Rename tpm2_* to tpm_* and move the definitions to include/linux/tpm.h so
that these can be used by other kernel subsystems (e.g. IMA).
Also, set the length of the digest array in tpm_digest to a new constant
named TPM_MAX_DIGEST_SIZE, equal to SHA512_DIGEST_SIZE.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch renames active_banks (member of tpm_chip) to allocated_banks,
stores the number of allocated PCR banks in nr_allocated_banks (new member
of tpm_chip), and replaces the static array with a pointer to a dynamically
allocated array.
tpm2_get_pcr_allocation() determines if a PCR bank is allocated by checking
the mask in the TPML_PCR_SELECTION structure returned by the TPM for
TPM2_Get_Capability(). If a bank is not allocated, the TPM returns that
bank in TPML_PCR_SELECTION, with all bits in the mask set to zero. In this
case, the bank is not included in chip->allocated_banks, to avoid that TPM
driver users unnecessarily calculate a digest for that bank.
One PCR bank with algorithm set to SHA1 is always allocated for TPM 1.x.
As a consequence of the introduction of nr_allocated_banks,
tpm_pcr_extend() does not check anymore if the algorithm stored in tpm_chip
is equal to zero.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove @flags from tpm_transmit() API. It is no longer used for
anything.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Call tpm_chip_start() and tpm_chip_stop() in
* tpm_chip_register()
* tpm_class_shutdown()
* tpm_del_char_device()
* tpm_pm_suspend()
* tpm_try_get_ops() and tpm_put_ops()
* tpm2_del_space()
And remove these calls from tpm_transmit(). The core reason for this
change is that in tpm_vtpm_proxy a locality change requires a virtual
TPM command (a command made up just for that driver).
The consequence of this is that this commit removes the remaining nested
calls.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Encapsulate power gating and locality functionality to tpm_chip_start()
and tpm_chip_stop() in order to clean up the branching mess in
tpm_transmit().
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Added locking as part of tpm_try_get_ops() and tpm_put_ops() as they are
anyway used in most of the call sites except in tpmrm_release() where we
take the locks manually.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Use tpm_try_get_ops() in tpm-sysfs.c so that we can consider moving
other decorations (locking, localities, power management for example)
inside it. This direction can be of course taken only after other call
sites for tpm_transmit() have been treated in the same way.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Remove @space from tpm_transmit() API` in order to completely remove the
bound between low-level transmission functionality and TPM spaces. The
only real dependency existing is the amount of data saved before trying
to send a command to the TPM.
It doesn't really matter if we save always a bit more than needed so
this commit changes the amount saved always to be the size of the TPM
header and three handles.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Prepare and commit TPM space before and after calling tpm_transmit()
instead of doing that inside tpm_transmit(). After this change we can
remove TPM_TRANSMIT_NESTED flag from tpm2_prepare_space() and
tpm2_commit_space() and replace it with TPM_TRANSMIT_UNLOCKED.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Move tpm_validate_command() to tpm2-space.c and make it part of the
tpm2_prepare_space() flow. Make cc resolution as part of the TPM space
functionality in order to detach it from rest of the tpm_transmit()
flow.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Move locking, locality handling and power management to tpm_transmit()
in order to simplify the flow.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Encapsulate tpm_transmit() call pattern to tpm_dev_transmit() because it
is identically used from two places. Use unlocked version of
tpm_transmit() so that we are able to move the calls to
tpm2_prepare_space() and tpm2_commit_space() later on to this new
function.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Instead of accessing fields of the command header through offsets to
the raw buffer, it is a better idea to use the header struct pointer
that is already used elsewhere in the function.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Declare struct tpm_header that replaces struct tpm_input_header and
struct tpm_output_header.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
The error logging for tpm2_commit_space() is in a wrong place. This
commit moves it inside that function.
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Do not print partial list of PCRs when tpm1_pcr_read() fails but instead
return 0 from pcrs_show(). This is consistent behavior with other sysfs
functions.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Return zero when tpm_buf_init() fails as we do for other functions in
tpm-sysfs.c.
Fixes: da379f3c1d ("tpm: migrate pubek_show to struct tpm_buf")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Since we pass an initialized struct tpm_buf instance in every call site
now, it is cleaner to pass that directly to the tpm_transmit_cmd() as
the TPM command/response buffer.
Fine-tune a little bit tpm_transmit() and tpm_transmit_cmd() comments
while doing this.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Set tpm_chip->timeouts_adjusted directly in the update_timeouts
code instead of returning bool. In case of tpm read failing
print warning that the read failed and continue on.
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently tpm_transmit_cmd will print an error message if the tpm
returns something other than TPM2_RC_SUCCESS. This means that if the
tpm returns that it is testing an error message will be printed, and
this can cause confusion for the end user. So avoid printing the error
message if TPM2_RC_TESTING is the return code.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TCG defines two structures, TCG_EfiSpecIDEventStruct and TCG_PCR_EVENT2,
which contain variable-sized arrays in the middle of the definition.
Since these structures are not suitable for type casting, this patch
removes structure members after the variable-sized arrays and adds the
_head suffix to the structure name, to indicate that the renamed structures
do not contain all fields defined by TCG.
Lastly, given that variable-sized arrays are now in the last position, and
given that the size of the arrays cannot be determined in advance, this
patch also sets the size of those arrays to zero and removes the definition
of TPM2_ACTIVE_PCR_BANKS.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
It is unable to read the entry when it is the only one in
binary_bios_measurements:
00000000 00 00 00 00 08 00 00 00 c4 2f ed ad 26 82 00 cb
00000010 1d 15 f9 78 41 c3 44 e7 9d ae 33 20 00 00 00 00
00000020
This is obviously a firmware problem on my linux machine:
Manufacturer: Inspur
Product Name: SA5212M4
Version: 01
However, binary_bios_measurements should return it any way,
rather than nothing, after all its content is completely
valid.
Fixes: 55a82ab318 ("tpm: add bios measurement log")
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Reviewd-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The responsibility of tpm1_bios_measurements_start() is to walk over the
first *pos measurements, ensuring the skipped and to-be-read
measurements are not out-of-boundary.
This commit simplifies the loop by employing a do-while loop with
the necessary sanity check.
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Reviewd-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Return -E2BIG when the transfer is incomplete. The upper layer does
not retry, so not doing that is incorrect behaviour.
Cc: stable@vger.kernel.org
Fixes: a2871c62e1 ("tpm: Add support for Atmel I2C TPMs")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
The send() callback should never return length as it does not in every
driver except tpm_crb in the success case. The reason is that the main
transmit functionality only cares about whether the transmit was
successful or not and ignores the count completely.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
* Rename TPM_BUFSIZE defined in drivers/char/tpm/st33zp24/st33zp24.h to
ST33ZP24_BUFSIZE.
* Rename TPM_BUFSIZE defined in drivers/char/tpm/tpm_i2c_infineon.c to
TPM_I2C_INFINEON_BUFSIZE.
* Rename TPM_RETRY in tpm_i2c_nuvoton to TPM_I2C_RETRIES.
* Remove TPM_HEADER_SIZE from tpm_i2c_nuvoton.
Cc: stable@vger.kernel.org
Fixes: bf38b87108 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
Fixes: aad628c1d9 ("char/tpm: Add new driver for Infineon I2C TIS TPM")
Fixes: 32d33b29ba ("TPM: Retry SaveState command in suspend path")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The current approach to read first 6 bytes from the response and then tail
of the response, can cause the 2nd memcpy_fromio() to do an unaligned read
(e.g. read 32-bit word from address aligned to a 16-bits), depending on how
memcpy_fromio() is implemented. If this happens, the read will fail and the
memory controller will fill the read with 1's.
This was triggered by 170d13ca3a, which should be probably refined to
check and react to the address alignment. Before that commit, on x86
memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right
thing (from tpm_crb's perspective) for us so far, but we should not rely on
that. Thus, it makes sense to fix this also in tpm_crb, not least because
the fix can be then backported to stable kernels and make them more robust
when compiled in differing environments.
Cc: stable@vger.kernel.org
Cc: James Morris <jmorris@namei.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Currently to read a response from the TPM device an application needs
provide big enough buffer for the whole response and read it in one go.
The application doesn't know how big the response it beforehand so it
always needs to maintain a 4K buffer and read the max (4K).
In case if the user of the TSS library doesn't provide big enough
buffer the TCTI spec says that the library should set the required
size and return TSS2_TCTI_RC_INSUFFICIENT_BUFFER error code so that the
application could allocate a bigger buffer and call receive again.
To make it possible in the TSS library, this requires being able to do
partial reads from the driver.
The library would read the 10 bytes header first to get the actual size
of the response from the header, and then read the rest of the response.
This patch adds support for partial reads, i.e. the user can read the
response in one or multiple reads, until the whole response is consumed.
The user can also read only part of the response and ignore
the rest by issuing a new write to send a new command.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove redundant lines in the kdoc:
Fixes kdoc warnings:
drivers/char/tpm/tpm_ibmvtpm.c:42: warning: Cannot understand *
on line 42 - I thought it was a doc line
drivers/char/tpm/tpm_ibmvtpm.c:57: warning: Cannot understand *
on line 57 - I thought it was a doc line
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
kdoc for tpm2_flush_context_cmd() was off.
Fixes: 9aa36b399a ("tpm: export tpm2_flush_context_cmd")'
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
First, rename out_no_locality to out_locality for bailing out on
both tpm_cmd_ready() and tpm_request_locality() failure.
Second, ignore the return value of go_to_idle() as it may override
the return value of the actual tpm operation, the go_to_idle() error
will be caught on any consequent command.
Last, fix the wrong 'goto out', that jumped back instead of forward.
Cc: stable@vger.kernel.org
Fixes: 627448e85c ("tpm: separate cmd_ready/go_idle from runtime_pm")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The TPM specs defines PCR index as a positive number, and there is
no reason to use a signed number. It is also a possible security
issue as currently no functions check for a negative index,
which may become a large number when converted to u32.
Adjust the API to use u32 instead of int in all PCR related
functions.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reimplement tpm1_continue_selftest() using tpm_buf structure.
This is the last command using the old tpm_cmd_t structure
and now the structure can be removed.
Cc: Nayna Jain <nayna@linux.vnet.ibm.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In tpm1_pm_suspend() function reimplement,
TPM_ORD_SAVESTATE comamnd using tpm_buf.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Rename tpm1_pcr_read_dev to tpm1_pcr_read() to match
the counterpart tpm2_pcr_read().
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Implement tpm1_pcr_read_dev() using tpm_buf and remove
now unneeded structures from tpm.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
1. Use tpm_buf in tpm1_get_random()
2. Fix comment in tpm_get_random() so it is clear that
the function is expected to return number of random bytes.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Remove unneeded semicolon in tpm2_map_response_header()
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The commit:
"tpm_tis: further simplify calculation of ordinal duration"
left unused macros, we can drop them now.
Fixes compilation warnings:
tpm-interface.c:37:0: warning: macro "TPM_PROTECTED_COMMAND" is not used [-Wunused-macros]
tpm-interface.c:36:0: warning: macro "TSC_MAX_ORDINAL" is not used [-Wunused-macros]
tpm-interface.c:38:0: warning: macro "TPM_CONNECTION_COMMAND" is not used [-Wunused-macros]
Fixes: f728643001 ("tpm_tis: further simplify calculation of ordinal duration")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add wrapper tpm_auto_startup() to tpm-interface.c
instead of open coded decision between TPM 1.x and TPM 2.x
in tpm-chip.c
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TPM manual startup is used only from within TPM 1.x or TPM 2.x
code, hence remove tpm_startup() function from tpm-interface.c
and add two static functions implementations tpm1_startup()
and tpm2_startup() into to tpm1-cmd.c and tpm2-cmd.c respectively.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Factor out TPM 1.x suspend flow from tpm-interface.c into a new function
tpm1_pm_suspend() in tpm1-cmd.c
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move the tpm1 selftest code functions to tpm1-cmd.c
and adjust callers to use the new function names.
1. tpm_pcr_read_dev() to tpm1_pcr_read_dev().
2. tpm_continue_selftest() to tpm1_continue_selftest().
3. tpm_do_selftest() to tpm1_do_selftest()
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Factor out get random implementation from tpm-interface.c
into tpm1_get_random function in tpm1-cmd.c.
No functional changes.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
1. Move tpm_getcap to tpm1-cmd. Rename the function to tpm1_getcap.
2. Remove unused tpm_getcap_header with unused constant
as this functionality is already implemented using tpm_buf construct.
Fixes warning:
drivers/char/tpm/tpm-interface.c:452:38: warning: ‘tpm_getcap_header’ defined but not used [-Wunused-const-variable=]
static const struct tpm_input_header tpm_getcap_header = {
^~~~~~~~~~~~~~~~~
3. Drop unused TPM_DIGEST_SIZE. It's already defined in
include/linux/tpm.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move tpm1_pcr_extend to tpm1-cmd.c and remove
unused pcrextend_header structure and
EXTEND_PCR_RESULT_SIZE and EXTEND_PCR_RESULT_BODY_SIZE
defines.
Fixes warning:
drivers/char/tpm/tpm-interface.c:609:38: warning: ‘pcrextend_header’ defined but not used [-Wunused-const-variable=]
static const struct tpm_input_header pcrextend_header = {
^~~~~~~~~~~~~~~~
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Factor out tpm_get_timeouts() into tpm2_get_timeouts()
and tpm1_get_timeouts()
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add convenient wrapper for ordinal duration computation
to remove boiler plate if else statement over TPM2.
if (chip->flags & TPM_CHIP_FLAG_TPM2)
tpm2_calc_ordinal_duration(chip, ordinal);
else
tpm1_calc_ordinal_duration(chip, ordinal);
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Factor out TPM 1.x commands calculation into tpm1-cmd.c file.
and change the prefix from tpm_ to tpm1_.
No functional change is done here.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Make the tpm Makefile a bit more in order by putting
objects in one column.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
1. TPM2_CC_LAST has moved from 182 to 193
2. Convert tpm2_ordinal_duration from an array into a switch statement,
as there are not so many commands that require special duration
relative to a number of commands, the switch statement function
is called tpm2_ordinal_duration_index().
3. Fix kdoc comments for tpm2_calc_ordinal_duration().
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Functionality of the xen-tpmfront driver was lost secondary to
the introduction of xenbus multi-page support in commit ccc9d90a9a
("xenbus_client: Extend interface to support multi-page ring").
In this commit pointer to location of where the shared page address
is stored was being passed to the xenbus_grant_ring() function rather
then the address of the shared page itself. This resulted in a situation
where the driver would attach to the vtpm-stubdom but any attempt
to send a command to the stub domain would timeout.
A diagnostic finding for this regression is the following error
message being generated when the xen-tpmfront driver probes for a
device:
<3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62
<3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine
the timeouts
This fix is relevant to all kernels from 4.1 forward which is the
release in which multi-page xenbus support was introduced.
Daniel De Graaf formulated the fix by code inspection after the
regression point was located.
Fixes: ccc9d90a9a ("xenbus_client: Extend interface to support multi-page ring")
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
[boris: Updated commit message, added Fixes tag]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently the TPM driver only supports blocking calls, which doesn't allow
asynchronous IO operations to the TPM hardware.
This patch changes it and adds support for nonblocking write and a new poll
function to enable applications, which want to take advantage of this.
Tested-by: Philip Tricca <philip.b.tricca@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add a ptr to struct tpm_space to the file_priv and consolidate
of the write operations for the two interfaces.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Tested-by: Philip Tricca <philip.b.tricca@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
While having SECURITYFS enabled for the tpm subsystem is beneficial in
most cases, it is not strictly necessary to have it enabled at all.
Especially on platforms without any boot firmware integration of the TPM
(e.g. raspberry pi) it does not add any value for the tpm subsystem,
as there is no eventlog present.
By turning it from 'select' to 'imply' it still gets selected per
default, but enables users who want to save some kb of ram by turning
SECURITYFS off.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:
* Active: Security chip is functional
* Inactive: Security chip is visible, but is not functional
* Disabled: Security chip is hidden and is not functional
When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.
Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
tpm tpm0: TPM is disabled/deactivated (0x6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass! (rc=6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.
In that case the kernel log is cleaner and less confusing for users, i.e:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: TPM is disabled/deactivated (0x6)
ima: No TPM chip found, activating TPM-bypass! (rc=6)
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
When checking whether the response is large enough to be able to contain
the received random bytes in tpm_get_random() and tpm2_get_random(),
they fail to take account the header size, which should be added to the
minimum size. This commit fixes this issue.
Cc: stable@vger.kernel.org
Fixes: c659af78eb ("tpm: Check size of response before accessing data")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
As TPM_TRANSMIT_RAW always requires also not to take locks for obvious
reasons (deadlock), this commit renames the flag as TPM_TRANSMIT_NESTED
and prevents taking tpm_mutex when the flag is given to tpm_transmit().
Suggested-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Convert tpm_find_get_ops() to use tpm_default_chip() in case no chip
is passed in.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Implement tpm_default_chip() to find the first TPM chip and return it to
the caller while increasing the reference count on its device. This
function can be used by other subsystems, such as IMA, to find the system's
default TPM chip and use it for all subsequent TPM operations.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Rename tpm_chip_find_get() to tpm_find_get_ops() to more closely match
the tpm_put_ops() counter part.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Adds plumbing required for drivers based on tpm_tis to set hwrng quality.
Signed-off-by: Louis Collard <louiscollard@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The userpace expects to read the number of bytes stated in the header.
Returning the size of the buffer instead would be unexpected.
Cc: stable@vger.kernel.org
Fixes: 095531f891 ("tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented")
Signed-off-by: Ricardo Schwarzmeier <Ricardo.Schwarzmeier@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix tpm ptt initialization error:
tpm tpm0: A TPM error (378) occurred get tpm pcr allocation.
We cannot use go_idle cmd_ready commands via runtime_pm handles
as with the introduction of localities this is no longer an optional
feature, while runtime pm can be not enabled.
Though cmd_ready/go_idle provides a power saving, it's also a part of
TPM2 protocol and should be called explicitly.
This patch exposes cmd_read/go_idle via tpm class ops and removes
runtime pm support as it is not used by any driver.
When calling from nested context always use both flags:
TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve
tpm spaces and locality request recursive calls to tpm_transmit().
TPM_TRANSMIT_RAW should never be used standalone as it will fail
on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be
called from non-recursive locked contexts.
New wrappers are added tpm_cmd_ready() and tpm_go_idle() to
streamline tpm_try_transmit code.
tpm_crb no longer needs own power saving functions and can drop using
tpm_pm_suspend/resume.
This patch cannot be really separated from the locality fix.
Fixes: 888d867df4 (tpm: cmd_ready command can be issued only after granting locality)
Cc: stable@vger.kernel.org
Fixes: 888d867df4 (tpm: cmd_ready command can be issued only after granting locality)
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Locking the root adapter for __i2c_transfer will deadlock if the
device sits behind a mux-locked I2C mux. Switch to the finer-grained
i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not
sit behind a mux-locked mux, the two locking variants are equivalent.
Signed-off-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
An SPI TPM device managed directly on an embedded board using
the SPI bus and some GPIO or similar line as IRQ handler will
pass the IRQn from the TPM device associated with the SPI
device. This is already handled by the SPI core, so make sure
to pass this down to the core as well.
(The TPM core habit of using -1 to signal no IRQ is dubious
(as IRQ 0 is NO_IRQ) but I do not want to mess with that
semantic in this patch.)
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In order to make struct tpm_buf the first class object for constructing
TPM commands, migrate tpm2_get_random() to use it. In addition, removed
remaining references to struct tpm2_cmd. All of them use it to acquire
the length of the response, which can be achieved by using
tpm_buf_length().
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Nayna Jain<nayna@linux.vnet.ibm.com>
In order to make struct tpm_buf the first class object for constructing TPM
commands, migrate tpm2_get_tpm_pt() to use it.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
In order to make struct tpm_buf the first class object for constructing TPM
commands, migrate tpm2_probe() to use it.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Jay Freyensee <why2jjj.linux@gmail.com>
Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
In order to make struct tpm_buf the first class object for constructing TPM
commands, migrated tpm2_shutdown() to use it.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Tested-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
There is a race condition in tpm_common_write function allowing
two threads on the same /dev/tpm<N>, or two different applications
on the same /dev/tpmrm<N> to overwrite each other commands/responses.
Fixed this by taking the priv->buffer_mutex early in the function.
Also converted the priv->data_pending from atomic to a regular size_t
type. There is no need for it to be atomic since it is only touched
under the protection of the priv->buffer_mutex.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The TPM burstcount and status commands are supposed to return very
quickly [2][3]. This patch further reduces the TPM poll sleep time to usecs
in get_burstcount() and wait_for_tpm_stat() by calling usleep_range()
directly.
After this change, performance on a system[1] with a TPM 1.2 with an 8 byte
burstcount for 1000 extends improved from ~10.7 sec to ~7 sec.
[1] All tests are performed on an x86 based, locked down, single purpose
closed system. It has Infineon TPM 1.2 using LPC Bus.
[2] From the TCG Specification "TCG PC Client Specific TPM Interface
Specification (TIS), Family 1.2":
"NOTE : It takes roughly 330 ns per byte transfer on LPC. 256 bytes would
take 84 us, which is a long time to stall the CPU. Chipsets may not be
designed to post this much data to LPC; therefore, the CPU itself is
stalled for much of this time. Sending 1 kB would take 350 μs. Therefore,
even if the TPM_STS_x.burstCount field is a high value, software SHOULD
be interruptible during this period."
[3] From the TCG Specification 2.0, "TCG PC Client Platform TPM Profile
(PTP) Specification":
"It takes roughly 330 ns per byte transfer on LPC. 256 bytes would take
84 us. Chipsets may not be designed to post this much data to LPC;
therefore, the CPU itself is stalled for much of this time. Sending 1 kB
would take 350 us. Therefore, even if the TPM_STS_x.burstCount field is a
high value, software should be interruptible during this period. For SPI,
assuming 20MHz clock and 64-byte transfers, it would take about 120 usec
to move 256B of data. Sending 1kB would take about 500 usec. If the
transactions are done using 4 bytes at a time, then it would take about
1 msec. to transfer 1kB of data."
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Jay Freyensee <why2jjj.linux@gmail.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Use kmemdup rather than duplicating its implementation.
Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Use kmemdup rather than duplicating its implementation.
Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
If load context command returns with TPM2_RC_HANDLE or TPM2_RC_REFERENCE_H0
then we have use after free in line 114 and double free in 117.
Fixes: 4d57856a21 ("tpm2: add session handle context saving and restoring to the space code")
Cc: stable@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
tpm_try_transmit currently checks TPM status every 5 msecs between
send and recv. It does so in a loop for the maximum timeout as defined
in the TPM Interface Specification. However, the TPM may return before
5 msecs. Thus the polling interval for each iteration can be reduced,
which improves overall performance. This patch changes the polling sleep
time from 5 msecs to 1 msec.
Additionally, this patch renames TPM_POLL_SLEEP to TPM_TIMEOUT_POLL and
moves it to tpm.h as an enum value.
After this change, performance on a system[1] with a TPM 1.2 with an 8 byte
burstcount for 1000 extends improved from ~14 sec to ~10.7 sec.
[1] All tests are performed on an x86 based, locked down, single purpose
closed system. It has Infineon TPM 1.2 using LPC Bus.
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Acked-by: Jay Freyensee <why2jjj.linux@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
For certain tpm chips releasing locality can take long enough that a
subsequent call to request_locality will see the locality as being active
when the access register is read in check_locality. So check that the
locality has been released before returning from release_locality.
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reported-by: Laurent Bigonville <bigon@debian.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Laurent Bigonville <bigon@debian.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In crb_map_io() function, __crb_request_locality() is called prior
to crb_cmd_ready(), but if one of the consecutive function fails
the flow bails out instead of trying to relinquish locality.
This patch adds goto jump to __crb_relinquish_locality() on the error path.
Fixes: 888d867df4 (tpm: cmd_ready command can be issued only after granting locality)
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix spelling mistake, rename ST33ZP24_TISREGISTER_UKNOWN to
ST33ZP24_TISREGISTER_UNKNOWN
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reduce the size of tpm.h by moving eventlog declarations to a separate
header.
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Functions and structures specific to TPM1 are renamed from tpm* to tpm1*.
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Currently chip is being dereferenced by the call to dev_get_drvdata
before it is being null checked, however, chip can never be null, so
this check is misleading and redundant. Remove it.
Detected by CoverityScan, CID#1357806 ("Dereference before null check")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkkko.sakkinen@linux.intel.com>
Commit e2fb992d82 ("tpm: add retry logic") introduced a new loop to
handle the TPM2_RC_RETRY error. The loop retries the command after
sleeping for the specified time, which is incremented exponentially in
every iteration.
Unfortunately, the loop doubles the time before sleeping, causing the
initial sleep to be doubled. This patch fixes the initial sleep time.
Fixes: commit e2fb992d82 ("tpm: add retry logic")
Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Pull TPM updates from James Morris:
"This release contains only bug fixes. There are no new major features
added"
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: fix intermittent failure with self tests
tpm: add retry logic
tpm: self test failure should not cause suspend to fail
tpm2: add longer timeouts for creation commands.
tpm_crb: use __le64 annotated variable for response buffer address
tpm: fix buffer type in tpm_transmit_cmd
tpm: tpm-interface: fix tpm_transmit/_cmd kdoc
tpm: cmd_ready command can be issued only after granting locality
In the effort to remove all VLAs from the kernel[1], it is desirable to
build with -Wvla. However, this warning is overly pessimistic, in that
it is only happy with stack array sizes that are declared as constant
expressions, and not constant values. One case of this is the
evaluation of the max() macro which, due to its construction, ends up
converting constant expression arguments into a constant value result.
All attempts to rewrite this macro with __builtin_constant_p() failed
with older compilers (e.g. gcc 4.4)[2]. However, Martin Uecker,
constructed[3] a mind-shattering solution that works everywhere.
Cthulhu fhtagn!
This patch updates the min()/max() macros to evaluate to a constant
expression when called on constant expression arguments. This removes
several false-positive stack VLA warnings from an x86 allmodconfig build
when -Wvla is added:
$ diff -u before.txt after.txt | grep ^-
-drivers/input/touchscreen/cyttsp4_core.c:871:2: warning: ISO C90 forbids variable length array ‘ids’ [-Wvla]
-fs/btrfs/tree-checker.c:344:4: warning: ISO C90 forbids variable length array ‘namebuf’ [-Wvla]
-lib/vsprintf.c:747:2: warning: ISO C90 forbids variable length array ‘sym’ [-Wvla]
-net/ipv4/proc.c:403:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
-net/ipv6/proc.c:198:2: warning: ISO C90 forbids variable length array ‘buff’ [-Wvla]
-net/ipv6/proc.c:218:2: warning: ISO C90 forbids variable length array ‘buff64’ [-Wvla]
This also updates two cases where different enums were being compared
and explicitly casts them to int (which matches the old side-effect of
the single-evaluation code): one in tpm/tpm_tis_core.h, and one in
drm/drm_color_mgmt.c.
[1] https://lkml.org/lkml/2018/3/7/621
[2] https://lkml.org/lkml/2018/3/10/170
[3] https://lkml.org/lkml/2018/3/20/845
Co-Developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Co-Developed-by: Martin Uecker <Martin.Uecker@med.uni-goettingen.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
My Nuvoton 6xx in a Dell XPS-13 has been intermittently failing to work
(necessitating a reboot). The problem seems to be that the TPM gets into a
state where the partial self-test doesn't return TPM_RC_SUCCESS (meaning
all tests have run to completion), but instead returns TPM_RC_TESTING
(meaning some tests are still running in the background). There are
various theories that resending the self-test command actually causes the
tests to restart and thus triggers more TPM_RC_TESTING returns until the
timeout is exceeded.
There are several issues here: firstly being we shouldn't slow down the
boot sequence waiting for the self test to complete once the TPM
backgrounds them. It will actually make available all functions that have
passed and if it gets a failure return TPM_RC_FAILURE to every subsequent
command. So the fix is to kick off self tests once and if they return
TPM_RC_TESTING log that as a backgrounded self test and continue on. In
order to prevent other tpm users from seeing any TPM_RC_TESTING returns
(which it might if they send a command that needs a TPM subsystem which is
still under test), we loop in tpm_transmit_cmd until either a timeout or we
don't get a TPM_RC_TESTING return.
Finally, there have been observations of strange returns from a partial
test. One Nuvoton is occasionally returning TPM_RC_COMMAND_CODE, so treat
any unexpected return from a partial self test as an indication we need to
run a full self test.
[jarkko.sakkinen@linux.intel.com: cleaned up some klog messages and
dropped tpm_transmit_check() helper function from James' original
commit.]
Fixes: 2482b1bba5 ("tpm: Trigger only missing TPM 2.0 self tests")
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
TPM2 can return TPM2_RC_RETRY to any command and when it does we get
unexpected failures inside the kernel that surprise users (this is
mostly observed in the trusted key handling code). The UEFI 2.6 spec
has advice on how to handle this:
The firmware SHALL not return TPM2_RC_RETRY prior to the completion
of the call to ExitBootServices().
Implementer’s Note: the implementation of this function should check
the return value in the TPM response and, if it is TPM2_RC_RETRY,
resend the command. The implementation may abort if a sufficient
number of retries has been done.
So we follow that advice in our tpm_transmit() code using
TPM2_DURATION_SHORT as the initial wait duration and
TPM2_DURATION_LONG as the maximum wait time. This should fix all the
in-kernel use cases and also means that user space TSS implementations
don't have to have their own retry handling.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The Acer Acer Veriton X4110G has a TPM device detected as:
tpm_tis 00:0b: 1.2 TPM (device-id 0xFE, rev-id 71)
After the first S3 suspend, the following error appears during resume:
tpm tpm0: A TPM error(38) occurred continue selftest
Any following S3 suspend attempts will now fail with this error:
tpm tpm0: Error (38) sending savestate before suspend
PM: Device 00:0b failed to suspend: error 38
Error 38 is TPM_ERR_INVALID_POSTINIT which means the TPM is
not in the correct state. This indicates that the platform BIOS
is not sending the usual TPM_Startup command during S3 resume.
>From this point onwards, all TPM commands will fail.
The same issue was previously reported on Foxconn 6150BK8MC and
Sony Vaio TX3.
The platform behaviour seems broken here, but we should not break
suspend/resume because of this.
When the unexpected TPM state is encountered, set a flag to skip the
affected TPM_SaveState command on later suspends.
Cc: stable@vger.kernel.org
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: http://lkml.kernel.org/r/CAB4CAwfSCvj1cudi+MWaB5g2Z67d9DwY1o475YOZD64ma23UiQ@mail.gmail.com
Link: https://lkml.org/lkml/2011/3/28/192
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=591031
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
TPM2_CC_Create(0x153) and TPM2_CC_CreatePrimary (0x131) involve generation
of crypto keys which can be a computationally intensive task. The timeout
is set to 3min. Rather than increasing default timeout a new constant is
added, to not stall for too long on regular commands failures.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
use __le64 annotated variable for response buffer address as this is
read in little endian format form the register.
This suppresses sparse warning
drivers/char/tpm/tpm_crb.c:558:18: warning: cast to restricted __le64
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
1. The buffer cannot be const as it is used both for send and receive.
2. Drop useless casting to u8 *, as this is already a
type of 'buf' parameter, it has just masked the 'const' issue.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Fix tmp_ -> tpm_ typo and add reference to 'space' parameter
in kdoc for tpm_transmit and tpm_transmit_cmd functions.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The correct sequence is to first request locality and only after
that perform cmd_ready handshake, otherwise the hardware will drop
the subsequent message as from the device point of view the cmd_ready
handshake wasn't performed. Symmetrically locality has to be relinquished
only after going idle handshake has completed, this requires that
go_idle has to poll for the completion and as well locality
relinquish has to poll for completion so it is not overridden
in back to back commands flow.
Two wrapper functions are added (request_locality relinquish_locality)
to simplify the error handling.
The issue is only visible on devices that support multiple localities.
Fixes: 877c57d0d0 ("tpm_crb: request and relinquish locality 0")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Roberto Sassu