mirror of https://gitee.com/openkylin/linux.git
599 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Darrick J. Wong
|
5838d0356b |
xfs: reset child dir '..' entry when unlinking child
While running xfs/168, I noticed a second source of post-shrink corruption errors causing shutdowns. Let's say that directory B has a low inode number and is a child of directory A, which has a high number. If B is empty but open, and unlinked from A, B's dotdot link continues to point to A. If A is then unlinked and the filesystem shrunk so that A is no longer a valid inode, a subsequent AIL push of B will trip the inode verifiers because the dotdot entry points outside of the filesystem. To avoid this problem, reset B's dotdot entry to the root directory when unlinking directories, since the root directory cannot be removed. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> |
|
|
Linus Torvalds
|
9f7b640f00 |
New code for 5.14:
- Refactor the buffer cache to use bulk page allocation
- Convert agnumber-based AG iteration to walk per-AG structures
- Clean up some unit conversions and other code warts
- Reduce spinlock contention in the directio fastpath
- Collapse all the inode cache walks into a single function
- Remove indirect function calls from the inode cache walk code
- Dramatically reduce the number of cache flushes sent when writing log
buffers
- Preserve inode sickness reports for longer
- Rename xfs_eofblocks since it controls inode cache walks
- Refactor the extended attribute code to prepare it for the addition
of log intent items to make xattrs fully transactional
- A few fixes to earlier large patchsets
- Log recovery fixes so that we don't accidentally mark the log clean
when log intent recovery fails
- Fix some latent SOB errors
- Clean up shutdown messages that get logged to dmesg
- Fix a regression in the online shrink code
- Fix a UAF in the buffer logging code if the fs goes offline
- Fix uninitialized error variables
- Fix a UAF in the CIL when commited log item callbacks race with a
shutdown
- Fix a bug where the CIL could hang trying to push part of the log ring
buffer that hasn't been filled yet
-----BEGIN PGP SIGNATURE-----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=08Q9
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Most of the work this cycle has been on refactoring various parts of
the codebase. The biggest non-cleanup changes are (1) reducing the
number of cache flushes sent when writing the log; (2) a substantial
number of log recovery fixes; and (3) I started accepting pull
requests from contributors if the commits in their branches match
what's been sent to the list.
For a week or so I /had/ staged a major cleanup of the logging code
from Dave Chinner, but it exposed so many lurking bugs in other parts
of the logging and log recovery code that I decided to defer that
patchset until we can address those latent bugs.
Larger cleanups this time include walking the incore inode cache (me)
and rework of the extended attribute code (Allison) to prepare it for
adding logged xattr updates (and directory tree parent pointers) in
future releases.
Summary:
- Refactor the buffer cache to use bulk page allocation
- Convert agnumber-based AG iteration to walk per-AG structures
- Clean up some unit conversions and other code warts
- Reduce spinlock contention in the directio fastpath
- Collapse all the inode cache walks into a single function
- Remove indirect function calls from the inode cache walk code
- Dramatically reduce the number of cache flushes sent when writing
log buffers
- Preserve inode sickness reports for longer
- Rename xfs_eofblocks since it controls inode cache walks
- Refactor the extended attribute code to prepare it for the addition
of log intent items to make xattrs fully transactional
- A few fixes to earlier large patchsets
- Log recovery fixes so that we don't accidentally mark the log clean
when log intent recovery fails
- Fix some latent SOB errors
- Clean up shutdown messages that get logged to dmesg
- Fix a regression in the online shrink code
- Fix a UAF in the buffer logging code if the fs goes offline
- Fix uninitialized error variables
- Fix a UAF in the CIL when commited log item callbacks race with a
shutdown
- Fix a bug where the CIL could hang trying to push part of the log
ring buffer that hasn't been filled yet"
* tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (102 commits)
xfs: don't wait on future iclogs when pushing the CIL
xfs: Fix a CIL UAF by getting get rid of the iclog callback lock
xfs: remove callback dequeue loop from xlog_state_do_iclog_callbacks
xfs: don't nest icloglock inside ic_callback_lock
xfs: Initialize error in xfs_attr_remove_iter
xfs: fix endianness issue in xfs_ag_shrink_space
xfs: remove dead stale buf unpin handling code
xfs: hold buffer across unpin and potential shutdown processing
xfs: force the log offline when log intent item recovery fails
xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes
xfs: shorten the shutdown messages to a single line
xfs: print name of function causing fs shutdown instead of hex pointer
xfs: fix type mismatches in the inode reclaim functions
xfs: separate primary inode selection criteria in xfs_iget_cache_hit
xfs: refactor the inode recycling code
xfs: add iclog state trace events
xfs: xfs_log_force_lsn isn't passed a LSN
xfs: Fix CIL throttle hang when CIL space used going backwards
xfs: journal IO cache flush reductions
xfs: remove need_start_rec parameter from xlog_write()
...
|
|
|
Linus Torvalds
|
8ec035ac4a |
fallthrough fixes for Clang for 5.14-rc1
Hi Linus,
Please, pull the following patches that fix many fall-through warnings
when building with Clang 12.0.0 and this[1] change reverted. Notice
that in order to enable -Wimplicit-fallthrough for Clang, such change[1]
is meant to be reverted at some point. So, these patches help to move
in that direction.
Thanks!
[1] commit
|
|
|
Dave Chinner
|
5f9b4b0de8 |
xfs: xfs_log_force_lsn isn't passed a LSN
In doing an investigation into AIL push stalls, I was looking at the log force code to see if an async CIL push could be done instead. This lead me to xfs_log_force_lsn() and looking at how it works. xfs_log_force_lsn() is only called from inode synchronisation contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn value as the LSN to sync the log to. This gets passed to xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the journal, and then used by xfs_log_force_lsn() to flush the iclogs to the journal. The problem is that ip->i_itemp->ili_last_lsn does not store a log sequence number. What it stores is passed to it from the ->iop_committing method, which is called by xfs_log_commit_cil(). The value this passes to the iop_committing method is the CIL context sequence number that the item was committed to. As it turns out, xlog_cil_force_lsn() converts the sequence to an actual commit LSN for the related context and returns that to xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn" variable that contained a sequence with an actual LSN and then uses that to sync the iclogs. This caused me some confusion for a while, even though I originally wrote all this code a decade ago. ->iop_committing is only used by a couple of log item types, and only inode items use the sequence number it is passed. Let's clean up the API, CIL structures and inode log item to call it a sequence number, and make it clear that the high level code is using CIL sequence numbers and not on-disk LSNs for integrity synchronisation purposes. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Darrick J. Wong
|
ffc18582ed |
xfs: clean up incore inode walk functions
This ambitious series aims to cleans up redundant inode walk code in
xfs_icache.c, hide implementation details of the quotaoff dquot release
code, and eliminates indirect function calls from incore inode walks.
The first thing it does is to move all the code that quotaoff calls to
release dquots from all incore inodes into xfs_icache.c. Next, it
separates the goal of an inode walk from the actual radix tree tags that
may or may not be involved and drops the kludgy XFS_ICI_NO_TAG thing.
Finally, we split the speculative preallocation (blockgc) and quotaoff
dquot release code paths into separate functions so that we can keep the
implementations cohesive.
Christoph suggested last cycle that we 'simply' change quotaoff not to
allow deactivating quota entirely, but as these cleanups are to enable
one major change in behavior (deferred inode inactivation) I do not want
to add a second behavior change (quotaoff) as a dependency.
To be blunt: Additional cleanups are not in scope for this series.
Next, I made two observations about incore inode radix tree walks --
since there's a 1:1 mapping between the walk goal and the per-inode
processing function passed in, we can use the goal to make a direct call
to the processing function. Furthermore, the only caller to supply a
nonzero iter_flags argument is quotaoff, and there's only one INEW flag.
From that observation, I concluded that it's quite possible to remove
two parameters from the xfs_inode_walk* function signatures -- the
iter_flags, and the execute function pointer. The middle of the series
moves the INEW functionality into the one piece (quotaoff) that wants
it, and removes the indirect calls.
The final observation is that the inode reclaim walk loop is now almost
the same as xfs_inode_walk, so it's silly to maintain two copies. Merge
the reclaim loop code into xfs_inode_walk.
Lastly, refactor the per-ag radix tagging functions since there's
duplicated code that can be consolidated.
This series is a prerequisite for the next two patchsets, since deferred
inode inactivation will add another inode radix tree tag and iterator
function to xfs_inode_walk.
v2: walk the vfs inode list when running quotaoff instead of the radix
tree, then rework the (now completely internal) inode walk function
to take the tag as the main parameter.
v3: merge the reclaim loop into xfs_inode_walk, then consolidate the
radix tree tagging functions
v4: rebase to 5.13-rc4
v5: combine with the quotaoff patchset, reorder functions to minimize
forward declarations, split inode walk goals from radix tree tags
to reduce conceptual confusion
v6: start moving the inode cache code towards the xfs_icwalk prefix
-----BEGIN PGP SIGNATURE-----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=Rxdn
-----END PGP SIGNATURE-----
Merge tag 'inode-walk-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2
xfs: clean up incore inode walk functions
This ambitious series aims to cleans up redundant inode walk code in
xfs_icache.c, hide implementation details of the quotaoff dquot release
code, and eliminates indirect function calls from incore inode walks.
The first thing it does is to move all the code that quotaoff calls to
release dquots from all incore inodes into xfs_icache.c. Next, it
separates the goal of an inode walk from the actual radix tree tags that
may or may not be involved and drops the kludgy XFS_ICI_NO_TAG thing.
Finally, we split the speculative preallocation (blockgc) and quotaoff
dquot release code paths into separate functions so that we can keep the
implementations cohesive.
Christoph suggested last cycle that we 'simply' change quotaoff not to
allow deactivating quota entirely, but as these cleanups are to enable
one major change in behavior (deferred inode inactivation) I do not want
to add a second behavior change (quotaoff) as a dependency.
To be blunt: Additional cleanups are not in scope for this series.
Next, I made two observations about incore inode radix tree walks --
since there's a 1:1 mapping between the walk goal and the per-inode
processing function passed in, we can use the goal to make a direct call
to the processing function. Furthermore, the only caller to supply a
nonzero iter_flags argument is quotaoff, and there's only one INEW flag.
From that observation, I concluded that it's quite possible to remove
two parameters from the xfs_inode_walk* function signatures -- the
iter_flags, and the execute function pointer. The middle of the series
moves the INEW functionality into the one piece (quotaoff) that wants
it, and removes the indirect calls.
The final observation is that the inode reclaim walk loop is now almost
the same as xfs_inode_walk, so it's silly to maintain two copies. Merge
the reclaim loop code into xfs_inode_walk.
Lastly, refactor the per-ag radix tagging functions since there's
duplicated code that can be consolidated.
This series is a prerequisite for the next two patchsets, since deferred
inode inactivation will add another inode radix tree tag and iterator
function to xfs_inode_walk.
v2: walk the vfs inode list when running quotaoff instead of the radix
tree, then rework the (now completely internal) inode walk function
to take the tag as the main parameter.
v3: merge the reclaim loop into xfs_inode_walk, then consolidate the
radix tree tagging functions
v4: rebase to 5.13-rc4
v5: combine with the quotaoff patchset, reorder functions to minimize
forward declarations, split inode walk goals from radix tree tags
to reduce conceptual confusion
v6: start moving the inode cache code towards the xfs_icwalk prefix
* tag 'inode-walk-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: refactor per-AG inode tagging functions
xfs: merge xfs_reclaim_inodes_ag into xfs_inode_walk_ag
xfs: pass struct xfs_eofblocks to the inode scan callback
xfs: fix radix tree tag signs
xfs: make the icwalk processing functions clean up the grab state
xfs: clean up inode state flag tests in xfs_blockgc_igrab
xfs: remove indirect calls from xfs_inode_walk{,_ag}
xfs: remove iter_flags parameter from xfs_inode_walk_*
xfs: move xfs_inew_wait call into xfs_dqrele_inode
xfs: separate the dqrele_all inode grab logic from xfs_inode_walk_ag_grab
xfs: pass the goal of the incore inode walk to xfs_inode_walk()
xfs: rename xfs_inode_walk functions to xfs_icwalk
xfs: move the inode walk functions further down
xfs: detach inode dquots at the end of inactivation
xfs: move the quotaoff dqrele inode walk into xfs_icache.c
[djwong: added variable names to function declarations while fixing
merge conflicts]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
|
Darrick J. Wong
|
c3eabd3650 |
xfs: initial agnumber -> perag conversions for shrink
If we want to use active references to the perag to be able to gate shrink removing AGs and hence perags safely, we've got a fair bit of work to do actually use perags in all the places we need to. There's a lot of code that iterates ag numbers and then looks up perags from that, often multiple times for the same perag in the one operation. If we want to use reference counted perags for access control, then we need to convert all these uses to perag iterators, not agno iterators. [Patches 1-4] The first step of this is consolidating all the perag management - init, free, get, put, etc into a common location. THis is spread all over the place right now, so move it all into libxfs/xfs_ag.[ch]. This does expose kernel only bits of the perag to libxfs and hence userspace, so the structures and code is rearranged to minimise the number of ifdefs that need to be added to the userspace codebase. The perag iterator in xfs_icache.c is promoted to a first class API and expanded to the needs of the code as required. [Patches 5-10] These are the first basic perag iterator conversions and changes to pass the perag down the stack from those iterators where appropriate. A lot of this is obvious, simple changes, though in some places we stop passing the perag down the stack because the code enters into an as yet unconverted subsystem that still uses raw AGs. [Patches 11-16] These replace the agno passed in the btree cursor for per-ag btree operations with a perag that is passed to the cursor init function. The cursor takes it's own reference to the perag, and the reference is dropped when the cursor is deleted. Hence we get reference coverage for the entire time the cursor is active, even if the code that initialised the cursor drops it's reference before the cursor or any of it's children (duplicates) have been deleted. The first patch adds the perag infrastructure for the cursor, the next four patches convert a btree cursor at a time, and the last removes the agno from the cursor once it is unused. [Patches 17-21] These patches are a demonstration of the simplifications and cleanups that come from plumbing the perag through interfaces that select and then operate on a specific AG. In this case the inode allocation algorithm does up to three walks across all AGs before it either allocates an inode or fails. Two of these walks are purely just to select the AG, and even then it doesn't guarantee inode allocation success so there's a third walk if the selected AG allocation fails. These patches collapse the selection and allocation into a single loop, simplifies the error handling because xfs_dir_ialloc() always returns ENOSPC if no AG was selected for inode allocation or we fail to allocate an inode in any AG, gets rid of xfs_dir_ialloc() wrapper, converts inode allocation to run entirely from a single perag instance, and then factors xfs_dialloc() into a much, much simpler loop which is easy to understand. Hence we end up with the same inode allocation logic, but it only needs two complete iterations at worst, makes AG selection and allocation atomic w.r.t. shrink and chops out out over 100 lines of code from this hot code path. [Patch 22] Converts the unlink path to pass perags through it. There's more conversion work to be done, but this patchset gets through a large chunk of it in one hit. Most of the iterators are converted, so once this is solidified we can move on to converting these to active references for being able to free perags while the fs is still active. -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEmJOoJ8GffZYWSjj/regpR/R1+h0FAmC3HUgUHGRhdmlkQGZy b21vcmJpdC5jb20ACgkQregpR/R1+h2yaw/+P0JzpI+6n06Ei00mjgE/Du/WhMLi 0JQ93Grlj+miuGGT9DgGCiRpoZnefhEk+BH6JqoEw1DQ3T5ilmAzrHLUUHSQC3+S dv85sJduheQ6yHuoO+4MzkaSq6JWKe7E9gZwAsVyBul5aSjdmaJaQdPwYMTXSXo0 5Uqq8ECFkMcaHVNjcBfasgR/fdyWy2Qe4PFTHTHdQpd+DNZ9UXgFKHW2og+1iry/ zDIvdIppJULA09TvVcZuFjd/1NzHQ/fLj5PAzz8GwagB4nz2x3s78Zevmo5yW/jK 3/+50vXa8ldhiHDYGTS3QXvS0xJRyqUyD47eyWOOiojZw735jEvAlCgjX6+0X1HC k3gCkQLv8l96fRkvUpgnLf/fjrUnlCuNBkm9d1Eq2Tied8dvLDtiEzoC6L05Nqob yd/nIUb1zwJFa9tsoheHhn0bblTGX1+zP0lbRJBje0LotpNO9DjGX5JoIK4GR7F8 y1VojcdgRI14HlxUnbF3p8wmQByN+M2tnp6GSdv9BA65bjqi05Rj/steFdZHBV6x wiRs8Yh6BTvMwKgufHhRQHfRahjNHQ/T/vOE+zNbWqemS9wtEUDop+KvPhC36R/k o/cmr23cF8ESX2eChk7XM4On3VEYpcvp2zSFgrFqZYl6RWOwEis3Htvce3KuSTPp 8Xq70te0gr2DVUU= =YNzW -----END PGP SIGNATURE----- Merge tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2 xfs: initial agnumber -> perag conversions for shrink If we want to use active references to the perag to be able to gate shrink removing AGs and hence perags safely, we've got a fair bit of work to do actually use perags in all the places we need to. There's a lot of code that iterates ag numbers and then looks up perags from that, often multiple times for the same perag in the one operation. If we want to use reference counted perags for access control, then we need to convert all these uses to perag iterators, not agno iterators. [Patches 1-4] The first step of this is consolidating all the perag management - init, free, get, put, etc into a common location. THis is spread all over the place right now, so move it all into libxfs/xfs_ag.[ch]. This does expose kernel only bits of the perag to libxfs and hence userspace, so the structures and code is rearranged to minimise the number of ifdefs that need to be added to the userspace codebase. The perag iterator in xfs_icache.c is promoted to a first class API and expanded to the needs of the code as required. [Patches 5-10] These are the first basic perag iterator conversions and changes to pass the perag down the stack from those iterators where appropriate. A lot of this is obvious, simple changes, though in some places we stop passing the perag down the stack because the code enters into an as yet unconverted subsystem that still uses raw AGs. [Patches 11-16] These replace the agno passed in the btree cursor for per-ag btree operations with a perag that is passed to the cursor init function. The cursor takes it's own reference to the perag, and the reference is dropped when the cursor is deleted. Hence we get reference coverage for the entire time the cursor is active, even if the code that initialised the cursor drops it's reference before the cursor or any of it's children (duplicates) have been deleted. The first patch adds the perag infrastructure for the cursor, the next four patches convert a btree cursor at a time, and the last removes the agno from the cursor once it is unused. [Patches 17-21] These patches are a demonstration of the simplifications and cleanups that come from plumbing the perag through interfaces that select and then operate on a specific AG. In this case the inode allocation algorithm does up to three walks across all AGs before it either allocates an inode or fails. Two of these walks are purely just to select the AG, and even then it doesn't guarantee inode allocation success so there's a third walk if the selected AG allocation fails. These patches collapse the selection and allocation into a single loop, simplifies the error handling because xfs_dir_ialloc() always returns ENOSPC if no AG was selected for inode allocation or we fail to allocate an inode in any AG, gets rid of xfs_dir_ialloc() wrapper, converts inode allocation to run entirely from a single perag instance, and then factors xfs_dialloc() into a much, much simpler loop which is easy to understand. Hence we end up with the same inode allocation logic, but it only needs two complete iterations at worst, makes AG selection and allocation atomic w.r.t. shrink and chops out out over 100 lines of code from this hot code path. [Patch 22] Converts the unlink path to pass perags through it. There's more conversion work to be done, but this patchset gets through a large chunk of it in one hit. Most of the iterators are converted, so once this is solidified we can move on to converting these to active references for being able to free perags while the fs is still active. * tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (23 commits) xfs: remove xfs_perag_t xfs: use perag through unlink processing xfs: clean up and simplify xfs_dialloc() xfs: inode allocation can use a single perag instance xfs: get rid of xfs_dir_ialloc() xfs: collapse AG selection for inode allocation xfs: simplify xfs_dialloc_select_ag() return values xfs: remove agno from btree cursor xfs: use perag for ialloc btree cursors xfs: convert allocbt cursors to use perags xfs: convert refcount btree cursor to use perags xfs: convert rmap btree cursor to using a perag xfs: add a perag to the btree cursor xfs: pass perags around in fsmap data dev functions xfs: push perags through the ag reservation callouts xfs: pass perags through to the busy extent code xfs: convert secondary superblock walk to use perags xfs: convert xfs_iwalk to use perag references xfs: convert raw ag walks to use for_each_perag xfs: make for_each_perag... a first class citizen ... |
|
|
Darrick J. Wong
|
3ea06d73e3 |
xfs: detach inode dquots at the end of inactivation
Once we're done with inactivating an inode, we're finished updating metadata for that inode. This means that we can detach the dquots at the end and not have to wait for reclaim to do it for us. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> |
|
|
Dave Chinner
|
f40aadb2bb |
xfs: use perag through unlink processing
Unlinked lists are held in the perag, and freeing of inodes needs to be passed a perag, too, so look up the perag early in the unlink processing and use it throughout. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> |
|
|
Dave Chinner
|
b652afd937 |
xfs: get rid of xfs_dir_ialloc()
This is just a simple wrapper around the per-ag inode allocation that doesn't need to exist. The internal mechanism to select and allocate within an AG does not need to be exposed outside xfs_ialloc.c, and it being exposed simply makes it harder to follow the code and simplify it. This is simplified by internalising xf_dialloc_select_ag() and xfs_dialloc_ag() into a single xfs_dialloc() function and then xfs_dir_ialloc() can go away. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Dave Chinner
|
4268547305 |
xfs: simplify xfs_dialloc_select_ag() return values
The only caller of xfs_dialloc_select_ag() will always return -ENOSPC to it's caller if the agbp returned from xfs_dialloc_select_ag() is NULL. IOWs, failure to find a candidate AGI we can allocate inodes from is always an ENOSPC condition, so move this logic up into xfs_dialloc_select_ag() so we can simplify the return logic in this function. xfs_dialloc_select_ag() now only ever returns 0 with a locked agbp, or an error with no agbp. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Dave Chinner
|
9bbafc7191 |
xfs: move xfs_perag_get/put to xfs_ag.[ch]
They are AG functions, not superblock functions, so move them to the appropriate location. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Gustavo A. R. Silva
|
53004ee78d |
xfs: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fall through */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_alloc.c:3167:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_da_btree.c:286:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_ag_resv.c:346:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_ag_resv.c:388:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_bmap_util.c:246:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_export.c:88:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_export.c:96:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_file.c:867:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_ioctl.c:562:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_ioctl.c:1548:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_iomap.c:1040:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_inode.c:852:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_log.c:2627:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/xfs_trans_buf.c:298:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/bmap.c:275:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/btree.c:48:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/common.c:85:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/common.c:138:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/common.c:698:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/dabtree.c:51:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/repair.c:951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/scrub/agheader.c:89:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> |
|
|
Darrick J. Wong
|
603f000b15 |
xfs: validate extsz hints against rt extent size when rtinherit is set
The RTINHERIT bit can be set on a directory so that newly created regular files will have the REALTIME bit set to store their data on the realtime volume. If an extent size hint (and EXTSZINHERIT) are set on the directory, the hint will also be copied into the new file. As pointed out in previous patches, for realtime files we require the extent size hint be an integer multiple of the realtime extent, but we don't perform the same validation on a directory with both RTINHERIT and EXTSZINHERIT set, even though the only use-case of that combination is to propagate extent size hints into new realtime files. This leads to inode corruption errors when the bad values are propagated. Because there may be existing filesystems with such a configuration, we cannot simply amend the inode verifier to trip on these directories and call it a day because that will cause previously "working" filesystems to start throwing errors abruptly. Note that it's valid to have directories with rtinherit set even if there is no realtime volume, in which case the problem does not manifest because rtinherit is ignored if there's no realtime device; and it's possible that someone set the flag, crashed, repaired the filesystem (which clears the hint on the realtime file) and continued. Therefore, mitigate this issue in several ways: First, if we try to write out an inode with both rtinherit/extszinherit set and an unaligned extent size hint, turn off the hint to correct the error. Second, if someone tries to misconfigure a directory via the fssetxattr ioctl, fail the ioctl. Third, reverify both extent size hint values when we propagate heritable inode attributes from parent to child, to prevent misconfigurations from spreading. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> |
|
|
Linus Torvalds
|
d2b6f8a179 |
New code for 5.13:
- Various minor fixes in online scrub.
- Prevent metadata files from being automatically inactivated.
- Validate btree heights by the computed per-btree limits.
- Don't warn about remounting with deprecated mount options.
- Initialize attr forks at create time if we suspect we're going to need
to store them.
- Reduce memory reallocation workouts in the logging code.
- Fix some theoretical math calculation errors in logged buffers that
span multiple discontig memory ranges but contiguous ondisk regions.
- Speedups in dirty buffer bitmap handling.
- Make type verifier functions more inline-happy to reduce overhead.
- Reduce debug overhead in directory checking code.
- Many many typo fixes.
- Begin to handle the permanent loss of the very end of a filesystem.
- Fold struct xfs_icdinode into xfs_inode.
- Deprecate the long defunct BMV_IF_NO_DMAPI_READ from the bmapx ioctl.
- Remove a broken directory block format check from online scrub.
- Fix a bug where we could produce an unnecessarily tall data fork btree
when creating an attr fork.
- Fix scrub and readonly remounts racing.
- Fix a writeback ioend log deadlock problem by dropping the behavior
where we could preallocate a setfilesize transaction.
- Fix some bugs in the new extent count checking code.
- Fix some bugs in the attr fork preallocation code.
- Refactor if_flags out of the incore inode fork data structure.
-----BEGIN PGP SIGNATURE-----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=oRKe
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"The notable user-visible addition this cycle is ability to remove
space from the last AG in a filesystem. This is the first of many
changes needed for full-fledged support for shrinking a filesystem.
Still needed are (a) the ability to reorganize files and metadata away
from the end of the fs; (b) the ability to remove entire allocation
groups; (c) shrink support for realtime volumes; and (d) thorough
testing of (a-c).
There are a number of performance improvements in this code drop: Dave
streamlined various parts of the buffer logging code and reduced the
cost of various debugging checks, and added the ability to pre-create
the xattr structures while creating files. Brian eliminated
transaction reservations that were being held across writeback (thus
reducing livelock potential.
Other random pieces: Pavel fixed the repetitve warnings about
deprecated mount options, I fixed online fsck to behave itself when a
readonly remount comes in during scrub, and refactored various other
parts of that code, Christoph contributed a lot of refactoring this
cycle. The xfs_icdinode structure has been absorbed into the (incore)
xfs_inode structure, and the format and flags handling around
xfs_inode_fork structures has been simplified. Chandan provided a
number of fixes for extent count overflow related problems that have
been shaken out by debugging knobs added during 5.12.
Summary:
- Various minor fixes in online scrub.
- Prevent metadata files from being automatically inactivated.
- Validate btree heights by the computed per-btree limits.
- Don't warn about remounting with deprecated mount options.
- Initialize attr forks at create time if we suspect we're going to
need to store them.
- Reduce memory reallocation workouts in the logging code.
- Fix some theoretical math calculation errors in logged buffers that
span multiple discontig memory ranges but contiguous ondisk
regions.
- Speedups in dirty buffer bitmap handling.
- Make type verifier functions more inline-happy to reduce overhead.
- Reduce debug overhead in directory checking code.
- Many many typo fixes.
- Begin to handle the permanent loss of the very end of a filesystem.
- Fold struct xfs_icdinode into xfs_inode.
- Deprecate the long defunct BMV_IF_NO_DMAPI_READ from the bmapx
ioctl.
- Remove a broken directory block format check from online scrub.
- Fix a bug where we could produce an unnecessarily tall data fork
btree when creating an attr fork.
- Fix scrub and readonly remounts racing.
- Fix a writeback ioend log deadlock problem by dropping the behavior
where we could preallocate a setfilesize transaction.
- Fix some bugs in the new extent count checking code.
- Fix some bugs in the attr fork preallocation code.
- Refactor if_flags out of the incore inode fork data structure"
* tag 'xfs-5.13-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (77 commits)
xfs: remove xfs_quiesce_attr declaration
xfs: remove XFS_IFEXTENTS
xfs: remove XFS_IFINLINE
xfs: remove XFS_IFBROOT
xfs: only look at the fork format in xfs_idestroy_fork
xfs: simplify xfs_attr_remove_args
xfs: rename and simplify xfs_bmap_one_block
xfs: move the XFS_IFEXTENTS check into xfs_iread_extents
xfs: drop unnecessary setfilesize helper
xfs: drop unused ioend private merge and setfilesize code
xfs: open code ioend needs workqueue helper
xfs: drop submit side trans alloc for append ioends
xfs: fix return of uninitialized value in variable error
xfs: get rid of the ip parameter to xchk_setup_*
xfs: fix scrub and remount-ro protection when running scrub
xfs: move the check for post-EOF mappings into xfs_can_free_eofblocks
xfs: move the xfs_can_free_eofblocks call under the IOLOCK
xfs: precalculate default inode attribute offset
xfs: default attr fork size does not handle device inodes
xfs: inode fork allocation depends on XFS_IFEXTENT flag
...
|
|
|
Christoph Hellwig
|
b2197a36c0 |
xfs: remove XFS_IFEXTENTS
The in-memory XFS_IFEXTENTS is now only used to check if an inode with extents still needs the extents to be read into memory before doing operations that need the extent map. Add a new xfs_need_iread_extents helper that returns true for btree format forks that do not have any entries in the in-memory extent btree, and use that instead of checking the XFS_IFEXTENTS flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Darrick J. Wong
|
7d88329e5b |
xfs: move the check for post-EOF mappings into xfs_can_free_eofblocks
Fix the weird split of responsibilities between xfs_can_free_eofblocks and xfs_free_eofblocks by moving the chunk of code that looks for any actual post-EOF space mappings from the second function into the first. This clears the way for deferred inode inactivation to be able to decide if an inode needs inactivation work before committing the released inode to the inactivation code paths (vs. marking it for reclaim). Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> |
|
|
Dave Chinner
|
8de1cb0038 |
xfs: inode fork allocation depends on XFS_IFEXTENT flag
Due to confusion on when the XFS_IFEXTENT needs to be set, the changes in |
|
|
Dave Chinner
|
2442ee15bb |
xfs: eager inode attr fork init needs attr feature awareness
The pitfalls of regression testing on a machine without realising
that selinux was disabled. Only set the attr fork during inode
allocation if the attr feature bits are already set on the
superblock.
Fixes:
|
|
|
Christoph Hellwig
|
4422501da6 |
xfs: merge _xfs_dic2xflags into xfs_ip2xflags
Merge _xfs_dic2xflags into its only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
e98d5e882b |
xfs: move the di_crtime field to struct xfs_inode
Move the crtime field from struct xfs_icdinode into stuct xfs_inode and remove the now entirely unused struct xfs_icdinode. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
3e09ab8fdc |
xfs: move the di_flags2 field to struct xfs_inode
In preparation of removing the historic icinode struct, move the flags2 field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
db07349da2 |
xfs: move the di_flags field to struct xfs_inode
In preparation of removing the historic icinode struct, move the flags field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
7821ea302d |
xfs: move the di_forkoff field to struct xfs_inode
In preparation of removing the historic icinode struct, move the forkoff field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
ee7b83fd36 |
xfs: use a union for i_cowextsize and i_flushiter
The i_cowextsize field is only used for v3 inodes, and the i_flushiter field is only used for v1/v2 inodes. Use a union to pack the inode a littler better after adding a few missing guards around their usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
965e0a1ad2 |
xfs: move the di_flushiter field to struct xfs_inode
In preparation of removing the historic icinode struct, move the flushiter field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
b33ce57d3e |
xfs: move the di_cowextsize field to struct xfs_inode
In preparation of removing the historic icinode struct, move the cowextsize field into the containing xfs_inode structure. Also switch to use the xfs_extlen_t instead of a uint32_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
031474c28a |
xfs: move the di_extsize field to struct xfs_inode
In preparation of removing the historic icinode struct, move the extsize field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
6e73a545f9 |
xfs: move the di_nblocks field to struct xfs_inode
In preparation of removing the historic icinode struct, move the nblocks field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
13d2c10b05 |
xfs: move the di_size field to struct xfs_inode
In preparation of removing the historic icinode struct, move the on-disk size field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
ceaf603c70 |
xfs: move the di_projid field to struct xfs_inode
In preparation of removing the historic icinode struct, move the projid field into the containing xfs_inode structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
9b3beb028f |
xfs: remove the di_dmevmask and di_dmstate fields from struct xfs_icdinode
The legacy DMAPI fields were never set by upstream Linux XFS, and have no way to be read using the kernel APIs. So instead of bloating the in-core inode for them just copy them from the on-disk inode into the log when logging the inode. The only caveat is that we need to make sure to zero the fields for newly read or deleted inodes, which is solved using a new flag in the inode. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
4cb6f2e8c2 |
xfs: consistently initialize di_flags2
Make sure di_flags2 is always initialized. We currently get this implicitly by clearing the dinode core on allocating the in-core inode, but that is about to go away. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Christoph Hellwig
|
af9dcddef6 |
xfs: split xfs_imap_to_bp
Split looking up the dinode from xfs_imap_to_bp, which can be significantly simplified as a result. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Bhaskar Chowdhury
|
0145225e35 |
xfs: Rudimentary spelling fix
s/sytemcall/syscall/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> |
|
|
Dave Chinner
|
e6a688c332 |
xfs: initialise attr fork on inode create
When we allocate a new inode, we often need to add an attribute to
the inode as part of the create. This can happen as a result of
needing to add default ACLs or security labels before the inode is
made visible to userspace.
This is highly inefficient right now. We do the create transaction
to allocate the inode, then we do an "add attr fork" transaction to
modify the just created empty inode to set the inode fork offset to
allow attributes to be stored, then we go and do the attribute
creation.
This means 3 transactions instead of 1 to allocate an inode, and
this greatly increases the load on the CIL commit code, resulting in
excessive contention on the CIL spin locks and performance
degradation:
18.99% [kernel] [k] __pv_queued_spin_lock_slowpath
3.57% [kernel] [k] do_raw_spin_lock
2.51% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock
2.48% [kernel] [k] memcpy
2.34% [kernel] [k] xfs_log_commit_cil
The typical profile resulting from running fsmark on a selinux enabled
filesytem is adds this overhead to the create path:
- 15.30% xfs_init_security
- 15.23% security_inode_init_security
- 13.05% xfs_initxattrs
- 12.94% xfs_attr_set
- 6.75% xfs_bmap_add_attrfork
- 5.51% xfs_trans_commit
- 5.48% __xfs_trans_commit
- 5.35% xfs_log_commit_cil
- 3.86% _raw_spin_lock
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 0.70% xfs_trans_alloc
0.52% xfs_trans_reserve
- 5.41% xfs_attr_set_args
- 5.39% xfs_attr_set_shortform.constprop.0
- 4.46% xfs_trans_commit
- 4.46% __xfs_trans_commit
- 4.33% xfs_log_commit_cil
- 2.74% _raw_spin_lock
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
0.60% xfs_inode_item_format
0.90% xfs_attr_try_sf_addname
- 1.99% selinux_inode_init_security
- 1.02% security_sid_to_context_force
- 1.00% security_sid_to_context_core
- 0.92% sidtab_entry_to_string
- 0.90% sidtab_sid2str_get
0.59% sidtab_sid2str_put.part.0
- 0.82% selinux_determine_inode_label
- 0.77% security_transition_sid
0.70% security_compute_sid.part.0
And fsmark creation rate performance drops by ~25%. The key point to
note here is that half the additional overhead comes from adding the
attribute fork to the newly created inode. That's crazy, considering
we can do this same thing at inode create time with a couple of
lines of code and no extra overhead.
So, if we know we are going to add an attribute immediately after
creating the inode, let's just initialise the attribute fork inside
the create transaction and chop that whole chunk of code out of
the create fast path. This completely removes the performance
drop caused by enabling SELinux, and the profile looks like:
- 8.99% xfs_init_security
- 9.00% security_inode_init_security
- 6.43% xfs_initxattrs
- 6.37% xfs_attr_set
- 5.45% xfs_attr_set_args
- 5.42% xfs_attr_set_shortform.constprop.0
- 4.51% xfs_trans_commit
- 4.54% __xfs_trans_commit
- 4.59% xfs_log_commit_cil
- 2.67% _raw_spin_lock
- 3.28% do_raw_spin_lock
3.08% __pv_queued_spin_lock_slowpath
0.66% xfs_inode_item_format
- 0.90% xfs_attr_try_sf_addname
- 0.60% xfs_trans_alloc
- 2.35% selinux_inode_init_security
- 1.25% security_sid_to_context_force
- 1.21% security_sid_to_context_core
- 1.19% sidtab_entry_to_string
- 1.20% sidtab_sid2str_get
- 0.86% sidtab_sid2str_put.part.0
- 0.62% _raw_spin_lock_irqsave
- 0.77% do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 0.84% selinux_determine_inode_label
- 0.83% security_transition_sid
0.86% security_compute_sid.part.0
Which indicates the XFS overhead of creating the selinux xattr has
been halved. This doesn't fix the CIL lock contention problem, just
means it's not a limiting factor for this workload. Lock contention
in the security subsystems is going to be an issue soon, though...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: fix compilation error when CONFIG_SECURITY=n]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
|
|
|
Darrick J. Wong
|
383e32b0d0 |
xfs: prevent metadata files from being inactivated
Files containing metadata (quota records, rt bitmap and summary info) are fully managed by the filesystem, which means that all resource cleanup must be explicit, not automatic. This means that they should never be subjected automatic to post-eof truncation, nor should they be freed automatically even if the link count drops to zero. In other words, xfs_inactive() should leave these files alone. Add the necessary predicate functions to make this happen. This adds a second layer of prevention for the kinds of fs corruption that was fixed by commit |
|
|
Christian Brauner
|
db998553cf
|
fs: introduce two inode i_{u,g}id initialization helpers
Give filesystem two little helpers that do the right thing when initializing the i_uid and i_gid fields on idmapped and non-idmapped mounts. Filesystems shouldn't have to be concerned with too many details. Link: https://lore.kernel.org/r/20210320122623.599086-5-christian.brauner@ubuntu.com Inspired-by: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
|
|
Christian Brauner
|
a65e58e791
|
fs: document and rename fsid helpers
Vivek pointed out that the fs{g,u}id_into_mnt() naming scheme can be
misleading as it could be understood as implying they do the exact same
thing as i_{g,u}id_into_mnt(). The original motivation for this naming
scheme was to signal to callers that the helpers will always take care
to map the k{g,u}id such that the ownership is expressed in terms of the
mnt_users.
Get rid of the confusion by renaming those helpers to something more
sensible. Al suggested mapped_fs{g,u}id() which seems a really good fit.
Usually filesystems don't need to bother with these helpers directly
only in some cases where they allocate objects that carry {g,u}ids which
are either filesystem specific (e.g. xfs quota objects) or don't have a
clean set of helpers as inodes have.
Link: https://lore.kernel.org/r/20210320122623.599086-3-christian.brauner@ubuntu.com
Inspired-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
|
Darrick J. Wong
|
b5a08423da |
xfs: fix quota accounting when a mount is idmapped
Nowadays, we indirectly use the idmap-aware helper functions in the VFS
to set the initial uid and gid of a file being created. Unfortunately,
we didn't convert the quota code, which means we attach the wrong dquots
to files created on an idmapped mount.
Fixes:
|
|
|
Linus Torvalds
|
7d6beb71da |
idmapped-mounts-v5.12
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
|
|
|
Darrick J. Wong
|
f2f7b9ff62 |
xfs: refactor inode creation transaction/inode/quota allocation idiom
For file creation, create a new helper xfs_trans_alloc_icreate that allocates a transaction and reserves the appropriate amount of quota against that transction. Replace all the open-coded idioms with a single call to this helper so that we can contain the retry loops in the next patchset. This changes the locking behavior for non-tempfile creation slightly, in that we now make the quota reservation without holding the directory ILOCK. While the dquots chosen for inode creation are based on the directory state at a given point in time, the directory ILOCK was released as soon as the dquot references are picked up. Hence it was never necessary to hold the directory ILOCK for the quota reservation. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
|
|
Darrick J. Wong
|
ad4a747397 |
xfs: clean up icreate quota reservation calls
Create a proper helper so that inode creation calls can reserve quota with a dedicated function. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> |
|
|
Christoph Hellwig
|
f736d93d76
|
xfs: support idmapped mounts
Enable idmapped mounts for xfs. This basically just means passing down the user_namespace argument from the VFS methods down to where it is passed to the relevant helpers. Note that full-filesystem bulkstat is not supported from inside idmapped mounts as it is an administrative operation that acts on the whole file system. The limitation is not applied to the bulkstat single operation that just operates on a single inode. Link: https://lore.kernel.org/r/20210121131959.646623-40-christian.brauner@ubuntu.com Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
|
|
Christoph Hellwig
|
01ea173e10 |
xfs: fix up non-directory creation in SGID directories
XFS always inherits the SGID bit if it is set on the parent inode, while the generic inode_init_owner does not do this in a few cases where it can create a possible security problem, see commit |
|
|
Chandan Babu R
|
02092a2f03 |
xfs: Check for extent overflow when renaming dir entries
A rename operation is essentially a directory entry remove operation from the perspective of parent directory (i.e. src_dp) of rename's source. Hence the only place where we check for extent count overflow for src_dp is in xfs_bmap_del_extent_real(). xfs_bmap_del_extent_real() returns -ENOSPC when it detects a possible extent count overflow and in response, the higher layers of directory handling code do the following: 1. Data/Free blocks: XFS lets these blocks linger until a future remove operation removes them. 2. Dabtree blocks: XFS swaps the blocks with the last block in the Leaf space and unmaps the last block. For target_dp, there are two cases depending on whether the destination directory entry exists or not. When destination directory entry does not exist (i.e. target_ip == NULL), extent count overflow check is performed only when transaction has a non-zero sized space reservation associated with it. With a zero-sized space reservation, XFS allows a rename operation to continue only when the directory has sufficient free space in its data/leaf/free space blocks to hold the new entry. When destination directory entry exists (i.e. target_ip != NULL), all we need to do is change the inode number associated with the already existing entry. Hence there is no need to perform an extent count overflow check. Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |
|
|
Chandan Babu R
|
f5d9274919 |
xfs: Check for extent overflow when adding dir entries
Directory entry addition can cause the following, 1. Data block can be added/removed. A new extent can cause extent count to increase by 1. 2. Free disk block can be added/removed. Same behaviour as described above for Data block. 3. Dabtree blocks. XFS_DA_NODE_MAXDEPTH blocks can be added. Each of these can be new extents. Hence extent count can increase by XFS_DA_NODE_MAXDEPTH. Signed-off-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |
|
|
Darrick J. Wong
|
6da1b4b1ab |
xfs: fix an ABBA deadlock in xfs_rename
When overlayfs is running on top of xfs and the user unlinks a file in
the overlay, overlayfs will create a whiteout inode and ask xfs to
"rename" the whiteout file atop the one being unlinked. If the file
being unlinked loses its one nlink, we then have to put the inode on the
unlinked list.
This requires us to grab the AGI buffer of the whiteout inode to take it
off the unlinked list (which is where whiteouts are created) and to grab
the AGI buffer of the file being deleted. If the whiteout was created
in a higher numbered AG than the file being deleted, we'll lock the AGIs
in the wrong order and deadlock.
Therefore, grab all the AGI locks we think we'll need ahead of time, and
in order of increasing AG number per the locking rules.
Reported-by: wenli xie <wlxie7296@gmail.com>
Fixes:
|
|
|
Dave Chinner
|
8d822dc38a |
xfs: spilt xfs_dialloc() into 2 functions
This patch explicitly separates free inode chunk allocation and inode allocation into two individual high level operations. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |
|
|
Dave Chinner
|
f3bf6e0f11 |
xfs: move xfs_dialloc_roll() into xfs_dialloc()
Get rid of the confusing ialloc_context and failure handling around xfs_dialloc() by moving xfs_dialloc_roll() into xfs_dialloc(). Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |
|
|
Dave Chinner
|
1abcf26101 |
xfs: move on-disk inode allocation out of xfs_ialloc()
So xfs_ialloc() will only address in-core inode allocation then, Also, rename xfs_ialloc() to xfs_dir_ialloc_init() in order to keep everything in xfs_inode.c under the same namespace. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |