mirror of https://gitee.com/openkylin/linux.git
539 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Lorenzo Pieralisi
|
b8e069a2a8 |
ACPI/IORT: Add an input ID to acpi_dma_configure()
Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
|
|
Linus Torvalds
|
0c67f6b297 |
More power management updates for 5.8-rc1
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources
with devices where the list of power resources for power state
D0 (full power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=p5eu
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are operating performance points (OPP) framework updates mostly,
including support for interconnect bandwidth in the OPP core, plus a
few cpufreq changes, including boost support in the CPPC cpufreq
driver, an ACPI device power management fix and a hibernation code
cleanup.
Specifics:
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources with
devices where the list of power resources for power state D0 (full
power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET)"
* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Avoid using power resources if there are none for D0
cpufreq: CPPC: add SW BOOST support
cpufreq: change '.set_boost' to act on one policy
PM: hibernate: Add __init annotation to swsusp_header_init()
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
|
|
|
Mike Rapoport
|
65fddcfca8 |
mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Mike Rapoport
|
ca5999fde0 |
mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Rafael J. Wysocki
|
956ad9d98b |
ACPI: PM: Avoid using power resources if there are none for D0
As recently reported, some platforms provide a list of power
resources for device power state D3hot, through the _PR3 object,
but they do not provide a list of power resources for device power
state D0.
Among other things, this causes acpi_device_get_power() to return
D3hot as the current state of the device in question if all of the
D3hot power resources are "on", because it sees the power_resources
flag set and calls acpi_power_get_inferred_state() which finds that
D3hot is the shallowest power state with all of the associated power
resources turned "on", so that's what it returns. Moreover, that
value takes precedence over the acpi_dev_pm_explicit_get() return
value, because it means a deeper power state. The device may very
well be in D0 physically at that point, however.
Moreover, the presence of _PR3 without _PR0 for a given device
means that only one D3-level power state can be supported by it.
Namely, because there are no power resources to turn "off" when
transitioning the device from D0 into D3cold (which should be
supported since _PR3 is present), the evaluation of _PS3 should
be sufficient to put it straight into D3cold, but this means that
the effect of turning "on" the _PR3 power resources is unclear,
so it is better to avoid doing that altogether. Consequently,
there is no practical way do distinguish D3cold from D3hot for
the device in question and the power states of it can be labeled
so that D3hot is the deepest supported one (and Linux assumes
that putting a device into D3hot via ACPI may cause power to be
removed from it anyway, for legacy reasons).
To work around the problem described above modify the ACPI
enumeration of devices so that power resources are only used
for device power management if the list of D0 power resources
is not empty and make it mart D3cold as supported only if that
is the case and the D3hot list of power resources is not empty
too.
Fixes:
|
|
|
Hanjun Guo
|
ead7ba1362 |
ACPI: scan: Put SPCR and STAO table after using it
The SPCR and STAO table needs to be released after using it. Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Masahiro Yamada
|
45586c7078 |
treewide: remove redundant IS_ERR() before error code check
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Andy Shevchenko
|
cb0701acfa |
ACPI: platform: Unregister stale platform devices
When commit |
|
|
David Hildenbrand
|
7291edca20 |
drivers/acpi/scan.c: document why we don't need the device_hotplug_lock
Let's document why the lock is not needed in acpi_scan_init(), right now this is not really obvious. [akpm@linux-foundation.org: fix tpyo] Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Thomas Gleixner
|
457c899653 |
treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Linus Torvalds
|
cf482a49af |
Driver core/kobject patches for 5.2-rc1
Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said they
should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here, due
to some changes to the kobject core code. Those too have all been acked
by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHDbw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynDAgCfbb4LBR6I50wFXb8JM/R6cAS7qrsAn1unshKV
8XCYcif2RxjtdJWXbjdm
=/rLh
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core/kobject updates from Greg KH:
"Here is the "big" set of driver core patches for 5.2-rc1
There are a number of ACPI patches in here as well, as Rafael said
they should go through this tree due to the driver core changes they
required. They have all been acked by the ACPI developers.
There are also a number of small subsystem-specific changes in here,
due to some changes to the kobject core code. Those too have all been
acked by the various subsystem maintainers.
As for content, it's pretty boring outside of the ACPI changes:
- spdx cleanups
- kobject documentation updates
- default attribute groups for kobjects
- other minor kobject/driver core fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
kobject: clean up the kobject add documentation a bit more
kobject: Fix kernel-doc comment first line
kobject: Remove docstring reference to kset
firmware_loader: Fix a typo ("syfs" -> "sysfs")
kobject: fix dereference before null check on kobj
Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
init/config: Do not select BUILD_BIN2C for IKCONFIG
Provide in-kernel headers to make extending kernel easier
kobject: Improve doc clarity kobject_init_and_add()
kobject: Improve docs for kobject_add/del
driver core: platform: Fix the usage of platform device name(pdev->name)
livepatch: Replace klp_ktype_patch's default_attrs with groups
cpufreq: schedutil: Replace default_attrs field with groups
padata: Replace padata_attr_type default_attrs field with groups
irqdesc: Replace irq_kobj_type's default_attrs field with groups
net-sysfs: Replace ktype default_attrs field with groups
block: Replace all ktype default_attrs with groups
samples/kobject: Replace foo_ktype's default_attrs field with groups
kobject: Add support for default attribute groups to kobj_type
driver core: Postpone DMA tear-down until after devres release for probe failure
...
|
|
|
Rafael J. Wysocki
|
91751459ec |
Merge branches 'acpi-scan', 'acpi-tables', 'acpi-misc' and 'acpi-pm'
* acpi-scan: ACPI / scan: Add labels for PNP button devices ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package() * acpi-tables: ACPI / tables: Clean up whitespace * acpi-misc: ACPI / DPTF: Use dev_get_drvdata() ACPI: event: replace strcpy() by strscpy() ACPI: Fix comment typos * acpi-pm: ACPI: PM: Print debug messages when enabling GPEs for wakeup |
|
|
Bob Moore
|
5599fb6935 |
ACPICA: Rename nameseg compare macro for clarity
ACPICA commit 92ec0935f27e217dff0b176fca02c2ec3d782bb5 ACPI_COMPARE_NAME changed to ACPI_COMPARE_NAMESEG This clarifies (1) this is a compare on 4-byte namesegs, not a generic compare. Improves understanding of the code. Link: https://github.com/acpica/acpica/commit/92ec0935 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Keith Busch
|
60574d1e05 |
acpi: Create subtable parsing infrastructure
Parsing entries in an ACPI table had assumed a generic header structure. There is no standard ACPI header, though, so less common layouts with different field sizes required custom parsers to go through their subtable entry list. Create the infrastructure for adding different table types so parsing the entries array may be more reused for all ACPI system tables and the common code doesn't need to be duplicated. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Bjorn Helgaas
|
5ceb5f0522 |
ACPI / scan: Add labels for PNP button devices
Subsequent code treats button_device_ids[] entries differently, and it's hard to follow without a hint as to which is which. Add comments to identify the power button, lid, and sleep button devices. The "PNP" prefix is owned by Microsoft, so they distribute the canonical list of "PNP" IDs. Link: https://uefi.org/PNP_ACPI_Registry Link: https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/devids.txt Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Bjorn Helgaas
|
40381a3c1f |
ACPI / scan: Simplify acpi_bus_extract_wakeup_device_power_package()
acpi_bus_extract_wakeup_device_power_package() is a static function with a single caller that supplies (device->handle, &device->wakeup). Simplify the interface so the caller need only supply "device". This makes it obvious that "wakeup", i.e., &device->wakeup, can never be NULL, so remove the unnecessary check for that. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Bjorn Helgaas
|
603fadf336 |
ACPI: Fix comment typos
Fix some misspellings in comments. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Hans de Goede
|
96f984d312 |
ACPI / scan: Create platform device for BSG2150 ACPI nodes
The Point of View TAB-P1006W-232-3G tablet has an ACPI firmware node with
a HID of BSG2150 describing the 2 Bosch sensors used in the device a
BMC150 compatible accelerometer and a BMC150 compatible magnetometer.
The ACPI firmware node actually contains 3 I2cSerialBusV2 resources,
but this seems to be a copy and paste job from the BSG1160 firmware node
on other devices, since there is no i2c-client listening to the 0x68
address listed in the third resource and the 0x68 address is identical
to the address of the third resource in the BSG1160 nodes, where as the
other 2 addresses are different.
Add the ID to the I2C multi instantiate list, so that the
i2c-multi-instantiate.c driver can handle it;
And add the necessary info to the i2c-multi-instantiate.c driver to
enumerate all I2C slaves correctly.
To avoid triggering the:
if (i < multi->num_clients) {
dev_err(dev, "Error finding driver, idx %d\n", i);
Error this commit lists the 3th device in the i2c_inst_data with a
type of "bsg2150_dummy_dev".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
Linus Torvalds
|
af7ddd8a62 |
DMA mapping updates for Linux 4.21
A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for architectures
that have devices that perform DMA that is not cache coherent. Based
on the existing arm64 implementation and also used for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel data
leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script.
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlwctQgLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYMxgQ//dBpAfS4/J76CdAbYry2zqgcOUU9hIrD6NHiEMWov
ltJxyvEl3LsUmIdEj3aCrYL9jZN0qsnCzn5BVj2c3jDIVgD64fAr7HDf/PbEEfKb
j6/GgEnVLPZV+sQMvhNA5jOzHrkseaqPa4/pNLFZ/l8jnuZ2d+btusDWJpMoVDer
TXVwtIfgeIu0gTygYOShLYXd5qptWKWsZEpbTZOO2sE6+x+ZJX7yQYUxYDTlcOIj
JWVO2l5QNHPc5T9o2at+6L5aNUvnZOxT79sWgyZLn0Kc+FagKAVwfLqUEl0v7foG
8k/xca5/8p3afB1DfrIrtplJqis7cVgdyGxriwuuoO8X4F0nPyWwpGmxsBhrWwwl
xTqC4UorEJ7QwoP6Azopk/vYI2QXIUBLjuCJCuFXZj9+2BGf4IfvBY1S2cLM9qLs
HMcxQonuXJii044KEFS96ePEuiT+igVINweIFBKWcgNCEG0UQtyL6RQ1U5297ipF
JiWZAqD+p9X52UdKS+oKfAiZEekMXn6Xyo97+YCiNpfOo0GP5eEcwhL+JpY4AiRq
apPXtsRy2o1s8yfjdraUIM2Mc2n62vFKb35oUbGCd/QO9piPrFQHl6T0HHcHk4YR
XrUXcHieFZBCYqh7ZVa4RL8Msq1wvGuTL4Dxl43mXdsMoUFRR6eSNWLoAV4IpOLZ
WgA=
=in72
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping
Pull DMA mapping updates from Christoph Hellwig:
"A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for
architectures that have devices that perform DMA that is not cache
coherent. Based on the existing arm64 implementation and also used
for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel
data leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script"
* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
dma-mapping: fix inverted logic in dma_supported
dma-mapping: deprecate dma_zalloc_coherent
dma-mapping: zero memory returned from dma_alloc_*
sparc/iommu: fix ->map_sg return value
sparc/io-unit: fix ->map_sg return value
arm64: default to the direct mapping in get_arch_dma_ops
PCI: Remove unused attr variable in pci_dma_configure
ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
dma-mapping: bypass indirect calls for dma-direct
vmd: use the proper dma_* APIs instead of direct methods calls
dma-direct: merge swiotlb_dma_ops into the dma_direct code
dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
dma-direct: improve addressability error reporting
swiotlb: remove dma_mark_clean
swiotlb: remove SWIOTLB_MAP_ERROR
ACPI / scan: Refactor _CCA enforcement
dma-mapping: factor out dummy DMA ops
dma-mapping: always build the direct mapping code
dma-mapping: move dma_cache_sync out of line
dma-mapping: move various slow path functions out of line
...
|
|
|
Robin Murphy
|
e5361ca29f |
ACPI / scan: Refactor _CCA enforcement
Rather than checking the DMA attribute at each callsite, just pass it through for acpi_dma_configure() to handle directly. That can then deal with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly installing dummy DMA ops instead of just skipping setup entirely. This will then free up the dev->dma_ops == NULL case for some valuable fastpath optimisations. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Tony Luck <tony.luck@intel.com> |
|
|
Andy Shevchenko
|
a3dd034a17 |
ACPI / scan: Create platform device for INT3515 ACPI nodes
The ACPI device with INT3515 _HID is representing a complex USB PD hardware infrastructure which includes several I2C slave ICs. We add an ID to the I2C multi instantiate list to enumerate all I2C slaves correctly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
58a0228707 |
ACPI updates for 4.20-rc1
- Fix ACPICA issues related to the handling of module-level AML
and make the ACPI initialization code parse ECDT before loading
the definition block tables (Erik Schmauss).
- Update ACPICA to upstream revision 20181003 including fixes
related to the ill-defined "generic serial bus" and the handling
of the _REG object (Bob Moore).
- Fix some issues with system-wide suspend/resume on Intel BYT/CHT
related to the handling of I2C controllers in the ACPI LPSS driver
for Intel SoCs (Hans de Goede).
- Modify the ACPI namespace scanning code to enumerate INT33FE HID
devices as platform devices with I2C resources to avoid device
enumeration problems on boards with Dollar Cove or Whiskey Cove
Intel PMICs (Hans de Goede).
- Prevent ACPICA from using ktime_get() during early resume from
system-wide suspend before resuming the timekeeping which generally
is unsafe and triggers a warning from the timekeeping code (Bart
Van Assche).
- Add low-level real time clock support to the ACPI Time and Aalarm
Device (TAD) driver (Rafael Wysocki).
- Fix the ACPI SBS driver to avoid GPE storms on MacBook Pro and
Oopses when removing modules (Ronald Tschalär).
- Fix the ACPI PPTT parsing code to handle architecturally unknown
cache types properly (Jeffrey Hugo).
- Fix initialization issue in the ACPI processor driver (Dou Liyang).
- Clean up the code in several places (Andy Shevchenko, Bartlomiej
Zolnierkiewicz, David Arcari, zhong jiang).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=arbR
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix ACPICA issues related to the handling of module-level AML,
fix an ordering issue during ACPI initialization, update ACPICA to
upstream revision 20181003 (including fixes mostly), fix issues with
system-wide suspend/resume related to the ACPI driver for Intel SoCs
(LPSS), fix device enumeration issues on boards with Dollar Cove or
Whiskey Cove Intel PMICs, prevent ACPICA from calling ktime_get() in
unsuitable conditions, update a few drivers and clean up some code in
several places.
Specifics:
- Fix ACPICA issues related to the handling of module-level AML and
make the ACPI initialization code parse ECDT before loading the
definition block tables (Erik Schmauss).
- Update ACPICA to upstream revision 20181003 including fixes related
to the ill-defined "generic serial bus" and the handling of the
_REG object (Bob Moore).
- Fix some issues with system-wide suspend/resume on Intel BYT/CHT
related to the handling of I2C controllers in the ACPI LPSS driver
for Intel SoCs (Hans de Goede).
- Modify the ACPI namespace scanning code to enumerate INT33FE HID
devices as platform devices with I2C resources to avoid device
enumeration problems on boards with Dollar Cove or Whiskey Cove
Intel PMICs (Hans de Goede).
- Prevent ACPICA from using ktime_get() during early resume from
system-wide suspend before resuming the timekeeping which generally
is unsafe and triggers a warning from the timekeeping code (Bart
Van Assche).
- Add low-level real time clock support to the ACPI Time and Aalarm
Device (TAD) driver (Rafael Wysocki).
- Fix the ACPI SBS driver to avoid GPE storms on MacBook Pro and
Oopses when removing modules (Ronald Tschalär).
- Fix the ACPI PPTT parsing code to handle architecturally unknown
cache types properly (Jeffrey Hugo).
- Fix initialization issue in the ACPI processor driver (Dou Liyang).
- Clean up the code in several places (Andy Shevchenko, Bartlomiej
Zolnierkiewicz, David Arcari, zhong jiang)"
* tag 'acpi-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (33 commits)
ACPI / scan: Create platform device for INT33FE ACPI nodes
ACPI / OSL: Use 'jiffies' as the time bassis for acpi_os_get_timer()
ACPI: probe ECDT before loading AML tables regardless of module-level code flag
ACPICA: Remove acpi_gbl_group_module_level_code and only use acpi_gbl_execute_tables_as_methods instead
ACPICA: AML Parser: fix parse loop to correctly skip erroneous extended opcodes
ACPICA: AML interpreter: add region addresses in global list during initialization
ACPI: TAD: Add low-level support for real time capability
ACPI: remove redundant 'default n' from Kconfig
ACPI / SBS: Fix rare oops when removing modules
ACPI / SBS: Fix GPE storm on recent MacBookPro's
ACPI/PPTT: Handle architecturally unknown cache types
drivers: base: cacheinfo: Do not populate sysfs for unknown cache types
ACPICA: Update version to 20181003
ACPICA: Never run _REG on system_memory and system_IO
ACPICA: Split large interpreter file
ACPICA: Update for field unit access
ACPICA: Rename some of the Field Attribute defines
ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocol
ACPI / processor: Fix the return value of acpi_processor_ids_walk()
ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq
...
|
|
|
Hans de Goede
|
589edb56b4 |
ACPI / scan: Create platform device for INT33FE ACPI nodes
Bay and Cherry Trail devices with a Dollar Cove or Whiskey Cove PMIC have an ACPI node with a HID of INT33FE which is a "virtual" battery device implementing a standard ACPI battery interface which depends upon a proprietary, undocument OpRegion called BMOP. Since we do have docs for the actual fuel-gauges used on these boards we instead use native fuel-gauge drivers talking directly to the fuel-gauge ICs on boards which rely on this INT33FE device for their battery monitoring. On boards with a Dollar Cove PMIC the INT33FE device's resources (_CRS) describe a non-existing I2C client at address 0x6b with a bus-speed of 100KHz. This is a problem on some boards since there are actual devices on that same bus which need a speed of 400KHz to function properly. This commit adds the INT33FE HID to the list of devices with I2C resources which should be enumerated as a platform-device rather then letting the i2c-core instantiate an i2c-client matching the first I2C resource, so that its bus-speed will not influence the max speed of the I2C bus. This fixes e.g. the touchscreen not working on the Teclast X98 II Plus. The INT33FE device on boards with a Whiskey Cove PMIC is somewhat special. Its first I2C resource is for a secondary I2C address of the PMIC itself, which is already described in an ACPI device with an INT34D3 HID. But it has 3 more I2C resources describing 3 other chips for which we do need to instantiate I2C clients and which need device-connections added between them for things to work properly. This special case is handled by the drivers/platform/x86/intel_cht_int33fe.c code. Before this commit that code was binding to the i2c-client instantiated for the secondary I2C address of the PMIC, since we now instantiate a platform device for the INT33FE device instead, this commit also changes the intel_cht_int33fe driver from an i2c driver to a platform driver. This also brings the intel_cht_int33fe drv inline with how we instantiate multiple i2c clients from a single ACPI device in other cases, as done by the drivers/platform/x86/i2c-multi-instantiate.c code. Reported-and-tested-by: Alexander Meiler <alex.meiler@protonmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Christoph Hellwig
|
dc3c05504d |
dma-mapping: remove dma_deconfigure
This goes through a lot of hooks just to call arch_teardown_dma_ops. Replace it with a direct call instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> |
|
|
Hans de Goede
|
aba941392a |
ACPI / scan: Create platform device for fwnodes with multiple i2c devices
Some devices have multiple I2cSerialBus resources and for things to work an i2c-client must be instantiated for each, each with its own i2c_device_id. Normally we only instantiate an i2c-client for the first resource, using the ACPI HID as id. This commit adds a list of HIDs of devices, which need multiple i2c-clients instantiated from a single fwnode, to acpi_device_enumeration_by_parent and makes acpi_device_enumeration_by_parent return false for these devices so that a platform device will be instantiated. This allows the drivers/platform/x86/i2c-multi-instantiate.c driver, which knows which i2c_device_id to use for each resource, to bind to the fwnode and initiate an i2c-client for each resource. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Hans de Goede
|
5971b0c159 |
ACPI / scan: Initialize status to ACPI_STA_DEFAULT
Since commit
|
|
|
John Garry
|
a6f0729508 |
ACPI / scan: Add static attribute to indirect_io_hosts[]
Array indirect_io_hosts[] is declared in acpi_is_indirect_io_slave() as a const array, which means that the array will be re-built for each call. Optimise by adding the static attribute, which means that the array is added to const-data pool and not re-built per function call. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Mika Westerberg
|
cc6a0e315a |
ACPI / scan: Initialize watchdog before PNP
At least on one Dell system the PNP motherboard resources device includes resources used by WDAT table. Since PNP gets initialized before WDAT it results following error and no watchdog: platform wdat_wdt: failed to claim resource 3: [io 0x046a-0x046c] ACPI: watchdog: Device creation failed: -16 Now, the PNP system driver is already accustomed with the situation that it cannot reserve all those motherboard resources because drivers using those might have reserved them already. In addition putting WDAT table resources under motherboard resources device makes sense in general. Fix this by initializing WDAT right before PNP. This allows WDAT to reserve all its resources and still keeps PNP system driver happy. Reported-by: Shubhrata.Priyadarsh@dell.com Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
3c0d551e02 |
pci-v4.17-changes
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlrHeY8UHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vxhLRAAndV/0NDyWZU0eZNM6twri2SEFnF7 E4ar+YthxDxxJG4TLJbIA12jc5NgHZy4WuttDa6Jb99KreBXIHJFlNi/V/tme6zf +yXUuxWae7wJzBiaay57VqLGSc80gt/LTgjLa1siwQqjTbO3wSXR6JJXNaE9FtQ4 /jL61t8bD1Peb5cWTpt9p0hrnKI0/pHwASdReyFS4F/HDKdvpof7BxE/OU3HSxxA XKC2v6RjY4S93vkzvApDXQ+vhKquVRK7/ojyTXQUO/GIzcARprO7H4k62N4ar0x/ qbXLkR8IMkwA8ecsNmcL92ftb/cXoHfd+wdK8WpijqzF4kW4SdteVWbIhUzI0gbr 0gjDYIzjplvH3pZGv/qvx+8sFtAP95OdPjuAAW2qJ9TCVfmiS8naNFCvcxg87RhD gjyQD3If1X7F8wy309lhq7VNyRexTHgIMgTXHyFvuZMzn/Qe1huL2XCwDcEAg/OX AvU2iuSE5tWAh7gIUMF/aWi3uoeJUyyoru5ZR//gqdFfx9YxpSimO1UDXnpPi8SR Iz/jzHJc0aWGYdQ9l6HiSbJF3P/QQcWYs9igt0A7BRGB05SPdWCh7sSO70FJa8ME f4WID5/qEiaH26kiSRX4cUqpc8Amk8bT0DXw2OT57qy3JM0ZdV5ENQX11pSpr9hv uLEf0DU7AEmdvzQ= =T++R -----END PGP SIGNATURE----- Merge tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ... |
|
|
John Garry
|
dfda449232 |
ACPI / scan: Do not enumerate Indirect IO host children
Through the logical PIO framework, systems which otherwise have no IO space access to legacy ISA/LPC devices may access these devices through so-called "indirect IO" method. In this, IO space accesses for non-PCI hosts are redirected to a host LLDD to manually generate the IO space (bus) accesses. Hosts are able to register a region in logical PIO space to map to its bus address range. Indirect IO child devices have an associated host-specific bus address. Special translation is required to map between a logical PIO address for a device and its host bus address. Since in the ACPI tables the child device IO resources would be the host-specific values, it is required the ACPI scan code should not enumerate these devices, and that this should be the responsibility of the host driver so that it can "fixup" the resources so that they map to the appropriate logical PIO addresses. To avoid enumerating these child devices, add a check from acpi_device_enumeration_by_parent() as to whether the parent for a device is a member of a known list of "indirect IO" hosts. For now, the HiSilicon LPC host controller ID is added. Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
John Garry
|
d87fb0917a |
ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
Currently the ACPI scan has special handling for serial bus slaves, in that it makes it the responsibility of the slave device's parent to enumerate the device. To support other types of slave devices which require the same special handling but where the bus is not strictly a serial bus, such as devices on the HiSilicon LPC controller bus, rename acpi_is_serial_bus_slave() to acpi_device_enumeration_by_parent(), so that the name can fit the wider purpose. Also rename the associated device flag acpi_device_flags.serial_bus_slave to .enumeration_by_parent. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lee, Chun-Yi
|
27664c5818 |
ACPI / scan: Send change uevent with offine environmental data
In current design of ACPI container offline, Kernel emits
KOBJ_CHANGE uevent to user space to indidate that the ejection of
the container was triggered by platform. (
|
|
|
Hans de Goede
|
63347db0af |
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
The acpi_get_bus_status wrapper for acpi_bus_get_status_handle has some
code to handle certain device quirks, in some cases we also need this
quirk handling for the initial _STA call.
Specifically on some devices calling _STA before all _DEP dependencies
are met results in errors like these:
[ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c)
[GenericSerialBus] (20170831/evregion-166)
[ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.123618] ACPI Error: Method parse/execution failed
\_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550)
acpi_get_bus_status already has code to avoid this, so by using it we
also silence these errors from the initial _STA call.
Note that in order for the acpi_get_bus_status handling for this to work,
we initialize dep_unmet to 1 until acpi_device_dep_initialize gets called,
this means that battery devices will be instantiated with an initial
status of 0. This is not a problem, acpi_bus_attach will get called soon
after the instantiation anyways and it will update the status as first
point of order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
Rafael J. Wysocki
|
b6c7026872 |
Merge branch 'acpi-ec' into acpi
* acpi-ec: ACPI / EC: Fix regression related to PM ops support in ECDT device |
|
|
Lv Zheng
|
a64a62ce9a |
ACPI / EC: Fix regression related to PM ops support in ECDT device
On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: |
|
|
Linus Torvalds
|
fb0255fb29 |
TTY/Serial patches for 4.15-rc1
Here is the big tty/serial driver pull request for 4.15-rc1.
Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat a
bit.
Nothing major, with no realy functional changes except better hardware
support for some platforms.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnD+w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynAmgCfSSr/9qiCE0vfP5eVYjddzxfWyZ4AoMbKORZC
5x2KVW0Btrbs3WmnD7ZU
=PSea
-----END PGP SIGNATURE-----
Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big tty/serial driver pull request for 4.15-rc1.
Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat
a bit.
Nothing major, with no realy functional changes except better hardware
support for some platforms.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
tty: ehv_bytechan: fix spelling mistake
tty: serial: meson: allow baud-rates lower than 9600
serial: 8250_fintek: Fix crash with baud rate B0
serial: 8250_fintek: Disable delays for ports != 0
serial: 8250_fintek: Return -EINVAL on invalid configuration
tty: Remove redundant license text
tty: serdev: Remove redundant license text
tty: hvc: Remove redundant license text
tty: serial: Remove redundant license text
tty: add SPDX identifiers to all remaining files in drivers/tty/
tty: serial: jsm: remove redundant pointer ts
tty: serial: jsm: add space before the open parenthesis '('
tty: serial: jsm: fix coding style
tty: serial: jsm: delete space between function name and '('
tty: serial: jsm: add blank line after declarations
tty: serial: jsm: change the type of local variable
tty: serial: imx: remove dead code imx_dma_rxint
tty: serial: imx: disable ageing timer interrupt if dma in use
serial: 8250: fix potential deadlock in rs485-mode
serial: m32r_sio: Drop redundant .data assignment
...
|
|
|
Frédéric Danis
|
e361d1f858 |
ACPI / scan: Fix enumeration for special UART devices
UART devices is expected to be enumerated by SerDev subsystem. During ACPI scan, serial devices behind SPI, I2C or UART buses are not enumerated, allowing them to be enumerated by their respective parents. Rename *spi_i2c_slave* to *serial_bus_slave* as this will be used for serial devices on serial buses (SPI, I2C or UART). On Macs an empty ResourceTemplate is returned for uart slaves. Instead the device properties "baud", "parity", "dataBits", "stopBits" are provided. Add a check for "baud" in acpi_is_serial_bus_slave(). Signed-off-by: Frédéric Danis <frederic.danis.oss@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Ronald Tschalär <ronald@innovation.ch> Tested-by: Peter Y. Chuang <peteryuchuang@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
|
|
Srinivas Pandruvada
|
eeb2d80d50 |
ACPI / LPIT: Add Low Power Idle Table (LPIT) support
Add functionality to read LPIT table, which provides: - Sysfs interface to read residency counters via /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us Here the count "low_power_idle_cpu_residency_us" shows the time spent by CPU package in low power state. This is read via MSR interface, which points to MSR for PKG C10. Here the count "low_power_idle_system_residency_us" show the count the system was in low power state. This is read via MMIO interface. This is mapped to SLP_S0 residency on modern Intel systems. This residency is achieved only when CPU is in PKG C10 and all functional blocks are in low power state. It is possible that none of the above counters present or anyone of the counter present or all counters present. For example: On my Kabylake system both of the above counters present. After suspend to idle these counts updated and prints: 6916179 6998564 This counter can be read by tools like turbostat to display. Or it can be used to debug, if modern systems are reaching desired low power state. - Provides an interface to read residency counter memory address This address can be used to get the base address of PMC memory mapped IO. This is utilized by intel_pmc_core driver to print more debug information. In addition, to avoid code duplication to read iomem, removed the read of iomem from acpi_os_read_memory() in osl.c and made a common function acpi_os_read_iomem(). This new function is used for reading iomem in in both osl.c and acpi_lpit.c. Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
e7d0c41ecc |
Device properties framework updates for v4.14-rc1
- Introduce fwnode operations for all of the separate types of
"firmware nodes" that can be handled by the device properties
framework and drop the type field from struct fwnode_handle
(Sakari Ailus, Arnd Bergmann).
- Make the device properties framework use const fwnode arguments
where possible (Sakari Ailus).
- Add a helper for the consolidated handling of node references
to the device properties framework (Sakari Ailus).
- Switch over the ACPI part of the device properties framework
to the new UUID API (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=0rnk
-----END PGP SIGNATURE-----
Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These introduce fwnode operations for all of the separate types of
'firmware nodes' that can be handled by the device properties
framework, make the framework use const fwnode arguments all over, add
a helper for the consolidated handling of node references and switch
over the framework to the new UUID API.
Specifics:
- Introduce fwnode operations for all of the separate types of
'firmware nodes' that can be handled by the device properties
framework and drop the type field from struct fwnode_handle (Sakari
Ailus, Arnd Bergmann).
- Make the device properties framework use const fwnode arguments
where possible (Sakari Ailus).
- Add a helper for the consolidated handling of node references to
the device properties framework (Sakari Ailus).
- Switch over the ACPI part of the device properties framework to the
new UUID API (Andy Shevchenko)"
* tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: device property: Switch to use new generic UUID API
device property: export irqchip_fwnode_ops
device property: Introduce fwnode_property_get_reference_args
device property: Constify fwnode property API
device property: Constify argument to pset fwnode backend
ACPI: Constify internal fwnode arguments
ACPI: Constify acpi_bus helper functions, switch to macros
ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument
device property: Get rid of struct fwnode_handle type field
ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()
|
|
|
Rafael J. Wysocki
|
01d2f105a4 |
Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple'
* acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks |
|
|
Rafael J. Wysocki
|
f928a49027 |
Merge branches 'acpi-ec', 'acpi-dma', 'acpi-processor' and 'acpi-cppc'
* acpi-ec: ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order * acpi-dma: ACPI/IORT: Add IORT named component memory address limits ACPI: Make acpi_dma_configure() DMA regions aware ACPI: Introduce DMA ranges parsing ACPI: Make acpi_dev_get_resources() method agnostic * acpi-processor: ACPI / processor: make function acpi_processor_check_duplicates() static ACPI: processor: use dev_dbg() instead of dev_warn() when CPPC probe failed * acpi-cppc: mailbox: pcc: Drop uninformative output during boot |
|
|
Rafael J. Wysocki
|
eb7f43c4ad |
ACPI / scan: Enable GPEs before scanning the namespace
On some systems the platform firmware expects GPEs to be enabled before the enumeration of devices and if that expectation is not met, the systems in question may not boot in some situations. For this reason, change the initialization ordering of the ACPI subsystem to make it enable GPEs before scanning the namespace for the first time in order to enumerate devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> |
|
|
Lv Zheng
|
98529b9272 |
ACPI: EC: Fix regression related to wrong ECDT initialization order
Commit |
|
|
Lorenzo Pieralisi
|
7ad4263980 |
ACPI: Make acpi_dma_configure() DMA regions aware
Current ACPI DMA configuration set-up device DMA capabilities through kernel defaults that do not take into account platform specific DMA configurations reported by firmware. By leveraging the ACPI acpi_dev_get_dma_resources() API, add code in acpi_dma_configure() to retrieve the DMA regions to correctly set-up PCI devices DMA parameters. Rework the ACPI IORT kernel API to make sure they can accommodate the DMA set-up required by firmware. By making PCI devices DMA set-up ACPI IORT specific, the kernel is shielded from unwanted regressions that could be triggered by parsing DMA resources on arches that were previously ignoring them (ie x86/ia64), leaving kernel behaviour unchanged on those arches. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lorenzo Pieralisi
|
c04ac679c6 |
ACPI: Introduce DMA ranges parsing
Some devices have limited addressing capabilities and cannot reference the whole memory address space while carrying out DMA operations (eg some devices with bus address bits range smaller than system bus - which prevents them from using bus addresses that are otherwise valid for the system). The ACPI _DMA object allows bus devices to define the DMA window that is actually addressable by devices that sit upstream the bus, therefore providing a means to parse and initialize the devices DMA masks and addressable DMA range size. By relying on the generic ACPI kernel layer to retrieve and parse resources, introduce ACPI core code to parse the _DMA object. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Lukas Wunner
|
ca9ef3ab68 |
ACPI / scan: Recognize Apple SPI and I2C slaves
SPI and I2C slaves are enumerated by their respective parents rather than the ACPI core. They are recognized by presence of _CRS resources, which however are missing on Macs. Check for presence of device properties instead. Reported-and-tested-by: Ronald Tschalär <ronald@innovation.ch> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Sakari Ailus
|
db3e50f323 |
device property: Get rid of struct fwnode_handle type field
Instead of relying on the struct fwnode_handle type field, define fwnode_operations structs for all separate types of fwnodes. To find out the type, compare to the ops field to relevant ops structs. This change has two benefits: 1. it avoids adding the type field to each and every instance of struct fwnode_handle, thus saving memory and 2. makes the ops field the single factor that defines both the types of the fwnode as well as defines the implementation of its operations, decreasing the possibility of bugs when developing code dealing with fwnode internals. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
|
|
Linus Torvalds
|
548aa0e3c5 |
Device properties framework updates for v4.13-rc1
- Rearrange the core device properties code by moving the code
specific to each supported platform configuration framework
(ACPI, DT and build-in) into a separate file (Sakari Ailus).
- Add helper functions for accessing device properties in a
firmware-agnostic way (Sakari Ailus, Kieran Bingham).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=EcrF
-----END PGP SIGNATURE-----
Merge tag 'devprop-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These mostly rearrange the device properties core code and add a few
helper functions to it as a foundation for future work.
Specifics:
- Rearrange the core device properties code by moving the code
specific to each supported platform configuration framework (ACPI,
DT and build-in) into a separate file (Sakari Ailus).
- Add helper functions for accessing device properties in a
firmware-agnostic way (Sakari Ailus, Kieran Bingham)"
* tag 'devprop-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Add fwnode_graph_get_port_parent
device property: Add FW type agnostic fwnode_graph_get_remote_node
device property: Introduce fwnode_device_is_available()
device property: Move fwnode graph ops to firmware specific locations
device property: Move FW type specific functionality to FW specific files
ACPI: Constify argument to acpi_device_is_present()
|
|
|
Rafael J. Wysocki
|
f19e80b394 |
Merge branches 'acpi-spcr', 'acpi-osi', 'acpi-bus', 'acpi-scan' and 'acpi-misc'
* acpi-spcr: ACPI: SPCR: Workaround for APM X-Gene 8250 UART 32-alignment errata ACPI: SPCR: Use access width to determine mmio usage * acpi-osi: ACPI / osi: Make local function acpi_osi_dmi_linux() static * acpi-bus: ACPI / bus: handle ACPI hotplug schedule errors completely * acpi-scan: ACPI / scan: Indicate to platform when hot remove returns busy * acpi-misc: ACPI / DPTF: constify attribute_group structures ACPI / LPSS: constify attribute_group structures ACPI: BGRT: constify attribute_group structures ACPI / power: constify attribute_group structures |
|
|
Lee, Chun-Yi
|
d429e5c122 |
ACPI / scan: Indicate to platform when hot remove returns busy
In hotplug logic, it always indicates non-specific failure to platform through _OST when handing ACPI hot-remove event failed. Then platform terminates the hot-remove process but it can not identify the reason. Base on current hot-remove code, there have two situations that it returns busy: - OSPM try to offline an individual device, but the device offline function returns "busy". - When the ejection event is applied to an "not offlined yet" container. OSPM sends a kobject change event to userspace and returns "busy". Both of them will returns -EBUSY to ACPI device hotplug function. Then, the hotplug function indicates non-specific failure to platform just like for any other error, e.g. -ENODEV or -EIO. The benefit to the platform for identifying the OS "busy" state is that it can use a different approach to handle the "busy" instead of simply terminating the hot-remove operation for an unknown reason. For example, the platform can wait for a while and then re-trigger hot-remove. Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [ rjw: Changelog massage ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |