqchip driver
- new variants of some Freescale MSI widget
- blanket removal of of_node->full_name in printk
- random collection of fixes
-----BEGIN PGP SIGNATURE-----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=3ZS3
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 4.14 from Marc Zyngier:
- irqchip-specific part of the monster GICv4 series
- new UniPhier AIDET irqchip driver
- new variants of some Freescale MSI widget
- blanket removal of of_node->full_name in printk
- random collection of fixes
In order to maximize the use of MSI, a PCIe controller will share
all MSI controllers. The patch changes msi-parent to refer to all
MSI controller dts nodes.
Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
"1" should be replaced by "l". This is a typo.
The patch is to fix it.
Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When masking/unmasking a doorbell interrupt, it is necessary
to issue an invalidation to the corresponding redistributor.
We use the DirectLPI feature by writting directly to the corresponding
redistributor.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
V{PEND,PROP}BASER being 64bit registers, they need some ad-hoc
accessors on 32bit, specially given that VPENDBASER contains
a Valid bit, making the access a bit convoluted.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
One new board, and a revert of a patch relying on a binding not stable
enough so that we can commit to it.
-----BEGIN PGP SIGNATURE-----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=jgbH
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.14-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.14, take 3
One new board, and a revert of a patch relying on a binding not stable
enough so that we can commit to it.
* tag 'sunxi-dt-for-4.14-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
ARM: sun8i: a83t: Add device tree for Sinovoip Bananapi BPI-M3
Signed-off-by: Olof Johansson <olof@lixom.net>
AT91SAM9G45 has an AC97 controller, but it is not described in the dts
file.
This patch adds AC97 node in device tree.
Signed-off-by: Dmitry Rezvanov <dmitry.rezvanov@yandex.ru>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZo+FRAAoJEBx+YmzsjxAgarAP/3UNFp1qce9IorGf9YOYFRcf
YVFf/laHpEsbjGC2iDDCMSrW34hx1Jsmnci8Pp9QM6d5vzDg4F41MW1T6Vx6R72v
DioMLctVi6nHUmJa0nJuiwhMQUmu+9gn7qFYk1N/bBFmKNrrettNv6kb929a+U29
5xiBNzaV7lVOPLJleOcAjRhxndsCcoSQ7r5yUQ04L0D2VItSw+tkQg9RVCeW/wxZ
mGgXUSSvz0IMQ9bAyczG8RRlT2tLXRyXqJ5ktPJbxigV9OehMQOsShZZvzTiisbp
pQxw5NoWuy4Bs1dnSW9+FmkQc+ikhD+jl1l8e/dFN8OS6YmBZYSWsJ7usdxMmxx/
iiVPFFg0cheDlnu3njokBkOOUiEwYcM662bXDhXe8nZlVlZHfomq50JW89PVdM9F
6hXPO38uYGf8qjD35N55mU97iLRZawHTeBHvH1uhOCRxxAVYpgEFMyWSVXjDVzZv
SncMlMqx0wDtc11G72aF3TL6Mvfcp88X52l0otvAiQbjLltOSxUuDLXQd/ydVE+p
jRJXjYPxQa+TKg/36WGe2gdLIONiV39NSpy951gJR96OI4/CcuSkk8n1oMmMYBbB
2JMOC3q3KypuHOUXyw1fyZdZvgvQXWOwiETXqp7VnCIHP0RRXEKJC/41vLBwhlb0
0YNQmFIbjzIFGFN6PjsX
=0xy6
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.13, take 3
This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet
* tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: sunxi: Revert EMAC changes
arm64: dts: allwinner: Revert EMAC changes
dt-bindings: net: Revert sun8i dwmac binding
Signed-off-by: Olof Johansson <olof@lixom.net>
When there's a fatal signal pending, arm's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.
However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.
To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reading TTBCR in early boot stage might return the value of the previous
kernel's configuration, especially in case of kexec. For example, if
normal kernel (first kernel) had run on a configuration of PHYS_OFFSET <=
PAGE_OFFSET and crash kernel (second kernel) is running on a configuration
PHYS_OFFSET > PAGE_OFFSET, which can happen because it depends on the
reserved area for crash kernel, reading TTBCR and using the value to OR
other bit fields might be risky because it doesn't have a reset value for TTBCR.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Hoeun Ryu <hoeun.ryu@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add pinctrl groups of ethenet phy mode, such as "ether_rgmii", "ether_rmii",
and "ether_mii".
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since the discussion is not settled yet for the EMAC, and that the release
in getting really close, let's revert the changes for now, and we'll
reintroduce them later.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This reverts commit ddb56254ae. The EMAC
bindings have not stabilized yet, so we can't commit to keeping them
stable.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch solves the following error:
arch/arm/boot/dts/rk3228-evb.dtb: ERROR (phandle_references): Reference to non-existent node or label "phy0"
Fixess db40f15b53 ("ARM: dts: rk3228-evb: Enable the integrated PHY for gmac")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the as3645a flash controller to the DT source.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is code duplicated over all architecture's headers for
futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr,
and comparison of the result.
Remove this duplication and leave up to the arches only the needed
assembly which is now in arch_futex_atomic_op_inuser.
This effectively distributes the Will Deacon's arm64 fix for undefined
behaviour reported by UBSAN to all architectures. The fix was done in
commit 5f16a046f8 (arm64: futex: Fix undefined behaviour with
FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump.
And as suggested by Thomas, check for negative oparg too, because it was
also reported to cause undefined behaviour report.
Note that s390 removed access_ok check in d12a29703 ("s390/uaccess:
remove pointless access_ok() checks") as access_ok there returns true.
We introduce it back to the helper for the sake of simplicity (it gets
optimized away anyway).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64]
Cc: linux-mips@linux-mips.org
Cc: Rich Felker <dalias@libc.org>
Cc: linux-ia64@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: peterz@infradead.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sparclinux@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-hexagon@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: openrisc@lists.librecores.org
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Stafford Horne <shorne@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-parisc@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-alpha@vger.kernel.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz
The new 'select CPUFREQ_DT' statement causes a warning in some
configurations:
warning: (ARCH_U8500) selects CPUFREQ_DT which has unmet direct dependencies (CPU_FREQ && HAVE_CLK && OF && (!CPU_THERMAL || THERMAL))
No other platform does this, so I think for consistency it's
best if we remove it again from ux500 and instead add the driver
to the defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A small number of bugfixes, again nothing serious.
- Alexander Dahl found multiple bugs in the Atmel memory interface driver
- A randconfig build fix for at91 was incomplete, the second
attempt fixes the remaining corner case
- One fix for the TI Keystone queue handler
- The Odroid XU4 HDMI port (added in 4.13) needs a small
DT fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=efYA
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A small number of bugfixes, again nothing serious.
- Alexander Dahl found multiple bugs in the Atmel memory interface
driver
- A randconfig build fix for at91 was incomplete, the second attempt
fixes the remaining corner case
- One fix for the TI Keystone queue handler
- The Odroid XU4 HDMI port (added in 4.13) needs a small DT fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: exynos: add needs-hpd for Odroid-XU3/4
ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms
soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create
memory: atmel-ebi: Fix smc cycle xlate converter
memory: atmel-ebi: Allow t_DF timings of zero ns
memory: atmel-ebi: Fix smc timing return value evaluation
as some peripherals like the Mali gpu do support 64bit dma addresses.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmeoV4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQdACAC0lVl2/kcQigHyGAwHZI6WU3kQvPzw1hBI
PjFL1VGP+J5ZgqYYGiA+HGJn1Wb2u05kWf73LJikyTjYty0JIbpGLT/zZIymkrGE
jJTHx7UsddaayC4h3PfVc9xjV35L1Uxr/3pCYXmbB4DZZD9jUyR5Aa4bHQ3TjAHA
ZMZsp4WO29UWIRpafYRgMXxmxofJLOUUi0hQdS/LXhLDRozNgtVRfQibC4LgDX00
gbMaLOmmdbNrRDtC4IQw8u0GNDaJ88gVPpjVdkYovh22lS3V0EfmBwW9bVmXHyVc
vwLhCgjqkqKdQnuMOD1c+6mC+L97Q51dO8iBnUUnU+fM44E86rcn
=bBGl
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-soc32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
Pull "second round of Rockchip soc32 changes for 4.14" from Heiko Stübner:
Enable the ARCH_DMA_ADDR_T_64BIT kconfig option for LPAE builds,
as some peripherals like the Mali gpu do support 64bit dma addresses.
* tag 'v4.14-rockchip-soc32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: select ARCH_DMA_ADDR_T_64BIT for LPAE
(usb, operating points, spi, pwm, adc, watchdog, i2c and devices for
its evb).
RK3228/3229 gets iommu and spi nodes. Similar to the rk3288 which
also gets some more iommu nodes as well as getting converted to 64
bit addresses due to wanting to address more than 4GB of memory
via LPAE.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmdoA4QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgeBtB/9oM4MmVRJ0YX7hk4NuU9c4HHdvCW0f1rJe
Q6rE6dP7fW3J27d6PuySVWzvIBmD+3xVA2t0dDm85DIP8f1DFz3vyNhkEsu1VG89
MULTektihczugCy+sh3iHILs4fLXJ8QUjCKJWOcWmZHOaXNXXjJIVjC97m5F4ZAj
KVOYXNnCKdaHYIeP0lkjStL8Z9Ua7svkjfgsSPTGTSJQQ+bGcd/8JnmlkzjfHWLw
qNz6M7FPoJ1rAffskr1At27oRs7UAVSKNAejl8DWKvLXml6NQPRRRu99sLLanxII
3b6LsC6Vwea4a1Rjwx0LZWdDUtB1W34/ZIEw4JceK/i6HfV5K2Oi
=di6U
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "second round of Rockchip dts32 changes for 4.14" from Heiko Stübner:
A lot of attention for the rv1108 soc targetted at media-processing
(usb, operating points, spi, pwm, adc, watchdog, i2c and devices for
its evb).
RK3228/3229 gets iommu and spi nodes. Similar to the rk3288 which
also gets some more iommu nodes as well as getting converted to 64
bit addresses due to wanting to address more than 4GB of memory
via LPAE.
* tag 'v4.14-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: rockchip: add cpu power supply for rv1108 evb
ARM: dts: rockchip: add cpu opp table for rv1108
ARM: dts: rockchip: add rk322x iommu nodes
ARM: dts: rockchip: add accelerometer bma250e dt node for rv1108 evb
ARM: dts: rockchip: add pmic rk805 dt node for rv1108 evb
ARM: dts: rockchip: add pwm backlight for rv1108 evb
ARM: dts: rockchip: add pwm dt nodes for rv1108
ARM: dts: rockchip: add spi dt node for rv1108
ARM: dts: rockchip: add saradc support for rv1108
ARM: dts: rockchip: add watchdog dt node for rv1108
ARM: dts: rockchip: add i2c dt nodes for rv1108
clk: rockchip: fix up indentation of some RV1108 clock-ids
clk: rockchip: rename the clk id for HCLK_I2S1_2CH
clk: rockchip: add more clk ids for rv1108
ARM: dts: rockchip: add more iommu nodes on rk3288
ARM: dts: rockchip: convert rk3288 device tree files to 64 bits
ARM: dts: rockchip: add spi node and spi pinctrl on rk3228/rk3229
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The function that was added doesn't actually build:
arch/arm/mach-omap2/display.c: In function 'omapdss_init_fbdev':
arch/arm/mach-omap2/display.c:184:2: error: 'r' undeclared (first use in this function)
This adds a declaration for 'r' to fix it.
Fixes: 5ce783025c ("ARM: OMAP2+: Don't register omapdss device for omapdrm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
- fix to expose the full flash windows on ast2400.
-----BEGIN PGP SIGNATURE-----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=q9Dz
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
Pull "Aspeed devicetree updates for 4.14" from Joel Stanley:
- fix to expose the full flash windows on ast2400.
* tag 'aspeed-4.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
- Enable new Aspeed drivers for i2c, lpc snoop and vuart
- Set VMSPLIT_2G for ast2400 platforms, required for mtd driver
-----BEGIN PGP SIGNATURE-----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=brUg
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.14-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/defconfig
Pull "Aspeed defconfig updates for 4.14" from Joel Stanley:
- Enable new Aspeed drivers for i2c, lpc snoop and vuart
- Set VMSPLIT_2G for ast2400 platforms, required for mtd driver
* tag 'aspeed-4.14-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed: Add I2C, VUART, LPC Snoop
ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
Fix PCI bus dtc warnings.
-----BEGIN PGP SIGNATURE-----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=6neG
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for v4.14, part 2" from Krzysztof Kozłowski:
Fix PCI bus dtc warnings.
* tag 'samsung-dt-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: fix PCI bus dtc warnings
CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set
'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal,
just as for the exynos4 Odroid-U3.
This is due to the level-shifter that is disabled when there is no HPD, thus
blocking the CEC signal as well. Same close-but-no-cigar board design as the
Odroid-U3.
Tested with my Odroid XU4.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
My previous patch fixed a link error for all at91 platforms when
CONFIG_ARM_CPU_SUSPEND was not set, however this caused another
problem on a configuration that enabled CONFIG_ARCH_AT91 but none
of the individual SoCs, and that also enabled CPU_ARM720 as
the only CPU:
warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
arch/arm/kernel/sleep.o: In function `cpu_resume':
(.text+0xf0): undefined reference to `cpu_arm720_suspend_size'
arch/arm/kernel/suspend.o: In function `__cpu_suspend_save':
suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend'
This improves the hack some more by only selecting ARM_CPU_SUSPEND
for the part that requires it, and changing pm.c to drop the
contents of unused init functions so we no longer refer to
cpu_resume on at91 platforms that don't need it.
Fixes: cc7a938f5f ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rockchip's rv1108-evb board has one usb otg controller and one usb
host controller, each usb controller connect with one usb-phy port
through UTMI+ interface. This patch enables them to support usb on
rv1108-evb board.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds usb otg/host controllers and phys nodes for RV1108 SoCs.
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The window of the Aspeed AST2400 SMC Controllers to map chips on the
AHB Bus has a 256MB size. The full window range is
[ 0x20000000 - 0x2FFFFFFF ] for the FMC controller
[ 0x30000000 - 0x3FFFFFFF ] for the SPI controller
This change requires CONFIG_VMSPLIT_2G to be set.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
These drivers have been recently upstreamed, so add them to the
defconfigs.
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is required for the SMC controller mapping windows on the AHB
Bus.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The cpu is powered by regulator vdd_core on RV1108 evalution
board. Add it to the cpu dt node.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add cpu opp table for rv1108 to support frequency
from 408MHZ to 1008MHZ.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The JIT compiler emits ARM 32 bit instructions. Currently, It supports
eBPF only. Classic BPF is supported because of the conversion by BPF core.
This patch is essentially changing the current implementation of JIT compiler
of Berkeley Packet Filter from classic to internal with almost all
instructions from eBPF ISA supported except the following
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW
Implementation is using scratch space to emulate 64 bit eBPF ISA on 32 bit
ARM because of deficiency of general purpose registers on ARM. Currently,
only LITTLE ENDIAN machines are supported in this eBPF JIT Compiler.
Tested on ARMv7 with QEMU by me (Shubham Bansal).
Testing results on ARMv7:
1) test_bpf: Summary: 341 PASSED, 0 FAILED, [312/333 JIT'ed]
2) test_tag: OK (40945 tests)
3) test_progs: Summary: 30 PASSED, 0 FAILED
4) test_lpm: OK
5) test_lru_map: OK
Above tests are all done with following flags enabled discreatly.
1) bpf_jit_enable=1
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
2) bpf_jit_enable=1 and bpf_jit_harden=2
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
See Documentation/networking/filter.txt for more information.
Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have moved the Ux500 over to use the generic DT based
cpufreq driver, so delete the old custom driver.
At the same time select CPUFREQ_DT from the machine's
Kconfig in order to satisfy the "default ARCH_U8500"
selection on the old driver.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Remove earlycon
- Use C pre-processor
- Add fpga full region
- Add ethernet-phy as device-type
- Add adv7511 nodes to zc70x
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlmaypgACgkQykllyylKDCEpkACgkWAijGmJRMDb5HvrH7npUkwz
QRkAnjQCUrRIO5RbuXob5fIZurV2kMwn
=7Ggj
-----END PGP SIGNATURE-----
Merge tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx into next/dt
Pull "arm: Xilinx Zynq DT fixes for v4.14" from Michal Simek:
- Remove earlycon
- Use C pre-processor
- Add fpga full region
- Add ethernet-phy as device-type
- Add adv7511 nodes to zc70x
* tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx:
arm: zynq: Remove earlycon from bootargs
arm: zynq: Use C pre-processor for includes in dts
arm: zynq: Label whole PL part as fpga_full region
arm: zynq: Add device-type property for zynq ethernet phy nodes
arm: zynq: Add adv7511 on i2c bus for zc70x
This adds the operating points to the Ux500 device tree and
deletes the old special-purpose cpufreq node, as we can now
use the generic DT cpufreq driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After commit e9f66ae23c ("mtd: s3c2410: make ecc mode configurable via
platform data") booting of the mini2440 board is broken, since
for this board we have CONFIG_MTD_NAND_S3C2410_HWECC set. The console
gets flooded with errors reported by the mtd subsystem.
This patch changes ecc_mode to NAND_ECC_HW which restores proper
operation of the NAND flash memory.
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Fixes: e9f66ae23c ("mtd: s3c2410: make ecc mode configurable via platform data")
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Earlyconsole is used for early kernel debugging that's why this option
shouldn't be enabled by default.
Earlyconsole is partially copying the part of the bootlog after
"bootconsole [uart0] disabled".
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This brings all Zynq device trees inline
with each other.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Mention device-type = "ethernet-phy", as qemu will need this in absence
of compatible.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This adds a new node for the LEGO MINDSTORMS EV3 LCD display.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This enables the tinydrm and ST7586 panel modules used by the display
on LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add dt node of bosch accelerometer bma250e on rv1108 evb.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK805 is used as the voltage regulator on rv1108 evaluation
board. Add device tree node for it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
To prevent unintended modifications to the kernel text (malicious or
otherwise) while running the EFI stub, describe the kernel image as
two separate sections: a .text section with read-execute permissions,
covering .text, .rodata, .piggytext and the GOT sections (which the
stub does not care about anyway), and a .data section with read-write
permissions, covering .data and .bss.
This relies on the firmware to actually take the section permission
flags into account, but this is something that is currently being
implemented in EDK2, which means we will likely start seeing it in
the wild between one and two years from now.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-12-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the various open coded constants in the EFI PE/COFF header with
definitions from pe.h, or expressions based on local symbols.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-11-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The kernel's EFI PE/COFF header contains a dummy .reloc section, and
an explanatory comment that claims that this is required for the EFI
application loader to accept the Image as a relocatable image (i.e.,
one that can be loaded at any offset and fixed up in place)
This was inherited from the x86 implementation, which has elaborate host
tooling to mangle the PE/COFF header post-link time, and which populates
the .reloc section with a single dummy base relocation. On ARM, no such
tooling exists, and the .reloc section remains empty, and is never even
exposed via the BaseRelocationTable directory entry, which is where the
PE/COFF loader looks for it.
The PE/COFF spec is unclear about relocatable images that do not require
any fixups, but the EDK2 implementation, which is the de facto reference
for PE/COFF in the UEFI space, clearly does not care, and explicitly
mentions (in a comment) that relocatable images with no base relocations
are perfectly fine, as long as they don't have the RELOCS_STRIPPED
attribute set (which is not the case for our PE/COFF image)
So simply remove the .reloc section altogether.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-10-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Bring the PE/COFF header in line with the PE/COFF spec, by setting
NumberOfSymbols to 0, and removing the section alignment flags.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818194947.19347-9-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no dependency between the two, so remove the dependency in
Kconfig files.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The BPI-M3 is an Allwinner A83T based SBC in the Bananapi/Bpi family.
It is roughly the same form factor as the BPI-M1+, with roughly the
same peripherals and connectors:
- 2GB LPDDR3 DRAM
- 8GB eMMC
- Micro-SD card slot
- HDMI output
- Headset (stereo + mic) jack
- Onboard mic
- Gigabit Ethernet with RTL8211E transceiver
- Ampak AP6212 WiFi + BT
- USB OTG connector
- USB-to-SATA bridge connected through a USB 2.0 hub
- Consumer IR receiver
- MIPI DSI LCD panel connector
- Camera interface (parallel and MIPI CSI) connector
- 3 LEDs (Red, Green, Blue), of which 2 are controllable (GB)
- Raspberry Pi 2 compatible GPIO header
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
RV1108 EVB uses pwm0 modulate the backlight, add dt
node to enable it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
can wait for the merge window as we have not seemed to hit
any of these so far:
- Fix error handling in omap_ocp2scp_probe affecting runtime
PM error path
- Drop broken RPM status update for omap_device
- Two fixes for of_irq_get() usage that can return 0
-----BEGIN PGP SIGNATURE-----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=+wbL
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
Pull "non-urgent fixes for omaps for v4.14" from Tony Lindgren:
Non-urgent fixes for omaps for v4.14 merge window. These all
can wait for the merge window as we have not seemed to hit
any of these so far:
- Fix error handling in omap_ocp2scp_probe affecting runtime
PM error path
- Drop broken RPM status update for omap_device
- Two fixes for of_irq_get() usage that can return 0
* tag 'omap-for-v4.14/fixes-not-urgent-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: PRM: fix of_irq_get() result checks
ARM: OMAP3+: PRM: fix of_irq_get() result check
ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq
bus: omap-ocp2scp: Fix error handling in omap_ocp2scp_probe
Contains a single fix for platforms with more than 2 GiB of memory
running on a kernel with LPAE enabled.
-----BEGIN PGP SIGNATURE-----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=1dt0
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "ARM: tegra: Changes for v4.14-rc1" from Thierry Reding:
Contains a single fix for platforms with more than 2 GiB of memory
running on a kernel with LPAE enabled.
* tag 'tegra-for-4.14-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Select appropriate DMA options for LPAE
Contains a fix for unbalanced reference counting of device tree nodes in
the PMC-based generic power domains code.
A second change moves the SoC device registration code from its old
location in arch/arm/mach-tegra to drivers/soc/tegra so that it can be
shared between 32-bit and 64-bit ARM Tegra SoCs.
-----BEGIN PGP SIGNATURE-----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=Qbm4
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
Pull "soc/tegra: Changes for v4.14-rc1" from Thierry Reding:
Contains a fix for unbalanced reference counting of device tree nodes in
the PMC-based generic power domains code.
A second change moves the SoC device registration code from its old
location in arch/arm/mach-tegra to drivers/soc/tegra so that it can be
shared between 32-bit and 64-bit ARM Tegra SoCs.
* tag 'tegra-for-4.14-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Register SoC device
soc/tegra: Fix bad of_node_put() in powergate init
dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Enable second CPU core on RZ/G1M (r8a7743)
The RZ/G1M has two CA15 cores running at up to 1.5GHz
* Enable frequency scaling on RZ/G1M (r8a7743)
* Add six I2C cores to RZ/G1M (r8a7743) SoC DT
This is a step towards enabling these cores on boards that use this SoC
* Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch
Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed
clock for the CEC block. Specify this in the dts to enable CEC support."
* Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2
pins to SK-RZG1E board.
This allows the kernel to control multiplexed pins for Ethernet
and SCIF2 rather than relying on setup inherited at boot.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G9vX
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.14" from Simon Horman:
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Enable second CPU core on RZ/G1M (r8a7743)
The RZ/G1M has two CA15 cores running at up to 1.5GHz
* Enable frequency scaling on RZ/G1M (r8a7743)
* Add six I2C cores to RZ/G1M (r8a7743) SoC DT
This is a step towards enabling these cores on boards that use this SoC
* Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch
Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed
clock for the CEC block. Specify this in the dts to enable CEC support."
* Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2
pins to SK-RZG1E board.
This allows the kernel to control multiplexed pins for Ethernet
and SCIF2 rather than relying on setup inherited at boot.
* tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7791: Use R-Car SATA Gen2 fallback compat string
ARM: dts: r8a7790: Use R-Car SATA Gen2 fallback compat string
ARM: dts: r8a7743: Add OPP table for frequency scaling
ARM: dts: r8a7743: Add APMU node and second CPU core
ARM: dts: koelsch: Add CEC clock for HDMI transmitter
ARM: dts: sk-rzg1e: add Ether pins
ARM: dts: sk-rzg1e: add SCIF2 pins
ARM: dts: r8a7745: add PFC support
ARM: dts: r8a7743: Add I2C DT support
One fix for Tegra124 to hook the host1x device up with the SMMU.
The remainder of this enables USB device mode on a couple of boards
where the port is currently unused.
-----BEGIN PGP SIGNATURE-----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=0VoF
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.14-rc1" from Thierry Reding:
One fix for Tegra124 to hook the host1x device up with the SMMU.
The remainder of this enables USB device mode on a couple of boards
where the port is currently unused.
* tag 'tegra-for-4.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable UDC on AC100
ARM: tegra: Enable UDC on Jetson TK1
ARM: tegra: Enable UDC on Dalmore
ARM: tegra: Enable UDC on Beaver
ARM: tegra: Register host1x node with IOMMU binding on Tegra124
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots'.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloxmAAoJEFBXWFqHsHzOmiYH/3dBPc18iMgsEjHJ73FUJCb8
RvIxN/o4W60Kokm+vsrNHx3LfZYUCfgQCeHlYCHpL1jFGpwD0DBxNQ9QlMDG+TCa
IN+c32aB0a0U0RHl+c5jKLqPy4eVvD4NNDWGVpwjSpK/MARrsKjhEwr/Yjcrj87c
+miIiXBmTsUhzwXQF1UkK719rXI7tgZQNqO06qxJN0QxwKajZPyZzRbe1kgI1xQK
k7F8WG3OGxyRJYRt/qnovnCv7lDX1Jk4S0ySqhocEyyqkqUOXElRARWZOyP3D8CY
wJQIHRzlM/ffqDpbQDa17YuGmnMgsHZ/+Fa8tHvdL353Ow0TM6KkjoRGTd8F4GI=
=WoGP
-----END PGP SIGNATURE-----
Merge tag 'zte-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "ZTE device tree updates for 4.14" from Shawn Guo:
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots'.
* tag 'zte-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: zte: remove num-slots from zx296702-ad1
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloV7AAoJEFBXWFqHsHzOeIAH/ieM8fZEeUHO9waD4aoQJulp
kQHbJFKlEaQrB/y9LVUmNae0w/dpOaf5k/NVtfLQAZQhMqN6Y9XFQA0fnUAgiNbs
fknQpL6VnrO7nGUDEbIUommrRDPEVN9SEiiPpLpD938QjUDxTAibb8++QQOHC/S6
NLQbYMvubDTaUXkOiRodLQU6U/RQ5Byzmu+ytuKjlB1la0OzMegebD/OMXZtgysx
hcEDVBIEZmQO1TPrl5p6IZjjdHs1ua4gfRLQWq1RPXECakHJuyCPKILibyRID15j
w0C+sTxP1uIN950VYzufrbLIdyheWHSrx0FZSWa7tnus8W+h8kBAUd6NxyHLiyU=
=0Cwx
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree updates for 4.14" from Shawn Guo:
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
* tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
ARM: dts: imx6q-bx50v3: Enable i2c recovery mechanism
ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board
ARM: dts: imx6: add support for Toradex Ixora V1.1 carrier board
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: use i2c from dwc hdmi
ARM: dts: imx6q-apalis-ixora: add camera i2c bus definition
ARM: dts: imx6q-apalis-ixora: get rid of obsolete fusion comment
ARM: dts: imx6qdl-apalis: reword cam i2c comment
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: get rid of tegra legacy gen1_i2c comment
ARM: dts: imx6q-apalis-ixora: combine aliases
ARM: dts: imx6qdl-apalis: split usdhc1 pinctrl to support 4- and 8-bit
ARM: dts: imx6q-apalis-ixora: fix usdhc2 pinctrl property
ARM: dts: imx6ul-liteboard: Support poweroff
ARM: dts: imx: add CX9020 Embedded PC device tree
ARM: dts: imx53: add alternative UART2 configuration
ARM: dts: imx53: add srtc node
dt-bindings: arm: Add entry for Beckhoff CX9020
ARM: dts: i.MX25: add RNGB node to dtsi
ARM: dts: imx6ul-14x14-evk: Remove unrelated pin from ENET group
ARM: dts: imx7d-sdb: Add flexcan support
ARM: dts: imx7-colibri: add NAND support
...
Linus Torvalds