This is only noticed by people that are not doing everything correct in
the first place.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
max_desync_factor can be configured per-interface, but nothing is
using the value.
Reported-by: Piotr Lewandowski <piotr.lewandowski@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since addresses are only revalidated every 2 minutes, the reported
valid_lft can underflow shortly before the address is deleted.
Clamp it to a minimum of 0, as for prefered_lft.
Reported-by: Piotr Lewandowski <piotr.lewandowski@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't descend to wireless and ieee802154 unless they are actually used.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use "depends on" instead of "if" in Kconfig files.
Fixed CAIF debug flag, and removed unnecessary clean-* options.
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
don't clone skb when skb isn't shared
When the tcf_action is TC_ACT_STOLEN, and the skb isn't shared, we don't need
to clone a new skb. As the skb will be freed after this function returns, we
can use it freely once we get a reference to it.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
include/net/sch_generic.h | 11 +++++++++--
net/sched/act_mirred.c | 6 +++---
2 files changed, 12 insertions(+), 5 deletions(-)
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can pass a gfp argument to tso_fragment() and avoid GFP_ATOMIC
allocations sometimes.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use u64_stats_sync infrastructure to implement 64bit rx stats.
(tx stats are addressed later)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
use this_cpu_ptr(p) instead of per_cpu_ptr(p, smp_processor_id())
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allows use of ECN when syncookies are in effect by encoding ecn_ok
into the syn-ack tcp timestamp.
While at it, remove a uneeded #ifdef CONFIG_SYN_COOKIES.
With CONFIG_SYN_COOKIES=nm want_cookie is ifdef'd to 0 and gcc
removes the "if (0)".
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Fernando Gont there is no need to encode rcv_wscale
into the cookie.
We did not use the restored rcv_wscale anyway; it is recomputed
via tcp_select_initial_window().
Thus we can save 4 bits in the ts option space by removing rcv_wscale.
In case window scaling was not supported, we set the (invalid) wscale
value 0xf.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 9261e53701 (ipv6: making ip and icmp statistics per/namespace)
forgot to remove ipv6_statistics variable.
commit bc417d99bf (ipv6: remove stale MIB definitions) took care of
icmpv6_statistics & icmpv6msg_statistics
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Alexey Dobriyan <adobriyan@gmail.com>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for 64bit snmp counters for some mibs,
add an 'align' parameter to snmp_mib_init(), instead
of assuming mibs only contain 'unsigned long' fields.
Callers can use __alignof__(type) to provide correct
alignment.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is thanks to Andre Noll who reported the issue and helped testing.
The Syn-RTT sampled during the initial handshake currently only works for
the client sending the DCCP-Request. TFRC penalizes the absence of an RTT
sample with a very slow initial speed (1 packet per second), which delays
slow-start significantly, resulting in sluggish performance.
This patch mirrors the "Syn RTT" principle by adding a timestamp also onto
the DCCP-Response, producing an RTT sample when the (Data)Ack completing
the handshake arrives.
Also changed the documentation to 'TFRC' since Syn RTTs are also used by CCID-4.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes an unused 'sk' argument from several option-inserting functions.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove "pktgen: " from formats
Convert printks to pr_<level>
Added func_enter() for debugging
Moved version to end of string at module_init
Coalesced long formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gcc is currenlty not in the ability to optimize the switch statement in
sk_run_filter() because of dense case labels. This patch replace the
OR'd labels with ordered sequenced case labels. The sk_chk_filter()
function is modified to patch/replace the original OPCODES in a
ordered but equivalent form. gcc is now in the ability to transform the
switch statement in sk_run_filter into a jump table of complexity O(1).
Until this patch gcc generates a sequence of conditional branches (O(n) of 567
byte .text segment size (arch x86_64):
7ff: 8b 06 mov (%rsi),%eax
801: 66 83 f8 35 cmp $0x35,%ax
805: 0f 84 d0 02 00 00 je adb <sk_run_filter+0x31d>
80b: 0f 87 07 01 00 00 ja 918 <sk_run_filter+0x15a>
811: 66 83 f8 15 cmp $0x15,%ax
815: 0f 84 c5 02 00 00 je ae0 <sk_run_filter+0x322>
81b: 77 73 ja 890 <sk_run_filter+0xd2>
81d: 66 83 f8 04 cmp $0x4,%ax
821: 0f 84 17 02 00 00 je a3e <sk_run_filter+0x280>
827: 77 29 ja 852 <sk_run_filter+0x94>
829: 66 83 f8 01 cmp $0x1,%ax
[...]
With the modification the compiler translate the switch statement into
the following jump table fragment:
7ff: 66 83 3e 2c cmpw $0x2c,(%rsi)
803: 0f 87 1f 02 00 00 ja a28 <sk_run_filter+0x26a>
809: 0f b7 06 movzwl (%rsi),%eax
80c: ff 24 c5 00 00 00 00 jmpq *0x0(,%rax,8)
813: 44 89 e3 mov %r12d,%ebx
816: e9 43 03 00 00 jmpq b5e <sk_run_filter+0x3a0>
81b: 41 89 dc mov %ebx,%r12d
81e: e9 3b 03 00 00 jmpq b5e <sk_run_filter+0x3a0>
Furthermore, I reordered the instructions to reduce cache line misses by
order the most common instruction to the start.
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
i've found that tcp_close() can be called for an already closed
socket, but still sends reset in this case (tcp_send_active_reset())
which seems to be incorrect. Moreover, a packet with reset is sent
with different source port as original port number has been already
cleared on socket. Besides that incrementing stat counter for
LINUX_MIB_TCPABORTONCLOSE also does not look correct in this case.
Initially this issue was found on 2.6.18-x RHEL5 kernel, but the same
seems to be true for the current mainstream kernel (checked on
2.6.35-rc3). Please, correct me if i missed something.
How that happens:
1) the server receives a packet for socket in TCP_CLOSE_WAIT state
that triggers a tcp_reset():
Call Trace:
<IRQ> [<ffffffff8025b9b9>] tcp_reset+0x12f/0x1e8
[<ffffffff80046125>] tcp_rcv_state_process+0x1c0/0xa08
[<ffffffff8003eb22>] tcp_v4_do_rcv+0x310/0x37a
[<ffffffff80028bea>] tcp_v4_rcv+0x74d/0xb43
[<ffffffff8024ef4c>] ip_local_deliver_finish+0x0/0x259
[<ffffffff80037131>] ip_local_deliver+0x200/0x2f4
[<ffffffff8003843c>] ip_rcv+0x64c/0x69f
[<ffffffff80021d89>] netif_receive_skb+0x4c4/0x4fa
[<ffffffff80032eca>] process_backlog+0x90/0xec
[<ffffffff8000cc50>] net_rx_action+0xbb/0x1f1
[<ffffffff80012d3a>] __do_softirq+0xf5/0x1ce
[<ffffffff8001147a>] handle_IRQ_event+0x56/0xb0
[<ffffffff8006334c>] call_softirq+0x1c/0x28
[<ffffffff80070476>] do_softirq+0x2c/0x85
[<ffffffff80070441>] do_IRQ+0x149/0x152
[<ffffffff80062665>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff80008a2e>] __handle_mm_fault+0x6cd/0x1303
[<ffffffff80008903>] __handle_mm_fault+0x5a2/0x1303
[<ffffffff80033a9d>] cache_free_debugcheck+0x21f/0x22e
[<ffffffff8006a263>] do_page_fault+0x49a/0x7dc
[<ffffffff80066487>] thread_return+0x89/0x174
[<ffffffff800c5aee>] audit_syscall_exit+0x341/0x35c
[<ffffffff80062e39>] error_exit+0x0/0x84
tcp_rcv_state_process()
... // (sk_state == TCP_CLOSE_WAIT here)
...
/* step 2: check RST bit */
if(th->rst) {
tcp_reset(sk);
goto discard;
}
...
---------------------------------
tcp_rcv_state_process
tcp_reset
tcp_done
tcp_set_state(sk, TCP_CLOSE);
inet_put_port
__inet_put_port
inet_sk(sk)->num = 0;
sk->sk_shutdown = SHUTDOWN_MASK;
2) After that the process (socket owner) tries to write something to
that socket and "inet_autobind" sets a _new_ (which differs from
the original!) port number for the socket:
Call Trace:
[<ffffffff80255a12>] inet_bind_hash+0x33/0x5f
[<ffffffff80257180>] inet_csk_get_port+0x216/0x268
[<ffffffff8026bcc9>] inet_autobind+0x22/0x8f
[<ffffffff80049140>] inet_sendmsg+0x27/0x57
[<ffffffff8003a9d9>] do_sock_write+0xae/0xea
[<ffffffff80226ac7>] sock_writev+0xdc/0xf6
[<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe
[<ffffffff8001fb49>] __pollwait+0x0/0xdd
[<ffffffff8008d533>] default_wake_function+0x0/0xe
[<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e
[<ffffffff800f0b49>] do_readv_writev+0x163/0x274
[<ffffffff80066538>] thread_return+0x13a/0x174
[<ffffffff800145d8>] tcp_poll+0x0/0x1c9
[<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3
[<ffffffff800f0dd0>] sys_writev+0x49/0xe4
[<ffffffff800622dd>] tracesys+0xd5/0xe0
3) sendmsg fails at last with -EPIPE (=> 'write' returns -EPIPE in userspace):
F: tcp_sendmsg1 -EPIPE: sk=ffff81000bda00d0, sport=49847, old_state=7, new_state=7, sk_err=0, sk_shutdown=3
Call Trace:
[<ffffffff80027557>] tcp_sendmsg+0xcb/0xe87
[<ffffffff80033300>] release_sock+0x10/0xae
[<ffffffff8016f20f>] vgacon_cursor+0x0/0x1a7
[<ffffffff8026bd32>] inet_autobind+0x8b/0x8f
[<ffffffff8003a9d9>] do_sock_write+0xae/0xea
[<ffffffff80226ac7>] sock_writev+0xdc/0xf6
[<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe
[<ffffffff8001fb49>] __pollwait+0x0/0xdd
[<ffffffff8008d533>] default_wake_function+0x0/0xe
[<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e
[<ffffffff800f0b49>] do_readv_writev+0x163/0x274
[<ffffffff80066538>] thread_return+0x13a/0x174
[<ffffffff800145d8>] tcp_poll+0x0/0x1c9
[<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3
[<ffffffff800f0dd0>] sys_writev+0x49/0xe4
[<ffffffff800622dd>] tracesys+0xd5/0xe0
tcp_sendmsg()
...
/* Wait for a connection to finish. */
if ((1 << sk->sk_state) & ~(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) {
int old_state = sk->sk_state;
if ((err = sk_stream_wait_connect(sk, &timeo)) != 0) {
if (f_d && (err == -EPIPE)) {
printk("F: tcp_sendmsg1 -EPIPE: sk=%p, sport=%u, old_state=%d, new_state=%d, "
"sk_err=%d, sk_shutdown=%d\n",
sk, ntohs(inet_sk(sk)->sport), old_state, sk->sk_state,
sk->sk_err, sk->sk_shutdown);
dump_stack();
}
goto out_err;
}
}
...
4) Then the process (socket owner) understands that it's time to close
that socket and does that (and thus triggers sending reset packet):
Call Trace:
...
[<ffffffff80032077>] dev_queue_xmit+0x343/0x3d6
[<ffffffff80034698>] ip_output+0x351/0x384
[<ffffffff80251ae9>] dst_output+0x0/0xe
[<ffffffff80036ec6>] ip_queue_xmit+0x567/0x5d2
[<ffffffff80095700>] vprintk+0x21/0x33
[<ffffffff800070f0>] check_poison_obj+0x2e/0x206
[<ffffffff80013587>] poison_obj+0x36/0x45
[<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d
[<ffffffff80023481>] dbg_redzone1+0x1c/0x25
[<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d
[<ffffffff8000ca94>] cache_alloc_debugcheck_after+0x189/0x1c8
[<ffffffff80023405>] tcp_transmit_skb+0x764/0x786
[<ffffffff8025df8a>] tcp_send_active_reset+0xf9/0x14d
[<ffffffff80258ff1>] tcp_close+0x39a/0x960
[<ffffffff8026be12>] inet_release+0x69/0x80
[<ffffffff80059b31>] sock_release+0x4f/0xcf
[<ffffffff80059d4c>] sock_close+0x2c/0x30
[<ffffffff800133c9>] __fput+0xac/0x197
[<ffffffff800252bc>] filp_close+0x59/0x61
[<ffffffff8001eff6>] sys_close+0x85/0xc7
[<ffffffff800622dd>] tracesys+0xd5/0xe0
So, in brief:
* a received packet for socket in TCP_CLOSE_WAIT state triggers
tcp_reset() which clears inet_sk(sk)->num and put socket into
TCP_CLOSE state
* an attempt to write to that socket forces inet_autobind() to get a
new port (but the write itself fails with -EPIPE)
* tcp_close() called for socket in TCP_CLOSE state sends an active
reset via socket with newly allocated port
This adds an additional check in tcp_close() for already closed
sockets. We do not want to send anything to closed sockets.
Signed-off-by: Konstantin Khorenko <khorenko@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove rtnl_unlock() which had no corresponding rtnl_lock().
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
this patch is implementing IP_NODEFRAG option for IPv4 socket.
The reason is, there's no other way to send out the packet with user
customized header of the reassembly part.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use u64_stats_sync infrastructure to provide 64bit rx/tx
counters even on 32bit hosts.
It is safe to use a single u64_stats_sync for rx and tx,
because BH is disabled on both, and we use per_cpu data.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netif_needs_gso() is checked twice in the TX path once,
before submitting the skb to the qdisc and once after
it is dequeued from the qdisc just before calling
ndo_hard_start(). This opens a window for a user to
change the gso/tso or tx checksum settings that can
cause netif_needs_gso to be true in one check and false
in the other.
Specifically, changing TX checksum setting may cause
the warning in skb_gso_segment() to be triggered if
the checksum is calculated earlier.
This consolidates the netif_needs_gso() calls so that
the stack only checks if gso is needed in
dev_hard_start_xmit().
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
It has been reported that the new UFO software fallback path
fails under certain conditions with NFS. I tracked the problem
down to the generation of UFO packets that are smaller than the
MTU. The software fallback path simply discards these packets.
This patch fixes the problem by not generating such packets on
the UFO path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added new CAIF protocol type CAIFPROTO_DEBUG for accessing
CAIF debug on the ST Ericsson modems.
There are two debug servers on the modem, one for radio related
debug (CAIF_RADIO_DEBUG_SERVICE) and the other for
communication/application related debug (CAIF_COM_DEBUG_SERVICE).
The debug connection can contain trace debug printouts or
interactive debug used for debugging and test.
Debug connections can be of type STREAM or SEQPACKET.
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously CAIF supported maximum transfer size of ~4050.
The transfer size is now calculated dynamically based on the
link layers mtu size.
Signed-off-by: Sjur Braendeland@stericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>
CAIF Remote File Manager may send or receive more than 4050 bytes.
Due to this The CAIF RFM service have to support segmentation.
Signed-off-by: Sjur Braendeland@stericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Flow control is not used by all CAIF services.
The usage of flow control is now part of the gerneal
initialization function for CAIF Services.
Signed-off-by: Sjur Braendeland@stericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>
It is common in end-node, non STP bridges to set forwarding
delay to zero; which causes the forwarding database cleanup
to run every clock tick. Change to run only as soon as needed
or at next ageing timer interval which ever is sooner.
Use round_jiffies_up macro rather than attempting round up
by changing value.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the restriction that only allows connecting to a unix domain
socket identified by unix path that is in the same network namespace.
Crossing network namespaces is always tricky and we did not support
this at first, because of a strict policy of don't mix the namespaces.
Later after Pavel proposed this we did not support this because no one
had performed the audit to make certain using unix domain sockets
across namespaces is safe.
What fundamentally makes connecting to af_unix sockets in other
namespaces is safe is that you have to have the proper permissions on
the unix domain socket inode that lives in the filesystem. If you
want strict isolation you just don't create inodes where unfriendlys
can get at them, or with permissions that allow unfriendlys to open
them. All nicely handled for us by the mount namespace and other
standard file system facilities.
I looked through unix domain sockets and they are a very controlled
environment so none of the work that goes on in dev_forward_skb to
make crossing namespaces safe appears needed, we are not loosing
controll of the skb and so do not need to set up the skb to look like
it is comming in fresh from the outside world. Further the fields in
struct unix_skb_parms should not have any problems crossing network
namespaces.
Now that we handle SCM_CREDENTIALS in a way that gives useable values
across namespaces. There does not appear to be any operational
problems with encouraging the use of unix domain sockets across
containers either.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In unix_skb_parms store pointers to struct pid and struct cred instead
of raw uid, gid, and pid values, then translate the credentials on
reception into values that are meaningful in the receiving processes
namespaces.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Start capturing not only the userspace pid, uid and gid values of the
sending process but also the struct pid and struct cred of the sending
process as well.
This is in preparation for properly supporting SCM_CREDENTIALS for
sockets that have different uid and/or pid namespaces at the different
ends.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
scm_send occasionally allocates state in the scm_cookie, so I have
modified netlink_sendmsg to guarantee that when scm_send succeeds
scm_destory will be called to free that state.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use struct pid and struct cred to store the peer credentials on struct
sock. This gives enough information to convert the peer credential
information to a value relative to whatever namespace the socket is in
at the time.
This removes nasty surprises when using SO_PEERCRED on socket
connetions where the processes on either side are in different pid and
user namespaces.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To keep the coming code clear and to allow both the sock
code and the scm code to share the logic introduce a
fuction to translate from struct cred to struct ucred.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
https://bugzilla.kernel.org/show_bug.cgi?id=16183
The sch_teql module, which can be used to load balance over a set of
underlying interfaces, stopped working after 2.6.30 and has been
broken in all kernels since then for any underlying interface which
requires the addition of link level headers.
The problem is that the transmit routine relies on being able to
access the destination address in the skb in order to do address
resolution once it has decided which underlying interface it is going
to transmit through.
In 2.6.31 the IFF_XMIT_DST_RELEASE flag was introduced, and set by
default for all interfaces, which causes the destination address to be
released before the transmit routine for the interface is called.
The solution is to clear that flag for teql interfaces.
Signed-off-by: Tom Hughes <tom@compton.nu>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Discard the ACK if we find options that do not match current sysctl
settings.
Previously it was possible to create a connection with sack, wscale,
etc. enabled even if the feature was disabled via sysctl.
Also remove an unneeded call to tcp_sack_reset() in
cookie_check_timestamp: Both call sites (cookie_v4_check,
cookie_v6_check) zero "struct tcp_options_received", hand it to
tcp_parse_options() (which does not change tcp_opt->num_sacks/dsack)
and then call cookie_check_timestamp().
Even if num_sacks/dsacks were changed, the structure is allocated on
the stack and after cookie_check_timestamp returns only a few selected
members are copied to the inet_request_sock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
regression introduced by b8d92c9c14
In function ‘ieee80211_work_rx_queued_mgmt’:
warning: ‘rma’ may be used uninitialized in this function
this re-adds default value WORK_ACT_NONE back to rma
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Addition of rcu_head to struct inet_peer added 16bytes on 64bit arches.
Thats a bit unfortunate, since old size was exactly 64 bytes.
This can be solved, using an union between this rcu_head an four fields,
that are normally used only when a refcount is taken on inet_peer.
rcu_head is used only when refcnt=-1, right before structure freeing.
Add a inet_peer_refcheck() function to check this assertion for a while.
We can bring back SLAB_HWCACHE_ALIGN qualifier in kmem cache creation.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Followup of commit aa1039e73c (inetpeer: RCU conversion)
Unused inet_peer entries have a null refcnt.
Using atomic_inc_not_zero() in rcu lookups is not going to work for
them, and slow path is taken.
Fix this using -1 marker instead of 0 for deleted entries.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The version of br_netpoll_send_skb used when netpoll is off is
missing a const thus causing a warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge multicast patches introduced an OOM crash in the forward
path, when deliver_clone fails to clone the skb.
Reported-by: Mark Wagner <mwagner@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Third param (work) is unused, remove it.
Remove __inline__ and inline qualifiers.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of doing one atomic operation per frag, we can factorize them.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When syncookies are in effect, req->iif is left uninitialized.
In case of e.g. link-local addresses the route lookup then fails
and no syn-ack is sent.
Rearrange things so ->iif is also initialized in the syncookie case.
want_cookie can only be true when the isn was zero, thus move the want_cookie
check into the "!isn" branch.
Cc: Glenn Griffin <ggriffin.kernel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Andrzej Siewior