Commit Graph

6 Commits

Author SHA1 Message Date
Jason Yan f585c9d543 platform/x86/intel-uncore-freq: make uncore_root_kobj static
Fix the following sparse warning:

drivers/platform/x86/intel-uncore-frequency.c:56:16: warning: symbol
'uncore_root_kobj' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-04-17 16:48:06 +03:00
Linus Torvalds dba43fc4ba platform-drivers-x86 for v5.7-1
* Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops.
 * On newer ASUS laptops the 1st battery is named differently, here is a fix.
 * Fix Lex 2I385SW to allow both network cards to be used.
 * The power integrated circuit driver for Surface 3 has been added.
 * Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake.
 * Clean up of Dell RBU driver.
 * Big update for Intel Speed Select technology support tool and driver.
 
 The following is an automated git shortlog grouped by driver:
 
 asus-wmi:
  -  Support laptops where the first battery is named BATT
  -  Fix return value of fan_boost_mode_store
 
 dell_rbu:
  -  Unify format of the printed messages
  -  Use max_t() to get rid of casting
  -  Simplify cleanup code in create_packet()
  -  don't open code list_for_each_entry*()
  -  Use sysfs_create_group() API
 
 GPD pocket fan:
  -  Fix error message when temp-limits are out of range
 
 i2c-multi-instantiate:
  -  Replace zero-length array with flexible-array member
 
 intel-hid:
  -  Move MODULE_DEVICE_TABLE() closer to the table
 
 intel_pmc_core:
  -  Make pmc_core_substate_res_show() generic
  -  Make pmc_core_lpm_display() generic for platforms that support sub-states
  -  Add slp_s0_offset attribute back to tgl_reg_map
  -  Remove duplicate 'if' to create debugfs entry
  -  Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS
  -  Add debugfs support to access live status registers
  -  Dump low power status registers on an S0ix.y failure
  -  Add an additional parameter to pmc_core_lpm_display()
  -  Remove slp_s0 attributes from tgl_reg_map
  -  Refactor the driver by removing redundant code
  -  Add debugfs entry for low power mode status registers
  -  Add debugfs entry to access sub-state residencies
  -  Add Atom based Jasper Lake (JSL) platform support
 
 intel-vbtn:
  -  Move MODULE_DEVICE_TABLE() closer to the table
 
 ISST:
  -  Fix wrong unregister type
 
 PDx86:
  -  Kconfig: Fix a typo
  -  Kconfig: Group modules by companies and functions
  -  MAINTAINERS: Sort entries in database for PDx86
  -  Makefile: Group modules by companies and functions
 
 platform/x86/intel-uncore-freq:
  -  Add release callback
  -  Fix static checker issue and potential race condition
 
 pmc_atom:
  -  Add Lex 2I385SW to critclk_systems DMI table
 
 sony-laptop:
  -  Use scnprintf() for avoiding potential buffer overflow
 
 surface3_power:
  -  Fix always true condition in mshw0011_space_handler()
  -  Fix Kconfig section ordering
  -  Add missed headers
  -  Reformat GUID assignment
  -  Drop useless macro ACPI_PTR()
  -  Prefix POLL_INTERVAL with SURFACE_3
  -  Simplify mshw0011_adp_psr() to one liner
  -  Use dev_err() instead of pr_err()
  -  Drop unused structure definition
  -  MSHW0011 rev-eng implementation
 
 tools/power/x86/intel-speed-select:
  -  Fix a typo in error message
  -  Update version
  -  Avoid duplicate Package strings for json
  -  Add display for enabled cpus count
  -  Print friendly warning for bad command line
  -  Fix avx options for turbo-freq feature
  -  Improve CLX commands
  -  Show error for invalid CPUs in the options
  -  Improve core-power result and error display
  -  Kernel interface error handling
  -  Improve error display for turbo-freq feature
  -  Improve error display for base-freq feature
  -  Improve output of perf-profile commands
  -  Enhance help for core-power assoc
  -  Display error for invalid priority type
  -  Check feature status first
  -  Improve error display for perf-profile feature
  -  Add an API for error/information print
  -  Enhance --info option
  -  Enhance help
  -  Helpful warning for missing kernel interface
  -  Store topology information
  -  Max CPU count calculation when CPU0 is offline
  -  Special handling for CPU 0 online/offline
  -  Use more verbiage for clos information
  -  Enhance core-power info command
  -  Make target CPU optional for core-power info
  -  Warn for invalid package id
  -  Fix last cpu number
  -  Fix mailbox usage for CLOS_PM_QOS_CONFIG
  -  Avoid duplicate names for json parsing
  -  Fix display for turbo-freq auto mode
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEqaflIX74DDDzMJJtb7wzTHR8rCgFAl6DMoEACgkQb7wzTHR8
 rChW3w//WgzlhbKCl3EO8WjfSGmQHwszLq/Zcj+LLzoPQOl7t1nel1cEIWv7Y4+P
 /I24l2pqAD2JRgs03hNDg9i/YovPuqhLtS7t7hDNKFfNGdOhIJQkMwhrjXcapbBj
 UgE5cFbzXjf4400Tv1EkOylIZhOlpTmv5eGk/Dbw+5adTOlTH3MYLntv8ZfBulOh
 A6Dolto+zPvrbCyrMrgJSpQRIx1Rd8JV3YDXQRTpimmdsTJ7VFC55i1RLJSQ5sGw
 rF2qAekMExKScezSV8Yy9npDGJ1qUolhj/PciLPr71rmIuWqfdqc8eLeLmsJzIfY
 WO4TIQ3CTTY1FlZsOZyoeh+Kla//hRyaUoHAU0xEWDD9xKJBdzOIMEs4O/islWYL
 ILHs7ZdZPrHFI63mxyF0Mw5SgsSG1c6VNa19+H+YxpC4Pp8hbo891RRF7+7hBbdT
 YRT5yaQMD2M8QowMgxJQ7Xt3Kyz/jRO/8L59v202v3RzJvJ0UJhT+fmHV6OSz5MD
 SLOmLsXcWvgteNxM8TQ5yxmuDJdQVRuJqQpvPhysqlUEyhoTSLsII5evu/U/jXA4
 vIx+QfUejDiy0vMeQu2xUOzxIzSzja6gLO6hKgiAw2cvUMqbOi2CIG7qwbRZkIis
 uj/GxlwiNfIsEKUE4728ivOHwT9Yke1x+QLl/oVwMh7zSgb+noE=
 =G0jF
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - Fix for improper handling of fan_boost_mode in sysfs for ASUS
   laptops.

 - On newer ASUS laptops the 1st battery is named differently, here is a
   fix.

 - Fix Lex 2I385SW to allow both network cards to be used.

 - The power integrated circuit driver for Surface 3 has been added.

 - Refactor and clean up of Intel PMC driver and enable it on Intel
   Jasper Lake.

 - Clean up of Dell RBU driver.

 - Big update for Intel Speed Select technology support tool and driver.

* tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits)
  platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler()
  platform/x86: surface3_power: Fix Kconfig section ordering
  platform/x86: surface3_power: Add missed headers
  platform/x86: surface3_power: Reformat GUID assignment
  platform/x86: surface3_power: Drop useless macro ACPI_PTR()
  platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3
  platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner
  platform/x86: surface3_power: Use dev_err() instead of pr_err()
  platform/x86: surface3_power: Drop unused structure definition
  platform/x86: surface3_power: MSHW0011 rev-eng implementation
  platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic
  platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states
  tools/power/x86/intel-speed-select: Fix a typo in error message
  tools/power/x86/intel-speed-select: Update version
  tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json
  tools/power/x86/intel-speed-select: Add display for enabled cpus count
  tools/power/x86/intel-speed-select: Print friendly warning for bad command line
  tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature
  tools/power/x86/intel-speed-select: Improve CLX commands
  tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options
  ...
2020-03-31 16:43:40 -07:00
Thomas Gleixner a69b3b1d4c platform/x86: Convert to new CPU match macros
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.

Get rid the of the local macro wrappers for consistency.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131509.766573641@linutronix.de
2020-03-24 21:33:00 +01:00
Srinivas Pandruvada ee633afded platform/x86/intel-uncore-freq: Add release callback
On module unload wait for relese callback for each packag_die entry
and then free the memory. This is done by waiting on a completion
object, till release() callback.

While here, also change to kobject_init_and_add() to
kobject_create_and_add() to simplify.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-02-28 12:44:11 +02:00
Srinivas Pandruvada 64b73cff66 platform/x86/intel-uncore-freq: Fix static checker issue and potential race condition
There is a possible race condition when:
All CPUs in a package is offlined and just before the last CPU offline,
user tries to read sysfs entry and read happens while offline callback
is about to delete the sysfs entry.

Although not reproduced but this is possible scenerio and can be
reproduced by adding a msleep() in the show_min_max_freq_khz() before
mutex_lock() and read min_freq attribute from user space. Before
msleep() finishes, force every CPUs in a package offline.

This will cause deadlock, with offline and sysfs read/write operation
because of mutex_lock. The uncore_remove_die_entry() will not release
mutex till read/write callback returns because of kobject_put() and
read/write callback waiting on mutex.

We don't have to remove the sysfs folder when the package is offline.
While there is no CPU present, we can fail the read/write calls by
returning ENXIO error. So remove the kobject_put() call in offline path.

This also address the warning from static checker, as there is no
access to "data" variable after kobject_put:
"The patch 49a474c7ba51: "platform/x86: Add support for Uncore
frequency control" from Jan 13, 2020, leads to the following static
checker warning:

        drivers/platform/x86/intel-uncore-frequency.c:285 uncore_remove_die_entry()
        error: dereferencing freed memory 'data'
"

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-02-28 12:44:11 +02:00
Srinivas Pandruvada 49a474c7ba platform/x86: Add support for Uncore frequency control
Some server users set limits on the uncore frequency using MSR 620H, while
running latency sensitive workloads. Here uncore frequency controls
RING/LLC(last-level cache) clocks.

But MSR control is not always possible from the user space, so this driver
provides a sysfs interface to set max and min frequency limits. This MSR
620H is a die scoped in multi-die system or package scoped in non multi-die
systems.

When this driver is loaded, a new directory is created under
 /sys/devices/system/cpu.

For example on a two package Skylake server:
$cd /sys/devices/system/cpu/intel_uncore_frequency

$ls
package_00_die_00 package_01_die_00

$ls package_00_die_00
max_freq_khz  min_freq_khz  initial_max_freq_khz
initial_min_freq_khz

$grep . *
    max_freq_khz:2400000
    min_freq_khz:1200000
    initial_max_freq_khz:2400000
    initial_min_freq_khz:1200000

Here, initial_max_freq_khz and initial_min_freq_khz are read only
attributes to show power up or initial values of max and min frequencies
respectively. Other attributes are read-write, so that users can modify.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13 21:02:36 +02:00