"val" is used as a divisor later, so we should check for zero here to
avoid a division by zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The values reported by the AD7780 are unsigned with a binary offset:
0x000000 is negative fullscale
0x800000 is zeroscale
0xffffff is positive fullscale
So mark the channel in the channel spec as unsigned rather than signed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The temperature channel reports values in degree Kelvin with sensitivity of 5630
codes per degree. If the chip is configured in bipolar mode there is an
additional binary offset of 0x800000 and the sensitivity is divided by two.
Currently the driver does the mapping from the raw value to degree Celsius when
doing a manual conversion. This has several disadvantages, the major one being
that it does not work for buffered mode, also by doing the division by the
sensitivity in the driver the precession of the reported value is needlessly
reduced.
Furthermore the current calculation only works in bipolar mode and the current
scale is of by a factor of 1000.
This patch modifies the driver to report correct offset and scale values in
both unipolar and bipolar mode and to report the raw temperature value
for manual conversions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In bipolar mode there is a a binary offset of 2**(N-1) (with N being the number
of bits) on the reported value. Currently this value is subtracted when doing a
manual read. While this works for manual channel readings it does not work for
buffered mode. So report the offset in the channels offset property, which will
work in both modes.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
The values reported by the AD7793 are unsigned.
In uniploar mode:
0x000000 is zeroscale
0xffffff is fullscale
In bipolar mode:
0x000000 is negative fullscale
0x800000 is zeroscale
0xffffff is positive fullscale
In bipolar mode there is a binary offset, but the values are still unsigned.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Write to the correct register when setting the ACX bit.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Without the break statement we fall right through to the default case and return
an error value.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The internal reference for the ad7793 and similar is 1.17V
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Make the "in-in_scale_available" attribute follow the new naming spec and
rename it to "in_voltage-voltage_scale_available".
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The temperature channel uses the internal 1.17V reference with 0.81 mv/C. The
reported temperature is in Kevlin, so we need to add the Kelvin to Celcius
offset when reporting the offset for the temperature channel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In bipolar mode there is a a binary offset of 2**(N-1) (with N being the number
of bits) on the reported value. Currently this value is subtracted when doing a
manual read. While this works for manual channel readings it does not work for
buffered mode. So report the offset in the channels offset property, which will
work in both modes.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The values reported by the AD7793 are unsigned.
In uniploar mode:
0x000000 is zeroscale
0xffffff is fullscale
In bipolar mode:
0x000000 is negative fullscale
0x800000 is zeroscale
0xffffff is positive fullscale
In bipolar mode there is a binary offset, but the values are still unsigned.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Without the break statement we fall right through to the default case and return
an error value.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
drivers/staging/iio/adc/ad7298_ring.c:97:37: warning: 'time_ns' may
be used uninitialized in this function [-Wmaybe-uninitialized]
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The data parameters for request_irq and free_irq have to match, otherwise the
IRQ wont be freed.
The issue has been discovered using the following coccinelle patch:
// <smpl>
@r1@
type T;
T data;
@@
(
request_irq(..., (void *)data)
|
request_irq(..., data)
|
request_threaded_irq(..., (void *)data)
|
request_threaded_irq(..., data)
)
@r2@
type r1.T;
T data;
position p;
@@
(
free_irq@p(..., (void *)data)
|
free_irq@p(..., data)
)
@depends on r1@
position p != r2.p;
@@
*free_irq@p(...)
// </smpl>
Cc: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The data parameters for request_irq and free_irq have to match, otherwise the
IRQ wont be freed.
The issue has been discovered using the following coccinelle patch:
// <smpl>
@r1@
type T;
T data;
@@
(
request_irq(..., (void *)data)
|
request_irq(..., data)
|
request_threaded_irq(..., (void *)data)
|
request_threaded_irq(..., data)
)
@r2@
type r1.T;
T data;
position p;
@@
(
free_irq@p(..., (void *)data)
|
free_irq@p(..., data)
)
@depends on r1@
position p != r2.p;
@@
*free_irq@p(...)
// </smpl>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In probe the I2C client data is set to the iio_dev struct in probe(), but
assumed to be the tsl2X7X_chip struct in remove(). Fix this by reading the
client data back as iio_dev as well.
The issue has been discovered using the following coccinelle patch:
// <smpl>
@r1@
type T;
T data;
expression dev;
@@
(
i2c_set_clientdata(dev, (void *)data)
|
i2c_set_clientdata(dev, data)
)
@r2@
type r1.T;
T data;
position p;
expression dev;
@@
data = i2c_get_clientdata@p(dev)
@depends on r1@
position p != r2.p;
expression dev;
identifier data;
@@
*data = i2c_get_clientdata@p(dev)
// </smpl>
Cc: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The SPI drvdata is set to adis16260_state struct in probe(), but assumed to be
the iio_dev struct in remove(). Fix this by setting it to the iio_dev in
probe().
The issue has been discovered using the following coccinelle patch:
// <smpl>
@r1@
type T;
T data;
expression dev;
@@
(
spi_set_drvdata(dev, (void *)data)
|
spi_set_drvdata(dev, data)
)
@r2@
type r1.T;
T data;
position p;
expression dev;
@@
data = spi_get_drvdata@p(dev)
@depends on r1@
position p != r2.p;
expression dev;
identifier data;
@@
*data = spi_get_drvdata@p(dev)
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=5L5b
-----END PGP SIGNATURE-----
Merge tag 'togreg-3.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO: One new driver and a couple of nice cleanups.
It is possible that on one of the error paths we are going to try to free
'rxbuf', even though it has not been allocated yet, which cause the following
warning:
drivers/staging/iio/adc/max1363_ring.c: In function 'max1363_trigger_handler':
drivers/staging/iio/adc/max1363_ring.c:87:7: warning: 'rxbuf' may be used
uninitialized in this function
Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Add iio channel type and modifiers for Correlated Color Temperature (CCT)
and RGBC (red/green/blue/clear) data.
Add CCT and RGBC descriptions to documentation.
Changes:
Revised/condensed RGBC descriptions.
Merge and trivial fix done by Jonathan Cameron.
Signed-off-by: Jon Brenner <jbrenner@taosinc.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Nothing terribly interesting in this one.
8 July 2012
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=ihIe
-----END PGP SIGNATURE-----
Merge tag 'togreg_8_7_2012' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Mixed back of updates and trivial examples fixes.
Nothing terribly interesting in this one.
8 July 2012
Only one of the channels of the ade7758 may be sampled at a time. Use the new
validate_scan_mask callback and the iio_validate_scan_mask_onehot function to
implement this restriction. Previously this was implemented using
available_scan_masks, but this requires a individual scan mask for each channel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Only one of the channels of the ad7793 may be sampled at a time. Use the new
validate_scan_mask callback and the iio_validate_scan_mask_onehot function to
implement this restriction. Previously this was implemented using
available_scan_masks, but this requires a individual scan mask for each channel.
Also the previous code was adding the scan index of the timestamp channel to
each available scan mask, this is not required though since the timestamp
channel is not restricted by the available scan masks and can be enabled or
disabled independently. So the new code does not have to take care of this.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Only one of the channels of the ad7192 may be sampled at a time. Use the new
validate_scan_mask callback and the iio_validate_scan_mask_onehot function to
implement this restriction. Previously this was implemented using
available_scan_masks, but this requires a individual scan mask for each channel.
Also the previous code was adding the scan index of the timestamp channel to
each available scan mask, this is not required though since the timestamp
channel is not restricted by the available scan masks and can be enabled or
disabled independently. So the new code does not have to take care of this.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The driver assumes that in 13bit mode the 16bit value has
to be shifted to the right by 3 bits. This is not true, in
both 16bit and 13bit mode the MSB is at the same position.
Currently the driver returns a temperature of 194 degrees
Celsius in 13bit mode and 24 degrees Celsius in 16bit mode.
Fix this by using the same algorithm for 16bit and 13bit
mode and by just masking out the lower three bits in 13bit
mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Otherwise a write to the resolution entry never returns.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests") threaded
IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise
the request will fail. This patch adds the IRQF_ONESHOT to IIO drivers where it
is missing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The adt7410 expects information about an irq in platform_data.
The driver can work without an irq, so make platform_data optional
by specifying a dummy platform_data if the device has none.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In 13bit mode the lower three bits of the adc value contain
flags. The driver does not use these flags at all, so make 16bit
mode the default.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
maybe iio_modifier_names and iio_chan_type_name_spec should be
exported from industrialio-core instead?
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reduces code and makes this channel available within the kernel.
Note that it is not added to the buffer, thus maintaining the
previous functionality of this driver.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
There is no reason for userspace to do this, so lets
drop this abi.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Peter Meerwald