Set annotation percent type from following choices:
global-period, local-period, global-hits, local-hits
With following report option setup the percent type will be passed to
annotation browser:
$ perf report --percent-type period-local
The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global). The period/hits
keywords set the base the percentage is computed on - the samples period
or the number of samples (hits).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --percent-type option to set annotation percent type from following
choices:
global-period, local-period, global-hits, local-hits
Examples:
$ perf annotate --percent-type period-local --stdio | head -1
Percent | Source code ... es, percent: local period)
$ perf annotate --percent-type hits-local --stdio | head -1
Percent | Source code ... es, percent: local hits)
$ perf annotate --percent-type hits-global --stdio | head -1
Percent | Source code ... es, percent: global hits)
$ perf annotate --percent-type period-global --stdio | head -1
Percent | Source code ... es, percent: global period)
The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global).
The period/hits keywords set the base the percentage is computed on -
the samples period or the number of samples (hits).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In following patches we will allow to switch percent type even for stdio
annotation outputs. Adding the percent type value into the annotation
outputs title.
$ perf annotate --stdio
Percent | Sou ... instructions:u } (2805 samples, percent: local period)
--------------------------- ... ------------------------------------------------------
...
$ perf annotate --stdio2
Samples: 2K of events 'anon ... count (approx.): 156525487, [percent: local period]
safe_write.c() /usr/bin/yes
Percent
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we display the percentages in annotation output based on
number of samples hits. Switching it to period based percentage by
default, because it corresponds more to the time spent on the line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new key bindings to toggle percent type/base in annotation UI browser:
'p' to switch between local and global percent type
'b' to switch between hits and perdio percent base
Add the following help messages to the UI browser '?' window:
...
p Toggle percent type [local/global]
b Toggle percent base [period/hits]
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-17-jolsa@kernel.org
[ Moved percent_type to be the last arg to sym_title(), its an arg to what is being formmated (buf, size) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass 'struct annotation_options' to map_symbol__annotation_dump(), to
carry on and pass the percent_type value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass struct annotation_options to symbol__calc_lines(), to carry on and
pass the percent_type value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be used to carry user selection of percent type for annotation
output.
Passing the percent_type to the annotation_line__print function as the
first step and making it default to current percentage type
(PERCENT_HITS_LOCAL) value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding and computing global period percent value for annotation line.
Storing it in struct annotation_data percent array under new
PERCENT_PERIOD_GLOBAL index.
At the moment it's not displayed, it's coming in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding and computing local period percent value for annotation line.
Storing it in struct annotation_data percent array under new
PERCENT_PERIOD_LOCAL index.
At the moment it's not displayed, it's coming in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding and computing global hits percent value for annotation line.
Storing it in struct annotation_data percent array under new
PERCENT_HITS_GLOBAL index.
At the moment it's not displayed, it's coming in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we can hold multiple percent values for annotation line.
The first member of this array is current local hits percent value
(PERCENT_HITS_LOCAL index), so no functional change is expected.
Adding annotation_data__percent function to return requested percent
value from struct annotation_data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to bring in 'struct hists' object and for that we need 'struct
perf_evsel' object in the scope.
Switching the group data loop with the evsel group loop. It does the
same thing, but it brings evsel object, that we can use later get the
'struct hists' object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need to bring in 'struct hists' variable in this scope, so it's
better we do this rename first.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on previous rename, changing also the local variable names to fit
properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The name 'samples*' is little confusing because we have nested 'struct
sym_hist_entry' under annotation_line struct, which holds 'nr_samples'
as well.
Also the holding struct name is 'annotation_data' so the 'data' name
fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have more current function tto get the title for annotation,
which is hists__scnprintf_title. They both have same output as
far as the annotation's header line goes.
They differ in counting of the nr_samples, hists__scnprintf_title
provides more accurate number based on the setup of the
symbol_conf.filter_relative variable.
Plus it also displays any uid/thread/dso/socket filters/zooms
if there are set any, which annotation__scnprintf_samples_period
does not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no outside user of it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no outside user of it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/r/20180804130521.11408-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing one to hook into the syscalls:sys_enter_NAME tracepoints,
an example is provided that hooks into the 'openat' syscall.
Using it with the probe:vfs_getname probe into getname_flags to get the
filename args as it is copied from userspace:
# perf probe -l
probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname)
# perf trace -e probe:*getname,tools/perf/examples/bpf/sys_enter_openat.c cat /etc/passwd > /dev/null
0.000 probe:vfs_getname:(ffffffffbd2a8983) pathname="/etc/ld.so.preload"
0.022 syscalls:sys_enter_openat:dfd: CWD, filename: 0xafbe8da8, flags: CLOEXEC
0.027 probe:vfs_getname:(ffffffffbd2a8983) pathname="/etc/ld.so.cache"
0.054 syscalls:sys_enter_openat:dfd: CWD, filename: 0xafdf0ce0, flags: CLOEXEC
0.057 probe:vfs_getname:(ffffffffbd2a8983) pathname="/lib64/libc.so.6"
0.316 probe:vfs_getname:(ffffffffbd2a8983) pathname="/usr/lib/locale/locale-archive"
0.375 syscalls:sys_enter_openat:dfd: CWD, filename: 0xe2b2b0b4
0.379 probe:vfs_getname:(ffffffffbd2a8983) pathname="/etc/passwd"
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2po9jcqv1qgj0koxlg8kkg30@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bitmap_zero() is called after bitmap_alloc() in perf code. But
bitmap_alloc() internally uses calloc() which guarantees that allocated
area is zeroed. So following bitmap_zero is unneeded. Drop it.
This happened because of confusing name for bitmap allocator. It
should has name bitmap_zalloc instead of bitmap_alloc.
This series:
https://lkml.org/lkml/2018/6/18/841
introduces a new API for bitmap allocations in kernel, and functions
there are named correctly. Following patch propogates the API to tools,
and fixes naming issue.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: http://lkml.kernel.org/r/20180623073502.16321-1-ynorov@caviumnetworks.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the Ampere Computing eMAG file. This platform follows
the ARMv8 recommended IMPLEMENTATION DEFINED events, where applicable.
Signed-off-by: Sean V Kelley <seanvk.dev@oregontracks.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
LPU-Reference: 20180803041811.17065-1-seanvk.dev@oregontracks.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for s390 auxiliary trace support.
Use 'perf record -e rbd000 -- ls' to create the perf.data file.
Use 'perf report' to display the auxiliary trace data.
Output before:
[root@s35lp76 perf]# ./perf report --stdio
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
[root@s35lp76 perf]#
Output after:
[root@s35lp76 perf]# ./perf report --stdio
18.21% 18.21% ls [kernel.kallsyms] [k] ftrace_likely_update
9.52% 9.52% ls [kernel.kallsyms] [k] lock_acquire
9.38% 9.38% ls [kernel.kallsyms] [k] lock_release
3.45% 3.45% ls [kernel.kallsyms] [k] lock_acquired
2.88% 2.88% ls [kernel.kallsyms] [k] link_path_walk
2.63% 2.63% ls [kernel.kallsyms] [k] __d_lookup
2.38% 2.38% ls [kernel.kallsyms] [k] __d_lookup_rcu
2.04% 2.04% ls [kernel.kallsyms] [k] ___might_sleep
1.83% 1.83% ls [kernel.kallsyms] [k] debug_lockdep_rcu_enabled
1.44% 1.44% ls [kernel.kallsyms] [k] dput
....
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-4-tmricht@linux.ibm.com
[ Use PRI[xd]64 to fix the build on debian:experimental-x-mips (gcc 8.1.0) and others ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for s390 auxiliary trace support.
Use 'perf record -e rbd000' to create the perf.data file. The event
also has the symbolic name SF_CYCLES_BASIC_DIAG, using 'perf record -e
SF_CYCLES_BASIC_DIAG' is equivalent.
Use 'perf report -D' to display the auxiliary trace data.
Output before:
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
Nothing else
Output after:
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
.
. ... s390 AUX data: size 262144 bytes
[00000000] Basic Def:0001 Inst:0000 TW AS:3 ASN:0xffff IA:0x0000000000c2f1bc
CL:1 HPP:0x8000000000000000 GPP:000000000000000000
[0x000020] Diag Def:8005
[0x0000bf] Basic Def:0001 Inst:0000 TW AS:3 ASN:0xffff IA:0x0000000000c2f1bc
CL:1 HPP:0x8000000000000000 GPP:000000000000000000
[0x0000df] Diag Def:8005
[0x00017e] Basic Def:0001 Inst:0000 TW AS:3 ASN:0xffff IA:0x0000000000c2f1bc
CL:1 HPP:0x8000000000000000 GPP:000000000000000000
....
[0x000fc0] Trailer F T bsdes:32 dsdes:159 Overflow:0 Time:0xd4ab59a8450fa108
C:1 TOD:0xd4ab4ec98ceb3832 1:0x8000000000000000 2:0xd4ab4ec98ceb3832
This output is shown for every sampled data block. The
output contains the
- basic-sampling data entry
- diagnostic-sampling data entry
- trailer entry
The basic sampling entry and diagnostic sampling entry sizes can be
extracted using the trailer entries in the SDB. On older hardware these
values (bsdes and dsdes in the trailer entry) are reserved and zero.
Older hardware use hard coded values based on the s390 machine type.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20180802074622.13641-3-tmricht@linux.ibm.com
Link: http://lkml.kernel.org/r/eda2632e-7919-5ffd-5f68-821e77d216fa@linux.ibm.com
[ Merged a fix for a 'tipe puned' problem reported by Michael Ellerman see last Link tag. ]
[ Removed __packed from two structs, they're already naturally packed and having that. ]
[ attribute breaks the build in gcc 8.1.1 mips, 4.4.7 x86_64, 7.1.1 ARCompact ISA, etc) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now it looks just about the same as for the trace__sys_{enter,exit}.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-y59may7zx1eccnp4m3qm4u0b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mapping "__syscall_nr" to "id" and setting up "args" from the offset of
"__syscall_nr" + sizeof(u64), as the payload for syscalls:* is the same
as for raw_syscalls:*, just the fields have different names.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ogeenrpviwcpwl3oy1l55f3m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid having to ask libtraceevent to find a field by name when
handling each tracepoint event, we setup a struct syscall_tp with
a tp_field struct having an extractor function + the offset for the
"id", "args" and "ret" raw_syscalls:sys_{enter,exit} tracepoints.
Now that we want to do the same with syscalls:sys_{entry,exit}_NAME
individual syscall tracepoints, where we have "id" as "__syscall_nr" and
"args" as the actual series of per syscall parameters, we need more
flexibility from the routines that set up these pre-looked up syscall
tracepoint arg fields.
The next cset will use it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-v59q5e0jrlzkpl9a1c7t81ni@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because raw_syscalls have the field for the syscall number as 'id' while
the syscalls:sys_{enter,exit}_NAME have it as __syscall_nr...
Since we want to support both for being able to enable just a
syscalls:sys_{enter,exit}_name instead of asking for
raw_syscalls:sys_{enter,exit} plus filters, make the method names for
each kind of tracepoint more explicit.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4rixbfzco6tsry0w9ghx3ktb@git.kernel.org
Signef-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using the beautifiers only when processing the
raw_syscalls:sys_enter events, but we can as well use them for the
syscalls:sys_enter_NAME events, as the layout is the same.
Some more tweaking is needed as we're processing them straight away,
i.e. there is no buffering in the sys_enter_NAME event to wait for
things like vfs_getname to provide pointer contents and then flushing
at sys_exit_NAME, so we need to state in the syscall_arg that this
is unbuffered, just print the pointer values, beautifying just
non-pointer syscall args.
This just shows an alternative way of processing tracepoints, that we
will end up using when creating "tracepoint" payloads that already copy
pointer contents (or chunks of it, i.e. not the whole filename, but just
the end of it, not all the bf for a read/write, but just the start,
etc), directly in the kernel using eBPF.
E.g.:
# perf trace -e syscalls:*enter*sleep,*sleep sleep 1
0.303 ( ): syscalls:sys_enter_nanosleep:rqtp: 0x7ffc93d5ecc0
0.305 (1000.229 ms): sleep/8746 nanosleep(rqtp: 0x7ffc93d5ecc0) = 0
# perf trace -e syscalls:*_*sleep,*sleep sleep 1
0.288 ( ): syscalls:sys_enter_nanosleep:rqtp: 0x7ffecde87e40
0.289 ( ): sleep/8748 nanosleep(rqtp: 0x7ffecde87e40) ...
1000.479 ( ): syscalls:sys_exit_nanosleep:0x0
0.289 (1000.208 ms): sleep/8748 ... [continued]: nanosleep()) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jehyd2zwhw00z3p7v7mg9632@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the vfs_getname() wannabe tracepoint is in place:
# perf probe -l
probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname)
#
'perf trace' will use it to get the pathname when it is copied from
userspace to the kernel, right after syscalls:sys_enter_open, copied
in the 'probe:vfs_getname', stash it somewhere and then, at
syscalls:sys_exit_open time, if the 'open' return is not -1, i.e. a
successfull open syscall, associate that pathname to this return, i.e.
the fd.
We were not doing this for the 'openat' syscall, which would cause 'perf
trace' to fallback to using /proc to get the fd, change it so that we
use what we got from probe:vfs_getname, reducing the 'openat'
beautification process cost, ditching the syscalls performed to read
procfs state and avoiding some possible races in the process.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-xnp44ao3bkb6ejeczxfnjwsh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf trace: (Arnaldo Carvalho de Melo)
- Do not require --no-syscalls to suppress strace like output, i.e.
# perf trace -e sched:*switch
will show just sched:sched_switch events, not strace-like formatted
syscall events, use --syscalls to get the previous behaviour.
If instead:
# perf trace
is used, i.e. no events specified, then --syscalls is implied and
system wide strace like formatting will be applied to all syscalls.
The behaviour when just a syscall subset is used with '-e' is unchanged:
# perf trace -e *sleep,sched:*switch
will work as before: just the 'nanosleep' syscall will be strace-like
formatted plus the sched:sched_switch tracepoint event, system wide.
- Allow string table generators to use a default header dir, allowing
use of them without parameters to see the table it generates on
stdout, e.g.:
$ tools/perf/trace/beauty/kvm_ioctl.sh
static const char *kvm_ioctl_cmds[] = {
[0x00] = "GET_API_VERSION",
[0x01] = "CREATE_VM",
[0x02] = "GET_MSR_INDEX_LIST",
[0x03] = "CHECK_EXTENSION",
<BIG SNIP>
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
[0xe3] = "HAS_DEVICE_ATTR",
};
$
See 'ls tools/perf/trace/beauty/*.sh' to see the available string
table generators.
- Add a generator for IPPROTO_ socket's protocol constants.
perf record: (Kan Liang)
- Fix error out while applying initial delay and using LBR, due to
the use of a PERF_TYPE_SOFTWARE/PERF_COUNT_SW_DUMMY event to track
PERF_RECORD_MMAP events while waiting for the initial delay. Such
events fail when configured asking PERF_SAMPLE_BRANCH_STACK in
perf_event_attr.sample_type.
perf c2c: (Jiri Olsa)
- Fix report crash for empty browser, when processing a perf.data file
without events of interest, either because not asked for in
'perf record' or because the workload didn't triggered such events.
perf list: (Michael Petlan)
- Align metric group description format with PMU event description.
perf tests: (Sandipan Das)
- Fix indexing when invoking subtests, which caused BPF tests to
get results for the next test in the list, with the last one
reporting a failure.
eBPF:
- Fix installation directory for header files included from eBPF proggies,
avoiding clashing with relative paths used to build other software projects
such as glibc. (Thomas Richter)
- Show better message when failing to load an object. (Arnaldo Carvalho de Melo)
General: (Christophe Leroy)
- Allow overriding MAX_NR_CPUS at compile time, to make the tooling
usable in systems with less memory, in time this has to be changed
to properly allocate based on _NPROCESSORS_ONLN.
Architecture specific:
- Update arm64's ThunderX2 implementation defined pmu core events (Ganapatrao Kulkarni)
- Fix complex event name parsing in 'perf test' for PowerPC, where the 'umask' event
modifier isn't present. (Sandipan Das)
CoreSight ARM hardware tracing: (Leo Yan)
- Fix start tracing packet handling.
- Support dummy address value for CS_ETM_TRACE_ON packet.
- Generate branch sample when receiving a CS_ETM_TRACE_ON packet.
- Generate branch sample for CS_ETM_TRACE_ON packet.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=fPkX
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.19-20180801' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf trace: (Arnaldo Carvalho de Melo)
- Do not require --no-syscalls to suppress strace like output, i.e.
# perf trace -e sched:*switch
will show just sched:sched_switch events, not strace-like formatted
syscall events, use --syscalls to get the previous behaviour.
If instead:
# perf trace
is used, i.e. no events specified, then --syscalls is implied and
system wide strace like formatting will be applied to all syscalls.
The behaviour when just a syscall subset is used with '-e' is unchanged:
# perf trace -e *sleep,sched:*switch
will work as before: just the 'nanosleep' syscall will be strace-like
formatted plus the sched:sched_switch tracepoint event, system wide.
- Allow string table generators to use a default header dir, allowing
use of them without parameters to see the table it generates on
stdout, e.g.:
$ tools/perf/trace/beauty/kvm_ioctl.sh
static const char *kvm_ioctl_cmds[] = {
[0x00] = "GET_API_VERSION",
[0x01] = "CREATE_VM",
[0x02] = "GET_MSR_INDEX_LIST",
[0x03] = "CHECK_EXTENSION",
<BIG SNIP>
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
[0xe3] = "HAS_DEVICE_ATTR",
};
$
See 'ls tools/perf/trace/beauty/*.sh' to see the available string
table generators.
- Add a generator for IPPROTO_ socket's protocol constants.
perf record: (Kan Liang)
- Fix error out while applying initial delay and using LBR, due to
the use of a PERF_TYPE_SOFTWARE/PERF_COUNT_SW_DUMMY event to track
PERF_RECORD_MMAP events while waiting for the initial delay. Such
events fail when configured asking PERF_SAMPLE_BRANCH_STACK in
perf_event_attr.sample_type.
perf c2c: (Jiri Olsa)
- Fix report crash for empty browser, when processing a perf.data file
without events of interest, either because not asked for in
'perf record' or because the workload didn't triggered such events.
perf list: (Michael Petlan)
- Align metric group description format with PMU event description.
perf tests: (Sandipan Das)
- Fix indexing when invoking subtests, which caused BPF tests to
get results for the next test in the list, with the last one
reporting a failure.
eBPF:
- Fix installation directory for header files included from eBPF proggies,
avoiding clashing with relative paths used to build other software projects
such as glibc. (Thomas Richter)
- Show better message when failing to load an object. (Arnaldo Carvalho de Melo)
General: (Christophe Leroy)
- Allow overriding MAX_NR_CPUS at compile time, to make the tooling
usable in systems with less memory, in time this has to be changed
to properly allocate based on _NPROCESSORS_ONLN.
Architecture specific:
- Update arm64's ThunderX2 implementation defined pmu core events (Ganapatrao Kulkarni)
- Fix complex event name parsing in 'perf test' for PowerPC, where the 'umask' event
modifier isn't present. (Sandipan Das)
CoreSight ARM hardware tracing: (Leo Yan)
- Fix start tracing packet handling.
- Support dummy address value for CS_ETM_TRACE_ON packet.
- Generate branch sample when receiving a CS_ETM_TRACE_ON packet.
- Generate branch sample for CS_ETM_TRACE_ON packet.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The next example scripts need the definition for the BPF functions, i.e.
things like BPF_FUNC_probe_read, and in time will require lots of other
definitions found in uapi/linux/bpf.h, so include it from the bpf.h file
included from the eBPF scripts build with clang via '-e bpf_script.c'
like in this example:
$ tail -8 tools/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
return sec == 5;
}
license(GPL);
$
That 'bpf.h' include in the 5sec.c eBPF example will come from a set of
header files crafted for building eBPF objects, that in a end-user
system will come from:
/usr/lib/perf/include/bpf/bpf.h
And will include <uapi/linux/bpf.h> either from the place where the
kernel was built, or from a kernel-devel rpm package like:
-working-directory /lib/modules/4.17.9-100.fc27.x86_64/build
That is set up by tools/perf/util/llvm-utils.c, and can be overriden
by setting the 'kbuild-dir' variable in the "llvm" ~/.perfconfig file,
like:
# cat ~/.perfconfig
[llvm]
kbuild-dir = /home/foo/git/build/linux
This usually doesn't need any change, just documenting here my findings
while working with this code.
In the future we may want to instead just use what is in
/usr/include/linux/bpf.h, that comes from the UAPI provided from the
kernel sources, for now, to avoid getting the kernel's non-UAPI
"linux/bpf.h" file, that will cause clang to fail and is not what we
want anyway (no BPF function definitions, etc), do it explicitely by
asking for "uapi/linux/bpf.h".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zd8zeyhr2sappevojdem9xxt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After update of kernel, the perf tool doesn't run anymore on my 32MB RAM
powerpc board, but still runs on a 128MB RAM board:
~# strace perf
execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory)
--- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} ---
+++ killed by SIGSEGV +++
Segmentation fault
objdump -x shows that .bss section has a huge size of 24Mbytes:
27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3
With especially the following objects having quite big size:
10205f80 l O .bss 00140000 runtime_cycles_stats
10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats
10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats
105c5f80 l O .bss 00140000 runtime_branches_stats
10705f80 l O .bss 00140000 runtime_cacherefs_stats
10845f80 l O .bss 00140000 runtime_l1_dcache_stats
10985f80 l O .bss 00140000 runtime_l1_icache_stats
10ac5f80 l O .bss 00140000 runtime_ll_cache_stats
10c05f80 l O .bss 00140000 runtime_itlb_cache_stats
10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats
10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats
10fc5f80 l O .bss 00140000 runtime_transaction_stats
11105f80 l O .bss 00140000 runtime_elision_stats
11245f80 l O .bss 00140000 runtime_topdown_total_slots
11385f80 l O .bss 00140000 runtime_topdown_slots_retired
114c5f80 l O .bss 00140000 runtime_topdown_slots_issued
11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles
11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles
This is due to commit 4d255766d2 ("perf: Bump max number of cpus
to 1024"), because many tables are sized with MAX_NR_CPUS
This patch gives the opportunity to redefine MAX_NR_CPUS via
$ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
libbpf: license of tools/perf/examples/bpf/etcsnoop.c is GPL
libbpf: section(6) version, size 4, link 0, flags 3, type=1
libbpf: kernel version of tools/perf/examples/bpf/etcsnoop.c is 41200
libbpf: section(7) .symtab, size 120, link 1, flags 0, type=2
bpf: config program 'syscalls:sys_enter_openat'
libbpf: load bpf program failed: Operation not permitted
libbpf: failed to load program 'syscalls:sys_enter_openat'
libbpf: failed to load object 'tools/perf/examples/bpf/etcsnoop.c'
bpf: load objects failed
After: (just the last line changes)
bpf: load objects failed: err=-4009: (Incorrect kernel version)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wi44iid0yjfht3lcvplc75fm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PMU event descriptions use 7 spaces + '[' or 8 spaces as indentation.
Metric groups used a tab + '['. This patch unifies it to the way PMU
event descriptions are indented.
BEFORE:
$ perf list
[...]
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
[...]
AFTER:
$ perf list
[...]
Metric Groups:
DSB:
DSB_Coverage
[Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)]
[...]
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
LPU-Reference: 771439042.22924766.1532986504631.JavaMail.zimbra@redhat.com
Link: https://lkml.kernel.org/n/tip-mlo850517m6u1rbjndvd1bwr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CS_ETM_TRACE_ON packet itself can give the info that there have a
discontinuity in the trace, this patch is to add branch sample for
CS_ETM_TRACE_ON packet if it is inserted in the middle of CS_ETM_RANGE
packets; as result we can have hint for the trace discontinuity.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-7-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If one CS_ETM_TRACE_ON packet is inserted, we miss to generate branch
sample for the previous CS_ETM_RANGE packet.
This patch is to generate branch sample when receiving a CS_ETM_TRACE_ON
packet, so this can save complete info for the previous CS_ETM_RANGE
packet just before CS_ETM_TRACE_ON packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-6-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For CS_ETM_TRACE_ON packet, its fields 'packet->start_addr' and
'packet->end_addr' equal to 0xdeadbeefdeadbeefUL which are emitted in
the decoder layer as dummy value, but the dummy value is pointless for
branch sample when we use 'perf script' command to check program flow.
This patch is a preparation to support CS_ETM_TRACE_ON packet for branch
sample, it converts the dummy address value to zero for more readable;
this is accomplished by cs_etm__last_executed_instr() and
cs_etm__first_executed_instr(). The later one is a new function
introduced by this patch.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-5-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Usually the start tracing packet is a CS_ETM_TRACE_ON packet, this
packet is passed to cs_etm__flush(); cs_etm__flush() will check the
condition 'prev_packet->sample_type == CS_ETM_RANGE' but 'prev_packet'
is allocated by zalloc() so 'prev_packet->sample_type' is zero in
initialization and this condition is false. So cs_etm__flush() will
directly bail out without handling the start tracing packet.
This patch is to introduce a new sample type CS_ETM_EMPTY, which is used
to indicate the packet is an empty packet. cs_etm__flush() will swap
packets when it finds the previous packet is empty, so this can record
the start tracing packet into 'etmq->prev_packet'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1531295145-596-4-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tool build and install is controlled via a Makefile. The
'install' rule creates directories and copies files. Among them are
header files installed in /usr/lib/include/perf/bpf/.
However all listed examples are installing its header files in
/usr/lib/<tool-name>/...[/include]/header.h
and not in
/usr/lib/include/<tool-name>/.../header.h.
Background information:
Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc
-m31) as gcc is not able to find header-files like stdbool.h.
In the glibc.spec file, you can see that glibc is configured with
"--with-headers". In this case, first -nostdinc is added to the CFLAGS
and then further include paths are added via -isystem. One of those
paths should contain header files like stdbool.h.
In order to get this path, gcc is invoked with:
- on Fedora 28 (with 4.18 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include
=> If perf is installed, this is: /usr/lib/include
On my machine this directory is only containing the directory "perf".
If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include
- on Ubuntu 18.04 (with 4.15 kernel):
$ gcc -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
$ gcc -m31 -print-file-name=include
/usr/lib/gcc/s390x-linux-gnu/7/include
=> gcc returns the correct path even if perf is installed.
In each case, the introduction of the subdirectory /usr/lib/include
leads to the regression that one can not build the glibc RPM for s390
anymore as gcc can not find headers like stdbool.h.
To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h
Output before using the command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/include/perf/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Output after using command 'perf test -Fv 40':
echo '...[bpf-program-source]...' | /usr/bin/clang ... \
-I/root/lib/perf/include/bpf ...
^^^^^^^^^^^^
...
[root@p23lp27 perf]# perf test -F 40
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
[root@p23lp27 perf]#
Committer testing:
While the above 'perf test -F 40' (or 'perf test bpf') will allow us
to see that the correct path is now added via -I, to actually test this
we better try to use a bpf script that includes files in the changed
directory.
We have the files that now reside in /root/lib/perf/examples/bpf/ to do
just that:
# tail -8 /root/lib/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
return sec == 5;
}
license(GPL);
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4
0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5
0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ...
0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6
0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0
# perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987
0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ...
0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5
0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0
#
Suggested-by: Stefan Liebler <stli@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: 1b16fffa38 ("perf llvm-utils: Add bpf include path to clang command line")
Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf c2c' scans read/write accesses and tries to find false sharing
cases, so when the events it wants were not asked for or ended up not
taking place, we get no histograms.
So do not try to display entry details if there's not any. Currently
this ends up in crash:
$ perf c2c report # then press 'd'
perf: Segmentation fault
$
Committer testing:
Before:
Record a perf.data file without events of interest to 'perf c2c report',
then call it and press 'd':
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (6 samples) ]
# perf c2c report
perf: Segmentation fault
-------- backtrace --------
perf[0x5b1d2a]
/lib64/libc.so.6(+0x346df)[0x7fcb566e36df]
perf[0x46fcae]
perf[0x4a9f1e]
perf[0x4aa220]
perf(main+0x301)[0x42c561]
/lib64/libc.so.6(__libc_start_main+0xe9)[0x7fcb566cff29]
perf(_start+0x29)[0x42c999]
#
After the patch the segfault doesn't take place, a follow up patch to
tell the user why nothing changes when 'd' is pressed would be good.
Reported-by: rodia@autistici.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f1c5fd4d0b ("perf c2c report: Add TUI cacheline browser")
Link: http://lkml.kernel.org/r/20180724062008.26126-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently, the subtest numbering was changed to start from 1. While it
is fine for displaying results, this should not be the case when the
subtests are actually invoked.
Typically, the subtests are stored in zero-indexed arrays and invoked
based on the index passed to the main test function. Since the index
now starts from 1, the second subtest in the array (index 1) gets
invoked instead of the first (index 0). This applies to all of the
following subtests but for the last one, the subtest always fails
because it does not meet the boundary condition of the subtest index
being lesser than the number of subtests.
This can be observed on powerpc64 and x86_64 systems running Fedora 28
as shown below.
Before:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : FAILED!
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : FAILED!
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : FAILED!
After:
# perf test "builtin clang support"
55: builtin clang support :
55.1: builtin clang compile C source to IR : Ok
55.2: builtin clang compile C source to ELF object : Ok
# perf test "LLVM search and compile"
38: LLVM search and compile :
38.1: Basic BPF llvm compile : Ok
38.2: kbuild searching : Ok
38.3: Compile source for BPF prologue generation : Ok
38.4: Compile source for BPF relocation : Ok
# perf test "BPF filter"
40: BPF filter :
40.1: Basic BPF filtering : Ok
40.2: BPF pinning : Ok
40.3: BPF prologue generation : Ok
40.4: BPF relocation checker : Ok
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Fixes: 9ef0112442 ("perf test: Fix subtest number when showing results")
Link: http://lkml.kernel.org/r/20180726171733.33208-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For instance:
$ trace -e socket* ssh sandy
0.000 ( 0.031 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
0.052 ( 0.015 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.568 ( 0.020 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.603 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.699 ( 0.014 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.724 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3
1.804 ( 0.020 ms): ssh/19919 socket(family: INET, type: STREAM, protocol: TCP ) = 3
17.549 ( 0.098 ms): ssh/19919 socket(family: LOCAL, type: STREAM ) = 4
acme@sandy's password:
Just like with other syscall args, the common bits are supressed so that
the output is more compact, i.e. we use "TCP" instead of "IPPROTO_TCP",
but we can make this show the original constant names if we like it by
using some command line knob or ~/.perfconfig "[trace]" section
variable.
Also needed is to make perf's event parser accept things like:
$ perf trace -e socket*/protocol=TCP/
By using both the tracefs event 'format' files and these tables built
from the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-l39jz1vnyda0b6jsufuc8bz7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be wired to 'perf trace' in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2i9vkvm1ik8yu4hgjmxhsyjv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We may have string tables where not all slots have values, in those
cases its better to print the numeric value, for instance:
In the table below we would show "protocol: (null)" for
socket_ipproto[3]
Where it would be better to show "protocol: 3".
$ tools/perf/trace/beauty/socket_ipproto.sh
static const char *socket_ipproto[] = {
[0] = "IP",
[103] = "PIM",
[108] = "COMP",
[12] = "PUP",
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
[255] = "RAW",
[29] = "TP",
[2] = "IGMP",
[33] = "DCCP",
[41] = "IPV6",
[46] = "RSVP",
[47] = "GRE",
[4] = "IPIP",
[50] = "ESP",
[51] = "AH",
[6] = "TCP",
[8] = "EGP",
[92] = "MTP",
[94] = "BEETPH",
[98] = "ENCAP",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7djfak94eb3b9ltr79cpn3ti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa