Commit Graph

107 Commits

Author SHA1 Message Date
Nicholas Bellinger 4b2f57e5ce target: Drop left-over PHBA_PDEV set attr checks
Now that PSCSI is only exposing four hw_* read-only device attributes,
go ahead and drop the left-over -> legacy PHBA_PDEV checks in various
se_dev_set_* code, since it's now only used by virtual devices.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-01 21:36:21 -08:00
Nicholas Bellinger d30cd1238c target: Add EXPORT_SYMBOL for existing se_dev_set_*
Now that target_core_backend_configfs.h macros will be using these
se_dev_set attribute functions externally to allow backend drivers
to populate different attributes, go ahead and add EXPORT_SYMBOL()
for the existing default set of 30 device attributes.

Also update target_core_backend.h with proper function prototypes.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-01 21:36:02 -08:00
Nicholas Bellinger 92404e609a target: Add force_pr_aptpl device attribute
This patch adds a force_pr_aptpl device attribute used to force SPC-3 PR
Activate Persistence across Target Power Loss (APTPL) operation.  This
makes PR metadata write-out occur during state change regardless if new
PERSISTENT_RESERVE_OUT CDBs have their APTPL feature bit set.

This is useful during H/A failover in active/passive setups where all PR
state is being re-created on a different node, driven by configfs backend
device + export layout and pre-loaded $DEV/pr/res_aptpl_metadata.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-04 05:41:20 +00:00
Nicholas Bellinger e24805637d target: Fix APTPL metadata handling for dynamic MappedLUNs
This patch fixes a bug in handling of SPC-3 PR Activate Persistence
across Target Power Loss (APTPL) logic where re-creation of state for
MappedLUNs from dynamically generated NodeACLs did not occur during
I_T Nexus establishment.

It adds the missing core_scsi3_check_aptpl_registration() call during
core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in
order to replay any pre-loaded APTPL metadata state associated with
the newly connected SCSI Initiator Port.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-04 05:40:19 +00:00
Joern Engel 33940d0993 target: encapsulate smp_mb__after_atomic()
The target code has a rather generous helping of smp_mb__after_atomic()
throughout the code base.  Most atomic operations were followed by one
and none were preceded by smp_mb__before_atomic(), nor accompanied by a
comment explaining the need for a barrier.

Instead of trying to prove for every case whether or not it is needed,
this patch introduces atomic_inc_mb() and atomic_dec_mb(), which
explicitly include the memory barriers before and after the atomic
operation.  For now they are defined in a target header, although they
could be of general use.

Most of the existing atomic/mb combinations were replaced by the new
helpers.  In a few cases the atomic was sandwiched in
spin_lock/spin_unlock and I simply removed the barrier.

I suspect that in most cases the correct conversion would have been to
drop the barrier.  I also suspect that a few cases exist where a) the
barrier was necessary and b) a second barrier before the atomic would
have been necessary and got added by this patch.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01 14:39:06 -07:00
Andy Grover cd9d7cbaec target: Change core_dev_del_lun to take a se_lun instead of unpacked_lun
Remove core_tpg_pre_dellun entirely, since we don't need to get/check
a pointer we already have.

Nothing else can return an error, so core_dev_del_lun can return void.

Rename core_tpg_post_dellun to remove_lun - a clearer name, now that
pre_dellun is gone.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01 14:38:48 -07:00
Nicholas Bellinger 83ff42fcce target: Fix left-over se_lun->lun_sep pointer OOPs
This patch fixes a left-over se_lun->lun_sep pointer OOPs when one
of the /sys/kernel/config/target/$FABRIC/$WWPN/$TPGT/lun/$LUN/alua*
attributes is accessed after the $DEVICE symlink has been removed.

To address this bug, go ahead and clear se_lun->lun_sep memory in
core_dev_unexport(), so that the existing checks for show/store
ALUA attributes in target_core_fabric_configfs.c work as expected.

Reported-by: Sebastian Herbszt <herbszt@gmx.de>
Tested-by: Sebastian Herbszt <herbszt@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-26 20:56:49 -07:00
Linus Torvalds 776edb5931 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...
2014-06-03 12:57:53 -07:00
Andy Grover 07b8dae38b target: Don't allow setting WC emulation if device doesn't support
Just like for pSCSI, if the transport sets get_write_cache, then it is
not valid to enable write cache emulation for it. Return an error.

see https://bugzilla.redhat.com/show_bug.cgi?id=1082675

Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-15 17:09:17 -07:00
Andy Grover 448ba90416 target: Allow non-supporting backends to set pi_prot_type to 0
Userspace tools assume if a value is read from configfs, it is valid
and will not cause an error if the same value is written back. The only
valid value for pi_prot_type for backends not supporting DIF is 0, so allow
this particular value to be set without returning an error.

Reported-by: Krzysztof Chojnowski <frirajder@gmail.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-15 17:08:51 -07:00
Peter Zijlstra 4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
Linus Torvalds 4e13c5d021 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

  - add support for SCSI Referrals (Hannes)
  - add support for T10 DIF into target core (nab + mkp)
  - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab)
  - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab)
  - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi)
  - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn)
  - allow percpu_ida_alloc() to receive task state bitmask (Kent)
  - fix >= v3.12 iscsi-target session reset hung task regression (nab)
  - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab)
  - fix a long-standing network portal creation race (Andy)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
  target: Fix percpu_ref_put race in transport_lun_remove_cmd
  target/iscsi: Fix network portal creation race
  target: Report bad sector in sense data for DIF errors
  iscsi-target: Convert gfp_t parameter to task state bitmask
  iscsi-target: Fix connection reset hang with percpu_ida_alloc
  percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask
  iscsi-target: Pre-allocate more tags to avoid ack starvation
  qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport
  qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO.
  qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
  IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine
  IB/isert: Move fastreg descriptor creation to a function
  IB/isert: Avoid frwr notation, user fastreg
  IB/isert: seperate connection protection domains and dma MRs
  tcm_loop: Enable DIF/DIX modes in SCSI host LLD
  target/rd: Add DIF protection into rd_execute_rw
  target/rd: Add support for protection SGL setup + release
  target/rd: Refactor rd_build_device_space + rd_release_device_space
  target/file: Add DIF protection support to fd_execute_rw
  target/file: Add DIF protection init/format support
  ...
2014-01-31 15:31:23 -08:00
Nicholas Bellinger 2ed22c9cbc target/configfs: Expose protection device attributes
This patch adds support for exposing DIF protection device
attributes via configfs.  This includes:

   pi_prot_type: Protection Type (0, 1, 3 currently support)
   pi_prot_format: Protection Format Operation (FILEIO only)

Within se_dev_set_pi_prot_type() it also adds the se_subsystem_api
device callbacks to setup per device protection information.

v2 changes:
  - Drop pi_guard_type + pi_prot_version related code (MKP)
  - Add pi_prot_format logic (Sagi)
  - Add ->free_prot callback in target_free_device
  - Add hw_pi_prot_type read-only attribute

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18 09:57:47 +00:00
Hannes Reinecke 229d4f112f target_core_alua: Referrals configfs integration
Referrals need an LBA map, which needs to be kept
consistent across all target port groups. So
instead of tying the map to the target port groups
I've implemented a single attribute containing the
entire map.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09 21:48:35 -08:00
Hannes Reinecke c66094bf32 target_core_alua: Referrals infrastructure
Add infrastructure for referrals.

v2 changes:

 - Fix unsigned long long division in core_alua_state_lba_dependent on
   32-bit  (Fengguang + Chen + Hannes)
 - Fix compile warning in core_alua_state_lba_dependent (nab)
 - Convert segment_* + sectors variables in core_alua_state_lba_dependent
   to u64 (Hannes)

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09 21:48:17 -08:00
Nicholas Bellinger 95cadace8f target/file: Update hw_max_sectors based on current block_size
This patch allows FILEIO to update hw_max_sectors based on the current
max_bytes_per_io.  This is required because vfs_[writev,readv]() can accept
a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really
needs to be calculated based on block_size.

This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M
sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for
the block_size=4096 case.

(v2: Use max_bytes_per_io instead of ->update_hw_max_sectors)

Reported-by: Henrik Goldman <hg@x-formation.com>
Cc: <stable@vger.kernel.org> #3.5+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-19 00:18:54 -08:00
Andy Grover d344f8a156 target: Rename core_tpg_{pre,post}_addlun for clarity
"pre" is really an allocation function. The only time it isn't called is
for virtual_lun0, which is statically allocated. Renaming that to "alloc"
lets the other function not need to be "post", and just be called
core_tpg_add_lun.

(nab: fix minor applying fuzz in core_tpg_setup_virtual_lun0)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-16 13:28:19 -08:00
Andy Grover 2af7973a37 target: Refer to u32 luns as unpacked_lun
It's clearer to refer to pointers to the struct se_lun as "lun" and the
actual number itself as "unpacked_lun".

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-16 13:24:38 -08:00
Hannes Reinecke 125d0119d1 target core: rename (ex,im)plict -> (ex,im)plicit
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20 11:24:40 -08:00
Nicholas Bellinger ee480683d9 target: Convert se_device statistics to atomic_long_t
This patch converts the handful of se_device statistics to type
atomic_long_t, instead of using se_device->stats_lock when
incrementing these values.

More importantly, go ahead and drop the spinlock usage within
transport_lookup_cmd_lun() fast-path code.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-13 18:34:55 -08:00
Nicholas Bellinger 4863e52565 target: Add per device xcopy_lun for copy offload I/O
This patch adds a se_device->xcopy_lun that is used for local
copy offload I/O, instead of allocating + initializing a pseudo
se_lun for each received EXTENDED_COPY operation.

Also, move declaration of struct se_lun + struct se_port_stat_grps
ahead of struct se_device.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-08 13:13:38 -08:00
Nicholas Bellinger 5277797dc4 target: Add percpu refcounting for se_lun access
This patch adds percpu refcounting for se_lun access that allows the
association of an se_lun + se_cmd in transport_lookup_cmd_lun() to
occur without an extra list_head for tracking outstanding I/O during
se_lun shutdown.

This effectively changes se_lun shutdown logic to wait for outstanding
I/O percpu references to complete in transport_lun_remove_cmd() using
se_lun->lun_ref_comp, instead of explicitly draining the per se_lun
command list and waiting for individual se_cmd descriptor processing
to complete.

Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-07 14:24:52 -08:00
Nicholas Bellinger 4c76251e8e target: Update copyright ownership/year information to 2013
Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10 20:23:36 -07:00
Nicholas Bellinger d397a445f4 target: Add Third Party Copy (3PC) bit in INQUIRY response
This patch adds the Third Party Copy (3PC) bit to signal support
for EXTENDED_COPY within standard inquiry response data.

Also add emulate_3pc device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Zach Brown <zab@redhat.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10 16:48:46 -07:00
Nicholas Bellinger d9ea32bff2 target: Add global device list for EXTENDED_COPY
EXTENDED_COPY needs to be able to search a global list of devices
based on NAA WWN device identifiers, so add a simple g_device_list
protected by g_device_mutex.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Zach Brown <zab@redhat.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10 16:48:40 -07:00
Nicholas Bellinger 68ff9b9b27 target: Add support for COMPARE_AND_WRITE emulation
This patch adds support for COMPARE_AND_WRITE emulation on a per block
basis.  This logic is used as an atomic test and set primative currently
used by VMWare ESX VAAI for performing array side locking of individual
VMFS extent ownership.

This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(),
and does the majority of the work within the compare_and_write_callback()
to perform the verify instance user data comparision, and subsequent
write instance user data I/O submission upon a successfull comparision.

The synchronization is enforced by se_device->caw_sem, that is obtained
before the initial READ I/O submission in sbc_compare_and_write().  The
mutex is then released upon MISCOMPARE in compare_and_write_callback(),
or upon WRITE instance user-data completion in compare_and_write_post().

The implementation currently assumes a single logical block (NoLB=1).

v4 changes:
 - Explicitly clear cmd->transport_complete_callback for two failure
   cases in sbc_compare_and_write() in order to avoid double unlock
   of ->caw_sem in compare_and_write_callback() (Dan Carpenter)

v3 changes:
 - Convert se_device->caw_mutex to ->caw_sem

v2 changes:
 - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to
   sbc_compare_and_write() during setup in sbc_parse_cdb()
 - Use sbc_compare_and_write() for initial READ submission with
   DMA_FROM_DEVICE
 - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance
   user-data in compare_and_write_callback()
 - Drop SCF_BIDI command flag usage
 - Set TRANSPORT_PROCESSING + transport_state flags before write
   instance submission, and convert to __target_execute_cmd()
 - Prevent sbc_get_size() from being being called twice to
   generate incorrect size in sbc_parse_cdb()
 - Enforce se_device->caw_mutex synchronization between initial
   READ I/O submission, and final WRITE I/O completion.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-10 16:41:59 -07:00
Nicholas Bellinger 0123a9ec6a target: Add MAXIMUM COMPARE AND WRITE LENGTH in Block Limits VPD
This patch adds the MAXIMUM COMPARE AND WRITE LENGTH bit, currently
hardcoded to a single logical block (NoLB=1) within the Block Limits
VPD in spc_emulate_evpd_b0().

Also add emulate_caw device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09 14:29:35 -07:00
Andy Grover db5d1c3ccc target: Make virtual_lun0 a nullio device
Nobody should be expecting to read or write virtual_lun0.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14 00:27:32 -07:00
Andy Grover 4e529be27d target: Remove t10_reservation.pr_aptpl_buf_len
It's only ever set to PR_APTPL_BUF_LEN, so we don't need a variable.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-14 00:04:46 -07:00
Andy Grover 2acd09f323 target: Remove unused struct members in se_dev_entry
Some were incremented, but never used anywhere from what I could tell.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-03 16:42:18 -07:00
Nicholas Bellinger fcf29481fb target: Fix lookup of dynamic NodeACLs during cached demo-mode operation
This patch fixes a bug in core_tpg_check_initiator_node_acl() ->
core_tpg_get_initiator_node_acl() where a dynamically created
se_node_acl generated during session login would be skipped during
subsequent lookup due to the '!acl->dynamic_node_acl' check, causing
a new se_node_acl to be created with a duplicate ->initiatorname.

This would occur when a fabric endpoint was configured with
TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1
preventing the release of an existing se_node_acl during se_session
shutdown.

Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl()
within core_dev_init_initiator_node_lun_acl() that originally
required the extra '!acl->dynamic_node_acl' check, and just pass
the configfs provided se_node_acl pointer instead.

Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-18 18:47:20 -08:00
Tregaron Bayly adfa9570a5 target: Add device attribute to expose config_item_name for INQUIRY model
This patch changes LIO to use the configfs backend device name as the
model if you echo '1' to an individual device's emulate_model_alias attribute.
This is a valid operation only on devices with an export count of 0.

Signed-off-by: Tregaron Bayly <tbayly@bluehost.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:27:58 -08:00
Nicholas Bellinger d0c8b259f8 target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
This patch allows IBLOCK to check block hints in request_queue->flush_flags
when reporting current backend device WriteCacheEnabled status to a remote
SCSI initiator port.

This is done via a se_subsystem_api->get_write_cache() call instead of a
backend se_device creation time flag, as we expect REQ_FLUSH bits to possibly
change from an underlying blk_queue_flush() by the SCSI disk driver, or
internal raw struct block_device driver usage.

Also go ahead and update iblock_execute_rw() bio I/O path code to use
REQ_FLUSH + REQ_FUA hints when determining WRITE_FUA usage, and make SPC
emulation code use a spc_check_dev_wce() helper to handle both types of
cases for virtual backend subsystem drivers.

(asias: Drop unnecessary comparsion operators)

Reported-by: majianpeng <majianpeng@gmail.com>
Cc: majianpeng <majianpeng@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13 11:27:51 -08:00
Nicholas Bellinger 7a3cf6ca1a target: Fix divide by zero bug in fabric_max_sectors for unconfigured devices
This patch fixes a possible divide by zero bug when the fabric_max_sectors
device attribute is written and backend se_device failed to be successfully
configured -> enabled.

Go ahead and use block_size=512 within se_dev_set_fabric_max_sectors()
in the event of a target_configure_device() failure case, as no valid
dev->dev_attrib.block_size value will have been setup yet.

Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-31 15:22:53 -08:00
Nicholas Bellinger 0ff8754981 target: Add link_magic for fabric allow_link destination target_items
This patch adds [dev,lun]_link_magic value assignment + checks within generic
target_fabric_port_link() and target_fabric_mappedlun_link() code to ensure
destination config_item *target_item sent from configfs_symlink() ->
config_item_operations->allow_link() is the underlying se_device->dev_group
and se_lun->lun_group that we expect to symlink.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-05 00:11:36 -08:00
Nicholas Bellinger fd9a11d707 target: Update copyright information to 2012
v2: Use correct target_core_stat.c 2006 copyright year
v3: Drop extra unnessary legal verbage from header (hch)

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-27 22:47:02 -08:00
Nicholas Bellinger 773cbaf746 target: Add/check max_write_same_len device attribute + update block limits VPD
This patch adds a new max_write_same_len device attribute for use with
WRITE_SAME w/ UNMAP=0 backend emulation.  This can be useful for
lowering the default backend value (IBLOCK uses 0xFFFF).

Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to
report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during
sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated
WRITE_SAME w/ UNMAP=0 cases.

(Robert: Move max_write_same_len check in sbc_setup_write_same() to
         check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15 12:27:21 -08:00
Christoph Hellwig de103c93af target: pass sense_reason as a return value
Pass the sense reason as an explicit return value from the I/O submission
path instead of storing it in struct se_cmd and using negative return
values.  This cleans up a lot of the code pathes, and with the sparse
annotations for the new sense_reason_t type allows for much better
error checking.

(nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use
      sense_reason_t with Roland's MODE SELECT changes)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:46 -08:00
Christoph Hellwig 48c2567d1a target: remove ->get_device_rev
Now that the reservations and ALUA code have been cleaned up there is no need
for the get_device_rev method, as we only need the standards revision in the
inquiry data, where we can hardcode it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:45 -08:00
Christoph Hellwig c87fbd5656 target: simplify alua support
We always support ALUA for virtual backends, and never for physical ones.  Simplify
the code to just deal with these two cases and remove the superflous abstractions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:45 -08:00
Christoph Hellwig d977f4377f target: simplify reservations code
We do not support host-level reservations for the pscsi backend, and all
virtual backends are newere than SCSI-2, so just make the combined
SPC-3 + SCSI-2 support the only supported variant and kill the switches
for the different implementations, given that this code handles the no-op
version just fine.

(hch: Update DRF_SPC2_RESERVATIONS lock usage)

Signed-off-by: Christoph Hellwig <hch@lst.de>
2012-11-06 20:55:45 -08:00
Christoph Hellwig 019c4ca621 target: kill dev->dev_task_attr_type
We can just key off ordered tag emulation of the transport_type field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:45 -08:00
Christoph Hellwig d1b1f80534 target: move REPORT LUNS emulation to target_core_spc.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:44 -08:00
Christoph Hellwig 0fd97ccf45 target: kill struct se_subsystem_dev
Simplify the code a lot by killing the superflous struct se_subsystem_dev.
Instead se_device is allocated early on by the backend driver, which allocates
it as part of its own per-device structure, borrowing the scheme that is for
example used for inode allocation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06 20:55:43 -08:00
Roland Dreier 3e03989b58 target: Avoid integer overflow in se_dev_align_max_sectors()
The expression (max_sectors * block_size) might overflow a u32
(indeed, since iblock sets max_hw_sectors to UINT_MAX, it is
guaranteed to overflow and end up with a much-too-small result in many
common cases).  Fix this by doing an equivalent calculation that
doesn't require multiplication.

While we're touching this code, avoid splitting a printk format across
two lines and use pr_info(...) instead of printk(KERN_INFO ...).

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-01 00:38:44 -07:00
Nicholas Bellinger fd30e93102 target: Drop se_subsystem_api->[write_cache,fua_write]_emulated flags
This patch drops se_subsystem_api->[write_cache,fua_write]_emulated flags
set by viritual FILEIO/IBLOCK/RD_MCP backend drivers in favor of explict
TRANSPORT_PLUGIN_PHBA_PDEV checks to know when to fail if userspace is
attempting to set virtual emulation bits for an pSCSI (passthrough)
backend device.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17 17:13:34 -07:00
Masanari Iida 35d1efe805 target: Fix minor spelling typos in drivers/target
Correct spelling typo in printk and comment within drivers/target.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17 17:13:31 -07:00
Paolo Bonzini 9b16b9edb4 target: fail REPORT LUNS with less than 16 bytes of payload
SPC says:

"The ALLOCATION LENGTH field is defined in 4.3.5.6. The allocation length
should be at least 16.  Device servers compliant with SPC return CHECK
CONDITION status, with the sense key set to ILLEGAL REQUEST, and the
additional sense code set to INVALID FIELD IN CDB when the allocation
length is less than 16 bytes".

Testcase: sg_raw -r8 /dev/sdb a0 00 00 00 00 00 00 00 00 08 00 00
    should fail with ILLEGAL REQUEST / INVALID FIELD IN CDB sense
    does not fail without the patch
    fails correctly with the patch

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07 11:09:14 -07:00
Roland Dreier c8045372dd target: Make unnecessarily global se_dev_align_max_sectors() static
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:35 -07:00
Nicholas Bellinger 77d4c74506 target: Make core_disable_device_list_for_node use pre-refactoring lock ordering
So after kicking around commit 547ac4c9c90 around a bit more, a tcm_qla2xxx LUN
unlink OP has generated the following warning:

[   50.386625] qla2xxx [0000:07:00.0]-00af:0: Performing ISP error recovery - ha=ffff880263774000.
[   70.572988] qla2xxx [0000:07:00.0]-8038:0: Cable is unplugged...
[  126.527531] ------------[ cut here ]------------
[  126.532677] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x41/0x8c()
[  126.540433] Hardware name: S5520HC
[  126.544248] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath scsi_dh loop i2c_i801 kvm_intel kvm crc32c_intel i2c_core microcode joydev button iomemory_vsl(O) pcspkr ext3 jbd uhci_hcd lpfc ata_piix libata ehci_hcd qla2xxx mlx4_core scsi_transport_fc scsi_tgt igb [last unloaded: scsi_wait_scan]
[  126.595567] Pid: 3283, comm: unlink Tainted: G           O 3.5.0-rc2+ #33
[  126.603128] Call Trace:
[  126.605853]  [<ffffffff81026b91>] ? warn_slowpath_common+0x78/0x8c
[  126.612737]  [<ffffffff8102c342>] ? local_bh_enable_ip+0x41/0x8c
[  126.619433]  [<ffffffffa03582a2>] ? core_disable_device_list_for_node+0x70/0xe3 [target_core_mod]
[  126.629323]  [<ffffffffa035849f>] ? core_clear_lun_from_tpg+0x88/0xeb [target_core_mod]
[  126.638244]  [<ffffffffa0362ec1>] ? core_tpg_post_dellun+0x17/0x48 [target_core_mod]
[  126.646873]  [<ffffffffa03575ee>] ? core_dev_del_lun+0x26/0x8c [target_core_mod]
[  126.655114]  [<ffffffff810bcbd1>] ? dput+0x27/0x154
[  126.660549]  [<ffffffffa0359aa0>] ? target_fabric_port_unlink+0x3b/0x41 [target_core_mod]
[  126.669661]  [<ffffffffa034a698>] ? configfs_unlink+0xfc/0x14a [configfs]
[  126.677224]  [<ffffffff810b5979>] ? vfs_unlink+0x58/0xb7
[  126.683141]  [<ffffffff810b6ef3>] ? do_unlinkat+0xbb/0x142
[  126.689253]  [<ffffffff81330c75>] ? page_fault+0x25/0x30
[  126.695170]  [<ffffffff81335df9>] ? system_call_fastpath+0x16/0x1b
[  126.702053] ---[ end trace 2f8e5b0a9ec797ef ]---
[  126.756336] qla2xxx [0000:07:00.0]-00af:0: Performing ISP error recovery - ha=ffff880263774000.
[  146.942414] qla2xxx [0000:07:00.0]-8038:0: Cable is unplugged...

So this warning triggered because device_list disable logic is now
holding nacl->device_list_lock w/ spin_lock_irqsave before obtaining
port->sep_alua_lock with only spin_lock_bh..

The original disable logic obtains *deve ahead of dropping the entry
from deve->alua_port_list and then obtains ->device_list_lock to do the
remaining work.  Also, I'm pretty sure this particular warning is being
generated by a demo-mode session in tcm_qla2xxx, and not by explicit
NodeACL MappedLUNs.  The Initiator MappedLUNs are already protected by a
seperate configfs symlink reference back se_lun->lun_group, and the
demo-mode se_node_acl (and associated ->device_list[]) is released
during se_portal_group->tpg_group shutdown.

The following patch drops the extra functional change to disable logic
in commit 547ac4c9c90

Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16 17:35:24 -07:00