Commit Graph

124 Commits

Author SHA1 Message Date
David S. Miller 26440c835f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/asix_common.c
	net/ipv4/inet_connection_sock.c
	net/switchdev/switchdev.c

In the inet_connection_sock.c case the request socket hashing scheme
is completely different in net-next.

The other two conflicts were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20 06:08:27 -07:00
Jiri Pirko 771acac2ff switchdev: assert rtnl mutex when going over lower netdevs
netdev_for_each_lower_dev has to be called with rtnl mutex held. So
better enforce it in switchdev functions.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 06:09:53 -07:00
Jiri Pirko 4d429c5ddc switchdev: introduce possibility to defer obj_add/del
Similar to the attr usecase, the caller knows if he is holding RTNL and is
in atomic section. So let the called to decide the correct call variant.

This allows drivers to sleep inside their ops and wait for hw to get the
operation status. Then the status is propagated into switchdev core.
This avoids silent errors in drivers.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 06:09:49 -07:00
Jiri Pirko 850d0cbc91 switchdev: remove pointers from switchdev objects
When object is used in deferred work, we cannot use pointers in
switchdev object structures because the memory they point at may be already
used by someone else. So rather do local copy of the value.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 06:09:49 -07:00
Jiri Pirko 0bc05d585d switchdev: allow caller to explicitly request attr_set as deferred
Caller should know if he can call attr_set directly (when holding RTNL)
or if he has to defer the att_set processing for later.

This also allows drivers to sleep inside attr_set and report operation
status back to switchdev core. Switchdev core then warns if status is
not ok, instead of silent errors happening in drivers.

Benefit from newly introduced switchdev deferred ops infrastructure.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 06:09:48 -07:00
Jiri Pirko f7fadf3047 switchdev: make struct switchdev_attr parameter const for attr_set calls
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 06:09:46 -07:00
Jiri Pirko 793f40147e switchdev: introduce switchdev deferred ops infrastructure
Introduce infrastructure which will be used internally to defer ops.
Note that the deferred ops are queued up and either are processed by
scheduled work or explicitly by user calling deferred_process function.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 06:09:46 -07:00
Nikolay Aleksandrov 87aaf2caed switchdev: check if the vlan id is in the proper vlan range
VLANs 0 and 4095 are reserved and shouldn't be used, add checks to
switchdev similar to the bridge. Also make sure ids above 4095 cannot
be passed either.

Fixes: 47f8328bb1 ("switchdev: add new switchdev bridge setlink")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13 04:43:24 -07:00
Nikolay Aleksandrov cc02aa8e41 switchdev: enforce no pvid flag in vlan ranges
We shouldn't allow BRIDGE_VLAN_INFO_PVID flag in VLAN ranges.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Elad Raz <eladr@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13 04:41:40 -07:00
Scott Feldman 464314ea6c switchdev: skip over ports returning -EOPNOTSUPP when recursing ports
This allows us to recurse over all the ports, skipping over unsupporting
ports.  Without the change, the recursion would stop at first unsupported
port.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 05:20:20 -07:00
Jiri Pirko 9e8f4a548a switchdev: push object ID back to object structure
Suggested-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 04:49:40 -07:00
Jiri Pirko 648b4a995a switchdev: bring back switchdev_obj and use it as a generic object param
Replace "void *obj" with a generic structure. Introduce couple of
helpers along that.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 04:49:39 -07:00
Jiri Pirko 52ba57cfdc switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdb
Make the struct name in sync with object id name.

Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 04:49:39 -07:00
Jiri Pirko 8f24f3095d switchdev: rename switchdev_obj_vlan to switchdev_obj_port_vlan
Make the struct name in sync with object id name.

Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 04:49:38 -07:00
Jiri Pirko 1f86839874 switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_*
To be aligned with obj.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 04:49:37 -07:00
Jiri Pirko 57d80838da switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_*
Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03 04:49:36 -07:00
Vivien Didelot ab06900230 net: switchdev: abstract object in add/del ops
Similar to the notifier_call callback of a notifier_block, change the
function signature of switchdev add and del operations to:

    int switchdev_port_obj_add/del(struct net_device *dev,
                                   enum switchdev_obj_id id, void *obj);

This allows the caller to pass a specific switchdev_obj_* structure
instead of the generic switchdev_obj one.

Drivers implementation of these operations and switchdev have been
changed accordingly.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 21:31:59 -07:00
Vivien Didelot 25f07adc47 net: switchdev: pass callback to dump operation
Similar to the notifier_call callback of a notifier_block, change the
function signature of switchdev dump operation to:

    int switchdev_port_obj_dump(struct net_device *dev,
                                enum switchdev_obj_id id, void *obj,
                                int (*cb)(void *obj));

This allows the caller to pass and expect back a specific
switchdev_obj_* structure instead of the generic switchdev_obj one.

Drivers implementation of dump operation can now expect this specific
structure and call the callback with it. Drivers have been changed
accordingly.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 21:31:59 -07:00
Vivien Didelot 03d5fb1862 net: switchdev: remove dev from switchdev_obj cb
The net_device associated to a dump operation does not have to be passed
to the callback. switchdev stores it in a superset struct, if needed.

Also some drivers (such as DSA drivers) may not have easy access to it.

This will simplify pushing the callback function down to the drivers.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 21:31:59 -07:00
Vivien Didelot e02a06b2a7 net: switchdev: move dev in switchdev_fdb_dump
The FDB dump callback requires the related net_device so move it to the
struct switchdev_fdb_dump superset instead of using a callback param.

With this done, it'll be simpler to change the dump function signature.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 21:31:59 -07:00
Vivien Didelot e23b002b23 net: switchdev: remove dev in port_vlan_dump_put
The static switchdev_port_vlan_dump_put function does not need the
net_device parameter, so remove it.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29 21:31:59 -07:00
Jiri Pirko f623ab7f51 switchdev: reduce transaction phase enum down to a boolean
Now, since we have only 2 values for transaction phase, just use bool.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 22:59:22 -07:00
Jiri Pirko 9f6467cf22 switchdev: remove "ABORT" transaction phase
No longer used by drivers, as transaction queue with item destructors
takes care of abort phase internally in switchdev code. So kill it.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 22:59:22 -07:00
Jiri Pirko f8db83486e switchdev: move transaction phase enum under transaction structure
Before it disappears completely, move transaction phase enum under
transaction structure and make attr/obj structures a bit cleaner.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 22:59:21 -07:00
Jiri Pirko 7ea6eb3f56 switchdev: introduce transaction item queue for attr_set and obj_add
Now, the memory allocation in prepare/commit state is done separatelly
in each driver (rocker). Introduce the similar mechanism in generic
switchdev code, in form of queue. That can be used not only for memory
allocations, but also for different items. Abort item destruction
is handled as well.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 22:59:21 -07:00
Jiri Pirko 69f5df491e switchdev: rename "trans" to "trans_ph".
This is temporary, name "trans" will be used for something else and
"trans_ph" will eventually disappear.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24 22:59:21 -07:00
Jiri Pirko 0890cf6cb6 switchdev: fix return value of switchdev_port_fdb_dump in case of error
switchdev_port_fdb_dump is used as .ndo_fdb_dump. Its return value is
idx, so we cannot return errval.

Fixes: 45d4122ca7 ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: Scott Feldman<sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-05 22:02:11 -07:00
Vivien Didelot ce80e7bc57 net: switchdev: support static FDB addresses
This patch adds an ndm_state member to the switchdev_obj_fdb structure,
in order to support static FDB addresses.

Set Rocker ndm_state to NUD_REACHABLE.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11 12:03:19 -07:00
David S. Miller cdf0969763 Revert "Merge branch 'mv88e6xxx-switchdev-fdb'"
This reverts commit f1d5ca4344, reversing
changes made to 4933d85c51.

I applied v2 instead of v3.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11 12:00:37 -07:00
Vivien Didelot 890248261a net: switchdev: support static FDB addresses
This patch adds a is_static boolean to the switchdev_obj_fdb structure,
in order to set the ndm_state to either NUD_NOARP or NUD_REACHABLE.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09 22:48:09 -07:00
Vivien Didelot 1525c386a1 net: switchdev: change fdb addr for a byte array
The address in the switchdev_obj_fdb structure is currently represented
as a pointer. Replacing it for a 6-byte array allows switchdev to carry
addresses directly read from hardware registers, not stored by the
switch chip driver (as in Rocker).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09 22:48:08 -07:00
Scott Feldman 1a3b2ec93d switchdev: add offload_fwd_mark generator helper
skb->offload_fwd_mark and dev->offload_fwd_mark are 32-bit and should be
unique for device and may even be unique for a sub-set of ports within
device, so add switchdev helper function to generate unique marks based on
port's switch ID and group_ifindex.  group_ifindex would typically be the
container dev's ifindex, such as the bridge's ifindex.

The generator uses a global hash table to store offload_fwd_marks hashed by
{switch ID, group_ifindex} key.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20 18:32:44 -07:00
Scott Feldman d754f98b50 net: add phys ID compare helper to test if two IDs are the same
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20 18:32:44 -07:00
Vivien Didelot 2ee94014d9 net: switchdev: don't abort unsupported operations
There is no need to abort attribute setting or object addition, if the
prepare phase returned operation not supported.

Thus, abort these two transactions only if the error is not -EOPNOTSUPP.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-11 21:29:55 -07:00
Vivien Didelot 5c8079d049 net: switchdev: ignore unsupported bridge flags
switchdev_port_bridge_getlink() queries SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS
attributes, but a driver doesn't need to implement this in order to get
bridge link information.

So error out only on errors different than -EOPNOTSUPP.

(This is a follow-up patch for 7d4f8d8.)

Fixes: 8793d0a664 ("switchdev: add new switchdev_port_bridge_getlink")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24 01:06:34 -07:00
Scott Feldman e9fdaec0e0 switchdev: change BUG_ON to WARN for attr set failure case
This particular BUG_ON condition was checking for attr set err in the
COMMIT phase, which isn't expected (it's a driver bug if PREPARE phase is
OK but COMMIT fails).  But BUG_ON() is too strong for this case, so change
to WARN().  BUG_ON() would be warranted if the system was corrupted beyond
repair, but this is not the case here.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 06:57:17 -07:00
Scott Feldman 7d4f8d871a switchdev; add VLAN support for port's bridge_getlink
One more missing piece of the puzzle.  Add vlan dump support to switchdev
port's bridge_getlink.  iproute2 "bridge vlan show" cmd already knows how
to show the vlans installed on the bridge and the device , but (until now)
no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK
msg.  Before this patch, "bridge vlan show":

	$ bridge -c vlan show
	port    vlan ids
	sw1p1    30-34			<< bridge side vlans
		 57

	sw1p1				<< device side vlans (missing)

	sw1p2    57

	sw1p2

	sw1p3

	sw1p4

	br0     None

(When the port is bridged, the output repeats the vlan list for the vlans
on the bridge side of the port and the vlans on the device side of the
port.  The listing above show no vlans for the device side even though they
are installed).

After this patch:

	$ bridge -c vlan show
	port    vlan ids
	sw1p1    30-34			<< bridge side vlan
		 57

	sw1p1    30-34			<< device side vlans
		 57
		 3840 PVID

	sw1p2    57

	sw1p2    57
		 3840 PVID

	sw1p3    3842 PVID

	sw1p4    3843 PVID

	br0     None

I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func.
switchdev support adds an obj dump for VLAN objects, using the same
call-back scheme as FDB dump.  Support included for both compressed and
un-compressed vlan dumps.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 06:56:18 -07:00
Scott Feldman 3e3a78b495 switchdev: rename vlan vid_start to vid_begin
Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 06:56:18 -07:00
Scott Feldman 10ea5165e4 switchdev: fdb filter_dev is always NULL for self (device), so remove check
Remove the filter_dev check when dumping fdb entries, otherwise dump
returns empty list.  filter_dev is always passed as NULL when dumping fdbs
on SELF.  We want the fdbs installed on the device to be listed in the
dump.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Fixes: 45d4122c ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops")
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 00:58:27 -07:00
Scott Feldman 57225e7720 switchdev: fix BUG when port driver doesn't support set attr op
Fix a BUG_ON() where CONFIG_NET_SWITCHDEV is set but the driver for a
bridged port does not support switchdev_port_attr_set op.  Don't BUG_ON()
if -EOPNOTSUPP is returned.

Also change BUG_ON() to netdev_err since this is a normal error path and
does not warrant the use of BUG_ON(), which is reserved for unrecoverable
errs.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reported-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11 16:27:09 -07:00
Scott Feldman af201f723f switchdev: fix handling for drivers not supporting IPv4 fib add/del ops
If CONFIG_NET_SWITCHDEV is enabled, but port driver does not implement
support for IPv4 FIB add/del ops, don't fail route add/del offload
operations.  Route adds will not be marked as OFFLOAD.  Routes will be
installed in the kernel FIB, as usual.

This was report/fixed by Florian when testing DSA driver with net-next on
devices with L2 offload support but no L3 offload support. What he reported
was an initial route installed from DHCP client would fail (route not
installed to kernel FIB).  This was triggering the setting of
ipv4.fib_offload_disabled, which would disable route offloading after the
first failure.  So subsequent attempts to install the route would succeed.

There is follow-on work/discussion to address the handling of route install
failures, but for now, let's differentiate between no support and failed
support.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10 23:56:34 -07:00
Scott Feldman 7616dcbb21 switchdev: documentation: use switchdev_port_obj_xxx for IPv4 FIB add/modify/delete ops
Clarify in documentation and code that IPV4 FIB add operation is used for
both adding a new FIB entry to the device and for modifying an existing FIB
entry on the device.

Also, remove left-over references to ipv4_fib ops and replace with details
on SWITCHDEV_PORT_IPV4_FIB object.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03 23:47:23 -07:00
David S. Miller 36583eb54d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cadence/macb.c
	drivers/net/phy/phy.c
	include/linux/skbuff.h
	net/ipv4/tcp.c
	net/switchdev/switchdev.c

Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.

phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.

tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.

macb.c involved the addition of two zyncq device entries.

skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 01:22:35 -04:00
Samudrala, Sridhar 45d4122ca7 switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.
- introduce port fdb obj and generic switchdev_port_fdb_add/del/dump()
- use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops.
- add support for fdb obj in switchdev_port_obj_add/del/dump()
- switch rocker to implement fdb ops via switchdev_ops

v3: updated to sync with named union changes.

Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17 22:49:09 -04:00
Roopa Prabhu eea39946a1 rename RTNH_F_EXTERNAL to RTNH_F_OFFLOAD
RTNH_F_EXTERNAL today is printed as "offload" in iproute2 output.

This patch renames the flag to be consistent with what the user sees.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14 22:45:39 -04:00
Scott Feldman 42275bd8fc switchdev: don't use anonymous union on switchdev attr/obj structs
Older gcc versions (e.g.  gcc version 4.4.6) don't like anonymous unions
which was causing build issues on the newly added switchdev attr/obj
structs.  Fix this by using named union on structs.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 14:20:59 -04:00
Scott Feldman 7a7ee5312d switchdev: sparse warning: pass ipv4 fib dst as network-byte order
And let driver convert it to host-byte order as needed.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 12:26:27 -04:00
Scott Feldman 22c1f67ea5 switchdev: sparse warning: make __switchdev_port_obj_add static
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 12:26:27 -04:00
Scott Feldman 58c2cb16b1 switchdev: convert fib_ipv4_add/del over to switchdev_port_obj_add/del
The IPv4 FIB ops convert nicely to the switchdev objs and we're left with
only four switchdev ops: port get/set and port add/del.  Other objs will
follow, such as FDB.  So go ahead and convert IPv4 FIB over to switchdev
obj for consistency, anticipating more objs to come.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman 8793d0a664 switchdev: add new switchdev_port_bridge_getlink
Like bridge_setlink, add switchdev wrapper to handle bridge_getlink and
call into port driver to get port attrs.  For now, only BR_LEARNING and
BR_LEARNING_SYNC are returned.  To add more, we'll probably want to break
away from ndo_dflt_bridge_getlink() and build the netlink skb directly in
the switchdev code.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman 87a5dae59e switchdev: remove unused switchdev_port_bridge_dellink
Now we can remove old wrappers for dellink.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman 5c34e02214 switchdev: add new switchdev_port_bridge_dellink
Same change as setlink.  Provide the wrapper op for SELF ndo_bridge_dellink
and call into the switchdev driver to delete afspec VLANs.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:55 -04:00
Scott Feldman e71f220b34 switchdev: remove old switchdev_port_bridge_setlink
New attr-based bridge_setlink can recurse lower devs and recover on err, so
remove old wrapper (including ndo_dflt_switchdev_port_bridge_setlink).

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman 47f8328bb1 switchdev: add new switchdev bridge setlink
Add new switchdev_port_bridge_setlink that can be used by drivers
implementing .ndo_bridge_setlink to set switchdev bridge attributes.
Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr
sets.  Proper netlink attr policy checking is done on the protinfo part of
the netlink msg.

Currently, for protinfo, only bridge port attrs BR_LEARNING and
BR_LEARNING_SYNC are parsed and passed to port driver.

For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned
to SELF.  To illustrate with iproute2 cmd, we have:

	bridge vlan add vid 10 dev sw1p1 self master

To add VLAN 10 to port sw1p1 for both the bridge (master) and the device
(self).

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:54 -04:00
Scott Feldman 491d0f1533 switchdev: introduce switchdev add/del obj ops
Like switchdev attr get/set, add new switchdev obj add/del.  switchdev objs
will be things like VLANs or FIB entries, so add/del fits better for
objects than get/set used for attributes.

Use same two-phase prepare-commit transaction model as in attr set.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00
Scott Feldman 3563606258 switchdev: convert STP update to switchdev attr set
STP update is just a settable port attribute, so convert
switchdev_port_stp_update to an attr set.

For DSA, the prepare phase is skipped and STP updates are only done in the
commit phase.  This is because currently the DSA drivers don't need to
allocate any memory for STP updates and the STP update will not fail to HW
(unless something horrible goes wrong on the MDIO bus, in which case the
prepare phase wouldn't have been able to predict anyway).

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00
Scott Feldman f8e20a9f87 switchdev: convert parent_id_get to switchdev attr get
Switch ID is just a gettable port attribute.  Convert switchdev op
switchdev_parent_id_get to a switchdev attr.

Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is
called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only
port netdevs.  So when a port is stacked under bond/bridge, the user can
only query switch id via the switch ports, but not via the upper devices

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00
Scott Feldman 3094333d90 switchdev: introduce get/set attrs ops
Add two new swdev ops for get/set switch port attributes.  Most swdev
interactions on a port are gets or sets on port attributes, so rather than
adding ops for each attribute, let's define clean get/set ops for all
attributes, and then we can have clear, consistent rules on how attributes
propagate on stacked devs.

Add the basic algorithms for get/set attr ops.  Use the same recusive algo
to walk lower devs we've used for STP updates, for example.  For get,
compare attr value for each lower dev and only return success if attr
values match across all lower devs.  For sets, set the same attr value for
all lower devs.  We'll use a two-phase prepare-commit transaction model for
sets.  In the first phase, the driver(s) are asked if attr set is OK.  If
all OK, the commit attr set in second phase.  A driver would NACK the
prepare phase if it can't set the attr due to lack of resources or support,
within it's control.  RTNL lock must be held across both phases because
we'll recurse all lower devs first in prepare phase, and then recurse all
lower devs again in commit phase.  If any lower dev fails the prepare
phase, we need to abort the transaction for all lower devs.

If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to
indicate get/set only work on port (lowest) device.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00
Jiri Pirko 9d47c0a2d9 switchdev: s/swdev_/switchdev_/
Turned out that "switchdev" sticks. So just unify all related terms to use
this prefix.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:53 -04:00
Jiri Pirko ebb9a03a59 switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/
Turned out that "switchdev" sticks. So just unify all related terms to use
this prefix.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12 18:43:52 -04:00
Roopa Prabhu 558d51fa2f switchdev: fix stp update API to work with layered netdevices
make it same as the netdev_switch_port_bridge_setlink/dellink
api (ie traverse lowerdevs to get to the switch port).

removes "WARN_ON(!ops->ndo_switch_parent_id_get)" because
direct bridge ports can be stacked netdevices (like bonds
and team of switch ports) which may not implement this ndo.

v2 to v3:
	- remove changes to bond and team. Bring back the
	transparently following lowerdevs like i initially
	had for setlink/getlink
	(http://www.spinics.net/lists/netdev/msg313436.html)
	dave and scott feldman also seem to prefer it be that
	way and move to non-transparent way of doing things
	if we see a problem down the lane.

v3 to v4:
	- fix ret initialization

v4 to v5:
	- return err on first failure (scott feldman)

v5 to v6:
	- change variable name (err) and initialize to
	-EOPNOTSUPP (scott feldman).

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:44:56 -04:00
Scott Feldman 98237d433b switchdev: use new swdev ops
Move swdev wrappers over to new swdev ops (from previous ndo ops).  No
functional changes to the implementation.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>

rocker: move to new swdev ops

Signed-off-by: Scott Feldman <sfeldma@gmail.com>

dsa: move to new swdev ops

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16 00:14:43 -04:00
Simon Horman ac70c05b6f switchdev: correct spelling of notifier in comments
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11 23:06:39 -04:00
Scott Feldman f8f2147150 switchdev: add netlink flags to IPv4 FIB add op
Pass in the netlink flags (NLM_F_*) into switchdev driver for IPv4 FIB add op
to allow driver to 1) optimize hardware updates, 2) handle ip route prepend
and append commands correctly.

Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09 23:56:52 -04:00
Jiri Pirko f4427bc3e2 switchdev: use gpl variant of symbol export
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09 15:37:39 -04:00
Scott Feldman e1315db17d switchdev: fix CONFIG_IP_MULTIPLE_TABLES compile issue
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 12:43:54 -05:00
Scott Feldman 8e05fd7166 fib: hook IPv4 fib for hardware offload
Call into the switchdev driver any time an IPv4 fib entry is
added/modified/deleted from the kernel's FIB.  The switchdev driver may or
may not install the route to the offload device.  In the case where the
driver tries to install the route and something goes wrong (device's routing
table is full, etc), then all of the offloaded routes will be flushed from the
device, route forwarding falls back to the kernel, and no more routes are
offloading.

We can refine this logic later.  For now, use the simplist model of offloading
routes up to the point of failure, and then on failure, undo everything and
mark IPv4 offloading disabled.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 00:24:58 -05:00
Scott Feldman b5d6fbdeed switchdev: implement IPv4 fib ndo wrappers
Flesh out ndo wrappers to call into device driver.  To call into device driver,
the wrapper must interate over route's nexthops to ensure all nexthop devs
belong to the same switch device.  Currently, there is no support for route's
nexthops spanning offloaded and non-offloaded devices, or spanning ports of
multiple offload devices.

Since switch device ports may be stacked under virtual interfaces (bonds and/or
bridges), and the route's nexthop may be on the virtual interface, the wrapper
will traverse the nexthop dev down to the base dev.  It's the base dev that's
passed to the switchdev driver's ndo ops.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 00:24:58 -05:00
Scott Feldman 104616e74e switchdev: don't support custom ip rules, for now
Keep switchdev FIB offload model simple for now and don't allow custom ip
rules.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 00:24:58 -05:00
Scott Feldman 5e8d90497d switchdev: add IPv4 fib ndo ops wrappers
Add IPv4 fib ndo wrapper funcs and stub them out for now.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06 00:24:58 -05:00
Roopa Prabhu 8a44dbb202 swdevice: add new apis to set and del bridge port attributes
This patch adds two new api's netdev_switch_port_bridge_setlink
and netdev_switch_port_bridge_dellink to offload bridge port attributes
to switch port

(The names of the apis look odd with 'switch_port_bridge',
but am more inclined to change the prefix of the api to something else.
Will take any suggestions).

The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to
pass bridge port attributes to the port device.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01 23:16:34 -08:00
Jiri Pirko 03bf0c2812 switchdev: introduce switchdev notifier
This patch introduces new notifier for purposes of exposing events which happen
on switch driver side. The consumers of the event messages are mainly involved
masters, namely bridge and ovs.

Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18 00:23:57 -05:00
Scott Feldman 38dcf357ae bridge: call netdev_sw_port_stp_update when bridge port STP status changes
To notify switch driver of change in STP state of bridge port, add new
.ndo op and provide switchdev wrapper func to call ndo op. Use it in bridge
code then.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02 20:01:22 -08:00
Jiri Pirko 007f790c82 net: introduce generic switch devices support
The goal of this is to provide a possibility to support various switch
chips. Drivers should implement relevant ndos to do so. Now there is
only one ndo defined:
- for getting physical switch id is in place.

Note that user can use random port netdevice to access the switch.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-02 20:01:20 -08:00