kmalloc() result check was lacking. Fixing that required also
changing card_send_command() return type from void to int, and
checking its return code everywhere.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78561
Reported-by: Maksymilian Arciemowicz <max@cert.cx>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl issue in
ft1000/ft1000-pcmcia/ft1000_dnld.c
ERROR: code indent should use tabs where possible
Signed-off-by: Quentin Lee <lee.rhapsody@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.
2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
Benniston.
3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
Mork.
4) BPF now has a "random" opcode, from Chema Gonzalez.
5) Add more BPF documentation and improve test framework, from Daniel
Borkmann.
6) Support TCP fastopen over ipv6, from Daniel Lee.
7) Add software TSO helper functions and use them to support software
TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia.
8) Support software TSO in fec driver too, from Nimrod Andy.
9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.
10) Handle broadcasts more gracefully over macvlan when there are large
numbers of interfaces configured, from Herbert Xu.
11) Allow more control over fwmark used for non-socket based responses,
from Lorenzo Colitti.
12) Do TCP congestion window limiting based upon measurements, from Neal
Cardwell.
13) Support busy polling in SCTP, from Neal Horman.
14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.
15) Bridge promisc mode handling improvements from Vlad Yasevich.
16) Don't use inetpeer entries to implement ID generation any more, it
performs poorly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
tcp: fixing TLP's FIN recovery
net: fec: Add software TSO support
net: fec: Add Scatter/gather support
net: fec: Increase buffer descriptor entry number
net: fec: Factorize feature setting
net: fec: Enable IP header hardware checksum
net: fec: Factorize the .xmit transmit function
bridge: fix compile error when compiling without IPv6 support
bridge: fix smatch warning / potential null pointer dereference
via-rhine: fix full-duplex with autoneg disable
bnx2x: Enlarge the dorq threshold for VFs
bnx2x: Check for UNDI in uncommon branch
bnx2x: Fix 1G-baseT link
bnx2x: Fix link for KR with swapped polarity lane
sctp: Fix sk_ack_backlog wrap-around problem
net/core: Add VF link state control policy
net/fsl: xgmac_mdio is dependent on OF_MDIO
net/fsl: Make xgmac_mdio read error message useful
net_sched: drr: warn when qdisc is not work conserving
...
This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.
Verified by compilation only.
The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
- return ret;
+ return C;
// </smpl>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
..plus some function arg indentation which I haven't noticed at first.
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove typedefs according to the "Chapter 5: Typedefs" from
Documentation/CodingStyle.
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes include:
- Add closing brackets;
- Remove sizeof (_IOR and _IOW macro can accept types);
- Replace _IOW which size of 0 (the last arg) with _IO.
- Actually these macros are not used anywhere and might be removed.
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl error where a static variable was explicitly
initialised to false
Signed-off-by: Angus Gibson <darthshrine@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix coding style issue by wrapping the macro in a do {} while (0).
Signed-off-by: Anders Darander <anders.darander@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net: get rid of SET_ETHTOOL_OPS
Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone.
This does that.
Mostly done via coccinelle script:
@@
struct ethtool_ops *ops;
struct net_device *dev;
@@
- SET_ETHTOOL_OPS(dev, ops);
+ dev->ethtool_ops = ops;
Compile tested only, but I'd seriously wonder if this broke anything.
Suggested-by: Dave Miller <davem@davemloft.net>
Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix checkpatch.pl issues with line over 80 characters in ft1000.h
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following smatch warning:
/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1148 ft1000_proc_drvmsg() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Fix checkpatch.pl issues with __packed is preferred
over __attribute__((packed)) in ft1000_ioctl.h
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes C99 style comments from the driver and whenever
possible attempts to match coding style of the rest of the driver.
Signed-off-by: Daniel Dodge <danieldodgese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_user() may fail and cause 'msgsz' uninitialized, so need give a
check. The related warning (with allmodconfig under hexagon):
CC [M] drivers/staging/ft1000/ft1000-usb/ft1000_debug.o
drivers/staging/ft1000/ft1000-usb/ft1000_debug.c: In function 'ft1000_ioctl':
include/uapi/linux/swab.h:53:9: warning: 'msgsz' may be used uninitialized in this function [-Wuninitialized]
drivers/staging/ft1000/ft1000-usb/ft1000_debug.c:533:17: note: 'msgsz' was declared here
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return variable of request_code_segment() is used uninitialized if
the argument boot_case is false, this patch fixes it.
FYI, in ft1000_usb.h: STATUS_SUCCESS 0, and STATUS_FAILURE 0x1001.
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a few styling issues, particularly:
Lines 36,42: Inserted a space before the open paranthesis.
Line 50: Removed space between function name and open parenthesis.
Lines 56,57: Removed trailing whitespace.
lines: 130, 133: Replaced spaces with tabs for identation.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the following coding style issues:
Lines 84-91,99-106,275,514: Replaced spaces at the start of the lines
with tabs.
Lines 205,271: Inserted spaces after the commas.
Lines 275,1060,1065: Indented the code with tabs instead of spaces.
Line 275: Inserted spaces around '=' and '<', also moved the trailing
statement on the next line.
Line 512: Removed space between function name and open parenthesis.
Line 839: Removed space after '&'.
Line 853: Removed space after '&'.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed the following styling issues:
Line 30:
Removed space before open square bracket '['
Lines 31 to 155:
Moved the commas that were in the start of the lines, to the end of the lines.
Inserted spaces after the commas.
Inserted a one tab indentation to each line.
Signed-off-by: Aldo Iljazi <mail@aldo.io>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file ft1000_hw.c is still full of coding style problems that make it
challenging to read and understand. The lines inside the switch cases
in ft1000_proc_drvmsg() are indented too deeply, so remove one leading
tab. Join lines that are now able to fit in the 80 character limit.
This will take care of the "too many leading tabs" issue. Run
checkpatch.pl on the file, and correct all other issues it reports
(except lines with user visible strings over 80 chars).
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Waskiewicz Jr, Peter P <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function dsp_broadcast_msg_id() has four levels of nesting. Move the
handling for failed allocation for *dpram_blk from the else block at the
end to the block immediately following the test, reverse the sense of the
test, and exit with an error code if the allocation fails. This eliminates
descending into an if block if the allocation is successful. Move all
lines inside the removed block one tab to the left, and join lines
that will fall under the 80 char limit.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ft1000_poll(), in ft1000_hw.c, has many miscellaneous
coding style issues, such as improper indentation, C99 comments, use of
msleep(), and lines over 80 characters. Changes all spaces at the start
of lines to the proper number of tabs. Convert C99 comments to standard
/* */ style. Change calls to msleep(10) to usleep_range(9000, 11000).
Break lines over 80 characters, unless they are user visible strings.
Remove space before open paren in function calls. Fix any other issues
that checkpatch finds.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newly extracted function handle_misc_portid still has several
unnecessary levels of nesting, having inherited its logic from the
original extracted lines. Move handling for failed memory allocation
(of *pdpram_blk) to the top of the function, and return -1 from within
it. This eliminates the if statement around the body of the function.
Change two levels of nested if/else to an if/else-if/else. Create a
label, exit_failure, at the end of the function with the cleanup code,
and goto it at all points of failure. Also, goto it if the call to
ft1000_receive_cmd() fails, instead of descending into an if block if
it succeeds. Pull all lines from inside the former if blocks to the
left, and rejoin lines to take advantage of reclaimed horizontal space.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ft1000_poll, in ft1000_hw.c, is complex, with deep levels
of nesting, unnecessary variables, and style issues. Extract the default
case of the switch statement to its own function, handle_misc_portid.
Make the variable struct dpram_blk *pdpram_blk local to the new function
and remove it from the old. The variable struct pseudo_hdr *ppseudo_hdr is
used only once, to access a member of another struct, so eliminate it
and access the member directly. Return -1 in all the places where the
code fails, and 0 on successful completion. Fix coding style errors.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ft1000_poll, in ft1000_hw.c, is overly complex, with at
least five levels of nesting. Extract the lines in switch case
DSPBCMSGID into their own function, called dsp_broadcast_msg_id(). Pass
one parameter, struct ft1000_usb *dev. Make a copy of struct dpram_blk
*pdpram_blk local to the new function, since it is initialized at the
top of each case in which it appears. Make unsigned long flags local to
the new function. Remove the assignment to struct pseudo_hdr
*ppseudo_hdr, which is otherwise unused in the switch case, and receives
the same assignment at the top of each case in which it appears. Return
an int, 0 for success and -1 for error. Correct style issues in the
extracted lines.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ft1000_poll, in ft1000_hw.c, is overly complex, with at
least five different levels of nesting. While preparing to extract one
of the cases to its own function, I discovered that the variable nxtph
is not used. It is declared and assigned a value in ft1000_poll(), then
passed by reference to the helper function ft1000_receive_command(),
which receives it as parameter. pnxtph does not appear in the body of
this function. Remove all occurrences of nxtph and pnxtph.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ft1000 driver ignores the normal Linux error codes, using its
own macros, STATUS, STATUS_SUCCESS, and STATUS_FAILURE, instead.
Unsigned variables (u16 and u32) are sometimes used to hold them.
This patch converts all occurences of these macros to 0, 0 and -1,
respectively. It also changes the last remaining status variables
(mostly called status and ret) to ints, and removes the declarations
of the macros. This patch does not correct the whitespace issues
in the lines where the changes were made.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file ft1000_hw.c contains formal C99 style function headers that
waste space and convey little to no useful information. This patch
converts the headers to either one line standard /* */ style comments
or shorter standard style headers with parameter lists (if the parameter
list seemed helpful), or eliminates them entirely. Besides needing to be
made of its own accord, this change is in preparation to eliminate the
nonstandard STATUS_* #defines from the driver since they were cited in most
of the headers.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two files in the ft1000 usb driver ignore expected Linux error codes,
and instead use two STATUS_SUCCESS 0, and STATUS_FAILURE
0x1001. This patch removes all remaining occurrences of these from the
file ft1000_download.c. All occurrences of STATUS_SUCCESS have been
replaced by 0, and occurrences of STATUS_FAILURE have been replaced by
-1. One occurence of STATUS_FAILURE has been completely removed:
get_handshake collects either a local #define or 0 from its helper
function, check_usb_db, and immediately sets the collecting variable to
STATUS_FAILURE if the #define is returned. check_usb_db has been
modified to return -1 instead of the #define.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ft1000 usb driver ignores expected Linux error codes, and uses two
values defined in ft1000_usb.h: STATUS_SUCCESS 0, and STATUS_FAILURE
0x1001; and sometimes -1. This patch changes the return values of the
function scram_start_dwnld to match the status of the handshake returned
by its helper functions, get_handshake and get_handshake_usb. If the
handshake fails, -ENETRESET is returned instead of the inappropriate
STATUS_FAILURE. Also, a new test has been added to differentiate failure
due to timeout from failure due to net reset (the default). -ETIMEDOUT
is returned in this case. Finally, 0 is returned on success instead of
STATUS_SUCCESS.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ft1000 usb driver ignores expected Linux error codes, and uses two
values defined in ft1000_usb.h: STATUS_SUCCESS 0, and STATUS_FAILURE
0x1001; and sometimes -1. This patch changes the return value of the
function write_dpram_32_and check to 0 or -EREMOTEIO, respectively. The
relevant change was made in the helper function check_buffers (which is
only called from write_dpram32_and_check); it now returns 0 on success
and -EREMOTEIO on failure, and this is allowed to propagate through
write_dpram32_and_check. Assignments to the return variable status that
are no longer needed were removed as well. In one function up the call
chain, dsp_reload in ft1000_hw.c, the status variable was changed from
u16 to int to avoid collecting a signed value in an unsigned variable.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux uses a return type of int for status codes. The file
ft1000_download.c uses a mixture of u16 and u32. This patch changes all
variables called status or Status to ints, whether they are returned
from the function or not. It also changes the return type of all
functions returning one of the variables to correspond. Also, the
declaration of scram_dnldr has been changed in ft1000_usb.h.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function write_blk, in ft1000_download.c, contains many coding style
issues. It has indentations of 3 spaces, long lines, C99 comments, and
extra whitespace. It also has a return type of u32, and changing the
returned variable in the function triggers a checkpatch leading spaces
warning. Indentation should be fixed throughout the file for
consistency.
This patch fixes those issues, in preparation for correcting the status
return type throughout the file. The variable Status has been changed
from u32 to int and renamed status.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function write_blk is long and overly complex, consisting of a triply
nested loop. It also has improper indentation and line lengths
throughout, and has return type of u32 rather than int. Some of the
lines, when converted to proper indentation, create checkpatch warnings
for too many leading tabs.
This patch extracts the innermost loop into its own function,
write_dpram32_and_check. This removes several levels of indentation from
the extracted lines and makes the original function simpler. Two local
variables from the original function, u16 resultbuffer[] and a loop
counter, have been made local variables of the new function. Two calls
to msleep() have been replaced with usleep_range() as per Documentation/
timers/timers-howto.txt (which was referred to in a checkpatch warning).
Several other style issues in the extracted code have been corrected as
well.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function scram_dnldr, in ft1000_download.c, is very long and consists
mainly of nested switch statements inside a while loop. Some code in one
of the inner switch cases was almost identical to the code in the
previously extracted function request_code_segment. The duplicated code
was replaced with a call to request_code_segment, and
request_code_segment was slightly modified to work in both cases.
A new parameter was added to request_code_segment, a bool to distinguish
which case it was replacing. The name of an existing parameter (now
called endpoint) was changed to reflect the fact that it will be passed
in from more than one place. Several lines from the case containing the
duplicated code were moved to request_code_segment, and a test was added
to determine if these lines or a line from the original function should
be run.
Finally, an unused variable (tempword) was removed from scram_dnldr.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function scram_dnldr in ft1000_download.c is very long and contains many
coding style errors and best practice violations. It consists of nested
switch statements inside a while loop. One of the inner switch cases has
been extracted as a helper function. Also, some style errors (such as
C99 comments) have been fixed, an assignment to an unread variable has
been removed, and break statements inside ifs have been converted to
returns.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function scram_dnldr is over 500 lines long, with deep indents that
trigger checkpatch warnings for too many tabs. It mainly consists of a
switch statement with long, complicated cases. The first case has been
extracted to form the helper function scram_start_dwnld. Some style
issues in the extracted lines have been corrected as well.
Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following warning in ft1000-pcmcia/ft1000_dnld.c-
drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c:307:6-18: WARNING: Assignment of bool to 0/1
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following coccinelle warning in ft1000-usb/ft1000_hw.c -
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1924:9-25: WARNING: Comparison of bool to 0/1
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following coccinelle warning in ft1000-usb/ft1000_hw.c-
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1444:1-19: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1937:16-34: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1938:16-35: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1570:4-22: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1575:4-22: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:636:1-26: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:638:1-25: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:669:1-26: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:755:1-23: WARNING: Assignment of bool to 0/1
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:756:1-26: WARNING: Assignment of bool to 0/1
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following coccinelle error in ft1000-usb/ft1000_download.c -
drivers/staging/ft1000/ft1000-usb/ft1000_download.c:615:1-16: ERROR: Assignment of bool to non-0/1 constant
drivers/staging/ft1000/ft1000-usb/ft1000_download.c:926:5-20: ERROR: Assignment of bool to non-0/1 constant
drivers/staging/ft1000/ft1000-usb/ft1000_download.c:943:7-22: ERROR: Assignment of bool to non-0/1 constant
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Lisa Nguyen <lisa@xenapiadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Thery