The implementation is adopted from the ARM arch. GCC 7.3, 8 or newer is
required for building the xtensa kernel with SSP.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Remove duplicate definitions of EX() and similar TRY/CATCH and SRC/DST
macros from assembly sources and put single definition into asm/asmmacro.h
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that xtensa assembly sources are compiled with -mlongcalls let the
assembler and linker relax call instructions into l32r + callx where
needed. This change makes the code cleaner and potentially a bit faster.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
vmlinux.lds.S doesn't do anything special with literals, so instead of
keeping them separate put them into the corresponding text sections.
Drop explicit .literal sections from the vmlinux.lds.S, use standard
section macros. Mark literal pool locations in the assembly sources.
Unfortunately assembler doesn't put literals into .init sections and
external libgcc may still have .literal sections, so sed transformation
to the linker script is still needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use tracehook_report_syscall_{entry,exit} instead of a local copy of it
in do_syscall_trace. Allow tracehook to cancel syscall by returning
invalid syscall number to the system_call function.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Pull uaccess.h prepwork from Al Viro:
"Preparations to tree-wide switch to use of linux/uaccess.h (which,
obviously, will allow to start unifying stuff for real). The last step
there, ie
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
`git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`
is not taken here - I would prefer to do it once just before or just
after -rc1. However, everything should be ready for it"
* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove a stray reference to asm/uaccess.h in docs
sparc64: separate extable_64.h, switch elf_64.h to it
score: separate extable.h, switch module.h to it
mips: separate extable.h, switch module.h to it
x86: separate extable.h, switch sections.h to it
remove stray include of asm/uaccess.h from cacheflush.h
mn10300: remove a bogus processor.h->uaccess.h include
xtensa: split uaccess.h into C and asm sides
bonding: quit messing with IOCTL
kill __kernel_ds_p off
mn10300: finish verify_area() off
frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
exceptions: detritus removal
Make kernel load address explicit, independent of the selected MMU
configuration and configurable from Kconfig. Do not restrict it to the
first 512MB of the physical address space.
Cleanup kernel memory layout macros:
- rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR;
- drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS;
- introduce PHYS_OFFSET and use it in __va and __pa definitions;
- synchronize MMU/noMMU vectors, drop unused NMI vector;
- replace hardcoded vectors offset of 0x3000 with Kconfig symbol.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use perf framework to manage hardware instruction and data breakpoints.
Add two new ptrace calls: PTRACE_GETHBPREGS and PTRACE_SETHBPREGS to
query and set instruction and data breakpoints.
Address bit 0 choose instruction (0) or data (1) break register, bits
31..1 are the register number.
Both calls transfer two 32-bit words: address (0) and control (1).
Instruction breakpoint contorl word is 0 to clear breakpoint, 1 to set.
Data breakpoint control word bit 31 is 'trigger on store', bit 30 is
'trigger on load, bits 29..0 are length. Length 0 is used to clear a
breakpoint. To set a breakpoint length must be a power of 2 in the range
1..64 and the address must be length-aligned.
Introduce new thread_info flag: TIF_DB_DISABLED. Set it if debug
exception is raised by the kernel code accessing watched userspace
address and disable corresponding data breakpoint. On exit to userspace
check that flag and, if set, restore all data breakpoints.
Handle debug exceptions raised with PS.EXCM set. This may happen when
window overflow/underflow handler or fast exception handler hits data
breakpoint, in which case save and disable all data breakpoints,
single-step faulting instruction and restore data breakpoints.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
With implementation of data breakpoints debug exceptions raised when
PS.EXCM is set need to be handled, e.g. window overflow code can write
to watched userspace address. Currently debug exception handler uses
EXCSAVE and DEPC SRs to save temporary registers, but DEPC may not be
available when PS.EXCM is set and more space will be needed to save
additional state.
Reorganize debug context: create per-CPU structure debug_table instance
and store its address in the EXCSAVE<debug level> instead of
debug_exception function address. Expand this structure when more save
space is needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Build-time fixes:
- make lbeg/lend/lcount save/restore conditional on kernel entry;
- don't clear lcount in platform_restart functions unconditionally.
Run-time fixes:
- use correct end of range register in __endla paired with __loopt, not
the unused temporary register. This fixes .bss zero-initialization.
Update comments in asmmacro.h;
- don't clobber a10 in the usercopy that leads to access to unmapped
memory.
Cc: <stable@vger.kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In case perf IRQ is the highest of the medium-level IRQs, and is alone
on its level, it may be treated as NMI:
- LOCKLEVEL is defined to be one level less than EXCM level,
- IRQ masking never lowers current IRQ level,
- new fake exception cause code, EXCCAUSE_MAPPED_NMI is assigned to that
IRQ; new second level exception handler, do_nmi, assigned to it
handles it as NMI,
- atomic operations in configurations without s32c1i still need to mask
all interrupts.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There's no way _switch_to can produce double exceptions now, don't
enter/leave EXC_TABLE_FIXUP critical section.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
call12 can't be safely used as the first call in the inline function,
because the compiler does not extend the stack frame of the bounding
function accordingly, which may result in corruption of local variables.
If a call needs to be done, do call8 first followed by call12.
For pure assembly code in _switch_to increase stack frame size of the
bounding function.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
entry.s only disables IRQs on hardware IRQ, move trace_hardirqs_off call
into do_interrupt. Check actual intlevel that will be restored on return
from exception handler to decide if trace_hardirqs_on should be called.
Annotate IRQ on/off points in the TIF_* handling loop on return from
exception handler.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Restore original a0 in the kernel exception stack frame. This way it
looks like the frame that got interrupt/exception did alloca (copy a0 and
a1 spilled under old stack to the new location as well) to save registers
and then did a call to handler.
The point where interrupt/exception was taken is not in the stack chain,
only in pt_regs (call4 from that address can be simulated to keep it in
the stack trace).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Userspace return code may skip restoring THREADPTR register if there are
no registers that need to be zeroed. This leads to spurious failures in
libc NPTL tests.
Always restore THREADPTR on return to userspace.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
These syscalls are not used by userspace tools for some time now, and
they have issues when called with invalid arguments. It's not worth
changing signal delivery mechanism as we don't expect any new users for
these syscalls. Let's keep them for backwards compatibility under #ifdef,
disabled by default.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Remove restoring a6 on some return paths and instead modify and restore
it in a single place, using symbolic name.
Correctly restore a7 from PT_AREG7 in case of illegal a6 value.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Current definition of TLBTEMP_BASE_2 is always 32K above the
TLBTEMP_BASE_1, whereas fast_second_level_miss handler for the TLBTEMP
region analyzes virtual address bit (PAGE_SHIFT + DCACHE_ALIAS_ORDER)
to determine TLBTEMP region where the fault happened. The size of the
TLBTEMP region is also checked incorrectly: not 64K, but twice data
cache way size (whicht may as well be less than the instruction cache
way size).
Fix TLBTEMP_BASE_2 to be TLBTEMP_BASE_1 + data cache way size.
Provide TLBTEMP_SIZE that is a greater of doubled data cache way size or
the instruction cache way size, and use it to determine if the second
level TLB miss occured in the TLBTEMP region.
Practical occurence of page faults in the TLBTEMP area is extremely
rare, this code can be tested by deletion of all w[di]tlb instructions
in the tlbtemp_mapping region.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
With SMP and a lot of debug options enabled task_struct::thread gets out
of reach of s32i/l32i instructions with base pointing at task_struct,
breaking build with the following messages:
arch/xtensa/kernel/entry.S: Assembler messages:
arch/xtensa/kernel/entry.S:1002: Error: operand 3 of 'l32i.n' has invalid value '1048'
arch/xtensa/kernel/entry.S:1831: Error: operand 3 of 's32i.n' has invalid value '1040'
arch/xtensa/kernel/entry.S:1832: Error: operand 3 of 's32i.n' has invalid value '1044'
Change base to point to task_struct::thread in such cases.
Don't use a10 in _switch_to to save/restore prev pointer as a2 is not
clobbered.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The original implementation could clobber registers under certain conditions.
The Xtensa processor architecture uses windowed registers and the original
implementation was using a4 as a temporary register, which under certain
conditions could be register a0 of the oldest window frame, and didn't always
restore the content correctly.
By moving the _spill_registers routine inside the fast system call, it frees
up one more register (the return address is not required anymore) for the
spill routine.
Signed-off-by: Chris Zankel <chris@zankel.net>
We need it saved because it contains a3 where we track which register
windows we still need to spill, and fixup handler may call C exception
handlers. Also fix comments.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Most in-kernel users want registers spilled on the kernel stack and
don't require PS.EXCM to be set. That means that they don't need fixup
routine and could reuse regular window overflow mechanism for that,
which makes spill routine very simple.
Cc: stable@vger.kernel.org
Suggested-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
fast_syscall_spill_registers_fixup was not correctly updated by the
'keep a3 and excsave1 on entry to exception handlers' patch: it doesn't
preserve a3 that it gets on entry, breaking _spill_registers in case of
page fault on stack during register spilling, leading to unhandled
exception in kernel mode.
Preserve a3 by saving it in the original _spill_registers stack frame's
a3 during exception handling and restoring it afterwards.
Also fix comments and function bounds annotations.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Chris Zankel <chris@zankel.net>
Instead of emulating movsp instruction in the kernel use window
underflow handler to load missing register window and retry failed
movsp.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Based on the SMP patch by Joe Taylor and subsequent fixes.
Preserve exception table pointer (normally stored in excsave1 SR) as it
cannot be easily restored in SMP environment.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Check pending signals and rescheduling thread flags with interrupts
disabled, and don't enable them if no flags are set. Call
trace_hardirqs_on after thread flags handling, so that rescheduling is
done and hardirqs tracking flag is updated in the correct task context.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
- check that user TLB mappings correspond to the current page table;
- check that TLB mapping VPN is in the kernel/user address range
in accordance with its ASID.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Before _PAGE_WRITABLE_BIT test fast_store_prohibited must make sure that
PTE is present. Otherwise 'writable' bit is undefined and may be reused
in the 'file offset' or 'swap type' PTE fields.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
IRQ handlers are expected to run with IRQs disabled.
See e.g. http://lwn.net/Articles/380931/ for a longer story.
This was overlooked in the commit
2d1c645 xtensa: dispatch medium-priority interrupts
Revert to old behavior and simplify interrupt entry and exit code.
Interrupt handler still honours IRQ priority.
do_notify_resume/schedule must be called with interrupts enabled, enable
interrupts if we return from user exception.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
The Xtensa architecture provides a global register called THREADPTR
for the purpose of Thread Local Storage (TLS) support. This allows us
to use a fairly simple implementation, keeping the thread pointer in
the regset and simply saving and restoring it upon entering/exiting
the from user space.
Signed-off-by: Chris Zankel <chris@zankel.net>
Support call graph profiling.
Keep upper two bits of PC unchanged through backtrace rather than take
them from sp (a1). The stack pointer is usually in the same GB (same
upper 2 bits) as PC, but technically doesn't always have to be (and
might not in the future, when taking full advantage of MMU v3).
Signed-off-by: Dan Nicolaescu <dann@xtensa-linux.org>
Signed-off-by: Pete Delaney <piet@tensilica.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Add support for dispatching medium-priority interrupts, that is,
interrupts of priority levels 2 to EXCM_LEVEL. IRQ handling may be
preempted by higher priority IRQ.
Signed-off-by: Marc Gauthier <marc@tensilica.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Remove heading and trailing spaces, trim trailing lines, and wrap lines
that are longer than 80 characters.
Signed-off-by: Chris Zankel <chris@zankel.net>
Although scompare1 may be saved/restored by xchal_ncp_{load,store}
macros, explicit save/restore of registers manipulated by the kernel
itself is considered more correct.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
Fix two compiler warnings complaining about truncating a value on
a 64-bit host, and about declaring an unused variable that is only
used for a specific configuration.
Signed-off-by: Chris Zankel <chris@zankel.net>
- reference SRs by names where possible, not by numbers;
- get rid of __stringify around SR names where possible;
- remove unneeded SR names from asm/regs.h;
- add SREG_ prefix to remaining SR names;
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
The linker script was including assembly macros from the coprocessor
header file that is not otherwise used by the script.
Signed-off-by: Chris Zankel <chris@zankel.net>
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move all header files for xtensa to arch/xtensa/include and platform and
variant header files to the appropriate arch/xtensa/platforms/ and
arch/xtensa/variants/ directories.
Moving the files gets also rid of all uses of symlinks in the Makefile.
This has been completed already for the majority of the architectures
and xtensa is one out of six missing.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
Max Filippov