openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
455,644 Commits 18 Branches 27 Tags 3.4 GiB
Commit Graph

9 Commits

Author SHA1 Message Date
Sergey Senozhatsky 56b4e8cb85 zram: use scnprintf() in attrs show() methods 
sysfs.txt documentation lists the following requirements:

 - The buffer will always be PAGE_SIZE bytes in length. On i386, this
   is 4096.

 - show() methods should return the number of bytes printed into the
   buffer. This is the return value of scnprintf().

 - show() should always use scnprintf().

Use scnprintf() in show() functions.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:02 -07:00
Minchan Kim 60a726e333 zram: propagate error to user 
When we initialized zcomp with single, we couldn't change
max_comp_streams without zram reset but current interface doesn't show
any error to user and even it changes max_comp_streams's value without
any effect so it would make user very confusing.

This patch prevents max_comp_streams's change when zcomp was initialized
as single zcomp and emit the error to user(ex, echo).

[akpm@linux-foundation.org: don't return with the lock held, per Sergey]
[fengguang.wu@intel.com: fix coccinelle warnings]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:02 -07:00
Sergey Senozhatsky fcfa8d95ca zram: return error-valued pointer from zcomp_create() 
Instead of returning just NULL, return ERR_PTR from zcomp_create() if
compressing backend creation has failed.  ERR_PTR(-EINVAL) for unsupported
compression algorithm request, ERR_PTR(-ENOMEM) for allocation (zcomp or
compression stream) error.

Perform IS_ERR() check of returned from zcomp_create() value in
disksize_store() and set return code to PTR_ERR().

Change suggested by Jerome Marchand.

[akpm@linux-foundation.org: clean up error recovery flow]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:02 -07:00
Sergey Senozhatsky 6e76668e41 zram: add lz4 algorithm backend 
Introduce LZ4 compression backend and make it available for selection.
LZ4 support is optional and requires user to set ZRAM_LZ4_COMPRESS config
option.  The default compression backend is LZO.

TEST

(x86_64, core i5, 2 cores + 2 hyperthreading, zram disk size 1G,
ext4 file system, 3 compression streams)

iozone -t 3 -R -r 16K -s 60M -I +Z

       Test           LZO           LZ4
----------------------------------------------
  Initial write   1642744.62    1317005.09
        Rewrite   2498980.88    1800645.16
           Read   3957026.38    5877043.75
        Re-read   3950997.38    5861847.00
   Reverse Read   2937114.56    5047384.00
    Stride read   2948163.19    4929587.38
    Random read   3292692.69    4880793.62
 Mixed workload   1545602.62    3502940.38
   Random write   2448039.75    1758786.25
         Pwrite   1670051.03    1338329.69
          Pread   2530682.00    5097177.62
         Fwrite   3232085.62    3275942.56
          Fread   6306880.25    6645271.12

So on my system LZ4 is slower in write-only tests, while it performs
better in read-only and mixed (reads + writes) tests.

Official LZ4 benchmarks available here http://code.google.com/p/lz4/
(linux kernel uses revision r90).

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:01 -07:00
Sergey Senozhatsky e46b8a030d zram: make compression algorithm selection possible 
Add and document `comp_algorithm' device attribute.  This attribute allows
to show supported compression and currently selected compression
algorithms:

	cat /sys/block/zram0/comp_algorithm
	[lzo] lz4

and change selected compression algorithm:
	echo lzo > /sys/block/zram0/comp_algorithm

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:01 -07:00
Sergey Senozhatsky fe8eb122c8 zram: add set_max_streams knob 
This patch allows to change max_comp_streams on initialised zcomp.

Introduce zcomp set_max_streams() knob, zcomp_strm_multi_set_max_streams()
and zcomp_strm_single_set_max_streams() callbacks to change streams limit
for zcomp_strm_multi and zcomp_strm_single, accordingly.  set_max_streams
for single steam zcomp does nothing.

If user has lowered the limit, then zcomp_strm_multi_set_max_streams()
attempts to immediately free extra streams (as much as it can, depending
on idle streams availability).

Note, this patch does not allow to change stream 'policy' from single to
multi stream (or vice versa) on already initialised compression backend.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:01 -07:00
Sergey Senozhatsky beca3ec71f zram: add multi stream functionality 
Existing zram (zcomp) implementation has only one compression stream
(buffer and algorithm private part), so in order to prevent data
corruption only one write (compress operation) can use this compression
stream, forcing all concurrent write operations to wait for stream lock
to be released.  This patch changes zcomp to keep a compression streams
list of user-defined size (via sysfs device attr).  Each write operation
still exclusively holds compression stream, the difference is that we
can have N write operations (depending on size of streams list)
executing in parallel.  See TEST section later in commit message for
performance data.

Introduce struct zcomp_strm_multi and a set of functions to manage
zcomp_strm stream access.  zcomp_strm_multi has a list of idle
zcomp_strm structs, spinlock to protect idle list and wait queue, making
it possible to perform parallel compressions.

The following set of functions added:
- zcomp_strm_multi_find()/zcomp_strm_multi_release()
  find and release a compression stream, implement required locking
- zcomp_strm_multi_create()/zcomp_strm_multi_destroy()
  create and destroy zcomp_strm_multi

zcomp ->strm_find() and ->strm_release() callbacks are set during
initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release()
correspondingly.

Each time zcomp issues a zcomp_strm_multi_find() call, the following set
of operations performed:

- spin lock strm_lock
- if idle list is not empty, remove zcomp_strm from idle list, spin
  unlock and return zcomp stream pointer to caller
- if idle list is empty, current adds itself to wait queue. it will be
  awaken by zcomp_strm_multi_release() caller.

zcomp_strm_multi_release():
- spin lock strm_lock
- add zcomp stream to idle list
- spin unlock, wake up sleeper

Minchan Kim reported that spinlock-based locking scheme has demonstrated
a severe perfomance regression for single compression stream case,
comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16)

base                      spinlock                    mutex

==Initial write           ==Initial write             ==Initial  write
records:  5               records:  5                 records:   5
avg:      1642424.35      avg:      699610.40         avg:       1655583.71
std:      39890.95(2.43%) std:      232014.19(33.16%) std:       52293.96
max:      1690170.94      max:      1163473.45        max:       1697164.75
min:      1568669.52      min:      573429.88         min:       1553410.23
==Rewrite                 ==Rewrite                   ==Rewrite
records:  5               records:  5                 records:   5
avg:      1611775.39      avg:      501406.64         avg:       1684419.11
std:      17144.58(1.06%) std:      15354.41(3.06%)   std:       18367.42
max:      1641800.95      max:      531356.78         max:       1706445.84
min:      1593515.27      min:      488817.78         min:       1655335.73

When only one compression stream available, mutex with spin on owner
tends to perform much better than frequent wait_event()/wake_up().  This
is why single stream implemented as a special case with mutex locking.

Introduce and document zram device attribute max_comp_streams.  This
attr shows and stores current zcomp's max number of zcomp streams
(max_strm).  Extend zcomp's zcomp_create() with `max_strm' parameter.
`max_strm' limits the number of zcomp_strm structs in compression
backend's idle list (max_comp_streams).

max_comp_streams used during initialisation as follows:
-- passing to zcomp_create() max_strm equals to 1 will initialise zcomp
using single compression stream zcomp_strm_single (mutex-based locking).
-- passing to zcomp_create() max_strm greater than 1 will initialise zcomp
using multi compression stream zcomp_strm_multi (spinlock-based locking).

default max_comp_streams value is 1, meaning that zram with single stream
will be initialised.

Later patch will introduce configuration knob to change max_comp_streams
on already initialised and used zcomp.

TEST
iozone -t 3 -R -r 16K -s 60M -I +Z

       test           base       1 strm (mutex)     3 strm (spinlock)
-----------------------------------------------------------------------
 Initial write      589286.78       583518.39          718011.05
       Rewrite      604837.97       596776.38         1515125.72
  Random write      584120.11       595714.58         1388850.25
        Pwrite      535731.17       541117.38          739295.27
        Fwrite     1418083.88      1478612.72         1484927.06

Usage example:
set max_comp_streams to 4
        echo 4 > /sys/block/zram0/max_comp_streams

show current max_comp_streams (default value is 1).
        cat /sys/block/zram0/max_comp_streams

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:01 -07:00
Sergey Senozhatsky 9cc97529a1 zram: factor out single stream compression 
This is preparation patch to add multi stream support to zcomp.

Introduce struct zcomp_strm_single and a set of functions to manage
zcomp_strm stream access.  zcomp_strm_single implements single compession
stream, same way as current zcomp implementation.  This moves zcomp_strm
stream control and locking from zcomp, so compressing backend zcomp is not
aware of required locking.

Single and multi streams require different locking schemes.  Minchan Kim
reported that spinlock-based locking scheme (which is used in multi stream
implementation) has demonstrated a severe perfomance regression for single
compression stream case, comparing to mutex-based.  see
https://lkml.org/lkml/2014/2/18/16

The following set of functions added:
- zcomp_strm_single_find()/zcomp_strm_single_release()
  find and release a compression stream, implement required locking
- zcomp_strm_single_create()/zcomp_strm_single_destroy()
  create and destroy zcomp_strm_single

New ->strm_find() and ->strm_release() callbacks added to zcomp, which are
set to zcomp_strm_single_find() and zcomp_strm_single_release() during
initialisation.  Instead of direct locking and zcomp_strm access from
zcomp_strm_find() and zcomp_strm_release(), zcomp now calls ->strm_find()
and ->strm_release() correspondingly.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:01 -07:00
Sergey Senozhatsky e7e1ef439d zram: introduce compressing backend abstraction 
ZRAM performs direct LZO compression algorithm calls, making it the one
and only option.  While LZO is generally performs well, LZ4 algorithm
tends to have a faster decompression (see http://code.google.com/p/lz4/
for full report)

	Name            Ratio  C.speed D.speed
	                        MB/s    MB/s
	LZ4 (r101)      2.084    422    1820
	LZO 2.06        2.106    414     600

Thus, users who have mostly read (decompress) usage scenarious or mixed
workflow (writes with relatively high read ops number) will benefit from
using LZ4 compression backend.

Introduce compressing backend abstraction zcomp in order to support
multiple compression algorithms with the following set of operations:

        .create
        .destroy
        .compress
        .decompress

Schematically zram write() usually contains the following steps:
0) preparation (decompression of partioal IO, etc.)
1) lock buffer_lock mutex (protects meta compress buffers)
2) compress (using meta compress buffers)
3) alloc and map zs_pool object
4) copy compressed data (from meta compress buffers) to object allocated by 3)
5) free previous pool page, assign a new one
6) unlock buffer_lock mutex

As we can see, compressing buffers must remain untouched from 1) to 4),
because, otherwise, concurrent write() can overwrite data.  At the same
time, zram_meta must be aware of a) specific compression algorithm memory
requirements and b) necessary locking to protect compression buffers.  To
remove requirement a) new struct zcomp_strm introduced, which contains a
compress/decompress `buffer' and compression algorithm `private' part.
While struct zcomp implements zcomp_strm stream handling and locking and
removes requirement b) from zram meta.  zcomp ->create() and ->destroy(),
respectively, allocate and deallocate algorithm specific zcomp_strm
`private' part.

Every zcomp has zcomp stream and mutex to protect its compression stream.
Stream usage semantics remains the same -- only one write can hold stream
lock and use its buffers.  zcomp_strm_find() turns caller into exclusive
user of a stream (holding stream mutex until zram release stream), and
zcomp_strm_release() makes zcomp stream available (unlock the stream
mutex).  Hence no concurrent write (compression) operations possible at
the moment.

iozone -t 3 -R -r 16K -s 60M -I +Z

       test            base           patched
--------------------------------------------------
  Initial write      597992.91       591660.58
        Rewrite      609674.34       616054.97
           Read     2404771.75      2452909.12
        Re-read     2459216.81      2470074.44
   Reverse Read     1652769.66      1589128.66
    Stride read     2202441.81      2202173.31
    Random read     2236311.47      2276565.31
 Mixed workload     1423760.41      1709760.06
   Random write      579584.08       615933.86
         Pwrite      597550.02       594933.70
          Pread     1703672.53      1718126.72
         Fwrite     1330497.06      1461054.00
          Fread     3922851.00      3957242.62

Usage examples:

	comp = zcomp_create(NAME) /* NAME e.g. "lzo" */

which initialises compressing backend if requested algorithm is supported.

Compress:
	zstrm = zcomp_strm_find(comp)
	zcomp_compress(comp, zstrm, src, &dst_len)
	[..] /* copy compressed data */
	zcomp_strm_release(comp, zstrm)

Decompress:
	zcomp_decompress(comp, src, src_len, dst);

Free compessing backend and its zcomp stream:
	zcomp_destroy(comp)

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-04-07 16:36:01 -07:00