A customer noticed RX path hang when MTU is changed on the fly while
running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720
belongs to same ASIC family, we observed same issue and same fix
could solve this problem for 5720.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of AMD based server with 5762 hangs with jumbo frame traffic.
This AMD platform has southbridge limitation which is restricting MRRS
to 4000. As a work around, driver to restricts the MRRS to 2048 for
this particular 5762 NX1 card.
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2017-12-22
1) Check for valid id proto in validate_tmpl(), otherwise
we may trigger a warning in xfrm_state_fini().
From Cong Wang.
2) Fix a typo on XFRMA_OUTPUT_MARK policy attribute.
From Michal Kubecek.
3) Verify the state is valid when encap_type < 0,
otherwise we may crash on IPsec GRO .
From Aviv Heller.
4) Fix stack-out-of-bounds read on socket policy lookup.
We access the flowi of the wrong address family in the
IPv4 mapped IPv6 case, fix this by catching address
family missmatches before we do the lookup.
5) fix xfrm_do_migrate() with AEAD to copy the geniv
field too. Otherwise the state is not fully initialized
and migration fails. From Antony Antony.
6) Fix stack-out-of-bounds with misconfigured transport
mode policies. Our policy template validation is not
strict enough. It is possible to configure policies
with transport mode template where the address family
of the template does not match the selectors address
family. Fix this by refusing such a configuration,
address family can not change on transport mode.
7) Fix a policy reference leak when reusing pcpu xdst
entry. From Florian Westphal.
8) Reinject transport-mode packets through tasklet,
otherwise it is possible to reate a recursion
loop. From Herbert Xu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The enet IP only support 32 bit, it will use swiotlb buffer to do dma
mapping when xmit buffer DMA memory address is bigger than 4G in i.MX
platform. After stress suspend/resume test, it will print out:
log:
[12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes)
[12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet
[12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed
The issue is that the ready xmit buffers that are dma mapped but DMA still
don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped.
So it should check the dma mapping buffer and unmap them.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix memory leak in tipc_enable_bearer() if enable_media() fails, and
cleanup with bearer_disable() if tipc_mon_create() fails.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS currently doesn't check if the length of the control message is
large enough to hold the required data, before dereferencing the control
message data. This results in following crash:
BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013
[inline]
BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90
net/rds/send.c:1066
Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157
CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
rds_rdma_bytes net/rds/send.c:1013 [inline]
rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066
sock_sendmsg_nosec net/socket.c:628 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:638
___sys_sendmsg+0x320/0x8b0 net/socket.c:2018
__sys_sendmmsg+0x1ee/0x620 net/socket.c:2108
SYSC_sendmmsg net/socket.c:2139 [inline]
SyS_sendmmsg+0x35/0x60 net/socket.c:2134
entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x43fe49
RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49
RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0
R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000
To fix this, we verify that the cmsg_len is large enough to hold the
data to be read, before proceeding further.
Reported-by: syzbot <syzkaller-bugs@googlegroups.com>
Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using a preprocessor directive to check for CONFIG_IPV6 in the middle of
a DECLARE_EVENT_CLASS macro's arg list causes sparse to report a series
of errors:
./include/trace/events/tcp.h:68:1: error: directive in argument list
./include/trace/events/tcp.h:75:1: error: directive in argument list
./include/trace/events/tcp.h:144:1: error: directive in argument list
./include/trace/events/tcp.h:151:1: error: directive in argument list
./include/trace/events/tcp.h:216:1: error: directive in argument list
./include/trace/events/tcp.h:223:1: error: directive in argument list
./include/trace/events/tcp.h:274:1: error: directive in argument list
./include/trace/events/tcp.h:281:1: error: directive in argument list
Once sparse finds an error, it stops printing warnings for the file it
is checking. This masks any sparse warnings that would normally be
reported for the core TCP code.
Instead, handle the preprocessor conditionals in a couple of auxiliary
macros. This also has the benefit of reducing duplicate code.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a group member receives a member WITHDRAW event, this might have
two reasons: either the peer member is leaving the group, or the link
to the member's node has been lost.
In the latter case we need to issue a DOWN event to the user right away,
and let function tipc_group_filter_msg() perform delete of the member
item. However, in this case we miss to change the state of the member
item to MBR_LEAVING, so the member item is not deleted, and we have a
memory leak.
We now separate better between the four sub-cases of a WITHRAW event
and make sure that each case is handled correctly.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to check block for being null in both tcf_block_put and
tcf_block_put_ext.
Fixes: 343723dd51 ("net: sched: fix clsact init error path")
Reported-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 2f487712b8 ("tipc: guarantee that group broadcast doesn't
bypass group unicast") we introduced a mechanism that requires the first
(replicated) broadcast sent after a unicast to be acknowledged by all
receivers before permitting sending of the next (true) broadcast.
The counter for keeping track of the number of acknowledges to expect
is based on the tipc_group::member_cnt variable. But this misses that
some of the known members may not be ready for reception, and will never
acknowledge the message, either because they haven't fully joined the
group or because they are leaving the group. Such members are identified
by not fulfilling the condition tested for in the function
tipc_group_is_enabled().
We now set the counter for the actual number of acks to receive at the
moment the message is sent, by just counting the number of recipients
satisfying the tipc_group_is_enabled() test.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rcu_barrier_bh() in mini_qdisc_pair_swap() is to wait for
flying RCU callback installed by a previous mini_qdisc_pair_swap(),
however we miss it on the tp_head==NULL path, which leads to that
the RCU callback still uses miniq_old->rcu after it is freed together
with qdisc in qdisc_graft(). So just add it on that path too.
Fixes: 46209401f8 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath ")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Under some circumstances driver will perform PHY reset in
ksz9031_read_status() to fix autoneg failure case (idle error count =
0xFF). When this happens ksz9031 will not detect link status change any
more when connecting to Netgear 1G switch (link can be recovered sometimes by
restarting netdevice "ifconfig down up"). Reproduced with TI am572x board
equipped with ksz9031 PHY while connecting to Netgear 1G switch.
Fix the issue by reconfiguring autonegotiation after PHY reset in
ksz9031_read_status().
Fixes: d2fd719bcb ("net/phy: micrel: Add workaround for bad autoneg")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ip6gre is created using ioctl, its features, such as
scatter-gather, GSO and tx-checksumming will be turned off:
# ip -f inet6 tunnel add gre6 mode ip6gre remote fd00::1
# ethtool -k gre6 (truncated output)
tx-checksumming: off
scatter-gather: off
tcp-segmentation-offload: off
generic-segmentation-offload: off [requested on]
But when netlink is used, they will be enabled:
# ip link add gre6 type ip6gre remote fd00::1
# ethtool -k gre6 (truncated output)
tx-checksumming: on
scatter-gather: on
tcp-segmentation-offload: on
generic-segmentation-offload: on
This results in a loss of performance when gre6 is created via ioctl.
The issue was found with LTP/gre tests.
Fix it by moving the setup of device features to a separate function
and invoke it with ndo_init callback because both netlink and ioctl
will eventually call it via register_netdevice():
register_netdevice()
- ndo_init() callback -> ip6gre_tunnel_init() or ip6gre_tap_init()
- ip6gre_tunnel_init_common()
- ip6gre_tnl_init_features()
The moved code also contains two minor style fixes:
* removed needless tab from GRE6_FEATURES on NETIF_F_HIGHDMA line.
* fixed the issue reported by checkpatch: "Unnecessary parentheses around
'nt->encap.type == TUNNEL_ENCAP_NONE'"
Fixes: ac4eb009e4 ("ip6gre: Add support for basic offloads offloads excluding GSO")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that we mark AN as enabled at boot time, rather than leaving
it disabled. This is noticable if your SFP module is fiber, and
it supports faster speeds than 1G with 2.5G support in place.
Fixes: 9525ae8395 ("phylink: add phylink infrastructure")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting the ethtool settings, ensure that the validated PHY
interface mode is propagated to the current link settings, so that
2500BaseX can be selected.
Fixes: 9525ae8395 ("phylink: add phylink infrastructure")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller"
"What's a holiday weekend without some networking bug fixes? [1]
1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function
calls, from Daniel Borkmann.
2) Fix regression from errata limiting change to marvell PHY driver,
from Zhao Qiang.
3) Fix u16 overflow in SCTP, from Xin Long.
4) Fix potential memory leak during bridge newlink, from Nikolay
Aleksandrov.
5) Fix BPF selftest build on s390, from Hendrik Brueckner.
6) Don't append to cfg80211 automatically generated certs file,
always write new ones from scratch. From Thierry Reding.
7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai.
8) Fix hang on tg3 MTU change with certain chips, from Brian King.
9) Add stall detection to arc emac driver and reset chip when this
happens, from Alexander Kochetkov.
10) Fix MTU limitng in GRE tunnel drivers, from Xin Long.
11) Fix stmmac timestamping bug due to mis-shifting of field. From
Fredrik Hallenberg.
12) Fix metrics match when deleting an ipv4 route. The kernel sets
some internal metrics bits which the user isn't going to set when
it makes the delete request. From Phil Sutter.
13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix
from Yelena Krivosheev.
14) Fix double free and memory corruption in get_net_ns_by_id, from
Eric W. Biederman.
15) Flush ipv4 FIB tables in the reverse order. Some tables can share
their actual backing data, in particular this happens for the MAIN
and LOCAL tables. We have to kill the LOCAL table first, because
it uses MAIN's backing memory. Fix from Ido Schimmel.
16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann
Horn, and Alexei Starovoitov.
17) Make changes to ipv6 autoflowlabel sysctl really propagate to
sockets, unless the socket has set the per-socket value
explicitly. From Shaohua Li.
18) Fix leaks and double callback invocations of zerocopy SKBs, from
Willem de Bruijn"
[1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
skbuff: skb_copy_ubufs must release uarg even without user frags
skbuff: orphan frags before zerocopy clone
net: reevalulate autoflowlabel setting after sysctl setting
openvswitch: Fix pop_vlan action for double tagged frames
ipv6: Honor specified parameters in fibmatch lookup
bpf: do not allow root to mangle valid pointers
selftests/bpf: add tests for recent bugfixes
bpf: fix integer overflows
bpf: don't prune branches when a scalar is replaced with a pointer
bpf: force strict alignment checks for stack pointers
bpf: fix missing error return in check_stack_boundary()
bpf: fix 32-bit ALU op verification
bpf: fix incorrect tracking of register size truncation
bpf: fix incorrect sign extension in check_alu_op()
bpf/verifier: fix bounds calculation on BPF_RSH
ipv4: Fix use-after-free when flushing FIB tables
s390/qeth: fix error handling in checksum cmd callback
tipc: remove joining group member from congested list
selftests: net: Adding config fragment CONFIG_NUMA=y
nfp: bpf: keep track of the offloaded program
...
Saeed Mahameed says:
===================
Mellanox, mlx5 fixes 2017-12-19
The follwoing series includes some fixes for mlx5 core and etherent
driver.
Please pull and let me know if there is any problem.
This series doesn't introduce any conflict with the ongoing mlx5 for-next
submission.
For -stable:
kernels >= v4.7.y
("net/mlx5e: Fix possible deadlock of VXLAN lock")
("net/mlx5e: Add refcount to VXLAN structure")
("net/mlx5e: Prevent possible races in VXLAN control flow")
("net/mlx5e: Fix features check of IPv6 traffic")
kernels >= v4.9.y
("net/mlx5: Fix error flow in CREATE_QP command")
("net/mlx5: Fix rate limit packet pacing naming and struct")
kernels >= v4.13.y
("net/mlx5: FPGA, return -EINVAL if size is zero")
kernels >= v4.14.y
("Revert "mlx5: move affinity hints assignments to generic code")
All above patches apply and compile with no issues on corresponding -stable.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_copy_ubufs creates a private copy of frags[] to release its hold
on user frags, then calls uarg->callback to notify the owner.
Call uarg->callback even when no frags exist. This edge case can
happen when zerocopy_sg_from_iter finds enough room in skb_headlen
to copy all the data.
Fixes: 3ece782693 ("sock: skb_copy_ubufs support for compound pages")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate
calls to skb_uarg(skb)->callback for the same data.
skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb
with each segment. This is only safe for uargs that do refcounting,
which is those that pass skb_orphan_frags without dropping their
shared frags. For others, skb_orphan_frags drops the user frags and
sets the uarg to NULL, after which sock_zerocopy_clone has no effect.
Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback
calls for the same data causing the vhost_net_ubuf_ref_>refcount to
drop below zero.
Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com>
Fixes: 1f8b977ab3 ("sock: enable MSG_ZEROCOPY")
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Reported-by: David Hill <dhill@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block fixes from Jens Axboe:
"It's been a few weeks, so here's a small collection of fixes that
should go into the current series.
This contains:
- NVMe pull request from Christoph, with a few important fixes.
- kyber hang fix from Omar.
- A blk-throttl fix from Shaohua, fixing a case where we double
charge a bio.
- Two call_single_data alignment fixes from me, fixing up some
unfortunate changes that went into 4.14 without being properly
reviewed on the block side (since nobody was CC'ed on the
patch...).
- A bounce buffer fix in two parts, one from me and one from Ming.
- Revert bdi debug error handling patch. It's causing boot issues for
some folks, and a week down the line, we're still no closer to a
fix. Revert this patch for now until it's figured out, then we can
retry for 4.16"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "bdi: add error handle for bdi_debug_register"
null_blk: unalign call_single_data
block: unalign call_single_data in struct request
block-throttle: avoid double charge
block: fix blk_rq_append_bio
block: don't let passthrough IO go into .make_request_fn()
nvme: setup streams after initializing namespace head
nvme: check hw sectors before setting chunk sectors
nvme: call blk_integrity_unregister after queue is cleaned up
nvme-fc: remove double put reference if admin connect fails
nvme: set discard_alignment to zero
kyber: fix another domain token wait queue hang
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJaO6N9AAoJEL/70l94x66DC1wH/Rf+u0Cj6ZQil6LK6Nf8bfPd
3TqrwrxUDeXwi8GzsvK14izBr1mDzidSHIO0Q4XINFRSRdaf43h3R2im/SJqvNhP
xktCmJI2CxN96oaC7kIExgwf3YKhFdLIADfbT8oR9p3xZG/+c97dkr3b4XtmVCDb
ZXdUEOcKnoW4zwpfJN30FLlq4OwYvuYVz02AEfPivZRDfhhus/TYSnuSdxH8CLNf
75ymuKyXoo/RELbimwbMk8Cm9+ey7PjlUGOgbnbXIFtmgznXhLzAOeES2B+46J5b
sMBPlmiJrn6N//lM18CC5yOBzBLGsYOoXggtw4aU/5nM4GVcFebWedpcoD4D8Jw=
=Bt8w
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- A bug in handling of SPE state for non-vhe systems
- A fix for a crash on system shutdown
- Three timer fixes, introduced by the timer optimizations for v4.15
x86 fixes:
- fix for a WARN that was introduced in 4.15
- fix for SMM when guest uses PCID
- fixes for several bugs found by syzkaller
... and a dozen papercut fixes for the kvm_stat tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
tools/kvm_stat: sort '-f help' output
kvm: x86: fix RSM when PCID is non-zero
KVM: Fix stack-out-of-bounds read in write_mmio
KVM: arm/arm64: Fix timer enable flow
KVM: arm/arm64: Properly handle arch-timer IRQs after vtimer_save_state
KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GIC
KVM: arm/arm64: Fix HYP unmapping going off limits
arm64: kvm: Prevent restoring stale PMSCR_EL1 for vcpu
KVM/x86: Check input paging mode when cs.l is set
tools/kvm_stat: add line for totals
tools/kvm_stat: stop ignoring unhandled arguments
tools/kvm_stat: suppress usage information on command line errors
tools/kvm_stat: handle invalid regular expressions
tools/kvm_stat: add hint on '-f help' to man page
tools/kvm_stat: fix child trace events accounting
tools/kvm_stat: fix extra handling of 'help' with fields filter
tools/kvm_stat: fix missing field update after filter change
tools/kvm_stat: fix drilldown in events-by-guests mode
tools/kvm_stat: fix command line option '-g'
kvm: x86: fix WARN due to uninitialized guest FPU state
...
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2.
If sockopt doesn't set autoflowlabel, outcome packets from the hosts are
supposed to not include flowlabel. This is true for normal packet, but
not for reset packet.
The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if
we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't
changed, so the sock will keep the old behavior in terms of auto
flowlabel. Reset packet is suffering from this problem, because reset
packet is sent from a special control socket, which is created at boot
time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control
socket will always have its ipv6_pinfo.autoflowlabel set, even after
user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always
have flowlabel. Normal sock created before sysctl setting suffers from
the same issue. We can't even turn off autoflowlabel unless we kill all
socks in the hosts.
To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the
autoflowlabel setting from user, otherwise we always call
ip6_default_np_autolabel() which has the new settings of sysctl.
Note, this changes behavior a little bit. Before commit 42240901f7
(ipv6: Implement different admin modes for automatic flow labels), the
autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes,
existing connection will change autoflowlabel behavior. After that
commit, autoflowlabel behavior is sticky in the whole life of the sock.
With this patch, the behavior isn't sticky again.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_vlan_pop() expects skb->protocol to be a valid TPID for double
tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop()
shift the true ethertype into position for us.
Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets")
Signed-off-by: Eric Garver <e@erig.me>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit a0747a859e.
It breaks some booting for some users, and more than a week
into this, there's still no good fix. Revert this commit
for now until a solution has been found.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, parameters such as oif and source address are not taken into
account during fibmatch lookup. Example (IPv4 for reference) before
patch:
$ ip -4 route show
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1
$ ip -6 route show
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium
fe80::/64 dev dummy0 proto kernel metric 256 pref medium
fe80::/64 dev dummy1 proto kernel metric 256 pref medium
$ ip -4 route get fibmatch 192.0.2.2 oif dummy0
192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1
$ ip -4 route get fibmatch 192.0.2.2 oif dummy1
RTNETLINK answers: No route to host
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
After:
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0
2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium
$ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1
RTNETLINK answers: Network is unreachable
The problem stems from the fact that the necessary route lookup flags
are not set based on these parameters.
Instead of duplicating the same logic for fibmatch, we can simply
resolve the original route from its copy and dump it instead.
Fixes: 18c3a61c42 ("net: ipv6: RTM_GETROUTE: return matched fib result when requested")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sort the fields returned by specifying '-f help' on the command line.
While at it, simplify the code a bit, indent the output and eliminate an
extra blank line at the beginning.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then
CR4 & ~PCIDE, then CR0, then CR4.
However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier
in the long run to replace rsm_enter_protected_mode() with an emulator
callback that sets all the special registers (like KVM_SET_SREGS would
do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Fixes: 660a5d517a
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-21
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix multiple security issues in the BPF verifier mostly related
to the value and min/max bounds tracking rework in 4.14. Issues
range from incorrect bounds calculation in some BPF_RSH cases,
to improper sign extension and reg size handling on 32 bit
ALU ops, missing strict alignment checks on stack pointers, and
several others that got fixed, from Jann, Alexei and Edward.
2) Fix various build failures in BPF selftests on sparc64. More
specifically, librt needed to be added to the libs to link
against and few format string fixups for sizeof, from David.
3) Fix one last remaining issue from BPF selftest build that was
still occuring on s390x from the asm/bpf_perf_event.h include
which could not find the asm/ptrace.h copy, from Hendrik.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not allow root to convert valid pointers into unknown scalars.
In particular disallow:
ptr &= reg
ptr <<= reg
ptr += ptr
and explicitly allow:
ptr -= ptr
since pkt_end - pkt == length
1.
This minimizes amount of address leaks root can do.
In the future may need to further tighten the leaks with kptr_restrict.
2.
If program has such pointer math it's likely a user mistake and
when verifier complains about it right away instead of many instructions
later on invalid memory access it's easier for users to fix their progs.
3.
when register holding a pointer cannot change to scalar it allows JITs to
optimize better. Like 32-bit archs could use single register for pointers
instead of a pair required to hold 64-bit scalars.
4.
reduces architecture dependent behavior. Since code:
r1 = r10;
r1 &= 0xff;
if (r1 ...)
will behave differently arm64 vs x64 and offloaded vs native.
A significant chunk of ptr mangling was allowed by
commit f1174f77b5 ("bpf/verifier: rework value tracking")
yet some of it was allowed even earlier.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexei Starovoitov says:
====================
This patch set addresses a set of security vulnerabilities
in bpf verifier logic discovered by Jann Horn.
All of the patches are candidates for 4.14 stable.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
These tests should cover the following cases:
- MOV with both zero-extended and sign-extended immediates
- implicit truncation of register contents via ALU32/MOV32
- implicit 32-bit truncation of ALU32 output
- oversized register source operand for ALU32 shift
- right-shift of a number that could be positive or negative
- map access where adding the operation size to the offset causes signed
32-bit overflow
- direct stack access at a ~4GiB offset
Also remove the F_LOAD_WITH_STRICT_ALIGNMENT flag from a bunch of tests
that should fail independent of what flags userspace passes.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There were various issues related to the limited size of integers used in
the verifier:
- `off + size` overflow in __check_map_access()
- `off + reg->off` overflow in check_mem_access()
- `off + reg->var_off.value` overflow or 32-bit truncation of
`reg->var_off.value` in check_mem_access()
- 32-bit truncation in check_stack_boundary()
Make sure that any integer math cannot overflow by not allowing
pointer math with large values.
Also reduce the scope of "scalar op scalar" tracking.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This could be made safe by passing through a reference to env and checking
for env->allow_ptr_leaks, but it would only work one way and is probably
not worth the hassle - not doing it will not directly lead to program
rejection.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Force strict alignment checks for stack pointers because the tracking of
stack spills relies on it; unaligned stack accesses can lead to corruption
of spilled registers, which is exploitable.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
32-bit ALU ops operate on 32-bit values and have 32-bit outputs.
Adjust the verifier accordingly.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Properly handle register truncation to a smaller size.
The old code first mirrors the clearing of the high 32 bits in the bitwise
tristate representation, which is correct. But then, it computes the new
arithmetic bounds as the intersection between the old arithmetic bounds and
the bounds resulting from the bitwise tristate representation. Therefore,
when coerce_reg_to_32() is called on a number with bounds
[0xffff'fff8, 0x1'0000'0007], the verifier computes
[0xffff'fff8, 0xffff'ffff] as bounds of the truncated number.
This is incorrect: The truncated number could also be in the range [0, 7],
and no meaningful arithmetic bounds can be computed in that case apart from
the obvious [0, 0xffff'ffff].
Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.
Debian assigned CVE-2017-16996 for this issue.
v2:
- flip the mask during arithmetic bounds calculation (Ben Hutchings)
v3:
- add CVE number (Ben Hutchings)
Fixes: b03c9f9fdc ("bpf/verifier: track signed and unsigned min/max values")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Distinguish between
BPF_ALU64|BPF_MOV|BPF_K (load 32-bit immediate, sign-extended to 64-bit)
and BPF_ALU|BPF_MOV|BPF_K (load 32-bit immediate, zero-padded to 64-bit);
only perform sign extension in the first case.
Starting with v4.14, this is exploitable by unprivileged users as long as
the unprivileged_bpf_disabled sysctl isn't set.
Debian assigned CVE-2017-16995 for this issue.
v3:
- add CVE number (Ben Hutchings)
Fixes: 484611357c ("bpf: allow access into map value arrays")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Incorrect signed bounds were being computed.
If the old upper signed bound was positive and the old lower signed bound was
negative, this could cause the new upper signed bound to be too low,
leading to security issues.
Fixes: b03c9f9fdc ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[jannh@google.com: changed description to reflect bug impact]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Two simple fixes: one for sparse warnings that were introduced by the
merge window conversion to blist_flags_t and the other to fix dropped
I/O during reset in aacraid.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IuyM
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two simple fixes: one for sparse warnings that were introduced by the
merge window conversion to blist_flags_t and the other to fix dropped
I/O during reset in aacraid"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aacraid: Fix I/O drop during reset
scsi: core: Use blist_flags_t consistently
Pull ARM fix from Russell King:
"Just one fix for a problem in the csum_partial_copy_from_user()
implementation when software PAN is enabled"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch
- Fix an error handling issue in the ACPI APEI implementation
of the >read callback in struct pstore_info (Takashi Iwai).
- Fix a possible out-of-bounds arrar read in the ACPI CPPC
driver (Colin Ian King).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=jLX/
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recently introduced issue in the ACPI CPPC driver and an
obscure error hanling bug in the APEI code.
Specifics:
- Fix an error handling issue in the ACPI APEI implementation of the
>read callback in struct pstore_info (Takashi Iwai).
- Fix a possible out-of-bounds arrar read in the ACPI CPPC driver
(Colin Ian King)"
* tag 'acpi-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: APEI / ERST: Fix missing error handling in erst_reader()
ACPI: CPPC: remove initial assignment of pcc_ss_data
- Fix an issue in the PCI handling of the "thaw" transition during
hibernation (after creating an image), introduced by a bug fix
from the 4.13 cycle and exposed by recent changes in the IRQ
subsystem, that caused pci_restore_state() to be called for
devices in low-power states in some cases which is incorrect
and breaks MSI management on some systems (Rafael Wysocki).
- Fix a recent regression in the imx6q cpufreq driver that broke
speed grading on i.MX6 QuadPlus by omitting checks causing
invalid operating performance points (OPPs) to be disabled on
that SoC as appropriate (Lucas Stach).
- Fix a regression introduced during the 4.14 cycle in the ondemand
and conservative cpufreq governors that causes the sampling
interval used by them to be shorter than the tick period in some
cases which leads to incorrect decisions (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=fTB6
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a regression in the ondemand and conservative cpufreq
governors that was introduced during the 4.13 cycle, a recent
regression in the imx6q cpufreq driver and a regression in the PCI
handling of hibernation from the 4.14 cycle.
Specifics:
- Fix an issue in the PCI handling of the "thaw" transition during
hibernation (after creating an image), introduced by a bug fix from
the 4.13 cycle and exposed by recent changes in the IRQ subsystem,
that caused pci_restore_state() to be called for devices in
low-power states in some cases which is incorrect and breaks MSI
management on some systems (Rafael Wysocki).
- Fix a recent regression in the imx6q cpufreq driver that broke
speed grading on i.MX6 QuadPlus by omitting checks causing invalid
operating performance points (OPPs) to be disabled on that SoC as
appropriate (Lucas Stach).
- Fix a regression introduced during the 4.14 cycle in the ondemand
and conservative cpufreq governors that causes the sampling
interval used by them to be shorter than the tick period in some
cases which leads to incorrect decisions (Rafael Wysocki)"
* tag 'pm-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: governor: Ensure sufficiently large sampling intervals
cpufreq: imx6q: fix speed grading regression on i.MX6 QuadPlus
PCI / PM: Force devices to D0 in pci_pm_thaw_noirq()
A bunch of really small fixes here, all driver specific and mostly in
error handling and remove paths. The most important fixes are for the
a3700 clock configuration and a fix for a nasty stall which could
potentially cause data corruption with the xilinx driver.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlo6kgoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KGDB/4sweNiUfktOAN1Y86bRmyrTvJctCCY
MAOAzDxvKjUuYEoq0LZWKEt0uIXM5+cB+YrghEn6e5lwdB0rRsifzRQ5D2iR8odf
xhxOW4uV2+RhCDiPWnKP7cOiOxahYPSBw1RNHsAhXlcT11rRQC1QMwpWLE0ET/WG
UreahRO1pwGOCPVCxkfDmv+DxTm3IE0TojT8GvC7QsAD2UapqbLAcCNGN8SoSKD9
8P24pjStItA/6JQVawUIaFLHgcAGHw3WeTf2TQbP6rEF5u5je4BGtELGjSZ72bdS
0RT3CP0eNnLPzh1XqcBGjEPDKWnnglNc0o9XSU3lTNbfgB1cQ2kFQDs/
=ILZY
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of really small fixes here, all driver specific and mostly in
error handling and remove paths.
The most important fixes are for the a3700 clock configuration and a
fix for a nasty stall which could potentially cause data corruption
with the xilinx driver"
* tag 'spi-fix-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel: fixed spin_lock usage inside atmel_spi_remove
spi: sun4i: disable clocks in the remove function
spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()
spi: Fix double "when"
spi: a3700: Fix clk prescaling for coefficient over 15
spi: xilinx: Detect stall with Unknown commands
spi: imx: Update device tree binding documentation
- Fix message timing issues;
cros_ec_spi
- Report correct state when an error occurs;
cros_ec_spi
- Reorder enums used for Power Management;
rtsx_pci
- Use correct OF helper for obtaining child nodes;
twl4030-audio, twl6040
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJaOmxWAAoJEFGvii+H/Hdh7q0P/1/hilKPUkcYME7vE4ZNCVUC
fSZpUjcw4S444TvjjVm7RtRiP0KJMjqM+xUbfoe/Ofu/jhe/+QMu+ygLcEEujssR
qGfLHcPJDodeSwNSAl3Q53ZF8MSsZFPsWA+xKMkdjllM5n8qWPDVN/HkWZR0z9cV
RnwPo5dC/sdc+hBjhxWKLNTAPcJET1zo6IdOoDar2uAuypJB+1vUjTObzIfB0j2a
yUozPhJfTwVMpDvnGMW97XSjRa59KPzmMTnHDBZlqSYCRgD4bUKFp2SX579HpjIW
J/R2AFape6I+mXc7KpTQERncl+b02Uu/LRysQSG/x/SwOGIlrPgBGNxt41YLep/u
iFDMVfXyh4N7sZC2KESiXEQurm/r8w+YHRFf/Z6omv92kshZ/FFNhYp4CJ3WIAqD
ni3BrTXsQqQ0FI+revvG6TE3W4wcNoIfKAI35yy3q7uzOuuL7nDp7HI55JLzYTV8
OcLMTTuKFNUF02pQ1djwkcFxXgfLjF4QW4blLQwMVdzi9gwn9jsg7BcRXuRLScyw
sYm92tFpPHQryX4xaHXG7JwBLeo9OVGi0rIHMxo45IJ4ILqWdcFvOqfBA/PTRbVB
v0FVbtz53/2WLXY0MX7Ihg7Hq/HQG+FWtxEfHOGDBr99ZFR/vUK9le30Lsb7vd/o
pFN+b/7YGMtUPO2zCa1+
=vlCx
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MDF bugfixes from Lee Jones:
- Fix message timing issues and report correct state when an error
occurs in cros_ec_spi
- Reorder enums used for Power Management in rtsx_pci
- Use correct OF helper for obtaining child nodes in twl4030-audio and
twl6040
* tag 'mfd-fixes-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: Fix RTS5227 (and others) powermanagement
mfd: cros ec: spi: Fix "in progress" error signaling
mfd: twl6040: Fix child-node lookup
mfd: twl4030-audio: Fix sibling-node lookup
mfd: cros ec: spi: Don't send first message too soon
All stable fixes here:
- A regression fix of USB-audio for the previous hardening patch
- A potential UAF fix in rawmidi
- HD-audio and USB-audio quirks, the missing new ID
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlo6JA8OHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE9dChAAvHUQUkik1F8KedxtEH+DCuaj0lz7y4vEtv+t
H/dbUMujlh8ywFORLevGMI095KP6ZDs1lxHvTijK8JhgOLbzBCBTU8PPSnsHGz0T
Z2Mxn1RBcaoXGK7Bcz3GVl3zxAsGRnNRrzSIui7OxfZ7fa8zNo0pP9MSz2ShXw9+
gfDjPbBcNV7sr2YY3BQ5DfOyhr/Csa4IhAXNYfc4A+Z8YRlc+3CRGWkNmerqK+eN
M4NZgM6ZfGV6aQCjt+fxciygSQfA+qgcilveScddnm3KTQ/GAfVxpw2IL3Q47PuC
zbL83vVUYzSTP9V0ZtVbrQVEl4Tbr32214B+bwqYyiY2/GTNDpGTmpqSgkVlz3vQ
VDk7rWlAQfaqXeHJo3sjGUCKqC+exEvMUUSXjJXz59eP/l2tXdK6Q8GC9U2p9H5N
UVAyl5NbEU0Zg7t8Jgvpxt/6BDGNDWN+vrWr7rnva/leMw3VUz2mR5oNjj2uDDWE
p8TydPKBZetYjTFqaH/H3e/5NZHyhp7jcmiZyCuq6wMsgOYnnw56eJfXXYj856UJ
M71es/3famBhTj8j0Fj36Zsn9QJQdGFya3MgdjPgV17yUWhzVPePBO6Han3a6bH0
ZXalibypQkvfIv8+xUbLpHznSsFjoA7dyQ4NO8gIHUpU/GDA23inyDltiM3Y5g/9
wcWQKfA=
=A9uJ
-----END PGP SIGNATURE-----
Merge tag 'sound-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All stable fixes here:
- a regression fix of USB-audio for the previous hardening patch
- a potential UAF fix in rawmidi
- HD-audio and USB-audio quirks, the missing new ID"
* tag 'sound-4.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU
ALSA: hda/realtek - Fix Dell AIO LineOut issue
ALSA: rawmidi: Avoid racy info ioctl via ctl device
ALSA: hda - Add vendor id for Cannonlake HDMI codec
ALSA: usb-audio: Add native DSD support for Esoteric D-05X
Commit 966a967116 randomly added alignment to this structure, but
it's actually detrimental to performance of null_blk. Test case:
Running on both the home and remote node shows a ~5% degradation
in performance.
While in there, move blk_status_t to the hole after the integer tag
in the nullb_cmd structure. After this patch, we shrink the size
from 192 to 152 bytes.
Fixes: 966a967116 ("smp: Avoid using two cache lines for struct call_single_data")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous change blindly added massive alignment to the
call_single_data structure in struct request. This ballooned it in size
from 296 to 320 bytes on my setup, for no valid reason at all.
Use the unaligned struct __call_single_data variant instead.
Fixes: 966a967116 ("smp: Avoid using two cache lines for struct call_single_data")
Cc: stable@vger.kernel.org # v4.14
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Siva Reddy Kallam