mirror of https://gitee.com/openkylin/linux.git
5988 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Dylan Reid
|
eb481f9ac9 |
ARM: tegra: add Acer Chromebook 13 device tree
The Acer Chromebook 13, codenamed Big, contains an NVIDIA tegra124 processor and is similar to the Venice2 reference platform. The keyboard, USB 2, audio, sdcard and emmc have been tested and work on the 1366x768 models. The Full HD models haven't been tested yet. WiFi does not yet work, it needs at least some PMIC changes to enable the 32k clock. The elan trackpad is not yet functional but hopefully will be soon as there are patches under review. There is also an issue on reboot because the TPM isn't reset. It will cause the stock firmware to enter recovery mode. This can be worked around by an EC-reset, press the refresh and power keys at the same time. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> |
|
|
Dylan Reid
|
edfbad068b |
ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi
These labels will be used by other boards in addition to Venice2, move them to tegra124.dtsi so they are defined in a common place. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> |
|
|
Stephen Warren
|
bf8f039230 |
ARM: tegra: add touchpad to Venice2 DT
Venice2 contains an Atmel MXT touchpad. Add an I2C node for it to DT. The Linux driver doesn't quite work on this platform yet, but adding the DT node causes no issues, and will allow the device to work once the driver is fixed. Signed-off-by: Stephen Warren <swarren@nvidia.com> |
|
|
Thierry Reding
|
b10231344f |
ARM: tegra: Add device tree nodes for flow controller
These nodes are required so that the flow controller driver can obtain the I/O memory region from device tree rather than hard-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> |
|
|
Stephen Warren
|
b0da12d59d |
ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
This pinmux tables currently omit any configuration for PCIe clk_req, wake, and rst pins, which in turn causes intermittent failures in U-Boot's PCIe support. Import an updated version of the pinmux tables which rectifies this. (While I'm still hoping to remove the pinmux tables from DTs for Tegra124+ devices, while they're still here, they may as well be complete and correct). Signed-off-by: Stephen Warren <swarren@nvidia.com> |
|
|
Mikko Perttunen
|
1b3ce99f93 |
ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
This enables the integrated SATA controller on the Tegra124 system-on-chip on the Jetson TK1 board and adds regulators for the onboard Molex connector commonly used to power SATA devices. The regulators are marked always-on since they can be used for other purposes than powering SATA devices. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> [swarren, fixed node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com> |
|
|
Mikko Perttunen
|
fdd690969b |
ARM: tegra: Add SATA controller to Tegra124 device tree
This adds the integrated AHCI-compliant Serial ATA controller present in Tegra124 systems-on-chip to the Tegra124 device tree. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> [swarren, fixed node sort order] Signed-off-by: Stephen Warren <swarren@nvidia.com> |
|
|
Geert Uytterhoeven
|
12266db732 |
ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts
refers to non-existent pinmux configuration data:
pinmux core: sh-pfc does not support function i2c6
sh-pfc e6060000.pfc: invalid function i2c6 in map table
Remove it to fix this.
Fixes: commit
|
|
|
Marcel Ziswiler
|
caa9eac5bc |
ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies
Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. (Note: When back-porting this to v3.16 stable releases, simply drop the change to tegra30-apalis.dtsi; that file was added in v3.17) Cc: <stable@vger.kernel.org> #v3.16+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
9d0b1f345e |
Pinctrl that got accidentially dropped when reorganizing the
dts files and addition of the new Rockchip list to MAINTAINERS. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCAAGBQJT+hwkAAoJEPOmecmc0R2Bda4IAJ7rxypWxi8RtfxULHu1oGxZ cdmAsaedAkjTn6tye/99lv1WkLzUD+Q3AxLX6Glu8PgTkocbwtkVTP+gMbv7zwfN Z9bA6kazPL4Rskr6Am8BFKkGhXHCXChGP1J3z9Gyh07Vu2+3zsvRzyM7hySt3TqZ EA2dL/uODlukw6EPzFaqGWZLn1OuJmkHXDfnZ3lBI/GFZD9qt5DnYswMBlDlIwr6 D08jmcleRA3wpnY1HXYR2cN1sJmcEP6xVE8ApXd71X0MtumEy49ZTR+4T5/Sh/XN OPheoH3UUVtXVrAa5fsoUE2xsKs3PZgnIHk1kQklpbw+HArbN+aW0Jh6CySb65Q= =aNJj -----END PGP SIGNATURE----- Merge tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner: Pinctrl that got accidentially dropped when reorganizing the dts files and addition of the new Rockchip list to MAINTAINERS. * tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Heiko Stuebner
|
1302d32c84 |
ARM: dts: rockchip: readd missing mmc0 pinctrl settings
During the restructuring of the Rockchip Cortex-A9 dtsi files it seems like the pinctrl settings vanished at some point from the mmc0 support. This of course renders them unusable, so readd the necessary pinctrl properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
|
|
Olof Johansson
|
2136edf3bf |
Allwinner DT changes, take 2
Only a single patch in here that fixes a DTC warning. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJT2hD6AAoJEBx+YmzsjxAgV9YP/1wML2m04CODnLmLhKyx1GyM VyBoEHb+o7P7TRyK7ePIVkGhGnQjYGMyXAI2KfOiBJpAl23uxXCXSNKc6WY+nBAw 6T6qL6w+tPIPW4B79fAjmoPksqhoVf9sAKAkdu6+ETwKMHRaF0IesPRTg9t21Wcd yHHDY4z/qaFCMV59zeOIWMxM0V0gvUa46+bXC2flyTcTz5RgyUswCOXKHLvXfK1L w8B+V34AeBtm2EzG6co1iOJVRKXlrjzUg25+adbRissNfvmVkPwYkQJNoBO6r/PO Rxf7Mq50oovPl/Oc83e3RZl3tE8ds12t+ScS0qUFq6+tBvyq53IYP+51IhDOGiR3 a6PB1nPEXtvUt09xv5SPJiRsB+BFrh5hx+qWbDvUNQL5FZrqBxa63H6qArybFQXg GaY8Zv5gdiMvAU0tdk7v4pduJkvvoG2GALGHPrcKmrpg2+qQ4LDKOJxErIEqOUi2 ERp7c0kODDz18F9OmjGYU2R7XT6Ji8h4MS/hbCiLajcboQMe3yClrcVB8ts+AUKJ NSDWl5Q0/8uHhk40FAaGYEqVLakk8vhXwdg1hpcXzIg3dJg+P09dYK5nIOBzKIok +eVXZ8xjcRnoBAumljZ3eGbTuysGDO95E56coDPE4IiAe4Esi7kl3fUS/NICoOGs MC9tjeyMoscy+hoGsP57 =PL45 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner DT changes, take 2" from Maxime Ripard: Only a single patch in here that fixes a DTC warning. * tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Daniel Drake
|
95d516b9fc |
ARM: dts: ODROID i2c improvements
Increase max i2c bus frequency beyond the default for faster data transfers. According to the manual, these faster speeds are only available when the board is wired up the right way. In this case, the vendor kernel has run at this speed for a long time. sda-delay is needed for talking to RTC on PMIC, otherwise the i2c controller never sees an ACK. Strangely the other PMIC i2c slave (the main one) works fine even without this delay. I Chose value 100 to match the vendor kernel. Signed-off-by: Daniel Drake <drake@endlessm.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Daniel Drake
|
4cde3733da |
ARM: dts: Enable PMIC interrupts on ODROID
The ODROID kernel shows that the PMIC interrupt line is hooked up to pin GPX3-2. This is needed for the max77686-irq driver to create the PMIC IRQ domain, which is needed by max77686-rtc. Signed-off-by: Daniel Drake <drake@endlessm.com> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Fugang Duan
|
3bc4d037c6 |
ARM: dts: imx6sx: fix the pad setting for uart CTS_B
The current pinfunc define all uart CTS_B IO port for DCE uart 'CTS_B' IP port. Since uart IP port 'CTS_B' is output, and it don't need to set 'SELECT_INPUT' bit. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> |
|
|
Lothar Waßmann
|
fa97d2f744 |
ARM: dts: i.MX53: fix apparent bug in VPU clks
The VPU on i.MX53 has two distinct clocks for register access and
internal function.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Fixes:
|
|
|
Silvio Fricke
|
2f643105e5 |
ARM: dts: imx6: edmqmx6: change enet reset pin
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> |
|
|
Bill Pringlemeir
|
0aa4dcb5b7 |
ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions.
Previous version had an extra 'fsl' which made the pins not match
any entry. The console message,
vf610-pinctrl 40048000.iomuxc: no fsl,pins property in node \
/soc/aips-bus@40000000/iomuxc@40048000/vf610-twr/esdhc1grp
is displayed without the fix. The prior version would generally
work as u-boot sets the pins properly for sdhc. This change allows
Linux sdhc use even if u-boot is built without sdhc support.
Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Fixes:
|
|
|
Linus Torvalds
|
ae36e95cf8 |
The branch contains the following device tree changes the v3.17 merge
window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJT6M7XAAoJEMWQL496c2LNTTgP/2rXyrTTGZpK/qrLKHWKYHvr XL7tcTkhA0OLU64E37fB+xtDXyBYnLsharuwUFSd1LlL1Wnc1cZN5ORRlMJbmjUR Wvwl0A8/mkhGl4tzzKgJ4z4rMJXvlZfJRpnVoRB5FOn90LI7k/jsf5rIwF/6S90B 6D6II0r4RG9ku1m7g70cToxcIFCzp0V+eu2tym9GnhsyGKlunPT9iNiTpwfVhPAj QUvMPKIQXReOv6xDU5q6E07839IMf7SdAvciBTHGnCDD7sGziHvnBIShj/2vTDAF 27sGRKrWUnnuxRUMOoIudiYyeHXIdt1WXp6FsS/ztVI37Ijh9YPShJwWGhQDppnp 4tcoSdefqw9IRUajAVWsB0RUW/tCL4a7tggWofylOA6itDi+HZnw6YafE1G1YzxF q8OFo9uqLcmFQfHDJpk+sdtXoMZzOgrxlEscsGsQ8kd2Uoe8+chgR9EY1sqPkWVF Zw0FJCTB6spBlsnXeboBGrnvpbPkacwhvesIFO0IANy4j4R55xlEeTcs1fe3ubUf UhNyyFdnCAUA7e5CAabcAQYsdbEKG6v0Il3H6xts36c8lXCSFXVgNcw5mdCpFCcQ DZ3/1FGSVzkYNXX8hlzIn1W0dqvwn4x0ZbnpXUJrGUBpSmjt9qkXx0XbdeFwartU 7X4tNGS1jfNYhOdP87jF =8IFz -----END PGP SIGNATURE----- Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux Pull device tree updates from Grant Likely: "The branch contains the following device tree changes the v3.17 merge window: Group changes to the device tree. In preparation for adding device tree overlay support, OF_DYNAMIC is reworked so that a set of device tree changes can be prepared and applied to the tree all at once. OF_RECONFIG notifiers see the most significant change here so that users always get a consistent view of the tree. Notifiers generation is moved from before a change to after it, and notifiers for a group of changes are emitted after the entire block of changes have been applied Automatic console selection from DT. Console drivers can now use of_console_check() to see if the device node is specified as a console device. If so then it gets added as a preferred console. UART devices get this support automatically when uart_add_one_port() is called. DT unit tests no longer depend on pre-loaded data in the device tree. Data is loaded dynamically at the start of unit tests, and then unloaded again when the tests have completed. Also contains a few bugfixes for reserved regions and early memory setup" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits) of: Fixing OF Selftest build error drivers: of: add automated assignment of reserved regions to client devices of: Use proper types for checking memory overflow of: typo fix in __of_prop_dup() Adding selftest testdata dynamically into live tree of: Add todo tasklist for Devicetree of: Transactional DT support. of: Reorder device tree changes and notifiers of: Move dynamic node fixups out of powerpc and into common code of: Make sure attached nodes don't carry along extra children of: Make devicetree sysfs update functions consistent. of: Create unlocked versions of node and property add/remove functions OF: Utility helper functions for dynamic nodes of: Move CONFIG_OF_DYNAMIC code into a separate file of: rename of_aliases_mutex to just of_mutex of/platform: Fix of_platform_device_destroy iteration of devices of: Migrate of_find_node_by_name() users to for_each_node_by_name() tty: Update hypervisor tty drivers to use core stdout parsing code. arm/versatile: Add the uart as the stdout device. of: Enable console on serial ports specified by /chosen/stdout-path ... |
|
|
Grant Likely
|
b775e642bf | Merge branch 'devicetree/next-console' into devicetree/next | |
|
Stephen Rothwell
|
ee34fb97a9 |
ARM: dts: exynos5420: remove disp_pd
This was caused by commit |
|
|
Doug Anderson
|
c9c32c5049 |
ARM: dts: Fix the sort ordering of EHCI and HSIC in rk3288.dtsi
The EHCI and HSIC device tree nodes were added in the wrong place. Fix them. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Linus Torvalds
|
664fb23070 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ... |
|
|
Linus Torvalds
|
10c8e05620 |
ARM: SoC driver changes for 3.17
A handful of driver-related changes. We've had a bunch of them going in through
other branches as well, so it's only a part of what we really have this release.
Larger pieces are:
* Removal of a now unused PWM driver for atmel
- This includes AVR32 changes that have been appropriately acked.
* Performance counter support for the arm CCN interconnect
* OMAP mailbox driver cleanups and consolidation
* PCI and SATA PHY drivers for SPEAr 13xx platforms
* Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to
better model regulators/power.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=fsP6
-----END PGP SIGNATURE-----
Merge tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver changes from Olof Johansson:
"A handful of driver-related changes. We've had a bunch of them going
in through other branches as well, so it's only a part of what we
really have this release.
Larger pieces are:
- Removal of a now unused PWM driver for atmel
[ This includes AVR32 changes that have been appropriately acked ]
- Performance counter support for the arm CCN interconnect
- OMAP mailbox driver cleanups and consolidation
- PCI and SATA PHY drivers for SPEAr 13xx platforms
- Redefinition (with backwards compatibility!) of PCI DT bindings for
Tegra to better model regulators/power"
Note: this merge also fixes up the semantic conflict with the new
calling convention for devm_phy_create(), see commit
|
|
|
Linus Torvalds
|
d4e1f5a14e |
ARM: SoC device-tree changes for 3.17
Unlike the board branch, this keeps having large sets of changes for
every release, but that's quite expected and is so far working well.
Most of this is plumbing for various device bindings and new platforms,
but there's also a bit of cleanup and code removal for things that
are moved from platform code to DT contents (some OMAP clock code in
particular).
There's also a pinctrl driver for tegra here (appropriately acked),
that's introduced this way to make it more bisectable.
I'm happy to say that there were no conflicts at all with this branch
this release, which means that changes are flowing through our tree as
expected instead of merged through driver maintainers (or at least not
done with conflicts).
There are several new boards added, and a couple of SoCs. In no particular
order:
* Rockchip RK3288 SoC support, including DTS for a dev board that they
have seeded with some community developers.
* Better support for Hardkernel Exynos4-based ODROID boards.
* CCF conversions (and dtsi contents) for several Renesas platforms.
* Gumstix Pepper (TI AM335x) board support
* TI eval board support for AM437x
* Allwinner A23 SoC, very similar to existing ones which mostly has
resulted in DT changes for support. Also includes support for an Ippo
tablet with the chipset.
* Allwinner A31 Hummingbird board support, not to be confused with the
SolidRun i.MX-based Hummingboard.
* Tegra30 Apalis board support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=xxlY
-----END PGP SIGNATURE-----
Merge tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device-tree changes from Olof Johansson:
"Unlike the board branch, this keeps having large sets of changes for
every release, but that's quite expected and is so far working well.
Most of this is plumbing for various device bindings and new
platforms, but there's also a bit of cleanup and code removal for
things that are moved from platform code to DT contents (some OMAP
clock code in particular).
There's also a pinctrl driver for tegra here (appropriately acked),
that's introduced this way to make it more bisectable.
I'm happy to say that there were no conflicts at all with this branch
this release, which means that changes are flowing through our tree as
expected instead of merged through driver maintainers (or at least not
done with conflicts).
There are several new boards added, and a couple of SoCs. In no
particular order:
- Rockchip RK3288 SoC support, including DTS for a dev board that
they have seeded with some community developers.
- Better support for Hardkernel Exynos4-based ODROID boards.
- CCF conversions (and dtsi contents) for several Renesas platforms.
- Gumstix Pepper (TI AM335x) board support
- TI eval board support for AM437x
- Allwinner A23 SoC, very similar to existing ones which mostly has
resulted in DT changes for support. Also includes support for an
Ippo tablet with the chipset.
- Allwinner A31 Hummingbird board support, not to be confused with
the SolidRun i.MX-based Hummingboard.
- Tegra30 Apalis board support"
* tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits)
ARM: dts: Enable USB host0 (EHCI) on rk3288-evb
ARM: dts: add rk3288 ehci usb devices
ARM: dts: Turn on USB host vbus on rk3288-evb
ARM: tegra: apalis t30: fix device tree compatible node
ARM: tegra: paz00: Fix some indentation inconsistencies
ARM: zynq: DT: Clarify Xilinx Zynq platform
ARM: dts: rockchip: add watchdog node
ARM: dts: rockchip: remove pinctrl setting from radxarock uart2
ARM: dts: Add missing pinctrl for uart0/1 for exynos3250
ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250
ARM: dts: Add TMU dt node to monitor the temperature for exynos3250
ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250
ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only
ARM: dts: max77686 is exynos5250-snow only
ARM: zynq: DT: Remove DMA from board DTs
ARM: zynq: DT: Add CAN node
ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table
ARM: dts: Add PMU DT node for exynos5260 SoC
ARM: EXYNOS: Add support for Exynos5410 PMU
ARM: dts: Add PMU to exynos5410
...
|
|
|
Linus Torvalds
|
b3345d7c57 |
ARM: SoC platform changes for 3.17
This is the bulk of new SoC enablement and other platform changes for 3.17:
* Samsung S5PV210 has been converted to DT and multiplatform
* Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms
* Kirkwood, one of the popular Marvell platforms, is folded into the
mvebu platform code, removing mach-kirkwood.
* Hwmod data for TI AM43xx and DRA7 platforms.
* More additions of Renesas shmobile platform support
* Removal of plat-samsung contents that can be removed with S5PV210 being
multiplatform/DT-enabled and the other two old platforms being removed.
New platforms (most with only basic support right now):
* Hisilicon X5HD2 settop box chipset is introduced
* Mediatek MT6589 (mobile chipset) is introduced
* Broadcom BCM7xxx settop box chipset is introduced
+ as usual a lot other pieces all over the platform code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=5TJ6
-----END PGP SIGNATURE-----
Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"This is the bulk of new SoC enablement and other platform changes for
3.17:
- Samsung S5PV210 has been converted to DT and multiplatform
- Clock drivers and bindings for some of the lower-end i.MX 1/2
platforms
- Kirkwood, one of the popular Marvell platforms, is folded into the
mvebu platform code, removing mach-kirkwood
- Hwmod data for TI AM43xx and DRA7 platforms
- More additions of Renesas shmobile platform support
- Removal of plat-samsung contents that can be removed with S5PV210
being multiplatform/DT-enabled and the other two old platforms
being removed
New platforms (most with only basic support right now):
- Hisilicon X5HD2 settop box chipset is introduced
- Mediatek MT6589 (mobile chipset) is introduced
- Broadcom BCM7xxx settop box chipset is introduced
+ as usual a lot other pieces all over the platform code"
* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
ARM: hisi: remove smp from machine descriptor
power: reset: move hisilicon reboot code
ARM: dts: Add hix5hd2-dkb dts file.
ARM: debug: Rename Hi3716 to HIX5HD2
ARM: hisi: enable hix5hd2 SoC
ARM: hisi: add ARCH_HISI
MAINTAINERS: add entry for Broadcom ARM STB architecture
ARM: brcmstb: select GISB arbiter and interrupt drivers
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
ARM: configs: enable SMP in bcm_defconfig
ARM: add SMP support for Broadcom mobile SoCs
Documentation: arm: misc updates to Marvell EBU SoC status
Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
ARM: mvebu: fix build without platforms selected
ARM: mvebu: add cpuidle support for Armada 38x
ARM: mvebu: add cpuidle support for Armada 370
cpuidle: mvebu: add Armada 38x support
cpuidle: mvebu: add Armada 370 support
cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
ARM: mvebu: export the SCU address
...
|
|
|
Linus Torvalds
|
44c916d58b |
ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
platforms. Among the bigger ones:
* Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
lacked active support for quite a while, and after asking around nobody
showed interest in keeping them around. If needed, they could be
resurrected in the future but it's more likely that we would prefer
reintroduction of them as DT and multiplatform-enabled platforms
instead.
* OMAP4 controller code register define diet. They defined a lot of registers
that were never actually used, etc.
* Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
to drivers/soc so it can be shared with 64-bit code. This also converts them
over to traditional driver models where possible.
* Removal of legacy gpio-samsung driver, since the last users have been
removed (moved to pinctrl)
Plus a bunch of smaller changes for various platforms that sort of
dissapear in the diffstat for the above. clps711x cleanups, shmobile
header file refactoring/moves for multiplatform friendliness, some misc
cleanups, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=gbcE
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This merge window brings a good size of cleanups on various platforms.
Among the bigger ones:
- Removal of Samsung s5pc100 and s5p64xx platforms. Both of these
have lacked active support for quite a while, and after asking
around nobody showed interest in keeping them around. If needed,
they could be resurrected in the future but it's more likely that
we would prefer reintroduction of them as DT and
multiplatform-enabled platforms instead.
- OMAP4 controller code register define diet. They defined a lot of
registers that were never actually used, etc.
- Move of some of the Tegra platform code (PMC, APBIO, fuse,
powergate) to drivers/soc so it can be shared with 64-bit code.
This also converts them over to traditional driver models where
possible.
- Removal of legacy gpio-samsung driver, since the last users have
been removed (moved to pinctrl)
Plus a bunch of smaller changes for various platforms that sort of
dissapear in the diffstat for the above. clps711x cleanups, shmobile
header file refactoring/moves for multiplatform friendliness, some
misc cleanups, etc"
* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
drivers: CCI: Correct use of ! and &
video: clcd-versatile: Depend on ARM
video: fix up versatile CLCD helper move
MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
MAINTAINERS: Remove Kirkwood
ARM: tegra: Convert PMC to a driver
soc/tegra: fuse: Set up in early initcall
ARM: tegra: Always lock the CPU reset vector
ARM: tegra: Setup CPU hotplug in a pure initcall
soc/tegra: Implement runtime check for Tegra SoCs
soc/tegra: fuse: fix dummy functions
soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
soc/tegra: Add efuse and apbmisc bindings
soc/tegra: Add efuse driver for Tegra
ARM: tegra: move fuse exports to soc/tegra/fuse.h
ARM: tegra: export apb dma readl/writel
ARM: tegra: Use a function to get the chip ID
ARM: tegra: Sort includes alphabetically
ARM: tegra: Move includes to include/soc/tegra
...
|
|
|
Linus Torvalds
|
a7d7a143d0 |
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull DRM updates from Dave Airlie: "Like all good pull reqs this ends with a revert, so it must mean we tested it, [ Ed. That's _one_ way of looking at it ] This pull is missing nouveau, Ben has been stuck trying to track down a very longstanding bug that revealed itself due to some other changes. I've asked him to send you a direct pull request for nouveau once he cleans things up. I'm away until Monday so don't want to delay things, you can make a decision on that when he sends it, I have my phone so I can ack things just not really merge much. It has one trivial conflict with your tree in armada_drv.c, and also the pull request contains some component changes that are already in your tree, the base tree from Russell went via Greg's tree already, but some stuff still shows up in here that doesn't when I merge my tree into yours. Otherwise all pretty standard graphics fare, one new driver and changes all over the place. New drivers: - sti kms driver for STMicroelectronics chipsets stih416 and stih407. core: - lots of cleanups to the drm core - DP MST helper code merged - universal cursor planes. - render nodes enabled by default panel: - better panel interfaces - new panel support - non-continuous cock advertising ability ttm: - shrinker fixes i915: - hopefully ditched UMS support - runtime pm fixes - psr tracking and locking - now enabled by default - userptr fixes - backlight brightness fixes - MST support merged - runtime PM for dpms - primary planes locking fixes - gen8 hw semaphore support - fbc fixes - runtime PM on SOix sleep state hw. - mmio base page flipping - lots of vlv/chv fixes. - universal cursor planes radeon: - Hawaii fixes - display scalar support for non-fixed mode displays - new firmware format support - dpm on more asics by default - GPUVM improvements - uncached and wc GTT buffers - BOs > visible VRAM exynos: - i80 interface support - module auto-loading - ipp driver consolidated. armada: - irq handling in crtc layer only - crtc renumbering - add component support - DT interaction changes. tegra: - load as module fixes - eDP bpp and sync polarity fixed - DSI non-continuous clock mode support - better support for importing buffers from nouveau msm: - mdp5/adq8084 v1.3 hw enablement - devicetree clk changse - ifc6410 board working tda998x: - component support - DT documentation update vmwgfx: - fix compat shader namespace" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (551 commits) Revert "drm: drop redundant drm_file->is_master" drm/panel: simple: Use devm_gpiod_get_optional() drm/dsi: Replace upcasting macro by function drm/panel: ld9040: Replace upcasting macro by function drm/exynos: dp: Modify driver to support drm_panel drm/exynos: Move DP setup into commit() drm/panel: simple: Add AUO B133HTN01 panel support drm/panel: simple: Support delays in panel functions drm/panel: simple: Add proper definition for prepare and unprepare drm/panel: s6e8aa0: Add proper definition for prepare and unprepare drm/panel: ld9040: Add proper definition for prepare and unprepare drm/tegra: Add support for panel prepare and unprepare routines drm/exynos: dsi: Add support for panel prepare and unprepare routines drm/exynos: dpi: Add support for panel prepare and unprepare routines drm/panel: simple: Add dummy prepare and unprepare routines drm/panel: s6e8aa0: Add dummy prepare and unprepare routines drm/panel: ld9040: Add dummy prepare and unprepare routines drm/panel: Provide convenience wrapper for .get_modes() drm/panel: add .prepare() and .unprepare() functions drm/panel: simple: Remove simple-panel compatible ... |
|
|
Linus Torvalds
|
e0b8b78651 |
This is the bulk pin control changes for the v3.17 merge
development cycle:
- Get rid of the .disable() callback from the driver callback
vtable. This callback was abused and counterintuitive since
a pin or group of pins can be said to always be in some
setting, and never really disabled. We now only enable a
certain muxing, and move between some certain muxings, we
never "disable" a mux setting.
- Some janitorial moving the MSM, Samsung and Nomadik and
drivers to their own subdirectories for a clearer view in
the subsystem. This will continue.
- Kill off the use of the return value from gpiochip_remove(),
this will be done in parallel in the GPIO subsystem and
hopefully not trigger too many unchecked return value
warnings before we get rid of this altogether.
- A huge set of changes and improvements to the Allwinner
sunxi drivers especially for their latest A23 and A31 SoCs,
and some ground work for the new sun8i platform family.
- A large set of Rockchip driver improvements adding support
for the RK3288 SoC.
- Advances in migration of older Freescale platforms to pin
control, especially i.MX1.
- Samsung and Exynos improvements.
- Support for the Qualcomm MSM8960 SoC.
- Use the gpiolib irqchip helpers for the ST SPEAr and
Intel Baytrail drivers.
- A bunch of nice janitorial work done with cppcheck.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=t1pR
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pinctrl updates from Linus Walleij:
"This is the bulk pin control changes for the v3.17 merge development
cycle:
- get rid of the .disable() callback from the driver callback vtable.
This callback was abused and counterintuitive since a pin or group
of pins can be said to always be in some setting, and never really
disabled. We now only enable a certain muxing, and move between
some certain muxings, we never "disable" a mux setting
- some janitorial moving the MSM, Samsung and Nomadik and drivers to
their own subdirectories for a clearer view in the subsystem. This
will continue
- kill off the use of the return value from gpiochip_remove(), this
will be done in parallel in the GPIO subsystem and hopefully not
trigger too many unchecked return value warnings before we get rid
of this altogether
- a huge set of changes and improvements to the Allwinner sunxi
drivers especially for their latest A23 and A31 SoCs, and some
ground work for the new sun8i platform family
- a large set of Rockchip driver improvements adding support for the
RK3288 SoC
- advances in migration of older Freescale platforms to pin control,
especially i.MX1
- Samsung and Exynos improvements
- support for the Qualcomm MSM8960 SoC
- use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail
drivers
- a bunch of nice janitorial work done with cppcheck"
* tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits)
pinctrl: baytrail: Convert to use gpiolib irqchip
pinctrl: sunxi: number gpio ranges starting from 0
pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
pinctrl: rockchip: add drive-strength control for rk3288
pinctrl: rockchip: add separate type for rk3288
pinctrl: rockchip: set is_generic in pinconf_ops
pinctrl: msm: drop negativity check on unsigned value
pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
pinctrl: qcom: Make muxing of gpio function explicit
pinctrl: nomadik: move all Nomadik drivers to subdir
pinctrl: samsung: Group all drivers in a sub-dir
sh-pfc: sh73a0: Introduce the use of devm_regulator_register
sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
pinctrl: msm: move all qualcomm drivers to subdir
pinctrl: msm: Add msm8960 definitions
pinctrl: samsung: Allow pin value to be initialized using pinfunc
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
pinctrl: samsung: Decouple direction setting from pinctrl
...
|
|
|
Olof Johansson
|
c4846a7823 |
Merge branch 'next/fixes-non-critical' into next/cleanup
Merging in the few fixes we had also received, no need to keep those in a separate branch. * next/fixes-non-critical: drivers: CCI: Correct use of ! and & MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n ARM: omap2+: gpmc-nand: Use dynamic platform_device_alloc() omap16xx: Removes fixme no longer needed in ocpi_enable() ARM: dts: OMAP5: Add device nodes for ABB ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Linus Torvalds
|
ae045e2455 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Highlights:
1) Steady transitioning of the BPF instructure to a generic spot so
all kernel subsystems can make use of it, from Alexei Starovoitov.
2) SFC driver supports busy polling, from Alexandre Rames.
3) Take advantage of hash table in UDP multicast delivery, from David
Held.
4) Lighten locking, in particular by getting rid of the LRU lists, in
inet frag handling. From Florian Westphal.
5) Add support for various RFC6458 control messages in SCTP, from
Geir Ola Vaagland.
6) Allow to filter bridge forwarding database dumps by device, from
Jamal Hadi Salim.
7) virtio-net also now supports busy polling, from Jason Wang.
8) Some low level optimization tweaks in pktgen from Jesper Dangaard
Brouer.
9) Add support for ipv6 address generation modes, so that userland
can have some input into the process. From Jiri Pirko.
10) Consolidate common TCP connection request code in ipv4 and ipv6,
from Octavian Purdila.
11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.
12) Generic resizable RCU hash table, with intial users in netlink and
nftables. From Thomas Graf.
13) Maintain a name assignment type so that userspace can see where a
network device name came from (enumerated by kernel, assigned
explicitly by userspace, etc.) From Tom Gundersen.
14) Automatic flow label generation on transmit in ipv6, from Tom
Herbert.
15) New packet timestamping facilities from Willem de Bruijn, meant to
assist in measuring latencies going into/out-of the packet
scheduler, latency from TCP data transmission to ACK, etc"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
cxgb4 : Disable recursive mailbox commands when enabling vi
net: reduce USB network driver config options.
tg3: Modify tg3_tso_bug() to handle multiple TX rings
amd-xgbe: Perform phy connect/disconnect at dev open/stop
amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
net: sun4i-emac: fix memory leak on bad packet
sctp: fix possible seqlock seadlock in sctp_packet_transmit()
Revert "net: phy: Set the driver when registering an MDIO bus device"
cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
team: Simplify return path of team_newlink
bridge: Update outdated comment on promiscuous mode
net-timestamp: ACK timestamp for bytestreams
net-timestamp: TCP timestamping
net-timestamp: SCHED timestamp on entering packet scheduler
net-timestamp: add key to disambiguate concurrent datagrams
net-timestamp: move timestamp flags out of sk_flags
net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
cxgb4i : Move stray CPL definitions to cxgb4 driver
tcp: reduce spurious retransmits due to transient SACK reneging
qlcnic: Initialize dcbnl_ops before register_netdev
...
|
|
|
Linus Torvalds
|
1325b6550a |
spi: Updates for v3.17
A quiet release, more bug fixes than anything else. A few things do
stand out though:
- Updates to several drivers to move towards the standard GPIO chip
select handling in the core.
- DMA support for the SH MSIOF driver.
- Support for Rockchip SPI controllers (their first mainline
submission).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJT4RsmAAoJELSic+t+oim9Kd0P/A3bTbf7UiK9t3NgbpIDO+yJ
JHe8O5OtxeAWGiuv9RF47Gutr8061Rww0yzX2+iiRBkaOYE7TZfdUVSBT8LnTrw6
WFye5pmxy25mDX97OJnhlsddPEoCxb/a4MlcqcCxULsHcyU9jIM+uId1v6LxMC3d
QtuB2Fuxzhhqmdfg9NLdsVsMWiwVwZn20Cmxt7Fc9EzwK6BBs1U50/X/wJHzBQ4K
fbl3hwxKODBd7aMG9DRHt4cW04WG5wQYkJS54ThUAROebqjEx8YWbNIszKA1fQcW
jBcd8Oieo724/jGZq1/U4RJUpRKmwx/ug31nrYx/Mcp+Za+yIZ1dwxAcK5AkdJNa
1lw5LGMLcP04EN0pdKKyrVwwkzV60fwrV9ELcZcnbpKhcvR0G4g7pbKufNIcGu64
0RGTnq1Y0HD1/0Zcomdt1oSSA4gv1B2Va7ZBM/SaphA+MW6EN0KfGMmcopJA5gAD
Dv66ijnIUjkKqJb4HsWa4gcq6EnqiK/GUzr9Pjng4ogl8/OF+OYOa+mYnj4DP98p
aXy/IUKSNDRwY6tV6Z4eEXnhsHWmkzfqYwZoEZVZIR7Dytl1oxdK4kW5BC0hJRc1
DrgnVMgxsIMfVD3RVbqLN4zPyFBmKHwXrcTMHQuv4ndfhiDck0u4uiF5CNCap1I1
ThAHObRbw+X/9D0ywFK/
=u37g
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A quiet release, more bug fixes than anything else. A few things do
stand out though:
- updates to several drivers to move towards the standard GPIO chip
select handling in the core.
- DMA support for the SH MSIOF driver.
- support for Rockchip SPI controllers (their first mainline
submission)"
* tag 'spi-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
spi: davinci: use spi_device.cs_gpio to store gpio cs per spi device
spi: davinci: add support to configure gpio cs through dt
spi/pl022: Explicitly truncate large bitmask
spi/atmel: Fix pointer to int conversion warnings on 64 bit builds
spi: davinci: fix to support more than 2 chip selects
spi: topcliff-pch: don't hardcode PCI slot to get DMA device
spi: orion: fix incorrect handling of cell-index DT property
spi: orion: Fix error return code in orion_spi_probe()
spi/rockchip: fix error return code in rockchip_spi_probe()
spi/rockchip: remove redundant dev_err call in rockchip_spi_probe()
spi/rockchip: remove duplicated include from spi-rockchip.c
ARM: dts: fix the chip select gpios definition in the SPI nodes
spi: s3c64xx: Update binding documentation
spi: s3c64xx: use the generic SPI "cs-gpios" property
spi: s3c64xx: Revert "spi: s3c64xx: Added provision for dedicated cs pin"
spi: atmel: Use dmaengine_prep_slave_sg() API
spi: topcliff-pch: Update error messages for dmaengine_prep_slave_sg() API
spi: sh-msiof: Use correct device for DMA mapping with IOMMU
spi: sh-msiof: Handle dmaengine_prep_slave_single() failures gracefully
spi: rspi: Handle dmaengine_prep_slave_sg() failures gracefully
...
|
|
|
Linus Torvalds
|
ae9b475ebe |
USB patches for 3.17-rc1
Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf2ZIACgkQMUfUDdst+ylvQwCfQKPKcwhtq4vJ2imUzJROEZwN ygYAnRpFpH/19X59uGSdE7DAdhbitqKg =uPh1 -----END PGP SIGNATURE----- Merge tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB driver update for 3.17-rc1. Loads of gadget driver changes in here, including some big file movements to make things easier to manage over time. There's also the usual xhci and uas driver updates, and a handful of other changes in here. The changelog has the full details. All of these have been in linux-next for a while" * tag 'usb-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (211 commits) USB: devio: fix issue with log flooding uas: Log a warning when we cannot use uas because the hcd lacks streams uas: Only complain about missing sg if all other checks succeed xhci: Add missing checks for xhci_alloc_command failure xhci: Rename Asrock P67 pci product-id to EJ168 xhci: Blacklist using streams on the Etron EJ168 controller uas: Limit qdepth to 32 when connected over usb-2 uwb/whci: use correct structure type name in sizeof usb-core bInterval quirk USB: serial: ftdi_sio: Add support for new Xsens devices USB: serial: ftdi_sio: Annotate the current Xsens PID assignments usb: chipidea: debug: fix sparse non static symbol warnings usb: ci_hdrc_imx doc: fsl,usbphy is required usb: ci_hdrc_imx: Return -EINVAL for missing USB PHY usb: core: allow zero packet flag for interrupt urbs usb: lvstest: Fix sparse warnings generated by kbuild test bot USB: core: hcd-pci: free IRQ before disabling PCI device when shutting down phy: miphy365x: Represent each PHY channel as a DT subnode phy: miphy365x: Provide support for the MiPHY356x Generic PHY phy: miphy365x: Add Device Tree bindings for the MiPHY365x ... |
|
|
Linus Torvalds
|
79eb238c76 |
TTY / Serial driver update for 3.17-rc1
Here's the big tty / serial driver update for 3.17-rc1. Nothing major, just a number of fixes and new features for different serial drivers, and some more tty core fixes and documentation of the tty locks. All of these have been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf2C4ACgkQMUfUDdst+yllVgCgtZl/Mcr/LlxPgjsg2C1AE7nX YJ4An3o4N112bkdGqhZ7RjAE6K/8YILx =rPhE -----END PGP SIGNATURE----- Merge tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver update from Greg KH: "Here's the big tty / serial driver update for 3.17-rc1. Nothing major, just a number of fixes and new features for different serial drivers, and some more tty core fixes and documentation of the tty locks. All of these have been in linux-next for a while" * tag 'tty-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (82 commits) tty/n_gsm.c: fix a memory leak in gsmld_open pch_uart: don't hardcode PCI slot to get DMA device tty: n_gsm, use setup_timer Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console" serial: sc16is7xx: Correct initialization of s->clk serial: 8250_dw: Add support for deferred probing serial: 8250_dw: Add optional reset control support serial: st-asc: Fix overflow in baudrate calculation serial: st-asc: Don't call BUG in asc_console_setup() tty: serial: msm: Make of_device_id array const tty/n_gsm.c: get gsm->num after gsm_activate_mux serial/core: Fix too big allocation for attribute member drivers/tty/serial: use correct type for dma_map/unmap serial: altera_jtaguart: Fix putchar function passed to uart_console_write() serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers Serial: allow port drivers to have a default attribute group tty: kgdb_nmi: Automatically manage tty enable serial: altera_jtaguart: Adpot uart_console_write() serial: samsung: improve code clarity by defining a variable serial: samsung: correct the case and default order in switch ... |
|
|
Linus Torvalds
|
53ee983378 |
Staging driver patches for 3.17-rc1
Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlPf1wYACgkQMUfUDdst+ykrNwCgswPkRSAPQ3C8WvLhzUYRZZ/L AqEAoJP0Q8Fz8unXjlSMcx7pgcqUaJ8G =mrTQ -----END PGP SIGNATURE----- Merge tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while" * tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits) staging: comedi: addi_apci_1564: remove diagnostic interrupt support code staging: comedi: addi_apci_1564: add subdevice to check diagnostic status staging: wlan-ng: coding style problem fix staging: wlan-ng: fixing coding style problems staging: comedi: ii_pci20kc: request and ioremap memory staging: lustre: bitwise vs logical typo staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h staging: dgnc: rephrase comment staging: comedi: ni_tio: remove some dead code staging: rtl8723au: Fix static symbol sparse warning staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc' staging: rtl8723au: Do not duplicate kernel provided USB macros staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown staging: rtl8723au: Remove two never set variables staging: rtl8723au: RSSI_test is never set staging:r8190: coding style: Fixed checkpatch reported Error staging:r8180: coding style: Fixed too long lines staging:r8180: coding style: Fixed commenting style staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer ... |
|
|
Dave Airlie
|
5d42f82a9b |
Linux 3.16
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJT3rbVAAoJEHm+PkMAQRiGBc0H/0PcAqZ66KqBrjCaC7tlR9ZJ Oyv4usrPpVmJaCaYiNwc4KnkJXDfc/foEtZq32vYSb4d8xaOLta3DrT8YJTS7B7T Afdg8FbVdSjBD0S8It35XidmZlOaVrgGJGpDIRBRrqDwPPgbWpTeUR73bfkwoA/R ziW+78s0mquo9hN9Bdu3apr7XxVmzeIUx6lJxKPCoXNEGTsSC7ibCzZRzZDMpag/ D1JrQbE0XevgEu5fWrJkcqKceUzi3I1wuKZvBIJm2aX5XDsKpYNfQL6ViJDW56dK LhrB8vex8gkQYSCVPyUKx4BjkdPourSICSKq+h0SwhOCpHVHPmG8XM3J4/U4a7U= =yoNZ -----END PGP SIGNATURE----- Merge tag 'v3.16' into drm-next Linux 3.16 backmerge requested by i915, nouveau and radeon authors Conflicts: drivers/gpu/drm/i915/i915_gem_render_state.c drivers/gpu/drm/i915/intel_drv.h |
|
|
Linus Torvalds
|
e4ca4308c0 |
The clock framework changes for 3.17 are mostly additions of new clock
drivers and fixes/enhancements to existing clock drivers. There are also
some non-critical fixes and improvements to the framework core.
Changes to the clock framework core include:
* improvements to printks on errors
* flattening the previously hierarchal structure of per-clock entries
in debugfs
* allow per-clock debugfs entries that are specific to a particular
clock driver
* configure initial clock parent and/or initial clock rate from Device
Tree
* several feature enhancements to the composite clock type
* misc fixes
New clock drivers added include:
* TI Palmas PMIC
* Allwinner A23 SoC
* Qualcomm APQ8084 and IPQ8064 SoCs
* Rockchip rk3188, rk3066 and rk3288 SoCs
* STMicroelectronics STiH407 SoC
* Cirrus Logic CLPS711X SoC
Many fixes, feature enhancements and further clock tree support for
existing clock drivers also were merged, such as Samsung's "ARMCLK down"
power saving feature for their Exynos4 & Exynos5 SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=48y9
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux
Pull clock framework updates from Mike Turquette:
"The clock framework changes for 3.17 are mostly additions of new clock
drivers and fixes/enhancements to existing clock drivers. There are
also some non-critical fixes and improvements to the framework core.
Changes to the clock framework core include:
- improvements to printks on errors
- flattening the previously hierarchal structure of per-clock entries
in debugfs
- allow per-clock debugfs entries that are specific to a particular
clock driver
- configure initial clock parent and/or initial clock rate from
Device Tree
- several feature enhancements to the composite clock type
- misc fixes
New clock drivers added include:
- TI Palmas PMIC
- Allwinner A23 SoC
- Qualcomm APQ8084 and IPQ8064 SoCs
- Rockchip rk3188, rk3066 and rk3288 SoCs
- STMicroelectronics STiH407 SoC
- Cirrus Logic CLPS711X SoC
Many fixes, feature enhancements and further clock tree support for
existing clock drivers also were merged, such as Samsung's "ARMCLK
down" power saving feature for their Exynos4 & Exynos5 SoCs"
* tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
clk: Add missing of_clk_set_defaults export
clk: checking wrong variable in __set_clk_parents()
clk: Propagate any error return from debug_init()
clk: clps711x: Add DT bindings documentation
clk: Add CLPS711X clk driver
clk: st: Use round to closest divider flag
clk: st: Update frequency tables for fs660c32 and fs432c65
clk: st: STiH407: Support for clockgenA9
clk: st: STiH407: Support for clockgenD0/D2/D3
clk: st: STiH407: Support for clockgenC0
clk: st: Add quadfs reset handling
clk: st: Add polarity bit indication
clk: st: STiH407: Support for clockgenA0
clk: st: STiH407: Support for A9 MUX Clocks
clk: st: STiH407: Support for Flexgen Clocks
clk: st: Adds Flexgen clock binding
clk: st: Remove uncessary (void *) cast
clk: st: use static const for clkgen_pll_data tables
clk: st: use static const for stm_fs tables
clk: st: Update ST clock binding documentation
...
|
|
|
Mark Brown
|
8331c49c48 | Merge remote-tracking branches 'spi/fix/s3c64xx', 'spi/fix/samsung' and 'spi/fix/xilinx' into spi-linus | |
|
YoungJun Cho
|
5a8da52404 |
ARM: dts: exynos5420: add dsi node
This patch adds common part of dsi node. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> |
|
|
YoungJun Cho
|
dc9ec8cd28 |
ARM: dts: exynos5420: add mipi-phy node
This patch adds mipi-phy node for MIPI DSI device. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> |
|
|
YoungJun Cho
|
37e4a351f6 |
ARM: dts: exynos5: add system register property
This patch adds sysreg property to fimd device node which is required to use I80 interface. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> |
|
|
YoungJun Cho
|
2eb629417f |
ARM: dts: exynos4: add system register property
This patch adds sysreg property to fimd device node which is required to use I80 interface. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> |
|
|
Olof Johansson
|
8850e0ba57 |
Samsung DT 2nd updates for v3.17
This is based on tags/exynos-power because this DT changes are depending PMU cleanup. Fixes boot for exynos5260 and exynos5410, - Since exynos cannot boot without obtaining PMU address via DT from now on, add PMU node for exynos5260 and exynos5410 For preparing exynos5250-spring, - move max77686 and cypress,cyapa trackpad from exynos5250- cros-common to exynos5250-snow DT file (Note exynos5250-spring is not included in this branch yet) For exynos3250, - add TMU node and remove duplicated interrupt-parent - add missing pinctrl property for uart0 and uart1 For exynos5250-smdk5250 board - add max77686 pmic interrupt property which is connected to gpx3 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJT2of/AAoJEA0Cl+kVi2xqNtkP/RzgKbqZfBVFVj7j9gC/c8qs 0Cnh3l6JHXRQXMLvL7vI9MXS41kH0jaLWxSDgZlf87pARINT2zDP6KNAYleJJz3j +VX++YP6e4Yhw72Jzxuzqjjdu0IMNoo0JL7T5w/aHK5C186YKM7mEuG98+/qbwBh nF2pEPlQ9x3D78XawyC8IdGBkB6YlpqWWYThPDVGN2wvm14Jf9CRJFVyDjcjO281 y4K7cXnxKYzc51Oih5ktzT0K4oHaHag5biLLOwBCCQFJVr6ZWbXG/Nd849v8chG+ Cfg9ckkch+CGre8NsdW4qfu1UGIK3qubHw9fKZzm8j9/0PANgLMfrX4/JKFhPbsQ 2Hluc3u4UFkNheDJ4xfY127MQCvIlXwUZLAhDS3PGvm7nP/BiPjpX4HsLsBq11we wRCEtiD1aWb5XcVUyJQfUIETEfQDoc7bU9YjSEpz30ilTc/F5rLs2/zAgrz4/yLE rhFyGl4qWW8LbveD6X7QjZ2mLEG5kYOd0job2SfJeXN0uQDJV3JpZbhJ7pvHDQTk 3OiR7xtrpfOsMGjxW3kpCs/kz9h7MLwbIdlUa5cFl3kpTTLmexo+0TagzcGIus+z Yzt02gnM5zLUYmy0YjDI2YqvL17urTnLvrQnUeM/WlXOHPJkSnHvh9ywbsm9SrIe iGQG4cuxEtVk+s6ECVUf =aXEe -----END PGP SIGNATURE----- Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung DT 2nd updates for v3.17" from Kukjin Kim: This is based on tags/exynos-power because this DT changes are depending PMU cleanup. Fixes boot for exynos5260 and exynos5410, - Since exynos cannot boot without obtaining PMU address via DT from now on, add PMU node for exynos5260 and exynos5410 For preparing exynos5250-spring, - move max77686 and cypress,cyapa trackpad from exynos5250- cros-common to exynos5250-snow DT file (Note exynos5250-spring is not included in this branch yet) For exynos3250, - add TMU node and remove duplicated interrupt-parent - add missing pinctrl property for uart0 and uart1 For exynos5250-smdk5250 board - add max77686 pmic interrupt property which is connected to gpx3 * tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (28 commits) ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ARM: dts: Document exynos5410 PMU ARM: EXYNOS: Move cpufreq and cpuidle device registration to init_machine ARM: EXYNOS: Refactored code for using PMU address via DT ARM: EXYNOS: Support cluster power off on exynos5420/5800 ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm ARM: EXYNOS: do not allow cpuidle registration for exynos5420 cpuidle: big.LITTLE: init driver for exynos5420 cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config ARM: EXYNOS: add generic function to calculate cpu number cpuidle: big.LITTLE: add of_device_id structure ... Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Vince Bridgers
|
ea6856e352 |
ARM: socfpga: Add socfpga Ethernet filter attributes entries
This patch adds socfpga Ethernet filter attributes for multicast and unicast filters per Synopsys Ethernet IP configuration chosen by Altera for the Cyclone 5 and Arria SOC FPGAs. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
|
|
Mike Turquette
|
d7d3d26fa5 |
Samsung clock patches for 3.17
1) non-critical fixes (without need to push to stable): |
|
|
Olof Johansson
|
cdf26ad472 |
Watchdog nodes and a duplicate pinctrl property.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCAAGBQJT2dEIAAoJEPOmecmc0R2B8W0H/irwD4+yXxgaDzVFRrZ/txBZ 4BHh92O8Gw5CEhV785TA6rtlVpY/AkR+kKzlsCNJxg0e8b0WLSoebMqbWUGHeYyc 0BLv3BY4U/lLFGKYNqjYOGJS8OEbWrNBdHCn9KnfNrRliusrtWHXX2RhxsdtKeyd W4LPNwWzLZeX8jUfW4Qu1vsb6xSF/IpL/xlWf43W5HkVAmEEn6FvS5IvkEghcpL9 cudKDarhVFheiFz9GwIG9IAMJfaIvoi01UL2GmjC258KN/lKKCF/yNVkSJnsNSLc jIX7+LCvd0iQlODosX67SBw6UMk8J4ZxPV5Cx09pJCNzG/wyDrX22l/fexVZKfk= =XbY+ -----END PGP SIGNATURE----- Merge tag 'v3.17-rockchip-rk3xxx-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "two more dts changes for Rockchip Cortex-A9 SoCs" from Heiko Stübner: Watchdog nodes and a duplicate pinctrl property. * tag 'v3.17-rockchip-rk3xxx-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Haojian Zhuang
|
c2fff85e21 |
ARM: hisi: remove smp from machine descriptor
Use CPU_METHOD_OF_DECLARE() instead. And declare smp method in dts file. Changelog: v6: * Use hisilicon,hi3620-smp as enable-method property in Hi3620 dts. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Haifeng Yan
|
75a4795a1d |
ARM: dts: Add hix5hd2-dkb dts file.
Add dts file for Hisilicon x5hd2 development kit board. Signed-off-by: Haifeng Yan <yanhaifeng@gmail.com> Signed-off-by: Jiancheng Xue <jchxue@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> [olof: Rename dts/dtsi to include hisi prefix] Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Olof Johansson
|
68a05338ce |
Add support for rk3288 ehci controllers.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABCAAGBQJT2crRAAoJEPOmecmc0R2B8cAIAIke/dswgq4Kmk/G6spgdict UXusTcy3mgnzz9X93fl+naGOopCJBSZFkTJFvNNo9nw7V+Knt1R7OW5uXMuOnwZ2 MNMEp9bmZNNKrUNqtrvZeda+Y71TCY8OKLOAnnyfnCToVQ+OCYhW4qkq/G5B3KfI 8YXK8jjhVERUG94+N6AIOxNq0qlmyoc+ZCErjUu6y3BlP/Z7OCLkEhfMmHiwMT7m CwowMIjE0WhTt4GlVaFhHx5FvBMWI4cQWC61kCJash+U84UY1uGZ/ejPbOcIW0XP 76PCG4wt63sbpeUDjJR52e7HIzP/UGtVdVZACT82YJLpotqB3C5Mc7k/PQw46YM= =5B5W -----END PGP SIGNATURE----- Merge tag 'v3.17-rockchip-rk3288-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "Basic rk3288 usb support" from Heiko Stübner: Add support for rk3288 ehci controllers. * tag 'v3.17-rockchip-rk3288-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Doug Anderson
|
163cb917b8 |
ARM: dts: Enable USB host0 (EHCI) on rk3288-evb
This is the top USB port on the evb (the one closest to the Ethernet connector). Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> |