Commit Graph

400155 Commits

Author SHA1 Message Date
Ingo Molnar 8a3da6c7d0 perf/x86: Fix PMU detection printout when no PMU is detected
Ran into this cryptic PMU bootup log recently:

[    0.124047] Performance Events:
[    0.125000] smpboot: ...

Turns out we print this if no PMU is detected. Fall back to
the right condition so that the following is printed:

[    0.122381] Performance Events: no PMU driver, software events only.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-u2fwaUffakjp0qkpRfqljgsn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-28 15:48:48 +02:00
Joerg Roedel c55d1c41df drm/msm: Remove iommu include from mdp4_kms.c
The include file has been removed and the file does not
need it anyway, so remove it. Fixes a compile error.

Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-09-28 09:17:31 -04:00
Thomas Meyer e4826a94c7 drm/msm: Odd PTR_ERR usage
The variable priv->kms is not initialized yet.

Found by "scripts/coccinelle/tests/odd_ptr_err.cocci".
PTR_ERR should access the value just tested by IS_ERR.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
2013-09-28 08:53:26 -04:00
Heiko Carstens efc1d23b3d s390: enable ARCH_USE_CMPXCHG_LOCKREF
Enable ARCH_USE_CMPXCHG_LOCKREF since it shows performance improvements
with Linus' simple stat() test case of up to 50% on a 30 cpu system.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-09-28 12:46:29 +02:00
Heiko Carstens 491f6f8e5f lockref: use arch_mutex_cpu_relax() in CMPXCHG_LOOP()
Make use of arch_mutex_cpu_relax() so architectures can override the
default cpu_relax() semantics.
This is especially useful for s390, where cpu_relax() means that we
yield() the current (virtual) cpu and therefore is very expensive,
and would contradict the whole purpose of the lockless cmpxchg loop.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-09-28 12:46:24 +02:00
Heiko Carstens 083986e824 mutex: replace CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX with simple ifdef
Linus suggested to replace

 #ifndef CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX
 #define arch_mutex_cpu_relax() cpu_relax()
 #endif

with just a simple

  #ifndef arch_mutex_cpu_relax
  # define arch_mutex_cpu_relax() cpu_relax()
  #endif

to get rid of CONFIG_HAVE_CPU_RELAX_SIMPLE. So architectures can
simply define arch_mutex_cpu_relax if they want an architecture
specific function instead of having to add a select statement in
their Kconfig in addition.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-09-28 12:46:21 +02:00
Ingo Molnar 62d08aec6a Merge branch 'context_tracking/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into sched/urgent
Pull context tracking ARM fix from Frederic Weisbecker.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-28 08:50:09 +02:00
Dave Airlie 41ed7fe92f Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
More radeon fixes for 3.12.  Kind of all over the place: UVD, DPM,
tiling, etc.

* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix hdmi audio on DCE3.0/3.1 asics
  drm/radeon/cik: fix overflow in vram fetch
  drm/radeon: add missing hdmi callbacks for rv6xx
  drm/radeon/uvd: lower msg&fb buffer requirements on UVD3
  drm/radeon: disable tests/benchmarks if accel is disabled
  drm/radeon: don't set default clocks for SI when DPM is disabled
  drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables
  drm/radeon/dpm: fetch the max clk from voltage dep tables helper
  drm/radeon: fix missed variable sized access
  drm/radeon: Make r100_cp_ring_info() and radeon_ring_gfx() safe (v2)
  drm/radeon/cik: Add tiling mode index for 1D tiled depth/stencil surfaces
  drm/radeon/cik: Fix encoding of number of banks in tiling configuration info
  drm/radeon/cik: Fix printing of client name on VM protection fault
  drm/radeon: additional gcc fixes for radeon_atombios.c
  drm/radeon: avoid UVD corruption on AGP cards using GPU gart
2013-09-28 14:45:30 +10:00
Dave Airlie 36dec40ceb Merge tag 'drm-intel-fixes-2013-09-26' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Just a few fixes for regressions and other serious stuff.

Two fix state tracking mismatches, together with an additional patch that
I've submitted to stable (somehow forgotten to tag it) we should have them
fixed now (I hope).

* tag 'drm-intel-fixes-2013-09-26' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix up usage of SHRINK_STOP
  drm/i915: preserve pipe A quirk in i9xx_set_pipeconf
  drm/i915/tv: clear adjusted_mode.flags
  drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER
  drm/i915: Use a temporary va_list for two-pass string handling
2013-09-28 08:46:44 +10:00
Linus Torvalds 6cac446bd3 Fix potential crash condition in applesmc driver
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSRFZjAAoJEMsfJm/On5mBF3oP/2RQ5I2gDzE8BUBsjqjnyJVM
 8dlBhdTmy7K19Rmu1cJAtKqIpBsaMW9r4Z1CYxC/3w0Q9H0lxbn61qxwNmow2iFo
 nn4hNWmm+QD97TTYTeKOFQLNsKNDddBrzy9vk1yODRL9hUcPG9tsYT5xfRKWMK2D
 G5g03vShF4yLiMcrjbhXd+HEbsVBeVydhUdH96ggRzcGLaFOdB1of4sM96in+3KM
 ECMqiS2Dmzyb/eP0SQTuzRd3xJqg0t/MUtP41zrrw0M7Dx5BawfdwCLb16qxR/Cq
 cSxRnifF//mZqapW8m8KDDyMRpX2Y53nZET+2nGOxR5FJh9MROOLKQ3C7knpldxi
 lw94SP5ZTD0q3uben0TSk3JaKuPwIvk5w+r4HcBNsgVLish1lFEt15w0I9CnzBcL
 ORD2hRYUk8fvmGFEmxwppOH5EF+vyGVs6y4yYutL0G+AO+3nyGjLZE3jce9eqvQS
 pu64HBDLa8fEYl5niJpiMC0EbgPWeTf6j7LwRCufmBhECnmX2SO0wTGuNlcFC8/O
 XdLje5uBjGQ1Cw4GItb+QwY4Zr9W9X7CNIzBnNqdMC0AM2fKAVLfK0g8AcMRQm8q
 jmwsBB99VrSgP67vPaj8o9H0ApHfh4JoCD9HrJl5XzNsNUp/goZdthTjIFc7+ygx
 pij5e9IJUzMwqI1W3jcD
 =/G2c
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix potential crash condition in applesmc driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (applesmc) Check key count before proceeding
2013-09-27 10:07:47 -07:00
Linus Torvalds a7301fcc12 sound fixes for 3.12-rc3
Nothing too serious here: a couple of compress-offload core fixes,
 Haswell HDMI audio fix, a fixup for new MacBook Airs and a few COEF
 setups for ALC283 mic problems.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSRXXaAAoJEGwxgFQ9KSmkpnEP/0yNW2kXvDTtDJ4ctu9b8MOK
 GGcmJdadTXWpEalRz9Ya2iCuhCI9etZ5HpjradtYtr2ZfYwtY3iYdqoZLHY4HdRm
 Ib8WU4fM0/xV839nGrEzojwBEulRVbs8BXw+VE7d9kgAHvrL69d0Uv243ZBV3mcU
 6hNEVby0EFoA4jN2ATJ2ZTpHg9PT+Duy9hL7nBW0pdQL5TlYSdlLKq2Xs6xZ6+Os
 rzT1zXUmw5aovQbtSsGKhzFvjUKF4JenR9b8KzSepppVL5YUxgEgFMgRGCfTDSD8
 XSf4w+QoJFIuOXPQu0Kuylny3n+2EA6tffAEkOgPs93x5TgZN9KqTMTuWfA4qRm9
 nS6MU0uc5IOrQY84XoWxilGJUo3LL2xyk8BqLPDVp4m+JTfqZk3yWFX2EO4P8UCB
 wp4DoBbG429dIC5TTDTpfDghd8pEK7V4zqq4V5bz1LdYLJ8k+YmKcE1x5S0O6Ims
 QgZFJCgmx95yiOlIi/K5t6TngCGwSruEZIm+jbrRxXKBde1zm4/16ULUfLRAn6f+
 b5eX3bcPVyJL7tXMNHlTYAbOdT9vREegCcMIk4nrbXypZaO3vwsYo4GlWTBRHdsE
 U+4Z3sc4C9fZwQIJaaJGXWA6i/CULyCcB6a+h741fkWDCiinTQdKLJxZc8D27Q89
 dNah0gnJ/rLyTT6SY1nV
 =bi3p
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Nothing too serious here: a couple of compress-offload core fixes,
  Haswell HDMI audio fix, a fixup for new MacBook Airs and a few COEF
  setups for ALC283 mic problems"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Enable internal mic on a Thinkpad machine with ALC283
  ALSA: hda - Fix Internal Mic boost can't control with ALC283
  ALSA: hda - Add documentation for CS4208 fixups
  ALSA: hda - Add fixup for MacBook Air 6,1 and 6,2 with CS4208 codec
  ALSA : hda - not use assigned converters for all unused pins
  ALSA: compress: Make sure we trigger STOP before closing the stream.
  ALSA: compress: Fix compress device unregister.
2013-09-27 09:33:01 -07:00
Linus Torvalds d3aa02695b Small fbdev fixes for various fb drivers
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSRUnwAAoJEPo9qoy8lh71kCQP/2UySAFblZO/dI2r+qYaeKXu
 bWM95nUcFnGdSEz2TqsV2bPjoUl3WihHilwVYrMNhbah1XeCZtZOkWEdF0k2uIM/
 KZ2A5baWbx+QX7UuYJ4dHRpnVI5O93uF1V6o9AwJ+1IqExWq+ubER8cYL9oduXog
 B2bJqU1uBz8uqtKcrd4JdXP5nMioEKS6f7npuaDTv/nPixKK6f6EqSXpAzsseOdd
 TiUqe0cjWehDxLjRHGh4CysHD79To01/zEOH0/hChIpiB8TXHJvKxROfDNxNLaLk
 w2MYRA0IoDQhul9cyQPTRCI3V4HVwBbOW7x/KwiVuCMbdqHG8kFWmOZVE2Ojbz90
 nb9DhHDgOWuUnvEC7N0Ns9cdoyTD/ZmnqgUVdbEK9Xkw5FFEWYdFwd3y9ie6zFwp
 syN+tJMC7KLBOJYyux6gC3EYYzUcu+UVkpUQ5tdFZ2LgkUUKpkWtnAaxW5zOMyTi
 R6/sBo2I90cQ2reXTaZQv8y7NtZzE5V3x/aLk5at0k1wMkCLJvzEBJkHWLAQFxt4
 qKqr7l3gmQIkleWHNkt+0s9egBBnyXoiEIoP4FmHHHP5KEwB6vJZqIy5Ej2/o0Yz
 KEMt4GWtOqKozKOTFewrDDTjTJmkcPl4DyRa7bUyNbTVL5hQ42SiMMprM2IHUNKI
 bQNzhNsxhVE8TQ2ZheTI
 =Z6EB
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-fixes-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev fixes from Tomi Valkeinen:
 "Small fbdev fixes for various fb drivers"

* tag 'fbdev-fixes-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: mxsfb: Add missing break
  video: of: display_timing: correct display-timings node finding
  neofb: fix error return code in neofb_probe()
  s3fb: fix error return code in s3_pci_probe()
  video: mmp: drop needless devm cleanup
  OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier
  OMAPDSS: DISPC: set irq_safe for runtime PM
  OMAPDSS: Return right error during connector probe
2013-09-27 09:32:09 -07:00
Linus Torvalds e1f8826f51 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull reiserfs and UDF fixes from Jan Kara:
 "The contains fix of an UDF oops when mounting corrupted media and a
  fix of a race in reiserfs leading to oops"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: fix race with flush_used_journal_lists and flush_journal_list
  reiserfs: remove useless flush_old_journal_lists
  udf: Fortify LVID loading
2013-09-27 09:31:09 -07:00
Eric W. Biederman 730d7d3398 sysfs: Allow mounting without CONFIG_NET
In kobj_ns_current_may_mount the default should be to allow the mount.
The test is only for a single kobj_ns_type at a time, and unless there
is a reason to prevent it the mounting sysfs should be allowed.
Subsystems that are not registered can't have are not involved so can't
have a reason to prevent mounting sysfs.

This is a bug-fix to commit 7dc5dbc879 ("sysfs: Restrict mounting
sysfs") that came in via the userns tree during the 3.12 merge window.

Reported-and-tested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-27 09:18:39 -07:00
Will Deacon d2212b4dce lockref: allow relaxed cmpxchg64 variant for lockless updates
The 64-bit cmpxchg operation on the lockref is ordered by virtue of
hazarding between the cmpxchg operation and the reference count
manipulation. On weakly ordered memory architectures (such as ARM), it
can be of great benefit to omit the barrier instructions where they are
not needed.

This patch moves the lockless lockref code over to a cmpxchg64_relaxed
operation, which doesn't provide barrier semantics. If the operation
isn't defined, we simply #define it as the usual 64-bit cmpxchg macro.

Cc: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-27 09:15:01 -07:00
Chew, Chiau Ee bd63ace4dc i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE is set
According to Designware I2C spec, if I2C_DYNAMIC_TAR_UPDATE is set to 1,
the 10-bit addressing mode is controlled by IC_10BITADDR_MASTER bit of
IC_TAR register instead of IC_CON register. The IC_10BITADDR_MASTER
in IC_CON register becomes read-only copy. Since I2C_DYNAMIC_TAR_UPDATE
value can't be detected from hardware register, so we will always set the
IC_10BITADDR_MASTER bit in both IC_CON and IC_TAR register whenever 10-bit
addresing mode is requested by user application.

Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27 18:12:31 +02:00
Thierry Reding 85b3a9356e i2c: mv64xxx: Do not use writel_relaxed()
The driver is used on PowerPC which don't provide writel_relaxed(). This
breaks the c2k and prpmc2800 default configurations. To fix the build,
turn the calls to writel_relaxed() into writel(). The impacts for ARM
should be minimal.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27 18:12:30 +02:00
Thierry Reding c1a9946780 i2c: mv64xxx: Fix some build warnings
Some functions and variables are only used if the configuration selects
HAVE_CLK. Protect them with a corresponding #ifdef CONFIG_HAVE_CLK block
to avoid compiler warnings.

Signed-off-by: Thierry Reding <treding@nvidia.com>
[wsa: added marker to #endif]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27 18:12:30 +02:00
Kim Phillips 153369139a i2c: s3c2410: fix clk_disable/clk_unprepare WARNings
commit d16933b339 "i2c: s3c2410: Move
location of clk_prepare_enable() call in probe function" refactored
clk_enable and clk_disable calls yet neglected to remove the
clk_disable_unprepare call in the module's remove().

It helps remove warnings on an arndale during unbind:

echo 12c90000.i2c > /sys/bus/platform/devices/12c90000.i2c/driver/unbind

------------[ cut here ]------------
WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:842 clk_disable+0x18/0x24()
Modules linked in:
CPU: 0 PID: 2548 Comm: bash Not tainted 3.11.0-next-20130916-00003-gf4bddbc #6
[<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac)
[<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88)
[<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24)
[<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c4a64>] (clk_disable+0x18/0x24)
[<c02c4a64>] (clk_disable+0x18/0x24) from [<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70)
[<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c)
[<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4)
[<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28)
[<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90)
[<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c)
[<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198)
[<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194)
[<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70)
[<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30)
---[ end trace 4c9f9403066f57a6 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:751 clk_unprepare+0x14/0x1c()
Modules linked in:
CPU: 0 PID: 2548 Comm: bash Tainted: G        W    3.11.0-next-20130916-00003-gf4bddbc #6
[<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14)
[<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac)
[<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88)
[<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24)
[<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c5834>] (clk_unprepare+0x14/0x1c)
[<c02c5834>] (clk_unprepare+0x14/0x1c) from [<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70)
[<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c)
[<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4)
[<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28)
[<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90)
[<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c)
[<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198)
[<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194)
[<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70)
[<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30)
---[ end trace 4c9f9403066f57a7 ]---

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-27 18:12:09 +02:00
Frederic Weisbecker 0c06a5d4b1 arm: Fix build error with context tracking calls
ad65782fba (context_tracking: Optimize main APIs off case
with static key) converted context tracking main APIs to inline
function and left ARM asm callers behind.

This can be easily fixed by making ARM calling the post static
keys context tracking function. We just need to replicate the
static key checks there. We'll remove these later when ARM will
support the context tracking static keys.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Anil Kumar <anilk4.v@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kevin Hilman <khilman@linaro.org>
2013-09-27 17:59:47 +02:00
Kailang Yang 1bb3e062d4 ALSA: hda - Enable internal mic on a Thinkpad machine with ALC283
More thorough testing showed that these verbs were necessary to
improve quality of the internal mic. Patch originally from Realtek.

BugLink: https://bugs.launchpad.net/bugs/1231931
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27 14:10:52 +02:00
Kailang Yang 068fd3a081 ALSA: hda - Fix Internal Mic boost can't control with ALC283
ALC283 pin control for Line1 default control by hidden register.
Use line1 as internal Mic will not get sound when boost value up.
Set control by verb for hidden register will solve this issue.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27 14:04:05 +02:00
Takashi Iwai a0760527f5 ALSA: hda - Add documentation for CS4208 fixups
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27 10:19:31 +02:00
Ben Whitten b5bf0a929d ALSA: hda - Add fixup for MacBook Air 6,1 and 6,2 with CS4208 codec
This patch adds the default pin configuration and some init verbs for
setting COEFs, in addition to the correction of input pin AMP caps
for MacBook Air 6,1 and 6,2.  With these changes, the headphone jack
detection starts working properly.

[trivial space fixes by tiwai]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60811
Signed-off-by: Ben Whitten <benwhitten@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-27 10:17:44 +02:00
Suravee Suthikulpanit accd1e823e x86/microcode/AMD: Fix patch level reporting for family 15h
On AMD family 14h, applying microcode patch on the a core (core0)
would also affect the other core (core1) in the same compute
unit. The driver would skip applying the patch on core1, but it
still need to update kernel structures to reflect the proper
patch level.

The current logic is not updating the struct
ucode_cpu_info.cpu_sig.rev of the skipped core. This causes the
/sys/devices/system/cpu/cpu1/microcode/version to report
incorrect patch level as shown below:

  $ grep . cpu?/microcode/version
  cpu0/microcode/version:0x600063d
  cpu1/microcode/version:0x6000626
  cpu2/microcode/version:0x600063d
  cpu3/microcode/version:0x6000626
  cpu4/microcode/version:0x600063d

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: <bp@alien8.de>
Cc: <jacob.w.shin@gmail.com>
Cc: <herrmann.der.user@googlemail.com>
Link: http://lkml.kernel.org/r/1285806432-1995-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-27 09:29:27 +02:00
Rafael J. Wysocki dcc7bc3f3d Merge branch 'pm-cpufreq-fixes'
* pm-cpufreq-fixes:
  cpufreq: exynos5440: Fix potential NULL pointer dereference
  cpufreq: check cpufreq driver is valid and cpufreq isn't disabled in cpufreq_get()
  acpi-cpufreq: skip loading acpi_cpufreq after intel_pstate
2013-09-27 02:45:36 +02:00
Rafael J. Wysocki d93faa4885 Merge branch 'acpi-fixes'
* acpi-fixes:
  ACPI / scan: fix typo in comments of acpi_bus_unregister_driver()
  ACPI / IPMI: Fix atomic context requirement of ipmi_msg_handler()
2013-09-27 02:45:10 +02:00
Larry Finger df3f4edc6c staging: r8188eu: Add new device ID
The DLink DWA-125 Rev D1 also uses this driver.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Tested-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 16:44:45 -07:00
David Cohen 85601f8cf6 usb: dwc3: add support for Merrifield
Add PCI id for Intel Merrifield

Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 16:22:29 -07:00
Shengzhou Liu eee41b49b8 USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
In case of usb phy reinitialization:
e.g. insmod usb-module(usb works well) -> rmmod usb-module -> insmod usb-module
It found the PHY_CLK_VALID bit didn't work if it's not with the power-on reset.
So we just check PHY_CLK_VALID bit during the stage with POR, this can be met
by the tricky of checking FSL_SOC_USB_PRICTRL register.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 16:22:29 -07:00
Al Viro 2606b28aab USB: Fix breakage in ffs_fs_mount()
There's a bunch of failure exits in ffs_fs_mount() with
seriously broken recovery logics.  Most of that appears to stem
from misunderstanding of the ->kill_sb() semantics; unlike
->put_super() it is called for *all* superblocks of given type,
no matter how (in)complete the setup had been.  ->put_super()
is called only if ->s_root is not NULL; any failure prior to
setting ->s_root will have the call of ->put_super() skipped.
->kill_sb(), OTOH, awaits every superblock that has come from
sget().

Current behaviour of ffs_fs_mount():

We have struct ffs_sb_fill_data data on stack there.  We do
	ffs_dev = functionfs_acquire_dev_callback(dev_name);
and store that in data.private_data.  Then we call mount_nodev(),
passing it ffs_sb_fill() as a callback.  That will either fail
outright, or manage to call ffs_sb_fill().  There we allocate an
instance of struct ffs_data, slap the value of ffs_dev (picked
from data.private_data) into ffs->private_data and overwrite
data.private_data by storing ffs into an overlapping member
(data.ffs_data).  Then we store ffs into sb->s_fs_info and attempt
to set the rest of the things up (root inode, root dentry, then
create /ep0 there).  Any of those might fail.  Should that
happen, we get ffs_fs_kill_sb() called before mount_nodev()
returns.  If mount_nodev() fails for any reason whatsoever,
we proceed to
	functionfs_release_dev_callback(data.ffs_data);

That's broken in a lot of ways.  Suppose the thing has failed in
allocation of e.g. root inode or dentry.  We have
	functionfs_release_dev_callback(ffs);
	ffs_data_put(ffs);
done by ffs_fs_kill_sb() (ffs accessed via sb->s_fs_info), followed by
	functionfs_release_dev_callback(ffs);
from ffs_fs_mount() (via data.ffs_data).  Note that the second
functionfs_release_dev_callback() has every chance to be done to freed memory.

Suppose we fail *before* root inode allocation.  What happens then?
ffs_fs_kill_sb() doesn't do anything to ffs (it's either not called at all,
or it doesn't have a pointer to ffs stored in sb->s_fs_info).  And
	functionfs_release_dev_callback(data.ffs_data);
is called by ffs_fs_mount(), but here we are in nasal daemon country - we
are reading from a member of union we'd never stored into.  In practice,
we'll get what we used to store into the overlapping field, i.e. ffs_dev.
And then we get screwed, since we treat it (struct gfs_ffs_obj * in
disguise, returned by functionfs_acquire_dev_callback()) as struct
ffs_data *, pick what would've been ffs_data ->private_data from it
(*well* past the actual end of the struct gfs_ffs_obj - struct ffs_data
is much bigger) and poke in whatever it points to.

FWIW, there's a minor leak on top of all that in case if ffs_sb_fill()
fails on kstrdup() - ffs is obviously forgotten.

The thing is, there is no point in playing all those games with union.
Just allocate and initialize ffs_data *before* calling mount_nodev() and
pass a pointer to it via data.ffs_data.  And once it's stored in
sb->s_fs_info, clear data.ffs_data, so that ffs_fs_mount() knows that
it doesn't need to kill the sucker manually - from that point on
we'll have it done by ->kill_sb().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: stable <stable@vger.kernel.org> # 3.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 16:22:29 -07:00
Benson Leung f123db8e9d driver core : Fix use after free of dev->parent in device_shutdown
The put_device(dev) at the bottom of the loop of device_shutdown
may result in the dev being cleaned up. In device_create_release,
the dev is kfreed.

However, device_shutdown attempts to use the dev pointer again after
put_device by referring to dev->parent.

Copy the parent pointer instead to avoid this condition.

This bug was found on Chromium OS's chromeos-3.8, which is based on v3.8.11.
See bug report : https://code.google.com/p/chromium/issues/detail?id=297842
This can easily be reproduced when shutting down with
hidraw devices that report battery condition.
Two examples are the HP Bluetooth Mouse X4000b and the Apple Magic Mouse.
For example, with the magic mouse :
The dev in question is "hidraw0"
dev->parent is "magicmouse"

In the course of the shutdown for this device, the input event cleanup calls
a put on hidraw0, decrementing its reference count.
When we finally get to put_device(dev) in device_shutdown, kobject_cleanup
is called and device_create_release does kfree(dev).
dev->parent is no longer valid, and we may crash in
put_device(dev->parent).

This change should be applied on any kernel with this change :
d1c6c030fc

Cc: stable@vger.kernel.org
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 14:46:11 -07:00
Eric W. Biederman 667b4102b3 sysfs: Allow mounting without CONFIG_NET
In kobj_ns_current_may_mount the default should be to allow the
mount.  The test is only for a single kobj_ns_type at a time, and unless
there is a reason to prevent it the mounting sysfs should be allowed.
Subsystems that are not registered can't have are not involved so can't
have a reason to prevent mounting sysfs.

This is a bug-fix to:
    commit 7dc5dbc879
    Author: Eric W. Biederman <ebiederm@xmission.com>
    Date:   Mon Mar 25 20:07:01 2013 -0700

        sysfs: Restrict mounting sysfs

        Don't allow mounting sysfs unless the caller has CAP_SYS_ADMIN rights
        over the net namespace.  The principle here is if you create or have
        capabilities over it you can mount it, otherwise you get to live with
        what other people have mounted.

        Instead of testing this with a straight forward ns_capable call,
        perform this check the long and torturous way with kobject helpers,
        this keeps direct knowledge of namespaces out of sysfs, and preserves
        the existing sysfs abstractions.

        Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
        Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

That came in via the userns tree during the 3.12 merge window.

Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 14:46:11 -07:00
K. Y. Srinivasan 8bbf9f440f Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout
commit 666b9adc80 terminated vmbus
version negotiation incorrectly. We need to terminate the version
negotiation only if the current negotiation were to timeout.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Olaf Hering <ohering@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 14:20:22 -07:00
K. Y. Srinivasan 3a4916050b Drivers: hv: util: Correctly support ws2008R2 and earlier
The current code does not correctly negotiate the version numbers for the util
driver when hosted on earlier hosts. The version numbers presented by this
driver were not compatible with the version numbers supported by Windows Server
2008. Fix this problem.

I would like to thank Olaf Hering (ohering@suse.com) for identifying the problem.

Reported-by: Olaf Hering <ohering@suse.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 14:20:21 -07:00
Alexander Usyskin 4a704575cc mei: cancel stall timers in mei_reset
Unset init_clients_timer and amthif_stall_timers
in mei_reset in order to cancel timer ticking and hence
avoid recursive reset calls.

Cc:  <stable@vger.kernel.org> # 3.9+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 13:56:53 -07:00
Tomas Winkler e2b31644e9 mei: bus: stop wait for read during cl state transition
Bus layer omitted check for client state transition while waiting
for read completion
The client state transition may occur for example as result
of firmware initiated reset

Add mei_cl_is_transitioning wrapper to reduce the code
repetition.:

Cc:  <stable@vger.kernel.org> # 3.9+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 13:56:53 -07:00
Tomas Winkler 1aee351a73 mei: make me client counters less error prone
1. u8 counters are prone to hard to detect overflow:
 make them unsigned long to match bit_ functions argument type

2. don't check me_clients_num for negativity, it is unsigned.

3. init all the me client counters from one place

Cc:  <stable@vger.kernel.org> # 3.9+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 13:56:53 -07:00
Gabor Juhos 2332575ef1 tty: ar933x_uart: move devicetree binding documentation
Commit 'tty: ar933x_uart: add device tree support
and binding documentation' introduced a new doc in
bindins/tty/serial.

According to a recent thread [1] on the linux-serial
list, the binding documentation of serial drivers
should be added into bindings/serial.

Move the documentation of qca,ar9330-uart to the
correct place.

  1. http://marc.info/?l=linux-serial&m=137771295411517

Cc: devicetree@vger.kernel.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 12:33:49 -07:00
Ramneek Mehresh ad1260e9fb fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
For controller versions greater than 1.6, setting ULPI_PHY_CLK_SEL
bit when USB_EN bit is already set causes instability issues with
PHY_CLK_VLD bit. So USB_EN is set only for IP controller version
below 1.6 before setting ULPI_PHY_CLK_SEL bit

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 11:59:57 -07:00
Mark Tinguely 997def25e4 xfs: fix node forward in xfs_node_toosmall
Commit f5ea1100 cleans up the disk to host conversions for
node directory entries, but because a variable is reused in
xfs_node_toosmall() the next node is not correctly found.
If the original node is small enough (<= 3/8 of the node size),
this change may incorrectly cause a node collapse when it should
not. That will cause an assert in xfstest generic/319:

   Assertion failed: first <= last && last < BBTOB(bp->b_length),
   file: /root/newest/xfs/fs/xfs/xfs_trans_buf.c, line: 569

Keep the original node header to get the correct forward node.

(When a node is considered for a merge with a sibling, it overwrites the
 sibling pointers of the original incore nodehdr with the sibling's
 pointers.  This leads to loop considering the original node as a merge
 candidate with itself in the second pass, and so it incorrectly
 determines a merge should occur.)

Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

[v3: added Dave Chinner's (slightly modified) suggestion to the commit header,
	cleaned up whitespace.  -bpm]
2013-09-26 10:38:17 -05:00
Marek Vasut 6d0bb81804 video: mxsfb: Add missing break
Add missing break into the restore function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 15:33:23 +03:00
Henrik Rydberg 5f45138643 hwmon: (applesmc) Check key count before proceeding
After reports from Chris and Josh Boyer of a rare crash in applesmc,
Guenter pointed at the initialization problem fixed below. The patch
has not been verified to fix the crash, but should be applied
regardless.

Reported-by: <jwboyer@fedoraproject.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-09-26 03:48:43 -07:00
Andrzej Hajda 60119a1d68 video: of: display_timing: correct display-timings node finding
of_get_display_timing(s) use of_find_node_by_name
to get child node, this is incorrect, of_get_child_by_name
should be used instead. The patch fixes it.
Small typo is also corrected.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 12:31:42 +03:00
Wei Yongjun 8c42cf7549 neofb: fix error return code in neofb_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:45:16 +03:00
Wei Yongjun a2a6fc5f18 s3fb: fix error return code in s3_pci_probe()
Fix to return -EINVAL when virtual vertical size smaller than real
instead of 0, as done elsewhere in this function. Also remove dup code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:45:15 +03:00
Uwe Kleine-König fb8a15079a video: mmp: drop needless devm cleanup
The nice thing about devm_* is that the driver doesn't need to free the
resources but the driver core takes care about that. This also
simplifies the error path quite a bit and removes the wrong check for a
clock pointer being NULL.

Russell King - ARM Linux <linux@arm.linux.org.uk>:
"And this patch also fixes the above: disabling/unpreparing _after_ putting
the thing - which was quite silly... :)"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:41:24 +03:00
Mark Brown 633358e9ff OMAPDSS: Add missing dependency on backlight for DSI-CM panel drier
The DSI-CM driver uses the backlight class so needs to build depend on it.

Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-26 11:38:10 +03:00
Mengdong Lin f82d7d16ae ALSA : hda - not use assigned converters for all unused pins
BIOS can mark a pin as "no physical connection" if the port is used by an
integrated display which is not audio capable. And audio driver will overlook
such pins.

On Haswell, such a disconneted pin will keep muted and connected to the 1st
converter by default. But if the 1st convertor is assigned to a connected pin
for audio streaming. The muted disconnected pin can make the connected pin
no sound output.

So this patch avoids using assigned converters for all unused pins for Haswell,
including the disconected pins.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Reviewed-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-26 10:22:49 +02:00
Liam Girdwood b26d19e44a ALSA: compress: Make sure we trigger STOP before closing the stream.
Currently we assume that userspace will shut down the compressed stream
correctly. However, if userspcae dies (e.g. cplay & ctrl-C) we dont
stop the stream before freeing it.

This now checks that the stream is stopped before freeing.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-26 09:28:22 +02:00