Userspace needs to know the version of the interface implemented by a
client so it can create the proper command streams. Allow individual
drivers to store this version along with the client so that it can be
returned to userspace upon opening a channel.
Acked-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since tegra_fb is now the same as drm_framebuffer, we can just replace
the type completely.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle function the same as the GEM framebuffer helper, we
can reuse that.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Attaching to and detaching from an IOMMU uses the same code sequence in
every driver, so factor it out into separate helpers.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than subclass the global atomic state to store the hub display
clock and rate, create a private object and store this data in its
state.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The bulk of these changes are preparation work and addition of support
for Tegra186. Currently only HDMI output (the primary output on Jetson
TX2) is supported, but the hardware is also capable of doing DSI and
DisplayPort.
Tegra DRM now also uses the atomic commit helpers instead of the open-
coded variant that was only doing half its job. As a bit of a byproduct
of the Tegra186 support the driver also gained HDMI 2.0 as well as zpos
property support.
Along the way there are also a few patches to clean up a few things and
fix minor issues.
-----BEGIN PGP SIGNATURE-----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=FfXI
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.16-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.16-rc1
The bulk of these changes are preparation work and addition of support
for Tegra186. Currently only HDMI output (the primary output on Jetson
TX2) is supported, but the hardware is also capable of doing DSI and
DisplayPort.
Tegra DRM now also uses the atomic commit helpers instead of the open-
coded variant that was only doing half its job. As a bit of a byproduct
of the Tegra186 support the driver also gained HDMI 2.0 as well as zpos
property support.
Along the way there are also a few patches to clean up a few things and
fix minor issues.
* tag 'drm/tegra/for-4.16-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux: (51 commits)
drm/tegra: dc: Properly cleanup overlay planes
drm/tegra: dc: Fix possible_crtcs mask for planes
drm/tegra: dc: Restore YUV overlay support
drm/tegra: dc: Implement legacy blending
drm/tegra: Correct timeout in tegra_syncpt_wait
drm/tegra: gem: Correct iommu_map_sg() error checking
drm/tegra: dc: Link DC1 to DC0 on Tegra20
drm/tegra: Fix non-debugfs builds
drm/tegra: dpaux: Keep reset defaults for hybrid pad parameters
drm/tegra: Mark Tegra186 display hub PM functions __maybe_unused
drm/tegra: Use IOMMU groups
gpu: host1x: Use IOMMU groups
drm/tegra: Implement zpos property
drm/tegra: dc: Remove redundant spinlock
drm/tegra: dc: Use direct offset to plane registers
drm/tegra: dc: Support more formats
drm/tegra: fb: Force alpha formats
drm/tegra: dpaux: Add Tegra186 support
drm/tegra: dpaux: Implement runtime PM
drm/tegra: sor: Support HDMI 2.0 modes
...
In order to support IOMMUs more generically and transparently handle the
ARM SMMU on Tegra186, move to using groups instead of devices for domain
attachment. An IOMMU group is a set of devices that share the same IOMMU
domain and is therefore a good match to represent what Tegra DRM needs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SOR found on Tegra186 is very similar to the one found on Tegra210
and earlier. However, due to some changes in the display architecture,
some programming sequences have changed and some register have moved
around.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display architecture has changed in several significant ways with
the new Tegra186 SoC. Shared between all display controllers is a set
of common resources referred to as the display hub. The hub generates
accesses to memory and feeds them into various composition pipelines,
each of which being a window that can be assigned to arbitrary heads.
Atomic state is subclassed in order to track the global bandwidth
requirements and select and adjust the hub clocks appropriately. The
plane code is shared to a large degree with earlier SoC generations,
except where the programming differs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There's no reason not to use them, and they already get all the
semantics right, so rip out all of the custom code and replace it by the
helpers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This driver can use drm_fb_helper_lastclose() as its .lastclose callback.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205182504.41923-12-noralf@tronnes.org
In order to support CEC the HDMI driver has to inform the CEC driver
whenever the physical address changes. So when the EDID is read the
CEC driver has to be informed and whenever the hotplug detect goes
away.
This is done through the cec-notifier framework.
The link between the HDMI driver and the CEC driver is done through
the hdmi-phandle property in the tegra-cec node in the device tree.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Register offsets are usually fairly small numbers, so an unsigned int is
more than enough to represent them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Several channels could be made to write the same unit concurrently via
the SETCLASS opcode, trusting userspace is a bad idea. It should be
possible to drop the per-client channel reservation and add a per-unit
locking by inserting MLOCK's to the command stream to re-allow the
SETCLASS opcode, but it will be much more work. Let's forbid the
unit-unrelated class changes for now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This contains various fixes to the host1x driver as well as a plug for a
leak of kernel pointers to userspace.
A fairly big addition this time around is the Video Image Composer (VIC)
support that can be used to accelerate some 2D and image compositing
operations.
Furthermore the driver now supports FB modifiers, so we no longer rely
on a custom IOCTL to set those.
Finally this contains a few preparatory patches for Tegra186 support
which unfortunately didn't quite make it this time, but will hopefully
be ready for v4.13.
-----BEGIN PGP SIGNATURE-----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=Eqtp
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.12-rc1
This contains various fixes to the host1x driver as well as a plug for a
leak of kernel pointers to userspace.
A fairly big addition this time around is the Video Image Composer (VIC)
support that can be used to accelerate some 2D and image compositing
operations.
Furthermore the driver now supports FB modifiers, so we no longer rely
on a custom IOCTL to set those.
Finally this contains a few preparatory patches for Tegra186 support
which unfortunately didn't quite make it this time, but will hopefully
be ready for v4.13.
* tag 'drm/tegra/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
gpu: host1x: Fix host1x driver shutdown
gpu: host1x: Support module reset
gpu: host1x: Sort includes alphabetically
drm/tegra: Add VIC support
dt-bindings: Add bindings for the Tegra VIC
drm/tegra: Add falcon helper library
drm/tegra: Add Tegra DRM allocation API
drm/tegra: Add tiling FB modifiers
drm/tegra: Don't leak kernel pointer to userspace
drm/tegra: Protect IOMMU operations by mutex
drm/tegra: Enable IOVA API when IOMMU support is enabled
gpu: host1x: Add IOMMU support
gpu: host1x: Fix potential out-of-bounds access
iommu/iova: Fix compile error with CONFIG_IOMMU_IOVA=m
iommu: Add dummy implementations for !IOMMU_IOVA
MAINTAINERS: Add related headers to IOMMU section
iommu/iova: Consolidate code for adding new node to iovad domain rbtree
This patch adds support for Video Image Compositor engine which
can be used for 2d operations.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a new IO virtual memory allocation API to allow clients to
allocate non-GEM memory in the Tegra DRM IOMMU domain. This is
required e.g. for loading client firmware when clients are attached
to the IOMMU domain.
The allocator allocates contiguous physical pages that are then
mapped contiguously to the IOMMU domain using the iova_domain
library provided by the kernel. Contiguous physical pages are
used so that the same allocator works also when IOMMU support
is disabled and therefore devices access physical memory directly.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Each open file descriptor can have any number of contexts associated
with it. To differentiate between these contexts a unique ID is required
and back when these userspace interfaces were introduced, in commit
d43f81cbaf ("drm/tegra: Add gr2d device"), the pointer to the context
structure was deemed adequate. However, this leaks information about
kernel internal memory to userspace, which can potentially be exploited.
Switch the context parameter to be allocated from an IDR, which has the
added benefit of providing an easy way to look up a context from its ID.
Signed-off-by: Thierry Reding <treding@nvidia.com>
IOMMU support is currently not thread-safe, which can cause crashes,
amongst other things, under certain workloads.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.
As the result, the wrapper functions tegra_drm_xxx get killed
completely, and tegra_dc_xxx are filled into struct drm_crtc_funcs as
vblank hooks directly.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-21-git-send-email-shawnguo@kernel.org
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.
As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.
<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-14-git-send-email-boris.brezillon@free-electrons.com
The Tegra powergate and rail IDs are always positive values and so change
the type to be unsigned and remove the tests to see if the ID is less
than zero. Update the Tegra DC powergate type to be an unsigned as well.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The core takes care of that now.
v2: Fixup misplaced hunk.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Terje Bergström <tbergstrom@nvidia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-12-git-send-email-daniel.vetter@ffwll.ch
Use the drm_atomic_helper_suspend() and drm_atomic_helper_resume()
helpers to implement subsystem-level suspend/resume.
v2: suspend framebuffer device to avoid concurrency issues
v3: resume fbdev on failure to suspend (Emil Velikov)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of getting a pointer to the driver-specific wrapper of AUX
channels, use the AUX channel objects directly to avoid hackish casting
between the two types.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use the new multi-driver module helpers to get rid of some boilerplate
in the module initialization and cleanup functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
DRM_TEGRA_FBDEV config is currently used to enable/disable legacy fbdev
emulation for the tegra kms driver.
Remove this local config option and use the top level DRM_FBDEV_EMULATION
config option instead.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1445933459-5249-4-git-send-email-architt@codeaurora.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Record interrupt statistics, such as the number of frames and VBLANKs
received and the number of FIFO underflow and overflows.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The tegra_dc_setup_clock() function is unused after the conversion to
atomic mode-setting, so remove it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display controller on Tegra can use syncpoints to count VBLANK
events. syncpoints are 32-bit unsigned integers, so well suited as
VBLANK counters.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tracking these in the plane state allows them to be computed in the
->atomic_check() callback and reused when applying the configuration in
->atomic_update().
Signed-off-by: Thierry Reding <treding@nvidia.com>
Provide a custom ->atomic_commit() implementation which supports async
commits. The generic atomic page-flip helper can use this to implement
page-flipping.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This allows the clock setup to be separated from the clock programming
and better matches the expectations of the atomic modesetting where no
code paths must fail during modeset.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The tegra_output midlayer is now completely gone and output drivers use
it purely as a helper library.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement encoder and connector within the eDP driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement encoder and connector within the DSI driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement encoder and connector within the HDMI driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement encoder and connector within the RGB driver itself using the
Tegra output helpers rather than using the Tegra output as midlayer. By
doing so one level of indirection is removed and output drivers become
more flexible while keeping the majority of the advantages provided by
the common output helpers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is a small helper that performs the basic steps required by all
output drivers to prepare the display controller for use with a given
encoder.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In order to transition output drivers to using the struct tegra_output
as a helper rather than midlayer, make this callback optional. Instead
drivers should implement the equivalent as part of ->mode_fixup(). For
the conversion to atomic modesetting a new callback ->atomic_check()
should be implemented that updates the display controller's state with
the corresponding parent clock, rate and shift clock divider.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The output layer was initially designed to help reduce the amount of
code duplicated in output drivers. An unfortunate side-effect of that
was that it turned into a midlayer and it became difficult to make the
output drivers work without bending over backwards to fit into the
midlayer.
This commit starts to convert the midlayer into a helper library by
exporting most of the common functions so that they can be used by the
output drivers directly. Doing so will allow output drivers to reuse
common code paths but more easily override them where necessary.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This structure will be extended using non-framebuffer related callbacks
in subsequent patches, so it should move to a more central location.
Signed-off-by: Thierry Reding <treding@nvidia.com>
All output drivers have open-coded variants of this function, so export
it to remove some code duplication.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thierry Reding