mirror of https://gitee.com/openkylin/linux.git
12163 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Suzuki K Poulose
|
6fc5baf547 |
perf cs-etm: Fix bitmap for option
When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly takes these two values (14 and 28 prespectively) as bit masks, but actually both are the offset for bits. But this doesn't lead to further failure due to the AND logic operation will be always true for ETM_OPT_CTXTID / ETM_OPT_TS. This patch defines new independent macros (rather than using the "config" bits) for requesting the "contextid" and "timestamp" for cs_etm_set_option(). Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Cc: Al Grant <al.grant@arm.com> Cc: Daniel Kiss <daniel.kiss@arm.com> Cc: Denis Nikitin <denik@chromium.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-doc@vger.kernel.org Link: http://lore.kernel.org/lkml/20210206150833.42120-5-leo.yan@linaro.org [ Extract the change as a separate patch for easier review ] Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Michael Petlan
|
86a19008af |
perf trace: Fix race in signal handling
Since a lot of stuff happens before the SIGINT signal handler is registered
(scanning /proc/*, etc.), on bigger systems, such as Cavium Sabre CN99xx,
it may happen that first interrupt signal is lost and perf isn't correctly
terminated.
The reproduction code might look like the following:
perf trace -a &
PERF_PID=$!
sleep 4
kill -INT $PERF_PID
The issue has been found on a CN99xx machine with RHEL-8 and the patch fixes
it by registering the signal handlers earlier in the init stage.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/YEJnaMzH2ctp3PPx@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Arnaldo Carvalho de Melo
|
77d02bd00c |
perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
Noticed on a debian:experimental mips and mipsel cross build build
environment:
perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1
mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
perfbuilder@ec265a086e9b:~$
CC /tmp/build/perf/util/map.o
util/map.c: In function 'map__new':
util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
109 | "%s/platforms/%s/arch-%s/usr/lib/%s",
| ^~
In file included from /usr/mips-linux-gnu/include/stdio.h:867,
from util/symbol.h:11,
from util/map.c:2:
/usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Since we have the lenghts for what lands in that place, use it to give
the compiler more info and make it happy.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Ravi Bangoria
|
6740a4e70e |
perf report: Fix -F for branch & mem modes
perf report fails to add valid additional fields with -F when
used with branch or mem modes. Fix it.
Before patch:
$ perf record -b
$ perf report -b -F +srcline_from --stdio
Error:
Invalid --fields key: `srcline_from'
After patch:
$ perf report -b -F +srcline_from --stdio
# Samples: 8K of event 'cycles'
# Event count (approx.): 8784
...
Committer notes:
There was an inversion: when looking at branch stack dimensions (keys)
it was checking if the sort mode was 'mem', not 'branch'.
Fixes:
|
|
|
Arnaldo Carvalho de Melo
|
c1f272df51 |
perf tests x86: Move insn.h include to make sure it finds stddef.h
In some versions of alpine Linux the perf build is broken since commit
|
|
|
Kan Liang
|
7d9d4c6edb |
perf test: Support the ins_lat check in the X86 specific test
The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction latency, which is only available for X86. Add a X86 specific test for the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT type. The test__x86_sample_parsing() uses the same way as the test__sample_parsing() to verify a sample type. Since the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT are the only X86 specific sample type for now, the test__x86_sample_parsing() only verify the PERF_SAMPLE_WEIGHT_STRUCT type. Other sample types are still verified in the generic test. $ perf test 77 -v 77: x86 Sample parsing : --- start --- test child forked, pid 102370 test child finished with 0 ---- end ---- x86 Sample parsing: Ok Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/1614787285-104151-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Kan Liang
|
a8146d66ab |
perf test: Fix sample-parsing failure on non-x86 platforms
Executing 'perf test 27' fails on s390: [root@t35lp46 perf]# ./perf test -Fv 27 27: Sample parsing --- start --- ---- end ---- Sample parsing: FAILED! [root@t35lp46 perf]# The commit |
|
|
Nicholas Fraser
|
ec4d0a7680 |
perf archive: Fix filtering of empty build-ids
A non-existent build-id used to be treated as all-zero SHA-1 hash. Build-ids are now variable width. A non-existent build-id is an empty string and "perf buildid-list" pads this with spaces. This is true even when using old perf.data files recorded from older versions of perf; "perf buildid-list" never reports an all-zero hash anymore. This fixes "perf-archive" to skip missing build-ids by skipping lines that start with a padding space rather than with zeroes. Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Huw Davies <huw@codeweavers.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: https://lore.kernel.org/r/442bffc7-ac5c-0975-b876-a549efce2413@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Namhyung Kim
|
bd57a9f33a |
perf daemon: Fix compile error with Asan
I'm seeing a build failure when build with address sanitizer. It seems
we could write to the name[100] if the var is longer.
$ make EXTRA_CFLAGS=-fsanitize=address
...
CC builtin-daemon.o
In function ‘get_session_name’,
inlined from ‘session_config’ at builtin-daemon.c:164:6,
inlined from ‘server_config’ at builtin-daemon.c:223:10:
builtin-daemon.c:155:11: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
155 | *session = 0;
| ~~~~~~~~~^~~
builtin-daemon.c: In function ‘server_config’:
builtin-daemon.c:162:7: note: at offset 100 to object ‘name’ with size 100 declared here
162 | char name[100];
| ^~~~
Fixes:
|
|
|
Namhyung Kim
|
513068f2b1 |
perf stat: Fix use-after-free when -r option is used
I got a segfault when using -r option with event groups. The option
makes it run the workload multiple times and it will reuse the evlist
and evsel for each run.
While most of resources are allocated and freed properly, the id hash
in the evlist was not and it resulted in the bug. You can see it with
the address sanitizer like below:
$ perf stat -r 100 -e '{cycles,instructions}' true
=================================================================
==693052==ERROR: AddressSanitizer: heap-use-after-free on
address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8
WRITE of size 8 at 0x6080000003d0 thread T0
#0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644
#1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237
#2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244
#3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285
#4 0x558c5747733e in store_evsel_ids util/evsel.c:2765
#5 0x558c5747733e in evsel__store_ids util/evsel.c:2782
#6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895
#7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014
#8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446
#9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308
#14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9)
Actually the nodes in the hash table are struct perf_stream_id and
they were freed in the previous run. Fix it by resetting the hash.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Jin Yao
|
034f7ee130 |
perf stat: Fix wrong skipping for per-die aggregation
Uncore becomes die-scope on Xeon Cascade Lake-AP and perf has supported
--per-die aggregation yet.
One issue is found in check_per_pkg() for uncore events running on AP
system. On cascade Lake-AP, we have:
S0-D0
S0-D1
S1-D0
S1-D1
But in check_per_pkg(), S0-D1 and S1-D1 are skipped because the mask
bits for S0 and S1 have been set for S0-D0 and S1-D0. It doesn't check
die_id. So the counting for S0-D1 and S1-D1 are set to zero. That's not
correct.
root@lkp-csl-2ap4 ~# ./perf stat -a -I 1000 -e llc_misses.mem_read --per-die -- sleep 5
1.001460963 S0-D0 1 1317376 Bytes llc_misses.mem_read
1.001460963 S0-D1 1 998016 Bytes llc_misses.mem_read
1.001460963 S1-D0 1 970496 Bytes llc_misses.mem_read
1.001460963 S1-D1 1 1291264 Bytes llc_misses.mem_read
2.003488021 S0-D0 1 1082048 Bytes llc_misses.mem_read
2.003488021 S0-D1 1 1919040 Bytes llc_misses.mem_read
2.003488021 S1-D0 1 890752 Bytes llc_misses.mem_read
2.003488021 S1-D1 1 2380800 Bytes llc_misses.mem_read
3.005613270 S0-D0 1 1126080 Bytes llc_misses.mem_read
3.005613270 S0-D1 1 2898176 Bytes llc_misses.mem_read
3.005613270 S1-D0 1 870912 Bytes llc_misses.mem_read
3.005613270 S1-D1 1 3388608 Bytes llc_misses.mem_read
4.007627598 S0-D0 1 1124608 Bytes llc_misses.mem_read
4.007627598 S0-D1 1 3884416 Bytes llc_misses.mem_read
4.007627598 S1-D0 1 921088 Bytes llc_misses.mem_read
4.007627598 S1-D1 1
|
|
|
Arnaldo Carvalho de Melo
|
743108e104 |
tools headers: Update syscall.tbl files to support mount_setattr
To pick the changes from:
|
|
|
Namhyung Kim
|
846580c235 |
perf test: Fix cpu and thread map leaks in perf_time_to_tsc test
It should release the maps at the end.
$ perf test -v 71
71: Convert perf time to TSC :
--- start ---
test child forked, pid 178744
mmap size 528384B
1st event perf time 59207256505278 tsc 13187166645142
rdtsc time 59207256542151 tsc 13187166723020
2nd event perf time 59207256543749 tsc 13187166726393
=================================================================
==178744==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73
#6 0x55b6209828fb in run_test tests/builtin-test.c:428
#7 0x55b6209828fb in test_and_print tests/builtin-test.c:458
#8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679
#9 0x55b620984a53 in cmd_test tests/builtin-test.c:825
#10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Convert perf time to TSC: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
690d91f5ec |
perf test: Fix cpu map leaks in cpu_map_print test
It should be released after printing the map.
$ perf test -v 52
52: Print cpu map :
--- start ---
test child forked, pid 172233
=================================================================
==172233==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 156 byte(s) in 1 object(s) allocated from:
#0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
#3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102
#4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120
#5 0x55e63afff8fb in run_test tests/builtin-test.c:428
#6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458
#7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679
#8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825
#9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s).
test child finished with 1
---- end ----
Print cpu map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
641b625033 |
perf test: Fix a memory leak in thread_map_remove test
The str should be freed after creating a thread map. Also change the
open-coded thread map deletion to a call to perf_thread_map__put().
$ perf test -v 44
44: Remove thread map :
--- start ---
test child forked, pid 165536
2 threads: 165535, 165536
1 thread: 165536
0 thread:
=================================================================
==165536==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 14 byte(s) in 1 object(s) allocated from:
#0 0x7f54453ffe8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x7f5444f8c6a7 in __vasprintf_internal libio/vasprintf.c:71
SUMMARY: AddressSanitizer: 14 byte(s) leaked in 1 allocation(s).
test child finished with 1
---- end ----
Remove thread map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
4be42882e1 |
perf test: Fix a thread map leak in thread_map_synthesize test
It missed to call perf_thread_map__put() after using the map.
$ perf test -v 43
43: Synthesize thread map :
--- start ---
test child forked, pid 162640
=================================================================
==162640==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46
#3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97
#4 0x563e6d27d8fb in run_test tests/builtin-test.c:428
#5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458
#6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679
#7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825
#8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Synthesize thread map: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
953e7b5960 |
perf test: Fix cpu and thread map leaks in switch_tracking test
The evlist and cpu/thread maps should be released together.
Otherwise the following error was reported by Asan.
$ perf test -v 35
35: Track with sched_switch :
--- start ---
test child forked, pid 159287
Using CPUID GenuineIntel-6-8E-C
mmap size 528384B
1295 events recorded
=================================================================
==159287==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350
#6 0x5652f56e18fb in run_test tests/builtin-test.c:428
#7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458
#8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679
#9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825
#10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Track with sched_switch: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
f2c3202ba0 |
perf test: Fix cpu and thread map leaks in keep_tracking test
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
$ perf test -v 28
28: Use a dummy software event to keep tracking:
--- start ---
test child forked, pid 156810
mmap size 528384B
=================================================================
==156810==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84
#6 0x55cc625e38fb in run_test tests/builtin-test.c:428
#7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458
#8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679
#9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825
#10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Use a dummy software event to keep tracking: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
e06c3ca492 |
perf test: Fix cpu and thread map leaks in code_reading test
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.
Note that this test still has memory leaks in DSOs so it still fails
even after this change. I'll take a look at that too.
# perf test -v 26
26: Object code reading :
--- start ---
test child forked, pid 154184
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
symsrc__init: cannot get elf header.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
Parsing event 'cycles'
mmap size 528384B
...
=================================================================
==154184==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55ad9b7e821e in dso__new_id util/dso.c:1256
#2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132
#3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347
#4 0x55ad9b845b7e in map__new util/map.c:176
#5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787
#6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64
#7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499
#8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741
#9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833
#10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608
#11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722
#12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428
#13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458
#14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679
#15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825
#16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308
...
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
test child finished with 1
---- end ----
Object code reading: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
97ab7c524f |
perf test: Fix cpu and thread map leaks in sw_clock_freq test
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
Also change the goto label since it doesn't need to have two.
# perf test -v 25
25: Software clock events period values :
--- start ---
test child forked, pid 149154
mmap size 528384B
mmap size 528384B
=================================================================
==149154==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63
#3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65
#4 0x56260d26d8fb in run_test tests/builtin-test.c:428
#5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458
#6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679
#7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825
#8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Software clock events period values : FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
83d25ccde5 |
perf test: Fix cpu and thread map leaks in task_exit test
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
Also change the goto label since it doesn't need to have two.
# perf test -v 24
24: Number of exit events of a simple workload :
--- start ---
test child forked, pid 145915
mmap size 528384B
=================================================================
==145915==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
#2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63
#3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74
#4 0x561cf4d798fb in run_test tests/builtin-test.c:428
#5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458
#6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679
#7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825
#8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Number of exit events of a simple workload: FAILED!
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
09a61c8f86 |
perf test: Fix a memory leak in attr test
The get_argv_exec_path() returns a dynamic memory so it should be
freed after use.
$ perf test -v 17
...
==141682==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 33 byte(s) in 1 object(s) allocated from:
#0 0x7f09107d2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x7f091035f6a7 in __vasprintf_internal libio/vasprintf.c:71
SUMMARY: AddressSanitizer: 33 byte(s) leaked in 1 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Namhyung Kim
|
b0faef924d |
perf test: Fix cpu and thread map leaks in basic mmap test
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL. Otherwise following error was reported by Asan.
# perf test -v 4
4: Read samples using the mmap interface :
--- start ---
test child forked, pid 139782
mmap size 528384B
=================================================================
==139782==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
#2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
#3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
#4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
#5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55
#6 0x564ba1e278fb in run_test tests/builtin-test.c:428
#7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458
#8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679
#9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825
#10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308
...
test child finished with 1
---- end ----
Read samples using the mmap interface: FAILED!
failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Jiri Olsa
|
84ea603650 |
perf tools: Fix event's PMU name parsing
Jin Yao reported parser error for software event:
# perf stat -e software/r1a/ -a -- sleep 1
event syntax error: 'software/r1a/'
\___ parser error
This happens after commit
|
|
|
Jiri Olsa
|
36bc511f63 |
perf daemon: Fix running test for non root user
John reported that the daemon test is not working for non root user.
Changing the tests configurations so it's allowed to run under normal
user.
Fixes:
|
|
|
Jiri Olsa
|
31bf4e7cb6 |
perf daemon: Fix control fifo permissions
Add proper mode for mkfifo calls to get read and write permissions for
user. We can't use O_RDWR in here, changing to standard permission
value.
Fixes:
|
|
|
Antonio Terceiro
|
dacfc08dca |
perf build: Fix ccache usage in $(CC) when generating arch errno table
This was introduced by commit |
|
|
Ian Rogers
|
b55ff1d145 |
perf tools: Fix documentation of verbose options
Option doesn't take a value, make sure the man pages agree. For example: $ perf evlist --verbose=1 Error: option `verbose' takes no value Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210226183145.1878782-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Ian Rogers
|
137a525893 |
perf traceevent: Ensure read cmdlines are null terminated.
Issue detected by address sanitizer.
Fixes:
|
|
|
Athira Rajeev
|
394e4306b0 |
perf bench numa: Fix the condition checks for max number of NUMA nodes
In systems having higher node numbers available like node 255, perf numa bench will fail with SIGABORT. <<>> perf: bench/numa.c:1416: init: Assertion `!(g->p.nr_nodes > 64 || g->p.nr_nodes < 0)' failed. Aborted (core dumped) <<>> Snippet from 'numactl -H' below on a powerpc system where the highest node number available is 255: available: 6 nodes (0,8,252-255) node 0 cpus: <cpu-list> node 0 size: 519587 MB node 0 free: 516659 MB node 8 cpus: <cpu-list> node 8 size: 523607 MB node 8 free: 486757 MB node 252 cpus: node 252 size: 0 MB node 252 free: 0 MB node 253 cpus: node 253 size: 0 MB node 253 free: 0 MB node 254 cpus: node 254 size: 0 MB node 254 free: 0 MB node 255 cpus: node 255 size: 0 MB node 255 free: 0 MB node distances: node 0 8 252 253 254 255 Note: <cpu-list> expands to actual cpu list in the original output. These nodes 252-255 are to represent the memory on GPUs and are valid nodes. The perf numa bench init code has a condition check to see if the number of NUMA nodes (nr_nodes) exceeds MAX_NR_NODES. The value of MAX_NR_NODES defined in perf code is 64. And the 'nr_nodes' is the value from numa_max_node() which represents the highest node number available in the system. In some systems where we could have NUMA node 255, this condition check fails and results in SIGABORT. The numa benchmark uses static value of MAX_NR_NODES in the code to represent size of two NUMA node arrays and node bitmask used for setting memory policy. Patch adds a fix to dynamically allocate size for the two arrays and bitmask value based on the node numbers available in the system. With the fix, perf numa benchmark will work with node configuration on any system and thus removes the static MAX_NR_NODES value. Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/1614271802-1503-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Dmitry Safonov
|
ffc52b7ae5 |
perf diff: Don't crash on freeing errno-session on the error path
__cmd_diff() sets result of perf_session__new() to d->session.
In case of failure, it's errno and perf-diff may crash with:
failed to open perf.data: Permission denied
Failed to open perf.data
Segmentation fault (core dumped)
From the coredump:
0 0x00005569a62b5955 in auxtrace__free (session=0xffffffffffffffff)
at util/auxtrace.c:2681
1 0x00005569a626b37d in perf_session__delete (session=0xffffffffffffffff)
at util/session.c:295
2 perf_session__delete (session=0xffffffffffffffff) at util/session.c:291
3 0x00005569a618008a in __cmd_diff () at builtin-diff.c:1239
4 cmd_diff (argc=<optimized out>, argv=<optimized out>) at builtin-diff.c:2011
[..]
Funny enough, it won't always crash. For me it crashes only if failed
file is second in cmd-line: the reason is that cmd_diff() check files for
branch-stacks [in check_file_brstack()] and if the first file doesn't
have brstacks, it doesn't proceed to try open other files from cmd-line.
Check d->session before calling perf_session__delete().
Another solution would be assigning to temporary variable, checking it,
but I find it easier to follow with IS_ERR() check in the same function.
After some time it's still obvious why the check is needed, and with
temp variable it's possible to make the same mistake.
Committer testing:
$ perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf diff
failed to open perf.data.old: No such file or directory
Failed to open perf.data.old
$ perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf diff
# Event 'cycles:u'
#
# Baseline Delta Abs Shared Object Symbol
# ........ ......... ................ ..........................
#
0.92% +87.66% [unknown] [k] 0xffffffff8825de16
11.39% +0.04% ld-2.32.so [.] __GI___tunables_init
87.70% ld-2.32.so [.] _dl_check_map_versions
$ sudo chown root:root perf.data
[sudo] password for acme:
$ perf diff
failed to open perf.data: Permission denied
Failed to open perf.data
Segmentation fault (core dumped)
$
After the patch:
$ perf diff
failed to open perf.data: Permission denied
Failed to open perf.data
$
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dmitry safonov <dima@arista.com>
Link: http://lore.kernel.org/lkml/20210302023533.1572231-1-dima@arista.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Andreas Wendleder
|
2b1919ec83 |
perf tools: Clean 'generated' directory used for creating the syscall table on x86
Remove generated directory tools/perf/arch/x86/include/generated. Signed-off-by: Andreas Wendleder <andreas.wendleder@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210301185642.163396-1-gonsolo@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Jiri Olsa
|
762323eb39 |
perf build: Move feature cleanup under tools/build
Arnaldo reported issue for following build command:
$ rm -rf /tmp/krava; mkdir /tmp/krava; make O=/tmp/krava clean
CLEAN config
/bin/sh: line 0: cd: /tmp/krava/feature/: No such file or directory
../../scripts/Makefile.include:17: *** output directory "/tmp/krava/feature/" does not exist. Stop.
make[1]: *** [Makefile.perf:1010: config-clean] Error 2
make: *** [Makefile:90: clean] Error 2
The problem is that now that we include scripts/Makefile.include
in feature's Makefile (which is fine and needed), we need to ensure
the OUTPUT directory exists, before executing (out of tree) clean
command.
Removing the feature's cleanup from perf Makefile and fixing
feature's cleanup under build Makefile, so it now checks that
there's existing OUTPUT directory before calling the clean.
Fixes:
|
|
|
Pierre Gondois
|
ded2e511a8 |
perf tools: Cast (struct timeval).tv_sec when printing
The musl-libc [1] defines (struct timeval).tv_sec as a 'long long' for arm and other architectures. The default build having a '-Wformat' flag, not casting the field when printing prevents from building perf. This patch casts the (struct timeval).tv_sec fields to the expected format. [1] git://git.musl-libc.org/musl Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Douglas.raillard@arm.com Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210224182410.5366-1-Pierre.Gondois@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Arnaldo Carvalho de Melo
|
add76c0113 |
perf arch powerpc: Sync powerpc syscall.tbl with the kernel sources
To get the changes in:
|
|
|
Linus Torvalds
|
3a36281a17 |
New features:
- Support instruction latency in 'perf report', with both memory latency
(weight) and instruction latency information, users can locate expensive load
instructions and understand time spent in different stages.
- Extend 'perf c2c' to display the number of loads which were blocked by data
or address conflict.
- Add 'perf stat' support for L2 topdown events in systems such as Intel's
Sapphire rapids server.
- Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a sort key, for instance:
perf report --stdio --sort=comm,symbol,code_page_size
- New 'perf daemon' command to run long running sessions while providing a way to control
the enablement of events without restarting a traditional 'perf record' session.
- Enable counting events for BPF programs in 'perf stat' just like for other
targets (tid, cgroup, cpu, etc), e.g.:
# perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
^C#
The example above counts 'cycles' and 'ref-cycles' of BPF program of id 254.
It is similar to bpftool-prog-profile command, but more flexible.
- Support the new layout for PERF_RECORD_MMAP2 to carry the DSO build-id using infrastructure
generalised from the eBPF subsystem, removing the need for traversing the perf.data file
to collect build-ids at the end of 'perf record' sessions and helping with long running
sessions where binaries can get replaced in updates, leading to possible mis-resolution
of symbols.
- Support filtering by hex address in 'perf script'.
- Support DSO filter in 'perf script', like in other perf tools.
- Add namespaces support to 'perf inject'
- Add support for SDT (Dtrace Style Markers) events on ARM64.
perf record:
- Fix handling of eventfd() when draining a buffer in 'perf record'.
- Improvements to the generation of metadata events for pre-existing threads (mmaps, comm, etc),
speeding up the work done at the start of system wide or per CPU 'perf record' sessions.
Hardware tracing:
- Initial support for tracing KVM with Intel PT.
- Intel PT fixes for IPC
- Support Intel PT PSB (synchronization packets) events.
- Automatically group aux-output events to overcome --filter syntax.
- Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.
- Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.
perf annotate TUI:
- Fix handling of 'k' ("show line number") hotkey
- Fix jump parsing for C++ code.
perf probe:
- Add protection to avoid endless loop.
cgroups:
- Avoid reading cgroup mountpoint multiple times, caching it.
- Fix handling of cgroup v1/v2 in mixed hierarchy.
Symbol resolving:
- Add OCaml symbol demangling.
- Further fixes for handling PE executables when using perf with Wine and .exe/.dll files.
- Fix 'perf unwind' DSO handling.
- Resolve symbols against debug file first, to deal with artifacts related to LTO.
- Fix gap between kernel end and module start on powerpc.
Reporting tools:
- The DSO filter shouldn't show samples in unresolved maps.
- Improve debuginfod support in various tools.
build ids:
- Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test' entry for that case.
perf test:
- Support for PERF_SAMPLE_WEIGHT_STRUCT.
- Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.
- Shell based tests for 'perf daemon's commands ('start', 'stop, 'reconfig', 'list', etc).
- ARM cs-etm 'perf test' fixes.
- Add parse-metric memory bandwidth testcase.
Compiler related:
- Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used with -fpatchable-function-entry.
- Fix ARM64 build with gcc 11's -Wformat-overflow.
- Fix unaligned access in sample parsing test.
- Fix printf conversion specifier for IP addresses on arm64, s390 and powerpc.
Arch specific:
- Support exposing Performance Monitor Counter SPRs as part of extended regs on powerpc.
- Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn DDR, fix imx8mm ones.
- Fix common and uarch events for ARM64's A76 and Ampere eMag
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYDANTQAKCRCyPKLppCJ+
J4veAQCISY1BPHscUTRYhq9cwU/Zs0ImtX7zDT4jxaP39JkduAD/eSqYavAJrtQh
HDyEiTgZ7CQSp5eCbXkzrnet4n3G9QE=
=H/Jk
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Support instruction latency in 'perf report', with both memory
latency (weight) and instruction latency information, users can
locate expensive load instructions and understand time spent in
different stages.
- Extend 'perf c2c' to display the number of loads which were blocked
by data or address conflict.
- Add 'perf stat' support for L2 topdown events in systems such as
Intel's Sapphire rapids server.
- Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a
sort key, for instance:
perf report --stdio --sort=comm,symbol,code_page_size
- New 'perf daemon' command to run long running sessions while
providing a way to control the enablement of events without
restarting a traditional 'perf record' session.
- Enable counting events for BPF programs in 'perf stat' just like
for other targets (tid, cgroup, cpu, etc), e.g.:
# perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
^C
The example above counts 'cycles' and 'ref-cycles' of BPF program
of id 254. It is similar to bpftool-prog-profile command, but more
flexible.
- Support the new layout for PERF_RECORD_MMAP2 to carry the DSO
build-id using infrastructure generalised from the eBPF subsystem,
removing the need for traversing the perf.data file to collect
build-ids at the end of 'perf record' sessions and helping with
long running sessions where binaries can get replaced in updates,
leading to possible mis-resolution of symbols.
- Support filtering by hex address in 'perf script'.
- Support DSO filter in 'perf script', like in other perf tools.
- Add namespaces support to 'perf inject'
- Add support for SDT (Dtrace Style Markers) events on ARM64.
perf record:
- Fix handling of eventfd() when draining a buffer in 'perf record'.
- Improvements to the generation of metadata events for pre-existing
threads (mmaps, comm, etc), speeding up the work done at the start
of system wide or per CPU 'perf record' sessions.
Hardware tracing:
- Initial support for tracing KVM with Intel PT.
- Intel PT fixes for IPC
- Support Intel PT PSB (synchronization packets) events.
- Automatically group aux-output events to overcome --filter syntax.
- Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.
- Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.
perf annotate TUI:
- Fix handling of 'k' ("show line number") hotkey
- Fix jump parsing for C++ code.
perf probe:
- Add protection to avoid endless loop.
cgroups:
- Avoid reading cgroup mountpoint multiple times, caching it.
- Fix handling of cgroup v1/v2 in mixed hierarchy.
Symbol resolving:
- Add OCaml symbol demangling.
- Further fixes for handling PE executables when using perf with Wine
and .exe/.dll files.
- Fix 'perf unwind' DSO handling.
- Resolve symbols against debug file first, to deal with artifacts
related to LTO.
- Fix gap between kernel end and module start on powerpc.
Reporting tools:
- The DSO filter shouldn't show samples in unresolved maps.
- Improve debuginfod support in various tools.
build ids:
- Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test'
entry for that case.
perf test:
- Support for PERF_SAMPLE_WEIGHT_STRUCT.
- Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.
- Shell based tests for 'perf daemon's commands ('start', 'stop,
'reconfig', 'list', etc).
- ARM cs-etm 'perf test' fixes.
- Add parse-metric memory bandwidth testcase.
Compiler related:
- Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used
with -fpatchable-function-entry.
- Fix ARM64 build with gcc 11's -Wformat-overflow.
- Fix unaligned access in sample parsing test.
- Fix printf conversion specifier for IP addresses on arm64, s390 and
powerpc.
Arch specific:
- Support exposing Performance Monitor Counter SPRs as part of
extended regs on powerpc.
- Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn
DDR, fix imx8mm ones.
- Fix common and uarch events for ARM64's A76 and Ampere eMag"
* tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits)
perf buildid-cache: Don't skip 16-byte build-ids
perf buildid-cache: Add test for 16-byte build-id
perf symbol: Remove redundant libbfd checks
perf test: Output the sub testing result in cs-etm
perf test: Suppress logs in cs-etm testing
perf tools: Fix arm64 build error with gcc-11
perf intel-pt: Add documentation for tracing virtual machines
perf intel-pt: Split VM-Entry and VM-Exit branches
perf intel-pt: Adjust sample flags for VM-Exit
perf intel-pt: Allow for a guest kernel address filter
perf intel-pt: Support decoding of guest kernel
perf machine: Factor out machine__idle_thread()
perf machine: Factor out machines__find_guest()
perf intel-pt: Amend decoder to track the NR flag
perf intel-pt: Retain the last PIP packet payload as is
perf intel_pt: Add vmlaunch and vmresume as branches
perf script: Add branch types for VM-Entry and VM-Exit
perf auxtrace: Automatically group aux-output events
perf test: Fix unaligned access in sample parsing test
perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing
...
|
|
|
Nicholas Fraser
|
3027ce36cc |
perf buildid-cache: Don't skip 16-byte build-ids
lsdir_bid_tail_filter() ignored any build-id that wasn't exactly 20 bytes. This worked only for SHA-1 build-ids. The build-id for a PE file is always a 16-byte GUID and ELF files can also have MD5 or UUID build-ids. This fix changes the filter to allow build-ids between 16 and 20 bytes. Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Huw Davies <huw@codeweavers.com> Cc: Ian Rogers <irogers@google.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Song Liu <songliubraving@fb.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: http://lore.kernel.org/lkml/597788e4-661d-633f-857c-3de700115d02@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Nicholas Fraser
|
206236d328 |
perf buildid-cache: Add test for 16-byte build-id
tests/shell/buildid.sh added an ELF executable with an MD5 build-id to the perf debug cache but did not check whether the object was printed by a subsequent call to "perf buildid-cache -l". It was being omitted from the list. A previous commit fixed the bug that left it out of the list. This adds a test for it. Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Huw Davies <huw@codeweavers.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Song Liu <songliubraving@fb.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: https://lore.kernel.org/r/c08be235-7434-5208-5f21-e8c9a3265464@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Nicholas Fraser
|
bff8b3072e |
perf symbol: Remove redundant libbfd checks
This removes the redundant checks bfd_check_format() and bfd_target_elf_flavour. They were previously checking different files. Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Huw Davies <huw@codeweavers.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Song Liu <songliubraving@fb.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Ulrich Czekalla <uczekalla@codeweavers.com> Link: https://lore.kernel.org/r/94758ca1-0031-d7c6-6c6a-900fd77ef695@codeweavers.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Leo Yan
|
11d45d4fb9 |
perf test: Output the sub testing result in cs-etm
The CoreSight testing contains sub cases, e.g. every CPU iterates the possible conntected sinks and tests the paths between the associated ETM with the found sink. Besides the per-thread testing, it also contains system wide testing and snapshot testing. To easier observe results for the sub cases, this patch introduces a new function arm_cs_report(), it outputs the result as "PASS" or "FAIL" for every sub case; and it records the error in the variable "glb_err" which is used as the final return value when exits the testing. Before: # perf test 73 -v 73: Check Arm CoreSight trace data recording and synthesized samples: --- start --- test child forked, pid 17423 Recording trace (only user mode) with path: CPU0 => tmc_etf0 Looking at perf.data file for dumping branch samples: Looking at perf.data file for reporting branch samples: Looking at perf.data file for instruction samples: Recording trace (only user mode) with path: CPU0 => tmc_etr0 Looking at perf.data file for dumping branch samples: Looking at perf.data file for reporting branch samples: Looking at perf.data file for instruction samples: [...] After: # perf test 73 -v 73: Check Arm CoreSight trace data recording and synthesized samples: --- start --- test child forked, pid 17423 Recording trace (only user mode) with path: CPU0 => tmc_etf0 Looking at perf.data file for dumping branch samples: Looking at perf.data file for reporting branch samples: Looking at perf.data file for instruction samples: CoreSight path testing (CPU0 -> tmc_etf0): PASS Recording trace (only user mode) with path: CPU0 => tmc_etr0 Looking at perf.data file for dumping branch samples: Looking at perf.data file for reporting branch samples: Looking at perf.data file for instruction samples: CoreSight path testing (CPU0 -> tmc_etr0): PASS [...] Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Basil Eljuse <basil.eljuse@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lore.kernel.org/lkml/20210215115944.535986-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Leo Yan
|
46355e3d79 |
perf test: Suppress logs in cs-etm testing
With the option '-v' for the verbose logs, "perf test" outputs tons of logs for the CoreSight case, the logs are mainly introduced by the decoding. And it outputs some trivial info from "perf record" command and there have debugging info for CPU number and device name when iterates between ETMs and sinks. For a neat output format, this patch redirects the output logs to "/dev/null", thus can avoid to flood logs. And it removes the redundant log for CPU number and device name, which have already printed out the relevant info in the function record_touch_file(). Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Basil Eljuse <basil.eljuse@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lore.kernel.org/lkml/20210215115944.535986-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Jianlin Lv
|
067012974c |
perf tools: Fix arm64 build error with gcc-11
gcc version: 11.0.0 20210208 (experimental) (GCC)
Following build error on arm64:
.......
In function ‘printf’,
inlined from ‘regs_dump__printf’ at util/session.c:1141:3,
inlined from ‘regs__printf’ at util/session.c:1169:2:
/usr/include/aarch64-linux-gnu/bits/stdio2.h:107:10: \
error: ‘%-5s’ directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, \
__va_arg_pack ());
......
In function ‘fprintf’,
inlined from ‘perf_sample__fprintf_regs.isra’ at \
builtin-script.c:622:14:
/usr/include/aarch64-linux-gnu/bits/stdio2.h💯10: \
error: ‘%5s’ directive argument is null [-Werror=format-overflow=]
100 | return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt,
101 | __va_arg_pack ());
cc1: all warnings being treated as errors
.......
This patch fixes Wformat-overflow warnings. Add helper function to
convert NULL to "unknown".
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: iecedge@gmail.com
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210218031245.2078492-1-Jianlin.Lv@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
|
Adrian Hunter
|
865eb3fb3b |
perf intel-pt: Add documentation for tracing virtual machines
Add documentation to the perf-intel-pt man page for tracing virtual machines. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-12-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
19854e45b3 |
perf intel-pt: Split VM-Entry and VM-Exit branches
Events record a single cpumode so the tools cannot handle a branch from the host machine to a virtual machine, or vice versa. Split it in two so that each branch can have a different cpumode. E.g. host ip -> guest ip becomes: host ip -> 0 0 -> guest ip Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-11-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
695fc45106 |
perf intel-pt: Adjust sample flags for VM-Exit
Use the change of NR to detect whether an asynchronous branch is a VM-Exit. Note VM-Entry is determined from the vmlaunch or vmresume instruction, in which case, sample flags will show "VMentry" even if the VM-Entry fails. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-10-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
65faca5ce8 |
perf intel-pt: Allow for a guest kernel address filter
Handling TIP.PGD for an address filter for a guest kernel is the same as a host kernel, but user space decoding, and hence address filters, are not supported. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-9-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
6e86bfdc4a |
perf intel-pt: Support decoding of guest kernel
The guest kernel can be found from any guest thread belonging to the guest machine. The guest machine is associated with the current host process pid. An idle thread (pid=tid=0) is created as a vehicle from which to find the guest kernel map. Decoding guest user space is not supported. Synthesized samples just need the cpumode set for the guest. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-8-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
3035cb6cbd |
perf machine: Factor out machine__idle_thread()
Factor out machine__idle_thread() so it can be re-used for guest machines. A thread is needed to find executable code, even for the guest kernel. To avoid possible future pid number conflicts, the idle thread can be used. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
fcda5ff711 |
perf machine: Factor out machines__find_guest()
Factor out machines__find_guest() so it can be re-used. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
|
|
Adrian Hunter
|
80a038860b |
perf intel-pt: Amend decoder to track the NR flag
The PIP packet NR (non-root) flag indicates whether or not a virtual machine is being traced (NR=1 => VM). Add support for tracking its value. In particular note that the PIP packet (outside of PSB+) will be associated with a TIP packet from which address the NR value takes effect. At that point, there is a branch from_ip, to_ip with corresponding from_nr and to_nr. In the event of VM-Entry failure, there should still PIP and TIP packets that can be followed in the same way. Also note that this assumes that a host VMM is not employing VMX controls that affect Intel PT, e.g. to hide the host from a guest using Intel PT. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210218095801.19576-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |