The stop4 idle state on POWER9 is a deep idle state which loses
hypervisor resources, but whose latency is low enough that it can be
exposed via cpuidle.
Until now, the deep idle states which lose hypervisor resources (eg:
winkle) were only exposed via CPU-Hotplug. Hence currently on wakeup
from such states, barring a few SPRs which need to be restored to
their older value, rest of the SPRS are reinitialized to their values
corresponding to that at boot time.
When stop4 is used in the context of cpuidle, we want these additional
SPRs to be restored to their older value, to ensure that the context
on the CPU coming back from idle is same as it was before going idle.
In this patch, we define a SPR save area in PACA (since we have used
up the volatile register space in the stack) and on POWER9, we restore
SPRN_PID, SPRN_LDBAR, SPRN_FSCR, SPRN_HFSCR, SPRN_MMCRA, SPRN_MMCR1,
SPRN_MMCR2 to the values they had before entering stop.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The offset of hugepage block will not be 16G, if the expected
page is more than one. Calculate the totol size instead of the
hardcode value.
Fixes: 4792adbac9 ("powerpc: Don't use a 16G page if beyond mem= limits")
Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com>
Tested-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Although pretty much everyone using powernv is running little endian,
we should still test we can build for big endian. So add a
powernv_be_defconfig, which is autogenerated by flipping the endian
symbol in powernv_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Add support to register Thread In-Memory Collection PMU counters.
Patch adds thread IMC specific data structures, along with memory
init functions and CPU hotplug support.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add support to register Core In-Memory Collection PMU counters.
Patch adds core IMC specific data structures, along with memory
init functions and CPU hotplug support.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add support to register Nest In-Memory Collection PMU counters.
Patch adds a new device file called "imc-pmu.c" under powerpc/perf
folder to contain all the device PMU functions.
Device tree parser code added to parse the PMU events information
and create sysfs event attributes for the PMU.
Cpumask attribute added along with Cpu hotplug online/offline functions
specific for nest PMU. A new state "CPUHP_AP_PERF_POWERPC_NEST_IMC_ONLINE"
added for the cpu hotplug callbacks. Error handle path frees the memory
and unregisters the CPU hotplug callbacks.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Code to create platform device for the In-Memory Collection (IMC)
counters. Platform devices are created based on the IMC compatibility.
New header file created to contain the data structures and macros
needed for In-Memory Collection (IMC) counter pmu devices.
The device tree for IMC counters starts at the node "imc-counters".
This node contains all the IMC PMU nodes and event nodes for these IMC
PMUs. Device probe() parses the device to locate three possible IMC
device types (Nest/Core/Thread). Function then branch to parse each
unit nodes to populate vital information such as device memory sizes,
event nodes information, base address for reserve memory access (if
any) and so on. Simple bare-minimum shutdown function added which only
"stops" the engines.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Fix build with CONFIG_PERF_EVENTS=n]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In-Memory Collection (IMC) counters are performance monitoring
infrastructure. These counters need special sequence of SCOMs to
init/start/stop which is handled by OPAL. And OPAL provides three APIs
to init and control these IMC engines.
OPAL API documentation:
https://github.com/open-power/skiboot/blob/master/doc/opal-api/opal-imc-counters.rst
Patch updates the kernel side powernv platform code to support the new
OPAL APIs
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We can use pfn_to_page() in realmode for other configs. Hence remove the
CONFIG_FLATMEM ifdef.
Fixes: 8e0861fa3c ("powerpc: Prepare to support kernel handling of IOMMU map/unmap")
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Also fix up the #endif comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All cases initialise rv, and if they didn't that would be a bug. By
dropping the initialisation we give the compiler the chance to catch
those bugs for us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use memdup_user_nul() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
External IRQ0 (index 48) has the same capabilities as the other IRQ1-7
and is handled by the same register IPIC_SEPNR. When this register is
not specified for "ack" in "ipic_info", you cannot configure this IRQ
as IRQ_TYPE_EDGE_FALLING. This oversight was probably due to the
non-contiguous hwirq numbering of IRQ0 in the IPIC.
Signed-off-by: Jurgen Schindele <schindele@nentec.de>
[scottwood: Cleaned up commit message and posted as a proper patch]
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This allows building powerpc with the GENERIC_MSI_IRQ_DOMAIN
Kconfig by enabling the asm-generic msi.h in Kbuild. Without
this, there's a compilation error [1] because powerpc, as most
arches, doesn't provide an asm/msi.h.
[1] In file included from ./include/linux/kvm_host.h:20:0,
from ./arch/powerpc/include/asm/kvm_ppc.h:30,
from arch/powerpc/kernel/dbell.c:20:
./include/linux/msi.h:195:21: fatal error: asm/msi.h: No such file or directory
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Check for validity of cpu before calling get_hard_smp_processor_id().
Found with coverity.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
huge at all, a revert of a patch that turned out to break things, a fix
up for a new tty ioctl we added in 4.13-rc1 to get the uapi definition
correct, and a few minor serial driver fixes for reported issues.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWXMebA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn9MgCdGsIEQlTvTeG4QikxUPB7dkEJQacAoLWOKJzQ
A65mBAeOfiJztczi8uo4
=KEXp
-----END PGP SIGNATURE-----
Merge tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
huge at all, a revert of a patch that turned out to break things, a
fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
definition correct, and a few minor serial driver fixes for reported
issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix TIOCGPTPEER ioctl definition
tty: hide unused pty_get_peer function
tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
serial: imx: Prevent TX buffer PIO write when a DMA has been started
Revert "serial: imx-serial - move DMA buffer configuration to DT"
serial: sh-sci: Uninitialized variables in sysfs files
serial: st-asc: Potential error pointer dereference
A handful of fixes, mostly for new code.
Some reworking of the new STRICT_KERNEL_RWX support to make sure we also remove
executable permission from __init memory before it's freed.
A fix to some recent optimisations to the hypercall entry where we were
clobbering r12, this was breaking nested guests (PR KVM).
A fix for the recent patch to opal_configure_cores(). This could break booting
on bare metal Power8 boxes if the kernel was built without
CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.
And finally a workaround for spurious PMU interrupts on Power9 DD2.
Thanks to:
Nicholas Piggin, Anton Blanchard, Balbir Singh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Oy4/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A handful of fixes, mostly for new code:
- some reworking of the new STRICT_KERNEL_RWX support to make sure we
also remove executable permission from __init memory before it's
freed.
- a fix to some recent optimisations to the hypercall entry where we
were clobbering r12, this was breaking nested guests (PR KVM).
- a fix for the recent patch to opal_configure_cores(). This could
break booting on bare metal Power8 boxes if the kernel was built
without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.
- .. and finally a workaround for spurious PMU interrupts on Power9
DD2.
Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh"
* tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
powerpc/mm/hash: Refactor hash__mark_rodata_ro()
powerpc/mm/radix: Refactor radix__mark_rodata_ro()
powerpc/64s: Fix hypercall entry clobbering r12 input
powerpc/perf: Avoid spurious PMU interrupts after idle
powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()
Pull core fixes from Ingo Molnar:
"A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debug: Fix WARN_ON_ONCE() for modules
MAINTAINERS: Update the PTRACE entry
Mike Galbraith reported a situation where a WARN_ON_ONCE() call in DRM
code turned into an oops. As it turns out, WARN_ON_ONCE() seems to be
completely broken when called from a module.
The bug was introduced with the following commit:
19d436268d ("debug: Add _ONCE() logic to report_bug()")
That commit changed WARN_ON_ONCE() to move its 'once' logic into the bug
trap handler. It requires a writable bug table so that the BUGFLAG_DONE
bit can be written to the flags to indicate the first warning has
occurred.
The bug table was made writable for vmlinux, which relies on
vmlinux.lds.S and vmlinux.lds.h for laying out the sections. However,
it wasn't made writable for modules, which rely on the ELF section
header flags.
Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 19d436268d ("debug: Add _ONCE() logic to report_bug()")
Link: http://lkml.kernel.org/r/a53b04235a65478dd9afc51f5b329fdc65c84364.1500095401.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently even with STRICT_KERNEL_RWX we leave the __init text marked
executable after init, which is bad.
Add a hook to mark it NX (no-execute) before we free it, and implement
it for radix and hash.
Note that we use __init_end as the end address, not _einittext,
because overlaps_kernel_text() uses __init_end, because there are
additional executable sections other than .init.text between
__init_begin and __init_end.
Tested on radix and hash with:
0:mon> p $__init_begin
*** 400 exception occurred
Fixes: 1e0fc9d1eb ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the core logic into a helper, so we can use it for changing other
permissions.
We also change the logic to align start down, and end up. This means
calling the function with a range will expand that range to be at
least 1 mmu_linear_psize page in size. We need that so we can use it
on __init_begin ... __init_end which is not a full page in size.
This should always work for _stext/__init_begin, because we align
__init_begin to _stext + 16M in the linker script.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the core logic into a helper, so we can use it for changing permissions
other than _PAGE_WRITE.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A previous optimisation incorrectly assumed the PAPR hcall does
not use r12, and clobbers it upon entry. In fact it is used as
an input. This can result in KVM guests crashing (observed with
PR KVM).
Instead of using r12 to save r13, tihs patch saves r13 in ctr.
This is more costly, but not as slow as using the SPRG.
Fixes: acd7d8cef0 ("powerpc/64s: Optimize hypercall/syscall entry")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 DD2 can see spurious PMU interrupts after state-loss idle in
some conditions.
A solution is to save and reload MMCR0 over state-loss idle.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This ioctl does nothing to justify an _IOC_READ or _IOC_WRITE flag
because it doesn't copy anything from/to userspace to access the
argument.
Fixes: 54ebbfb160 ("tty: add TIOCGPTPEER ioctl")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Aleksa Sarai <asarai@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 1c0eaf0f56 ("powerpc/powernv: Tell OPAL about our MMU mode
on POWER9"), we added additional flags to the OPAL call to configure
CPUs at boot.
These flags only work on Power9 firmwares, and worse can cause boot
failures on Power8 machines, so we check for CPU_FTR_ARCH_300 (aka POWER9)
before adding the extra flags.
Unfortunately we forgot that opal_configure_cores() is called before
the CPU feature checks are dynamically patched, meaning the check
always returns true.
We definitely need to do something to make the CPU feature checks less
prone to bugs like this, but for now the minimal fix is to use
early_cpu_has_feature().
Reported-and-tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Fixes: 1c0eaf0f56 ("powerpc/powernv: Tell OPAL about our MMU mode on POWER9")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
Pull uacess-unaligned removal from Al Viro:
"That stuff had just one user, and an exotic one, at that - binfmt_flat
on arm and m68k"
* 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kill {__,}{get,put}_user_unaligned()
binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
Nothing that really stands out, just a bunch of fixes that have come in in the
last couple of weeks.
None of these are actually fixes for code that is new in 4.13. It's roughly half
older bugs, with fixes going to stable, and half fixes/updates for Power9.
Thanks to:
Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
Madhavan Srinivasan, Michael Neuling, Nicholas Piggin, Oliver O'Halloran.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6eIT
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Nothing that really stands out, just a bunch of fixes that have come
in in the last couple of weeks.
None of these are actually fixes for code that is new in 4.13. It's
roughly half older bugs, with fixes going to stable, and half
fixes/updates for Power9.
Thanks to: Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin
Herrenschmidt, Madhavan Srinivasan, Michael Neuling, Nicholas Piggin,
Oliver O'Halloran"
* tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Fix atomic64_inc_not_zero() to return an int
powerpc: Fix emulation of mfocrf in emulate_step()
powerpc: Fix emulation of mcrf in emulate_step()
powerpc/perf: Add POWER9 alternate PM_RUN_CYC and PM_RUN_INST_CMPL events
powerpc/perf: Fix SDAR_MODE value for continous sampling on Power9
powerpc/asm: Mark cr0 as clobbered in mftb()
powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9
powerpc/mm/radix: Synchronize updates to the process table
powerpc/mm/radix: Properly clear process table entry
powerpc/powernv: Tell OPAL about our MMU mode on POWER9
powerpc/kexec: Fix radix to hash kexec due to IAMR/AMOR
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator. This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always
ignored for smaller sizes. This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.
Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success. This will work independent of the order and overrides the
default allocator behavior. Page allocator users have several levels of
guarantee vs. cost options (take GFP_KERNEL as an example)
- GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
attempt to free memory at all. The most light weight mode which even
doesn't kick the background reclaim. Should be used carefully because
it might deplete the memory and the next user might hit the more
aggressive reclaim
- GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
allocation without any attempt to free memory from the current
context but can wake kswapd to reclaim memory if the zone is below
the low watermark. Can be used from either atomic contexts or when
the request is a performance optimization and there is another
fallback for a slow path.
- (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
non sleeping allocation with an expensive fallback so it can access
some portion of memory reserves. Usually used from interrupt/bh
context with an expensive slow path fallback.
- GFP_KERNEL - both background and direct reclaim are allowed and the
_default_ page allocator behavior is used. That means that !costly
allocation requests are basically nofail but there is no guarantee of
that behavior so failures have to be checked properly by callers
(e.g. OOM killer victim is allowed to fail currently).
- GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
and all allocation requests fail early rather than cause disruptive
reclaim (one round of reclaim in this implementation). The OOM killer
is not invoked.
- GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
behavior and all allocation requests try really hard. The request
will fail if the reclaim cannot make any progress. The OOM killer
won't be triggered.
- GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
and all allocation requests will loop endlessly until they succeed.
This might be really dangerous especially for larger orders.
Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic. No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.
This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.
[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When RLIMIT_STACK is, for example, 256MB, the current code results in a
gap between the top of the task and mmap_base of 256MB, failing to take
into account the amount by which the stack address was randomized. In
other words, the stack gets less than RLIMIT_STACK space.
Ensure that the gap between the stack and mmap_base always takes stack
randomization and the stack guard gap into account.
Inspired by Daniel Micay's linux-hardened tree.
Link: http://lkml.kernel.org/r/20170622200033.25714-4-riel@redhat.com
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Florian Weimer <fweimer@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds support for compiling with a rough equivalent to the glibc
_FORTIFY_SOURCE=1 feature, providing compile-time and runtime buffer
overflow checks for string.h functions when the compiler determines the
size of the source or destination buffer at compile-time. Unlike glibc,
it covers buffer reads in addition to writes.
GNU C __builtin_*_chk intrinsics are avoided because they would force a
much more complex implementation. They aren't designed to detect read
overflows and offer no real benefit when using an implementation based
on inline checks. Inline checks don't add up to much code size and
allow full use of the regular string intrinsics while avoiding the need
for a bunch of _chk functions and per-arch assembly to avoid wrapper
overhead.
This detects various overflows at compile-time in various drivers and
some non-x86 core kernel code. There will likely be issues caught in
regular use at runtime too.
Future improvements left out of initial implementation for simplicity,
as it's all quite optional and can be done incrementally:
* Some of the fortified string functions (strncpy, strcat), don't yet
place a limit on reads from the source based on __builtin_object_size of
the source buffer.
* Extending coverage to more string functions like strlcat.
* It should be possible to optionally use __builtin_object_size(x, 1) for
some functions (C strings) to detect intra-object overflows (like
glibc's _FORTIFY_SOURCE=2), but for now this takes the conservative
approach to avoid likely compatibility issues.
* The compile-time checks should be made available via a separate config
option which can be enabled by default (or always enabled) once enough
time has passed to get the issues it catches fixed.
Kees said:
"This is great to have. While it was out-of-tree code, it would have
blocked at least CVE-2016-3858 from being exploitable (improper size
argument to strlcpy()). I've sent a number of fixes for
out-of-bounds-reads that this detected upstream already"
[arnd@arndb.de: x86: fix fortified memcpy]
Link: http://lkml.kernel.org/r/20170627150047.660360-1-arnd@arndb.de
[keescook@chromium.org: avoid panic() in favor of BUG()]
Link: http://lkml.kernel.org/r/20170626235122.GA25261@beast
[keescook@chromium.org: move from -mm, add ARCH_HAS_FORTIFY_SOURCE, tweak Kconfig help]
Link: http://lkml.kernel.org/r/20170526095404.20439-1-danielmicay@gmail.com
Link: http://lkml.kernel.org/r/1497903987-21002-8-git-send-email-keescook@chromium.org
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Testing the fortified string functions[1] would cause a kernel panic on
boot in test_feature_fixups() due to a buffer overflow in memcmp.
This boils down to things like this:
extern unsigned int ftr_fixup_test1;
extern unsigned int ftr_fixup_test1_orig;
check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
We know that these are asm labels so it is safe to read up to 'size'
bytes at those addresses.
However, because we have passed the address of a single unsigned int to
memcmp, the compiler believes the underlying object is in fact a single
unsigned int. So if size > sizeof(unsigned int), there will be a panic
at runtime.
We can fix this by changing the types: instead of calling the asm labels
unsigned ints, call them unsigned int[]s. Therefore the size isn't
incorrectly determined at compile time and we get a regular unsafe
memcmp and no panic.
[1] http://openwall.com/lists/kernel-hardening/2017/05/09/2
Link: http://lkml.kernel.org/r/1497903987-21002-7-git-send-email-keescook@chromium.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
prom_init is a bit special; in theory it should be able to be linked
separately to the kernel. To keep this from getting too complex, the
symbols that prom_init.c uses are checked.
Fortification adds symbols, and it gets quite messy as it includes
things like panic(). So just don't fortify prom_init.c for now.
Link: http://lkml.kernel.org/r/1497903987-21002-6-git-send-email-keescook@chromium.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement an arch-speicfic watchdog rather than use the perf-based
hardlockup detector.
The new watchdog takes the soft-NMI directly, rather than going through
perf. Perf interrupts are to be made maskable in future, so that would
prevent the perf detector from working in those regions.
Additionally, implement a SMP based detector where all CPUs watch one
another by pinging a shared cpumask. This is because powerpc Book3S
does not have a true periodic local NMI, but some platforms do implement
a true NMI IPI.
If a CPU is stuck with interrupts hard disabled, the soft-NMI watchdog
does not work, but the SMP watchdog will. Even on platforms without a
true NMI IPI to get a good trace from the stuck CPU, other CPUs will
notice the lockup sufficiently to report it and panic.
[npiggin@gmail.com: honor watchdog disable at boot/hotplug]
Link: http://lkml.kernel.org/r/20170621001346.5bb337c9@roar.ozlabs.ibm.com
[npiggin@gmail.com: fix false positive warning at CPU unplug]
Link: http://lkml.kernel.org/r/20170630080740.20766-1-npiggin@gmail.com
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170616065715.18390-6-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Tested-by: Babu Moger <babu.moger@oracle.com> [sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split
HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR.
LOCKUP_DETECTOR implies the general boot, sysctl, and programming
interfaces for the lockup detectors.
An architecture that wants to use a hard lockup detector must define
HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH.
Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the
minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and
does not implement the LOCKUP_DETECTOR interfaces.
sparc is unusual in that it has started to implement some of the
interfaces, but not fully yet. It should probably be converted to a full
HAVE_HARDLOCKUP_DETECTOR_ARCH.
[npiggin@gmail.com: fix]
Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com
Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com> [sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vmcoreinfo_max_size stands for the vmcoreinfo_data, the correct one we
should use is vmcoreinfo_note whose total size is VMCOREINFO_NOTE_SIZE.
Like explained in commit 77019967f0 ("kdump: fix exported size of
vmcoreinfo note"), it should not affect the actual function, but we
better fix it, also this change should be safe and backward compatible.
After this, we can get rid of variable vmcoreinfo_max_size, let's use
the corresponding macros directly, fewer variables means more safety for
vmcoreinfo operation.
[xlpang@redhat.com: fix build warning]
Link: http://lkml.kernel.org/r/1494830606-27736-1-git-send-email-xlpang@redhat.com
Link: http://lkml.kernel.org/r/1493281021-20737-2-git-send-email-xlpang@redhat.com
Signed-off-by: Xunlei Pang <xlpang@redhat.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although it's not documented anywhere, there is an expectation that
atomic64_inc_not_zero() returns a result which fits in an int. This is
the behaviour implemented on all arches except powerpc.
This has caused at least one bug in practice, in the percpu-refcount
code, where the long result from our atomic64_inc_not_zero() was
truncated to an int leading to lost references and stuck systems. That
was worked around in that code in commit 966d2b04e0 ("percpu-refcount:
fix reference leak during percpu-atomic transition").
To the best of my grepping abilities there are no other callers
in-tree which truncate the value, but we should fix it anyway. Because
the breakage is subtle and potentially very harmful I'm also tagging
it for stable.
Code generation is largely unaffected because in most cases the
callers are just using the result for a test anyway. In particular the
case of fget() that was mentioned in commit a6cf7ed511
("powerpc/atomic: Implement atomic*_inc_not_zero") generates exactly
the same code.
Fixes: a6cf7ed511 ("powerpc/atomic: Implement atomic*_inc_not_zero")
Cc: stable@vger.kernel.org # v3.4
Noticed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
From POWER4 onwards, mfocrf() only places the specified CR field into
the destination GPR, and the rest of it is set to 0. The PowerPC AS
from version 3.0 now requires this behaviour.
The emulation code currently puts the entire CR into the destination GPR.
Fix it.
Fixes: 6888199f7f ("[POWERPC] Emulate more instructions in software")
Cc: stable@vger.kernel.org # v2.6.22+
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The mcrf emulation code was using the CR field number directly as the shift
value, without taking into account that CR fields are numbered from 0-7 starting
at the high bits. That meant it was looking at the CR fields in the reverse
order.
Fixes: cf87c3f6b6 ("powerpc: Emulate icbi, mcrf and conditional-trap instructions")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Similar to POWER8, POWER9 can count run cycles and run instructions
completed on more than one PMU.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In case of continous sampling (non-marked), the code currently
sets MMCRA[SDAR_MODE] to 0b01 (Update on TLB miss) for Power9 DD1.
On DD2 and later it copies the sdar_mode value from the event code,
which for most events is 0b00 (No updates).
However we must set a non-zero value for SDAR_MODE when doing
continuous sampling, so honor the event code, unless it's zero, in
which case we use use 0b01 (Update on TLB miss).
Fixes: 78b4416aa2 ("powerpc/perf: Handle sdar_mode for marked event in power9")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Implement the show_options superblock op for spufs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeremy Kerr <jk@ozlabs.org>
cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The workaround for the CELL timebase bug does not correctly mark cr0 as
being clobbered. This means GCC doesn't know that the asm block changes cr0 and
might leave the result of an unrelated comparison in cr0 across the block, which
we then trash, leading to basically random behaviour.
Fixes: 859deea949 ("[POWERPC] Cell timebase bug workaround")
Cc: stable@vger.kernel.org # v2.6.19+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log and flag for stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are two cases outside the normal address space management
where a CPU's local TLB is to be flushed:
1. Host boot; in case something has left stale entries in the
TLB (e.g., kexec).
2. Machine check; to clean corrupted TLB entries.
CPU state restore from deep idle states also flushes the TLB.
However this seems to be a side effect of reusing the boot code to set
CPU state, rather than a requirement itself.
The current flushing has a number of problems with ISA v3.0B:
- The current radix mode of the MMU is not taken into account. tlbiel
is undefined if the R field does not match the current radix mode.
- ISA v3.0B hash must flush the partition and process table caches.
- ISA v3.0B radix must flush partition and process scoped translations,
partition and process table caches, and also the page walk cache.
Add POWER9 cases to handle these, with radix vs hash determined by the
host MMU mode.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers. On 32-bit use 4MB, which is the
traditional x86 minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).
Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When writing to the process table, we need to ensure the store is
visible to a subsequent access by the MMU. We assume we never have
the PID active while doing the update, so a ptesync/isync pair
should hopefully be a big enough hammer for our purpose.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On radix, the process table entry we want to clear when destroying a
context is entry 0, not entry 1. This has no *immediate* consequence
on Power9, but it can cause other bugs to become worse.
Fixes: 7e381c0ff6 ("powerpc/mm/radix: Add mmu context handling callback for radix")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
That will allow OPAL to configure the CPU in an optimal way.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes a crash seen while doing a kexec from radix mode to
hash mode. Key 0 is special in hash and used in the RPN by default, we
set the key values to 0 today. In radix mode key 0 is used to control
supervisor<->user access. In hash key 0 is used by default, so the
first instruction after the switch causes a crash on kexec.
Commit 3b10d0095a ("powerpc/mm/radix: Prevent kernel execution of
user space") introduced the setting of IAMR and AMOR values to prevent
execution of user mode instructions from supervisor mode. We need to
clean up these SPR's on kexec.
Fixes: 3b10d0095a ("powerpc/mm/radix: Prevent kernel execution of user space")
Cc: stable@vger.kernel.org # v4.10+
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gautham R. Shenoy