Clean up the fib6_null_entry handling in ip6_pol_route_lookup.
rt6_device_match can return fib6_null_entry, but fib6_multipath_select
can not. Consolidate the fib6_null_entry handling and on the final
null_entry check set rt and goto out - no need to defer to a second
check after rt6_find_cached_rt.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
find_rr_leaf has 3 loops over fib_entries calling find_match. The loops
are very similar with differences in start point and whether the metric
is evaluated:
1. start at rr_head, no extra loop compare, check fib metric
2. start at leaf, compare rt against rr_head, check metric
3. start at cont (potential saved point from earlier loops), no
extra loop compare, no metric check
Create 1 loop that is called 3 different times. This will make a
later change with multipath nexthop objects much simpler.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
find_match primarily needs a fib6_nh (and fib6_flags which it passes
through to rt6_score_route). Move fib6_check_expired up to the call
sites so find_match is only called for relevant entries. Remove the
match argument which is mostly a pass through and use the return
boolean to decide if match gets set in the call sites.
The end result is a helper that can be called per fib6_nh struct
which is needed once fib entries reference nexthop objects that
have more than one fib6_nh.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt6_score_route only needs the fib6_flags and nexthop data. Change
it accordingly. Allows re-use later for nexthop based fib6_nh.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt6_probe sends probes for gateways in a nexthop. As such it really
depends on a fib6_nh, not a fib entry. Move last_probe to fib6_nh and
update rt6_probe to a fib6_nh struct.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt6_check_dev is a simpler helper with only 1 caller. Fold the code
into rt6_score_route.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change rt6_check_neigh to take a fib6_nh instead of a fib entry.
Move the check on fib_flags and whether the nexthop has a gateway
up to the one caller.
Remove the inline from the definition as well. Not necessary.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The zero namelen check is redundant as it has already been checked
for zero at the start of the function. Remove the redundant check.
Addresses-Coverity: ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Maguire says:
====================
Extend bpf_skb_adjust_room growth to mark inner MAC header so
that L2 encapsulation can be used for tc tunnels.
Patch #1 extends the existing test_tc_tunnel to support UDP
encapsulation; later we want to be able to test MPLS over UDP
and MPLS over GRE encapsulation.
Patch #2 adds the BPF_F_ADJ_ROOM_ENCAP_L2(len) macro, which
allows specification of inner mac length. Other approaches were
explored prior to taking this approach. Specifically, I tried
automatically computing the inner mac length on the basis of the
specified flags (so inner maclen for GRE/IPv4 encap is the len_diff
specified to bpf_skb_adjust_room minus GRE + IPv4 header length
for example). Problem with this is that we don't know for sure
what form of GRE/UDP header we have; is it a full GRE header,
or is it a FOU UDP header or generic UDP encap header? My fear
here was we'd end up with an explosion of flags. The other approach
tried was to support inner L2 header marking as a separate room
adjustment, i.e. adjust for L3/L4 encap, then call
bpf_skb_adjust_room for L2 encap. This can be made to work but
because it imposed an order on operations, felt a bit clunky.
Patch #3 syncs tools/ bpf.h.
Patch #4 extends the tests again to support MPLSoverGRE,
MPLSoverUDP, and transparent ethernet bridging (TEB) where
the inner L2 header is an ethernet header. Testing of BPF
encap against tunnels is done for cases where configuration
of such tunnels is possible (MPLSoverGRE[6], MPLSoverUDP,
gre[6]tap), and skipped otherwise. Testing of BPF encap/decap
is always carried out.
Changes since v2:
- updated tools/testing/selftest/bpf/config with FOU/MPLS CONFIG
variables (patches 1, 4)
- reduced noise in patch 1 by avoiding unnecessary movement of code
- eliminated inner_mac variable in bpf_skb_net_grow (patch 2)
Changes since v1:
- fixed formatting of commit references.
- BPF_F_ADJ_ROOM_FIXED_GSO flag enabled on all variants (patch 1)
- fixed fou6 options for UDP encap; checksum errors observed were
due to the fact fou6 tunnel was not set up with correct ipproto
options (41 -6). 0 checksums work fine (patch 1)
- added definitions for mask and shift used in setting L2 length
(patch 2)
- allow udp encap with fixed GSO (patch 2)
- changed "elen" to "l2_len" to be more descriptive (patch 4)
====================
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sync include/uapi/linux/bpf.h with tools/ equivalent to add
BPF_F_ADJ_ROOM_ENCAP_L2(len) macro.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
commit 868d523535 ("bpf: add bpf_skb_adjust_room encap flags")
introduced support to bpf_skb_adjust_room for GSO-friendly GRE
and UDP encapsulation.
For GSO to work for skbs, the inner headers (mac and network) need to
be marked. For L3 encapsulation using bpf_skb_adjust_room, the mac
and network headers are identical. Here we provide a way of specifying
the inner mac header length for cases where L2 encap is desired. Such
an approach can support encapsulated ethernet headers, MPLS headers etc.
For example to convert from a packet of form [eth][ip][tcp] to
[eth][ip][udp][inner mac][ip][tcp], something like the following could
be done:
headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen;
ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC,
BPF_F_ADJ_ROOM_ENCAP_L4_UDP |
BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 |
BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen));
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
commit 868d523535 ("bpf: add bpf_skb_adjust_room encap flags")
introduced support to bpf_skb_adjust_room for GSO-friendly GRE
and UDP encapsulation and later introduced associated test_tc_tunnel
tests. Here those tests are extended to cover UDP encapsulation also.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In the function tipc_node_create() we protect the peer capability field
by using the node rw_lock. However, we access the lock directly instead
of using the dedicated functions for this, as we do everywhere else in
node.c. This cosmetic spot is fixed here.
Fixes: 40999f11ce ("tipc: make link capability update thread safe")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b0b9395d86 ("bpf: support input __sk_buff context in
BPF_PROG_TEST_RUN") started using bpf_check_uarg_tail_zero in
BPF_PROG_TEST_RUN. However, bpf_check_uarg_tail_zero is not defined
for !CONFIG_BPF_SYSCALL:
net/bpf/test_run.c: In function ‘bpf_ctx_init’:
net/bpf/test_run.c:142:9: error: implicit declaration of function ‘bpf_check_uarg_tail_zero’ [-Werror=implicit-function-declaration]
err = bpf_check_uarg_tail_zero(data_in, max_size, size);
^~~~~~~~~~~~~~~~~~~~~~~~
Let's not build net/bpf/test_run.c when CONFIG_BPF_SYSCALL is not set.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: b0b9395d86 ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Only reason for having two different register functions was because of
ipt_MASQUERADE and ip6t_MASQUERADE being two different modules.
Previous patch merged those into xt_MASQUERADE, so we can merge this too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need to have separate modules for this.
before:
text data bss dec filename
2038 1168 0 3206 net/ipv4/netfilter/ipt_MASQUERADE.ko
1526 1024 0 2550 net/ipv6/netfilter/ip6t_MASQUERADE.ko
after:
text data bss dec filename
2521 1296 0 3817 net/netfilter/xt_MASQUERADE.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Both are now implemented by nf_nat_masquerade.c, so no need to keep
different headers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Implementation of function rhashtable_insert_fast() check if its internal
helper function __rhashtable_insert_fast() returns non-NULL pointer and
seemingly return -EEXIST in such case. However, since
__rhashtable_insert_fast() is called with NULL key pointer, it never
actually checks for duplicates, which means that -EEXIST is never returned
to the user. Use rhashtable_lookup_insert_fast() hash table API instead. In
order to verify that it works as expected and prevent the problem from
happening in future, extend tc-tests with new test that verifies that no
new filters with existing key can be inserted to flower classifier.
Fixes: 1f17f7742e ("net: sched: flower: insert filter to ht before offloading it to hw")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETNSA_NSID is signed. Use nla_get_s32() to avoid confusion.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simple test that sets cb to {1,2,3,4,5} and priority to 6, runs bpf
program that fails if cb is not what we expect and increments cb[i] and
priority. When the test finishes, we check that cb is now {2,3,4,5,6}
and priority is 7.
We also test the sanity checks:
* ctx_in is provided, but ctx_size_in is zero (same for
ctx_out/ctx_size_out)
* unexpected non-zero fields in __sk_buff return EINVAL
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Support recently introduced input/output context for test runs.
We extend only bpf_prog_test_run_xattr. bpf_prog_test_run is
unextendable and left as is.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add new set of arguments to bpf_attr for BPF_PROG_TEST_RUN:
* ctx_in/ctx_size_in - input context
* ctx_out/ctx_size_out - output context
The intended use case is to pass some meta data to the test runs that
operate on skb (this has being brought up on recent LPC).
For programs that use bpf_prog_test_run_skb, support __sk_buff input and
output. Initially, from input __sk_buff, copy _only_ cb and priority into
skb, all other non-zero fields are prohibited (with EINVAL).
If the user has set ctx_out/ctx_size_out, copy the potentially modified
__sk_buff back to the userspace.
We require all fields of input __sk_buff except the ones we explicitly
support to be set to zero. The expectation is that in the future we might
add support for more fields and we want to fail explicitly if the user
runs the program on the kernel where we don't yet support them.
The API is intentionally vague (i.e. we don't explicitly add __sk_buff
to bpf_attr, but ctx_in) to potentially let other test_run types use
this interface in the future (this can be xdp_md for xdp types for
example).
v4:
* don't copy more than allowed in bpf_ctx_init [Martin]
v3:
* handle case where ctx_in is NULL, but ctx_out is not [Martin]
* convert size==0 checks to ptr==NULL checks and add some extra ptr
checks [Martin]
v2:
* Addressed comments from Martin Lau
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Let's add a way to know whether a program has btf context.
Patch adds 'btf_id' in the output of program listing.
When btf_id is present, it means program has btf context.
Sample output:
user@test# bpftool prog list
25: xdp name xdp_prog1 tag 539ec6ce11b52f98 gpl
loaded_at 2019-04-10T11:44:20+0900 uid 0
xlated 488B not jited memlock 4096B map_ids 23
btf_id 1
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reported in [1].
With gcc 8.3.0 the following error is issued:
cc -Ibpf@sta -I. -I.. -I.././include -I.././include/uapi
-fdiagnostics-color=always -fsanitize=address,undefined -fno-omit-frame-pointer
-pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -g -fPIC -g -O2
-Werror -Wall -Wno-pointer-arith -Wno-sign-compare -MD -MQ
'bpf@sta/src_libbpf.c.o' -MF 'bpf@sta/src_libbpf.c.o.d' -o
'bpf@sta/src_libbpf.c.o' -c ../src/libbpf.c
../src/libbpf.c: In function 'bpf_object__elf_collect':
../src/libbpf.c:947:18: error: 'map_def_sz' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
if (map_def_sz <= sizeof(struct bpf_map_def)) {
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/libbpf.c:827:18: note: 'map_def_sz' was declared here
int i, map_idx, map_def_sz, nr_syms, nr_maps = 0, nr_maps_glob = 0;
^~~~~~~~~~
According to [2] -Wmaybe-uninitialized is enabled by -Wall.
Same error is generated by clang's -Wconditional-uninitialized.
[1] https://github.com/libbpf/libbpf/pull/29#issuecomment-481902601
[2] https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
Fixes: d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Redirect email addresses from git log to the mainly used ones
for Alexei and myself such that it is consistent with the ones
in MAINTAINERS file. Useful in particular when git mailmap is
enabled on broader scope, for example:
$ git config --global log.mailmap true
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Remove not useful protocol version check in gue_udp_recv since just
gue version 0 can hit that code. Moreover remove duplicated hdrlen
computation
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct spelling of encapsulation.
Found by inspection.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leandro Dorileo says:
====================
net/sched: taprio: fix picos_per_byte miscalculation
This set fixes miscalculations based on invalid link speed values.
Changes in v6:
+ Avoid locking a spinlock while calling __ethtool_get_link_ksettings()
(suggested by: Cong Wang);
Changes in v5:
+ Don't iterate over all the net_device maintained list (suggested by: Florian Fainelli);
Changes in v4:
+ converted pr_info calls to netdev_dbg (suggested by: Florian Fainelli);
Changes in v3:
+ yet pr_info() format warnings;
Changes in v2:
+ fixed pr_info() format both on cbs and taprio patches;
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The Credit Based Shaper heavily depends on link speed to calculate
the scheduling credits, we can't properly calculate the credits if the
device has failed to report the link speed.
In that case we can't dequeue packets assuming a wrong port rate that will
result into an inconsistent credit distribution.
This patch makes sure we fail to dequeue case:
1) __ethtool_get_link_ksettings() reports error or 2) the ethernet driver
failed to set the ksettings' speed value (setting link speed to
SPEED_UNKNOWN).
Additionally we properly re calculate the port rate whenever the link speed
is changed.
Fixes: 3d0bd028ff ("net/sched: Add support for HW offloading for CBS")
Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Reviewed-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Time Aware Priority Scheduler is heavily dependent to link speed,
it relies on it to calculate transmission bytes per cycle, we can't
properly calculate the so called budget if the device has failed
to report the link speed.
In that case we can't dequeue packets assuming a wrong budget.
This patch makes sure we fail to dequeue case:
1) __ethtool_get_link_ksettings() reports error or 2) the ethernet
driver failed to set the ksettings' speed value (setting link speed
to SPEED_UNKNOWN).
Additionally we re calculate the budget whenever the link speed is
changed.
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Reviewed-by: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Govindarajulu reported a regression with Network Manager which sends an
RTA_GATEWAY attribute with the address set to 0. Fixup the handling of
RTA_GATEWAY to only set fc_gw_family if the gateway address is actually
set.
Fixes: f35b794b3b ("ipv4: Prepare fib_config for IPv6 gateway")
Reported-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
net: sched: move back qlen to per CPU accounting
The commit 46b1c18f9d ("net: sched: put back q.qlen into a single location")
introduced some measurable regression in the contended scenarios for
lock qdisc.
As Eric suggested we could replace q.qlen access with calls to qdisc_is_empty()
in the datapath and revert the above commit. The TC subsystem updates
qdisc->is_empty in a somewhat loose way: notably 'is_empty' is set only when
the qdisc dequeue() calls return a NULL ptr. That is, the invocation after
the last packet is dequeued.
The above is good enough for BYPASS implementation - the only downside is that
we end up avoiding the optimization for a very small time-frame - but will
break hard things when internal structures consistency for classful qdisc
relies on child qdisc_is_empty().
A more strict 'is_empty' update adds a relevant complexity to its life-cycle, so
this series takes a different approach: we allow lockless qdisc to switch from
per CPU accounting to global stats accounting when the NOLOCK bit is cleared.
Since most pieces of infrastructure are already in place, this requires very
little changes to the pfifo_fast qdisc, and any later NOLOCK qdisc can hook
there with little effort - no need to maintain two different implementations.
The first 2 patches removes direct qlen access from non core TC code, the 3rd
and 4th patches place and use the infrastructure to allow stats account
switching and the 5th patch is the actual revert.
v1 -> v2:
- fixed build issues
- more descriptive commit message for patch 5/5
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This revert commit 46b1c18f9d ("net: sched: put back q.qlen into
a single location").
After the previous patch, when a NOLOCK qdisc is enslaved to a
locking qdisc it switches to global stats accounting. As a consequence,
when a classful qdisc accesses directly a child qdisc's qlen, such
qdisc is not doing per CPU accounting and qlen value is consistent.
In the control path nobody uses directly qlen since commit
e5f0e8f8e4 ("net: sched: introduce and use qdisc tree flush/purge
helpers"), so we can remove the contented atomic ops from the
datapath.
v1 -> v2:
- complete the qdisc_qstats_atomic_qlen_dec() ->
qdisc_qstats_cpu_qlen_dec() replacement, fix build issue
- more descriptive commit message
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since stats updating is always consistent with TCQ_F_CPUSTATS flag,
we can disable it at qdisc creation time flipping such bit.
In my experiments, if the NOLOCK flag is cleared, per CPU stats
accounting does not give any measurable performance gain, but it
waste some memory.
Let's clear TCQ_F_CPUSTATS together with NOLOCK, when enslaving
a NOLOCK qdisc to 'lock' one.
Use stats update helper inside pfifo_fast, to cope correctly with
TCQ_F_CPUSTATS flag change.
As a side effect, q.qlen value for any child qdiscs is always
consistent for all lock classfull qdiscs.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The core sched implementation checks independently for NOLOCK flag
to acquire/release the root spin lock and for qdisc_is_percpu_stats()
to account per CPU values in many places.
This change update the last few places checking the TCQ_F_NOLOCK to
do per CPU stats accounting according to qdisc_is_percpu_stats()
value.
The above allows to clean dev_requeue_skb() implementation a bit
and makes stats update always consistent with a single flag.
v1 -> v2:
- do not move qdisc_is_empty definition, fix build issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When checking for root qdisc queue length, do not access directly q.qlen.
In the following patches we will move back qlen accounting to per CPU
values for NOLOCK qdiscs.
Instead, prefer the qdisc_is_empty() helper usage.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Such helper does not cope correctly with NOLOCK qdiscs.
In the following patches we will move back qlen to per CPU
values for such qdiscs, so qdisc_qlen_sum() is not an option,
too.
Instead, use qlen only for lock qdiscs, and always set
flow off for NOLOCK qdiscs with a not empty tx queue.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit da11b41758 ("libbpf: teach libbpf about log_level bit 2"),
the BPF_LOG_BUF_SIZE was increased to 16M. The XDP socket part of
libbpf allocated the log_buf on the stack, but for the new 16M buffer
size this is not going to work. Change the code so it uses a 16K buffer
instead.
Fixes: da11b41758 ("libbpf: teach libbpf about log_level bit 2")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The issue is reported at https://github.com/libbpf/libbpf/issues/28.
Basically, per C standard, for
void *memcpy(void *dest, const void *src, size_t n)
if "dest" or "src" is NULL, regardless of whether "n" is 0 or not,
the result of memcpy is undefined. clang ubsan reported three such
instances in bpf.c with the following pattern:
memcpy(dest, 0, 0).
Although in practice, no known compiler will cause issues when
copy size is 0. Let us still fix the issue to silence ubsan
warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
This series is a major rework of previously submitted libbpf
patches [0] in order to add global data support for BPF. The
kernel has been extended to add proper infrastructure that allows
for full .bss/.data/.rodata sections on BPF loader side based
upon feedback from LPC discussions [1]. Latter support is then
also added into libbpf in this series which allows for more
natural C-like programming of BPF programs. For more information
on loader, please refer to 'bpf, libbpf: support global data/bss/
rodata sections' patch in this series.
Thanks a lot!
v5 -> v6:
- Removed synchronize_rcu() from map freeze (Jann)
- Rest as-is
v4 -> v5:
- Removed index selection again for ldimm64 (Alexei)
- Adapted related test cases and added new ones to test
rejection of off != 0
v3 -> v4:
- Various fixes in BTF verification e.g. to disallow
Var and DataSec to be an intermediate type during resolve (Martin)
- More BTF test cases added
- Few cleanups in key-less BTF commit (Martin)
- Bump libbpf minor version from 2 to 3
- Renamed and simplified read-only locking
- Various minor improvements all over the place
v2 -> v3:
- Implement BTF support in kernel, libbpf, bpftool, add tests
- Fix idx + off conversion (Andrii)
- Document lower / higher bits for direct value access (Andrii)
- Add tests with small value size (Andrii)
- Add index selection into ldimm64 (Andrii)
- Fix missing fdput() (Jann)
- Reject invalid flags in BPF_F_*_PROG (Jakub)
- Complete rework of libbpf support, includes:
- Add objname to map name (Stanislav)
- Make .rodata map full read-only after setup (Andrii)
- Merge relocation handling into single one (Andrii)
- Store global maps into obj->maps array (Andrii, Alexei)
- Debug message when skipping section (Andrii)
- Reject non-static global data till we have
semantics for sharing them (Yonghong, Andrii, Alexei)
- More test cases and completely reworked prog test (Alexei)
- Fixes, cleanups, etc all over the set
- Not yet addressed:
- Make BTF mandatory for these maps (Alexei)
-> Waiting till BTF support for these lands first
v1 -> v2:
- Instead of 32-bit static data, implement full global
data support (Alexei)
[0] https://patchwork.ozlabs.org/cover/1040290/
[1] http://vger.kernel.org/lpc-bpf2018.html#session-3
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend test_btf with various positive and negative tests around
BTF verification of kind Var and DataSec. All passing as well:
# ./test_btf
[...]
BTF raw test[4] (global data test #1): OK
BTF raw test[5] (global data test #2): OK
BTF raw test[6] (global data test #3): OK
BTF raw test[7] (global data test #4, unsupported linkage): OK
BTF raw test[8] (global data test #5, invalid var type): OK
BTF raw test[9] (global data test #6, invalid var type (fwd type)): OK
BTF raw test[10] (global data test #7, invalid var type (fwd type)): OK
BTF raw test[11] (global data test #8, invalid var size): OK
BTF raw test[12] (global data test #9, invalid var size): OK
BTF raw test[13] (global data test #10, invalid var size): OK
BTF raw test[14] (global data test #11, multiple section members): OK
BTF raw test[15] (global data test #12, invalid offset): OK
BTF raw test[16] (global data test #13, invalid offset): OK
BTF raw test[17] (global data test #14, invalid offset): OK
BTF raw test[18] (global data test #15, not var kind): OK
BTF raw test[19] (global data test #16, invalid var referencing sec): OK
BTF raw test[20] (global data test #17, invalid var referencing var): OK
BTF raw test[21] (global data test #18, invalid var loop): OK
BTF raw test[22] (global data test #19, invalid var referencing var): OK
BTF raw test[23] (global data test #20, invalid ptr referencing var): OK
BTF raw test[24] (global data test #21, var included in struct): OK
BTF raw test[25] (global data test #22, array of var): OK
[...]
PASS:167 SKIP:0 FAIL:0
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend test_verifier with various test cases around the two kernel
extensions, that is, {rd,wr}only map support as well as direct map
value access. All passing, one skipped due to xskmap not present
on test machine:
# ./test_verifier
[...]
#948/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK
#949/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK
#950/p XDP pkt read, pkt_data <= pkt_meta', good access OK
#951/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
#952/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
Summary: 1410 PASSED, 1 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the ability to bpftool to handle BTF Var and DataSec kinds
in order to dump them out of btf_dumper_type(). The value has a
single object with the section name, which itself holds an array
of variables it dumps. A single variable is an object by itself
printed along with its name. From there further type information
is dumped along with corresponding value information.
Example output from .rodata:
# ./bpftool m d i 150
[{
"value": {
".rodata": [{
"load_static_data.bar": 18446744073709551615
},{
"num2": 24
},{
"num5": 43947
},{
"num6": 171
},{
"str0": [97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,0,0,0,0,0,0
]
},{
"struct0": {
"a": 42,
"b": 4278120431,
"c": 1229782938247303441
}
},{
"struct2": {
"a": 0,
"b": 0,
"c": 0
}
}
]
}
}
]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds libbpf support for BTF Var and DataSec kinds. Main point
here is that libbpf needs to do some preparatory work before the
whole BTF object can be loaded into the kernel, that is, fixing up
of DataSec size taken from the ELF section size and non-static
variable offset which needs to be taken from the ELF's string section.
Upstream LLVM doesn't fix these up since at time of BTF emission
it is too early in the compilation process thus this information
isn't available yet, hence loader needs to take care of it.
Note, deduplication handling has not been in the scope of this work
and needs to be addressed in a future commit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://reviews.llvm.org/D59441
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work adds BPF loader support for global data sections
to libbpf. This allows to write BPF programs in more natural
C-like way by being able to define global variables and const
data.
Back at LPC 2018 [0] we presented a first prototype which
implemented support for global data sections by extending BPF
syscall where union bpf_attr would get additional memory/size
pair for each section passed during prog load in order to later
add this base address into the ldimm64 instruction along with
the user provided offset when accessing a variable. Consensus
from LPC was that for proper upstream support, it would be
more desirable to use maps instead of bpf_attr extension as
this would allow for introspection of these sections as well
as potential live updates of their content. This work follows
this path by taking the following steps from loader side:
1) In bpf_object__elf_collect() step we pick up ".data",
".rodata", and ".bss" section information.
2) If present, in bpf_object__init_internal_map() we add
maps to the obj's map array that corresponds to each
of the present sections. Given section size and access
properties can differ, a single entry array map is
created with value size that is corresponding to the
ELF section size of .data, .bss or .rodata. These
internal maps are integrated into the normal map
handling of libbpf such that when user traverses all
obj maps, they can be differentiated from user-created
ones via bpf_map__is_internal(). In later steps when
we actually create these maps in the kernel via
bpf_object__create_maps(), then for .data and .rodata
sections their content is copied into the map through
bpf_map_update_elem(). For .bss this is not necessary
since array map is already zero-initialized by default.
Additionally, for .rodata the map is frozen as read-only
after setup, such that neither from program nor syscall
side writes would be possible.
3) In bpf_program__collect_reloc() step, we record the
corresponding map, insn index, and relocation type for
the global data.
4) And last but not least in the actual relocation step in
bpf_program__relocate(), we mark the ldimm64 instruction
with src_reg = BPF_PSEUDO_MAP_VALUE where in the first
imm field the map's file descriptor is stored as similarly
done as in BPF_PSEUDO_MAP_FD, and in the second imm field
(as ldimm64 is 2-insn wide) we store the access offset
into the section. Given these maps have only single element
ldimm64's off remains zero in both parts.
5) On kernel side, this special marked BPF_PSEUDO_MAP_VALUE
load will then store the actual target address in order
to have a 'map-lookup'-free access. That is, the actual
map value base address + offset. The destination register
in the verifier will then be marked as PTR_TO_MAP_VALUE,
containing the fixed offset as reg->off and backing BPF
map as reg->map_ptr. Meaning, it's treated as any other
normal map value from verification side, only with
efficient, direct value access instead of actual call to
map lookup helper as in the typical case.
Currently, only support for static global variables has been
added, and libbpf rejects non-static global variables from
loading. This can be lifted until we have proper semantics
for how BPF will treat multi-object BPF loads. From BTF side,
libbpf will set the value type id of the types corresponding
to the ".bss", ".data" and ".rodata" names which LLVM will
emit without the object name prefix. The key type will be
left as zero, thus making use of the key-less BTF option in
array maps.
Simple example dump of program using globals vars in each
section:
# bpftool prog
[...]
6784: sched_cls name load_static_dat tag a7e1291567277844 gpl
loaded_at 2019-03-11T15:39:34+0000 uid 0
xlated 1776B jited 993B memlock 4096B map_ids 2238,2237,2235,2236,2239,2240
# bpftool map show id 2237
2237: array name test_glo.bss flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2235
2235: array name test_glo.data flags 0x0
key 4B value 64B max_entries 1 memlock 4096B
# bpftool map show id 2236
2236: array name test_glo.rodata flags 0x80
key 4B value 96B max_entries 1 memlock 4096B
# bpftool prog dump xlated id 6784
int load_static_data(struct __sk_buff * skb):
; int load_static_data(struct __sk_buff *skb)
0: (b7) r6 = 0
; test_reloc(number, 0, &num0);
1: (63) *(u32 *)(r10 -4) = r6
2: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
3: (07) r2 += -4
; test_reloc(number, 0, &num0);
4: (18) r1 = map[id:2238]
6: (18) r3 = map[id:2237][0]+0 <-- direct addr in .bss area
8: (b7) r4 = 0
9: (85) call array_map_update_elem#100464
10: (b7) r1 = 1
; test_reloc(number, 1, &num1);
[...]
; test_reloc(string, 2, str2);
120: (18) r8 = map[id:2237][0]+16 <-- same here at offset +16
122: (18) r1 = map[id:2239]
124: (18) r3 = map[id:2237][0]+16
126: (b7) r4 = 0
127: (85) call array_map_update_elem#100464
128: (b7) r1 = 120
; str1[5] = 'x';
129: (73) *(u8 *)(r9 +5) = r1
; test_reloc(string, 3, str1);
130: (b7) r1 = 3
131: (63) *(u32 *)(r10 -4) = r1
132: (b7) r9 = 3
133: (bf) r2 = r10
; int load_static_data(struct __sk_buff *skb)
134: (07) r2 += -4
; test_reloc(string, 3, str1);
135: (18) r1 = map[id:2239]
137: (18) r3 = map[id:2235][0]+16 <-- direct addr in .data area
139: (b7) r4 = 0
140: (85) call array_map_update_elem#100464
141: (b7) r1 = 111
; __builtin_memcpy(&str2[2], "hello", sizeof("hello"));
142: (73) *(u8 *)(r8 +6) = r1 <-- further access based on .bss data
143: (b7) r1 = 108
144: (73) *(u8 *)(r8 +5) = r1
[...]
For Cilium use-case in particular, this enables migrating configuration
constants from Cilium daemon's generated header defines into global
data sections such that expensive runtime recompilations with LLVM can
be avoided altogether. Instead, the ELF file becomes effectively a
"template", meaning, it is compiled only once (!) and the Cilium daemon
will then rewrite relevant configuration data from the ELF's .data or
.rodata sections directly instead of recompiling the program. The
updated ELF is then loaded into the kernel and atomically replaces
the existing program in the networking datapath. More info in [0].
Based upon recent fix in LLVM, commit c0db6b6bd444 ("[BPF] Don't fail
for static variables").
[0] LPC 2018, BPF track, "ELF relocation for static data in BPF",
http://vger.kernel.org/lpc-bpf2018.html#session-3
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust the code for relocations slightly with no functional changes,
so that upcoming patches that will introduce support for relocations
into the .data, .rodata and .bss sections can be added independent
of these changes.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull in latest changes from both headers, so we can make use of
them in libbpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David Ahern