Previously, some implicit resizes that happend during handshake
have not been reported as prominently as explicit resize.
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So far there was the possibility that we called
genlmsg_new(GFP_NOIO)/mutex_lock() while holding an rcu_read_lock().
This included cases like:
drbd_sync_handshake (acquire the RCU lock)
drbd_asb_recover_1p
drbd_khelper
drbd_bcast_event
genlmsg_new(GFP_NOIO) --> may sleep
drbd_sync_handshake (acquire the RCU lock)
drbd_asb_recover_1p
drbd_khelper
notify_helper
genlmsg_new(GFP_NOIO) --> may sleep
drbd_sync_handshake (acquire the RCU lock)
drbd_asb_recover_1p
drbd_khelper
notify_helper
mutex_lock --> may sleep
While using GFP_ATOMIC whould have been possible in the first two cases,
the real fix is to narrow the rcu_read_lock.
Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 88c85538, "virtio-blk: add discard and write zeroes features
to specification" (https://github.com/oasis-tcs/virtio-spec), the virtio
block specification has been extended to add VIRTIO_BLK_T_DISCARD and
VIRTIO_BLK_T_WRITE_ZEROES commands. This patch enables support for
discard and write zeroes in the virtio-blk driver when the device
advertises the corresponding features, VIRTIO_BLK_F_DISCARD and
VIRTIO_BLK_F_WRITE_ZEROES.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
blk_mq_init_queue() will not return NULL pointer to its caller,
so it's better to replace IS_ERR_OR_NULL using IS_ERR in loop_add().
If in the future things change to check NULL pointer inside loop_add(),
we should return -ENOMEM as return code instead of PTR_ERR(NULL).
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add __exit annotation to cleanup helper which
is only called once in the module.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For cases where we can only fail with IO in-flight, we should be using
BLK_STS_DEV_RESOURCE instead of BLK_STS_RESOURCE. The latter refers to
system wide resource constraints.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "cmd_slot_unal" semaphore is never used in a blocking way
but only as an atomic counter. Change the code to using
atomic_dec_if_positive() as a better API.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prior patches ensured that any bio that interacts with a request_queue
is properly associated with a blkg. This makes bio->bi_css unnecessary
as blkg maintains a reference to blkcg already.
This removes the bio field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need this for blk-mq to kick things into gear, if we told it that
we had more IO coming, but then failed to deliver on that promise.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need this for blk-mq to kick things into gear, if we told it that
we had more IO coming, but then failed to deliver on that promise.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Smatch complains that there is an off by one if the allocation fails in:
DMABuffer = atari_stram_alloc(BUFFER_SIZE+512, "ataflop");
In that situation, "i" would be point to one element beyond the end of
the unit[] array.
There is a second bug because the error handling calls
blk_mq_free_tag_set(&unit[i].tag_set); regardless of whether
"disk->queue" is NULL or non-NULL. So if blk_mq_init_sq_queue() fails,
then that means unit[i].tag_set->tags is NULL and it leads to an Oops.
It's easiest to call put_disk() before the goto to clean up the partial
iteration. Then the earlier unit[] elements are fully allocated so we
can remove the checks whether "disk->queue" is NULL and the code is
simpler.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__vdc_tx_trigger should only loop on EAGAIN a finite
number of times.
See commit adddc32d6f ("sunvnet: Do not spin in an
infinite loop when vio_ldc_send() returns EAGAIN") for detail.
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'shash' algorithms are always synchronous, so passing CRYPTO_ALG_ASYNC
in the mask to crypto_alloc_shash() has no effect. Many users therefore
already don't pass it, but some still do. This inconsistency can cause
confusion, especially since the way the 'mask' argument works is
somewhat counterintuitive.
Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
This patch shouldn't change any actual behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlvx2sAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGycgIAIuxobwt0RRKa0zO
ROS+34JGoC2yU2P9VdEGWdtxS6ANMVQgKPBhWL6s+xR89Kd+V4xSdJLD1pNTxxqP
0DCva0np1/Q4juH+JbU50v/lykoLgteZ0P0LBRGf1y8p3WiLPv45IbnNsMDNYhB2
7a8rOmZYakRY9CPznRDw3X8cJt3sddKgFJHIOGz1OQJVWtCD0KPGcJmQNsbDSagY
Zx6Z5BKSIdjRqaAdN5gDa1Pft3WQo7TpaQGl80lSsgr5LcjmscXA3sClOCy+25Mo
FZLx0PcwP+Efq8RTGzNK51WSOMa6d37hvjDqUAdQBOR0KbyjRyXQwyQVw/MGbPJs
7J3Pzm0=
=56Mt
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc3' into for-4.21/block
Merge in -rc3 to resolve a few conflicts, but also to get a few
important fixes that have gone into mainline since the block
4.21 branch was forked off (most notably the SCSI queue issue,
which is both a conflict AND needed fix).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the locking removed, it's unused. Kill it.
Fixes: 503f620f0c ("floppy: remove queue_lock around floppy_end_request")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_queue_max_hw_sectors can't do anything with queue_lock protection
so don't hold it.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is nothing the queue_lock could protect inside floppy_end_request,
so remove it.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the legacy request path gone there is no good reason to keep
queue_lock as a pointer, we can always use the embedded lock now.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixed floppy and blk-cgroup missing conversions and half done edits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the legacy request path gone there is no real need to override the
queue_lock.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The umem card->lock and the block layer queue_lock are used for entirely
different resources. Stop using card->lock as the block layer
queue_lock.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The DRBD req_lock and block layer queue_lock are used for entirely
different resources. Stop using the req_lock as the block layer
queue_lock.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is nothing it could synchronize against, so don't go through
the pains of acquiring the lock.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 0a42e99b58 ("loop: Get rid of loop_index_mutex") forgot to
remove mutex_unlock(&loop_ctl_mutex) from loop_control_ioctl() when
replacing loop_index_mutex with loop_ctl_mutex.
Fixes: 0a42e99b58 ("loop: Get rid of loop_index_mutex")
Reported-by: syzbot <syzbot+c0138741c2290fc5e63f@syzkaller.appspotmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
LKP recently reported a hang at bootup in the floppy code:
[ 245.678853] INFO: task mount:580 blocked for more than 120 seconds.
[ 245.679906] Tainted: G T 4.19.0-rc6-00172-ga9f38e1 #1
[ 245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 245.682181] mount D 6372 580 1 0x00000004
[ 245.683023] Call Trace:
[ 245.683425] __schedule+0x2df/0x570
[ 245.683975] schedule+0x2d/0x80
[ 245.684476] schedule_timeout+0x19d/0x330
[ 245.685090] ? wait_for_common+0xa5/0x170
[ 245.685735] wait_for_common+0xac/0x170
[ 245.686339] ? do_sched_yield+0x90/0x90
[ 245.686935] wait_for_completion+0x12/0x20
[ 245.687571] __floppy_read_block_0+0xfb/0x150
[ 245.688244] ? floppy_resume+0x40/0x40
[ 245.688844] floppy_revalidate+0x20f/0x240
[ 245.689486] check_disk_change+0x43/0x60
[ 245.690087] floppy_open+0x1ea/0x360
[ 245.690653] __blkdev_get+0xb4/0x4d0
[ 245.691212] ? blkdev_get+0x1db/0x370
[ 245.691777] blkdev_get+0x1f3/0x370
[ 245.692351] ? path_put+0x15/0x20
[ 245.692871] ? lookup_bdev+0x4b/0x90
[ 245.693539] blkdev_get_by_path+0x3d/0x80
[ 245.694165] mount_bdev+0x2a/0x190
[ 245.694695] squashfs_mount+0x10/0x20
[ 245.695271] ? squashfs_alloc_inode+0x30/0x30
[ 245.695960] mount_fs+0xf/0x90
[ 245.696451] vfs_kern_mount+0x43/0x130
[ 245.697036] do_mount+0x187/0xc40
[ 245.697563] ? memdup_user+0x28/0x50
[ 245.698124] ksys_mount+0x60/0xc0
[ 245.698639] sys_mount+0x19/0x20
[ 245.699167] do_int80_syscall_32+0x61/0x130
[ 245.699813] entry_INT80_32+0xc7/0xc7
showing that we never complete that read request. The reason is that
the completion setup is racy - it initializes the completion event
AFTER submitting the IO, which means that the IO could complete
before/during the init. If it does, we are passing garbage to
complete() and we may sleep forever waiting for the event to
occur.
Fixes: 7b7b68bba5 ("floppy: bail out in open() if drive is not responding to block0 read")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Makes the code a whole lot easier to read.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a retries field to the internal request structure instead, which gets
set to zero on the first submission.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
null_softirq_done_fn is only used for the blk-mq path, so remove the
other branch. Also rename the function to better match the method name.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper instead of manually iterating the scatterlist,
which is broken in the presence of chained S/G lists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead create add to the icmd into struct mtip_cmd which can be unioned
with the scatterlist used for the normal I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merging this function into the only callers makes the code flow easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There isn't much need for this helper - we can just calculate the offset
for the command header once late in the submission path and fill out
the ctba and ctbau fields there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a new is_stopped helper that matches the existing
is_se_active helper, and merge the trivial amount of remaining code
into the only caller. This also allows better error handling by
returning a BLK_STS_* directly instead of explicitly calling
blk_mq_end_request, and moving blk_mq_start_request closer to the
actual issue to hardware.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have all arguments at hand in mtip_hw_submit_io, so keep the
rq to sg mapping close to the dma_map_sg call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current sx8 code spends a lot of effort dealing with the fact that
tags are per-host, but there might be multiple queues. Now that the
driver has been converted to blk-mq it can take care of the blk-mq
tag_set concept that has been designed just for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make the disk/queue alloc and free helpers per-port by moving the
trivial loops into the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have this functionality in sbitmap, but we don't export it in
blk-mq for users of the tags busy iteration. This can be useful
for stopping the iteration, if the caller doesn't need to find
more requests.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The nested acquisition of loop_ctl_mutex (->lo_ctl_mutex back then) has
been introduced by commit f028f3b2f9 "loop: fix circular locking in
loop_clr_fd()" to fix lockdep complains about bd_mutex being acquired
after lo_ctl_mutex during partition rereading. Now that these are
properly fixed, let's stop fooling lockdep.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Code in loop_change_fd() drops reference to the old file (and also the
new file in a failure case) under loop_ctl_mutex. Similarly to a
situation in loop_set_fd() this can create a circular locking dependency
if this was the last reference holding the file open. Delay dropping of
the file reference until we have released loop_ctl_mutex.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling blkdev_reread_part() under loop_ctl_mutex causes lockdep to
complain about circular lock dependency between bdev->bd_mutex and
lo->lo_ctl_mutex. The problem is that on loop device open or close
lo_open() and lo_release() get called with bdev->bd_mutex held and they
need to acquire loop_ctl_mutex. OTOH when loop_reread_partitions() is
called with loop_ctl_mutex held, it will call blkdev_reread_part() which
acquires bdev->bd_mutex. See syzbot report for details [1].
Move call to blkdev_reread_part() in __loop_clr_fd() from under
loop_ctl_mutex to finish fixing of the lockdep warning and the possible
deadlock.
[1] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d1588
Reported-by: syzbot <syzbot+4684a000d5abdade83fac55b1e7d1f935ef1936e@syzkaller.appspotmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling loop_reread_partitions() under loop_ctl_mutex causes lockdep to
complain about circular lock dependency between bdev->bd_mutex and
lo->lo_ctl_mutex. The problem is that on loop device open or close
lo_open() and lo_release() get called with bdev->bd_mutex held and they
need to acquire loop_ctl_mutex. OTOH when loop_reread_partitions() is
called with loop_ctl_mutex held, it will call blkdev_reread_part() which
acquires bdev->bd_mutex. See syzbot report for details [1].
Move all calls of loop_rescan_partitions() out of loop_ctl_mutex to
avoid lockdep warning and fix deadlock possibility.
[1] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d1588
Reported-by: syzbot <syzbot+4684a000d5abdade83fac55b1e7d1f935ef1936e@syzkaller.appspotmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The call of __blkdev_reread_part() from loop_reread_partition() happens
only when we need to invalidate partitions from loop_release(). Thus
move a detection for this into loop_clr_fd() and simplify
loop_reread_partition().
This makes loop_reread_partition() safe to use without loop_ctl_mutex
because we use only lo->lo_number and lo->lo_file_name in case of error
for reporting purposes (thus possibly reporting outdate information is
not a big deal) and we are safe from 'lo' going away under us by
elevated lo->lo_refcnt.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Push loop_ctl_mutex down to loop_change_fd(). We will need this to be
able to call loop_reread_partitions() without loop_ctl_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Push lo_ctl_mutex down to loop_set_fd(). We will need this to be able to
call loop_reread_partitions() without lo_ctl_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Push loop_ctl_mutex down to loop_set_status(). We will need this to be
able to call loop_reread_partitions() without loop_ctl_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Push loop_ctl_mutex down to loop_get_status() to avoid the unusual
convention that the function gets called with loop_ctl_mutex held and
releases it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
loop_clr_fd() has a weird locking convention that is expects
loop_ctl_mutex held, releases it on success and keeps it on failure.
Untangle the mess by moving locking of loop_ctl_mutex into
loop_clr_fd().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move setting of lo_state to Lo_rundown out into the callers. That will
allow us to unlock loop_ctl_mutex while the loop device is protected
from other changes by its special state.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Push acquisition of lo_ctl_mutex down into individual ioctl handling
branches. This is a preparatory step for pushing the lock down into
individual ioctl handling functions so that they can release the lock as
they need it. We also factor out some simple ioctl handlers that will
not need any special handling to reduce unnecessary code duplication.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that loop_ctl_mutex is global, just get rid of loop_index_mutex as
there is no good reason to keep these two separate and it just
complicates the locking.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__loop_release() has a single call site. Fold it there. This is
currently not a huge win but it will make following replacement of
loop_index_mutex more obvious.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot is reporting NULL pointer dereference [1] which is caused by
race condition between ioctl(loop_fd, LOOP_CLR_FD, 0) versus
ioctl(other_loop_fd, LOOP_SET_FD, loop_fd) due to traversing other
loop devices at loop_validate_file() without holding corresponding
lo->lo_ctl_mutex locks.
Since ioctl() request on loop devices is not frequent operation, we don't
need fine grained locking. Let's use global lock in order to allow safe
traversal at loop_validate_file().
Note that syzbot is also reporting circular locking dependency between
bdev->bd_mutex and lo->lo_ctl_mutex [2] which is caused by calling
blkdev_reread_part() with lock held. This patch does not address it.
[1] https://syzkaller.appspot.com/bug?id=f3cfe26e785d85f9ee259f385515291d21bd80a3
[2] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d15889
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+bf89c128e05dd6c62523@syzkaller.appspotmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vfs_getattr() needs "struct path" rather than "struct file".
Let's use path_get()/path_put() rather than get_file()/fput().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stephen reports:
After merging the block tree, today's linux-next build (sparc64 defconfig)
produced this warning:
/home/sfr/next/next/drivers/block/sunvdc.c: In function 'init_queue':
/home/sfr/next/next/drivers/block/sunvdc.c:788:6: warning: unused variable 'ret' [-Wunused-variable]
int ret;
^~~
Kill the unused variable.
Fixes: fa182a1fa9 ("sunvdc: convert to blk-mq")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for allowing multiple sets of maps per
queue, if so desired.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert from the old request_fn style driver to blk-mq.
Cc: David Miller <davem@davemloft.net>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow the creation of conventional zones by adding the zone_nr_conv
configuration attribute. This new attribute is used only for zoned devices
and indicates the number of conventional zones to create. The default value
is 0. Since host-managed zoned block devices must always have at least one
sequential zone, if the value of zone_nr_conv is larger than or equal to
the total number of zones of the device nr_zones, zone_nr_conv is
automatically changed to nr_zones - 1.
Reviewed-by: Matias Bjorling <matias.bjorling@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
info->nr_rings isn't adjusted in case of ENOMEM error from
negotiate_mq(). This leads to kernel panic in error path.
Typical call stack involving panic -
#8 page_fault at ffffffff8175936f
[exception RIP: blkif_free_ring+33]
RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292
...
#9 blkif_free at ffffffffa0149aaa [xen_blkfront]
#10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront]
#11 blkback_changed at ffffffffa014ea8b [xen_blkfront]
#12 xenbus_otherend_changed at ffffffff81424670
#13 backend_changed at ffffffff81426dc3
#14 xenwatch_thread at ffffffff81422f29
#15 kthread at ffffffff810abe6a
#16 ret_from_fork at ffffffff81754078
Cc: stable@vger.kernel.org
Fixes: 7ed8ce1c5f ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs")
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----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=0zM4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
brd_free() may be called in failure path on one brd instance which
disk isn't added yet, so release handler of gendisk may free the
associated request_queue early and causes the following use-after-free[1].
This patch fixes this issue by associating gendisk with request_queue
just before adding disk.
[1] KASAN: use-after-free Read in del_timer_syncNon-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
usbcore: registered new interface driver udl
==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20
kernel/locking/lockdep.c:3218
Read of size 8 at addr ffff8801d1b6b540 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x39d lib/dump_stack.c:113
print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
__lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218
lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844
del_timer_sync+0xb7/0x270 kernel/time/timer.c:1283
blk_cleanup_queue+0x413/0x710 block/blk-core.c:809
brd_free+0x5d/0x71 drivers/block/brd.c:422
brd_init+0x2eb/0x393 drivers/block/brd.c:518
do_one_initcall+0x145/0x957 init/main.c:890
do_initcall_level init/main.c:958 [inline]
do_initcalls init/main.c:966 [inline]
do_basic_setup init/main.c:984 [inline]
kernel_init_freeable+0x5c6/0x6b9 init/main.c:1148
kernel_init+0x11/0x1ae init/main.c:1068
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:350
Reported-by: syzbot+3701447012fe951dabb2@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- a series that fixes some old memory allocation issues in libceph
(myself). We no longer allocate memory in places where allocation
failures cannot be handled and BUG when the allocation fails.
- support for copy_file_range() syscall (Luis Henriques). If size and
alignment conditions are met, it leverages RADOS copy-from operation.
Otherwise, a local copy is performed.
- a patch that reduces memory requirement of ceph_sync_read() from the
size of the entire read to the size of one object (Zheng Yan).
- fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
Henriques)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlvZ6AcTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi8H+B/9V/QB1BX5Q2DvkS3mcLNI2NphrppaD
VBuviwoIzaBm1paCrx40J/pCtsK1Fybl5dBAh1W0SDxEGR8JUA8GJw+oemtOS6pZ
DwjOF9S7uhzf5M3nQ9SvAbIudBISMZQRi22Y8fWs3k+yaECIz1J/pe7RiKo/GBAB
NnlbrZ1AYSB02chchVCSmWTApeIRp9JXnaM9xLMJWGVLL/vONjt3ltJ/w9haGYz8
FPFLPFeWobWqFElnOUomxU8Cv84DgPtH8si0UAn16jveractpFJWO4X6LDs/ZYDk
/MccfsB3EK9BCJdLJMoI0/lXxE33z3/MehmJDs9xGSX/N4N7UTF8Ve1b
=U91e
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- a series that fixes some old memory allocation issues in libceph
(myself). We no longer allocate memory in places where allocation
failures cannot be handled and BUG when the allocation fails.
- support for copy_file_range() syscall (Luis Henriques). If size and
alignment conditions are met, it leverages RADOS copy-from
operation. Otherwise, a local copy is performed.
- a patch that reduces memory requirement of ceph_sync_read() from
the size of the entire read to the size of one object (Zheng Yan).
- fallocate() syscall is now restricted to FALLOC_FL_PUNCH_HOLE (Luis
Henriques)"
* tag 'ceph-for-4.20-rc1' of git://github.com/ceph/ceph-client: (25 commits)
ceph: new mount option to disable usage of copy-from op
ceph: support copy_file_range file operation
libceph: support the RADOS copy-from operation
ceph: add non-blocking parameter to ceph_try_get_caps()
libceph: check reply num_data_items in setup_request_data()
libceph: preallocate message data items
libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls
libceph: introduce alloc_watch_request()
libceph: assign cookies in linger_submit()
libceph: enable fallback to ceph_msg_new() in ceph_msgpool_get()
ceph: num_ops is off by one in ceph_aio_retry_work()
libceph: no need to call osd_req_opcode_valid() in osd_req_encode_op()
ceph: set timeout conditionally in __cap_delay_requeue
libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()
libceph: introduce ceph_pagelist_alloc()
libceph: osd_req_op_cls_init() doesn't need to take opcode
libceph: bump CEPH_MSG_MAX_DATA_LEN
ceph: only allow punch hole mode in fallocate
ceph: refactor ceph_sync_read()
ceph: check if LOOKUPNAME request was aborted when filling trace
...
Trivial fix to clean up an indentation issue, remove tabs
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of fairly
complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for each
process and preload them on context switch. Leading to a 27% speedup for our
context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print more debug
information when they occur, and try to continue running by flushing the SLB
and reloading, rather than treating them as fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on 64-bit
Book3S. We only support up to 512TB as regular system memory, otherwise the
percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are presented
to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE flags.
- Add a driver for the PAPR SCM (storage class memory) interface, allowing
guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we need to use
a trampoline to get to ftrace_caller().
Many other smaller enhancements and cleanups.
Thanks to:
Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda
Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel
Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari
Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael
Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran,
Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam
Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell,
Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant
Hegde, YueHaibing, zhong jiang,
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJb01vTAAoJEFHr6jzI4aWADsEP/jqL3+2qxs098ra80tpXCpXJ
tgXCosEs4b35sGtyHeUWZZZfWXeisaPAIlP8zTx1n50HACZduDYRAl0Ew9XB7Xdw
enDHRVccD21FsmHBOx/Ii1rVJlovWlj6EQCWHKeZmNjeRoFuClVZ7CYmf+mBifKR
sw2Db2fKA/59wMTq2zIMy5pqYgqlAs4jTWS6uN5hKPoBmO/82ARnNG+qgLuloD3Z
O8zSDM9QQ7PpuyDgTjO9SAo2YjmEfXlEG6cOCCejsU3DMctaEAK5PUZ+blsHYHBH
BYZYKs/x4pcw0SO41GtTh0M2YqDYBVuBIpRw8lLZap97Xo9ucSkAm5WD3rGxk4CY
YeZKEPUql6MHN3+DKl8mx2F0V+Et/tio2HNqc9KReR1tfoolZAbe+SFZHfgmc/Rq
RD9nnG8KRd4K2K1BTqpkTmI1EtE7jPtPJPSV8gMGhgL/N5vPmH3mql/qyOtYx48E
6/hPzWESgs16VRZ/opLh8VvjlY1HBDODQhehhhl+o23/Vb8qEgRf8Uqhq50rQW1H
EeOqyyYQ90txSU31Sgy1kQkvOgIFAsBObWT1ZCJ3RbfGbB4/tdEAvZqTZRlXo2OY
7P0Sqcw/9Le5eJkHIlLtBv0TF7y1OYemCbLgRQzFlcRP+UKtYyg8eFnFjqbPEEmP
ulwhn/BfFVSgaYKQ503u
=I0pj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of
fairly complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for
each process and preload them on context switch. Leading to a 27%
speedup for our context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print
more debug information when they occur, and try to continue running
by flushing the SLB and reloading, rather than treating them as
fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on
64-bit Book3S. We only support up to 512TB as regular system
memory, otherwise the percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task
canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are
presented to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE
flags.
- Add a driver for the PAPR SCM (storage class memory) interface,
allowing guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we
need to use a trampoline to get to ftrace_caller().
And many other smaller enhancements and cleanups.
Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"
* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
Revert "selftests/powerpc: Fix out-of-tree build errors"
powerpc/msi: Fix compile error on mpc83xx
powerpc: Fix stack protector crashes on CPU hotplug
powerpc/traps: restore recoverability of machine_check interrupts
powerpc/64/module: REL32 relocation range check
powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
selftests/powerpc: Add a test of wild bctr
powerpc/mm: Fix page table dump to work on Radix
powerpc/mm/radix: Display if mappings are exec or not
powerpc/mm/radix: Simplify split mapping logic
powerpc/mm/radix: Remove the retry in the split mapping logic
powerpc/mm/radix: Fix small page at boundary when splitting
powerpc/mm/radix: Fix overuse of small pages in splitting logic
powerpc/mm/radix: Fix off-by-one in split mapping logic
powerpc/ftrace: Handle large kernel configs
powerpc/mm: Fix WARN_ON with THP NUMA migration
selftests/powerpc: Fix out-of-tree build errors
powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
powerpc/time: isolate scaled cputime accounting in dedicated functions.
...
-----BEGIN PGP SIGNATURE-----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=NFEB
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181026' of git://git.kernel.dk/linux-block
Pull more block layer updates from Jens Axboe:
- Set of patches improving support for zoned devices. This was ready
before the merge window, but I was late in picking it up and hence it
missed the original pull request (Damien, Christoph)
- libata no link power management quirk addition for a Samsung drive
(Diego Viola)
- Fix for a performance regression in BFQ that went into this merge
window (Federico Motta)
- Fix for a missing dma mask setting return value check (Gustavo)
- Typo in the gdrom queue failure case (me)
- NULL pointer deref fix for xen-blkfront (Vasilis Liaskovitis)
- Fixing the get_rq trace point placement in blk-mq (Xiaoguang Wang)
- Removal of a set-but-not-read variable in cdrom (zhong jiang)
* tag 'for-linus-20181026' of git://git.kernel.dk/linux-block:
libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9
block, bfq: fix asymmetric scenarios detection
gdrom: fix mistake in assignment of error
blk-mq: place trace_block_getrq() in correct place
block: Introduce blk_revalidate_disk_zones()
block: add a report_zones method
block: Expose queue nr_zones in sysfs
block: Improve zone reset execution
block: Introduce BLKGETNRZONES ioctl
block: Introduce BLKGETZONESZ ioctl
block: Limit allocation of zone descriptors for report zones
block: Introduce blkdev_nr_zones() helper
scsi: sd_zbc: Fix sd_zbc_check_zones() error checks
scsi: sd_zbc: Reduce boot device scan and revalidate time
scsi: sd_zbc: Rearrange code
cdrom: remove set but not used variable 'tocuse'
skd: fix unchecked return values
xen/blkfront: avoid NULL blkfront_info dereference on device removal
Drivers exposing zoned block devices have to initialize and maintain
correctness (i.e. revalidate) of the device zone bitmaps attached to
the device request queue (seq_zones_bitmap and seq_zones_wlock).
To simplify coding this, introduce a generic helper function
blk_revalidate_disk_zones() suitable for most (and likely all) cases.
This new function always update the seq_zones_bitmap and seq_zones_wlock
bitmaps as well as the queue nr_zones field when called for a disk
using a request based queue. For a disk using a BIO based queue, only
the number of zones is updated since these queues do not have
schedulers and so do not need the zone bitmaps.
With this change, the zone bitmap initialization code in sd_zbc.c can be
replaced with a call to this function in sd_zbc_read_zones(), which is
called from the disk revalidate block operation method.
A call to blk_revalidate_disk_zones() is also added to the null_blk
driver for devices created with the zoned mode enabled.
Finally, to ensure that zoned devices created with dm-linear or
dm-flakey expose the correct number of zones through sysfs, a call to
blk_revalidate_disk_zones() is added to dm_table_set_restrictions().
The zone bitmaps allocated and initialized with
blk_revalidate_disk_zones() are freed automatically from
__blk_release_queue() using the block internal function
blk_queue_free_zone_bitmaps().
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dispatching a report zones command through the request queue is a major
pain due to the command reply payload rewriting necessary. Given that
blkdev_report_zones() is executing everything synchronously, implement
report zones as a block device file operation instead, allowing major
simplification of the code in many places.
sd, null-blk, dm-linear and dm-flakey being the only block device
drivers supporting exposing zoned block devices, these drivers are
modified to provide the device side implementation of the
report_zones() block device file operation.
For device mappers, a new report_zones() target type operation is
defined so that the upper block layer calls blkdev_report_zones() can
be propagated down to the underlying devices of the dm targets.
Implementation for this new operation is added to the dm-linear and
dm-flakey targets.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Changed method block_device argument to gendisk
* Various bug fixes and improvements
* Added support for null_blk, dm-linear and dm-flakey.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check return values of dma_set_mask_and_coherent().
Otherwise, if dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
fails, the following piece of code will be executed even when the call
to dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); returns 0:
dev_err(&pdev->dev, "DMA mask error %d\n", rc);
goto err_out_regions;
Addresses-Coverity-ID: 1474553 ("Unchecked return value")
Fixes: 1381262148 ("skd: switch to the generic DMA API")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a block device is hot-added when we are out of grants,
gnttab_grant_foreign_access fails with -ENOSPC (log message "28
granting access to ring page") in this code path:
talk_to_blkback ->
setup_blkring ->
xenbus_grant_ring ->
gnttab_grant_foreign_access
and the failing path in talk_to_blkback sets the driver_data to NULL:
destroy_blkring:
blkif_free(info, 0);
mutex_lock(&blkfront_mutex);
free_info(info);
mutex_unlock(&blkfront_mutex);
dev_set_drvdata(&dev->dev, NULL);
This results in a NULL pointer BUG when blkfront_remove and blkif_free
try to access the failing device's NULL struct blkfront_info.
Cc: stable@vger.kernel.org # 4.5 and later
Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LRTT
-----END PGP SIGNATURE-----
Merge tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"This is the main pull request for block changes for 4.20. This
contains:
- Series enabling runtime PM for blk-mq (Bart).
- Two pull requests from Christoph for NVMe, with items such as;
- Better AEN tracking
- Multipath improvements
- RDMA fixes
- Rework of FC for target removal
- Fixes for issues identified by static checkers
- Fabric cleanups, as prep for TCP transport
- Various cleanups and bug fixes
- Block merging cleanups (Christoph)
- Conversion of drivers to generic DMA mapping API (Christoph)
- Series fixing ref count issues with blkcg (Dennis)
- Series improving BFQ heuristics (Paolo, et al)
- Series improving heuristics for the Kyber IO scheduler (Omar)
- Removal of dangerous bio_rewind_iter() API (Ming)
- Apply single queue IPI redirection logic to blk-mq (Ming)
- Set of fixes and improvements for bcache (Coly et al)
- Series closing a hotplug race with sysfs group attributes (Hannes)
- Set of patches for lightnvm:
- pblk trace support (Hans)
- SPDX license header update (Javier)
- Tons of refactoring patches to cleanly abstract the 1.2 and 2.0
specs behind a common core interface. (Javier, Matias)
- Enable pblk to use a common interface to retrieve chunk metadata
(Matias)
- Bug fixes (Various)
- Set of fixes and updates to the blk IO latency target (Josef)
- blk-mq queue number updates fixes (Jianchao)
- Convert a bunch of drivers from the old legacy IO interface to
blk-mq. This will conclude with the removal of the legacy IO
interface itself in 4.21, with the rest of the drivers (me, Omar)
- Removal of the DAC960 driver. The SCSI tree will introduce two
replacement drivers for this (Hannes)"
* tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block: (204 commits)
block: setup bounce bio_sets properly
blkcg: reassociate bios when make_request() is called recursively
blkcg: fix edge case for blk_get_rl() under memory pressure
nvme-fabrics: move controller options matching to fabrics
nvme-rdma: always have a valid trsvcid
mtip32xx: fully switch to the generic DMA API
rsxx: switch to the generic DMA API
umem: switch to the generic DMA API
sx8: switch to the generic DMA API
sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE code
skd: switch to the generic DMA API
ubd: remove use of blk_rq_map_sg
nvme-pci: remove duplicate check
drivers/block: Remove DAC960 driver
nvme-pci: fix hot removal during error handling
nvmet-fcloop: suppress a compiler warning
nvme-core: make implicit seed truncation explicit
nvmet-fc: fix kernel-doc headers
nvme-fc: rework the request initialization code
nvme-fc: introduce struct nvme_fcp_op_w_sgl
...
The current requirement is that ceph_osdc_alloc_messages() should be
called after oid and oloc are known. In preparation for preallocating
message data items, move ceph_osdc_alloc_messages() further down, so
that it is called when OSD op codes are known.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add __init/__exit annotation to init/cleanup helpers
which are only called once in the module.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The mtip32xx used an odd mix of the old PCI and the generic DMA API,
so switch it over to the generic API entirely.
Note that this also removes a weird fallback to just a 32-bit coherent
dma mask if the 64-bit dma mask doesn't work, as that can't even happen.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The PCI DMA API is deprecated, switch to the generic DMA API instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The PCI DMA API is deprecated, switch to the generic DMA API instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The PCI DMA API is deprecated, switch to the generic DMA API instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This code has effectively been commented out since the first commit,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The PCI DMA API is deprecated, switch to the generic DMA API instead.
Also make use of the dma_set_mask_and_coherent helper to easily set
the streaming an coherent DMA masks together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The DAC960 driver has been obsoleted by the myrb/myrs drivers,
so it can be dropped.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This driver likes to fetch requests from all over the place, so make
queue_rq put requests on a list so that the logic stays the same. Tested
with QEMU.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Converted to blk_mq_init_sq_queue() and fixed a few spots where the
tag_set leaked on cleanup.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This driver is already pretty broken, in that it has two wait_events()
(one in stdma_lock()) in request_fn. Get rid of the first one by
freezing/quiescing the queue on format, and the second one by replacing
it with stdma_try_lock(). The rest is straightforward. Compile-tested
only and probably incorrect.
Cc: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Converted to blk_mq_init_sq_queue()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move queue allocation next to disk allocation to fix a couple of issues:
- If add_disk() hasn't been called, we should clear disk->queue before
calling put_disk().
- If we fail to allocate a request queue, we still need to put all of
the disks, not just the ones that we allocated queues for.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
atafd.h and atafdreg.h are only used from ataflop.c, so merge them in
there.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Straightforward conversion, just use the existing amiflop_lock to
serialize access to the controller. Compile-tested only.
Cc: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Converted to blk_mq_init_sq_queue()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The error handling in fd_probe_drives() doesn't clean up at all. Fix it
up in preparation for converting to blk-mq. While we're here, get rid of
the commented out amiga_floppy_remove().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
amifd.h and amifdreg.h are only used from amiflop.c, and they're pretty
small, so move the contents to amiflop.c and get rid of the .h files.
This is preparation for adding a struct blk_mq_tag_set to struct
amiga_floppy_struct.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pretty simple conversion. grab_drive() could probably be replaced by
some freeze/quiesce incantation, but I left it alone, and just used
freeze/quiesce for eject. Compile-tested only.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Converted to blk_mq_init_sq_queue().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver doesn't have support for removing a device that has already
been configured, but with more careful ordering we can avoid the need
for that and make sure that we don't leak generic resources.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only interesting thing here is that there may be two floppies (i.e.,
request queues) sharing the same controller, so we use the global struct
swim_priv->lock to check whether the controller is busy. Compile-tested
only.
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Converted to blk_mq_init_sq_queue()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Straight forward conversion, using an internal list to enable the
driver to pull requests at will.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert from the old request_fn style driver to blk-mq.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/block/null_blk_main.c: In function 'end_cmd':
drivers/block/null_blk_main.c:609:24: warning:
variable 'q' set but not used [-Wunused-but-set-variable]
It not used any more after commit
e50b1e327a ("null_blk: remove legacy IO path")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Straight forward conversion - instead of rewriting the internal buffer
retrieval logic, just replace the previous elevator peeking with an
internal list of requests.
Reviewed-by: "Ed L. Cashin" <ed.cashin@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The few callers can just use dma_set_max_seg_size ()directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the quest to remove all stack VLA usage from the kernel[1], this moves
the math for cookies calculation into macros and allocates a fixed size
array for the maximum number of cookies and adds a runtime sanity check.
(Note that the size was always fixed, but just hidden from the compiler.)
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some time ago REQ_DISCARD was renamed into REQ_OP_DISCARD. Some comments
and documentation files were not updated however. Update these comments
and documentation files. See also commit 4e1b2d52a8 ("block, fs,
drivers: remove REQ_OP compat defs and related code").
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rc6' into for-4.20/block
Merge -rc6 in, for two reasons:
1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
they aren't in the 4.20 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v4.19-rc6': (780 commits)
Linux 4.19-rc6
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
cpufreq: qcom-kryo: Fix section annotations
perf/core: Add sanity check to deal with pinned event failure
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
selftests/powerpc: Fix Makefiles for headers_install change
blk-mq: I/O and timer unplugs are inverted in blktrace
dax: Fix deadlock in dax_lock_mapping_entry()
x86/boot: Fix kexec booting failure in the SEV bit detection code
bcache: add separate workqueue for journal_write to avoid deadlock
drm/amd/display: Fix Edid emulation for linux
drm/amd/display: Fix Vega10 lightup on S3 resume
drm/amdgpu: Fix vce work queue was not cancelled when suspend
Revert "drm/panel: Add device_link from panel device to DRM device"
xen/blkfront: When purging persistent grants, keep them in the buffer
clocksource/drivers/timer-atmel-pit: Properly handle error cases
block: fix deadline elevator drain for zoned block devices
ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=8c0k
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180929' of git://git.kernel.dk/linux-block
Jens writes:
"Block fixes for 4.19-rc6
A set of fixes that should go into this release. This pull request
contains:
- A fix (hopefully) for the persistent grants for xen-blkfront. A
previous fix from this series wasn't complete, hence reverted, and
this one should hopefully be it. (Boris Ostrovsky)
- Fix for an elevator drain warning with SMR devices, which is
triggered when you switch schedulers (Damien)
- bcache deadlock fix (Guoju Fang)
- Fix for the block unplug tracepoint, which has had the
timer/explicit flag reverted since 4.11 (Ilya)
- Fix a regression in this series where the blk-mq timeout hook is
invoked with the RCU read lock held, hence preventing it from
blocking (Keith)
- NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)"
* tag 'for-linus-20180929' of git://git.kernel.dk/linux-block:
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
blk-mq: I/O and timer unplugs are inverted in blktrace
bcache: add separate workqueue for journal_write to avoid deadlock
xen/blkfront: When purging persistent grants, keep them in the buffer
block: fix deadline elevator drain for zoned block devices
blk-mq: Allow blocking queue tag iter callbacks
nvme: properly propagate errors in nvme_mpath_init
Commit a46b53672b ("xen/blkfront: cleanup
stale persistent grants") introduced a regression as purged persistent
grants were not pu into the list of free grants again. Correct that.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use new-style DEVICE_ATTR_RO/DEVICE_ATTR_RW to create the sysfs attributes
and register the disk with default sysfs attribute groups.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Register default sysfs groups during device_add_disk() to avoid a
race condition with udev during startup.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Register default sysfs groups during device_add_disk() to avoid a
race condition with udev during startup.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ed L. Cachin <ed.cashin@acm.org>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit a46b53672b ("xen/blkfront: cleanup stale persistent grants")
added support for purging persistent grants when they are not in use. As
part of the purge, the grants were removed from the grant buffer, This
eventually causes the buffer to become empty, with BUG_ON triggered in
get_free_grant(). This can be observed even on an idle system, within
20-30 minutes.
We should keep the grants in the buffer when purging, and only free the
grant ref.
Fixes: a46b53672b ("xen/blkfront: cleanup stale persistent grants")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prior patches ensured that all bios are now associated with some blkg.
This now makes bio->bi_css unnecessary as blkg maintains a reference to
the blkcg already.
This patch removes the field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=z9pB
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-block
Jens writes:
"Storage fixes for 4.19-rc5
- Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft)
- NVMe pull request from Christoph, and a single ANA log page fix
(Hannes)
- Regression fix for libata qd32 support, where we trigger an illegal
active command transition. This fixes a CD-ROM detection issue that
was reported, but could also trigger premature completion of the
internal tag (me)"
* tag 'for-linus-20180920' of git://git.kernel.dk/linux-block:
floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl
libata: mask swap internal and hardware tag
nvme: count all ANA groups for ANA Log page
The final field of a floppy_struct is the field "name", which is a pointer
to a string in kernel memory. The kernel pointer should not be copied to
user memory. The FDGETPRM ioctl copies a floppy_struct to user memory,
including this "name" field. This pointer cannot be used by the user
and it will leak a kernel address to user-space, which will reveal the
location of kernel code and data and undermine KASLR protection.
Model this code after the compat ioctl which copies the returned data
to a previously cleared temporary structure on the stack (excluding the
name pointer) and copy out to userspace from there. As we already have
an inparam union with an appropriate member and that memory is already
cleared even for read only calls make use of that as a temporary store.
Based on an initial patch by Brian Belleville.
CVE-2018-7755
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Broke up long line.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=1Jo5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180913' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series. This contains:
- Increase number of policies supported by blk-cgroup.
With blk-iolatency, we now have four in kernel, but we had a hard
limit of three...
- Fix regression in null_blk, where the zoned supported broke
queue_mode=0 (bio based).
- NVMe pull request, with a single fix for an issue in the rdma code"
* tag 'for-linus-20180913' of git://git.kernel.dk/linux-block:
null_blk: fix zoned support for non-rq based operation
blk-cgroup: increase number of supported policies
nvmet-rdma: fix possible bogus dereference under heavy load
The supported added for zones in null_blk seem to assume that only rq
based operation is possible. But this depends on the queue_mode setting,
if this is set to 0, then cmd->bio is what we need to be operating on.
Right now any attempt to load null_blk with queue_mode=0 will
insta-crash, since cmd->rq is NULL and null_handle_cmd() assumes it to
always be set.
Make the zoned code deal with bio's instead, or pass in the
appropriate sector/nr_sectors instead.
Fixes: ca4b2a0119 ("null_blk: add zone support")
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clang warns when more than one set of parentheses is used for a
single conditional statement:
drivers/block/rsxx/cregs.c:279:15: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
if ((cmd->op == CREG_OP_READ)) {
~~~~~~~~^~~~~~~~~~~~~~~
drivers/block/rsxx/cregs.c:279:15: note: remove extraneous parentheses
around the comparison to silence this warning
if ((cmd->op == CREG_OP_READ)) {
~ ^ ~
drivers/block/rsxx/cregs.c:279:15: note: use '=' to turn this equality
comparison into an assignment
if ((cmd->op == CREG_OP_READ)) {
^~
=
1 warning generated.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
went into -rc1 and a use-after-free fix.
The rbd changes have been sitting in a branch for quite a while but
couldn't be included into the -rc1 pull request because of a pending
wire protocol backwards compatibility fixup that only got committed
early this week.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAluSrJYTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi/N8B/4sZzRCJMCejvU/yRq91NlaPDrxbVHh
nfICZ/8Fsy/fmvK8NWNyHcCIWx+nWrbCvCJMj0fxWMhk/1t75yC+TdyCJnyuhsQU
V/CPTs9BTdwrSUiTB83/n/ukGL6mpESk0CQ1er/l1EO6FnNOXvgzHDnCqUQZLdzU
1aRcx5JQWWo/QlCmzt2KWENhfQRMvLAtf04F5cUuR+JTrMjwWia6MAuRGuOhVQkW
XIlFNakBKab89Vod1pmA7BrG/+sHXCpVGX6sjAp9vQUWO3WWKBRnNtVwo9dPSHah
hBR8IzOkihw7HfTlINWVpiR69nTfM80PQHXJkFSp36E6Sfq8EShRpFIZ
=pga5
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two rbd patches to complete support for images within namespaces that
went into -rc1 and a use-after-free fix.
The rbd changes have been sitting in a branch for quite a while but
couldn't be included into the -rc1 pull request because of a pending
wire protocol backwards compatibility fixup that only got committed
early this week"
* tag 'ceph-for-4.19-rc3' of https://github.com/ceph/ceph-client:
rbd: support cloning across namespaces
rbd: factor out get_parent_info()
ceph: avoid a use-after-free in ceph_destroy_options()
As you are already in a tasklet, it is unnecessary to call spin_lock_bh.
Signed-off-by: jun qian <hangdianqj@163.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparing to remove all stack VLA usage from the kernel[1], this
removes the discouraged use of AHASH_REQUEST_ON_STACK in favor of
the smaller SHASH_DESC_ON_STACK by converting from ahash-wrapped-shash
to direct shash. By removing a layer of indirection this both improves
performance and reduces stack usage. The stack allocation will be made
a fixed size in a later patch to the crypto subsystem.
The bulk of the lines in this change are simple s/ahash/shash/, but the
main logic differences are in drbd_csum_ee() and drbd_csum_bio(), which
externalizes the page walking with k(un)map_atomic() instead of using
scattergather.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=qhv7
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180906' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Small collection of fixes that should go into this release. This
contains:
- Small series that fixes a race between blkcg teardown and writeback
(Dennis Zhou)
- Fix disallowing invalid block size settings from the nbd ioctl (me)
- BFQ fix for a use-after-free on last release of a bfqg (Konstantin
Khlebnikov)
- Fix for the "don't warn for flush" fix (Mikulas)"
* tag 'for-linus-20180906' of git://git.kernel.dk/linux-block:
block: bfq: swap puts in bfqg_and_blkg_put
block: don't warn when doing fsync on read-only devices
nbd: don't allow invalid blocksize settings
blkcg: use tryget logic when associating a blkg with a bio
blkcg: delay blkg destruction until after writeback has finished
Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()"
If parent_get class method is not supported by the OSDs, fall back to
the legacy class method and assume that the parent is in the default
(i.e. "") namespace. The "use the child's image namespace" workaround
is no longer needed because creating images within namespaces will
require parent_get aware OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
In preparation for the new parent_get and parent_overlap_get class
methods, factor out the fetching and decoding of parent data.
As a side effect, we now decode all four fields in the "no parent"
case.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl.
We need proper validation of the input here. Not just if it's
zero, but also if the value is a power-of-2 and in a valid
range. Add that.
Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=bnq/
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180830' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Small collection of fixes that should go into this series. This pull
contains:
- NVMe pull request with three small fixes (via Christoph)
- Kill useless NULL check before kmem_cache_destroy (Chengguang Xu)
- Xen block driver pull request with persistent grant flushing fixes
(Juergen Gross)
- Final wbt fixes, wrapping up the changes for this series. These
have been heavily tested (me)
- cdrom info leak fix (Scott Bauer)
- ATA dma quirk for SQ201 (Linus Walleij)
- Straight forward bsg refcount_t conversion (John Pittman)"
* tag 'for-linus-20180830' of git://git.kernel.dk/linux-block:
cdrom: Fix info leak/OOB read in cdrom_ioctl_drive_status
nvmet: free workqueue object if module init fails
nvme-fcloop: Fix dropped LS's to removed target port
nvme-pci: add a memory barrier to nvme_dbbuf_update_and_check_event
block: bsg: move atomic_t ref_count variable to refcount API
block: remove unnecessary condition check
ata: ftide010: Add a quirk for SQ201
blk-wbt: remove dead code
blk-wbt: improve waking of tasks
blk-wbt: abstract out end IO completion handler
xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring
xen/blkback: move persistent grants flags to bool
xen/blkfront: reorder tests in xlblk_init()
xen/blkfront: cleanup stale persistent grants
xen/blkback: don't keep persistent grants too long
Pull Xen block driver fixes from Konrad:
"Fix for flushing out persistent pages at a deterministic rate"
* 'stable/for-jens-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/blkback: remove unused pers_gnts_lock from struct xen_blkif_ring
xen/blkback: move persistent grants flags to bool
xen/blkfront: reorder tests in xlblk_init()
xen/blkfront: cleanup stale persistent grants
xen/blkback: don't keep persistent grants too long
pers_gnts_lock isn't being used anywhere. Remove it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The struct persistent_gnt flags member is meant to be a bitfield of
different flags. There is only PERSISTENT_GNT_ACTIVE flag left, so
convert it to a bool named "active".
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In case we don't want pv block devices we should not test parameters
for sanity and eventually print out error messages. So test precluding
conditions before checking parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add a periodic cleanup function to remove old persistent grants which
are no longer in use on the backend side. This avoids starvation in
case there are lots of persistent grants for a device which no longer
is involved in I/O business.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Persistent grants are allocated until a threshold per ring is being
reached. Those grants won't be freed until the ring is being destroyed
meaning there will be resources kept busy which might no longer be
used.
Instead of freeing only persistent grants until the threshold is
reached add a timestamp and remove all persistent grants not having
been in use for a minute.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Pull IDA updates from Matthew Wilcox:
"A better IDA API:
id = ida_alloc(ida, GFP_xxx);
ida_free(ida, id);
rather than the cumbersome ida_simple_get(), ida_simple_remove().
The new IDA API is similar to ida_simple_get() but better named. The
internal restructuring of the IDA code removes the bitmap
preallocation nonsense.
I hope the net -200 lines of code is convincing"
* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
ida: Change ida_get_new_above to return the id
ida: Remove old API
test_ida: check_ida_destroy and check_ida_alloc
test_ida: Convert check_ida_conv to new API
test_ida: Move ida_check_max
test_ida: Move ida_check_leaf
idr-test: Convert ida_check_nomem to new API
ida: Start new test_ida module
target/iscsi: Allocate session IDs from an IDA
iscsi target: fix session creation failure handling
drm/vmwgfx: Convert to new IDA API
dmaengine: Convert to new IDA API
ppc: Convert vas ID allocation to new IDA API
media: Convert entity ID allocation to new IDA API
ppc: Convert mmu context allocation to new IDA API
Convert net_namespace to new IDA API
cb710: Convert to new IDA API
rsxx: Convert to new IDA API
osd: Convert to new IDA API
sd: Convert to new IDA API
...
-----BEGIN PGP SIGNATURE-----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=FS7e
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
- Set of bcache fixes and changes (Coly)
- The flush warn fix (me)
- Small series of BFQ fixes (Paolo)
- wbt hang fix (Ming)
- blktrace fix (Steven)
- blk-mq hardware queue count update fix (Jianchao)
- Various little fixes
* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
block/DAC960.c: make some arrays static const, shrinks object size
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
blk-mq: init hctx sched after update ctx and hctx mapping
block: remove duplicate initialization
tracing/blktrace: Fix to allow setting same value
pktcdvd: fix setting of 'ret' error return for a few cases
block: change return type to bool
block, bfq: return nbytes and not zero from struct cftype .write() method
block, bfq: improve code of bfq_bfqq_charge_time
block, bfq: reduce write overcharge
block, bfq: always update the budget of an entity when needed
block, bfq: readd missing reset of parent-entity service
blk-wbt: fix IO hang in wbt_wait()
block: don't warn for flush on read-only device
bcache: add the missing comments for smp_mb()/smp_wmb()
bcache: remove unnecessary space before ioctl function pointer arguments
bcache: add missing SPDX header
bcache: move open brace at end of function definitions to next line
bcache: add static const prefix to char * array declarations
bcache: fix code comments style
...
The call to strlcpy in backing_dev_store is incorrect. It should take
the size of the destination buffer instead of the size of the source
buffer. Additionally, ignore the newline character (\n) when reading
the new file_name buffer. This makes it possible to set the backing_dev
as follows:
echo /dev/sdX > /sys/block/zram0/backing_dev
The reason it worked before was the fact that strlcpy() copies 'len - 1'
bytes, which is strlen(buf) - 1 in our case, so it accidentally didn't
copy the trailing new line symbol. Which also means that "echo -n
/dev/sdX" most likely was broken.
Signed-off-by: Peter Kalauskas <peskal@google.com>
Link: http://lkml.kernel.org/r/20180813061623.GC64836@rodete-desktop-imager.corp.google.com
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eliminate the custom spinlock and the call to ida_pre_get.
Also add a call to ida_free() in the card remove routine, which I believe
fixes a bug in this driver.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Removes a use of ida_pre_get() and a personalised spinlock.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Don't populate the arrays ReadCacheStatus, WriteCacheStatus and
SenseErrors on the stack but instead make them static const. Makes
the object code smaller by 47 bytes:
Before:
text data bss dec hex filename
160974 34628 832 196434 2ff52 drivers/block/DAC960.o
After:
text data bss dec hex filename
160671 34884 832 196387 2ff23 drivers/block/DAC960.o
(gcc version 8.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
basic support for rbd images within namespaces (myself). Also included
y2038 conversion patches from Arnd, a pile of miscellaneous fixes from
Chengguang and Zheng's feature bit infrastructure for the filesystem.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlt62CkTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzizfhB/0c/rz6frunc6EcZMWuBNzlOIOktJ/m
MEbPGjCxMAsmidO1rqHHYF4iEN5hr+3AWTbtIL2m6wkqYVdg3FjmNaAYB27AdQMG
kH9bLfrKIew72/NZqXfm25yjY/86kIt8t91kay4Lchc97tSYhnFSnku7iAX2HTND
TMhq/1O/GvEyw/RmqnenJEQqFJvKnfgPPQm6W8sM2bH0T5j+EXmDT/Rv+90LogFR
J4+pZkHqDfvyMb1WJ5MkumohytbRVzRNKcMpOvjquJSqUgtgZa2JdrIsypDqSNKY
nUT6jGGlxoSbHCqRwDJoFEJOlh5A9RwKqYxNuM2a/vs9u7HpvdCK/Iah
=AtgY
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).
Also included are y2038 conversion patches from Arnd, a pile of
miscellaneous fixes from Chengguang and Zheng's feature bit
infrastructure for the filesystem"
* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
ceph: don't drop message if it contains more data than expected
ceph: support cephfs' own feature bits
crush: fix using plain integer as NULL warning
libceph: remove unnecessary non NULL check for request_key
ceph: refactor error handling code in ceph_reserve_caps()
ceph: refactor ceph_unreserve_caps()
ceph: change to void return type for __do_request()
ceph: compare fsc->max_file_size and inode->i_size for max file size limit
ceph: add additional size check in ceph_setattr()
ceph: add additional offset check in ceph_write_iter()
ceph: add additional range check in ceph_fallocate()
ceph: add new field max_file_size in ceph_fs_client
libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
libceph: check authorizer reply/challenge length before reading
libceph: implement CEPHX_V2 calculation mode
libceph: add authorizer challenge
libceph: factor out encrypt_authorizer()
libceph: factor out __ceph_x_decrypt()
libceph: factor out __prepare_write_connect()
libceph: store ceph_auth_handshake pointer in ceph_connection
...
We initialize it to -ENOMEM, but then later overwrite it. After
overwriting, we don't set it again for two later failure cases.
Reported-by: Jason Wood <jasonwood2031@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking updates from David Miller:
"Highlights:
- Gustavo A. R. Silva keeps working on the implicit switch fallthru
changes.
- Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
Luca Coelho.
- Re-enable ASPM in r8169, from Kai-Heng Feng.
- Add virtual XFRM interfaces, which avoids all of the limitations of
existing IPSEC tunnels. From Steffen Klassert.
- Convert GRO over to use a hash table, so that when we have many
flows active we don't traverse a long list during accumluation.
- Many new self tests for routing, TC, tunnels, etc. Too many
contributors to mention them all, but I'm really happy to keep
seeing this stuff.
- Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.
- Lots of cleanups and fixes in L2TP code from Guillaume Nault.
- Add IPSEC offload support to netdevsim, from Shannon Nelson.
- Add support for slotting with non-uniform distribution to netem
packet scheduler, from Yousuk Seung.
- Add UDP GSO support to mlx5e, from Boris Pismenny.
- Support offloading of Team LAG in NFP, from John Hurley.
- Allow to configure TX queue selection based upon RX queue, from
Amritha Nambiar.
- Support ethtool ring size configuration in aquantia, from Anton
Mikaev.
- Support DSCP and flowlabel per-transport in SCTP, from Xin Long.
- Support list based batching and stack traversal of SKBs, this is
very exciting work. From Edward Cree.
- Busyloop optimizations in vhost_net, from Toshiaki Makita.
- Introduce the ETF qdisc, which allows time based transmissions. IGB
can offload this in hardware. From Vinicius Costa Gomes.
- Add parameter support to devlink, from Moshe Shemesh.
- Several multiplication and division optimizations for BPF JIT in
nfp driver, from Jiong Wang.
- Lots of prepatory work to make more of the packet scheduler layer
lockless, when possible, from Vlad Buslov.
- Add ACK filter and NAT awareness to sch_cake packet scheduler, from
Toke Høiland-Jørgensen.
- Support regions and region snapshots in devlink, from Alex Vesker.
- Allow to attach XDP programs to both HW and SW at the same time on
a given device, with initial support in nfp. From Jakub Kicinski.
- Add TLS RX offload and support in mlx5, from Ilya Lesokhin.
- Use PHYLIB in r8169 driver, from Heiner Kallweit.
- All sorts of changes to support Spectrum 2 in mlxsw driver, from
Ido Schimmel.
- PTP support in mv88e6xxx DSA driver, from Andrew Lunn.
- Make TCP_USER_TIMEOUT socket option more accurate, from Jon
Maxwell.
- Support for templates in packet scheduler classifier, from Jiri
Pirko.
- IPV6 support in RDS, from Ka-Cheong Poon.
- Native tproxy support in nf_tables, from Máté Eckl.
- Maintain IP fragment queue in an rbtree, but optimize properly for
in-order frags. From Peter Oskolkov.
- Improvde handling of ACKs on hole repairs, from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
hv/netvsc: Fix NULL dereference at single queue mode fallback
net: filter: mark expected switch fall-through
xen-netfront: fix warn message as irq device name has '/'
cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
net: dsa: mv88e6xxx: missing unlock on error path
rds: fix building with IPV6=m
inet/connection_sock: prefer _THIS_IP_ to current_text_addr
net: dsa: mv88e6xxx: bitwise vs logical bug
net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
ieee802154: hwsim: using right kind of iteration
net: hns3: Add vlan filter setting by ethtool command -K
net: hns3: Set tx ring' tc info when netdev is up
net: hns3: Remove tx ring BD len register in hns3_enet
net: hns3: Fix desc num set to default when setting channel
net: hns3: Fix for phy link issue when using marvell phy driver
net: hns3: Fix for information of phydev lost problem when down/up
net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
net: hns3: Add support for serdes loopback selftest
bnxt_en: take coredump_record structure off stack
...
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
If zram supports writeback feature, it's no longer a
BD_CAP_SYNCHRONOUS_IO device beause zram does asynchronous IO operations
for incompressible pages.
Do not pretend to be synchronous IO device. It makes the system very
sluggish due to waiting for IO completion from upper layers.
Furthermore, it causes a user-after-free problem because swap thinks the
opearion is done when the IO functions returns so it can free the page
(e.g., lock_page_or_retry and goto out_release in do_swap_page) but in
fact, IO is asynchronous so the driver could access a just freed page
afterward.
This patch fixes the problem.
BUG: Bad page state in process qemu-system-x86 pfn:3dfab21
page:ffffdfb137eac840 count:0 mapcount:0 mapping:0000000000000000 index:0x1
flags: 0x17fffc000000008(uptodate)
raw: 017fffc000000008 dead000000000100 dead000000000200 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
bad because of flags: 0x8(uptodate)
CPU: 4 PID: 1039 Comm: qemu-system-x86 Tainted: G B 4.18.0-rc5+ #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0b 05/02/2017
Call Trace:
dump_stack+0x5c/0x7b
bad_page+0xba/0x120
get_page_from_freelist+0x1016/0x1250
__alloc_pages_nodemask+0xfa/0x250
alloc_pages_vma+0x7c/0x1c0
do_swap_page+0x347/0x920
__handle_mm_fault+0x7b4/0x1110
handle_mm_fault+0xfc/0x1f0
__get_user_pages+0x12f/0x690
get_user_pages_unlocked+0x148/0x1f0
__gfn_to_pfn_memslot+0xff/0x3c0 [kvm]
try_async_pf+0x87/0x230 [kvm]
tdp_page_fault+0x132/0x290 [kvm]
kvm_mmu_page_fault+0x74/0x570 [kvm]
kvm_arch_vcpu_ioctl_run+0x9b3/0x1990 [kvm]
kvm_vcpu_ioctl+0x388/0x5d0 [kvm]
do_vfs_ioctl+0xa2/0x630
ksys_ioctl+0x70/0x80
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Link: https://lore.kernel.org/lkml/0516ae2d-b0fd-92c5-aa92-112ba7bd32fc@contabo.de/
Link: http://lkml.kernel.org/r/20180802051112.86174-1-minchan@kernel.org
[minchan@kernel.org: fix changelog, add comment]
Link: https://lore.kernel.org/lkml/0516ae2d-b0fd-92c5-aa92-112ba7bd32fc@contabo.de/
Link: http://lkml.kernel.org/r/20180802051112.86174-1-minchan@kernel.org
Link: http://lkml.kernel.org/r/20180805233722.217347-1-minchan@kernel.org
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Tino Lehnig <tino.lehnig@contabo.de>
Tested-by: Tino Lehnig <tino.lehnig@contabo.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org> [4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sparse complains:
drivers/block/null_blk_main.c:816:24: sparse: context imbalance in 'null_insert_page' - unexpected unlock
Fix it by adding the necessary annotations to the function.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1056543 ("Missing break in switch")
Addresses-Coverity-ID: 1056544 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kmem_cache_destroy has taken null pointer into account. So it is
safe to drop the null check before calling the function.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
mempool_destroy has taken the null pointer into account. So it is safe
to remove the null check.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
debugfs_remove_recursive has taken null pointer into account. So it is
safe to drop the null check before calling the function.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return statements in functions returning bool should use true or false
instead of an integer value.
This code was detected with the help of Coccinelle.
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This removes more casts of struct request_sense and uses the standard
struct scsi_sense_hdr instead. This also fixes any possible stale values
since the prior code did not check the sense length.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a lot of needless struct request_sense usage in the CDROM
code. These can all be struct scsi_sense_hdr instead, to avoid any
confusion over their respective structure sizes. This patch is a lot
of noise changing "sense" to "sshdr", but the final code is more
readable to distinguish between "sense" meaning "struct request_sense"
and "sshdr" meaning "struct scsi_sense_hdr".
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.
[ Remove now redundant ts variable in writepage_nounlock(). ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Cloning across namespaces isn't supported yet -- for now both the
parent and the clone have to live in the same namespace, whether the
default (i.e. "") or a user-created namespace.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114722 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
User controls @dev_minor which to be used as index of pkt_devs.
So, It can be exploited via Spectre-like attack. (speculative execution)
This kind of attack leaks address of pkt_devs, [1]
It leads an attacker to bypass security mechanism such as KASLR.
So sanitize @dev_minor before using it to prevent attack.
[1] https://github.com/jinb-park/linux-exploit/
tree/master/exploit-remaining-spectre-gadget/leak_pkt_devs.c
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=2ogY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180727' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Bigger than usual at this time, mostly due to the O_DIRECT corruption
issue and the fact that I was on vacation last week. This contains:
- NVMe pull request with two fixes for the FC code, and two target
fixes (Christoph)
- a DIF bio reset iteration fix (Greg Edwards)
- two nbd reply and requeue fixes (Josef)
- SCSI timeout fixup (Keith)
- a small series that fixes an issue with bio_iov_iter_get_pages(),
which ended up causing corruption for larger sized O_DIRECT writes
that ended up racing with buffered writes (Martin Wilck)"
* tag 'for-linus-20180727' of git://git.kernel.dk/linux-block:
block: reset bi_iter.bi_done after splitting bio
block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
blkdev: __blkdev_direct_IO_simple: fix leak in error case
block: bio_iov_iter_get_pages: fix size of last iovec
nvmet: only check for filebacking on -ENOTBLK
nvmet: fixup crash on NULL device path
scsi: set timed out out mq requests to complete
blk-mq: export setting request completion state
nvme: if_ready checks to fail io to deleting controller
nvmet-fc: fix target sgl list on large transfers
nbd: handle unexpected replies better
nbd: don't requeue the same request twice.
Remove some macros not used anywhere.
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit ca4b2a0119 ("null_blk: add zone support") breaks several
blktests scripts because it renamed the null_blk kernel module into
null_blk_mod. Hence rename null_blk_mod back into null_blk.
Fixes: ca4b2a0119 ("null_blk: add zone support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Matias Bjorling <matias.bjorling@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The netlink policy should be const like other drivers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add and use a new op_stat_group() function for indexing partition stat
fields rather than indexing them by rq_data_dir() or bio_data_dir().
This function works similarly to op_is_sync() in that it takes the
request::cmd_flags or bio::bi_opf flags and determines which stats
should et updated.
In addition, the second parameter to generic_start_io_acct() and
generic_end_io_acct() is now a REQ_OP rather than simply a read or
write bit and it uses op_stat_group() on the parameter to determine
the stat group.
Note that the partition in_flight counts are not part of the per-cpu
statistics and as such are not indexed via this function. It's now
indexed by op_is_write().
tj: Refreshed on top of v4.17. Updated to pass around REQ_OP.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a part_stat_read_accum macro to genhd.h to read and sum across
field entries. For example to sum up the number read and write
sectors completed. In addition to being ar reasonable cleanup by
itself this will make it easier to add new stat fields in the future.
tj: Refreshed on top of v4.17.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
c11f0c0b5b ("block/mm: make bdev_ops->rw_page() take a bool for
read/write") replaced @op with boolean @is_write, which limited the
amount of information going into ->rw_page() and more importantly
page_endio(), which removed the need to expose block internals to mm.
Unfortunately, we want to track discards separately and @is_write
isn't enough information. This patch updates bdev_ops->rw_page() to
take REQ_OP instead but leaves page_endio() to take bool @is_write.
This allows the block part of operations to have enough information
while not leaking it to mm.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Remove checkpatch errors caused due to assignment operation in if
condition
Signed-off-by: RAGHU Halharvi <raghuhack78@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the server or network is misbehaving and we get an unexpected reply
we can sometimes miss the request not being started and wait on a
request and never get a response, or even double complete the same
request. Fix this by replacing the send_complete completion with just a
per command lock. Add a per command cookie as well so that we can know
if we're getting a double completion for a previous event. Also check
to make sure we dont have REQUEUED set as that means we raced with the
timeout handler and need to just let the retry occur.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can race with the snd timeout and the per-request timeout and end up
requeuing the same request twice. We can't use the send_complete
completion to tell if everything is ok because we hold the tx_lock
during send, so the timeout stuff will block waiting to mark the socket
dead, and we could be marked complete and still requeue. Instead add a
flag to the socket so we know whether we've been requeued yet.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the existing %pad printk format to print dma_addr_t values.
This avoids the following warnings when compiling on the parisc64 platform:
drivers/block/skd_main.c: In function 'skd_preop_sg_list':
drivers/block/skd_main.c:660:4: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 6 has type 'dma_addr_t {aka unsigned int}' [-Wformat=]
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix build warnings in DAC960.c when CONFIG_PROC_FS is not enabled
by marking the unused functions as __maybe_unused.
../drivers/block/DAC960.c:6429:12: warning: 'dac960_proc_show' defined but not used [-Wunused-function]
../drivers/block/DAC960.c:6449:12: warning: 'dac960_initial_status_proc_show' defined but not used [-Wunused-function]
../drivers/block/DAC960.c:6456:12: warning: 'dac960_current_status_proc_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Adds support for exposing a null_blk device through the zone device
interface.
The interface is managed with the parameters zoned and zone_size.
If zoned is set, the null_blk instance registers as a zoned block
device. The zone_size parameter defines how big each zone will be.
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the null_blk device driver, such that it can prepare for
zoned block interface support.
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently mbps knob could only be set once before switching power knob to
on, after power knob has been set at least once, there is no way to set
mbps knob again due to -EBUSY.
As nullb is mainly used for testing, in order to make it flexible, this
removes the flag NULLB_DEV_FL_CONFIGURED so that mbps knob can be reset
when power knob is off, e.g.
echo 0 > /config/nullb/a/power
echo 40 > /config/nullb/a/mbps
echo 1 > /config/nullb/a/power
So does other knobs under /config/nullb/a.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Warning level 2 was used in this case: -Wimplicit-fallthrough=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Variable n is being assigned but is never used hence it is redundant
and can be removed. Also put spacing between variables in declaration
to clean up checkpatch warnings.
Cleans up clang warning:
warning: variable 'n' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pointer inode is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable 'inode' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Variable dflags is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable 'dflags' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since __must_hold() is defined in <linux/compiler_types.h>, do not
redefine it in DRBD. Compile-tested only.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls
in lo_compat_ioctl. It only takes an unsigned long argument, and
in practice a 32-bit value works fine.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have
struct drbd_requests { ... struct bio *private_bio; ... }
to hold a bio clone for local submission.
On local IO completion, we put that bio, and in case we want to use the
result later, we overload that member to hold the ERR_PTR() of the
completion result,
Which, before v4.3, used to be the passed in "int error",
so we could first bio_put(), then assign.
v4.3-rc1~100^2~21 4246a0b63b block: add a bi_error field to struct bio
changed that:
bio_put(req->private_bio);
- req->private_bio = ERR_PTR(error);
+ req->private_bio = ERR_PTR(bio->bi_error);
Which introduces an access after free,
because it was non obvious that req->private_bio == bio.
Impact of that was mostly unnoticable, because we only use that value
in a multiple-failure case, and even then map any "unexpected" error
code to EIO, so worst case we could potentially mask a more specific
error with EIO in a multiple failure case.
Unless the pointed to memory region was unmapped, as is the case with
CONFIG_DEBUG_PAGEALLOC, in which case this results in
BUG: unable to handle kernel paging request
v4.13-rc1~70^2~75 4e4cbee93d block: switch bios to blk_status_t
changes it further to
bio_put(req->private_bio);
req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status));
And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected
values, which catches this "sometimes", if the memory has been reused
quickly enough for other things.
Should also go into stable since 4.3, with the trivial change around 4.13.
Cc: stable@vger.kernel.org
Fixes: 4246a0b63b block: add a bi_error field to struct bio
Reported-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=0uqV
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180629' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Small set of fixes for this series. Mostly just minor fixes, the only
oddball in here is the sg change.
The sg change came out of the stall fix for NVMe, where we added a
mempool and limited us to a single page allocation. CONFIG_SG_DEBUG
sort-of ruins that, since we'd need to account for that. That's
actually a generic problem, since lots of drivers need to allocate SG
lists. So this just removes support for CONFIG_SG_DEBUG, which I added
back in 2007 and to my knowledge it was never useful.
Anyway, outside of that, this pull contains:
- clone of request with special payload fix (Bart)
- drbd discard handling fix (Bart)
- SATA blk-mq stall fix (me)
- chunk size fix (Keith)
- double free nvme rdma fix (Sagi)"
* tag 'for-linus-20180629' of git://git.kernel.dk/linux-block:
sg: remove ->sg_magic member
drbd: Fix drbd_request_prepare() discard handling
blk-mq: don't queue more if we get a busy return
block: Fix cloning of requests with a special payload
nvme-rdma: fix possible double free of controller async event buffer
block: Fix transfer when chunk sectors exceeds max
Fix the test that verifies whether bio_op(bio) represents a discard
or write zeroes operation. Compile-tested only.
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Fixes: 7435e9018f ("drbd: zero-out partial unaligned discards on local backend")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=hCgr
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180623' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Further timeout fixes. We aren't quite there yet, so expect another
round of fixes for that to completely close some of the IRQ vs
completion races. (Christoph/Bart)
- Set of NVMe fixes from the usual suspects, mostly error handling
- Two off-by-one fixes (Dan)
- Another bdi race fix (Jan)
- Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron)
* tag 'for-linus-20180623' of git://git.kernel.dk/linux-block:
blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE
bdi: Fix another oops in wb_workfn()
lightnvm: Remove depends on HAS_DMA in case of platform dependency
nvme-pci: limit max IO size and segments to avoid high order allocations
nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
nvme-fc: release io queues to allow fast fail
nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.
block: sed-opal: Fix a couple off by one bugs
blk-mq-debugfs: Off by one in blk_mq_rq_state_name()
nvmet: reset keep alive timer in controller enable
nvme-rdma: don't override opts->queue_size
nvme-rdma: Fix command completion race at error recovery
nvme-rdma: fix possible free of a non-allocated async event buffer
nvme-rdma: fix possible double free condition when failing to create a controller
Revert "block: Add warning for bi_next not NULL in bio_endio()"
block: fix timeout changes for legacy request drivers
While __atomic_add_unless() was originally intended as a building-block
for atomic_add_unless(), it's now used in a number of places around the
kernel. It's the only common atomic operation named __atomic*(), rather
than atomic_*(), and for consistency it would be better named
atomic_fetch_add_unless().
This lack of consistency is slightly confusing, and gets in the way of
scripting atomics. Given that, let's clean things up and promote it to
an official part of the atomics API, in the form of
atomic_fetch_add_unless().
This patch converts definitions and invocations over to the new name,
including the instrumented version, using the following script:
----
git grep -w __atomic_add_unless | while read line; do
sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}";
done
git grep -w __arch_atomic_add_unless | while read line; do
sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}";
done
----
Note that we do not have atomic{64,_long}_fetch_add_unless(), which will
be introduced by later patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will
issue a disconnect from nbd_release if the device has no remaining
bdev->bd_openers.
Fix ret val so reconfigure with only setting the flag succeeds.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_complete_request can only be called for blk-mq drivers, but when
removing the BLK_EH_HANDLED return value, two legacy request timeout
methods incorrectly got switched to call blk_mq_complete_request.
Call __blk_complete_request instead to reinstance the previous behavior.
For that __blk_complete_request needs to be exported.
Fixes: 1fc2b62e ("scsi_transport_fc: complete requests from ->timeout")
Fixes: 0df0bb08 ("null_blk: complete requests from ->timeout")
Reported-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
requests are aborted, improving CephFS ENOSPC handling and making
"umount -f" actually work (Zheng and myself). The rest is mostly
mount option handling cleanups from Chengguang and assorted fixes
from Zheng, Luis and Dongsheng.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbIkigAAoJEEp/3jgCEfOL3EUH/1s7Ib3FgFzG/SPPKISxZOGr
ndZGg0rPT9mPIQ4rp6t0z/cDlMrluPmCK3sWrAPe//sZz9iZiuip+mCL0gUFXFNr
1kL2xDKkJzGxtP3UlUvr5CC6bnxLdeBXJRBDLk/swtphuqArKndlbN/iLZnCZivT
uJDk+vZTwNJ3UhQP4QdnOQLV60NYs+q4euTqbZF3+pDiRiONbxRfXC3adFsc8zL9
zlie3CHPbrQHWMsfNvbfM3rBH1WhTwEssDm+IEFlKl19q9SKP2WPZfmBcE1pmZ58
AhIMoNGdQha1FXS6N96kaPaqFgeysPnEPoyHDqLxsUMKqsvJlOEZsK1jujza4rE=
=EfXm
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main piece is a set of libceph changes that revamps how OSD
requests are aborted, improving CephFS ENOSPC handling and making
"umount -f" actually work (Zheng and myself).
The rest is mostly mount option handling cleanups from Chengguang and
assorted fixes from Zheng, Luis and Dongsheng.
* tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits)
rbd: flush rbd_dev->watch_dwork after watch is unregistered
ceph: update description of some mount options
ceph: show ino32 if the value is different with default
ceph: strengthen rsize/wsize/readdir_max_bytes validation
ceph: fix alignment of rasize
ceph: fix use-after-free in ceph_statfs()
ceph: prevent i_version from going back
ceph: fix wrong check for the case of updating link count
libceph: allocate the locator string with GFP_NOFAIL
libceph: make abort_on_full a per-osdc setting
libceph: don't abort reads in ceph_osdc_abort_on_full()
libceph: avoid a use-after-free during map check
libceph: don't warn if req->r_abort_on_full is set
libceph: use for_each_request() in ceph_osdc_abort_on_full()
libceph: defer __complete_request() to a workqueue
libceph: move more code into __complete_request()
libceph: no need to call flush_workqueue() before destruction
ceph: flush pending works before shutdown super
ceph: abort osd requests on force umount
libceph: introduce ceph_osdc_abort_requests()
...
-----BEGIN PGP SIGNATURE-----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=N3BP
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180608' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes for this merge window, where some of them should go in
sooner rather than later, hence a new pull this week. This pull
request contains:
- Set of NVMe fixes, mostly follow up cleanups/fixes to the queue
changes, but also teardown/removal and misc changes (Christop/Dan/
Johannes/Sagi/Steve).
- Two lightnvm fixes for issues that showed up in this window
(Colin/Wei).
- Failfast/driver flags inheritance for flush requests (Hannes).
- The md device put sanitization and fix (Kent).
- dm bio_set inheritance fix (me).
- nbd discard granularity fix (Josef).
- nbd consistency in command printing (Kevin).
- Loop recursion validation fix (Ted).
- Partition overlap check (Wang)"
[ .. and now my build is warning-free again thanks to the md fix - Linus ]
* tag 'for-linus-20180608' of git://git.kernel.dk/linux-block: (22 commits)
nvme: cleanup double shift issue
nvme-pci: make CMB SQ mod-param read-only
nvme-pci: unquiesce dead controller queues
nvme-pci: remove HMB teardown on reset
nvme-pci: queue creation fixes
nvme-pci: remove unnecessary completion doorbell check
nvme-pci: remove unnecessary nested locking
nvmet: filter newlines from user input
nvme-rdma: correctly check for target keyed sgl support
nvme: don't hold nvmf_transports_rwsem for more than transport lookups
nvmet: return all zeroed buffer when we can't find an active namespace
md: Unify mddev destruction paths
dm: use bioset_init_from_src() to copy bio_set
block: add bioset_init_from_src() helper
block: always set partition number to '0' in blk_partition_remap()
block: pass failfast and driver-specific flags to flush requests
nbd: set discard_alignment to the granularity
nbd: Consistently use request pointer in debug messages.
block: add verifier for cmdline partition
lightnvm: pblk: fix resource leak of invalid_bitmap
...
Pull aio iopriority support from Al Viro:
"The rest of aio stuff for this cycle - Adam's aio ioprio series"
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: aio ioprio use ioprio_check_cap ret val
fs: aio ioprio add explicit block layer dependence
fs: iomap dio set bio prio from kiocb prio
fs: blkdev set bio prio from kiocb prio
fs: Add aio iopriority support
fs: Convert kiocb rw_hint from enum to u16
block: add ioprio_check_cap function
zRam as swap is useful for small memory device. However, swap means
those pages on zram are mostly cold pages due to VM's LRU algorithm.
Especially, once init data for application are touched for launching,
they tend to be not accessed any more and finally swapped out. zRAM can
store such cold pages as compressed form but it's pointless to keep in
memory. Better idea is app developers free them directly rather than
remaining them on heap.
This patch tell us last access time of each block of zram via "cat
/sys/kernel/debug/zram/zram0/block_state".
The output is as follows,
300 75.033841 .wh
301 63.806904 s..
302 63.806919 ..h
First column is zram's block index and 3rh one represents symbol (s:
same page w: written page to backing store h: huge page) of the block
state. Second column represents usec time unit of the block was last
accessed. So above example means the 300th block is accessed at
75.033851 second and it was huge so it was written to the backing store.
Admin can leverage this information to catch cold|incompressible pages
of process with *pagemap* once part of heaps are swapped out.
I used the feature a few years ago to find memory hoggers in userspace
to notify them what memory they have wasted without touch for a long
time. With it, they could reduce unnecessary memory space. However, at
that time, I hacked up zram for the feature but now I need the feature
again so I decided it would be better to upstream rather than keeping it
alone. I hope I submit the userspace tool to use the feature soon.
[akpm@linux-foundation.org: fix i386 printk warning]
[minchan@kernel.org: use ktime_get_boottime() instead of sched_clock()]
Link: http://lkml.kernel.org/r/20180420063525.GA253739@rodete-desktop-imager.corp.google.com
[akpm@linux-foundation.org: documentation tweak]
[akpm@linux-foundation.org: fix i386 printk warning]
[minchan@kernel.org: fix compile warning]
Link: http://lkml.kernel.org/r/20180508104849.GA8209@rodete-desktop-imager.corp.google.com
[rdunlap@infradead.org: fix printk formats]
Link: http://lkml.kernel.org/r/3652ccb1-96ef-0b0b-05d1-f661d7733dcc@infradead.org
Link: http://lkml.kernel.org/r/20180416090946.63057-5-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zRam as swap is useful for small memory device. However, swap means
those pages on zram are mostly cold pages due to VM's LRU algorithm.
Especially, once init data for application are touched for launching,
they tend to be not accessed any more and finally swapped out. zRAM can
store such cold pages as compressed form but it's pointless to keep in
memory. Better idea is app developers free them directly rather than
remaining them on heap.
This patch records last access time of each block of zram so that With
upcoming zram memory tracking, it could help userspace developers to
reduce memory footprint.
Link: http://lkml.kernel.org/r/20180416090946.63057-4-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark incompressible pages so that we could investigate who is the owner
of the incompressible pages once the page is swapped out via using
upcoming zram memory tracker feature.
With it, we could prevent such pages to be swapped out by using mlock.
Otherwise we might remove them.
This patch exposes new stat for huge pages via mm_stat.
Link: http://lkml.kernel.org/r/20180416090946.63057-3-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "zram memory tracking", v5.
zRam as swap is useful for small memory device. However, swap means
those pages on zram are mostly cold pages due to VM's LRU algorithm.
Especially, once init data for application are touched for launching,
they tend to be not accessed any more and finally swapped out. zRAM can
store such cold pages as compressed form but it's pointless to keep in
memory. As well, it's pointless to store incompressible pages to zram
so better idea is app developers manages them directly like free or
mlock rather than remaining them on heap.
This patch provides a debugfs /sys/kernel/debug/zram/zram0/block_state
to represent each block's state so admin can investigate what memory is
cold|incompressible|same page with using pagemap once the pages are
swapped out.
The output is as follows:
300 75.033841 .wh
301 63.806904 s..
302 63.806919 ..h
First column is zram's block index and 3rh one represents symbol (s:
same page w: written page to backing store h: huge page) of the block
state. Second column represents usec time unit of the block was last
accessed. So above example means the 300th block is accessed at
75.033851 second and it was huge so it was written to the backing store.
This patch (of 4):
ZRAM_ACCESS is used for locking a slot of zram so correct the name. It
is also not a common flag to indicate status of the block so move the
declare position on top of the flag. Lastly, let's move the function to
the top of source code to be able to use it easily without forward
declaration.
Link: http://lkml.kernel.org/r/20180416090946.63057-2-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Technically we should be able to get away with 0 as the
discard_alignment, but there's no way currently for the protocol to
indicate different alignments, and in real life most disks have
discard_alignment == discard_granularity. Just set our alignment to our
blocksize to make sure discards will actually work properly with 4k
drives.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Existing dev_dbg messages sometimes identify request using request
pointer, sometimes using nbd_cmd pointer. This makes it hard to
follow request flow. Consistently use request pointer instead.
Reviewed-by: Josef Bacik <jbacik@toxicpanda.com>
Signed-off-by: Kevin Vigor <kvigor@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a problem if we are going to unmap a rbd device and the
watch_dwork is going to queue delayed work for watch:
unmap Thread watch Thread timer
do_rbd_remove
cancel_tasks_sync(rbd_dev)
queue_delayed_work for watch
destroy_workqueue(rbd_dev->task_wq)
drain_workqueue(wq)
destroy other resources in wq
call_timer_fn
__queue_work()
Then the delayed work escape the cancel_tasks_sync() and
destroy_workqueue() and we will get an user-after-free call trace:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Modules linked in:
CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 4.17.0-rc6+ #13
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__queue_work+0x6a/0x3b0
RSP: 0018:ffff9427df1c3e90 EFLAGS: 00010086
RAX: ffff9427deca8400 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff9427deca8400 RSI: ffff9427df1c3e50 RDI: 0000000000000000
RBP: ffff942783e39e00 R08: ffff9427deca8400 R09: ffff9427df1c3f00
R10: 0000000000000004 R11: 0000000000000005 R12: ffff9427cfb85970
R13: 0000000000002000 R14: 000000000001eca0 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff9427df1c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000004c900a005 CR4: 00000000000206e0
Call Trace:
<IRQ>
? __queue_work+0x3b0/0x3b0
call_timer_fn+0x2d/0x130
run_timer_softirq+0x16e/0x430
? tick_sched_timer+0x37/0x70
__do_softirq+0xd2/0x280
irq_exit+0xd5/0xe0
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
[ Move rbd_dev->watch_dwork cancellation so that rbd_reregister_watch()
either bails out early because the watch is UNREGISTERED at that point
or just gets cancelled. ]
Cc: stable@vger.kernel.org
Fixes: 99d1694310 ("rbd: retry watch re-registration periodically")
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nga/
-----END PGP SIGNATURE-----
Merge tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- clean up how we pass around gfp_t and
blk_mq_req_flags_t (Christoph)
- prepare us to defer scheduler attach (Christoph)
- clean up drivers handling of bounce buffers (Christoph)
- fix timeout handling corner cases (Christoph/Bart/Keith)
- bcache fixes (Coly)
- prep work for bcachefs and some block layer optimizations (Kent).
- convert users of bio_sets to using embedded structs (Kent).
- fixes for the BFQ io scheduler (Paolo/Davide/Filippo)
- lightnvm fixes and improvements (Matias, with contributions from Hans
and Javier)
- adding discard throttling to blk-wbt (me)
- sbitmap blk-mq-tag handling (me/Omar/Ming).
- remove the sparc jsflash block driver, acked by DaveM.
- Kyber scheduler improvement from Jianchao, making it more friendly
wrt merging.
- conversion of symbolic proc permissions to octal, from Joe Perches.
Previously the block parts were a mix of both.
- nbd fixes (Josef and Kevin Vigor)
- unify how we handle the various kinds of timestamps that the block
core and utility code uses (Omar)
- three NVMe pull requests from Keith and Christoph, bringing AEN to
feature completeness, file backed namespaces, cq/sq lock split, and
various fixes
- various little fixes and improvements all over the map
* tag 'for-4.18/block-20180603' of git://git.kernel.dk/linux-block: (196 commits)
blk-mq: update nr_requests when switching to 'none' scheduler
block: don't use blocking queue entered for recursive bio submits
dm-crypt: fix warning in shutdown path
lightnvm: pblk: take bitmap alloc. out of critical section
lightnvm: pblk: kick writer on new flush points
lightnvm: pblk: only try to recover lines with written smeta
lightnvm: pblk: remove unnecessary bio_get/put
lightnvm: pblk: add possibility to set write buffer size manually
lightnvm: fix partial read error path
lightnvm: proper error handling for pblk_bio_add_pages
lightnvm: pblk: fix smeta write error path
lightnvm: pblk: garbage collect lines with failed writes
lightnvm: pblk: rework write error recovery path
lightnvm: pblk: remove dead function
lightnvm: pass flag on graceful teardown to targets
lightnvm: pblk: check for chunk size before allocating it
lightnvm: pblk: remove unnecessary argument
lightnvm: pblk: remove unnecessary indirection
lightnvm: pblk: return NVM_ error on failed submission
lightnvm: pblk: warn in case of corrupted write buffer
...
This is the per-I/O equivalent of the ioprio_set system call.
When IOCB_FLAG_IOPRIO is set on the iocb aio_flags field, then we set the
newly added kiocb ki_ioprio field to the value in the iocb aio_reqprio field.
This patch depends on block: add ioprio_check_cap function.
Signed-off-by: Adam Manzanares <adam.manzanares@wdc.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We already check for started commands in all callbacks, but we should
also protect against already completed commands. Do this by taking
the checks to common code.
Acked-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a userspace client requests a NBD device be disconnected, the
DISCONNECT_REQUESTED flag is set. While this flag is set, the driver
will not inform userspace when a connection is closed.
Unfortunately the flag was never cleared, so once a disconnect was
requested the driver would thereafter never tell userspace about a
closed connection. Thus when connections failed due to timeout, no
attempt to reconnect was made and eventually the device would fail.
Fix by clearing the DISCONNECT_REQUESTED flag (and setting the
DISCONNECTED flag) once all connections are closed.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Kevin Vigor <kvigor@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that
is not what is happening - instead the driver already completed the
command. Fix the symbolic name to reflect that a little better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.
see: https://lkml.org/lkml/2016/8/2/1945
Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>
Miscellanea:
o Wrapped modified multi-line calls to a single line where appropriate
o Realign modified multi-line calls to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QBaF
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180524' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes that should go into this release:
- a loop writeback error clearing fix from Jeff
- the sr sense fix from myself"
* tag 'for-linus-20180524' of git://git.kernel.dk/linux-block:
loop: clear wb_err in bd_inode when detaching backing file
sr: pass down correctly sized SCSI sense buffer
For some reason we had discard granularity set to 512 always even when
discards were disabled. Fix this by having the default be 0, and then
if we turn it on set the discard granularity to the blocksize.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add WQ_UNBOUND to the knbd-recv workqueue so we're not bound
to a single CPU that is selected at device creation time.
Signed-off-by: Dan Melnic <dmm@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a loop block device encounters a writeback error, that error will
get propagated to the bd_inode's wb_err field. If we then detach the
backing file from it, attach another and fsync it, we'll get back the
writeback error that we had from the previous backing file.
This is a bit of a grey area as POSIX doesn't cover loop devices, but it
is somewhat counterintuitive.
If we detach a backing file from the loopdev while there are still
unreported errors, take it as a sign that we're no longer interested in
the previous file, and clear out the wb_err in the loop blockdev.
Reported-and-Tested-by: Theodore Y. Ts'o <tytso@mit.edu>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to make sure we don't just set the size of the bdev to 0 while
it's being used by a file system. We have the appropriate check in
nbd_bdev_reset, simply use that helper instead.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bd_invalidated is kind of a pain wrt partitions as it really only
triggers the partition rescan if it is set after bd_ops->open() runs, so
setting it when we reset the device isn't useful. We also sporadically
would still have partitions left over in some disconnect cases, so fix
this by always setting bd_invalidated on open if there's no
configuration or if we've had a disconnect action happen, that way the
partition table gets invalidated and rescanned properly.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is what the ioctl based nbd disconnect does as well. Without this
the device will just sit there and wait for the connection to go away
(or IO to occur) before the device gets torn down. Instead clear
everything up on our end so the configuration goes away as quickly as
possible.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we stopped relying on the bdev everywhere I broke updating the
block device size on the fly, which ceph relies on. We can't just do
set_capacity, we also have to do bd_set_size so things like parted will
notice the device size change.
Fixes: 29eaadc ("nbd: stop using the bdev everywhere")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I messed up changing the size of an NBD device while it was connected by
not actually updating the device or doing the uevent. Fix this by
updating everything if we're connected and we change the size.
cc: stable@vger.kernel.org
Fixes: 639812a ("nbd: don't set the device size until we're connected")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This fixes a use after free bug, we shouldn't be doing disk->queue right
after we do del_gendisk(disk). Save the queue and do the cleanup after
the del_gendisk.
Fixes: c6a4759ea0 ("nbd: add device refcounting")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Found a bug (with ASAN) where we were passing a bio to bio_copy_data()
with bi_next not NULL, when it should have been - a driver had left
bi_next set to something after calling bio_endio().
Since the normal case is only copying single bios, split out
bio_list_copy_data() to avoid more bugs like this in the future.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Same numerical value (for now at least), but a much better documentation
of intent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lars Ellenberg