This is another patch preparing for sharing of the glock hash
table between different gfs2 mounts.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Use snprintf(buf, PAGE_SIZE, ...) instead of sprintf for sysfs show
methods. Per instructions in Documentation/filesystems/sysfs.txt
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Ass a comment explaining the slightly odd construct used to
pass error values back.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's follow up emails, here are a few small
fixes which were missed earlier.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's request, some unused code is removed and
some consts added in the quota code.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's comments, removed some unused code and
removed some brackets which were not required.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's request and also a few of my own. It has
been possible to add a few most const to the code as a result of
the change in gfs2_ea_name2type.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's request, I've added a ',' to the end of
each of the multi-line structures which didn't already have
one (most already did).
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's comments, this should make all the headers
compile on their own by including and/or declaring structures
early.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per comments from Jan Engelhardt, remove redundant casts, redundant
endian conversions, add a smattering of const and rewrite the
dirent_next function in order to avoid as many casts as possible.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Introduce a couple of new constants which make the NFS filehandle
sizes that GFS2 uses a bit clearer. Also fix one or two minor
issues as per Jan Engelhardt's sixth email.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's fifth email. This has most of the changes
recommended, which is the removal of casts which are not required,
some indenting fixes and similar.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per the remainder of Jan Engelhardt's fourth email comments,
remove an cast thats not required. Also tidy up the "limit" code
in stuck_releasepage().
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Use const in endian conversion and printing of on-disk structures.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's fourth email, this is the first part of the
change set with a few minor style points.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The remains of the changes for Jan Engelhardt's third email. Remove
a cast and tidy up gfs2_inode_attr_in.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This makes all fixed size types have consistent names.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's third set of comments, this make various
code style changes and moves the structures from format.h into
super.c, which was the only place that format.h was actually used.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Jan Engelhardt's second email, this removes some unused code,
and fixes up indenting in various places.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.
The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].
I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes three main bugs. Firstly the direct i/o get_block
was returning the wrong return code in certain cases. Secondly, the
GFS2's releasepage function was not dealing with cases when clean,
ordered buffers were found still queued on a transaction (which can
happen depending on the ordering of journal flushes). Thirdly, the
journaling code itself needed altering to take account of the
after effects of removing the clean ordered buffers from the transactions
before a journal flush.
The releasepage bug did also show up under "normal" buffered i/o
as well, so its not just a fix for direct i/o. In fact its not
normally used in the direct i/o path at all, except when flushing
existing buffers after performing a direct i/o write, but that was
the code path that led us to spot this.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds the superblock as a key for glock lookups. Since the glocks
are already stored in a per-superblock table, this has no effect at
the moment. Later on this will change though.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We can take advantage of the slab allocator to ensure that all the list
heads and the spinlock (plus one or two other fields) are initialised
by slab to speed up allocation of glocks.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Remove the unused sync feature from glocks. This is currently done by
calling the required functions to sync pages/blocks directly so this
code isn't needed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
For all the usual reasons of enforcing correctness and potentially
reducing code size, this patch makes the glock operations const.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch allows the simultaneous mounting of gfs2meta and gfs2
filesystems. A restriction however is that a gfs2meta fs may only be
mounted if its corresponding gfs2 filesystem is also mounted. Also, a
gfs2 filesystem cannot be unmounted before its gfs2meta filesystem.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
log_refund() incorrectly assumed that if a transaction had been touched, it
always committed buffers to the incore log. Thus, when you got around to
flushing the log, you would need one more block than you committed, to account
for the header. So it automatically set reserved to 1, which had the effect of
making sdp->sd_log_blks_reserved one greater when you got to gfs2_log_flush().
However, if you don't actually commit anything to the incore log between
flushes, you don't need the header, because you aren't writing anything out.
With this patch, log_refund() only increments reservered to account for the
header if something has been committed since the last flush.
Signed-off-by: Benjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
I noticed the gfs2_scand seemed to be taking a lot of CPU,
so in order to cut that down a bit, here is a patch. Firstly
the type of a glock is a constant during its lifetime, so that
its possible to check this without needing locking. I've moved
the (common) case of testing for an inode glock outside of
the glmutex lock.
Also there was a mutex left over from when the glock cache was
master of the inode cache. That isn't required any more so I've
removed that too.
There is probably scope for further speed ups in the future
in this area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This should clarify the logic in gfs2_releasepage() relating to
error handling as well as making the response to errors a bit
more graceful.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
A list_del should have been a list_del_init in lops.c which was
resulting in incorrect status returns from list_empty().
Signed-off-by: Steven Whitheouse <swhiteho@redhat.com>
This fixes a memory leak of struct gfs2_bufdata and also some
problems in the ordered write handling code. It needs a bit
more testing, but I believe that the reference counting of
ordered write buffers should now be correct.
This is aimed at fixing Red Hat bugzilla: #201028 and #201082
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
recovery.c add a brelse to deal with gfs2_replay_read_block being called
twice on the same block.
add a dput to drop the ref count on the root inode.
This was causing lingering glocks and thus causing
a mount failure to hang.
Fix a endian conversion macro that was was swizzling
16bits when it should have been swizzling 32.
Signed-off-by: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In some cases we can enter write page without there being buffers
attached to the page. In this case the function to add gfs2_bufdata
to the buffers fails sliently causing further failures down the
stack.
This fix ensures that we always add buffers in writepage if they
didn't already exist (mmap is one way to trigger this).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When the result of a posix lock request is read it needs to be matched up
with the correct waiting request. The owner field needs to be used in the
comparison since more than one process may be waiting for locks on the
same file.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Use the gfs2_ prefix on the register/unregister functions for the lock
modules. The gfs_ prefix was left from an old idea on how to share these
with gfs1.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Mmapped files were able to trigger a lock ordering bug. Private
maps do not need to take the glock so early on. Shared maps do
unfortunately, however we can get around that by adding a flag
into the flags for the struct gfs2_file. This only works because
we are taking an exclusive lock at this point, so we know that
nobody else can be racing with us.
Fixes Red Hat bugzilla: #201196
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This was a nasty bug which resulted in corruption of hash tables
in the directory code with larger directories. We forgot to
increment a pointer in the read/write routines internal to the
directory code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We need to use fl_owner instead of fl_pid to track the owner of a posix
lock. Pass the owner value out to user space where cluster plocks are
managed.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tidy up some files and remove an unused routine in meta_io.h. Also
added a bit of extra debugging in meta_io.h.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This means that we don't need to create a special inode just to contain
a struct address_space in order to read a single disk block. Instead
we read the disk block directly. Its slightly faster, and uses slightly
less memory, but the real reason for doing this is that it removes a
special case from the glock code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The remaining routines in page.c were all only used in one other
file, so they are now moved into the files where they are referenced
and made static. Thus page.[ch] are no longer required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tidy up gfs2_unstuffer_page by:
a) Moving it into bmap.c
b) Making it static
c) Calling it directly from gfs2_unstuff_dinode
d) Updating all callers of gfs2_unstuff_dinode due to one less
required argument.
It doesn't change the behaviour at all.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per comments received, alter the GFS2 direct I/O path so that
it uses the standard read functions "out of the box". Needs a
small change to one of the VFS functions. This reduces the size
of the code quite a lot and also removes the need for one new export.
Some more work remains to be done, but this is the bones of the
thing.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
traced the "umount hang due to spurious glock" issue that I was having
with gfs2meta. It's in the do_gfs2_set_flags function, which does a
gfs2_holder_init as well as a gfs2_glock_nq_init (increases ref count by
2 instead of 1).
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Typo causes the error value from the wrong lock to be checked.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix an endian coversion bug in log.c spotted by Kevin Anderson.
Cc: Kevin Anderson <kanderso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a use after free bug in dir.c spotted by Kevin Anderson.
Cc: Kevin Anderson <kanderso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Update the NFS filehandles so that they contain the file type.
Signed-off-by: Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
A missing initialisation when creating a new on disk inode.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We must not call GFP_KERNEL memory allocations while we
are holding the log lock (read or write) since that may
trigger a log flush resulting in a deadlock.
Eventually we need to fix the locking in log.c, for now
this solves the problem at the expense of freeing up memory
as fast as we would like to. This needs to be revisited
later on.
Cc: Kevin Anderson <kanderso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds a generation number for the eventual use of NFS to the
ondisk inode. Its backward compatible with the current code since
it doesn't really matter what the generation number is to start with,
and indeed since its set to zero, due to it being taken from padding
in both the inode and rgrp header, it should be fine.
The eventual plan is to use this rather than no_formal_ino in the
NFS filehandles. At that point no_formal_ino will be unused.
At the same time we also add a releasepages call back to the
"normal" address space for gfs2 inodes. Also I've removed a
one-linrer function thats not required any more.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a bug where we were releasing a page incorrectly
sometimes when reading a stuffed file. This fixes the bug
that Kevin reported when using Xen.
Cc: Kevin Anderson <kanderso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This really is the correct fix this time. We just ignore all
glocks associated with inodes until the inodes are pushed
from the inode cache. At that point the glocks are queued for
reclaim, so we don't need to do it here.
Also fix one or two other minor bugs.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Under certain circumstances the glock scanning logic would
demote locks which ought not to have been selected for
demotion.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Change our one existing old-style lock initialiser to a new-style
one. This allows the lock validator to work as intended.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Update GFS2 for dhowells API changes.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This removes the call in GFS2 to tty_write_message and replaces
it with a printk. As the export was added by GFS2, we remove this
as well.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This removes one instance of GFP_NOFAIL from the glock callback
function. It also fixes a bug where a , was used at a line end
rather than ; causing unintended results.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Don't use a wrapper for generic_file_sendfile but call it
directly.
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
List new development mailing list and correct web page url.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch makes the following needlessly global code static:
- eaops.c: struct gfs2_security_eaops
- rgrp.c: gfs2_free_uninit_di()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_repermission is just a wrapper for permission, so remove it and
call permission directly where required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The rename inode operation was trying to lock the same
inode twice in the case of renaming with the source
and destination directories the same. We now test for
this and just lock once.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Nick Piggin's comments on lkml, remove the unused ra_state
variable.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
fs/gfs2/locking/dlm/thread.c: In function ‘process_complete’:
fs/gfs2/locking/dlm/thread.c:56: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘uint64_t’
fs/gfs2/locking/dlm/thread.c:69: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 4 has type ‘uint64_t’
fs/gfs2/locking/dlm/thread.c:102: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘uint64_t’
fs/gfs2/locking/dlm/thread.c:124: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 4 has type ‘uint64_t’
fs/gfs2/locking/dlm/thread.c:146: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 4 has type ‘uint64_t’
fs/gfs2/locking/dlm/thread.c:148: warning: format ‘%llx’ expects type ‘long long unsigned int’, but argument 4 has type ‘uint64_t’
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
fs/gfs2/glock.c: In function ‘gfs2_holder_get’:
fs/gfs2/glock.c:439: warning: passing argument 2 of ‘set_bit’ from incompatible pointer type
fs/gfs2/glock.c: In function ‘rq_promote’:
fs/gfs2/glock.c:512: warning: passing argument 2 of ‘set_bit’ from incompatible pointer type
fs/gfs2/glock.c:526: warning: passing argument 2 of ‘set_bit’ from incompatible pointer type
...
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Include the glock in the transaction, even when not journaling
data in order that ordered write data will be correctly flushed
when the lock is released.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes the way we have been dealing with unlinked,
but still open files. It removes all limits (other than memory
for inodes, as per every other filesystem) on numbers of these
which we can support on GFS2. It also means that (like other
fs) its the responsibility of the last process to close the file
to deallocate the storage, rather than the person who did the
unlinking. Note that with GFS2, those two events might take place
on different nodes.
Also there are a number of other changes:
o We use the Linux inode subsystem as it was intended to be
used, wrt allocating GFS2 inodes
o The Linux inode cache is now the point which we use for
local enforcement of only holding one copy of the inode in
core at once (previous to this we used the glock layer).
o We no longer use the unlinked "special" file. We just ignore it
completely. This makes unlinking more efficient.
o We now use the 4th block allocation state. The previously unused
state is used to track unlinked but still open inodes.
o gfs2_inoded is no longer needed
o Several fields are now no longer needed (and removed) from the in
core struct gfs2_inode
o Several fields are no longer needed (and removed) from the in core
superblock
There are a number of future possible optimisations and clean ups
which have been made possible by this patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The caller ensures that ea_list_i() is never called with an
invalid type, so lets BUG() if we see one. This clears up
a couple of compiler warnings too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We can reclaim some space by moving fields in some structures
in order to allow them to pack better on 64 bit architectures.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This should fix the mount problems with gfs2 and selinux.
Signed-off-by: Ryan O'Hara <rohara@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds support to GFS2 for selinux extended attributes. There is a
known bug in gfs2_ea_get() which is believed to be independant of this
patch. Further patches will follow once that bug is fixed in order to
make GFS2 use as much of the generic eattr infrastructure as possible.
Signed-off-by: Ryan O'Hara <rohara@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Setup the lock_dlm kobject before setting up the dlm lockspace instead
of after. We want to use the sysfs files to detect the mount without
having to wait for the dlm setup which can take a while.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds some extra debugging to glock.c and changes
inode.c's deallocation code to call the debugging code
at a suitable moment. I'm chasing down a particular bug
to do with deallocation at the moment and the code can
go again once the bug is fixed.
Also this includes the first part of some changes to unify
the Linux struct inode and GFS2's struct gfs2_inode. This
transformation will happen in small parts over the next short
period.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We no longer use semaphores, everything has been converted to
mutex or rwsem, so we don't need to include this header any more.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch drops the log spinlock when an I/O error occurs
to avoid any possible problems in case of blocking or
recursion in the I/O error routine. It also has a few
cosmetic changes to tidy up various other files.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since they are small and will be inlined by the complier,
it makes sense to merge the contents of bits.[ch] into
rgrp.c
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The ref count of certain glock's got elevated too far during unlink
which caused umount to fail. This fixes it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The attributes logic for immutable was wrong so that there was
not way to remove this attribute once set. This fixes the
bug.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The gh_owner field shouldn't be set or reset outside the glock code.
These were left over from when recursive locking was allowed. It
isn't any more, so they are not needed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The original code ordered the blocks allocated in the build_height
routine backwards causing excessive disk seeks during a read of the
metadata. This patch reverses the order to try and reduce disk seeks.
Example: A five level metadata tree, I = Inode, P = Pointers, D = Data
You need to read the blocks in the order:
I P5 P4 P3 P2 P1 D
in order to read a single data block. The new code now orders the blocks
in this way. The old code used to order them as:
I P1 P2 P3 P4 P5 D
requiring two extra seeks on average. Note that for files which are
grown by gradual extension rather than by truncate or by llseek/write
at a large offset, this doesn't apply. In the case of writing to a
file linearly, this routine will only be called upon to extend the
height of the tree by one block at a time, so the ordering is
determined by when its called rather than by the internals of the
routine itself. Optimising that part of the ordering is a much
harder problem.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds readpages support (and also corrects a small bug in
the readpage error path at the same time). Hopefully this will
improve performance by allowing GFS to submit larger lumps of
I/O at a time.
In order to simplify the setting of BH_Boundary, it currently gets
set when we hit the end of a indirect pointer block. There is
always a boundary at this point with the current allocation code.
It doesn't get all the boundaries right though, so there is still
room for improvement in this.
See comments in fs/gfs2/ops_address.c for further information about
readpages with GFS2.
Signed-off-by: Steven Whitehouse
Well, I managed to track down the bug in gfs2 that was causing
my grief. Below is a patch for the problem. Please incorporate
as you see fit. Or should I say: as you see git.
The problem was basically that you never set d_ops for the root
inode, so the wrong hash algorithm was being used. But only for
the root directory. Turns out that if I used subdirectories, it
used the proper hash and my files were found just fine.
Signed-off-by: Robert S Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As pointed out by Wendy Cheng, the logic in GFS2's writepage() function
wasn't quite right with respect to invalidating pages when a file has been
truncated. This patch fixes that.
CC: Wendy Cheng <wcheng@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 unused functions
- remove the following global function that was both unused and
unimplemented:
- super.c: gfs2_do_upgrade()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Despite my earlier careful search, there was a recursive lock left
in the deallocation code. This removes it. It also should speed up
deallocation be reducing the number of locking operations which take
place by using two "try lock" operations on the two locks involved in
inode deallocation which allows us to grab the locks out of order
(compared with NFS which grabs the inode lock first and the iopen
lock later). It is ok for us to fail while doing this since if it
does fail it means that someone else is still using the inode and
thus it wouldn't be possible to deallocate anyway.
This fixes the bug reported to me by Rob Kenna.
Cc: Rob Kenna <rkenna@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This saves the journal recovery result and makes it visible through sysfs.
User space needs to know if the node actually recovered the journal or
tried and gave up.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch changes the last user of recursive locking so that
it no longer needs this feature and removes it from the glock
layer. This makes the glock code a lot simpler and easier to
understand. Its also a prerequsite to adding support for the
AOP_TRUNCATED_PAGE return code (or at least it is if you don't
want your brain to melt in the process)
I've left in a couple of checks just in case there is some place
else in the code which is still using this feature that I didn't
spot yet, but they can probably be removed long term.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We don't need the inherited flags since this action can be
implied by setting the flags on directories where they
wouldn't otherwise make sense. It reduces the number of extra
flags by two. Also updated the list of flags to take account of
one extra ext2/3 flag.
Cc: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Remove select of SYSFS as requested by Greg KH. Change whitespace to
tabs rather than spaces in places where it was incorrect and removed
'default m' as suggested by Adrian Bunk.
Reorganised Makefile as suggested by Sam Ravnborg.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As per Andrew Morton's comments, remove uneeded casts and use
wait_event_interruptible() rather than open code the wait.
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
1. Comment whitespace fix
2. Removed unused header files from dir.c
3. Split the gfs2_dir_get_buffer() function into two functions
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In order to make the file and line number reporting work
correctly, this has been moved back into the header file.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is one of the changes related to journal recovery I mentioned a
couple weeks ago. We can get into a situation where there are only
readonly nodes currently mounting the fs, but there are journals that need
to be recovered. Since the readonly nodes can't recover journals, the
next rw mounter needs to go through and check all journals and recover any
that are dirty (i.e. what the first node to mount the fs does). This rw
mounter needs to skip the journals held by the existing readonly nodes.
Skipping those journals amounts to using the TRY flag on the journal locks
so acquiring the lock of a journal held by a readonly node will fail
instead of blocking indefinately.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
At some stage, a mutex was added to gfs2_glock_put() without
checking all its call sites. Two of them were called from
under a spinlock causing random delays at various points and
crashes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When allocating memory to sort directory entries, use vmalloc()
rather than kmalloc() since for larger directories, the required
size can easily be graeter than the 128k maximum of kmalloc().
Also adding the first steps towards getting the AOP_TRUNCATED_PAGE
return code get in the glock code by flagging all places where we
request a glock and we are holding a page lock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
A typo in the directory code was causing postmark to fail
somewhere in the allocation code, since it was unable to
find newly allocated directory leaf blocks under certain
circumstances.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
A small update to the journaling code to change the way that
the "extra" blocks are accounted for in the journal. These are
used at a rate of one per 503 metadata blocks or one per 251
journaled data blocks (or just one if the total number of journaled
blocks in the transaction is smaller). Since we are using them at
two different rates the old method of accounting for them no longer
works and we count them up as required.
Since the "per transaction" accounting can't handle this (there is no
fixed number of header blocks per transaction) we have to account for
it in the general journal code. We now require that each transaction
reserves more blocks than it actually needs to take account of the
possible extra blocks.
Also a final fix to dir.c to ensure that all ref counts are handled
correctly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The last patch missed some other instances of incorrect ref counting,
this fixes all of those too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a ref count bug that sometimes showed up a umount time
(causing it to hang) but it otherwise mostly harmless. At the same
time there are some clean ups including making the log operations
structures const, moving a memory allocation so that its not done
in the fast path of checking to see if there is an outstanding
transaction related to a particular glock.
Removes the sd_log_wrap varaible which was updated, but never actually
used anywhere. Updates the gfs2 ioctl() to run without the kernel lock
(which it never needed anyway). Removes the "invalidate inodes" loop
from GFS2's put_super routine. This is done in kill super anyway so
we don't need to do it here. The loop was also bogus in that if there
are any inodes "stuck" at this point its a bug and we need to know
about it rather than hide it by hanging forever.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This puts the finishing touches to the ioctl support and also
removes a couple of unused fields from GFS2's private per file
structure.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Some interfaces have changed. In particular one of the posix
locking functions has changed prototype, along with the
address space operation invalidatepage and the block getting
callback to the direct IO function.
In addition add the splice file operations. These will need to
be updated to support AOP_TRUNCATED_PAGE before they will be
of much use to us.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is designed as a fs independent way to set flags on a
particular inode. The values of the ioctl() and flags are
designed to be identical to the ext2/3 values. Assuming that
this plan is acceptable to people in general, the plan is to
then move other fs across to using the same set of #defines,
etc.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Update the debugging code in trans.c and at the same time improve
the debugging code for gfs2_holders. The new code should be pretty
fast during the normal case and provide just as much information
in case of errors (or more).
One small function from glock.c has moved to glock.h as a static inline so
that its return address won't get in the way of the debugging.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Replace the lock_for_trans()/lock_for_flush() functions with an rwsem.
In fact the sd_log_flush_lock becomes an rwsem (the write part of it)
and is extended slightly to cover everything that the lock_for_flush()
used to cover. The read part of the lock is instead of lock_for_trans().
This corrects the races in the original code and reduces the code size.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Look for "nodir" in the hostdata mount option which is used to
set the NODIR flag in dlm_new_lockspace().
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This reduces the size of the directory code by about 3k and gets
readdir() to use the functions which were introduced in the previous
directory code update.
Two memory allocations are merged into one. Eliminates zeroing of some
buffers which were never used before they were initialised by
other data.
There is still scope for further improvement in the directory code.
On the logging side, a hand created mutex has been replaced by a
standard Linux mutex in the log allocation code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The various flags on inodes will in future be set and queried
via the extended attributes interface, so this interface is no
longer required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Due to a typo, the dir leaf split operation was (for the first
split in a directory) writing the new hash vaules at the
wrong offset. This is now fixed.
Also some other tidy ups are included:
- We use GFS2's hash function for dentries (see ops_dentry.c) so that
we don't have to keep recalculating the hash values.
- A lot of common code is eliminated between the various directory
lookup routines.
- Better error checking on directory lookup (previously different
routines checked for different errors)
- The leaf split operation has a couple of redundant operations
removed from it, so it should be faster.
There is still further scope for further clean ups in the directory
code, and readdir in particular could do with slimming down a bit.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In order to separate out the filesystem's metadata from "normal"
files and directories, a new filesystem type has been created.
It is called gfs2meta and mounting it gives access to the files
that were previously under .gfs2_admin (well still are until mkfs
is altered, which is next on the adgenda).
Its not currently possible to mount both gfs2 and gfs2meta on the
same block device at the same time. A future patch will allow that
to happen.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a bug I introduced earlier with a kfree() and usage of
a structure in the wrong order. Also try and get the counts
of the journaled data buffers "more correct". Still some work
to do in this area though.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We no longer lookup ".gfs2_admin" in the root directory in order to
find it, but instead use the inode number given in the superblock.
Both the root directory and the admin directory are now looked up using
the same routine, so the redundant code is removed.
Also, there is no longer a reference to the root inode in the
GFS2 super block. When required this can be retreived via
sb->s_root->d_inode instead.
Assuming that we introduce a metadata filesystem type for GFS, then
this is a first step towards that goal.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
For every filesystem operation where we need a transaction, we
now make one less memory allocation.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As suggested by Pekka Enberg <penberg@cs.helsinki.fi>.
The DIV_RU macro is renamed DIV_ROUND_UP and and moved to kernel.h
The other macros are gone from gfs2.h as (although not requested
by Pekka Enberg) are a number of included header file which are now
included individually. The inode number comparison function is
now an inline function.
The DT2IF and IF2DT may be addressed in a future patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As requested by:
Pavel Machek <pavel@suse.cz>
Pavel's other comments will be dealt with in later patches.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
All printk calls now have KERN_ set where required and a couple of
kmalloc(), memset(.., 0, ...) calls changed to kzalloc().
This is in response to comments from:
Pekka Enberg <penberg@cs.helsinki.fi> and
Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is the second of two patches removing support for range
locks from the DLM
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Heinz had spotted that I'd forgotten to test in databuf_lo_add()
that the data buffer in question hadn't already been added to
the list. This was causing an infinite loop later on in the
"before commit" routine.
This means that GFS2 is now ready to be tested by everybody.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
As well as a number of minor bug fixes, this patch changes GFS
to use mutices rather than semaphores. This results in better
information in case there are any locking problems.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There was a bug in the unstuffing logic which caused a crash
under certain circumstances. This is now fixed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Two internal files which are read through the gfs2_internal_read()
routine were already locked when the routine was called and this
do not need locking at the redapages level.
This patch introduces a struct file which is used as a sentinal
so that readpage will only perform locking in the case that the
struct file passed to it is _not_ equal to this sentinal.
Since the comments in the generic kernel code indicate that the
struct file will never be used for anything other than passing
straight through to readpage(), this should be ok.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds back O_DIRECT support with various caveats
attached:
1. Journaled data can be read via O_DIRECT since its now the
same on disk format as normal data files.
2. Journaled data writes with O_DIRECT will be failed sliently
back to normal writes (should we really do this I wonder or
should we return an error instead?)
3. Stuffed files will be failed back to normal buffered I/O
4. All the usual corner cases (write beyond current end of file,
write to an unallocated block) will also revert to normal buffered I/O.
The I/O path is slightly odd as reads arrive at the page cache layer
with the lock for the file already held, but writes arrive unlocked.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There were one or two fields in structures which didn't get changed
last time back to their gfs1 sizes and alignments. One or two constants
have also changed back to their original values which were missed the
first time.
Its possible that indirect pointer blocks might need to change. If
they don't we'll have to rewrite them all on upgrade due to a change
in the amount of padding that they use.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Umount is now working correctly again. The bug was due to
not getting an extra ref count when mounting the fs. We
should have bumped it by two (once for the internal pointer
to the root inode from the super block and once for the
inode hanging off the dcache entry for root).
Also this patch tidys up the code dealing with looking up
and creating inodes. We now pass Linux inodes (with gfs2_inodes
attached) rather than the other way around and this reduces code
duplication in various places.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a very large patch, with a few still to be resolved issues
so you might want to check out the previous head of the tree since
this is known to be unstable. Fixes for the various bugs will be
forthcoming shortly.
This patch removes the special data format which has been used
up till now for journaled data files. Directories still retain the
old format so that they will remain on disk compatible with earlier
releases. As a result you can now do the following with journaled
data files:
1) mmap them
2) export them over NFS
3) convert to/from normal files whenever you want to (the zero length
restriction is gone)
In addition the level at which GFS' locking is done has changed for all
files (since they all now use the page cache) such that the locking is
done at the page cache level rather than the level of the fs operations.
This should mean that things like loopback mounts and other things which
touch the page cache directly should now work.
Current known issues:
1. There is a lock mode inversion problem related to the resource
group hold function which needs to be resolved.
2. Any significant amount of I/O causes an oops with an offset of hex 320
(NULL pointer dereference) which appears to be related to a journaled data
buffer appearing on a list where it shouldn't be.
3. Direct I/O writes are disabled for the time being (will reappear later)
4. There is probably a deadlock between the page lock and GFS' locks under
certain combinations of mmap and fs operation I/O.
5. Issue relating to ref counting on internally used inodes causes a hang
on umount (discovered before this patch, and not fixed by it)
6. One part of the directory metadata is different from GFS1 and will need
to be resolved before next release.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Update the function in GFS2 which deals with truncation of
partial blocks. Some of the code is "borrowed" from ext3
since it appears to give a good model of how to do this
operation. The function is renamed gfs2_block_truncate_page
accordingly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Add the new external read function. Its temporarily in jdata.c
even though the protoype is in ops_file.h - this will change
shortly. The current implementation will change to a page cache
one when that happens.
In order to effect the above changes, the various internal inodes
now have Linux inodes attached to them. We keep the references to
the Linux inodes, rather than the gfs2_inodes in the super block.
In order to get everything to work correctly I've had to reorder
the init sequence on mount (which I should probably have done
earlier when .gfs2_admin was made visible).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Copy & rename various jdata functions into dir.c. The plan
being that directory metadata format will not change although
the journalled data format for "normal" files will change.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The code in this file is no longer used as the rindex file is
now accessible to userspace, so can be read/written directly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
For some reason a function pointer was being passed through
the truncate code which only ever took one value. This removes
the function pointer and replaces it with a single call to
the function in question.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since we'll need to pin data if we are going to journal it, then
I'm renaming this function to make it less confusing. It might also
be worth moving it into lops.c since there are no users outside that
file.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
I'd like to be rid of these memory allocations entirely so far as is
possible. For the moment though, mark them GFP_NOFS to make them less
harmful.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Removing the gfs2_databuf structure and using gfs2_bufdata instead
is a step towards allowing journaling of data without requiring the
metadata header on each journaled block. The idea is to merge the
code paths for ordered data with that of journaled data, with the
log operations in lops.c tacking account of the different types of
buffers as they are presented to it. Largely the code path for
metadata will be similar too, but obviously through a different set
of log operations.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Passes the flag through to ensure that the correct log operations are
invoked when the flag is set.
Signed-off-by: Steven Whitehouse: <swhiteho@redhat.com>
This adds an extra argument to gfs2_trans_add_bh() to indicate whether the
bh being added to the transaction is metadata or data. Its currently unused
since all existing callers set it to 1 (metadata) but following patches will
make use of it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We no longer allocate a dinode on the stack in init_dinode()
and we no longer use gfs2_dinode_out (eliminating one copy) and
gfs2_meta_header_in (eliminating another copy). The meta_header_in
fucntion is now no longer referenced from outside gfs2_ondisk.c, so
make it static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Update the dlm interface module to take account of the recently
removed third argument to kobject_uevent()
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
This brings the lock modules uptodate and removes the stray
.mod.c file which accidently got included in the last check in.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch contains the pluggable locking modules
for GFS2.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch contains all the core files for GFS2.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>