When we search a config symbol, if it has no prompt the position of this
symbol in the Kconfig file and it's dependencies are not printed. This
can be inconvenient, especially when it's set to n and we want to find out
why.
the following is an example:
before:
Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type : boolean
Selected by: X86 [=y]
after:
Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type : boolean
Defined at arch/Kconfig:213
Selected by: X86 [=y]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bug was reported that caused localmodconfig to not keep all the
dependencies of ATH9K. This was caused by the kconfig file:
In drivers/net/wireless/ath/Kconfig:
---
if ATH_CARDS
config ATH_DEBUG
bool "Atheros wireless debugging"
---help---
Say Y, if you want to debug atheros wireless drivers.
Right now only ath9k makes use of this.
source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/carl9170/Kconfig"
source "drivers/net/wireless/ath/ath6kl/Kconfig"
source "drivers/net/wireless/ath/ar5523/Kconfig"
source "drivers/net/wireless/ath/wil6210/Kconfig"
endif
---
The current way kconfig works, it processes new source files after the
first file is completed. It creates an array of new source config files
and when the one file is finished, it continues with the next file.
Unfortunately, this means that it loses the fact that the source file is
within an "if" statement, and this means that each of these source file's
configs will not have the proper dependencies set.
As ATH9K requires ATH_CARDS set, the localmodconfig did not see that
dependency, and did not enable ATH_CARDS. When the oldconfig was run, it
forced ATH9K to be disabled.
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1304291022320.9234@oneiric
Cc: stable@vger.kernel.org # 3.8+
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Tested-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a config for a module is added to the list to save in the final
config file, add a print to show what dependencies are used. This is
useful to debug when a config is disabled by the make oldconfig after
localmodconfig is finished.
This print only appears if the environment variable LOCALMODCONFIG_DEBUG
is defined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The C++ compiler is more strict in that it refuses to assign
a void* to a struct list_head*.
Fix that by explicitly casting the poisonning constants.
(Tested with all 5 frontends, now.)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Poirier <bpoirier@suse.de>
Currently the odds to set each symbol is (rounded):
booleans: y: 50% n: 50%
tristates: y: 33% m: 33% n: 33%
Introduce a KCONFIG_PROBABILITY environment variable to tweak the
probabilities (in percentage), as such:
KCONFIG_PROBABILITY y:n split yⓂ️n split
-----------------------------------------------------------------
[1] unset or empty 50 : 50 33 : 33 : 34
[2] N N : 100-N N/2 : N/2 : 100-N
N:M N+M : 100-(N+M) N : M : 100-(N+M)
N:M:L N : 100-N M : L : 100-(M+L)
[1] The current behaviour is kept as default, for backward compatibility
[2] The solution initially implemented by Peter for Buildroot, see:
http://git.buildroot.org/buildroot/commit/?id=3435c1afb5
Signed-off-by: Peter Korsgaard <jacmet@uclibc.org>
[yann.morin.1998@free.fr: add to Documentation/]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For reproducibility, it can be useful to be able to specify the
seed to use to seed the RNG.
Add a new KCONFIG_SEED environment variable which can be set to
the seed to use:
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
It's very usefull for eg. debugging the kconfig parser.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Also, as a side-efect, this patch fixes the following case:
---8<---
choice
config OPTION_A
bool "Option A"
config OPTION_B
bool "Option B"
config OPTION_C
bool "Option C"
endchoice
---8<---
which could previously generate such .config files:
---8<--- ---8<---
CONFIG_OPTION_A=y CONFIG_OPTION_A=y
CONFIG_OPTION_B=y # CONFIG_OPTION_B is not set
# CONFIG_OPTION_C is not set CONFIG_OPTION_C=y
---8<--- ---8<---
Ie., the first entry in a choice is always set, plus zero or one of
the other options may be set.
This patch ensures that only one option may be set for a choice.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>
---
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
For randconfig, if a list of required symbols is specified with
KCONFIG_ALLCONFIG, such symbols do not "have a value" as per
sym_has_value(), but have the "valid" flag set.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Because the modules' symbole (CONFIG_MODULES) may not yet be set when
we check a symbol's tristate capabilty, we'll always find that tristate
symbols are booleans, even if we randomly decided that to enable modules:
sym_get_type(sym) always return boolean for tristates when modules_sym
has not been previously set to 'y' *and* its value calculated *and* its
visibility calculated, both of which only occur after we randomly assign
values to symbols.
Fix that by looking at the raw type of symbols. Tristate set to 'm' will
be promoted to 'y' when their values will be later calculated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The current code does this:
if [ -f /usr/include/ncursesw/curses.h ]; then
echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"'
elif [ -f /usr/include/ncurses/ncurses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
elif [ -f /usr/include/ncurses/curses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"'
[...]
This is merely inconsistent:
- adding the full path to the directory in the -I directive,
- especially since that path is already a sub-path of the system
include path,
- and then repeating the sub-path in the #include directive.
Rationalise each include directive:
- only use the filename in the #include directive,
- keep the -I directives: they are always searched for before the
system include path; this ensures the correct header is used.
Using the -I directives and the filename-only in #include is more in
line with how pkg-config behaves, eg.:
$ pkg-config --cflags ncursesw
-I/usr/include/ncursesw
This paves the way for using pkg-config for CFLAGS, too, now we use it
to find the libraries.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Displays a trail of the menu entries used to get to the current menu.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: small, trivial code re-ordering]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Fixes the memory leak of struct jump_key allocated in get_prompt_str()
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: stable@vger.kernel.org
Viresh noticed when using merge_config.sh that a source softlink
was being created even when he didn't specify the -O option.
The problem arises due to the previous commit 409f117e2d
which added the -O option. Basically if -O is not specified,
we still pass '-O=.' to the make command, which then generates
a source softlink to ./
This patch adds an extra check so if there is no -O specified
to merge_config.sh, we don't pass one on to make.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Reported-and-tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When building ncurses with --with-termlib several symbols get moved from
libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one
additionally needs to link with libtinfo.so.
The ncurses pkg-config module will be used to detect the necessary libs for
linking. If not available the old way of directly specifying libs will be
used.
Signed-off-by: Justin Lecher <jlec@gentoo.org>
[yann.morin.1998@free.fr: fix typo: '-ncurses' --> '-lncurses']
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When building ncurses with --with-termlib several symbols get moved from
libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one
additionally needs to link with libtinfo.so.
The ncurses pkg-config module will be used to detect the necessary libs for
linking. If not available the old heuristic for detection of the ncurses libs
will be used.
Signed-off-by: Justin Lecher <jlec@gentoo.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
According to Documentation/kbuild/kconfig.txt, the commands:
yes "" | make oldconfig >conf.new
grep "(NEW)" conf.new
should list the new config symbols with their default values.
However, currently there is no line break after each new symbol. When
kconfig is interactive the user will type a new-line at this point,
but when non-interactive kconfig must print it.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reference: http://bugs.debian.org/636029
[regid23@nt1.in: Adjusted Ben's work to apply cleanly to this tree]
Reported-and-tested-by: Regid Ichira <regid23@nt1.in>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
>From: Roland Eggner <edvx1@systemanalysen.net>
More reasonable labels of function keys line. Rename labels and keep menu
width, as required for fitting on COLUMNS=80 terminals:
• s/Insts/Help 2/
• s/Config/ShowAll/
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
>From: Roland Eggner <edvx1@systemanalysen.net>
Rewrite all help texts. During several years lazy (incomplete) updates have
left behind a rather thick layer of dust. Intentions:
(1) Global help called by <F1> should document all _currently_ implemented
keybindings.
(2) Different help texts called by <F3> resp. <F8><F1> should be consistent
with (1) and with implementation:
• on plain menu entry
• in radiolist window
• in input windows for text, decimal or hexadecimal values
• in filename selection windows <F6> <F7>
• SymSearch specific help called by <F8> followed by <F1>
(3) More reasonable window titles:
Rename window title s/README/Global help/
Rename variable s/nconf_readme/nconf_global_help/
Rename window title s/Instructions/Short help/
(4) Consider which hints are most useful for first-time-users.
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: a few additional fixes]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When using make xconfig, the following compilation error appears :
/usr/include/qt3/qvaluelist.h:427:13: error: ‘ptrdiff_t’ does not name a type
Including stddef.h in scripts/kconfig/qconf.cc permits to avoid this error.
Signed-off-by: Tiana Rakotovao Andriamahefa <rkmahefa@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
• In function keys line descriptions black on darkblue are almost
impossible to read. Change colors to black on brown.
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now we have Load/Save buttons to do the Load/Save
in the convenient place, so we can drop the
top-level entries.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
If menuconfig have Save/Load button like alternative
.config editors, xconfig, nconfig, etc.We will have
a obvious benefit when use menuconfig just like
when we use others, we can Save/Load our .config quickly
and conveniently.
This patch add the Save/Load button for menuconfig.
[remove trailing space while at it for below line:
"*) Formerly when I used Page Down and Page Up, the cursor would be set"
]
Changes:
V1-V2:
1:use PATH_MAX instead of hard code suggested by Yann E. MORIN
2:drop the spurious empty-line removal suggested by Yann E. MORIN
V2-V3:
1:ajust buttons position well centered reported by Yann E. MORIN
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
dialog.h has two line the same below:
extern char dialog_input_result[];
This patch remove one of them.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This patch add support navigate input position *inside* the input
field with LEFT/RIGHT, so it is possible to modify the text in place.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that we get the CONFIG_ prefix from the environment, we must
ensure we use the proper prefix in case the user has it set in
the environment.
Simply unexport CONFIG_ to fallback to our hard-coded default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Provide a -O option to specify dir to put generated .config
Then merge_config.sh does not need to be copied to target dir,
for easy re-usage in other script
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, the CONFIG_ prefix is hard-coded in the kconfig frontends
executables. This means that two projects that use kconfig with
different prefixes can not share the same kconfig frontends.
Instead of hard-coding the prefix in the frontends, get it from the
environment, and revert back to hard-coded value if not found.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, we get the CONFIG_ prefix via the CONFIG_ macro, which means
the CONFIG_ prefix is hard-coded at compile time. This goes against
having a run-time defined CONFIG_ prefix.
Add a function that returns the CONFIG_ prefix to use (but keep the
current hard-coded behavior, to be changed in a later patch).
To avoid touching all the code that uses the CONFIG_ macro, we just
undef it, and define it to be a call to the function.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Having the CONFIG_ prefix in string constants gets in the way of
using a run-time-defined CONFIG_ prefix.
Fix that by using temp growable strings (gstr) in which we printf
the text.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The ncurses library allows for extended colors. The support for extended
colors support depends on wide-character support. ncurses headers
enable extended colors (NCURSES_EXT_COLORS) only when wide-character
support is enabled (NCURSES_WIDECHAR).
The "make menuconfig" uses wide-character ncursesw library, which can be
compiled with wide-character support, but does not define NCURSES_WIDECHAR
and it's using headers without wide-character (and extended colors) support.
This fixes problems with colors on systems with enabled extended colors
(like PLD Linux). Without this patch "make menuconfig" is hard to use.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
sys/queue.h and CIRCLEQ in particular have proven to cause portability
problems (reported on Debian Sarge, Cygwin and FreeBSD)
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kconfig changes from Michal Marek:
"kconfig in v3.7 is going to
- initialize ncurses only once in menuconfig
- be able to jump to a search result in menuconfig
- change the misnomer oldnoconfig to a more meaningful name
olddefconfig, keeping the old name as alias"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
menuconfig: Assign jump keys per-page instead of globally
menuconfig: Do not open code textbox scroll up/down
menuconfig: Add jump keys to search results
menuconfig: Extend dialog_textbox so that it can return to a scrolled position
menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses
menuconfig: Remove superfluous conditionnal
kconfig: document oldnoconfig to what it really does in conf.c
kconfig/mconf.c: revision of curses initialization.
Pull kbuild fixes from Michal Marek:
"Here are two fixes I intended to send after v3.6-rc7, but failed to do
so. So please pull them for v3.7-rc1 and they will be picked up by
stable.
The first one fixes gcc -x <language> syntax in various build-time
tests, which icecream and possible other gcc wrappers did not
understand (and yes, icecream is going to be fixed as well).
The second one fixes make tar-pkg so that unpacking the tarball does
not replace the /lib -> /usr/lib symlink on recent Fedora releases."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix gcc -x syntax
kbuild: Do not package /boot and /lib in make tar-pkg
The correct syntax for gcc -x is "gcc -x assembler", not
"gcc -xassembler". Even though the latter happens to work, the former
is what is documented in the manual page and thus what gcc wrappers
such as icecream do expect.
This isn't a cosmetic change. The missing space prevents icecream from
recognizing compilation tasks it can't handle, leading to silent kernel
miscompilations.
Besides me, credits go to Michael Matz and Dirk Mueller for
investigating the miscompilation issue and tracking it down to this
incorrect -x parameter syntax.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The kbuild target 'localyesconfig' has been same as 'localmodconfig'
since the commit 50bce3e "kconfig/streamline_config.pl: merge
local{mod,yes}config". The commit expects this script generates
different configure depending on target, but it was not yet implemented.
So I added code that sets to 'yes' when target is 'localyesconfig'.
Link: http://lkml.kernel.org/r/1349101470-12243-1-git-send-email-yuta.and@gmail.com
Cc: stable@vger.kernel.org # v3.2
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Yuta Ando <yuta.and@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@rostedt.homelinux.com>
As 67d34a6a39 said, 'oldnoconfig' doesn't
set new symbols to 'n', but instead sets it to their default values.
So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making
people confused, and keep the old name 'oldnoconfig' as an alias,
because people already are dependent on its behavior with the
counter-intuitive name.
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
At the moment, keys 1-9 are assigned to the first 9 search results. This patch
makes them assigned to the first 9 results per-page instead. We are much less
likely to run out of keys that way.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We don't need to explicitely use ncurses' scroll(). ncurses performs
vertical-motion optimization at wrefresh() time.
Using strace I confirmed that with the following patch curses still sends only
the new line of text to the terminal when scrolling up/down one line at a
time.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
makes it possible to jump directly to the menu for a configuration entry after
having searched for it with '/'. If this menu is not currently accessible we
jump to the nearest accessible parent instead. After exiting this menu, the
user is returned to the search results where he may jump further in or
elsewhere.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We can now display other UI elements (menus) "on top" of a textbox and then
seemingly come back to it in the same state it was left.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The caller will be able to perform actions based on hotkeys in the displayed
text.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Because end_reached is set to 0 before the loop, the test "!end_reached" is
always true and can be removed. This structure was perhaps copied from the
similar one in back_lines().
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As 67d34a6a39 said, the make target
'oldnoconfig' is a misnomer. It doesn't set new symbols to 'n', but
instead sets it to their default values.
This patch fixes the document in conf.c, and will submit another patch
to replace 'oldnoconfig' to 'olddefconfig'
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since commit d0e1e09568 initscr() is called twice in mconf.
Do it only in init_dialog() in util.c and there also save the
cursor position for the signal handler in mconf.c.
Signed-off-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
perlcritic complains about $kconfig being reused in the foreach loop
at the end of read_kconfig. Change it to a my variable.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Convert remaining open calls to use the perl's preferred 3 parameter
open.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change find_config function to read_config. It now finds the config,
reads the config into an array, and returns the array. This makes it
a little cleaner and changes the open to use perl's 3 option open.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running streamline_config.pl as it's shown it in the comment header,
you will get a warning about $ksource being uninitialized. This is
because $ksource is set to ARGV[0], but the examples don't require any
arguments. Fix by setting ksource to . if no ARGV[0] is given.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=pYw7
-----END PGP SIGNATURE-----
Merge tag 'localmodconfig-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
Pull localmodconfig updates from Steven Rostedt:
"Improve localmodconfig to remove even more unused module configs.
These changes drastically improve the amount of module configs removed
from a config file. It also adds some debug that I can have users
easily enable if things do not work for them."
* tag 'localmodconfig-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
localmodconfig: Add debug environment variable LOCALMODCONFIG_DEBUG
localmodconfig: Check if configs are already set for selects
localmodconfig: Read in orig config file to avoid extra processing
localmodconfig: Comments and cleanup for streamline_config.pl
The make target 'oldnoconfig' is a misnomer. It doesn't set new symbols
to 'n', but instead sets it to their default values.
Unfortunately, assuming that it actually did this, broke ktest in some
of its tests. For example, the tests to create a minimum config and even
a config bisect, depends on removing various configs and using
oldnoconfig to get rid of other configs that may have depended on it.
But because some configs that it was trying to disable, were in fact
default enabled, this caused those configs to re-enable and corrupt the
test.
I thought about fixing oldnoconfig, but I'm afraid that people are
already dependent on its current behavior. Instead, I'm just updating
the documentation to state that it sets the new symbols to their default
values and not to 'n'.
Ideally, this would be called, 'olddefconfig' and we have an
'oldnoconfig' that actually disables the new symbols. But it's useless
for me now. If it changed, ktest would need to be consistent between
each version, and that would be to difficult to detect. I'll handle this
issue with ktest with other means.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
They function just like they do in less(1).
Also correct some discrepancy between the help text and the code wrt
function keys.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length
of a config file line can exceed the 1024 byte buffer.
Switch from fgets to compat_getline to fix. compat_getline is an
internally implimented getline work-alike for portability purposes.
Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 5a6f8d2bd9 ("kconfig: nuke
LKC_DIRECT_LINK cruft") removed all traces of lkc_defs.h from the tree.
Remove its entries in dontdiff and kconfig's .gitignore file too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Also add a dependency on .tmp_qtcheck for KC_QT_MOC.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Various schemes exist to allow parallel installations of multiple major
versions of Qt (4.x with the previous 3.x and/or the upcoming 5.x).
QtCore.pc includes a moc_location variable which should be a more reliable
way to find moc.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Import libraries on Cygwin and MinGW/MSYS use the .dll.a suffix, so
checking this suffix is necessary to make sure ncurses will still be
found when built without static libraries.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 8c41e5e363 added a check for
ncursesw/curses.h for the case where ncurses and ncursesw are build
separately but only one is installed. But if both are installed,
the headers ncurses/curses.h and ncursesw/curses.h differ, and since
libncursesw will be found first, so should ncursesw/curses.h.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
ESCDELAY is a global variable which is replaced by getter and setter
functions with NCURSES_REENTRANT. This fixes the following error:
nconf.c: In function ‘main’:
nconf.c:1506:2: error: lvalue required as left operand of assignment
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If the environment variable LOCALMODCONFIG_DEBUG is set, then debug output
will appear in the make localmodconfig. This will simplify debugging what
people get with their output, as I can just tell people to do:
LOCALMODCONFIG_DEBUG=1 make localmodconfig 2>out.txt
and have them send me the out.txt. I'll be able to see why things are not
working as they think it should be.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are some cases that a required module does not have a prompt
and needs to have another module enabled that selects it to be set.
As localmodconfig is conservative and tries to make the minimum config
without breaking the user's kernel, or keeping the user from using
devices that were loaded when the lsmod was done, all modules that
select this module will also be enabled.
If you needed module A, but module A did not have a prompt but needed
module B to be selected, localmodconfig would make sure B was still
enabled. If not only B selected A, but C, D, E, F, and G also
selected A, then all of those would also be included, as well as the
modules they depend on. This ballooned the number of configs that
localmodconfig would keep.
The fix here is to process the depends first, and then record those
configs that did not have a prompt and needed to be selected.
After the depends are done, check what configs are needed to select
the configs in the list, and if a config that selects it is already
set, then we don't need to do anything else.
If no config that selects the config is set, then just pick one and
try again.
This change brought down the number of selected modules from 290
to 67! Both before and after were run against a config that had 3095
modules enabled.
Tested-by: John David Yost <johnyost@ptd.net> # AlleyTrotter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Read in the entire config file. If there's a config that we depend on
that happens to be in the core set (not a module) then we do not need
to process it as a module.
Currently, we follow the entire depend and selects even if they
are enabled as core and not modules. By checking to make sure that we
only look at modules we can drop the count a little.
From one of my tests, localmodconfig went from taking 3095 set modules
down to 356 before this patch, and down to 290 modules after the change.
Tested-by: John David Yost <johnyost@ptd.net> # AlleyTrotter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added some more comments and cleaned up part of the the code to use
a named variable instead of one of the special $1 perl variables.
No functional changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull kconfig changes from Michal Marek:
- Error handling for make KCONFIG_ALLCONFIG=<...> all*config plus a fix
for a bug that was exposed by this
- Fix for the script/config utility.
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/config: properly report and set string options
kbuild: all{no,yes,mod,def,rand}config only read files when instructed to.
kconfig: Add error handling to KCONFIG_ALLCONFIG
Hardware with MCA bus is limited to 386 and 486 class machines
that are now 20+ years old and typically with less than 32MB
of memory. A quick search on the internet, and you see that
even the MCA hobbyist/enthusiast community has lost interest
in the early 2000 era and never really even moved ahead from
the 2.4 kernels to the 2.6 series.
This deletes anything remaining related to CONFIG_MCA from core
kernel code and from the x86 architecture. There is no point in
carrying this any further into the future.
One complication to watch for is inadvertently scooping up
stuff relating to machine check, since there is overlap in
the TLA name space (e.g. arch/x86/boot/mca.c).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Prevent subtle surprises to both people working on the kconfig code
and people using make allnoconfig allyesconfig allmoconfig and
randconfig by only attempting to read a config file if
KCONFIG_ALLCONFIG is set.
Common sense suggests attempting to read the extra config files does
not make sense unless requested. The documentation says the code
won't attempt to read the extra config files unless requested.
Current usage does not appear to include people depending on the code
reading the config files without the variable being set So do the
simple thing and stop reading config files when passed
all{no,yes,mod,def,rand}config unless KCONFIG_ALLCONFIG environment
variable is set.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
- Only try to read the file specified if KCONFIG_ALL_CONFIG is set to
something other than the empty string or "1".
- Don't use stat to check the name passed to conf_read_simple so that
zconf_fopen can find the file in the current directory or in SRCTREE
removing a extremely source of confusing failure, where KCONFIG_ALL_CONFIG
was not interpreted with respect to the directory make was called in.
- If conf_read_simple fails complain clearly and stop processing.
Allowing the simple debugging of typos.
- Clearly document the behavior so it is clear to users which
values are treated as flags and which values are treated as
filenames.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 953742c8fe.
Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something. We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide a -r option to display when fragments contain redundant
options. This is really useful when breaking apart a config into
fragments, as well as cleaning up older fragments.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Somehow the merge_config.sh script didn't get its execute bit
set when it was merged. Fix this.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Take the first config fragment and use it verbatim as the initial config
set. This avoids running the verification loop for the first file, as
nothing has actually been merged at this point. This significantly
increases performance for large config fragments.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Running `oldconfig' after any of the following configuration change:
either trivial addition, such as:
config A
bool "A"
choice
prompt "Choice ?"
depends on A
config CHOICE_B
bool "Choice B"
config CHOICE_C
bool "Choice C"
endchoice
or more tricky change:
OLD KCONFIG | NEW KCONFIG
|
| config A
| bool "A"
|
choice | choice
prompt "Choice ?" | prompt "Choice ?"
|
config CHOICE_C | config CHOICE_C
bool "Choice C" | bool "Choice C"
|
config CHOICE_D | config CHOICE_D
bool "Choice D" | bool "Choice D"
endchoice |
| config CHOICE_E
| bool "Choice E"
| depends on A
| endchoice
will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.
Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.
Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
menuconfig: fix a regression when canceling the prompt dialog at exit
kbuild: Fix compiler warning with assertion when calling 'fwrite'
Improve update-po-config output
menuconfig: let make not report error when not save configuration
merge_config.sh: fix bug in final check
merge_config.sh: whitespace cleanup
merge_config.sh: use signal names compatible with dash and bash
kconfig: add merge_config.sh script
kconfig: use xfwrite wrapper function to silence warnings
kconfig: fix set but not used warnings
kconfig: fix warnings by specifing format arguments
This commit fixes a bug, while introducing a new one..
commit 7203ddbd4be9720649e47d756a001e0c7d7f8ae2
Author: Wang YanQing <udknight@gmail.com>
Date: Thu Jan 12 11:31:32 2012 +0800
menuconfig: let make not report error when not save configuration
Pressing ESC should cancel the yes/no dialog and return back to
the main menu, but not exit from menuconfig.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Reinhard Tartler discovered a corner case of calling xfwrite() where the
length of the string is zero.
Arnaud Lacombe suggested to use assertion for the corner case, as
fwrite(3) is currently used:
1) in comment printers. Empty comment are not allowed.
2) in a callback passed to expr_print(), where the string printed is
either NULL OR non-empty.
3) in the lexer, auto-generated, and unused.
I feel using assertion is a good solution:
1) It cleanly takes care of the above-mentioned corner case.
2) It can be easily disabled by defining NDEBUG.
3) It asserts xfwrite() is simply a wrapper for fwrite().
Reported-by: Reinhard Tartler <Reinhard.Tartler@informatik.uni-erlangen.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Make the V=0 output from update-po-config be aligned correctly.
Also remove an outdated comment and add a "GEN" statement.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
I find every time when I choice the 'NO' button at the dialog
which let me choice whether to save the configuration before exit
menuconfig, it always report the blow:
" GEN /mnt/sda7/home/build/test/Makefile
HOSTCC scripts/kconfig/mconf.o
HOSTLD scripts/kconfig/mconf
scripts/kconfig/mconf Kconfig
Your configuration changes were NOT saved.
make[2]: *** [menuconfig] Error 1
make[1]: *** [menuconfig] Error 2
make: *** [sub-make] Error 2 "
This patch repair it.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Arnaud Lacombe pointed out the final checking that the requested configs
were included in the final .config was broken.
The example was that if you had a fragment that disabled
CONFIG_DECOMPRESS_GZIP applied to a normal defconfig, there would be no
final warning that CONFIG_DECOMPRESS_GZIP was acutally set in the final
.config.
This bug was introduced by me in v3 of the original patch, and the
following patch reverts the invalid change.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reported-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fix whitespace usage in the clean_up routine.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The SIGHUP SIGINT and SIGTERM names caused failures when running
merge_config.sh with the dash shell. Dropping the "SIG" component makes
the script work in both bash and dash.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
After noticing almost every distro has their own method of managing config
fragments, I went looking at some best practices, and wanted to try to
consolidate some of the different approaches so this fairly simple
infrastructure can be shared (and new distros/build systems don't have to
implement yet another config fragment merge script).
This script is most influenced by the Windriver tools used in the Yocto
Project, reusing some portions found there.
This script merges multiple config fragments, warning on any overridden
values. It then sets any unspecified values to their default, then
finally checks to make sure no specified value was dropped due to
unsatisfied dependencies.
I'm sure this implementation won't work for everyone, and I expect it will
need to evolve to adapt for various use cases. But I think its a
reasonable starting point.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Reinhard Tartler <Reinhard.Tartler@informatik.uni-erlangen.de>
Cc: Dmitry Fink <Dmitry.Fink@palm.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Bruce Ashfield <Bruce.Ashfield@windriver.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Thomas Lange reported that when he did a 'make localmodconfig', his
config was missing the brcmsmac driver, even though he had the module
loaded.
Looking into this, I found the file:
drivers/net/wireless/brcm80211/brcmsmac/Makefile
had the following in the Makefile:
MODULEPFX := brcmsmac
obj-$(CONFIG_BRCMSMAC) += $(MODULEPFX).o
The way streamline-config.pl works, is parsing all the
obj-$(CONFIG_FOO) += foo.o
lines to find that CONFIG_FOO belongs to the module foo.ko.
But in this case, the brcmsmac.o was not used, but a variable in its place.
By changing streamline-config.pl to remember defined variables in Makefiles
and substituting them when they are used in the obj-X lines, allows
Thomas (and others) to have their brcmsmac module stay configured
when it is loaded and running "make localmodconfig".
Reported-by: Thomas Lange <thomas-lange2@gmx.de>
Tested-by: Thomas Lange <thomas-lange2@gmx.de>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Simplify the way lines ending with backslashes (continuation) in Makefiles
is parsed. This is needed to implement a necessary fix.
Tested-by: Thomas Lange <thomas-lange2@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 5c48b108 ("um: take arch/um/sys-x86 to arch/x86/um") broke the
make target update-po-config, as its symlink trick (again) fails.
(Previous breakage was fixed with commit bdc69ca4 ("kconfig: change
update-po-config to reflect new layout of arch/um").)
The new UML layout allows to drop the symlick trick entirely. And if,
one day, another architecture supports UML too, that should now work
without again breaking this make target.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Use the xfwrite wrapper function defined in lkc.h to check the return value of
fwrite and silence these warnings.
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/zconf.tab.c: In function 'header_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Remove set but not used variables to fix warnings.
HOSTCC scripts/kconfig/gconf.o
/usr/src/lto/scripts/kconfig/gconf.c: In function 'change_sym_value':
/usr/src/lto/scripts/kconfig/gconf.c:833:11: warning: variable 'oldval' set but not used [-Wunused-but-set-variable]
/usr/src/lto/scripts/kconfig/gconf.c: In function 'update_tree':
/usr/src/lto/scripts/kconfig/gconf.c:1281:19: warning: variable 'prop' set but not used [-Wunused-but-set-variable]
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Specify format arguments to fix warnings.
HOSTCC scripts/kconfig/gconf.o
/usr/src/lto/scripts/kconfig/gconf.c: In function 'on_introduction1_activate':
/usr/src/lto/scripts/kconfig/gconf.c:686:6: warning: format not a string literal and no format arguments
/usr/src/lto/scripts/kconfig/gconf.c: In function 'on_about1_activate':
/usr/src/lto/scripts/kconfig/gconf.c:704:6: warning: format not a string literal and no format arguments
/usr/src/lto/scripts/kconfig/gconf.c: In function 'on_license1_activate':
/usr/src/lto/scripts/kconfig/gconf.c:723:6: warning: format not a string literal and no format arguments
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
to make it easier to locate begin/end when editing long strings;
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Acked By: Nir Tzachar <nir.tzachar@gmail.com>
The original dialog_inputbox doesn't work with longer than prompt_width
strings, here fixed it in this way:
1) add variable cursor_form_win to record cursor of form_win,
keep its value always between [0, prompt_width-1];
reuse the original cursor_position as cursor of the string result,
use (cursor_position-cursor_form_win) as begin offset to show part of
the string in form_win;
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
To support unlimited length string config items;
No check for realloc return value keeps code simple, and to be
consistent with other existing unchecked malloc in kconfig.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
In case KEY_BACKSPACE / KEY_DC to delete a char, it memmove only
(len-cursor_position+1) bytes;
the default case is to insert a char, it should also memmove exactly
(len-cursor_position+1) bytes;
the original use of (len+1) is wrong and may access following memory
that doesn't belong to result, may cause SegFault in theory;
case KEY_BACKSPACE:
if (cursor_position > 0) {
memmove(&result[cursor_position-1],
&result[cursor_position],
len-cursor_position+1);
cursor_position--;
}
break;
case KEY_DC:
if (cursor_position >= 0 && cursor_position < len) {
memmove(&result[cursor_position],
&result[cursor_position+1],
len-cursor_position+1);
}
break;
default:
if ((isgraph(res) || isspace(res)) &&
len-2 < result_len) {
/* insert the char at the proper position */
memmove(&result[cursor_position+1],
&result[cursor_position],
len-cursor_position+1);
result[cursor_position] = res;
cursor_position++;
}
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Acked-by: Nir Tzachar <nir.tzachar@gmail.com>
Some variables were being set but never used, which was triggering
warnings in GCC >= 4.6.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
I recently got bitten in the ass when pressing Ctrl-C and lost all my current
configuration changes. This patch captures SIGINT and allows the user to save
any changes.
Some code refactoring was made in order to handle the exit behavior.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.
Fix this by always generating these entries for named symbol.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Help text under choice menu is never displayed because it does not have
symbol name associated with it, however many kconfigs have help text
under choice, assuming that it will be displayed when user selects help.
for example in Kconfig if we have:
choice
prompt "Choice"
---help---
HELP TEXT ...
config A
bool "A"
config B
bool "B"
endchoice
Without this patch "HELP TEXT" is not displayed when user selects help
option when "Choice" is highlighted from menuconfig or xconfig or
gconfig.
This patch changes the logic in menu_get_ext_help to display help for
cases which dont have symbol names like choice.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Reviewed-by: Stuart Menefy <stuart.menefy@st.com>
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
After commit 5416857867, nohelp_text' is no
longer referenced, nuke it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The two targets `localmodconfig' and `localyesconfig' only differs from the
sed(1) ran on the result of `streamline_config.pl' to convert symbols set to
`modules' to `yes'. This conversion can be made directly from the perl script,
and thus avoid duplicating the command to generate the configuration.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
The options introduced are --localmodconfig (default) and --localyesconfig.
They match the Makefile target behavior.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()
xconfig: Abort close if configuration cannot be saved
kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h
kconfig/nconf: remove useless conditionnal
kconfig/nconf: prevent segfault on empty menu
kconfig/nconf: use the generic menu_get_ext_help()
nconfig: Avoid Wunused-but-set warning
kconfig/conf: mark xfgets() private
kconfig: remove pending prototypes for kconfig_load()
kconfig/conf: add command line options' description
kconfig/conf: reduce the scope of `defconfig_file'
kconfig: use calloc() for expr allocation
kconfig: introduce specialized printer
kconfig: do not overwrite symbol direct dependency in assignment
kconfig/gconf: silent missing prototype warnings
kconfig/gconf: kill deadcode
kconfig: nuke LKC_DIRECT_LINK cruft
kconfig: nuke reference to SWIG
kconfig: add missing <stdlib.h> inclusion
kconfig: add missing <ctype.h> inclusion
...
Fix up conflicts in scripts/kconfig/Makefile
Replace the config_is_*() macros with a variant that allows for grepping
for usage of CONFIG_* options in the code. Usage:
if (IS_ENABLED(CONFIG_NUMA))
or
#if IS_ENABLED(CONFIG_NUMA)
The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
the option is 'm'. Only boolean and tristate options are supported.
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Give the user an opportunity to fix the error or save the configuration
under a different path.
Reported-by: Hiromu Yakura <hiromu1996@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The specialized printer for headers (espectially autoconf.h) is missing
fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
warn for such missing prefix, this code is needed. Fix this.
In the same time, fix some nits in `header_print_symbol()'.
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Broken-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
After the test
if (!submenu || ...)
continue;
the variable `submenu' can _not_ be NULL, so do not test for this
situation.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
nconf does not check the validity of the current menu when help is
requested (with either <F2>, '?' or 'h'). This leads to a NULL pointer
dereference when an empty menu is encountered.
The following reduced testcase exposes the problem:
config DEP
bool
menu "FOO"
config BAR
bool "BAR"
depends on DEP
endmenu
Issue will happen when entering menu "FOO" and requesting help.
nconf is the only front-end which do not filter the validity of the
current menu. Such filter can not really happen beforehand as other key
which does not deals with the current menu might be entered by the user,
so just bails out earlier if we encounter an invalid menu.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Cc: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Reported-by: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
nconf is the only front-end which does not use this helper, but prefer
to copy/paste the code. The test wrt. menu validity added in this
version of the code is bogus anyway as an invalid menu will get
dereferenced a few line below by calling menu_get_prompt().
For now, convert nconf to use menu_get_ext_help(), as do every other
front-end. We will deals with menu validity checks properly in a
separate commit.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Cc: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
I am seeing Wunused-but-set warning while make nconfig. Looks like
active_menu is not used. Removing it fixes the warning.
Signed-off-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This function has not much reason to be public. In the mean time, convert
declaration from K&R C to ISO C.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Commit 5a6f8d2bd9 removed `kconfig_load()',
however, it missed an hidden prototypes in `lkc.h'. Fix this.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
This variable is not used outside of main() so there is not much reason keeping
it global. Ensure it is initialized as gcc has no way to know that normal
execution path expect only one option switch to be given on the command line
(except when we request help). As a result, we always initialize
`defconfig_file' before using it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.
conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Considering the following configuration:
config F
bool "F"
choice AB
bool "AB"
config A
bool "A"
config B
bool "B"
endchoice
if A
config D
bool
default y if F
select E
config E
bool "E"
endif
if B
config D
bool
default y if F
select E
config E
bool "E"
endif
The following configuration:
CONFIG_F=y
CONFIG_A=y
# CONFIG_B is not set
CONFIG_D=y
CONFIG_E=y
emits a spurious warning:
(D) selects E which has unmet direct dependencies (B)
If a symbol appears in two different branch of the tree, it should inherit the
dependency of both parent, not just the last one.
Reported-by: Yann E. Morin <yann.morin.1998@anciens.enib.fr>
Tested-by: Yann E. Morin <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As the `gconf' frontend is un-maintained, go the easy way by silencing
the "warning: no previous prototype for '<fn>'" warnings.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
The only call site of renderer_toggled() has been commented out since Apr. 2003,
as per Linus' Linux history repository:
commit e7f67eb3c0570aa50c1cc0707b478a6d93bdc255
Author: Roman Zippel <zippel@linux-m68k.org>
Date: Fri Apr 4 04:18:05 2003 -0800
[PATCH] gconf update
A gconf update by Romain Li<C3><A9>vin <roms@tilp.info>
- fixed bug when double-clicking for changing value.
- expand row when enabling a row with a submenu.
- various bug fixes
As this result in a warning:
scripts/kconfig/gconf.c:891:13: warning: 'renderer_toggled' defined but not used
just nuke that code.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
For strings and integers, the config_is_xxx macros are useless and
sometimes misleading:
#define CONFIG_INITRAMFS_SOURCE ""
#define config_is_initramfs_source() 1
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Avoid to have multiple path saving the config. This fixes an error check
miss when the window is being closed and the user requested the config
to be written.
Reported-by: Hiromu Yakura <hiromu1996@gmail.com>
Pointed-out-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When the gconfig program starts in full mode view, it shows the
left treeview which belongs to the 'split mode view'. The patch
fix this visual issue.
Signed-off-by: Eduardo Silva <edsiper@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Due to the large amount of rows in the treeviews, is difficult to
match columns with rows, setting the rules hint to 'true' allows the
treeview to alternate background colors in the rows making the data
more readable.
Signed-off-by: Eduardo Silva <edsiper@gmail.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
this will allow to use to use
if(config_is_xxx())
if(config_is_xxx_module())
in the code instead of
#ifdef CONFIG_xxx
#ifdef CONFIG_xxx_MODULE
and now let the compiler remove the non usefull code and not the
pre-processor
as done in the mach-types for arm as exmaple
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Ignore the return value from wattrset since we ignore the return
value in nconf.gui.c as well.
scripts/kconfig/nconf.c: In function 'print_function_line':
scripts/kconfig/nconf.c:376: warning: value computed is not used
scripts/kconfig/nconf.c:380: warning: value computed is not used
scripts/kconfig/nconf.c:387: warning: value computed is not used
scripts/kconfig/nconf.c: In function 'show_menu':
scripts/kconfig/nconf.c:956: warning: value computed is not used
scripts/kconfig/nconf.c:961: warning: value computed is not used
scripts/kconfig/nconf.c:963: warning: value computed is not used
scripts/kconfig/nconf.c:965: warning: value computed is not used
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now that we detect recusrion of sourced files, get rid of
now unused flags.
Regenerate lex.zconf.c_shipped file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Allow 'source'ing the same file from multiple places (eg. from
different files, and/or under different conditions).
To avoid circular inclusion, scan the source-ancestry of the
current file, and abort if already sourced in this branch.
Regenerate the pre-parsed lex.zconf.c_shipped file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
commit 40aee729b3 ('kconfig: fix default
value for choice input') fixed some cases where kconfig would select
the wrong option from a choice with a single valid option and thus
enter an infinite loop.
However, this broke the test for user input of the form 'N?', because
when kconfig selects the single valid option the input is zero-length
and the test will read the byte before the input buffer. If this
happens to contain '?' (as it will in a mips build on Debian unstable
today) then kconfig again enters an infinite loop.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@kernel.org [2.6.17+]
Signed-off-by: Michal Marek <mmarek@suse.cz>
OK, the copyright allows you to write a copy, still I think the lawyers
prefer the correct spelling.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
LKML-Reference: <1295899921-11333-1-git-send-email-u.kleine-koenig@pengutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
nconf: handle comment entries within choice/endchoice
kconfig: fix warning
kconfig: Make expr_copy() take a const argument
kconfig: simplify select-with-unmet-direct-dependency warning
kconfig: add more S_INT and S_HEX consistency checks
kconfig: fix `zconfdebug' extern declaration
kconfig/conf: merge duplicate switch's case
kconfig: fix typos
kbuild/gconf: add dummy inline for bind_textdomain_codeset()
kbuild/nconf: fix spaces damage
kconfig: nuke second argument of conf_write_symbol()
kconfig: do not define AUTOCONF_INCLUDED
kconfig: the day kconfig warns about "select"-abuse has come
Equivalent to af6c1598 (kconfig: handle comment entries within
choice/endchoice), but for nconfig instead.
Implement support for comment entries within choice groups. Comment entries
are displayed visually distinct from normal configs, and selecting them is
a no-op.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This lead to non-selected, non-user-selectable options to be written
out to .config. This is not only pointless, but also preventing the
user to be prompted should any of those options eventually become
visible (e.g. by de-selecting the *_AUTO options the "visible"
attribute was added for.
Furthermore it is quite logical for the "visible" attribute of a menu
to control the visibility of all contained prompts, which is what the
patch does.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
In file included from scripts/kconfig/zconf.tab.c:2502:
scripts/kconfig/expr.c:1033: warning: no previous prototype for 'expr_simplify_unmet_dep'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fixes
scripts/kconfig/expr.c: In function ‘expr_get_leftmost_symbol’:
scripts/kconfig/expr.c:1026:2: warning: passing argument 1 of ‘expr_copy’ discards qualifiers from pointer target type
scripts/kconfig/expr.c:67:14: note: expected ‘struct expr *’ but argument is of type ‘const struct expr *’
Signed-off-by: Michal Marek <mmarek@suse.cz>
This is an attempt to simplify the expressing printed by kconfig when a
symbol is selected but still has direct unmet dependency.
First, the symbol reverse dependency is split in sub-expression. Then,
each sub-expression is checked to ensure that it does not contains the
unmet dependency. This removes the false-positive symbols and fixed symbol
which already have the correct dependency. Finally, only the symbol
responsible of the "select" is printed, instead of its full dependency tree.
CC: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This patch add more number consistency checkg, trying to catch the following
situation:
config FOO0
hex
default 42
config FOO1
string
config BAR0
int
default FOO1
config BAR1
hex
default FOO1
config FOO2
hex
default 42h
config FOO3
int
default "1bar"
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Replacing S_TRISTATE by S_BOOLEAN is a no-op for conf_write_symbol().
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: Fix unused variable warning in conf_write()]
Signed-off-by: Michal Marek <mmarek@suse.cz>
AUTOCONF_INCLUDED is not checked is not used within the tree and its parent
header, `autoconf.h', is safe to be re-included.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This option is aimed to add the possibility to control a menu's visibility
without adding dependency to the expression to all the submenu.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When expanding a parameterised string we may run out of space, this
triggers a realloc. When computing the new allocation size we do not
allow for the terminating '\0'. Allow for this when calculating the new
length.
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some menuconfigs in the Kconfig files have prompts and dependencies.
Currently, streamline_config misses these, and this can cause
streamline_config to keep modules enabled that should not be, and
even worse, not enable those that should.
This patch makes streamline_config process menuconfigs just like it
would process a config.
Reported-by: member graysky <graysky@archlinux.us>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I noticed that some Kconfig files have multi line dependencies
that continue with a backslash. Those dependencies on the next
line will be missed by streamline_config.
For example:
config CS89x0
tristate "CS89x0 support"
depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
|| ARCH_IXDP2X01 || MACH_MX31ADS)
The "|| ARCH_IXDP2X01 || MACH_MX31ADS)" will not be processed.
This patch adds code to handle this case.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On Fri, Aug 17, 2010 at 01:43PM +0800, Américo Wang wrote:
> Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
>
> BTW, I think we should add "use strict;" too.
Then I added "use strict;" to streamline_config.pl, I saw another
warning.
> Global symbol "$dir" requires explicit package name at
scripts/kconfig/streamline_config.pl line 286.
> Global symbol "$dir" requires explicit package name at
scripts/kconfig/streamline_config.pl line 287.
> Global symbol "$dir" requires explicit package name at
scripts/kconfig/streamline_config.pl line 288.
Then I added "my $dir;" to line 285.
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Toralf Foerster <toralf.foerster@gmx.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hiromu Yakura <hiromu1996@gmail.com>
LKML-Reference: <1282042158.7160.9.camel@hiromu-Macbook>
[ changed to just add my in front of $dir instead of new line ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When I added "use strict;" to streamline_config.pl, I saw the following
warnings:
> Global symbol "%prompt" requires explicit package name at
scripts/kconfig/streamline_config.pl line 183.
> Global symbol "%prompt" requires explicit package name at
scripts/kconfig/streamline_config.pl line 368.
The declaration of %prompt was incorrect, and should have been %prompts.
Cc: Toralf Foerster <toralf.foerster@gmx.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hiromu Yakura <hiromu1996@gmail.com>
LKML-Reference: <1281845597.11566.5.camel@camp10-laptop>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The commit 838a2e55e6
kbuild: migrate all arch to the kconfig mainmenu upgrade
Broke make localmodconfig. The reason was that it added a
environment variable to the kconfig source, which the
streamline_config.pl could not handle.
This patch changes streamline_config.pl to handle kconfig sources
using environment variables in their names.
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 861b4ea4 broke oldnoconfig when removed the oldnoconfig checks on
if (input_mode == nonint_oldconfig ||
input_mode == oldnoconfig) {
if (input_mode == nonint_oldconfig &&
sym->name &&
!sym_is_choice_value(sym)) {
to avoid oldnoconfig chugging through the else stanza.
Fix that to restore expected behaviour (which I've confirmed in the
Fedora kernel build that the configs end up looking the same.)
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
After fixing a use-after-free bug in kconfig, a 'make defconfig' or
'make allmodconfig' fills the screen with warnings that were not
detected before. Given that we are close to the release now, disable the
warnings temporarily and deal with them after 2.6.36.
Signed-off-by: Michal Marek <mmarek@suse.cz>
This prevents the buffers being overflowed when using a config
file with a long name. PATH_MAX is used elsewhere in the same
file, so use it here as well.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This fixes the use-after-free and associated crash in kconfig introduced
in commit 246cf9c26b.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 2e7a091 made struct file->name a const char*, but forgot to
constify all users of it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
commit 8baefd30b5 of linux-next replaced
a `switch()' statement with some `if()' statements, but left `break's
in the `switch()' statement untouched. This cause read config loop to
exit and so "make oldconfig" is not much usable (see below).
> $ make oldconfig
><snip>
> scripts/kconfig/conf --oldconfig Kconfig
> #
> # using defaults found in /boot/config-2.6.34-ccs-r1
> #
> *
> * Restart config...
> *
> *
> * General setup
> *
> Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW)
(I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But
that's not read here.)
This patch should fix this problem.
Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kbuild/kconfig/kbuild-generic-v7' of http://github.com/lacombar/linux-2.6:
kbuild: migrate all arch to the kconfig mainmenu upgrade
kconfig: expand file names
kconfig: use the file's name of sourced file
kconfig: constify file name
kconfig: don't emit warning upon rootmenu's prompt redefinition
kconfig: replace KERNELVERSION usage by the mainmenu's prompt
kconfig: delay gconf window initialization
kconfig: expand by default the rootmenu's prompt
kconfig: add a symbol string expansion helper
kconfig: regen parser
kconfig: implement the `mainmenu' directive
kconfig: allow PACKAGE to be defined on the compiler's command-line
kconfig: rephrase help texts/comments not to include the package name
kconfig: allow build-time definition of the internal config prefix
kconfig: rephrase help text not to mention the internal prefix
kconfig: replace a `switch()' statement by a more flexible `if()' statement
In 60f33b8 (kconfig: get rid of stray a.o, support ncursesw, 2006-01-15),
support to link menuconfig with ncursesw library was added. To compute
the linker command option -l, we check "libncursesw.{so,a,dylib}" to allow
ncursesw to be used as a replacement ncurses. However, when checking what
header file to include, we do not check /usr/include/ncursesw directory.
Add /usr/include/ncursesw to the list of directories that are checked.
With this patch, on my Debian Lenny box with libncursesw5-dev package but
not libncurses5-dev package, I can say "make menuconfig".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This will allow to use the following construct in source files:
config FOO
string
default "foo"
source "$FOO/Kconfig"
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
This silences the warning printed upon prompt redefinition for the rootmenu.
We will encounter this redefinition when a "mainmenu" statement is specified and
override the default prompt.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>