Commit Graph

121 Commits

Author SHA1 Message Date
Steven Rostedt (Red Hat) 09a5059aa1 tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The ftrace_trigger_soft_disabled() tests if a
trace_event is soft disabled (called but not traced), and returns true if
it is. It has nothing to do with function tracing and should be renamed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 15:25:39 -04:00
Steven Rostedt (Red Hat) 2425bcb924 tracing: Rename ftrace_event_{call,class} to trace_event_{call,class}
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structures ftrace_event_call and
ftrace_event_class have nothing to do with the function hooks, and are
really trace_event structures. Rename ftrace_event_* to trace_event_*.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:06:10 -04:00
Steven Rostedt (Red Hat) 7f1d2f8210 tracing: Rename ftrace_event_file to trace_event_file
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structure ftrace_event_file is really
about trace events and not "ftrace". Rename it to trace_event_file.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:16 -04:00
Peter Zijlstra (Intel) 86038c5ea8 perf: Avoid horrible stack usage
Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.

The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.

Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.

This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.

Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.

We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).

One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 15:11:45 +01:00
Linus Torvalds a7c180aa7e As the merge window is still open, and this code was not as complex
as I thought it might be. I'm pushing this in now.
 
 This will allow Thomas to debug his irq work for 3.20.
 
 This adds two new features:
 
 1) Allow traceopoints to be enabled right after mm_init(). By passing
 in the trace_event= kernel command line parameter, tracepoints can be
 enabled at boot up. For debugging things like the initialization of
 interrupts, it is needed to have tracepoints enabled very early. People
 have asked about this before and this has been on my todo list. As it
 can be helpful for Thomas to debug his upcoming 3.20 IRQ work, I'm
 pushing this now. This way he can add tracepoints into the IRQ set up
 and have users enable them when things go wrong.
 
 2) Have the tracepoints printed via printk() (the console) when they
 are triggered. If the irq code locks up or reboots the box, having the
 tracepoint output go into the kernel ring buffer is useless for
 debugging. But being able to add the tp_printk kernel command line
 option along with the trace_event= option will have these tracepoints
 printed as they occur, and that can be really useful for debugging
 early lock up or reboot problems.
 
 This code is not that intrusive and it passed all my tests. Thomas tried
 them out too and it works for his needs.
 
  Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUjv3kAAoJEEjnJuOKh9ldLNsIANAe5EmDCBw0WjR72n+G3qOH
 NC8calXfkjqHU0bv8Q3dRv20KH4MHOy6l4+EiV9/ovt71LOF3NEyUJ3HuShf9a8b
 sWcUhYbX3D1hViQe5sOzv9AWhBCFlKQGoNmQnydX9xa8ivRsBaTGJIGktWlHcwBE
 jF1i3fj3l3vRQSS8qZFXp3bzreunlGyPoSHcT6eWQeos+utj4sKwQWTLXTLQeM+6
 oQtFKRx7E5yX04qO1qFczS8qIEC6JH2C2jIRYEKUGepaELlnGkb8O7jQV/RaLF4/
 6P8VhZFG9YLS7fn7vWu0SnAN+Zwz5LzgjXAZt0FhGtIhLc18Oj8ouHH1UORsdQM=
 =Z4Un
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "As the merge window is still open, and this code was not as complex as
  I thought it might be.  I'm pushing this in now.

  This will allow Thomas to debug his irq work for 3.20.

  This adds two new features:

  1) Allow traceopoints to be enabled right after mm_init().

     By passing in the trace_event= kernel command line parameter,
     tracepoints can be enabled at boot up.  For debugging things like
     the initialization of interrupts, it is needed to have tracepoints
     enabled very early.  People have asked about this before and this
     has been on my todo list.  As it can be helpful for Thomas to debug
     his upcoming 3.20 IRQ work, I'm pushing this now.  This way he can
     add tracepoints into the IRQ set up and have users enable them when
     things go wrong.

  2) Have the tracepoints printed via printk() (the console) when they
     are triggered.

     If the irq code locks up or reboots the box, having the tracepoint
     output go into the kernel ring buffer is useless for debugging.
     But being able to add the tp_printk kernel command line option
     along with the trace_event= option will have these tracepoints
     printed as they occur, and that can be really useful for debugging
     early lock up or reboot problems.

  This code is not that intrusive and it passed all my tests.  Thomas
  tried them out too and it works for his needs.

   Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org"

* tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Add tp_printk cmdline to have tracepoints go to printk()
  tracing: Move enabling tracepoints to just after rcu_init()
2014-12-16 12:53:59 -08:00
Steven Rostedt (Red Hat) 5f893b2639 tracing: Move enabling tracepoints to just after rcu_init()
Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after RCU has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after rcu_init().

This also allows trace_printk() to be used early too.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.org

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-15 10:16:50 -05:00
Linus Torvalds 1dd7dcb6ea There was a lot of clean ups and minor fixes. One of those clean ups was
to the trace_seq code. It also removed the return values to the
 trace_seq_*() functions and use trace_seq_has_overflowed() to see if
 the buffer filled up or not. This is similar to work being done to the
 seq_file code as well in another tree.
 
 Some of the other goodies include:
 
  o Added some "!" (NOT) logic to the tracing filter.
 
  o Fixed the frame pointer logic to the x86_64 mcount trampolines
 
  o Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
    That is, the ftrace trampoline can be dynamically allocated
    and be called directly by functions that only have a single hook
    to them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUhbLGAAoJEEjnJuOKh9ldRV4H/3NcLbgGB2iu96la1zdYE6pG
 Q7cDJMxXK80YIIL70h9G0IItcD4t62LMb72lfBnMGRj3msgFb3AgISW57EuI0Pxk
 xk24wuIPoTG2S7v9sc3SboNFwO8qbtIjxD2OBmqIUrGo2sZIiGjyj3gX7mCY3uzL
 WB2bUOSFz/22OgaANinR5EELHA3pZZCf54Vz1K9ndmtK0xp0j1a7xJShD6TrMdYv
 mZ3zH5ViIhW4A3mdcMceh6fy2JLQAiEKF0uPTvcMMz7NlVul0mxyL/+10P7AE/3R
 Ehw4fzmm4NDshPDtBOkKH0LsppgXzuItFuQUTpact3JlqTg++bV6onSsrkt1hlY=
 =Z7Cm
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "There was a lot of clean ups and minor fixes.  One of those clean ups
  was to the trace_seq code.  It also removed the return values to the
  trace_seq_*() functions and use trace_seq_has_overflowed() to see if
  the buffer filled up or not.  This is similar to work being done to
  the seq_file code as well in another tree.

  Some of the other goodies include:

   - Added some "!" (NOT) logic to the tracing filter.

   - Fixed the frame pointer logic to the x86_64 mcount trampolines

   - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
     That is, the ftrace trampoline can be dynamically allocated and be
     called directly by functions that only have a single hook to them"

* tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits)
  tracing: Truncated output is better than nothing
  tracing: Add additional marks to signal very large time deltas
  Documentation: describe trace_buf_size parameter more accurately
  tracing: Allow NOT to filter AND and OR clauses
  tracing: Add NOT to filtering logic
  ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter
  ftrace/x86: Get rid of ftrace_caller_setup
  ftrace/x86: Have save_mcount_regs macro also save stack frames if needed
  ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs
  ftrace/x86: Simplify save_mcount_regs on getting RIP
  ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter
  ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments
  ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file
  ftrace/x86: Have static tracing also use ftrace_caller_setup
  ftrace/x86: Have static function tracing always test for function graph
  kprobes: Add IPMODIFY flag to kprobe_ftrace_ops
  ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict
  kprobes/ftrace: Recover original IP if pre_handler doesn't change it
  tracing/trivial: Fix typos and make an int into a bool
  tracing: Deletion of an unnecessary check before iput()
  ...
2014-12-10 19:58:13 -08:00
Steven Rostedt (Red Hat) 183742f08c tracing: Do not use return values of trace_seq_printf() in syscall tracing
The functions trace_seq_printf() and friends will not be returning values
soon and will be void functions. To know if they succeeded or not, the
functions trace_seq_has_overflowed() and trace_handle_return() should be
used instead.

Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-19 15:25:46 -05:00
Rabin Vincent 086ba77a6d tracing/syscalls: Ignore numbers outside NR_syscalls' range
ARM has some private syscalls (for example, set_tls(2)) which lie
outside the range of NR_syscalls.  If any of these are called while
syscall tracing is being performed, out-of-bounds array access will
occur in the ftrace and perf sys_{enter,exit} handlers.

 # trace-cmd record -e raw_syscalls:* true && trace-cmd report
 ...
 true-653   [000]   384.675777: sys_enter:            NR 192 (0, 1000, 3, 4000022, ffffffff, 0)
 true-653   [000]   384.675812: sys_exit:             NR 192 = 1995915264
 true-653   [000]   384.675971: sys_enter:            NR 983045 (76f74480, 76f74000, 76f74b28, 76f74480, 76f76f74, 1)
 true-653   [000]   384.675988: sys_exit:             NR 983045 = 0
 ...

 # trace-cmd record -e syscalls:* true
 [   17.289329] Unable to handle kernel paging request at virtual address aaaaaace
 [   17.289590] pgd = 9e71c000
 [   17.289696] [aaaaaace] *pgd=00000000
 [   17.289985] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
 [   17.290169] Modules linked in:
 [   17.290391] CPU: 0 PID: 704 Comm: true Not tainted 3.18.0-rc2+ #21
 [   17.290585] task: 9f4dab00 ti: 9e710000 task.ti: 9e710000
 [   17.290747] PC is at ftrace_syscall_enter+0x48/0x1f8
 [   17.290866] LR is at syscall_trace_enter+0x124/0x184

Fix this by ignoring out-of-NR_syscalls-bounds syscall numbers.

Commit cd0980fc8a "tracing: Check invalid syscall nr while tracing syscalls"
added the check for less than zero, but it should have also checked
for greater than NR_syscalls.

Link: http://lkml.kernel.org/p/1414620418-29472-1-git-send-email-rabin@rab.in

Fixes: cd0980fc8a "tracing: Check invalid syscall nr while tracing syscalls"
Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-30 20:58:38 -04:00
Andreea-Cristina Bernat fb5a613b4f kernel: trace_syscalls: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
The uses of "rcu_assign_pointer()" are NULLing out the pointers.
According to RCU_INIT_POINTER()'s block comment:
"1.   This use of RCU_INIT_POINTER() is NULLing out the pointer"
it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.

The following Coccinelle semantic patch was used:
@@
@@

- rcu_assign_pointer
+ RCU_INIT_POINTER
  (..., NULL)

Link: http://lkml.kernel.org/p/20140822142822.GA32391@ada

Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-09-10 10:48:47 -04:00
Steven Rostedt (Red Hat) 13a1e4aef5 tracing: Consolidate event trigger code
The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.

Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.

Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.home

Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-09 21:20:07 -05:00
Tom Zanussi 4bf0566db1 tracing: Remove double-underscore naming in syscall trigger invocations
There's no reason to use double-underscores for any variable name in
ftrace_syscall_enter()/exit(), since those functions aren't generated
and there's no need to avoid namespace collisions as with the event
macros, which is where the original invocation code came from.

Link: http://lkml.kernel.org/r/0b489c9d1f7ee315cff60fa0e4c2b433ade8ae0d.1389036657.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-06 15:22:07 -05:00
Tom Zanussi bac5fb97a1 tracing: Add and use generic set_trigger_filter() implementation
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.

Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger.  For example, to add a filter to an
enable/disable_event command:

    echo 'enable_event:system:event if common_pid == 999' > \
              .../othersys/otherevent/trigger

The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.

As another example, to add a filter to a stacktrace command:

    echo 'stacktrace if common_pid == 999' > \
                   .../somesys/someevent/trigger

The above command will only trigger a stacktrace if the common_pid
field in the event is 999.

The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.

Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.

There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.

There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers.  To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger.  Once all commands have been either invoked or set their
return flag, event_triggers_call() returns.  The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().

To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.

The syscall event invocation code is also changed in analogous ways.

Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.

Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:17 -05:00
Tom Zanussi 85f2b08268 tracing: Add basic event trigger framework
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.

'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.

The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.

The event trigger functionality is built on top of SOFT_DISABLE
functionality.  It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires.  Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that.  Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function.  Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.

The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.

The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.

The standard open, read, and release file operations are implemented
here.

The open() implementation sets up for the various open modes of the
'trigger' file.  It creates and attaches the trigger iterator and sets
up the command parser.  If opened for reading set up the trigger
seq_ops.

The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.

The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.

A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.

also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.

A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations.  They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.

The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event.  It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.

Every event_command func() implementation essentially does the
same thing for any command:

   - choose ops - use the value of param to choose either a number or
     count version of event_trigger_ops specific to the command
   - do the register or unregister of those ops
   - associate a filter, if specified, with the triggering event

The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized.  When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite.  The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.

Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.

The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions.  This allows func()
implementations to use command-specific blobs and supports code
re-use.

The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked.  The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.

This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.

Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-20 18:40:22 -05:00
Steven Rostedt 3ccb012392 tracing: Only run synchronize_sched() at instance deletion time
It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.

This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.

The synchornize_sched() was added with d562aff93b "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).

The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.

Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.

Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home

Reported-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-05 14:22:30 -05:00
Tom Zanussi d562aff93b tracing: Add support for SOFT_DISABLE to syscall events
The original SOFT_DISABLE patches didn't add support for soft disable
of syscall events; this adds it.

Add an array of ftrace_event_file pointers indexed by syscall number
to the trace array and remove the existing enabled bitmaps, which as a
result are now redundant.  The ftrace_event_file structs in turn
contain the soft disable flags we need for per-syscall soft disable
accounting.

Adding ftrace_event_files also means we can remove the USE_CALL_FILTER
bit, thus enabling multibuffer filter support for syscall events.

Link: http://lkml.kernel.org/r/6e72b566e85d8df8042f133efbc6c30e21fb017e.1382620672.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-05 17:48:49 -05:00
Tom Zanussi f306cc82a9 tracing: Update event filters for multibuffer
The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:

Before:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 2048
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.

After:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters.  For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.

The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).

Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-05 16:50:20 -05:00
Li Zefan 3ddc77f6f4 tracing/syscalls: Annotate raw_init function with __init
init_syscall_trace() can only be called during kernel bootup only, so we can
mark it and the functions it calls as __init.

Link: http://lkml.kernel.org/r/51528E89.6080508@huawei.com

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-08-21 22:24:52 -04:00
Oleg Nesterov cd92bf61d6 tracing/perf: Move the PERF_MAX_TRACE_SIZE check into perf_trace_buf_prepare()
Every perf_trace_buf_prepare() caller does
WARN_ONCE(size > PERF_MAX_TRACE_SIZE, message) and "message" is
almost the same.

Shift this WARN_ONCE() into perf_trace_buf_prepare(). This changes
the meaning of _ONCE, but I think this is fine.

	- 4947014 2932448 10104832  17984294  1126b26 vmlinux
	+ 4948422 2932448 10104832  17985702  11270a6 vmlinux

on my build.

Link: http://lkml.kernel.org/r/20130617170211.GA19813@redhat.com

Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18 21:31:28 -04:00
Oleg Nesterov 421c7860c6 tracing/syscall: Avoid perf_trace_buf_*() if sys_data->perf_events is empty
perf_trace_buf_prepare() + perf_trace_buf_submit(head, task => NULL)
make no sense if hlist_empty(head). Change perf_syscall_enter/exit()
to check sys_data->{enter,exit}_event->perf_events beforehand.

Link: http://lkml.kernel.org/r/20130617170207.GA19806@redhat.com

Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18 21:31:28 -04:00
zhangwei(Jovi) 146c3442f2 tracing: Use trace_seq_puts()/trace_seq_putc() where possible
For string without format specifiers, use trace_seq_puts()
or trace_seq_putc().

Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18 21:30:36 -04:00
zhangwei(Jovi) 11034ae9c2 tracing: Fix irqs-off tag display in syscall tracing
All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't
disable irqs.

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 13/13   #P:2
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-513   [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-513   [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
         sendmail-771   [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6)

The reason is syscall tracing doesn't record irq_flags into buffer.
The proper display is:

 [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event
 [root@jovi tracing]# cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 14/14   #P:2
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-514   [001] ....    46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-514   [001] ....    46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
            <...>-920   [001] ....    47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0)

Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.com

Cc: stable@vger.kernel.org # 2.6.35
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-02 20:42:30 -04:00
zhangwei(Jovi) 36a78e9e87 tracing: Fix comment about prefix in arch_syscall_match_sym_name()
ppc64 has its own syscall prefix like ".SyS" or ".sys". Make the
comment in arch_syscall_match_sym_name() more understandable.

Link: http://lkml.kernel.org/r/513D842F.40205@huawei.com

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 13:22:09 -04:00
Steven Rostedt (Red Hat) 12883efb67 tracing: Consolidate max_tr into main trace_array structure
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:40 -04:00
Li Zefan 523c81135b tracing: Fix some section mismatch warnings
As we've added __init annotation to field-defining functions, we should
add __refdata annotation to event_call variables, which reference those
functions.

Link: http://lkml.kernel.org/r/51343C1F.2050502@huawei.com

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:54 -04:00
Li Zefan b8aae39fc5 tracing/syscalls: Annotate field-defining functions with __init
These two functions are called during kernel boot only.

Link: http://lkml.kernel.org/r/51258796.7020704@huawei.com

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:52 -04:00
Steven Rostedt 12ab74ee00 tracing: Make syscall events suitable for multiple buffers
Currently the syscall events record into the global buffer. But if
multiple buffers are in place, then we need to have syscall events
record in the proper buffers.

By adding descriptors to pass to the syscall event functions, the
syscall events can now record into the buffers that have been assigned
to them (one event may be applied to mulitple buffers).

This will allow tracing high volume syscalls along with seldom occurring
syscalls without losing the seldom syscall events.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:44 -04:00
Steven Rostedt f431b634f2 tracing/syscalls: Allow archs to ignore tracing compat syscalls
The tracing of ia32 compat system calls has been a bit of a pain as they
use different system call numbers than the 64bit equivalents.

I wrote a simple 'lls' program that lists files. I compiled it as a i686
ELF binary and ran it under a x86_64 box. This is the result:

echo 0 > /debug/tracing/tracing_on
echo 1 > /debug/tracing/events/syscalls/enable
echo 1 > /debug/tracing/tracing_on ; ./lls ; echo 0 > /debug/tracing/tracing_on

grep lls /debug/tracing/trace

[.. skipping calls before TS_COMPAT is set ...]

             lls-1127  [005] d...   936.409188: sys_recvfrom(fd: 0, ubuf: 4d560fc4, size: 0, flags: 8048034, addr: 8, addr_len: f7700420)
             lls-1127  [005] d...   936.409190: sys_recvfrom -> 0x8a77000
             lls-1127  [005] d...   936.409211: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
             lls-1127  [005] d...   936.409215: sys_lgetxattr -> 0xf76ff000
             lls-1127  [005] d...   936.409223: sys_dup2(oldfd: 4d55ae9b, newfd: 4)
             lls-1127  [005] d...   936.409228: sys_dup2 -> 0xfffffffffffffffe
             lls-1127  [005] d...   936.409236: sys_newfstat(fd: 4d55b085, statbuf: 80000)
             lls-1127  [005] d...   936.409242: sys_newfstat -> 0x3
             lls-1127  [005] d...   936.409243: sys_removexattr(pathname: 3, name: ffcd0060)
             lls-1127  [005] d...   936.409244: sys_removexattr -> 0x0
             lls-1127  [005] d...   936.409245: sys_lgetxattr(pathname: 0, name: 19614, value: 1, size: 2)
             lls-1127  [005] d...   936.409248: sys_lgetxattr -> 0xf76e5000
             lls-1127  [005] d...   936.409248: sys_newlstat(filename: 3, statbuf: 19614)
             lls-1127  [005] d...   936.409249: sys_newlstat -> 0x0
             lls-1127  [005] d...   936.409262: sys_newfstat(fd: f76fb588, statbuf: 80000)
             lls-1127  [005] d...   936.409279: sys_newfstat -> 0x3
             lls-1127  [005] d...   936.409279: sys_close(fd: 3)
             lls-1127  [005] d...   936.421550: sys_close -> 0x200
             lls-1127  [005] d...   936.421558: sys_removexattr(pathname: 3, name: ffcd00d0)
             lls-1127  [005] d...   936.421560: sys_removexattr -> 0x0
             lls-1127  [005] d...   936.421569: sys_lgetxattr(pathname: 4d564000, name: 1b1abc, value: 5, size: 802)
             lls-1127  [005] d...   936.421574: sys_lgetxattr -> 0x4d564000
             lls-1127  [005] d...   936.421575: sys_capget(header: 4d70f000, dataptr: 1000)
             lls-1127  [005] d...   936.421580: sys_capget -> 0x0
             lls-1127  [005] d...   936.421580: sys_lgetxattr(pathname: 4d710000, name: 3000, value: 3, size: 812)
             lls-1127  [005] d...   936.421589: sys_lgetxattr -> 0x4d710000
             lls-1127  [005] d...   936.426130: sys_lgetxattr(pathname: 4d713000, name: 2abc, value: 3, size: 32)
             lls-1127  [005] d...   936.426141: sys_lgetxattr -> 0x4d713000
             lls-1127  [005] d...   936.426145: sys_newlstat(filename: 3, statbuf: f76ff3f0)
             lls-1127  [005] d...   936.426146: sys_newlstat -> 0x0
             lls-1127  [005] d...   936.431748: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)

Obviously I'm not calling newfstat with a fd of 4d55b085. The calls are
obviously incorrect, and confusing.

Other efforts have been made to fix this:

https://lkml.org/lkml/2012/3/26/367

But the real solution is to rewrite the syscall internals and come up
with a fixed solution. One that doesn't require all the kluge that the
current solution has.

Thus for now, instead of outputting incorrect data, simply ignore them.
With this patch the changes now have:

 #> grep lls /debug/tracing/trace
 #>

Compat system calls simply are not traced. If users need compat
syscalls, then they should just use the raw syscall tracepoints.

For an architecture to make their compat syscalls ignored, it must
define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS (done in asm/ftrace.h) and also
define an arch_trace_is_compat_syscall() function that will return true
if the current task should ignore tracing the syscall.

I want to stress that this change does not affect actual syscalls in any
way, shape or form. It is only used within the tracing system and
doesn't interfere with the syscall logic at all. The changes are
consolidated nicely into trace_syscalls.c and asm/ftrace.h.

I had to make one small modification to asm/thread_info.h and that was
to remove the include of asm/ftrace.h. As asm/ftrace.h required the
current_thread_info() it was causing include hell. That include was
added back in 2008 when the function graph tracer was added:

 commit caf4b323 "tracing, x86: add low level support for ftrace return tracing"

It does not need to be included there.

Link: http://lkml.kernel.org/r/1360703939.21867.99.camel@gandalf.local.home

Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-02-12 17:46:28 -05:00
Fengguang Wu 6aea49cb5f tracing/syscalls: Make local functions static
Some functions in the syscall tracing is used only locally to
the file, but they are labeled global. Convert them to static functions.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-21 13:22:31 -05:00
Vaibhav Nagarnaik 6f86ab9fca tracing: Cleanup unnecessary function declarations
The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.

Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.com

Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:45:34 -04:00
Ezequiel Garcia 8781915ad2 trace: Move trace event enable from fs_initcall to core_initcall
This patch splits trace event initialization in two stages:
 * ftrace enable
 * sysfs event entry creation

This allows to capture trace events from an earlier point
by using 'trace_event' kernel parameter and is important
to trace boot-up allocations.

Note that, in order to enable events at core_initcall,
it's necessary to move init_ftrace_syscalls() from
core_initcall to early_initcall.

Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.com

Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-24 14:13:02 -04:00
Will Deacon 60916a9382 tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1
syscall_get_nr can return -1 in the case that the task is not executing
a system call.

This patch fixes perf_syscall_{enter,exit} to check that the syscall
number is valid before using it as an index into a bitmap.

Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com

Cc: Jason Baron <jbaron@redhat.com>
Cc: Wade Farnsworth <wade_farnsworth@mentor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-08-17 15:19:46 -04:00
Andrew Vagin e6dab5ffab perf/trace: Add ability to set a target task for events
A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.

Now a target task can be set by using __perf_task().

The original idea and a draft patch belongs to Peter Zijlstra.

I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.

Inspired-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-31 17:02:05 +02:00
Jiri Olsa 489c75c3b3 ftrace, perf: Add add/del tracepoint perf registration actions
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.

The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.

Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:25 -05:00
Jiri Olsa ceec0b6fc7 ftrace, perf: Add open/close tracepoint perf registration actions
Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate
register/unregister from open/close actions.

The register/unregister actions are invoked for the first/last
tracepoint user when opening/closing the event.

The open/close actions are invoked for each tracepoint user when
opening/closing the event.

Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-21 11:08:24 -05:00
Thomas Meyer 47b0edcb59 tracing/trivial: Use kcalloc instead of kzalloc to allocate array
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107

Link: http://lkml.kernel.org/r/1322600880.1534.347.camel@localhost.localdomain

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-13 13:48:11 -05:00
Paul Gortmaker 56d82e000c kernel: Add <linux/module.h> to files using it implicitly
These files are doing things like module_put and try_module_get
so they need to call out the module.h for explicit inclusion,
rather than getting it via <linux/device.h> which we ideally want
to remove the module.h inclusion from.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Ian Munsie ae07f551c4 tracing/syscalls: Early terminate search for sys_ni_syscall
Many system calls are unimplemented and mapped to sys_ni_syscall, but at
boot ftrace would still search through every syscall metadata entry for
a match which wouldn't be there.

This patch adds causes the search to terminate early if the system call
is not mapped.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-7-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-07 21:30:14 -05:00
Ian Munsie b2d5549681 tracing/syscalls: Allow arch specific syscall symbol matching
Some architectures have unusual symbol names and the generic code to
match the symbol name with the function name for the syscall metadata
will fail. For example, symbols on PPC64 start with a period and the
generic code will fail to match them.

This patch moves the match logic out into a separate function which an
arch can override by defining ARCH_HAS_SYSCALL_MATCH_SYM_NAME in
asm/ftrace.h and implementing arch_syscall_match_sym_name.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-5-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-07 21:29:03 -05:00
Ian Munsie c763ba06bd tracing/syscalls: Make arch_syscall_addr weak
Some architectures use non-trivial system call tables and will not work
with the generic arch_syscall_addr code. For example, PowerPC64 uses a
table of twin long longs.

This patch makes the generic arch_syscall_addr weak to allow
architectures with non-trivial system call tables to override it.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-4-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-07 21:26:22 -05:00
Ian Munsie 3773b389b6 tracing/syscalls: Convert redundant syscall_nr checks into WARN_ON
With the ftrace events now checking if the syscall_nr is valid upon
initialisation it should no longer be possible to register or unregister
a syscall event without a valid syscall_nr since they should not be
created. This adds a WARN_ON_ONCE in the register and unregister
functions to locate potential regressions in the future.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-3-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-07 21:25:52 -05:00
Ian Munsie ba976970c7 tracing/syscalls: Don't add events for unmapped syscalls
FTRACE_SYSCALLS would create events for each and every system call, even
if it had failed to map the system call's name with it's number. This
resulted in a number of events being created that would not behave as
expected.

This could happen, for example, on architectures who's symbol names are
unusual and will not match the system call name. It could also happen
with system calls which were mapped to sys_ni_syscall.

This patch changes the default system call number in the metadata to -1.
If the system call name from the metadata is not successfully mapped to
a system call number during boot, than the event initialisation routine
will now return an error, preventing the event from being created.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-2-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-07 21:24:44 -05:00
Steven Rostedt 3d56e331b6 tracing: Replace syscall_meta_data struct array with pointer array
Currently the syscall_meta structures for the syscall tracepoints are
placed in the __syscall_metadata section, and at link time, the linker
makes one large array of all these syscall metadata structures. On boot
up, this array is read (much like the initcall sections) and the syscall
data is processed.

The problem is that there is no guarantee that gcc will place complex
structures nicely together in an array format. Two structures in the
same file may be placed awkwardly, because gcc has no clue that they
are suppose to be in an array.

A hack was used previous to force the alignment to 4, to pack the
structures together. But this caused alignment issues with other
architectures (sparc).

Instead of packing the structures into an array, the structures' addresses
are now put into the __syscall_metadata section. As pointers are always the
natural alignment, gcc should always pack them tightly together
(otherwise initcall, extable, etc would also fail).

By having the pointers to the structures in the section, we can still
iterate the trace_events without causing unnecessary alignment problems
with other architectures, or depending on the current behaviour of
gcc that will likely change in the future just to tick us kernel developers
off a little more.

The __syscall_metadata section is also moved into the .init.data section
as it is now only needed at boot up.

Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-02-03 09:29:06 -05:00
Lai Jiangshan 7f85803a26 tracing: Remove syscall_exit_fields
There is no need for syscall_exit_fields as the syscall
exit event class can already host the fields in its structure,
like most other trace events do by default. Use that
default behavior instead.

Following this scheme, we don't need anymore to override the
get_fields() callback of the syscall exit event class either.

Hence both syscall_exit_fields and syscall_get_exit_fields() can
be removed.

Also changed some indentation to keep the following under 80
characters:

".fields		= LIST_HEAD_INIT(event_class_syscall_exit.fields),"

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D301C0E.8090408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-14 18:06:35 -05:00
Li Zefan c9642c49aa tracing: Use a global field list for all syscall exit events
All syscall exit events have the same fields.

The kernel size drops 2.5K:

   text    data     bss     dec     hex filename
7018612 2034376 7251132 16304120         f8c7f8 vmlinux.o.orig
7018612 2031888 7251132 16301632         f8be40 vmlinux.o

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3746.8070100@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-28 17:12:44 -04:00
Peter Zijlstra 3771f07711 perf_events, trace: Fix probe unregister race
tracepoint_probe_unregister() does not synchronize against the probe
callbacks, so do that explicitly. This properly serializes the callbacks
and the free of the data used therein.

Also, use this_cpu_ptr() where possible.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274438476.1674.1702.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-31 08:46:09 +02:00
Steven Rostedt ff5f149b6a Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into trace/tip/tracing/core-7
Conflicts:
	include/linux/ftrace_event.h
	include/trace/ftrace.h
	kernel/trace/trace_event_perf.c
	kernel/trace/trace_kprobe.c
	kernel/trace/trace_syscalls.c

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21 11:49:57 -04:00
Peter Zijlstra 1c024eca51 perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
Avoid the swevent hash-table by using per-tracepoint
hlists.

Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:56 +02:00
Peter Zijlstra b7e2ecef92 perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
Improves performance.

Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274259525.5605.10352.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-21 11:37:56 +02:00
Peter Zijlstra 4f41c013f5 perf/ftrace: Optimize perf/tracepoint interaction for single events
When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-18 18:35:46 +02:00