mirror of https://gitee.com/openkylin/linux.git
78 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Mel Gorman
|
d0164adc89 |
mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd
__GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Kirill A. Shutemov
|
9d2a8da006 |
radix-tree: replace preallocated node array with linked list
Currently we use per-cpu array to hold pointers to preallocated nodes. Let's replace it with linked list. On x86_64 it saves 256 bytes in per-cpu ELF section which may translate into freeing up 2MB of memory for NR_CPUS==8192. [akpm@linux-foundation.org: fix comment, coding style] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Frederic Weisbecker
|
92cf211874 |
sched/preempt: Merge preempt_mask.h into preempt.h
preempt_mask.h defines all the preempt_count semantics and related symbols: preempt, softirq, hardirq, nmi, preempt active, need resched, etc... preempt.h defines the accessors and mutators of preempt_count. But there is a messy dependency game around those two header files: * preempt_mask.h includes preempt.h in order to access preempt_count() * preempt_mask.h defines all preempt_count semantic and symbols except PREEMPT_NEED_RESCHED that is needed by asm/preempt.h Thus we need to define it from preempt.h, right before including asm/preempt.h, instead of defining it to preempt_mask.h with the other preempt_count symbols. Therefore the preempt_count semantics happen to be spread out. * We plan to introduce preempt_active_[enter,exit]() to consolidate preempt_schedule*() code. But we'll need to access both preempt_count mutators (preempt_count_add()) and preempt_count symbols (PREEMPT_ACTIVE, PREEMPT_OFFSET). The usual place to define preempt operations is in preempt.h but then we'll need symbols in preempt_mask.h which already includes preempt.h. So we end up with a ressource circle dependency. Lets merge preempt_mask.h into preempt.h to solve these dependency issues. This way we gather semantic symbols and operation definition of preempt_count in a single file. This is a dumb copy-paste merge. Further merge re-arrangments are performed in a subsequent patch to ease review. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1431441711-29753-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
|
|
Rasmus Villemoes
|
886d3dfa85 |
lib/radix-tree.c: change to simpler include
The comment helpfully explains why hardirq.h is included, but since
commit
|
|
|
Catalin Marinas
|
ce80b067de |
lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations
Since radix_tree_preload() stack trace is not always useful for debugging an actual radix tree memory leak, this patch updates the kmemleak allocation stack trace in the radix_tree_node_alloc() function. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Fabian Frederick
|
8e4c0b6848 |
lib/radix-tree.c: kernel-doc warning fix
index has been removed from __radix_tree_delete_node in
|
|
|
Christoph Lameter
|
7c8e0181e6 |
mm: replace __get_cpu_var uses with this_cpu_ptr
Replace places where __get_cpu_var() is used for an address calculation with this_cpu_ptr(). Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
449dd6984d |
mm: keep page cache radix tree nodes in check
Previously, page cache radix tree nodes were freed after reclaim emptied out their page pointers. But now reclaim stores shadow entries in their place, which are only reclaimed when the inodes themselves are reclaimed. This is problematic for bigger files that are still in use after they have a significant amount of their cache reclaimed, without any of those pages actually refaulting. The shadow entries will just sit there and waste memory. In the worst case, the shadow entries will accumulate until the machine runs out of memory. To get this under control, the VM will track radix tree nodes exclusively containing shadow entries on a per-NUMA node list. Per-NUMA rather than global because we expect the radix tree nodes themselves to be allocated node-locally and we want to reduce cross-node references of otherwise independent cache workloads. A simple shrinker will then reclaim these nodes on memory pressure. A few things need to be stored in the radix tree node to implement the shadow node LRU and allow tree deletions coming from the list: 1. There is no index available that would describe the reverse path from the node up to the tree root, which is needed to perform a deletion. To solve this, encode in each node its offset inside the parent. This can be stored in the unused upper bits of the same member that stores the node's height at no extra space cost. 2. The number of shadow entries needs to be counted in addition to the regular entries, to quickly detect when the node is ready to go to the shadow node LRU list. The current entry count is an unsigned int but the maximum number of entries is 64, so a shadow counter can easily be stored in the unused upper bits. 3. Tree modification needs tree lock and tree root, which are located in the address space, so store an address_space backpointer in the node. The parent pointer of the node is in a union with the 2-word rcu_head, so the backpointer comes at no extra cost as well. 4. The node needs to be linked to an LRU list, which requires a list head inside the node. This does increase the size of the node, but it does not change the number of objects that fit into a slab page. [akpm@linux-foundation.org: export the right function] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
139e561660 |
lib: radix_tree: tree node interface
Make struct radix_tree_node part of the public interface and provide API functions to create, look up, and delete whole nodes. Refactor the existing insert, look up, delete functions on top of these new node primitives. This will allow the VM to track and garbage collect page cache radix tree nodes. [sasha.levin@oracle.com: return correct error code on insertion failure] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
e7b563bb2a |
mm: filemap: move radix tree hole searching here
The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Johannes Weiner
|
53c59f262d |
lib: radix-tree: add radix_tree_delete_item()
Provide a function that does not just delete an entry at a given index, but also allows passing in an expected item. Delete only if that item is still located at the specified index. This is handy when lockless tree traversals want to delete entries as well because they don't have to do an second, locked lookup to verify the slot has not changed under them before deleting the entry. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Hugh Dickins
|
5f30fc94ca |
lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock
Running fsx on tmpfs with concurrent memhog-swapoff-swapon, lots of
BUG: sleeping function called from invalid context at kernel/fork.c:606
in_atomic(): 0, irqs_disabled(): 0, pid: 1394, name: swapoff
1 lock held by swapoff/1394:
#0: (rcu_read_lock){.+.+.+}, at: [<ffffffff812520a1>] radix_tree_locate_item+0x1f/0x2b6
followed by
================================================
[ BUG: lock held when returning to user space! ]
3.14.0-rc1 #3 Not tainted
------------------------------------------------
swapoff/1394 is leaving the kernel with locks still held!
1 lock held by swapoff/1394:
#0: (rcu_read_lock){.+.+.+}, at: [<ffffffff812520a1>] radix_tree_locate_item+0x1f/0x2b6
after which the system recovered nicely.
Whoops, I long ago forgot the rcu_read_unlock() on one unlikely branch.
Fixes
|
|
|
Jan Kara
|
5e4c0d9741 |
lib/radix-tree.c: make radix_tree_node_alloc() work correctly within interrupt
With users of radix_tree_preload() run from interrupt (block/blk-ioc.c is
one such possible user), the following race can happen:
radix_tree_preload()
...
radix_tree_insert()
radix_tree_node_alloc()
if (rtp->nr) {
ret = rtp->nodes[rtp->nr - 1];
<interrupt>
...
radix_tree_preload()
...
radix_tree_insert()
radix_tree_node_alloc()
if (rtp->nr) {
ret = rtp->nodes[rtp->nr - 1];
And we give out one radix tree node twice. That clearly results in radix
tree corruption with different results (usually OOPS) depending on which
two users of radix tree race.
We fix the problem by making radix_tree_node_alloc() always allocate fresh
radix tree nodes when in interrupt. Using preloading when in interrupt
doesn't make sense since all the allocations have to be atomic anyway and
we cannot steal nodes from process-context users because some users rely
on radix_tree_insert() succeeding after radix_tree_preload().
in_interrupt() check is somewhat ugly but we cannot simply key off passed
gfp_mask as that is acquired from root_gfp_mask() and thus the same for
all preload users.
Another part of the fix is to avoid node preallocation in
radix_tree_preload() when passed gfp_mask doesn't allow waiting. Again,
preallocation in such case doesn't make sense and when preallocation would
happen in interrupt we could possibly leak some allocated nodes. However,
some users of radix_tree_preload() require following radix_tree_insert()
to succeed. To avoid unexpected effects for these users,
radix_tree_preload() only warns if passed gfp mask doesn't allow waiting
and we provide a new function radix_tree_maybe_preload() for those users
which get different gfp mask from different call sites and which are
prepared to handle radix_tree_insert() failure.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Konstantin Khlebnikov
|
fffaee365f |
radix-tree: fix contiguous iterator
This patch fixes bug in macro radix_tree_for_each_contig(). If radix_tree_next_slot() sees NULL in next slot it returns NULL, but following radix_tree_next_chunk() switches iterating into next chunk. As result iterating becomes non-contiguous and breaks vfs "splice" and all its users. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Reported-and-bisected-by: Hans de Bruin <jmdebruin@xmsnet.nl> Reported-and-bisected-by: Ondrej Zary <linux@rainbow-software.org> Reported-bisected-and-tested-by: Toralf Förster <toralf.foerster@gmx.de> Link: https://lkml.org/lkml/2012/6/5/64 Cc: stable <stable@vger.kernel.org> # 3.4.x Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Nick Piggin
|
5536805292 |
radix-tree: fix preload vector size
We are not preallocating a sufficient number of nodes. Signed-off-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Konstantin Khlebnikov
|
cebbd29e1c |
radix-tree: rewrite gang lookup using iterator
Rewrite radix_tree_gang_lookup_* functions using the new radix-tree iterator. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Tested-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Konstantin Khlebnikov
|
78c1d78488 |
radix-tree: introduce bit-optimized iterator
A series of radix tree cleanups, and usage of them in the core pagecache
code.
Micro-benchmark:
lookup 14 slots (typical page-vector size)
in radix-tree there earch <step> slot filled and tagged
before/after - nsec per full scan through tree
* Intel Sandy Bridge i7-2620M 4Mb L3
New code always faster
* AMD Athlon 6000+ 2x1Mb L2, without L3
New code generally faster,
Minor degradation (marked with "*") for huge sparse trees
* i386 on Sandy Bridge
New code faster for common cases: tagged and dense trees.
Some degradations for non-tagged lookup on sparse trees.
Ideally, there might help __ffs() analog for searching first non-zero
long element in array, gcc sometimes cannot optimize this loop corretly.
Numbers:
CPU: Intel Sandy Bridge i7-2620M 4Mb L3
radix-tree with 1024 slots:
tagged lookup
step 1 before 7156 after 3613
step 2 before 5399 after 2696
step 3 before 4779 after 1928
step 4 before 4456 after 1429
step 5 before 4292 after 1213
step 6 before 4183 after 1052
step 7 before 4157 after 951
step 8 before 4016 after 812
step 9 before 3952 after 851
step 10 before 3937 after 732
step 11 before 4023 after 709
step 12 before 3872 after 657
step 13 before 3892 after 633
step 14 before 3720 after 591
step 15 before 3879 after 578
step 16 before 3561 after 513
normal lookup
step 1 before 4266 after 3301
step 2 before 2695 after 2129
step 3 before 2083 after 1712
step 4 before 1801 after 1534
step 5 before 1628 after 1313
step 6 before 1551 after 1263
step 7 before 1475 after 1185
step 8 before 1432 after 1167
step 9 before 1373 after 1092
step 10 before 1339 after 1134
step 11 before 1292 after 1056
step 12 before 1319 after 1030
step 13 before 1276 after 1004
step 14 before 1256 after 987
step 15 before 1228 after 992
step 16 before 1247 after 999
radix-tree with 1024*1024*128 slots:
tagged lookup
step 1 before 1086102841 after 674196409
step 2 before 816839155 after 498138306
step 7 before 599728907 after 240676762
step 15 before 555729253 after 185219677
step 63 before 606637748 after 128585664
step 64 before 608384432 after 102945089
step 65 before 596987114 after 123996019
step 128 before 304459225 after 56783056
step 256 before 158846855 after 31232481
step 512 before 86085652 after 18950595
step 12345 before 6517189 after 1674057
normal lookup
step 1 before 626064869 after 544418266
step 2 before 418809975 after 336321473
step 7 before 242303598 after 207755560
step 15 before 208380563 after 176496355
step 63 before 186854206 after 167283638
step 64 before 176188060 after 170143976
step 65 before 185139608 after 167487116
step 128 before 88181865 after 86913490
step 256 before 45733628 after 45143534
step 512 before 24506038 after 23859036
step 12345 before 2177425 after 2018662
* AMD Athlon 6000+ 2x1Mb L2, without L3
radix-tree with 1024 slots:
tag-lookup
step 1 before 8164 after 5379
step 2 before 5818 after 5581
step 3 before 4959 after 4213
step 4 before 4371 after 3386
step 5 before 4204 after 2997
step 6 before 4950 after 2744
step 7 before 4598 after 2480
step 8 before 4251 after 2288
step 9 before 4262 after 2243
step 10 before 4175 after 2131
step 11 before 3999 after 2024
step 12 before 3979 after 1994
step 13 before 3842 after 1929
step 14 before 3750 after 1810
step 15 before 3735 after 1810
step 16 before 3532 after 1660
normal-lookup
step 1 before 7875 after 5847
step 2 before 4808 after 4071
step 3 before 4073 after 3462
step 4 before 3677 after 3074
step 5 before 4308 after 2978
step 6 before 3911 after 3807
step 7 before 3635 after 3522
step 8 before 3313 after 3202
step 9 before 3280 after 3257
step 10 before 3166 after 3083
step 11 before 3066 after 3026
step 12 before 2985 after 2982
step 13 before 2925 after 2924
step 14 before 2834 after 2808
step 15 before 2805 after 2803
step 16 before 2647 after 2622
radix-tree with 1024*1024*128 slots:
tag-lookup
step 1 before 1288059720 after 951736580
step 2 before 961292300 after 884212140
step 7 before 768905140 after 547267580
step 15 before 771319480 after 456550640
step 63 before 504847640 after 242704304
step 64 before 392484800 after 177920786
step 65 before 491162160 after 246895264
step 128 before 208084064 after 97348392
step 256 before 112401035 after 51408126
step 512 before 75825834 after 29145070
step 12345 before 5603166 after 2847330
normal-lookup
step 1 before 1025677120 after 861375100
step 2 before 647220080 after 572258540
step 7 before 505518960 after 484041813
step 15 before 430483053 after 444815320 *
step 63 before 388113453 after 404250546 *
step 64 before 374154666 after 396027440 *
step 65 before 381423973 after 396704853 *
step 128 before 190078700 after 202619384 *
step 256 before 100886756 after 102829108 *
step 512 before 64074505 after 56158720
step 12345 before 4237289 after 4422299 *
* i686 on Sandy bridge
radix-tree with 1024 slots:
tagged lookup
step 1 before 7990 after 4019
step 2 before 5698 after 2897
step 3 before 5013 after 2475
step 4 before 4630 after 1721
step 5 before 4346 after 1759
step 6 before 4299 after 1556
step 7 before 4098 after 1513
step 8 before 4115 after 1222
step 9 before 3983 after 1390
step 10 before 4077 after 1207
step 11 before 3921 after 1231
step 12 before 3894 after 1116
step 13 before 3840 after 1147
step 14 before 3799 after 1090
step 15 before 3797 after 1059
step 16 before 3783 after 745
normal lookup
step 1 before 5103 after 3499
step 2 before 3299 after 2550
step 3 before 2489 after 2370
step 4 before 2034 after 2302 *
step 5 before 1846 after 2268 *
step 6 before 1752 after 2249 *
step 7 before 1679 after 2164 *
step 8 before 1627 after 2153 *
step 9 before 1542 after 2095 *
step 10 before 1479 after 2109 *
step 11 before 1469 after 2009 *
step 12 before 1445 after 2039 *
step 13 before 1411 after 2013 *
step 14 before 1374 after 2046 *
step 15 before 1340 after 1975 *
step 16 before 1331 after 2000 *
radix-tree with 1024*1024*128 slots:
tagged lookup
step 1 before 1225865377 after 667153553
step 2 before 842427423 after 471533007
step 7 before 609296153 after 276260116
step 15 before 544232060 after 226859105
step 63 before 519209199 after 141343043
step 64 before 588980279 after 141951339
step 65 before 521099710 after 138282060
step 128 before 298476778 after 83390628
step 256 before 149358342 after 43602609
step 512 before 76994713 after 22911077
step 12345 before
|
|
|
Paul Gortmaker
|
8bc3bcc93a |
lib: reduce the use of module.h wherever possible
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Fix up any implicit include dependencies that were being masked by module.h along the way. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> |
|
|
Hugh Dickins
|
e2bdb933ab |
radix_tree: take radix_tree_path off stack
Down, down in the deepest depths of GFP_NOIO page reclaim, we have shrink_page_list() calling __remove_mapping() calling __delete_from_ swap_cache() or __delete_from_page_cache(). You would not expect those to need much stack, but in fact they call radix_tree_delete(): which declares a 192-byte radix_tree_path array on its stack (to record the node,offsets it visits when descending, in case it needs to ascend to update them). And if any tag is still set [1], that calls radix_tree_tag_clear(), which declares a further such 192-byte radix_tree_path array on the stack. (At least we have interrupts disabled here, so won't then be pushing registers too.) That was probably a good choice when most users were 32-bit (array of half the size), and adding fields to radix_tree_node would have bloated it unnecessarily. But nowadays many are 64-bit, and each radix_tree_node contains a struct rcu_head, which is only used when freeing; whereas the radix_tree_path info is only used for updating the tree (deleting, clearing tags or setting tags if tagged) when a lock must be held, of no interest when accessing the tree locklessly. So add a parent pointer to the radix_tree_node, in union with the rcu_head, and remove all uses of the radix_tree_path. There would be space in that union to save the offset when descending as before (we can argue that a lock must already be held to exclude other users), but recalculating it when ascending is both easy (a constant shift and a constant mask) and uncommon, so it seems better just to do that. Two little optimizations: no need to decrement height when descending, adjusting shift is enough; and once radix_tree_tag_if_tagged() has set tag on a node and its ancestors, it need not ascend from that node again. perf on the radix tree test harness reports radix_tree_insert() as 2% slower (now having to set parent), but radix_tree_delete() 24% faster. Surely that's an exaggeration from rtth's artificially low map shift 3, but forcing it back to 6 still rates radix_tree_delete() 8% faster. [1] Can a pagecache tag (dirty, writeback or towrite) actually still be set at the time of radix_tree_delete()? Perhaps not if the filesystem is well-behaved. But although I've not tracked any stack overflow down to this cause, I have observed a curious case in which a dirty tag is set and left set on tmpfs: page migration's migrate_page_copy() happens to use __set_page_dirty_nobuffers() to set PageDirty on the newpage, and that sets PAGECACHE_TAG_DIRTY as a side-effect - harmless to a filesystem which doesn't use tags, except for this stack depth issue. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nai Xia <nai.xia@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Hugh Dickins
|
3fa36acbce |
radix_tree: clean away saw_unset_tag leftovers
radix_tree_tag_get()'s BUG (when it sees a tag after saw_unset_tag) was unsafe and removed in 2.6.34, but the pointless saw_unset_tag left behind. Remove it now, and return 0 as soon as we see unset tag - we already rely upon the root tag to be correct, returning 0 immediately if it's not set. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Hugh Dickins
|
e504f3fdd6 |
tmpfs radix_tree: locate_item to speed up swapoff
We have already acknowledged that swapoff of a tmpfs file is slower than it was before conversion to the generic radix_tree: a little slower there will be acceptable, if the hotter paths are faster. But it was a shock to find swapoff of a 500MB file 20 times slower on my laptop, taking 10 minutes; and at that rate it significantly slows down my testing. Now, most of that turned out to be overhead from PROVE_LOCKING and PROVE_RCU: without those it was only 4 times slower than before; and more realistic tests on other machines don't fare as badly. I've tried a number of things to improve it, including tagging the swap entries, then doing lookup by tag: I'd expected that to halve the time, but in practice it's erratic, and often counter-productive. The only change I've so far found to make a consistent improvement, is to short-circuit the way we go back and forth, gang lookup packing entries into the array supplied, then shmem scanning that array for the target entry. Scanning in place doubles the speed, so it's now only twice as slow as before (or three times slower when the PROVEs are on). So, add radix_tree_locate_item() as an expedient, once-off, single-caller hack to do the lookup directly in place. #ifdef it on CONFIG_SHMEM and CONFIG_SWAP, as much to document its limited applicability as save space in other configurations. And, sadly, #include sched.h for cond_resched(). Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Hugh Dickins
|
6328650bb4 |
radix_tree: exceptional entries and indices
A patchset to extend tmpfs to MAX_LFS_FILESIZE by abandoning its peculiar swap vector, instead keeping a file's swap entries in the same radix tree as its struct page pointers: thus saving memory, and simplifying its code and locking. This patch: The radix_tree is used by several subsystems for different purposes. A major use is to store the struct page pointers of a file's pagecache for memory management. But what if mm wanted to store something other than page pointers there too? The low bit of a radix_tree entry is already used to denote an indirect pointer, for internal use, and the unlikely radix_tree_deref_retry() case. Define the next bit as denoting an exceptional entry, and supply inline functions radix_tree_exception() to return non-0 in either unlikely case, and radix_tree_exceptional_entry() to return non-0 in the second case. If a subsystem already uses radix_tree with that bit set, no problem: it does not affect internal workings at all, but is defined for the convenience of those storing well-aligned pointers in the radix_tree. The radix_tree_gang_lookups have an implicit assumption that the caller can deduce the offset of each entry returned e.g. by the page->index of a struct page. But that may not be feasible for some kinds of item to be stored there. radix_tree_gang_lookup_slot() allow for an optional indices argument, output array in which to return those offsets. The same could be added to other radix_tree_gang_lookups, but for now keep it to the only one for which we need it. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Toshiyuki Okajima
|
ac15ee691f |
radix_tree: radix_tree_gang_lookup_tag_slot() may never return
Executed command: fsstress -d /mnt -n 600 -p 850 crash> bt PID: 7947 TASK: ffff880160546a70 CPU: 0 COMMAND: "fsstress" #0 [ffff8800dfc07d00] machine_kexec at ffffffff81030db9 #1 [ffff8800dfc07d70] crash_kexec at ffffffff810a7952 #2 [ffff8800dfc07e40] oops_end at ffffffff814aa7c8 #3 [ffff8800dfc07e70] die_nmi at ffffffff814aa969 #4 [ffff8800dfc07ea0] do_nmi_callback at ffffffff8102b07b #5 [ffff8800dfc07f10] do_nmi at ffffffff814aa514 #6 [ffff8800dfc07f50] nmi at ffffffff814a9d60 [exception RIP: __lookup_tag+100] RIP: ffffffff812274b4 RSP: ffff88016056b998 RFLAGS: 00000287 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000006 RDX: 000000000000001d RSI: ffff88016056bb18 RDI: ffff8800c85366e0 RBP: ffff88016056b9c8 R8: ffff88016056b9e8 R9: 0000000000000000 R10: 000000000000000e R11: ffff8800c8536908 R12: 0000000000000010 R13: 0000000000000040 R14: ffffffffffffffc0 R15: ffff8800c85366e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #7 [ffff88016056b998] __lookup_tag at ffffffff812274b4 #8 [ffff88016056b9d0] radix_tree_gang_lookup_tag_slot at ffffffff81227605 #9 [ffff88016056ba20] find_get_pages_tag at ffffffff810fc110 #10 [ffff88016056ba80] pagevec_lookup_tag at ffffffff81105e85 #11 [ffff88016056baa0] write_cache_pages at ffffffff81104c47 #12 [ffff88016056bbd0] generic_writepages at ffffffff81105014 #13 [ffff88016056bbe0] do_writepages at ffffffff81105055 #14 [ffff88016056bbf0] __filemap_fdatawrite_range at ffffffff810fb2cb #15 [ffff88016056bc40] filemap_write_and_wait_range at ffffffff810fb32a #16 [ffff88016056bc70] generic_file_direct_write at ffffffff810fb3dc #17 [ffff88016056bce0] __generic_file_aio_write at ffffffff810fcee5 #18 [ffff88016056bda0] generic_file_aio_write at ffffffff810fd085 #19 [ffff88016056bdf0] do_sync_write at ffffffff8114f9ea #20 [ffff88016056bf00] vfs_write at ffffffff8114fcf8 #21 [ffff88016056bf30] sys_write at ffffffff81150691 #22 [ffff88016056bf80] system_call_fastpath at ffffffff8100c0b2 I think this root cause is the following: radix_tree_range_tag_if_tagged() always tags the root tag with settag if the root tag is set with iftag even if there are no iftag tags in the specified range (Of course, there are some iftag tags outside the specified range). =============================================================================== [[[Detailed description]]] (1) Why cannot radix_tree_gang_lookup_tag_slot() return forever? __lookup_tag(): - Return with 0. - Return with the index which is not bigger than the old one as the input parameter. Therefore the following "while" repeats forever because the above conditions cause "ret" not to be updated and the cur_index cannot be changed into the bigger one. (So, radix_tree_gang_lookup_tag_slot() cannot return forever.) radix_tree_gang_lookup_tag_slot(): 1178 while (ret < max_items) { 1179 unsigned int slots_found; 1180 unsigned long next_index; /* Index of next search */ 1181 1182 if (cur_index > max_index) 1183 break; 1184 slots_found = __lookup_tag(node, results + ret, 1185 cur_index, max_items - ret, &next_index, tag); 1186 ret += slots_found; // cannot update ret because slots_found == 0. // so, this while loops forever. 1187 if (next_index == 0) 1188 break; 1189 cur_index = next_index; 1190 } (2) Why does __lookup_tag() return with 0 and doesn't update the index? Assuming the following: - the one of the slot in radix_tree_node is NULL. - the one of the tag which corresponds to the slot sets with PAGECACHE_TAG_TOWRITE or other. - In a certain height(!=0), the corresponding index is 0. a) __lookup_tag() notices that the tag is set. 1005 static unsigned int 1006 __lookup_tag(struct radix_tree_node *slot, void ***results, unsigned long index, 1007 unsigned int max_items, unsigned long *next_index, unsigned int tag) 1008 { 1009 unsigned int nr_found = 0; 1010 unsigned int shift, height; 1011 1012 height = slot->height; 1013 if (height == 0) 1014 goto out; 1015 shift = (height-1) * RADIX_TREE_MAP_SHIFT; 1016 1017 while (height > 0) { 1018 unsigned long i = (index >> shift) & RADIX_TREE_MAP_MASK ; 1019 1020 for (;;) { 1021 if (tag_get(slot, tag, i)) 1022 break; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ * the index is not updated yet. b) __lookup_tag() notices that the slot is NULL. 1023 index &= ~((1UL << shift) - 1); 1024 index += 1UL << shift; 1025 if (index == 0) 1026 goto out; /* 32-bit wraparound */ 1027 i++; 1028 if (i == RADIX_TREE_MAP_SIZE) 1029 goto out; 1030 } 1031 height--; 1032 if (height == 0) { /* Bottom level: grab some items */ ... 1055 } 1056 shift -= RADIX_TREE_MAP_SHIFT; 1057 slot = rcu_dereference_raw(slot->slots[i]); 1058 if (slot == NULL) 1059 break; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ c) __lookup_tag() doesn't update the index and return with 0. 1060 } 1061 out: 1062 *next_index = index; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1063 return nr_found; 1064 } (3) Why is the slot NULL even if the tag is set? Because radix_tree_range_tag_if_tagged() always sets the root tag with PAGECACHE_TAG_TOWRITE if the root tag is set with PAGECACHE_TAG_DIRTY, even if there is no tag which can be set with PAGECACHE_TAG_TOWRITE in the specified range (from *first_indexp to last_index). Of course, some PAGECACHE_TAG_DIRTY nodes must exist outside the specified range. (radix_tree_range_tag_if_tagged() is called only from tag_pages_for_writeback()) 640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root, 641 unsigned long *first_indexp, unsigned long last_index, 642 unsigned long nr_to_tag, 643 unsigned int iftag, unsigned int settag) 644 { 645 unsigned int height = root->height; 646 struct radix_tree_path path[height]; 647 struct radix_tree_path *pathp = path; 648 struct radix_tree_node *slot; 649 unsigned int shift; 650 unsigned long tagged = 0; 651 unsigned long index = *first_indexp; 652 653 last_index = min(last_index, radix_tree_maxindex(height)); 654 if (index > last_index) 655 return 0; 656 if (!nr_to_tag) 657 return 0; 658 if (!root_tag_get(root, iftag)) { 659 *first_indexp = last_index + 1; 660 return 0; 661 } 662 if (height == 0) { 663 *first_indexp = last_index + 1; 664 root_tag_set(root, settag); 665 return 1; 666 } ... 733 root_tag_set(root, settag); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 734 *first_indexp = index; 735 736 return tagged; 737 } As the result, there is no radix_tree_node which is set with PAGECACHE_TAG_TOWRITE but the root tag(radix_tree_root) is set with PAGECACHE_TAG_TOWRITE. [figure: inside radix_tree] (Please see the figure with typewriter font) =========================================== [roottag = DIRTY] | tag=0:NOTHING tag[0 0 0 1] 1:DIRTY [x x x +] 2:WRITEBACK | 3:DIRTY,WRITEBACK p 4:TOWRITE <---> 5:DIRTY,TOWRITE ... specified range (index: 0 to 2) * There is no DIRTY tag within the specified range. (But there is a DIRTY tag outside that range.) | | | | | | | | | after calling tag_pages_for_writeback() | | | | | | | | | v v v v v v v v v [roottag = DIRTY,TOWRITE] | p is "page". tag[0 0 0 1] x is NULL. [x x x +] +- is a pointer to "page". | p * But TOWRITE tag is set on the root tag. ============================================ After that, radix_tree_extend() via radix_tree_insert() is called when the page is added. This function sets the new radix_tree_node with PAGECACHE_TAG_TOWRITE to succeed the status of the root tag. 246 static int radix_tree_extend(struct radix_tree_root *root, unsigned long index) 247 { 248 struct radix_tree_node *node; 249 unsigned int height; 250 int tag; 251 252 /* Figure out what the height should be. */ 253 height = root->height + 1; 254 while (index > radix_tree_maxindex(height)) 255 height++; 256 257 if (root->rnode == NULL) { 258 root->height = height; 259 goto out; 260 } 261 262 do { 263 unsigned int newheight; 264 if (!(node = radix_tree_node_alloc(root))) 265 return -ENOMEM; 266 267 /* Increase the height. */ 268 node->slots[0] = radix_tree_indirect_to_ptr(root->rnode); 269 270 /* Propagate the aggregated tag info into the new root */ 271 for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) { 272 if (root_tag_get(root, tag)) 273 tag_set(node, tag, 0); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 274 } =========================================== [roottag = DIRTY,TOWRITE] | : tag[0 0 0 1] [0 0 0 0] [x x x +] [+ x x x] | | p p (new page) | | | | | | | | | after calling radix_tree_insert | | | | | | | | | v v v v v v v v v [roottag = DIRTY,TOWRITE] | tag [5 0 0 0] * DIRTY and TOWRITE tags are [+ + x x] succeeded to the new node. | | tag [0 0 0 1] [0 0 0 0] [x x x +] [+ x x x] | | p p ============================================ After that, the index 3 page is released by remove_from_page_cache(). Then we can make the situation that the tag is set with PAGECACHE_TAG_TOWRITE and that the slot which corresponds to the tag is NULL. =========================================== [roottag = DIRTY,TOWRITE] | tag [5 0 0 0] [+ + x x] | | tag [0 0 0 1] [0 0 0 0] [x x x +] [+ x x x] | | p p (remove) | | | | | | | | | after calling remove_page_cache | | | | | | | | | v v v v v v v v v [roottag = DIRTY,TOWRITE] | tag [4 0 0 0] * Only DIRTY tag is cleared [x + x x] because no TOWRITE tag is existed | in the bottom node. [0 0 0 0] [+ x x x] | p ============================================ To solve this problem Change to that radix_tree_tag_if_tagged() doesn't tag the root tag if it doesn't set any tags within the specified range. Like this. ============================================ 640 unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root, 641 unsigned long *first_indexp, unsigned long last_index, 642 unsigned long nr_to_tag, 643 unsigned int iftag, unsigned int settag) 644 { 650 unsigned long tagged = 0; ... 733 if (tagged) ^^^^^^^^^^^^^^^^^^^^^^^^ 734 root_tag_set(root, settag); 735 *first_indexp = index; 736 737 return tagged; 738 } ============================================ Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Nick Piggin
|
27d20fddc8 |
radix-tree: fix RCU bug
Salman Qazi describes the following radix-tree bug:
In the following case, we get can get a deadlock:
0. The radix tree contains two items, one has the index 0.
1. The reader (in this case find_get_pages) takes the rcu_read_lock.
2. The reader acquires slot(s) for item(s) including the index 0 item.
3. The non-zero index item is deleted, and as a consequence the other item is
moved to the root of the tree. The place where it used to be is queued for
deletion after the readers finish.
3b. The zero item is deleted, removing it from the direct slot, it remains in
the rcu-delayed indirect node.
4. The reader looks at the index 0 slot, and finds that the page has 0 ref
count
5. The reader looks at it again, hoping that the item will either be freed or
the ref count will increase. This never happens, as the slot it is looking
at will never be updated. Also, this slot can never be reclaimed because
the reader is holding rcu_read_lock and is in an infinite loop.
The fix is to re-use the same "indirect" pointer case that requires a slot
lookup retry into a general "retry the lookup" bit.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reported-by: Salman Qazi <sqazi@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Ingo Molnar
|
d4f8f217b8 | Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/rcu | |
|
Ingo Molnar
|
a6b9b4d50f | Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu into core/rcu | |
|
Linus Torvalds
|
9ee47476d6 |
Merge branch 'radix-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev
* 'radix-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev: radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tags radix-tree: clear all tags in radix_tree_node_rcu_free |
|
|
Dave Chinner
|
144dcfc012 |
radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tags
Commit |
|
|
Dave Chinner
|
b6dd08652e |
radix-tree: clear all tags in radix_tree_node_rcu_free
Commit
|
|
|
Jan Kara
|
d5ed3a4af7 |
lib/radix-tree.c: fix overflow in radix_tree_range_tag_if_tagged()
When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows index and tree traversal code goes astray reading memory until it hits unreadable memory. Check for overflow and exit in that case. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Arnd Bergmann
|
a1115570b3 |
radix-tree: __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Nick Piggin <npiggin@suse.de> Reviewed-by: Josh Triplett <josh@joshtriplett.org> |
|
|
Jan Kara
|
ebf8aa44be |
radix-tree: omplement function radix_tree_range_tag_if_tagged
Implement function for setting one tag if another tag is set for each item in given range. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Chris Mason <chris.mason@oracle.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Cesar Eduardo Barros
|
edcd1d843a |
radix-tree: fix radix_tree_prev_hole() underflow case
radix_tree_prev_hole() used LONG_MAX to detect underflow; however, ULONG_MAX is clearly what was intended, both here and by its only user (count_history_pages at mm/readahead.c). Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
David Howells
|
ce82653d6c |
radix_tree_tag_get() is not as safe as the docs make out [ver #2]
radix_tree_tag_get() is not safe to use concurrently with radix_tree_tag_set()
or radix_tree_tag_clear(). The problem is that the double tag_get() in
radix_tree_tag_get():
if (!tag_get(node, tag, offset))
saw_unset_tag = 1;
if (height == 1) {
int ret = tag_get(node, tag, offset);
may see the value change due to the action of set/clear. RCU is no protection
against this as no pointers are being changed, no nodes are being replaced
according to a COW protocol - set/clear alter the node directly.
The documentation in linux/radix-tree.h, however, says that
radix_tree_tag_get() is an exception to the rule that "any function modifying
the tree or tags (...) must exclude other modifications, and exclude any
functions reading the tree".
The problem is that the next statement in radix_tree_tag_get() checks that the
tag doesn't vary over time:
BUG_ON(ret && saw_unset_tag);
This has been seen happening in FS-Cache:
https://www.redhat.com/archives/linux-cachefs/2010-April/msg00013.html
To this end, remove the BUG_ON() from radix_tree_tag_get() and note in various
comments that the value of the tag may change whilst the RCU read lock is held,
and thus that the return value of radix_tree_tag_get() may not be relied upon
unless radix_tree_tag_set/clear() and radix_tree_delete() are excluded from
running concurrently with it.
Reported-by: Romain DEGEZ <romain.degez@smartjog.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
Tejun Heo
|
5a0e3ad6af |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
|
|
Paul E. McKenney
|
2676a58c98 |
radix-tree: Disable RCU lockdep checking in radix tree
Because the radix tree is used with many different locking designs, we cannot do any effective checking without changing the radix-tree APIs. It might make sense to do this later, but only if the RCU lockdep checking proves itself sufficiently valuable. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-10-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> |
|
|
David Howells
|
285e728b0a |
FS-Cache: Don't delete pending pages from the page-store tracking tree
Don't delete pending pages from the page-store tracking tree, but rather send them for another write as they've presumably been updated. Signed-off-by: David Howells <dhowells@redhat.com> |
|
|
David Howells
|
b34df792b4 |
FS-Cache: Use radix tree preload correctly in tracking of pages to be stored
__fscache_write_page() attempts to load the radix tree preallocation pool for the CPU it is on before calling radix_tree_insert(), as the insertion must be done inside a pair of spinlocks. Use of the preallocation pool, however, is contingent on the radix tree being initialised without __GFP_WAIT specified. __fscache_acquire_cookie() was passing GFP_NOFS to INIT_RADIX_TREE() - but that includes __GFP_WAIT. The solution is to AND out __GFP_WAIT. Additionally, the banner comment to radix_tree_preload() is altered to make note of this prerequisite. Possibly there should be a WARN_ON() too. Without this fix, I have seen the following recursive deadlock caused by radix_tree_insert() attempting to allocate memory inside the spinlocked region, which resulted in FS-Cache being called back into to release memory - which required the spinlock already held. ============================================= [ INFO: possible recursive locking detected ] 2.6.32-rc6-cachefs #24 --------------------------------------------- nfsiod/7916 is trying to acquire lock: (&cookie->lock){+.+.-.}, at: [<ffffffffa0076872>] __fscache_uncache_page+0xdb/0x160 [fscache] but task is already holding lock: (&cookie->lock){+.+.-.}, at: [<ffffffffa0076acc>] __fscache_write_page+0x15c/0x3f3 [fscache] other info that might help us debug this: 5 locks held by nfsiod/7916: #0: (nfsiod){+.+.+.}, at: [<ffffffff81048290>] worker_thread+0x19a/0x2e2 #1: (&task->u.tk_work#2){+.+.+.}, at: [<ffffffff81048290>] worker_thread+0x19a/0x2e2 #2: (&cookie->lock){+.+.-.}, at: [<ffffffffa0076acc>] __fscache_write_page+0x15c/0x3f3 [fscache] #3: (&object->lock#2){+.+.-.}, at: [<ffffffffa0076b07>] __fscache_write_page+0x197/0x3f3 [fscache] #4: (&cookie->stores_lock){+.+...}, at: [<ffffffffa0076b0f>] __fscache_write_page+0x19f/0x3f3 [fscache] stack backtrace: Pid: 7916, comm: nfsiod Not tainted 2.6.32-rc6-cachefs #24 Call Trace: [<ffffffff8105ac7f>] __lock_acquire+0x1649/0x16e3 [<ffffffff81059ded>] ? __lock_acquire+0x7b7/0x16e3 [<ffffffff8100e27d>] ? dump_trace+0x248/0x257 [<ffffffff8105ad70>] lock_acquire+0x57/0x6d [<ffffffffa0076872>] ? __fscache_uncache_page+0xdb/0x160 [fscache] [<ffffffff8135467c>] _spin_lock+0x2c/0x3b [<ffffffffa0076872>] ? __fscache_uncache_page+0xdb/0x160 [fscache] [<ffffffffa0076872>] __fscache_uncache_page+0xdb/0x160 [fscache] [<ffffffffa0077eb7>] ? __fscache_check_page_write+0x0/0x71 [fscache] [<ffffffffa00b4755>] nfs_fscache_release_page+0x86/0xc4 [nfs] [<ffffffffa00907f0>] nfs_release_page+0x3c/0x41 [nfs] [<ffffffff81087ffb>] try_to_release_page+0x32/0x3b [<ffffffff81092c2b>] shrink_page_list+0x316/0x4ac [<ffffffff81058a9b>] ? mark_held_locks+0x52/0x70 [<ffffffff8135451b>] ? _spin_unlock_irq+0x2b/0x31 [<ffffffff81093153>] shrink_inactive_list+0x392/0x67c [<ffffffff81058a9b>] ? mark_held_locks+0x52/0x70 [<ffffffff810934ca>] shrink_list+0x8d/0x8f [<ffffffff81093744>] shrink_zone+0x278/0x33c [<ffffffff81052c70>] ? ktime_get_ts+0xad/0xba [<ffffffff8109453b>] try_to_free_pages+0x22e/0x392 [<ffffffff8109184c>] ? isolate_pages_global+0x0/0x212 [<ffffffff8108e16b>] __alloc_pages_nodemask+0x3dc/0x5cf [<ffffffff810ae24a>] cache_alloc_refill+0x34d/0x6c1 [<ffffffff811bcf74>] ? radix_tree_node_alloc+0x52/0x5c [<ffffffff810ae929>] kmem_cache_alloc+0xb2/0x118 [<ffffffff811bcf74>] radix_tree_node_alloc+0x52/0x5c [<ffffffff811bcfd5>] radix_tree_insert+0x57/0x19c [<ffffffffa0076b53>] __fscache_write_page+0x1e3/0x3f3 [fscache] [<ffffffffa00b4248>] __nfs_readpage_to_fscache+0x58/0x11e [nfs] [<ffffffffa009bb77>] nfs_readpage_release+0x34/0x9b [nfs] [<ffffffffa009c0d9>] nfs_readpage_release_full+0x32/0x4b [nfs] [<ffffffffa0006cff>] rpc_release_calldata+0x12/0x14 [sunrpc] [<ffffffffa0006e2d>] rpc_free_task+0x59/0x61 [sunrpc] [<ffffffffa0006f03>] rpc_async_release+0x10/0x12 [sunrpc] [<ffffffff810482e5>] worker_thread+0x1ef/0x2e2 [<ffffffff81048290>] ? worker_thread+0x19a/0x2e2 [<ffffffff81352433>] ? thread_return+0x3e/0x101 [<ffffffffa0006ef3>] ? rpc_async_release+0x0/0x12 [sunrpc] [<ffffffff8104bff5>] ? autoremove_wake_function+0x0/0x34 [<ffffffff81058d25>] ? trace_hardirqs_on+0xd/0xf [<ffffffff810480f6>] ? worker_thread+0x0/0x2e2 [<ffffffff8104bd21>] kthread+0x7a/0x82 [<ffffffff8100beda>] child_rip+0xa/0x20 [<ffffffff8100b87c>] ? restore_args+0x0/0x30 [<ffffffff8104c2b9>] ? add_wait_queue+0x15/0x44 [<ffffffff8104bca7>] ? kthread+0x0/0x82 [<ffffffff8100bed0>] ? child_rip+0x0/0x20 Signed-off-by: David Howells <dhowells@redhat.com> |
|
|
Huang Shijie
|
b72b71c6cb |
lib: do code optimization for radix_tree_lookup() and radix_tree_lookup_slot()
radix_tree_lookup() and radix_tree_lookup_slot() have much the same code except for the return value. Introduce radix_tree_lookup_element() to do the real work. /* * is_slot == 1 : search for the slot. * is_slot == 0 : search for the node. */ static void * radix_tree_lookup_element(struct radix_tree_root *root, unsigned long index, int is_slot); Signed-off-by: Huang Shijie <shijie8@gmail.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Wu Fengguang
|
dc566127dd |
radix-tree: add radix_tree_prev_hole()
The counterpart of radix_tree_next_hole(). To be used by context readahead. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Vladislav Bolkhovitin <vst@vlnb.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Linus Torvalds
|
57c44c5f6f |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) trivial: chack -> check typo fix in main Makefile trivial: Add a space (and a comma) to a printk in 8250 driver trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx trivial: Fix misspelling of "firmware" in powerpc Makefile trivial: Fix misspelling of "firmware" in usb.c trivial: Fix misspelling of "firmware" in qla1280.c trivial: Fix misspelling of "firmware" in a100u2w.c trivial: Fix misspelling of "firmware" in megaraid.c trivial: Fix misspelling of "firmware" in ql4_mbx.c trivial: Fix misspelling of "firmware" in acpi_memhotplug.c trivial: Fix misspelling of "firmware" in ipw2100.c trivial: Fix misspelling of "firmware" in atmel.c trivial: Fix misspelled firmware in Kconfig trivial: fix an -> a typos in documentation and comments trivial: fix then -> than typos in comments and documentation trivial: update Jesper Juhl CREDITS entry with new email trivial: fix singal -> signal typo trivial: Fix incorrect use of "loose" in event.c trivial: printk: fix indentation of new_text_line declaration trivial: rtc-stk17ta8: fix sparse warning ... |
|
|
Harvey Harrison
|
8cef7d57a4 |
lib: radix_tree.c make percpu variable static
radix_tree_preloads is unused outside of this file, make it static. Noticed by sparse: lib/radix-tree.c:84:1: warning: symbol 'per_cpu__radix_tree_preloads' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Wu Fengguang
|
8e6bdb7f8b |
trivial: radix-tree: document wrap-around issue of radix_tree_next_hole()
And some 80-line cleanups. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
|
|
Alexey Dobriyan
|
51cc50685a |
SL*B: drop kmem cache argument from constructor
Kmem cache passed to constructor is only needed for constructors that are themselves multiplexeres. Nobody uses this "feature", nor does anybody uses passed kmem cache in non-trivial way, so pass only pointer to object. Non-trivial places are: arch/powerpc/mm/init_64.c arch/powerpc/mm/hugetlbpage.c This is flag day, yes. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Matt Mackall <mpm@selenic.com> [akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c] [akpm@linux-foundation.org: fix mm/slab.c] [akpm@linux-foundation.org: fix ubifs] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Nick Piggin
|
47feff2c8e |
radix-tree: add gang_lookup_slot, gang_lookup_slot_tag
Introduce gang_lookup_slot() and gang_lookup_slot_tag() functions, which are used by lockless pagecache. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Christoph Lameter
|
cde5353599 |
Christoph has moved
Remove all clameter@sgi.com addresses from the kernel tree since they will become invalid on June 27th. Change my maintainer email address for the slab allocators to cl@linux-foundation.org (which will be the new email address for the future). Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Nick Piggin
|
643b52b9c0 |
radix-tree: fix small lockless radix-tree bug
We shrink a radix tree when its root node has only one child, in the left most slot. The child becomes the new root node. To perform this operation in a manner compatible with concurrent lockless lookups, we atomically switch the root pointer from the parent to its child. However a concurrent lockless lookup may now have loaded a pointer to the parent (and is presently deciding what to do next). For this reason, we also have to keep the parent node in a valid state after shrinking the tree, until the next RCU grace period -- otherwise this lookup with the parent pointer may not do the right thing. Notably, we need to keep the child in the left most slot there in case that is requested by the lookup. This is all pretty standard RCU stuff. It is worth repeating because in my eagerness to obey the radix tree node constructor scheme, I had broken it by zeroing the radix tree node before the grace period. What could happen is that a lookup can load the parent pointer, then decide it wants to follow the left most child slot, only to find the slot contained NULL due to the concurrent shrinker having zeroed the parent node before waiting for a grace period. The lookup would return a false negative as a result. Fix it by doing that clearing in the RCU callback. I would normally want to rip out the constructor entirely, but radix tree nodes are one of those places where they make sense (only few cachelines will be touched soon after allocation). This was never actually found in any lockless pagecache testing or by the test harness, but by seeing the odd problem with my scalable vmap rewrite. I have not tickled the test harness into reproducing it yet, but I'll keep working at it. Fortunately, it is not a problem anywhere lockless pagecache is used in mainline kernels (pagecache probe is not a guarantee, and brd does not have concurrent lookups and deletes). Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Christoph Lameter
|
488514d179 |
Remove set_migrateflags()
Migrate flags must be set on slab creation as agreed upon when the antifrag logic was reviewed. Otherwise some slabs of a slabcache will end up in the unmovable and others in the reclaimable section depending on which flag was active when a new slab page was allocated. This likely slid in somehow when antifrag was merged. Remove it. The buffer_heads are always allocated with __GFP_RECLAIMABLE because the SLAB_RECLAIM_ACCOUNT option is set. The set_migrateflags() never had any effect there. Radix tree allocations are not directly reclaimable but they are allocated with __GFP_RECLAIMABLE set on each allocation. We now set SLAB_RECLAIM_ACCOUNT on radix tree slab creation making sure that radix tree slabs are consistently placed in the reclaimable section. Radix tree slabs will also be accounted as such. There is then no user left of set_migratepages. So remove it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Nick Piggin
|
e2848a0efe |
radix-tree: avoid atomic allocations for preloaded insertions
Most pagecache (and some other) radix tree insertions have the great opportunity to preallocate a few nodes with relaxed gfp flags. But the preallocation is squandered when it comes time to allocate a node, we default to first attempting a GFP_ATOMIC allocation -- that doesn't normally fail, but it can eat into atomic memory reserves that we don't need to be using. Another upshot of this is that it removes the sometimes highly contended zone->lock from underneath tree_lock. Pagecache insertions are always performed with a radix tree preload, and after this change, such a situation will never fall back to kmem_cache_alloc within radix_tree_node_alloc. David Miller reports seeing this allocation fail on a highly threaded sparc64 system: [527319.459981] dd: page allocation failure. order:0, mode:0x20 [527319.460403] Call Trace: [527319.460568] [00000000004b71e0] __slab_alloc+0x1b0/0x6a8 [527319.460636] [00000000004b7bbc] kmem_cache_alloc+0x4c/0xa8 [527319.460698] [000000000055309c] radix_tree_node_alloc+0x20/0x90 [527319.460763] [0000000000553238] radix_tree_insert+0x12c/0x260 [527319.460830] [0000000000495cd0] add_to_page_cache+0x38/0xb0 [527319.460893] [00000000004e4794] mpage_readpages+0x6c/0x134 [527319.460955] [000000000049c7fc] __do_page_cache_readahead+0x170/0x280 [527319.461028] [000000000049cc88] ondemand_readahead+0x208/0x214 [527319.461094] [0000000000496018] do_generic_mapping_read+0xe8/0x428 [527319.461152] [0000000000497948] generic_file_aio_read+0x108/0x170 [527319.461217] [00000000004badac] do_sync_read+0x88/0xd0 [527319.461292] [00000000004bb5cc] vfs_read+0x78/0x10c [527319.461361] [00000000004bb920] sys_read+0x34/0x60 [527319.461424] [0000000000406294] linux_sparc_syscall32+0x3c/0x40 The calltrace is significant: __do_page_cache_readahead allocates a number of pages with GFP_KERNEL, and hence it should have reclaimed sufficient memory to satisfy GFP_ATOMIC allocations. However after the list of pages goes to mpage_readpages, there can be significant intervals (including disk IO) before all the pages are inserted into the radix-tree. So the reserves can easily be depleted at that point. The patch is confirmed to fix the problem. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
|
|
Peter Lund
|
430d275a39 |
avoid negative (and full-width) shifts in radix-tree.c
Negative shifts are not allowed in C (the result is undefined). Same thing
with full-width shifts.
It works on most platforms but not on the VAX with gcc 4.0.1 (it results in an
"operand reserved" fault).
Shifting by more than the width of the value on the left is also not
allowed. I think the extra '>> 1' tacked on at the end in the original
code was an attempt to work around that. Getting rid of that is an extra
feature of this patch.
Here's the chapter and verse, taken from the final draft of the C99
standard ("6.5.7 Bitwise shift operators", paragraph 3):
"The integer promotions are performed on each of the operands. The
type of the result is that of the promoted left operand. If the
value of the right operand is negative or is greater than or equal
to the width of the promoted left operand, the behavior is
undefined."
Thank you to Jan-Benedict Glaw, Christoph Hellwig, Maciej Rozycki, Pekka
Enberg, Andreas Schwab, and Christoph Lameter for review. Special thanks
to Andreas for spotting that my fix only removed half the undefined
behaviour.
Signed-off-by: Peter Lund <firefly@vax64.dk>
Christoph Lameter <clameter@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: WU Fengguang <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|