Commit Graph

25 Commits

Author SHA1 Message Date
Krzysztof Kozlowski 14b2f7d908 powerpc/configs: Remove useless UEVENT_HELPER_PATH
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
   CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
   made default to 'n',
2. It is not recommended (help message: "This should not be used today
   [...] creates a high system load") and was kept only for ancient
   userland,
3. Certain userland specifically requests it to be disabled (systemd
   README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:36 +10:00
Michael Ellerman 22220b16df powerpc/configs/mpc5200: Drop no longer needed CONFIG_FB
Since commit a03fdcb186 ("drm: Add top level Kconfig option for DRM
fbdev emulation") we no longer need to set CONFIG_FB in our
defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28 22:10:18 +10:00
Michael Ellerman 360426fb8c powerpc/configs: Update for CONFIG_FIXED_PHY being selected by CONFIG_OF_MDIO
In commit a5e4bd9913 ("of_mdio: select fixed phy support
unconditionally"), CONFIG_OF_MDIO began selecting CONFIG_FIXED_PHY.

That means we no longer need to set it some of our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28 22:10:04 +10:00
Michael Ellerman 5ee5d80833 powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNG
Since commit 401e4238f3 ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28 22:10:01 +10:00
Andrew Donnellan bdd910017c powerpc/configs: Remove old symbols from defconfigs
Update defconfigs to remove old symbols and comments referencing old
symbols.

Dropped:

* AVERAGE
* INET_LRO
* EXT3_DEFAULTS_TO_ORDERED
* EXT3_FS_XATTR
* I2O
* INFINIBAND_AMSO1100
* INFINIBAND_EHCA
* IP1000

Replaced:

* BLK_DEV_XIP -> BLK_DEV_RAM_DAX
* CLK_PPC_CORENET -> CLK_QORIQ
* EXT2_FS_XIP -> FS_DAX
* EXT3_FS* -> EXT4_FS*

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-08 22:10:07 +10:00
Michael Ellerman a85cade676 powerpc: Update all configs using savedefconfig
It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 18:06:58 +11:00
Bart Van Assche aa3fc09078 tgt: defconfig cleanup
Because of the removal of the scsi_tgt kernel module, the kbuild variables
CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS
are obsolete. This patch removes these variables. This patch is the result
of the following command:

find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-07-17 22:07:44 +02:00
Naoki MATSUMOTO 3a0d89d3f8 USB: delete CONFIG_USB_DEVICEFS from defconfig
It no longer occurs in Kconfig.
USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig.

Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 16:07:13 -07:00
Anatolij Gustschin 84953f969b powerpc/52xx: Re-enable bestcomm driver in defconfigs
The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-10 11:25:08 +11:00
Heiko Schocher 70a3e5a029 powerpc/mpc5200: add options to mpc5200_defconfig
Add the following options to the mpc5200_defconfig, needed
for the a4m072 board support:

CONFIG_AMD_PHY=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM87=m
CONFIG_RTC_DRV_PCF8563=m

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-03-21 10:40:28 +11:00
Heiko Schocher dd83191625 powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
Add following options to mpc5200_defconfig:

- CONFIG_MTD_PLATRAM=y
  (selects CONFIG_MTD_RAM, so this is removed)
- CONFIG_FIXED_PHY=y
- CONFIG_SENSORS_LM80=y
- CONFIG_FB_FOREIGN_ENDIAN=y
- CONFIG_FB_SM501=m
- CONFIG_RTC_DRV_DS1374=y

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Grant Likely <grant.likely@secretlab.ca>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2012-03-18 23:59:42 +01:00
Timur Tabi 40dc7e8b4a powerpc/5200: enable audio in the defconfig
Audio support for the MPC5200 exists, so enable it by default.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-22 23:24:06 +02:00
Stephen Rothwell ff56535d29 powerpc: Restore some misc devices to our configs
Uwe Kleine-König reported:

	while working on an defconfig (arm/mx27) I noticed that just updating
	it[1] results in removing CONFIG_EEPROM_AT24=y.  The reason is that
	since commit

		v2.6.36-5965-g5f2365d (misc devices: do not enable by default)

	MISC_DEVICES isn't enabled anymore by default.  So all defconfigs that
	have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on
	MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same
	problem.

This restores those misc devices to the powerpc defconfigs.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Uwe Kleine-König
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-30 10:36:23 +11:00
Benjamin Herrenschmidt 61a3e1665f powerpc: Trim defconfigs
This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09 11:19:16 +10:00
Grant Likely 65cf840ff4 powerpc: Disable CONFIG_SYSFS_DEPRECATED
Acked-by: Grant Likely <grant.likely@secretlab.ca>

On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote:

CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not
be required for any distro in the last 3 or 4 years, so disable it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15 15:02:33 +10:00
Grant Likely acc6a0935e powerpc/52xx: update defconfigs
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-03-10 14:39:50 -07:00
Grant Likely 06d352f2f1 powerpc/5200: update defconfigs
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-30 15:21:11 -07:00
Grant Likely 4bdf0bb7d6 powerpc/5200: Update defconfigs
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 10:40:47 -06:00
Heiko Schocher 830cb6fafc mpc5200: support for the MAN mpc5200 based board mucmc52
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 09:33:24 -06:00
Grant Likely 8db70d3dee powerpc/5200: defconfig updates
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-04-20 11:33:12 -06:00
Grzegorz Bernacki 652b2db16f powerpc/5200: Add digsy-mtc support to mpc5200_defconfig
The following options are enabled to support the digsy-mtc.
 - LXT phy
 - AT24 eeprom
 - RTC (DS1337)
 - MTD partitioning based on OF description

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-26 22:55:03 -07:00
Grant Likely d35ec494a6 powerpc/5200: update defconfigs
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-01-29 17:08:38 -07:00
Jean Delvare dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Grant Likely c7c2ffb4fb powerpc/52xx: update defconfigs
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-11-14 10:22:02 -07:00
Grant Likely 0a0a5af30b [POWERPC] mpc5200: merge defconfigs for all mpc5200 boards
There is no reason to have separate defconfigs for each mpc5200 board.
Instead, here is a common defconfig that can be used for all supported
platforms.

Merging the defconfigs means there are fewer configuration to test when
compile testing all of arch/powerpc and should make support easier.

Supported boards:
	Lite5200(b), Efika, TQM5200, CM5200, MotionPro

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-21 11:22:22 -07:00