mirror of https://gitee.com/openkylin/linux.git
7 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Waiman Long
|
925b9cd1b8 |
locking/rwsem: Make owner store task pointer of last owning reader
Currently, when a reader acquires a lock, it only sets the RWSEM_READER_OWNED bit in the owner field. The other bits are simply not used. When debugging hanging cases involving rwsems and readers, the owner value does not provide much useful information at all. This patch modifies the current behavior to always store the task_struct pointer of the last rwsem-acquiring reader in a reader-owned rwsem. This may be useful in debugging rwsem hanging cases especially if only one reader is involved. However, the task in the owner field may not the real owner or one of the real owners at all when the owner value is examined, for example, in a crash dump. So it is just an additional hint about the past history. If CONFIG_DEBUG_RWSEMS=y is enabled, the owner field will be checked at unlock time too to make sure the task pointer value is valid. That does have a slight performance cost and so is only enabled as part of that debug option. From the performance point of view, it is expected that the changes shouldn't have any noticeable performance impact. A rwsem microbenchmark (with 48 worker threads and 1:1 reader/writer ratio) was ran on a 2-socket 24-core 48-thread Haswell system. The locking rates on a 4.19-rc1 based kernel were as follows: 1) Unpatched kernel: 543.3 kops/s 2) Patched kernel: 549.2 kops/s 3) Patched kernel (CONFIG_DEBUG_RWSEMS on): 546.6 kops/s There was actually a slight increase in performance (1.1%) in this particular case. Maybe it was caused by the elimination of a branch or just a testing noise. Turning on the CONFIG_DEBUG_RWSEMS option also had less than the expected impact on performance. The least significant 2 bits of the owner value are now used to designate the rwsem is readers owned and the owners are anonymous. Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1536265114-10842-1-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Waiman Long
|
d7d760efad |
locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag
There are use cases where a rwsem can be acquired by one task, but released by another task. In thess cases, optimistic spinning may need to be disabled. One example will be the filesystem freeze/thaw code where the task that freezes the filesystem will acquire a write lock on a rwsem and then un-owns it before returning to userspace. Later on, another task will come along, acquire the ownership, thaw the filesystem and release the rwsem. Bit 0 of the owner field was used to designate that it is a reader owned rwsem. It is now repurposed to mean that the owner of the rwsem is not known. If only bit 0 is set, the rwsem is reader owned. If bit 0 and other bits are set, it is writer owned with an unknown owner. One such value for the latter case is (-1L). So we can set owner to 1 for reader-owned, -1 for writer-owned. The owner is unknown in both cases. To handle transfer of rwsem ownership, the higher level code should set the owner field to -1 to indicate a write-locked rwsem with unknown owner. Optimistic spinning will be disabled in this case. Once the higher level code figures who the new owner is, it can then set the owner field accordingly. Tested-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Y. Ts'o <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Waiman Long
|
5149cbac42 |
locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches
For a rwsem, locking can either be exclusive or shared. The corresponding exclusive or shared unlock must be used. Otherwise, the protected data structures may get corrupted or the lock may be in an inconsistent state. In order to detect such anomaly, a new configuration option DEBUG_RWSEMS is added which can be enabled to look for such mismatches and print warnings that that happens. Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1522445280-7767-2-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Greg Kroah-Hartman
|
b24413180f |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Waiman Long
|
fb6a44f33b |
locking/rwsem: Protect all writes to owner by WRITE_ONCE()
Without using WRITE_ONCE(), the compiler can potentially break a write into multiple smaller ones (store tearing). So a read from the same data by another task concurrently may return a partial result. This can result in a kernel crash if the data is a memory address that is being dereferenced. This patch changes all write to rwsem->owner to use WRITE_ONCE() to make sure that store tearing will not happen. READ_ONCE() may not be needed for rwsem->owner as long as the value is only used for comparison and not dereferencing. Signed-off-by: Waiman Long <Waiman.Long@hpe.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Douglas Hatch <doug.hatch@hpe.com> Cc: Jason Low <jason.low2@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1463534783-38814-3-git-send-email-Waiman.Long@hpe.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Waiman Long
|
19c5d690e4 |
locking/rwsem: Add reader-owned state to the owner field
Currently, it is not possible to determine for sure if a reader
owns a rwsem by looking at the content of the rwsem data structure.
This patch adds a new state RWSEM_READER_OWNED to the owner field
to indicate that readers currently own the lock. This enables us to
address the following 2 issues in the rwsem optimistic spinning code:
1) rwsem_can_spin_on_owner() will disallow optimistic spinning if
the owner field is NULL which can mean either the readers own
the lock or the owning writer hasn't set the owner field yet.
In the latter case, we miss the chance to do optimistic spinning.
2) While a writer is waiting in the OSQ and a reader takes the lock,
the writer will continue to spin when out of the OSQ in the main
rwsem_optimistic_spin() loop as the owner field is NULL wasting
CPU cycles if some of readers are sleeping.
Adding the new state will allow optimistic spinning to go forward as
long as the owner field is not RWSEM_READER_OWNED and the owner is
running, if set, but stop immediately when that state has been reached.
On a 4-socket Haswell machine running on a 4.6-rc1 based kernel, the
fio test with multithreaded randrw and randwrite tests on the same
file on a XFS partition on top of a NVDIMM were run, the aggregated
bandwidths before and after the patch were as follows:
Test BW before patch BW after patch % change
---- --------------- -------------- --------
randrw 988 MB/s 1192 MB/s +21%
randwrite 1513 MB/s 1623 MB/s +7.3%
The perf profile of the rwsem_down_write_failed() function in randrw
before and after the patch were:
19.95% 5.88% fio [kernel.vmlinux] [k] rwsem_down_write_failed
14.20% 1.52% fio [kernel.vmlinux] [k] rwsem_down_write_failed
The actual CPU cycles spend in rwsem_down_write_failed() dropped from
5.88% to 1.52% after the patch.
The xfstests was also run and no regression was observed.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jason Low <jason.low2@hp.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1463534783-38814-2-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
Davidlohr Bueso
|
7a215f89a0 |
locking/rwsem: Set lock ownership ASAP
In order to optimize the spinning step, we need to set the lock owner as soon as the lock is acquired; after a successful counter cmpxchg operation, that is. This is particularly useful as rwsems need to set the owner to nil for readers, so there is a greater chance of falling out of the spinning. Currently we only set the owner much later in the game, in the more generic level -- latency can be specially bad when waiting for a node->next pointer when releasing the osq in up_write calls. As such, update the owner inside rwsem_try_write_lock (when the lock is obtained after blocking) and rwsem_try_write_lock_unqueued (when the lock is obtained while spinning). This requires creating a new internal rwsem.h header to share the owner related calls. Also cleanup some headers for mutex and rwsem. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jason Low <jason.low2@hp.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1422609267-15102-4-git-send-email-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |