Commit Graph

416158 Commits

Author SHA1 Message Date
Ben Pfaff 8f49ce1135 openvswitch: Shrink sw_flow_mask by 8 bytes (64-bit) or 4 bytes (32-bit).
We won't normally have a ton of flow masks but using a size_t to store
values no bigger than sizeof(struct sw_flow_key) seems excessive.

This reduces sw_flow_key_range and sw_flow_mask by 4 bytes on 32-bit
systems.  On 64-bit systems it shrinks sw_flow_key_range by 12 bytes but
sw_flow_mask only by 8 bytes due to padding.

Compile tested only.

Signed-off-by: Ben Pfaff <blp@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06 15:51:27 -08:00
Ben Pfaff d1211908b9 openvswitch: Correct comment.
Signed-off-by: Ben Pfaff <blp@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2014-01-06 15:51:21 -08:00
David S. Miller 56a4342dfe Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
	net/ipv6/ip6_tunnel.c
	net/ipv6/ip6_vti.c

ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.

qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 17:37:45 -05:00
Gianluca Anzolin f86772af6a Bluetooth: Remove rfcomm_carrier_raised()
Remove the rfcomm_carrier_raised() definition as that function isn't
used anymore.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-01-06 13:51:45 -08:00
Gianluca Anzolin 4a2fb3ecc7 Bluetooth: Always wait for a connection on RFCOMM open()
This patch fixes two regressions introduced with the recent rfcomm tty
rework.

The current code uses the carrier_raised() method to wait for the
bluetooth connection when a process opens the tty.

However processes may open the port with the O_NONBLOCK flag or set the
CLOCAL termios flag: in these cases the open() syscall returns
immediately without waiting for the bluetooth connection to
complete.

This behaviour confuses userspace which expects an established bluetooth
connection.

The patch restores the old behaviour by waiting for the connection in
rfcomm_dev_activate() and removes carrier_raised() from the tty_port ops.

As a side effect the new code also fixes the case in which the rfcomm
tty device is created with the flag RFCOMM_REUSE_DLC: the old code
didn't call device_move() and ModemManager skipped the detection
probe. Now device_move() is always called inside rfcomm_dev_activate().

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Reported-by: Andrey Vihrov <andrey.vihrov@gmail.com>
Reported-by: Beson Chow <blc+bluez@mail.vanade.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-01-06 13:51:45 -08:00
Gianluca Anzolin e228b63390 Bluetooth: Move rfcomm_get_device() before rfcomm_dev_activate()
This is a preparatory patch which moves the rfcomm_get_device()
definition before rfcomm_dev_activate() where it will be used.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-01-06 13:51:45 -08:00
Gianluca Anzolin 5b89924187 Bluetooth: Release RFCOMM port when the last user closes the TTY
This patch fixes a userspace regression introduced by the commit
29cd718b.

If the rfcomm device was created with the flag RFCOMM_RELEASE_ONHUP the
user space expects that the tty_port is released as soon as the last
process closes the tty.

The current code attempts to release the port in the function
rfcomm_dev_state_change(). However it won't get a reference to the
relevant tty to send a HUP: at that point the tty is already destroyed
and therefore NULL.

This patch fixes the regression by taking over the tty refcount in the
tty install method(). This way the tty_port is automatically released as
soon as the tty is destroyed.

As a consequence the check for RFCOMM_RELEASE_ONHUP flag in the hangup()
method is now redundant. Instead we have to be careful with the reference
counting in the rfcomm_release_dev() function.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>
Reported-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-01-06 13:51:45 -08:00
Rafael J. Wysocki 77410baf45 Merge branches 'acpi-battery' and 'pm-cpufreq'
* acpi-battery:
  ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS

* pm-cpufreq:
  intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
2014-01-06 22:49:08 +01:00
Jamal Hadi Salim 805c1f4aed net_sched: act: action flushing missaccounting
action flushing missaccounting
Account only for deleted actions

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:46:56 -05:00
Jamal Hadi Salim 63acd6807c net_sched: Remove unnecessary checks for act->ops
Remove unnecessary checks for act->ops
(suggested by Eric Dumazet).

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:46:32 -05:00
sfeldma@cumulusnetworks.com fbf2671bb8 bridge: use DEVICE_ATTR_xx macros
Use DEVICE_ATTR_RO/RW macros to simplify bridge sysfs attribute definitions.

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:40:46 -05:00
Curt Brune fe0d692bbc bridge: use spin_lock_bh() in br_multicast_set_hash_max
br_multicast_set_hash_max() is called from process context in
net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function.

br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock),
which can deadlock the CPU if a softirq that also tries to take the
same lock interrupts br_multicast_set_hash_max() while the lock is
held .  This can happen quite easily when any of the bridge multicast
timers expire, which try to take the same lock.

The fix here is to use spin_lock_bh(), preventing other softirqs from
executing on this CPU.

Steps to reproduce:

1. Create a bridge with several interfaces (I used 4).
2. Set the "multicast query interval" to a low number, like 2.
3. Enable the bridge as a multicast querier.
4. Repeatedly set the bridge hash_max parameter via sysfs.

  # brctl addbr br0
  # brctl addif br0 eth1 eth2 eth3 eth4
  # brctl setmcqi br0 2
  # brctl setmcquerier br0 1

  # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done

Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:39:47 -05:00
Eric Dumazet 8f646c922d vxlan: keep original skb ownership
Sathya Perla posted a patch trying to address following problem :

<quote>
 The vxlan driver sets itself as the socket owner for all the TX flows
 it encapsulates (using vxlan_set_owner()) and assigns it's own skb
 destructor. This causes all tunneled traffic to land up on only one TXQ
 as all encapsulated skbs refer to the vxlan socket and not the original
 socket.  Also, the vxlan skb destructor breaks some functionality for
 tunneled traffic like wmem accounting and as TCP small queues and
 FQ/pacing packet scheduler.
</quote>

I reworked Sathya patch and added some explanations.

vxlan_xmit() can avoid one skb_clone()/dev_kfree_skb() pair
and gain better drop monitor accuracy, by calling kfree_skb() when
appropriate.

The UDP socket used by vxlan to perform encapsulation of xmit packets
do not need to be alive while packets leave vxlan code. Its better
to keep original socket ownership to get proper feedback from qdisc and
NIC layers.

We use skb->sk to

A) control amount of bytes/packets queued on behalf of a socket, but
prior vxlan code did the skb->sk transfert without any limit/control
on vxlan socket sk_sndbuf.

B) security purposes (as selinux) or netfilter uses, and I do not think
anything is prepared to handle vxlan stacked case in this area.

By not changing ownership, vxlan tunnels behave like other tunnels.
As Stephen mentioned, we might do the same change in L2TP.

Reported-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:37:09 -05:00
Eric Dumazet 996b175e39 tcp: out_of_order_queue do not use its lock
TCP out_of_order_queue lock is not used, as queue manipulation
happens with socket lock held and we therefore use the lockless
skb queue routines (as __skb_queue_head())

We can use __skb_queue_head_init() instead of skb_queue_head_init()
to make this more consistent.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:34:34 -05:00
Hannes Frederic Sowa 88ad31491e ipv6: don't install anycast address for /128 addresses on routers
It does not make sense to create an anycast address for an /128-prefix.
Suppress it.

As 32019e651c ("ipv6: Do not leave router anycast address for /127
prefixes.") shows we also may not leave them, because we could accidentally
remove an anycast address the user has allocated or got added via another
prefix.

Cc: François-Xavier Le Bail <fx.lebail@yahoo.com>
Cc: Thomas Haller <thaller@redhat.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:32:43 -05:00
Dan Williams e5e97ee956 hso: fix handling of modem port SERIAL_STATE notifications
The existing serial state notification handling expected older Option
devices, having a hardcoded assumption that the Modem port was always
USB interface #2.  That isn't true for devices from the past few years.

hso_serial_state_notification is a local cache of a USB Communications
Interface Class SERIAL_STATE notification from the device, and the
USB CDC specification (section 6.3, table 67 "Class-Specific Notifications")
defines wIndex as the USB interface the event applies to.  For hso
devices this will always be the Modem port, as the Modem port is the
only port which is set up to receive them by the driver.

So instead of always expecting USB interface #2, instead validate the
notification with the actual USB interface number of the Modem port.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:29:44 -05:00
Lan Tianyu a90b403857 ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS
The AML method _BIX of NEC LZ750/LS returns a broken package which
skips the first member "Revision" (ACPI 5.0, Table 10-234).

Add a quirk for this machine to skip member "Revision" during parsing
the package returned by _BIX.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=67351
Reported-and-tested-by: Francisco Castro <fcr@adinet.com.uy>
Cc: 3.8+ <stable@vger.kernel.org> " 3.8+
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06 22:28:57 +01:00
Veaceslav Falico 0b23810d8c bonding: fix kstrtou8() return value verification in num_peer_notif
It returns 0 in case of success, !0 error otherwise. Fix the improper error
verification.

Fixes: 2c9839c143 ("bonding: add num_grat_arp attribute netlink support")
CC: sfeldma@cumulusnetworks.com
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:26:00 -05:00
hayeswang 31ca1decfb r8152: replace the return value of rtl_ops_init
Replace the boolean value with the error code for the return value
of the rtl_ops_init().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:24:09 -05:00
hayeswang e3ad412ad8 r8152: move the actions of saving the information of the device
Some information of the device may be used in other functions. Move
the relative code to make sure it would be initialzed correctly
before using it.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:24:09 -05:00
hayeswang 45f4a19f6d r8152: replace some tabs with spaces
Replace the tabs of the variables declaration with the spaces.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 16:24:09 -05:00
Dirk Brandewie 6cbd7ee10e intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
KVM environments do not support APERF/MPERF MSRs. intel_pstate cannot
operate without these registers.

The previous validity checks in intel_pstate_msrs_not_valid() are
insufficent in nested KVMs.

References: https://bugzilla.redhat.com/show_bug.cgi?id=1046317
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06 22:16:14 +01:00
Guenter Roeck 22d3b76ed7 isdn: Drop big endian cpp checks from telespci and hfc_pci drivers
With arm:allmodconfig, building the Teles PCI driver fails with

telespci.c:294:2: error: #error "not running on big endian machines now"

Similar, building the driver for HFC PCI-Bus cards fails with

hfc_pci.c:1647:2: error: #error "not running on big endian machines now"

Remove the big endian cpp check from both drivers to fix the build errors.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 15:50:51 -05:00
Arend van Spriel 6e08d757b7 mmc: add SDIO identifiers for Broadcom WLAN devices
The SDIO identifier for Broadcom WLAN devices were defined in the
brcmfmac SDIO driver. Moving the definitions in MMC header file
seems common sense.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:06 -05:00
Arend van Spriel 9df4d542fc brcmfmac: use custom destructor callback for all netdevice interfaces
The destructor for net devices was set to free_netdev() to get rid
of it and the private data. The private data refers to a brcmf_if
instance, but indirectly it also refers to brcmf_cfg80211_vif which
holds the wdev. This is freed as well by using a new custom destructor
called brcmf_cfg80211_free_netdev().

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:06 -05:00
Arend van Spriel e14799514d brcmfmac: call brcmf_cfg80211_detach() after removal of interfaces
Instead of calling brcmf_cfg80211_detach() in brcmf_del_if() when
deleting the primary interface, call it in brcmf_detach() after
deleting all interfaces.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:05 -05:00
Arend van Spriel 427dec5fc8 brcmfmac: move wiphy_unregister() call to brcmf_cfg80211_detach()
The wiphy_unregister() call was done in brcmf_free_vif() when the
last interface was being removed. This is not the obvious place to
do that. This patch moves it to the brcmf_cfg80211_detach(). This
removes the need to keep count of interfaces.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:04 -05:00
Arend van Spriel 43dffbc6be brcmfmac: inform cfg80211 when changing the CONNECTED state
Upon unload of the brcmfmac driver it gave a kernel warning because
cfg80211 still believed to be connected to an AP. The brcmfmac had
already transitioned to disconnected state during unload. This patch
adds informing cfg80211 about this transition. This will get rid of
warning from cfg80211 seen upon module unload:

 ------------[ cut here ]------------
 WARNING: CPU: 3 PID: 24303 at net/wireless/core.c:952
	cfg80211_netdev_notifier_call+0x193/0x640 [cfg80211]()
 Modules linked in: brcmfmac(O-) brcmutil(O) cfg80211(O) ... [last unloaded: bcma]
 CPU: 3 PID: 24303 Comm: rmmod Tainted: G        W  O 3.13.0-rc4-wl-testing-x64-00002-gb472b6d-dirty #1
 Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
  00000000000003b8 ffff8800b211faf8 ffffffff815a7fcd 0000000000000007
  0000000000000000 ffff8800b211fb38 ffffffff8104819c ffff880000000000
  ffff8800c889d008 ffff8800b2000220 ffff8800c889a000 ffff8800c889d018
 Call Trace:
  [<ffffffff815a7fcd>] dump_stack+0x46/0x58
  [<ffffffff8104819c>] warn_slowpath_common+0x8c/0xc0
  [<ffffffff810481ea>] warn_slowpath_null+0x1a/0x20
  [<ffffffffa173fd83>] cfg80211_netdev_notifier_call+0x193/0x640 [cfg80211]
  [<ffffffff81521ca8>] ? arp_ifdown+0x18/0x20
  [<ffffffff8152d75a>] ? fib_disable_ip+0x3a/0x50
  [<ffffffff815b143d>] notifier_call_chain+0x4d/0x70
  [<ffffffff8106d6e6>] raw_notifier_call_chain+0x16/0x20
  [<ffffffff814b9ae0>] call_netdevice_notifiers_info+0x40/0x70
  [<ffffffff814b9b26>] call_netdevice_notifiers+0x16/0x20
  [<ffffffff814bb59d>] rollback_registered_many+0x17d/0x280
  [<ffffffff814bb74d>] rollback_registered+0x2d/0x40
  [<ffffffff814bb7c8>] unregister_netdevice_queue+0x68/0xd0
  [<ffffffff814bb9c0>] unregister_netdev+0x20/0x30
  [<ffffffffa180069e>] brcmf_del_if+0xce/0x180 [brcmfmac]
  [<ffffffffa1800b3c>] brcmf_detach+0x6c/0xe0 [brcmfmac]

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:04 -05:00
Arend van Spriel 76a4c6817c brcmfmac: only disable clock when brcmf_sdio_bus_init() fails
The condition to disable the clock at the end of brcmf_sdio_bus_init()
was wrong as the bus state is updated by the calling function. Hence,
the clock was always disabled after brcmf_sdio_bus_init() which was
not the intended behaviour.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:03 -05:00
Arend van Spriel d6ae2c51be brcmfmac: enable watchdog when bus initialization is complete
Change condition in brcmf_sdio_wd_timer() function to program
watchdog only when in BRCMF_BUS_DATA state. This avoids watchdog
being active during initialization. During initialization the
SDIO save&restore capability is determined which affect the
bus sleep mechanism used in watchdog thread.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:03 -05:00
Arend van Spriel 3bd44d991f brcmfmac: correct detection of save&restore device capability
The detection of the save&restore capability in brcmf_sdio_sr_capable()
is only valid for certain chipsets. This patch should cover it for all
chipsets currently supported.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:02 -05:00
Arend van Spriel af35f55f94 brcmfmac: add sdio drive strength programming for bcm4334 chipset
The table for BCM4334 SDIO drive strength programming was missing
from the driver. Adding it with this patch set.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:02 -05:00
Arend van Spriel 2375d9701b brcmfmac: correct reporting HT40 support in wiphy htcap
Using 'iw phy' only showed HT20 support in the HT capabilities info.
This patch determines support for HT40 using a firmware query that
is supposed to work for all supported devices.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:01 -05:00
Arend van Spriel fad1322850 brcmfmac: cleanup helper functions in sdio probe path
Moving code from helper functions to the calling function
as it makes code easier to read.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:00 -05:00
Arend van Spriel bfad4a048c brcmfmac: cleanup helper functions in sdio remove path
Two helper functions in the sdio remove path were very thin and
only used once. So its code is moved to the calling function.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:48:00 -05:00
Hante Meuleman d453399229 brcmfmac: Limit control message length from host to device.
An control request or set message length is restricted to
ETH frame length for the buffer from host to device. This
is limitation is imposed by the firmware.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:47:59 -05:00
Hante Meuleman 75b39dd240 brcmfmac: Remove some obsolete definitions and variables.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:47:59 -05:00
Arend van Spriel 71c60cf2e9 brcmfmac: rework SDIO register access functions
The logic in the SDIO register access functions was hard to
read and contained a lot of conditional code path. This rework
attempts to clean it up.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-06 15:47:58 -05:00
Vijay Subramanian d4b36210c2 net: pkt_sched: PIE AQM scheme
Proportional Integral controller Enhanced (PIE) is a scheduler to address the
bufferbloat problem.

>From the IETF draft below:
" Bufferbloat is a phenomenon where excess buffers in the network cause high
latency and jitter. As more and more interactive applications (e.g. voice over
IP, real time video streaming and financial transactions) run in the Internet,
high latency and jitter degrade application performance. There is a pressing
need to design intelligent queue management schemes that can control latency and
jitter; and hence provide desirable quality of service to users.

We present here a lightweight design, PIE(Proportional Integral controller
Enhanced) that can effectively control the average queueing latency to a target
value. Simulation results, theoretical analysis and Linux testbed results have
shown that PIE can ensure low latency and achieve high link utilization under
various congestion situations. The design does not require per-packet
timestamp, so it incurs very small overhead and is simple enough to implement
in both hardware and software.  "

Many thanks to Dave Taht for extensive feedback, reviews, testing and
suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and
suggestions.  Naeem Khademi and Dave Taht independently contributed to ECN
support.

For more information, please see technical paper about PIE in the IEEE
Conference on High Performance Switching and Routing 2013. A copy of the paper
can be found at ftp://ftpeng.cisco.com/pie/.

Please also refer to the IETF draft submission at
http://tools.ietf.org/html/draft-pan-tsvwg-pie-00

All relevant code, documents and test scripts and results can be found at
ftp://ftpeng.cisco.com/pie/.

For problems with the iproute2/tc or Linux kernel code, please contact Vijay
Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu
(mysuryan@cisco.com)

Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Mythili Prabhu <mysuryan@cisco.com>
CC: Dave Taht <dave.taht@bufferbloat.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 15:13:01 -05:00
John W. Linville e46316c86e Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes 2014-01-06 14:20:07 -05:00
John W. Linville a50f9d5ee0 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2014-01-06 14:19:18 -05:00
John W. Linville 9d1cd503c7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-01-06 14:08:41 -05:00
Eric Whitney d0abafac8c ext4: fix bigalloc regression
Commit f5a44db5d2 introduced a regression on filesystems created with
the bigalloc feature (cluster size > blocksize).  It causes xfstests
generic/006 and /013 to fail with an unexpected JBD2 failure and
transaction abort that leaves the test file system in a read only state.
Other xfstests run on bigalloc file systems are likely to fail as well.

The cause is the accidental use of a cluster mask where a cluster
offset was needed in ext4_ext_map_blocks().

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
2014-01-06 14:00:23 -05:00
David S. Miller 83111e7fe8 netfilter: Fix build failure in nfnetlink_queue_core.c.
net/netfilter/nfnetlink_queue_core.c: In function 'nfqnl_put_sk_uidgid':
net/netfilter/nfnetlink_queue_core.c:304:35: error: 'TCP_TIME_WAIT' undeclared (first use in this function)
net/netfilter/nfnetlink_queue_core.c:304:35: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [net/netfilter/nfnetlink_queue_core.o] Error 1

Just a missing include of net/tcp_states.h

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 13:36:06 -05:00
David S. Miller 9aa28f2b71 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nftables
Pablo Neira Ayuso says: <pablo@netfilter.org>

====================
nftables updates for net-next

The following patchset contains nftables updates for your net-next tree,
they are:

* Add set operation to the meta expression by means of the select_ops()
  infrastructure, this allows us to set the packet mark among other things.
  From Arturo Borrero Gonzalez.

* Fix wrong format in sscanf in nf_tables_set_alloc_name(), from Daniel
  Borkmann.

* Add new queue expression to nf_tables. These comes with two previous patches
  to prepare this new feature, one to add mask in nf_tables_core to
  evaluate the queue verdict appropriately and another to refactor common
  code with xt_NFQUEUE, from Eric Leblond.

* Do not hide nftables from Kconfig if nfnetlink is not enabled, also from
  Eric Leblond.

* Add the reject expression to nf_tables, this adds the missing TCP RST
  support. It comes with an initial patch to refactor common code with
  xt_NFQUEUE, again from Eric Leblond.

* Remove an unused variable assignment in nf_tables_dump_set(), from Michal
  Nazarewicz.

* Remove the nft_meta_target code, now that Arturo added the set operation
  to the meta expression, from me.

* Add help information for nf_tables to Kconfig, also from me.

* Allow to dump all sets by specifying NFPROTO_UNSPEC, similar feature is
  available to other nf_tables objects, requested by Arturo, from me.

* Expose the table usage counter, so we can know how many chains are using
  this table without dumping the list of chains, from Tomasz Bursztyka.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 13:29:30 -05:00
David S. Miller 6a8c4796df Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e only.

Majority of this series contains patches from Greg and Mitch to fix
up or add functionality to the PF/VF driver interactions.  Notably,
a fix for SR-IOV VF port VLAN which resolved the problem of port VLAN
configurations not being persistent across VF driver loads and unloads
and enable/disable of the feature.  Also do not enable the default port
on the VEB, which is designed only to bridge the PF to an Open vSwitch
or bridge.  Another fix to resolve a possible memory corruption
condition where ARQ messages are written to random memory locations.
Fix a problem where the 'ip link show' command would display stale
link address information after the link address was set via the 'ip
link set' command.

Anjali provides several patches, one which saves information that can
be used while cleaning the Tx ring and useful in detecting Tx hangs.
Then provides a fixes to the admin queue shutdown function to ensure
we are shutting down the queue in the shutdown path and ensure ASQ is
alive before issuing the admin queue command.

Shannon provides a fix for get/update vsi params where the incorrect
struct was being used.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 13:25:58 -05:00
David S. Miller ce088848c2 Merge branch 'be2net'
Sathya Perla says:

====================
be2net: patch set

Pls apply the following bug fixes to the 'net' tree. Thanks.

Suresh Reddy (2):
  be2net: increase the timeout value for loopback-test FW cmd
  be2net: fix max_evt_qs calculation for BE3 in SR-IOV config

Vasundhara Volam (1):
  be2net: disable RSS when number of RXQs is reduced to 1 via
    set-channels
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 13:09:26 -05:00
Suresh Reddy e3dc867c17 be2net: fix max_evt_qs calculation for BE3 in SR-IOV config
The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF.
When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs.

Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 13:09:21 -05:00
Suresh Reddy 5eeff6354f be2net: increase the timeout value for loopback-test FW cmd
The loopback test FW cmd may need upto 15 seconds to complete on
certain PHYs. This patch also fixes the name of the completion variable
used to synchronize FW cmd completions as it not used by the flashing
cmd alone anymore.

Signed-off-by: Suresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 13:09:21 -05:00
Vasundhara Volam da1388d655 be2net: disable RSS when number of RXQs is reduced to 1 via set-channels
When *only* the default RXQ is used, the RSS policy must be disabled so
that all IP and no-IP traffic is placed into the default RXQ. If not,
IP traffic is dropped.

Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for
the interface.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 13:09:21 -05:00