mirror of https://gitee.com/openkylin/linux.git
106 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Reza Arbab
|
a371d9f1cc |
memory-hotplug: use zone_can_shift() for sysfs valid_zones attribute
Since zone_can_shift() is being used to validate the target zone during onlining, it should also be used to determine the content of valid_zones. Link: http://lkml.kernel.org/r/1462816419-4479-4-git-send-email-arbab@linux.vnet.ibm.com Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Reviewd-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Vitaly Kuznetsov
|
31bc3858ea |
memory-hotplug: add automatic onlining policy for the newly added memory
Currently, all newly added memory blocks remain in 'offline' state
unless someone onlines them, some linux distributions carry special udev
rules like:
SUBSYSTEM=="memory", ACTION=="add", ATTR{state}=="offline", ATTR{state}="online"
to make this happen automatically. This is not a great solution for
virtual machines where memory hotplug is being used to address high
memory pressure situations as such onlining is slow and a userspace
process doing this (udev) has a chance of being killed by the OOM killer
as it will probably require to allocate some memory.
Introduce default policy for the newly added memory blocks in
/sys/devices/system/memory/auto_online_blocks file with two possible
values: "offline" which preserves the current behavior and "online"
which causes all newly added memory blocks to go online as soon as
they're added. The default is "offline".
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Dan Williams
|
260ae3f7db |
mm: skip memory block registration for ZONE_DEVICE
Prevent userspace from trying and failing to online ZONE_DEVICE pages
which are meant to never be onlined.
For example on platforms with a udev rule like the following:
SUBSYSTEM=="memory", ACTION=="add", ATTR{state}=="offline", ATTR{state}="online"
...will generate futile attempts to online the ZONE_DEVICE sections.
Example kernel messages:
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004747
Policy zone: Normal
online_pages [mem 0x248000000-0x24fffffff] failed
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
John Allen
|
cb5490a5ee |
drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64
Fix a bug where a kernel warning is triggered when performing a memory hotplug on ppc64. This warning may also occur on any architecture that uses the memory_probe_store interface. WARNING: at drivers/base/memory.c:200 CPU: 9 PID: 13042 Comm: systemd-udevd Not tainted 4.4.0-rc4-00113-g0bd0f1e-dirty #7 NIP [c00000000055e034] pages_correctly_reserved+0x134/0x1b0 LR [c00000000055e7f8] memory_subsys_online+0x68/0x140 Call Trace: memory_subsys_online+0x68/0x140 device_online+0xb4/0x120 store_mem_state+0xb0/0x180 dev_attr_store+0x34/0x60 sysfs_kf_write+0x64/0xa0 kernfs_fop_write+0x17c/0x1e0 __vfs_write+0x40/0x160 vfs_write+0xb8/0x200 SyS_write+0x60/0x110 system_call+0x38/0xd0 The warning is triggered because there is a udev rule that automatically tries to online memory after it has been added. The udev rule varies from distro to distro, but will generally look something like: SUBSYSTEM=="memory", ACTION=="add", ATTR{state}=="offline", ATTR{state}="online" On any architecture that uses memory_probe_store to reserve memory, the udev rule will be triggered after the first section of the block is reserved and will subsequently attempt to online the entire block, interrupting the memory reservation process and causing the warning. This patch modifies memory_probe_store to add a block of memory with a single call to add_memory as opposed to looping through and adding each section individually. A single call to add_memory is protected by the mem_hotplug mutex which will prevent the udev rule from onlining memory until the reservation of the entire block is complete. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Seth Jennings
|
cc292b0b43 |
drivers/base/memory.c: rename remove_memory_block() to remove_memory_section()
The function removes a section, not a block. Rename to reflect actual functionality. Signed-off-by: Seth Jennings <sjennings@variantweb.net> Cc: Andrew Banman <abanman@sgi.com> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Russ Anderson <rja@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Seth Jennings
|
56c6b5d3ac |
drivers/base/memory.c: clean up section counting
Right now, section_count is calculated in add_memory_block(). However, init_memory_block() increments section_count as well, which, at first, seems like it would lead to an off-by-one error. There is no harm done because add_memory_block() immediately overwrites the mem->section_count, but it is messy. This commit moves the increment out of the common init_memory_block() (called by both add_memory_block() and register_new_memory()) and adds it to register_new_memory(). Signed-off-by: Seth Jennings <sjennings@variantweb.net> Cc: Andrew Banman <abanman@sgi.com> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Russ Anderson <rja@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Seth Jennings
|
26bbe7ef6d |
drivers/base/memory.c: prohibit offlining of memory blocks with missing sections
Commit |
|
|
David Rientjes
|
30467e0b3b |
mm, hotplug: fix concurrent memory hot-add deadlock
There's a deadlock when concurrently hot-adding memory through the probe interface and switching a memory block from offline to online. When hot-adding memory via the probe interface, add_memory() first takes mem_hotplug_begin() and then device_lock() is later taken when registering the newly initialized memory block. This creates a lock dependency of (1) mem_hotplug.lock (2) dev->mutex. When switching a memory block from offline to online, dev->mutex is first grabbed in device_online() when the write(2) transitions an existing memory block from offline to online, and then online_pages() will take mem_hotplug_begin(). This creates a lock inversion between mem_hotplug.lock and dev->mutex. Vitaly reports that this deadlock can happen when kworker handling a probe event races with systemd-udevd switching a memory block's state. This patch requires the state transition to take mem_hotplug_begin() before dev->mutex. Hot-adding memory via the probe interface creates a memory block while holding mem_hotplug_begin(), there is no way to take dev->mutex first in this case. online_pages() and offline_pages() are only called when transitioning memory block state. We now require that mem_hotplug_begin() is taken before calling them -- this requires exporting the mem_hotplug_begin() and mem_hotplug_done() to generic code. In all hot-add and hot-remove cases, mem_hotplug_begin() is done prior to device_online(). This is all that is needed to avoid the deadlock. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Sheng Yong
|
19c07d5e04 |
memory hotplug: use macro to switch between section and pfn
Use macro section_nr_to_pfn() to switch between section and pfn, instead of open-coding it. No semantic changes. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Ioana Ciornei
|
2aeebca2f3 |
drivers: base: memory: Use tabs instead of spaces
This patch changes spaces to tabs. Found using checkpatch.pl Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Ioana Ciornei
|
3d3af6afa9 |
drivers: base: memory: Fix switch indent
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Zhang Zhen
|
71fbd556ad |
memory-hotplug: remove redundant call of page_to_pfn
This is just a small optimization. The start_pfn can be obtained directly by phys_index << PFN_SECTION_SHIFT. So the call of page_to_pfn() is redundant and remove it. Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@sr71.net> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Zhang Zhen
|
ed2f240094 |
memory-hotplug: add sysfs valid_zones attribute
Currently memory-hotplug has two limits: 1. If the memory block is in ZONE_NORMAL, you can change it to ZONE_MOVABLE, but this memory block must be adjacent to ZONE_MOVABLE. 2. If the memory block is in ZONE_MOVABLE, you can change it to ZONE_NORMAL, but this memory block must be adjacent to ZONE_NORMAL. With this patch, we can easy to know a memory block can be onlined to which zone, and don't need to know the above two limits. Updated the related Documentation. [akpm@linux-foundation.org: use conventional comment layout] [akpm@linux-foundation.org: fix build with CONFIG_MEMORY_HOTREMOVE=n] [akpm@linux-foundation.org: remove unused local zone_prev] Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Wang Nan <wangnan0@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Zhang Zhen
|
b69deb2b7e |
mm/mem-hotplug: replace simple_strtoull() with kstrtoull()
Use the newer and more pleasant kstrtoull() to replace simple_strtoull(), because simple_strtoull() is marked for obsoletion. Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Tang Chen
|
4f7c6b49c4 |
mem-hotplug: introduce MMOP_OFFLINE to replace the hard coding -1
In store_mem_state(), we have: ... 334 else if (!strncmp(buf, "offline", min_t(int, count, 7))) 335 online_type = -1; ... 355 case -1: 356 ret = device_offline(&mem->dev); 357 break; ... Here, "offline" is hard coded as -1. This patch does the following renaming: ONLINE_KEEP -> MMOP_ONLINE_KEEP ONLINE_KERNEL -> MMOP_ONLINE_KERNEL ONLINE_MOVABLE -> MMOP_ONLINE_MOVABLE and introduces MMOP_OFFLINE = -1 to avoid hard coding. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Hu Tao <hutao@cn.fujitsu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Tang Chen
|
1f6a6cc82e |
mem-hotplug: avoid illegal state prefixed with legal state when changing state of memory_block
We use the following command to online a memory_block:
echo online|online_kernel|online_movable > /sys/devices/system/memory/memoryXXX/state
But, if we do the following:
echo online_fhsjkghfkd > /sys/devices/system/memory/memoryXXX/state
the block will also be onlined.
This is because the following code in store_mem_state() does not compare
the whole string, but only the prefix of the string.
store_mem_state()
{
......
328 if (!strncmp(buf, "online_kernel", min_t(int, count, 13)))
Here, only compare the first 13 letters of the string. If we give "online_kernelXXXXXX",
it will be recognized as online_kernel, which is incorrect.
329 online_type = ONLINE_KERNEL;
330 else if (!strncmp(buf, "online_movable", min_t(int, count, 14)))
We have the same problem here,
331 online_type = ONLINE_MOVABLE;
332 else if (!strncmp(buf, "online", min_t(int, count, 6)))
here,
(Here is more problematic. If we give online_movalbe, which is a typo
of online_movable, it will be recognized as online without noticing the
author.)
333 online_type = ONLINE_KEEP;
334 else if (!strncmp(buf, "offline", min_t(int, count, 7)))
and here.
335 online_type = -1;
336 else {
337 ret = -EINVAL;
338 goto err;
339 }
......
}
This patch fixes this problem by using sysfs_streq() to compare the
whole string.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reported-by: Hu Tao <hutao@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Li Zhong
|
56a3c655a3 |
memory-hotplug: update documentation to hide information about SECTIONS and remove end_phys_index
Seems we all agree that information about SECTION, e.g. section size, sections per memory block should be kept as kernel internals, and not exposed to userspace. This patch updates Documentation/memory-hotplug.txt to refer to memory blocks instead of memory sections where appropriate and added a paragraph to explain that memory blocks are made of memory sections. The documentation update is mostly provided by Nathan. Also, as end_phys_index in code is actually not the end section id, but the end memory block id, which should always be the same as phys_index. So it is removed here. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yasuaki Ishimatsu
|
a37f86305c |
driver core: Release device_hotplug_lock when store_mem_state returns EINVAL
When inserting a wrong value to /sys/devices/system/memory/memoryX/state file,
following messages are shown. And device_hotplug_lock is never released.
================================================
[ BUG: lock held when returning to user space! ]
3.12.0-rc4-debug+ #3 Tainted: G W
------------------------------------------------
bash/6442 is leaving the kernel with locks still held!
1 lock held by bash/6442:
#0: (device_hotplug_lock){+.+.+.}, at: [<ffffffff8146cbb5>] lock_device_hotplug_sysfs+0x15/0x50
This issue was introdued by commit
|
|
|
Linus Torvalds
|
40031da445 |
ACPI and power management updates for 3.12-rc1
1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
of Intel Thunderbolt support on systems that use ACPI for signalling
Thunderbolt hotplug events. This also should make ACPIPHP work in
some cases in which it was known to have problems. From
Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.
2) ACPI core code cleanups and dock station support cleanups from
Jiang Liu and Rafael J Wysocki.
3) Fixes for locking problems related to ACPI device hotplug from
Rafael J Wysocki.
4) ACPICA update to version 20130725 includig fixes, cleanups, support
for more than 256 GPEs per GPE block and a change to make the ACPI
PM Timer optional (we've seen systems without the PM Timer in the
field already). One of the fixes, related to the DeRefOf operator,
is necessary to prevent some Windows 8 oriented AML from causing
problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim.
5) Removal of the old and long deprecated /proc/acpi/event interface
and related driver changes from Thomas Renninger.
6) ACPI and Xen changes to make the reduced hardware sleep work with
the latter from Ben Guthro.
7) ACPI video driver cleanups and a blacklist of systems that should
not tell the BIOS that they are compatible with Windows 8 (or ACPI
backlight and possibly other things will not work on them). From
Felipe Contreras.
8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
Toshi Kani, and Wei Yongjun.
9) cpufreq ondemand governor target frequency selection change to
reduce oscillations between min and max frequencies (essentially,
it causes the governor to choose target frequencies proportional
to load) from Stratos Karafotis.
10) cpufreq fixes allowing sysfs attributes file permissions to be
preserved over suspend/resume cycles Srivatsa S Bhat.
11) Removal of Device Tree parsing for CPU device nodes from multiple
cpufreq drivers that required some changes related to
of_get_cpu_node() to be made in a few architectures and in the
driver core. From Sudeep KarkadaNagesha.
12) cpufreq core fixes and cleanups related to mutual exclusion and
driver module references from Viresh Kumar, Lukasz Majewski and
Rafael J Wysocki.
13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
Stratos Karafotis, and Viresh Kumar.
14) Fixes to prevent race conditions in coupled cpuidle from happening
from Colin Cross.
15) cpuidle core fixes and cleanups from Daniel Lezcano and
Tuukka Tikkanen.
16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
and Sahara.
17) System sleep tracing changes from Todd E Brandt and Shuah Khan.
18) PNP subsystem conversion to using struct dev_pm_ops for power
management from Shuah Khan.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=CgqW
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
of Intel Thunderbolt support on systems that use ACPI for signalling
Thunderbolt hotplug events. This also should make ACPIPHP work in
some cases in which it was known to have problems. From
Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.
2) ACPI core code cleanups and dock station support cleanups from
Jiang Liu and Rafael J Wysocki.
3) Fixes for locking problems related to ACPI device hotplug from
Rafael J Wysocki.
4) ACPICA update to version 20130725 includig fixes, cleanups, support
for more than 256 GPEs per GPE block and a change to make the ACPI
PM Timer optional (we've seen systems without the PM Timer in the
field already). One of the fixes, related to the DeRefOf operator,
is necessary to prevent some Windows 8 oriented AML from causing
problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim.
5) Removal of the old and long deprecated /proc/acpi/event interface
and related driver changes from Thomas Renninger.
6) ACPI and Xen changes to make the reduced hardware sleep work with
the latter from Ben Guthro.
7) ACPI video driver cleanups and a blacklist of systems that should
not tell the BIOS that they are compatible with Windows 8 (or ACPI
backlight and possibly other things will not work on them). From
Felipe Contreras.
8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
Toshi Kani, and Wei Yongjun.
9) cpufreq ondemand governor target frequency selection change to
reduce oscillations between min and max frequencies (essentially,
it causes the governor to choose target frequencies proportional
to load) from Stratos Karafotis.
10) cpufreq fixes allowing sysfs attributes file permissions to be
preserved over suspend/resume cycles Srivatsa S Bhat.
11) Removal of Device Tree parsing for CPU device nodes from multiple
cpufreq drivers that required some changes related to
of_get_cpu_node() to be made in a few architectures and in the
driver core. From Sudeep KarkadaNagesha.
12) cpufreq core fixes and cleanups related to mutual exclusion and
driver module references from Viresh Kumar, Lukasz Majewski and
Rafael J Wysocki.
13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
Stratos Karafotis, and Viresh Kumar.
14) Fixes to prevent race conditions in coupled cpuidle from happening
from Colin Cross.
15) cpuidle core fixes and cleanups from Daniel Lezcano and
Tuukka Tikkanen.
16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
and Sahara.
17) System sleep tracing changes from Todd E Brandt and Shuah Khan.
18) PNP subsystem conversion to using struct dev_pm_ops for power
management from Shuah Khan.
* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
cpufreq: Don't use smp_processor_id() in preemptible context
cpuidle: coupled: fix race condition between pokes and safe state
cpuidle: coupled: abort idle if pokes are pending
cpuidle: coupled: disable interrupts after entering safe state
ACPI / hotplug: Remove containers synchronously
driver core / ACPI: Avoid device hot remove locking issues
cpufreq: governor: Fix typos in comments
cpufreq: governors: Remove duplicate check of target freq in supported range
cpufreq: Fix timer/workqueue corruption due to double queueing
ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
ACPI / thermal: Add check of "_TZD" availability and evaluating result
cpufreq: imx6q: Fix clock enable balance
ACPI: blacklist win8 OSI for buggy laptops
cpufreq: tegra: fix the wrong clock name
cpuidle: Change struct menu_device field types
cpuidle: Add a comment warning about possible overflow
cpuidle: Fix variable domains in get_typical_interval()
cpuidle: Fix menu_device->intervals type
cpuidle: CodingStyle: Break up multiple assignments on single line
cpuidle: Check called function parameter in get_typical_interval()
...
|
|
|
Linus Torvalds
|
542a086ac7 |
Driver core patches for 3.12-rc1
Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.21 (GNU/Linux) iEYEABECAAYFAlIlIPcACgkQMUfUDdst+ynUMwCaAnITsxyDXYQ4DqEsz8EcOtMk 718AoLrgnUZs3B+70AT34DVktg4HSThk =USl9 -----END PGP SIGNATURE----- Merge tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ... |
|
|
Rafael J. Wysocki
|
5e33bc4165 |
driver core / ACPI: Avoid device hot remove locking issues
device_hotplug_lock is held around the acpi_bus_trim() call in acpi_scan_hot_remove() which generally removes devices (it removes ACPI device objects at least, but it may also remove "physical" device objects through .detach() callbacks of ACPI scan handlers). Thus, potentially, device sysfs attributes are removed under that lock and to remove those attributes it is necessary to hold the s_active references of their directory entries for writing. On the other hand, the execution of a .show() or .store() callback from a sysfs attribute is carried out with that attribute's s_active reference held for reading. Consequently, if any device sysfs attribute that may be removed from within acpi_scan_hot_remove() through acpi_bus_trim() has a .store() or .show() callback which acquires device_hotplug_lock, the execution of that callback may deadlock with the removal of the attribute. [Unfortunately, the "online" device attribute of CPUs and memory blocks is one of them.] To avoid such deadlocks, make all of the sysfs attribute callbacks that need to lock device hotplug, for example store_online(), use a special function, lock_device_hotplug_sysfs(), to lock device hotplug and return the result of that function immediately if it is not zero. This will cause the s_active reference of the directory entry in question to be released and the syscall to be restarted if device_hotplug_lock cannot be acquired. [show_online() actually doesn't need to lock device hotplug, but it is useful to serialize it with respect to device_offline() and device_online() for the same device (in case user space attempts to run them concurrently) which can be done with the help of device_lock().] Reported-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reported-and-tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Toshi Kani <toshi.kani@hp.com> |
|
|
Russ Anderson
|
21ea9f5ace |
drivers/base/memory.c: fix show_mem_removable() to handle missing sections
"cat /sys/devices/system/memory/memory*/removable" crashed the system.
The problem is that show_mem_removable() is passing a
bad pfn to is_mem_section_removable(), which causes
if (!node_online(page_to_nid(page)))
to blow up. Why is it passing in a bad pfn?
The reason is that show_mem_removable() will loop sections_per_block
times. sections_per_block is 16, but mem->section_count is 8,
indicating holes in this memory block. Checking that the memory section
is present before checking to see if the memory section is removable
fixes the problem.
harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable
0
1
1
1
1
1
1
1
1
1
1
1
1
1
BUG: unable to handle kernel paging request at ffffea00c3200000
IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90
PGD 83ffd4067 PUD 37bdfce067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod
CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10
Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013
task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000
RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90
RSP: 0018:ffff880820023df8 EFLAGS: 00010287
RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004
RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000
RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000
R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001
FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0
Call Trace:
show_mem_removable+0x41/0x70
dev_attr_show+0x2a/0x60
sysfs_read_file+0xf7/0x1c0
vfs_read+0xc8/0x130
SyS_read+0x5d/0xa0
system_call_fastpath+0x16/0x1b
Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Gu Zheng
|
7315f0ccfc |
drivers/base/memory.c: introduce help macro to_memory_block
Introduce help macro to_memory_block to hide the conversion(device-->memory_block), just clean up. Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
fa2be40fe7 |
drivers: base: use standard device online/offline for state change
There are two ways to set the online/offline state for a memory block: echo 0|1 > online and echo online|online_kernel|online_movable|offline > state. The state attribute can online a memory block with extra data, the "online type", where the online attribute uses a default online type of ONLINE_KEEP, same as echo online > state. Currently there is a state_mutex that provides consistency between the memory block state and the underlying memory. The problem is that this code does a lot of things that the common device layer can do for us, such as the serialization of the online/offline handlers using the device lock, setting the dev->offline field, and calling kobject_uevent(). This patch refactors the online/offline code to allow the common device_[online|offline] functions to be used. The result is a simpler and more common code path for the two state setting mechanisms. It also removes the state_mutex from the struct memory_block as the memory block device lock provides the state consistency. No functional change is intended by this patch. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
cb5e39b803 |
drivers: base: refactor add_memory_section() to add_memory_block()
Right now memory_dev_init() maintains the memory block pointer between iterations of add_memory_section(). This is nasty. This patch refactors add_memory_section() to become add_memory_block(). The refactoring pulls the section scanning out of memory_dev_init() and simplifies the signature. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
37171e3cb7 |
drivers: base: remove improper get/put in add_memory_section()
The path through add_memory_section() when the memory block already exists uses flawed refcounting logic. A get_device() is done on a memory block using a pointer that might not be valid as we dropped our previous reference and didn't obtain a new reference in the proper way. Lets stop pretending and just remove the get/put. The mem_sysfs_mutex, which we hold over the entire init loop now, will prevent the memory blocks from disappearing from under us. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
37a7bd6255 |
drivers: base: reduce add_memory_section() for boot-time only
Now that add_memory_section() is only called from boot time, reduce the logic and remove the enum. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
d7f80530ad |
drivers: base: unshare add_memory_section() from hotplug
add_memory_section() is currently called from both boot time and run time via hotplug and there is a lot of nastiness to allow for shared code including an enum parameter to convey the calling context to add_memory_section(). This patch is the first step in breaking up the messy code sharing by pulling the hotplug path for add_memory_section() directly into register_new_memory(). Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
df2b717c66 |
drivers: base: use device get/put functions
Use the [get|put]_device functions for ref'ing the memory block device rather than the kobject functions which should be hidden away by the device layer. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
879f1bec8e |
drivers: base: remove unneeded variable
The error variable is not needed. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Seth Jennings
|
b1eaef3da5 |
drivers: base: move mutex lock out of add_memory_section()
There is no point in releasing the mutex for each section that is added during boot time. Just hold it over the entire initialization loop. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Jingoo Han
|
34da5e6770 |
driver core: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because strict_strto*() is obsolete. Thus, kstrto*() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Linus Torvalds
|
f991fae5c6 |
Power management and ACPI updates for 3.11-rc1
- Hotplug changes allowing device hot-removal operations to fail gracefully (instead of crashing the kernel) if they cannot be carried out completely. From Rafael J Wysocki and Toshi Kani. - Freezer update from Colin Cross and Mandeep Singh Baines targeted at making the freezing of tasks a bit less heavy weight operation. - cpufreq resume fix from Srivatsa S Bhat for a regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. - New freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus from Lan Tianyu. - cpufreq fixes and cleanups from Viresh Kumar, Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - Fix for an ACPICA regression causing suspend/resume issues to appear on some systems introduced during the 3.4 development cycle from Lv Zheng. - ACPICA fixes and cleanups from Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - New cupidle driver for Xilinx Zynq processors from Michal Simek. - cpuidle fixes and cleanups from Daniel Lezcano. - Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk. - ACPI device power management fixes and cleanups from Fengguang Wu and Rafael J Wysocki. - ACPI documentation updates from Lv Zheng, Aaron Lu and Hanjun Guo. - Fix for the IA-64 issue that was the reason for reverting commit |
|
|
Nathan Fontenot
|
96b2c0fc8e |
drivers/base: Use attribute groups to create sysfs memory files
Update the sysfs memory code to create/delete files at the time of device and subsystem registration. The current code creates files in the root memory directory explicitly through the use of init_* routines. The files for each memory block are created and deleted explicitly using the mem_[create|delete]_simple_file macros. This patch creates attribute groups for the memory root files and files in each memory block directory so that they are created and deleted implicitly at subsys and device register and unregister time. This did necessitate moving the register_memory() updating it to set the dev.groups field. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Rafael J. Wysocki
|
ea50be5934 |
Driver core / MM: Drop offline_memory_block()
Since offline_memory_block(mem) is functionally equivalent to device_offline(&mem->dev), make the only caller of the former use the latter instead and drop offline_memory_block() entirely. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Toshi Kani <toshi.kani@hp.com> |
|
|
Rafael J. Wysocki
|
b2c064b25a |
Driver core / memory: Simplify __memory_block_change_state()
As noted by Tang Chen, the last_online field in struct memory_block
introduced by commit
|
|
|
Rafael J. Wysocki
|
4960e05e22 |
Driver core: Introduce offline/online callbacks for memory blocks
Introduce .offline() and .online() callbacks for memory_subsys that will allow the generic device_offline() and device_online() to be used with device objects representing memory blocks. That, in turn, allows the ACPI subsystem to use device_offline() to put removable memory blocks offline, if possible, before removing memory modules holding them. The 'online' sysfs attribute of memory block devices will attempt to put them offline if 0 is written to it and will attempt to apply the previously used online type when onlining them (i.e. when 1 is written to it). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Toshi Kani <toshi.kani@hp.com> |
|
|
Tang Chen
|
6056d619a8 |
mm: Remove unused parameter of pages_correctly_reserved()
nr_pages is not used in pages_correctly_reserved(). So remove it. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Wen Congyang <wency@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
David Rientjes
|
4edd7ceff0 |
mm, hotplug: avoid compiling memory hotremove functions when disabled
__remove_pages() is only necessary for CONFIG_MEMORY_HOTREMOVE. PowerPC pseries will return -EOPNOTSUPP if unsupported. Adding an #ifdef causes several other functions it depends on to also become unnecessary, which saves in .text when disabled (it's disabled in most defconfigs besides powerpc, including x86). remove_memory_block() becomes static since it is not referenced outside of drivers/base/memory.c. Build tested on x86 and powerpc with CONFIG_MEMORY_HOTREMOVE both enabled and disabled. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yasuaki Ishimatsu
|
6677e3eaf4 |
memory-hotplug: check whether all memory blocks are offlined or not when removing memory
We remove the memory like this: 1. lock memory hotplug 2. offline a memory block 3. unlock memory hotplug 4. repeat 1-3 to offline all memory blocks 5. lock memory hotplug 6. remove memory(TODO) 7. unlock memory hotplug All memory blocks must be offlined before removing memory. But we don't hold the lock in the whole operation. So we should check whether all memory blocks are offlined before step6. Otherwise, kernel maybe panicked. Offlining a memory block and removing a memory device can be two different operations. Users can just offline some memory blocks without removing the memory device. For this purpose, the kernel has held lock_memory_hotplug() in __offline_pages(). To reuse the code for memory hot-remove, we repeat step 1-3 to offline all the memory blocks, repeatedly lock and unlock memory hotplug, but not hold the memory hotplug lock in the whole operation. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Felipe Balbi
|
74fef7a8fd |
base: memory: fix soft/hard_offline_page permissions
those two sysfs files don't have a 'show' method, so they shouldn't have a read permission. Thanks to Greg Kroah-Hartman for actually looking into the source code and figuring out we had a real bug with these two files. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Lai Jiangshan
|
511c2aba8f |
mm, memory-hotplug: dynamic configure movable memory and portion memory
Add online_movable and online_kernel for logic memory hotplug. This is the dynamic version of "movablecore" & "kernelcore". We have the same reason to introduce it as to introduce "movablecore" & "kernelcore". It has the same motive as "movablecore" & "kernelcore", but it is dynamic/running-time: o We can configure memory as kernelcore or movablecore after boot. Userspace workload is increased, we need more hugepage, we can't use "online_movable" to add memory and allow the system use more THP(transparent-huge-page), vice-verse when kernel workload is increase. Also help for virtualization to dynamic configure host/guest's memory, to save/(reduce waste) memory. Memory capacity on Demand o When a new node is physically online after boot, we need to use "online_movable" or "online_kernel" to configure/portion it as we expected when we logic-online it. This configuration also helps for physically-memory-migrate. o all benefit as the same as existed "movablecore" & "kernelcore". o Preparing for movable-node, which is very important for power-saving, hardware partitioning and high-available-system(hardware fault management). (Note, we don't introduce movable-node here.) Action behavior: When a memoryblock/memorysection is onlined by "online_movable", the kernel will not have directly reference to the page of the memoryblock, thus we can remove that memory any time when needed. When it is online by "online_kernel", the kernel can use it. When it is online by "online", the zone type doesn't changed. Current constraints: Only the memoryblock which is adjacent to the ZONE_MOVABLE can be online from ZONE_NORMAL to ZONE_MOVABLE. [akpm@linux-foundation.org: use min_t, cleanups] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Yasuaki Ishimatsu
|
fa7194eb99 |
memory hotplug: suppress "Device memoryX does not have a release() function" warning
When calling remove_memory_block(), the function shows following message at device_release(). "Device 'memory528' does not have a release() function, it is broken and must be fixed." The reason is memory_block's device struct does not have a release() function. So the patch registers memory_block_release() to the device's release() function for suppressing the warning message. Additionally, the patch moves kfree(mem) into the release function since the release function is prepared as a means to free a memory_block struct. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Wen Congyang
|
e90bdb7f52 |
memory-hotplug: update memory block's state and notify userspace
remove_memory() will be called when hot removing a memory device. But even if offlining memory, we cannot notice it. So the patch updates the memory block's state and sends notification to userspace. Additionally, the memory device may contain more than one memory block. If the memory block has been offlined, __offline_pages() will fail. So we should try to offline one memory block at a time. Thus remove_memory() also check each memory block's state. So there is no need to check the memory block's state before calling remove_memory(). Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Wen Congyang
|
a16cee10c7 |
memory-hotplug: preparation to notify memory block's state at memory hot remove
remove_memory() is called in two cases:
1. echo offline >/sys/devices/system/memory/memoryXX/state
2. hot remove a memory device
In the 1st case, the memory block's state is changed and the notification
that memory block's state changed is sent to userland after calling
remove_memory(). So user can notice memory block is changed.
But in the 2nd case, the memory block's state is not changed and the
notification is not also sent to userspcae even if calling
remove_memory(). So user cannot notice memory block is changed.
For adding the notification at memory hot remove, the patch just prepare
as follows:
1st case uses offline_pages() for offlining memory.
2nd case uses remove_memory() for offlining memory and changing memory block's
state and notifing the information.
The patch does not implement notification to remove_memory().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Ingo Molnar
|
cd593accdc |
Linux 3.3-rc7
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iQEcBAABAgAGBQJPW8yUAAoJEHm+PkMAQRiGhFIH/RGUPxGmUkJv8EP5I4HDA4dJ c6/PrzZCHs8rxzYzvn7ojXqZGXTOAA5ZgS9A6LkJ2sxMFvgMnkpFi6B4CwMzizS3 vLWo/HNxbiTCNGFfQrhQB8O58uNI8wOBa87lrQfkXkDqN0cFhdjtIxeY1BD9LXIo qbWysGxCcZhJWHapsQ3NZaVJQnIK5vA/+mhyYP4HzbcHI3aWnbIEZ8GQKeY28Ch0 +pct5UQBjZavV5SujaW0Xd65oIiycm8XHAQw6FxQy//DfaabauWgFteR162Q/oew xxUBDOHF3nO1bdteHHaYqxig0j1MbIHsqxTnE/neR8UryF04//1SFF7DYuY/1pg= =SV5V -----END PGP SIGNATURE----- Merge tag 'v3.3-rc7' into x86/mce Merge reason: Update from an ancient -rc1 base to an almost-final stable kernel. Signed-off-by: Ingo Molnar <mingo@elte.hu> |
|
|
Yinghai Lu
|
321bf4ed5f |
drivers/base/memory.c: fix memory_dev_init() long delay
One system with 2048g ram, reported soft lockup on recent kernel. [ 34.426749] cpu_dev_init done [ 61.166399] BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] [ 61.166733] Modules linked in: [ 61.166904] irq event stamp: 1935610 [ 61.178431] hardirqs last enabled at (1935609): [<ffffffff81ce8c05>] mutex_lock_nested+0x299/0x2b4 [ 61.178923] hardirqs last disabled at (1935610): [<ffffffff81cf2bab>] apic_timer_interrupt+0x6b/0x80 [ 61.198767] softirqs last enabled at (1935476): [<ffffffff8106e59c>] __do_softirq+0x195/0x1ab [ 61.218604] softirqs last disabled at (1935471): [<ffffffff81cf359c>] call_softirq+0x1c/0x30 [ 61.238408] CPU 0 [ 61.238549] Modules linked in: [ 61.238744] [ 61.238825] Pid: 1, comm: swapper/0 Not tainted 3.3.0-rc1-tip-yh-02076-g962f689-dirty #171 [ 61.278212] RIP: 0010:[<ffffffff810b3e3a>] [<ffffffff810b3e3a>] lock_release+0x90/0x9c [ 61.278627] RSP: 0018:ffff883f64dbfd70 EFLAGS: 00000246 [ 61.298287] RAX: ffff883f64dc0000 RBX: 0000000000000000 RCX: 000000000000008b [ 61.298690] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 61.318383] RBP: ffff883f64dbfda0 R08: 0000000000000001 R09: 000000000000008b [ 61.338215] R10: 0000000000000000 R11: 0000000000000000 R12: ffff883f64dbfd10 [ 61.338610] R13: ffff883f64dc0708 R14: ffff883f64dc0708 R15: ffffffff81095657 [ 61.358299] FS: 0000000000000000(0000) GS:ffff883f7d600000(0000) knlGS:0000000000000000 [ 61.378118] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 61.378450] CR2: 0000000000000000 CR3: 00000000024af000 CR4: 00000000000007f0 [ 61.398144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 61.417918] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 61.418260] Process swapper/0 (pid: 1, threadinfo ffff883f64dbe000, task ffff883f64dc0000) [ 61.445358] Stack: [ 61.445511] 0000000000000002 ffff897f649ba168 ffff883f64dbfe10 ffff88ff64bb57a8 [ 61.458040] 0000000000000000 0000000000000000 ffff883f64dbfdc0 ffffffff81ceb1b4 [ 61.458491] 000000000011608c ffff88ff64bb58a8 ffff883f64dbfdf0 ffffffff81c57638 [ 61.478215] Call Trace: [ 61.478367] [<ffffffff81ceb1b4>] _raw_spin_unlock+0x21/0x2e [ 61.497994] [<ffffffff81c57638>] klist_next+0x9e/0xbc [ 61.498264] [<ffffffff8148ba99>] next_device+0xe/0x1e [ 61.517867] [<ffffffff8148c0cc>] subsys_find_device_by_id+0xb7/0xd6 [ 61.518197] [<ffffffff81498846>] find_memory_block_hinted+0x3d/0x66 [ 61.537927] [<ffffffff8149887f>] find_memory_block+0x10/0x12 [ 61.538193] [<ffffffff814988b6>] add_memory_section+0x35/0x9e [ 61.557932] [<ffffffff827fecef>] memory_dev_init+0x68/0xda [ 61.558227] [<ffffffff827fec01>] driver_init+0x97/0xa7 [ 61.577853] [<ffffffff827cdf3c>] kernel_init+0xf6/0x1c0 [ 61.578140] [<ffffffff81cf34a4>] kernel_thread_helper+0x4/0x10 [ 61.597850] [<ffffffff81ceb59d>] ? retint_restore_args+0xe/0xe [ 61.598144] [<ffffffff827cde46>] ? start_kernel+0x3ab/0x3ab [ 61.617826] [<ffffffff81cf34a0>] ? gs_change+0xb/0xb [ 61.618060] Code: 10 48 83 3b 00 eb e8 4c 89 f2 44 89 fe 4c 89 ef e8 e1 fe ff ff 65 48 8b 04 25 40 bc 00 00 c7 80 cc 06 00 00 00 00 00 00 41 54 9d <5e> 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 41 57 41 89 cf [ 89.285380] memory_dev_init done Finally it takes about 55s to create 16400 memory entries. Root cause: for x86_64, 2048g (with 2g hole at [2g,4g), and TOP2 will be 2050g), will have 16400 memory block. find_memory_block/subsys_find_device_by_id will be expensive with that many entries. Actually, we don't need to find that memory block for BOOT path. Skip that finding make it get back to normal. [ 34.466696] cpu_dev_init done [ 35.290080] memory_dev_init done Also solved the delay with topology_init when sections_per_block is not 1. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Nathan Fontenot <nfont@austin.ibm.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Ingo Molnar
|
4e9f44ba29 |
MCE recovery (data path only)
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAABAgAGBQJPHy7VAAoJEKurIx+X31iBHcsP/1VcGuxFAL5i/zBqUqhbS7BL s+4or1j3NOcxIePQ9egg1L/sLzD+jmo37ObFMTzFOLwuLeodtJF6e0DXQhR7bMKz UqOS4WAhNxRBtZtUqIbIiMoDG4Vny1atdqxDQKzmV88ulTG2+JE5U6sGjfTdWvX7 gZA6Vj31Dz7p6scPT2j8tnLjFV+XvVJSBp/2rgi2Nw81UzBeIRZRiWZrBMLemPCU T82OEffnIpSdn60sktMN/ht99yGQO31zT0c+/72Z0ysZAPlTjFbW7CZJHPZmLIVB tPkoTRFOf4iwjy2pZNzs9bB8ord/As3IyTxAsfYUin4N2bX27n058uTQ3CqbgEz+ pa6C5N0ZrV9plYa9BbgCHmNIkhEONIb3WtH27uh/hZOztDA2CXzPT5mm4FOzmrJ7 DGVBqmXth6g2jYJNT/K2QgmVMZM0CeXQnoDJP54sXzv7F4dEM5P64Lz6E1kCd5Jf x9O1orDnEVXssgEPVtF/eEjIQK/vF7s1BUUlMBZJwdAyTwCiD8RvueG87bApnA2z eO8VS62akqjpDt5sHboAGJrjcuhqnkbgtG2dn0EqONzk8DJPnhFXVLmSbvH+KuTC OguH2LC5N7n9Wjr5a9Duw2DdIj8njvzFrKVzo/l6r3m99u/Jby54vGk2cPLwfGvp /9Y+SK2Ou6LSbPiRU4dP =ofSb -----END PGP SIGNATURE----- Merge tag 'mce-recovery-for-tip' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/mce Implement MCE recovery for the data load error path and assorted cleanups. Signed-off-by: Ingo Molnar <mingo@elte.hu> |
|
|
Michael Holzheu
|
f5138e4221 |
kdump: add udev events for memory online/offline
Currently no udev events for memory hotplug "online" and "offline" are generated: # udevadm monitor # echo offline > /sys/devices/system/memory/memory4/state ==> No event When kdump is loaded, kexec detects the current memory configuration and stores it in the pre-allocated ELF core header. Therefore, for kdump it is necessary to reload the kdump kernel with kexec when the memory configuration changes (e.g. for online/offline hotplug memory). In order to do this automatically, udev rules should be used. This kernel patch adds udev events for "online" and "offline". Together with this kernel patch, the following udev rules for online/offline have to be added to "/etc/udev/rules.d/98-kexec.rules": SUBSYSTEM=="memory", ACTION=="online", PROGRAM="/etc/init.d/kdump restart" SUBSYSTEM=="memory", ACTION=="offline", PROGRAM="/etc/init.d/kdump restart" [sfr@canb.auug.org.au: fixups for class to subsystem conversion] Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Tony Luck
|
cd42f4a3b2 |
HWPOISON: Clean up memory_failure() vs. __memory_failure()
There is only one caller of memory_failure(), all other users call __memory_failure() and pass in the flags argument explicitly. The lone user of memory_failure() will soon need to pass flags too. Add flags argument to the callsite in mce.c. Delete the old memory_failure() function, and then rename __memory_failure() without the leading "__". Provide clearer message when action optional memory errors are ignored. Acked-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Tony Luck <tony.luck@intel.com> |