Commit Graph

61 Commits

Author SHA1 Message Date
Jens Axboe 1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Linus Torvalds f0c98ebc57 libnvdimm for 4.8
1/ Replace pcommit with ADR / directed-flushing:
    The pcommit instruction, which has not shipped on any product, is
    deprecated. Instead, the requirement is that platforms implement either
    ADR, or provide one or more flush addresses per nvdimm. ADR
    (Asynchronous DRAM Refresh) flushes data in posted write buffers to the
    memory controller on a power-fail event. Flush addresses are defined in
    ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure:
    "Flush Hint Address Structure". A flush hint is an mmio address that
    when written and fenced assures that all previous posted writes
    targeting a given dimm have been flushed to media.
 
 2/ On-demand ARS (address range scrub):
    Linux uses the results of the ACPI ARS commands to track bad blocks
    in pmem devices.  When latent errors are detected we re-scrub the media
    to refresh the bad block list, userspace can also request a re-scrub at
    any time.
 
 3/ Support for the Microsoft DSM (device specific method) command format.
 
 4/ Support for EDK2/OVMF virtual disk device memory ranges.
 
 5/ Various fixes and cleanups across the subsystem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXmXBsAAoJEB7SkWpmfYgCEwwP/1IOt9ocP+iHLMDH9KE7VaTZ
 NmUDR+Zy6g5cRQM7SgcuU5BXUcx+OsSrSrUTVF1cW994o9Gbz1mFotkv0ZAsPcYY
 ZVRQxo2oqHrssyOcg+PsgKWiXn68rJOCgmpEyzaJywl5qTMst7pzsT1s1f7rSh6h
 trCf4VaJJwxZR8fARGtlHUnnhPe2Orp99EZRKEWprAsIv2kPuWpPHSjRjuEgN1JG
 KW8AYwWqFTtiLRUk86I4KBB0wcDrfctsjgN9Ogd6+aHyQBRnVSr2U+vDCFkC8KLu
 qiDCpYp+yyxBjclnljz7tRRT3GtzfCUWd4v2KVWqgg2IaobUc0Lbukp/rmikUXQP
 WLikT2OCQ994eFK5OX3Q3cIU/4j459TQnof8q14yVSpjAKrNUXVSR5puN7Hxa+V7
 41wKrAsnsyY1oq+Yd/rMR8VfH7PHx3bFkrmRCGZCufLX1UQm4aYj+sWagDKiV3yA
 DiudghbOnhfurfGsnXUVw7y7GKs+gNWNBmB6ndAD6ZEHmKoGUhAEbJDLCc3DnANl
 b/2mv1MIdIcC1DlCmnbbcn6fv6bICe/r8poK3VrCK3UgOq/EOvKIWl7giP+k1JuC
 6DdVYhlNYIVFXUNSLFAwz8OkLu8byx7WDm36iEqrKHtPw+8qa/2bWVgOU6OBgpjV
 cN3edFVIdxvZeMgM5Ubq
 =xCBG
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:

 - Replace pcommit with ADR / directed-flushing.

   The pcommit instruction, which has not shipped on any product, is
   deprecated.  Instead, the requirement is that platforms implement
   either ADR, or provide one or more flush addresses per nvdimm.

   ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
   to the memory controller on a power-fail event.

   Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
   Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
   A flush hint is an mmio address that when written and fenced assures
   that all previous posted writes targeting a given dimm have been
   flushed to media.

 - On-demand ARS (address range scrub).

   Linux uses the results of the ACPI ARS commands to track bad blocks
   in pmem devices.  When latent errors are detected we re-scrub the
   media to refresh the bad block list, userspace can also request a
   re-scrub at any time.

 - Support for the Microsoft DSM (device specific method) command
   format.

 - Support for EDK2/OVMF virtual disk device memory ranges.

 - Various fixes and cleanups across the subsystem.

* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
  libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
  nfit: do an ARS scrub on hitting a latent media error
  nfit: move to nfit/ sub-directory
  nfit, libnvdimm: allow an ARS scrub to be triggered on demand
  libnvdimm: register nvdimm_bus devices with an nd_bus driver
  pmem: clarify a debug print in pmem_clear_poison
  x86/insn: remove pcommit
  Revert "KVM: x86: add pcommit support"
  nfit, tools/testing/nvdimm/: unify shutdown paths
  libnvdimm: move ->module to struct nvdimm_bus_descriptor
  nfit: cleanup acpi_nfit_init calling convention
  nfit: fix _FIT evaluation memory leak + use after free
  tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
  tools/testing/nvdimm: add virtual ramdisk range
  acpi, nfit: treat virtual ramdisk SPA as pmem region
  pmem: kill __pmem address space
  pmem: kill wmb_pmem()
  libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
  fs/dax: remove wmb_pmem()
  libnvdimm, pmem: flush posted-write queues on shutdown
  ...
2016-07-28 17:38:16 -07:00
Toshi Kani beec25b457 dm stripe: add DAX support
Change dm-stripe to implement direct_access function,
stripe_direct_access(), which maps bdev and sector and
calls direct_access function of its physical target device.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-07-20 23:49:51 -04:00
Mike Christie 28a8f0d317 block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie e6047149db dm: use bio op accessors
Separate the op from the rq_flag_bits and have dm
set/get the bio using bio_set_op_attrs/bio_op.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Linus Torvalds 1e1a4e8f43 Merge tag 'dm-4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper update from Mike Snitzer:

 - a couple small cleanups in dm-cache, dm-verity, persistent-data's
   dm-btree, and DM core.

 - a 4.1-stable fix for dm-cache that fixes the leaking of deferred bio
   prison cells

 - a 4.2-stable fix that adds feature reporting for the dm-stats
   features added in 4.2

 - improve DM-snapshot to not invalidate the on-disk snapshot if
   snapshot device write overflow occurs; but a write overflow triggered
   through the origin device will still invalidate the snapshot.

 - optimize DM-thinp's async discard submission a bit now that late bio
   splitting has been included in block core.

 - switch DM-cache's SMQ policy lock from using a mutex to a spinlock;
   improves performance on very low latency devices (eg. NVMe SSD).

 - document DM RAID 4/5/6's discard support

[ I did not pull the slab changes, which weren't appropriate for this
  tree, and weren't obviously the right thing to do anyway.  At the very
  least they need some discussion and explanation before getting merged.

  Because not pulling the actual tagged commit but doing a partial pull
  instead, this merge commit thus also obviously is missing the git
  signature from the original tag ]

* tag 'dm-4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix use after freeing migrations
  dm cache: small cleanups related to deferred prison cell cleanup
  dm cache: fix leaking of deferred bio prison cells
  dm raid: document RAID 4/5/6 discard support
  dm stats: report precise_timestamps and histogram in @stats_list output
  dm thin: optimize async discard submission
  dm snapshot: don't invalidate on-disk image on snapshot write overflow
  dm: remove unlikely() before IS_ERR()
  dm: do not override error code returned from dm_get_device()
  dm: test return value for DM_MAPIO_SUBMITTED
  dm verity: remove unused mempool
  dm cache: move wake_waker() from free_migrations() to where it is needed
  dm btree remove: remove unused function get_nr_entries()
  dm btree: remove unused "dm_block_t root" parameter in btree_split_sibling()
  dm cache policy smq: change the mutex to a spinlock
2015-09-02 16:35:26 -07:00
Kent Overstreet 8ae126660f block: kill merge_bvec_fn() completely
As generic_make_request() is now able to handle arbitrarily sized bios,
it's no longer necessary for each individual block driver to define its
own ->merge_bvec_fn() callback. Remove every invocation completely.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@kernel.org>
Cc: ceph-devel@vger.kernel.org
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
 dm-era-target, and resolve merge conflicts]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13 12:31:57 -06:00
Vivek Goyal e80d1c805a dm: do not override error code returned from dm_get_device()
Some of the device mapper targets override the error code returned by
dm_get_device() and return either -EINVAL or -ENXIO.  There is nothing
gained by this override.  It is better to propagate the returned error
code unchanged to caller.

This work was motivated by hitting an issue where the underlying device
was busy but -EINVAL was being returned.  After this change we get
-EBUSY instead and it is easier to figure out the problem.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:21 -04:00
Christoph Hellwig 4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00
Luis Henriques e223e1de4f dm stripe: drop useless exit point from dm_stripe_init()
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-29 14:19:01 -04:00
Pavitra Kumar a3f2af2547 dm stripe: fix potential for leak in stripe_ctr error path
Fix a potential struct stripe_c leak that would occur if the
chunk_size exceeded the maximum allowed by dm_set_target_max_io_len
(UINT_MAX).  However, in practice there is no possibility of this
occuring given that chunk_size is of type uint32_t.  But it is good to
fix this to future-proof in case dm_set_target_max_io_len's
implementation were to change.

Signed-off-by: Pavitra Kumar <pavitrak@nvidia.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-10-10 22:05:18 -04:00
Kent Overstreet 4f024f3797 block: Abstract out bvec iterator
Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6
2013-11-23 22:33:47 -08:00
Mike Snitzer 7fff5e8f72 dm stripe: silence a couple sparse warnings
Eliminate the following sparse warnings:
drivers/md/dm-stripe.c:443:12: warning: symbol 'dm_stripe_init' was not declared. Should it be static?
drivers/md/dm-stripe.c:456:6: warning: symbol 'dm_stripe_exit' was not declared. Should it be static?

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-09-06 11:36:01 -04:00
Mike Snitzer d793e68427 dm stripe: fix regression in stripe_width calculation
Fix a regression in the calculation of the stripe_width in the
dm stripe target which led to incorrect processing of device limits.

The stripe_width is the stripe device length divided by the number of
stripes.  The group of commits in the range f14fa69 ("dm stripe: fix
size test") to eb850de ("dm stripe: support for non power of 2
chunksize") interfered with each other (a merging error) and led to the
stripe_width being set incorrectly to the stripe device length divided by
chunk_size * stripe_count.

For example, a stripe device's table with: 0 33553920 striped 3 512 ...
should result in a stripe_width of 11184640 (33553920 / 3), but due to
the bug it was getting set to 21845 (33553920 / (512 * 3)).

The impact of this bug is that device topologies that previously worked
fine with the stripe target are no longer considered valid.  In
particular, there is a higher risk of seeing this issue if one of the
stripe devices has a 4K logical block size.  Resulting in an error
message like this:
"device-mapper: table: 253:4: len=21845 not aligned to h/w logical block size 4096 of dm-1"

The fix is to swap the order of the divisions and to use a temporary
variable for the second one, so that width retains the intended
value.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10 14:37:14 +01:00
Kent Overstreet f73a1c7d11 block: Add bio_end_sector()
Just a little convenience macro - main reason to add it now is preparing
for immutable bio vecs, it'll reduce the size of the patch that puts
bi_sector/bi_size/bi_idx into a struct bvec_iter.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Lars Ellenberg <drbd-dev@lists.linbit.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Alasdair Kergon <agk@redhat.com>
CC: dm-devel@redhat.com
CC: Neil Brown <neilb@suse.de>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
CC: linux-s390@vger.kernel.org
CC: Chris Mason <chris.mason@fusionio.com>
CC: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2013-03-23 14:15:29 -07:00
Alasdair G Kergon 55a62eef8d dm: rename request variables to bios
Use 'bio' in the name of variables and functions that deal with
bios rather than 'request' to avoid confusion with the normal
block layer use of 'request'.

No functional changes.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:47 +00:00
Mikulas Patocka fd7c092e71 dm: fix truncated status strings
Avoid returning a truncated table or status string instead of setting
the DM_BUFFER_FULL_FLAG when the last target of a table fills the
buffer.

When processing a table or status request, the function retrieve_status
calls ti->type->status. If ti->type->status returns non-zero,
retrieve_status assumes that the buffer overflowed and sets
DM_BUFFER_FULL_FLAG.

However, targets don't return non-zero values from their status method
on overflow. Most targets returns always zero.

If a buffer overflow happens in a target that is not the last in the
table, it gets noticed during the next iteration of the loop in
retrieve_status; but if a buffer overflow happens in the last target, it
goes unnoticed and erroneously truncated data is returned.

In the current code, the targets behave in the following way:
* dm-crypt returns -ENOMEM if there is not enough space to store the
  key, but it returns 0 on all other overflows.
* dm-thin returns errors from the status method if a disk error happened.
  This is incorrect because retrieve_status doesn't check the error
  code, it assumes that all non-zero values mean buffer overflow.
* all the other targets always return 0.

This patch changes the ti->type->status function to return void (because
most targets don't use the return code). Overflow is detected in
retrieve_status: if the status method fills up the remaining space
completely, it is assumed that buffer overflow happened.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 22:45:44 +00:00
Mike Snitzer 45e621d45e dm stripe: add WRITE SAME support
Rename stripe_map_discard to stripe_map_range and reuse it for WRITE
SAME bio processing.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:41 +00:00
Mikulas Patocka 7de3ee57da dm: remove map_info
This patch removes map_info from bio-based device mapper targets.
map_info is still used for request-based targets.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:41 +00:00
Mikulas Patocka ddbd658f64 dm: move target request nr to dm_target_io
This patch moves target_request_nr from map_info to dm_target_io and
makes it accessible with dm_bio_get_target_request_nr.

This patch is a preparation for the next patch that removes map_info.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-12-21 20:23:39 +00:00
Tejun Heo 43829731dd workqueue: deprecate flush[_delayed]_work_sync()
flush[_delayed]_work_sync() are now spurious.  Mark them deprecated
and convert all users to flush[_delayed]_work().

If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant and the regular flushes guarantee that the work item is
not pending or running on any CPU on return, so there's no reason to
use the sync flushes at all and they're going away.

This patch doesn't make any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mattia Dongili <malattia@linux.it>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avi Kivity <avi@redhat.com>
2012-08-20 14:51:24 -07:00
Alasdair G Kergon 1f4e0ff079 dm thin: commit before gathering status
Commit outstanding metadata before returning the status for a dm thin
pool so that the numbers reported are as up-to-date as possible.

The commit is not performed if the device is suspended or if
the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target
through a new 'status_flags' parameter in the target's dm_status_fn.

The userspace dmsetup tool will support the --noflush flag with the
'dmsetup status' and 'dmsetup wait' commands from version 1.02.76
onwards.

Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:16 +01:00
Mikulas Patocka 33d07c0dfa dm stripe: optimize chunk_size calculations
dm-stripe is usually used with a chunk size that is a power of two.
Use faster shifts and bit masks in such cases.

stripe_width is already optimized in a similar way.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:02 +01:00
Mikulas Patocka 8f069b41bc dm stripe: remove minimum stripe size
There is no technical limitation in device mapper that would prevent the
dm-stripe target from using a stripe size smaller than page size.

This patch removes the limit and makes stripe volumes portable across
architectures with different page size.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:01 +01:00
Mike Snitzer eb850de608 dm stripe: support for non power of 2 chunksize
Support non-power-of-2 chunk sizes with dm striping for proper alignment
of stripe IO on storage that has non-power-of-2 optimal IO sizes (e.g.
RAID6 10+2).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:01 +01:00
Mike Snitzer 542f903814 dm: support non power of two target max_io_len
Remove the restriction that limits a target's specified maximum incoming
I/O size to be a power of 2.

Rename this setting from 'split_io' to the less-ambiguous 'max_io_len'.
Change it from sector_t to uint32_t, which is plenty big enough, and
introduce a wrapper function dm_set_target_max_io_len() to set it.
Use sector_div() to process it now that it is not necessarily a power of 2.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:00 +01:00
Mikulas Patocka 1df05483d7 dm stripe: remove stripes_mask
The structure stripe_c contains a stripes_mask field. This field is
useless because it can be trivially calculated by subtracting one from
stripes. It is used only at one place. This patch removes it.

The patch also changes ffs(stripes) - 1 to __ffs(stripes).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:00 +01:00
Mikulas Patocka f14fa693c9 dm stripe: fix size test
dm-stripe is supposed to ensure that all the space allocated to the
stripes is fully used and that all stripes are the same size.  This
patch fixes the test.  It checks that device length is divisible by the
chunk size and checks that the resulting quotient is divisible by the
number of stripes (which is equivalent to testing if device length is
divisible by chunk_size * stripes).

Previously, the code only tested that the number of sectors in the target
was divisible by each of the chunk size and the number of stripes
separately, which could leave entire stripes unused.

(A setup that genuinely needs some stripes to be shorter than others
can be created by concatenating striped targets.)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:08:00 +01:00
majianpeng 1a66a08ae8 dm: replace simple_strtoul
Replace obsolete simple_strtoul() with kstrtou8/kstrtouint.

Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27 15:07:59 +01:00
Mikulas Patocka 31998ef193 dm: reject trailing characters in sccanf input
Device mapper uses sscanf to convert arguments to numbers. The problem is that
the way we use it ignores additional unmatched characters in the scanned string.

For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number,
but also it will match number with some garbage appended, like "123abc".

As a result, device mapper accepts garbage after some numbers. For example
the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"'
will pass without an error.

This patch fixes all sscanf uses in device mapper. It appends "%c" with
a pointer to a dummy character variable to every sscanf statement.

The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds
only if string is a null-terminated number (optionally preceded by some
whitespace characters). If there is some character appended after the number,
sscanf matches "%c", writes the character to the dummy variable and returns 2.
We check the return value for 1 and consequently reject numbers with some
garbage appended.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-03-28 18:41:26 +01:00
Mustafa Mesanovic 2991520200 dm stripe: implement merge method
Implement a merge function in the striped target.

When the striped target's underlying devices provide a merge_bvec_fn
(like all DM devices do via dm_merge_bvec) it is important to call down
to them when building a biovec that doesn't span a stripe boundary.

Without the merge method, a striped DM device stacked on DM devices
causes bios with a single page to be submitted which results
in unnecessary overhead that hurts performance.

This change really helps filesystems (e.g. XFS and now ext4) which take
care to assemble larger bios.  By implementing stripe_merge(), DM and the
stripe target no longer undermine the filesystem's work by only allowing
a single page per bio.  Buffered IO sees the biggest improvement
(particularly uncached reads, buffered writes to a lesser degree).  This
is especially so for more capable "enterprise" storage LUNs.

The performance improvement has been measured to be ~12-35% -- when a
reasonable chunk_size is used (e.g. 64K) in conjunction with a stripe
count that is a power of 2.

In contrast, the performance penalty is ~5-7% for the pathological worst
case stripe configuration (small chunk_size with a stripe count that is
not a power of 2).  The reason for this is that stripe_map_sector() is
now called once for every call to dm_merge_bvec().  stripe_map_sector()
will use slower division if stripe count isn't a power of 2.

Signed-off-by: Mustafa Mesanovic <mume@linux.vnet.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-03-24 13:54:35 +00:00
Tejun Heo f521f074ab dm stripe: switch from local workqueue to system_wq
kstriped only serves sc->kstriped_ws which runs dm_table_event().
This doesn't need to be executed from an ordered workqueue w/ rescuer.
Drop kstriped and use the system_wq instead.  While at it, rename
kstriped_ws to trigger_event so that it's consistent with other dm
modules.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-01-13 19:59:57 +00:00
Tejun Heo d87f4c14f2 dm: implement REQ_FLUSH/FUA support for bio-based dm
This patch converts bio-based dm to support REQ_FLUSH/FUA instead of
now deprecated REQ_HARDBARRIER.

* -EOPNOTSUPP handling logic dropped.

* Preflush is handled as before but postflush is dropped and replaced
  with passing down REQ_FUA to member request_queues.  This replaces
  one array wide cache flush w/ member specific FUA writes.

* __split_and_process_bio() now calls __clone_and_map_flush() directly
  for flushes and guarantees all FLUSH bio's going to targets are zero
`  length.

* It's now guaranteed that all FLUSH bio's which are passed onto dm
  targets are zero length.  bio_empty_barrier() tests are replaced
  with REQ_FLUSH tests.

* Empty WRITE_BARRIERs are replaced with WRITE_FLUSHes.

* Dropped unlikely() around REQ_FLUSH tests.  Flushes are not unlikely
  enough to be marked with unlikely().

* Block layer now filters out REQ_FLUSH/FUA bio's if the request_queue
  doesn't support cache flushing.  Advertise REQ_FLUSH | REQ_FUA
  capability.

* Request based dm isn't converted yet.  dm_init_request_based_queue()
  resets flush support to 0 for now.  To avoid disturbing request
  based dm code, dm->flush_error is added for bio based dm while
  requested based dm continues to use dm->barrier_error.

Lightly tested linear, stripe, raid1, snap and crypt targets.  Please
proceed with caution as I'm not familiar with the code base.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: dm-devel@redhat.com
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:38 +02:00
Mikulas Patocka 7b76ec11fe dm stripe: support discards
The DM core will submit a discard bio to the stripe target for each
stripe in a striped DM device.  The stripe target will determine
stripe-specific portions of the supplied bio to be remapped into
individual (at most 'num_discard_requests' extents).  If a given
stripe-specific discard bio doesn't touch a particular stripe the bio
will be dropped.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:26 +01:00
Mikulas Patocka c96053b767 dm stripe: optimize sector division
Optimize sector division: If the number of stripes is a power of two,
we can do shift and mask instead of division.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:21 +01:00
Mikulas Patocka 65988525ab dm stripe: move sector translation to a function
Move sector to stripe translation into a function.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:14 +01:00
Alasdair G Kergon b441a262e7 dm: use dm_target_offset macro
Use new dm_target_offset() macro to avoid most references to ti->begin
in dm targets.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:11 +01:00
Mike Snitzer 57cba5d365 dm: rename map_info flush_request to target_request_nr
'target_request_nr' is a more generic name that reflects the fact that
it will be used for both flush and discard support.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-08-12 04:14:04 +01:00
Christoph Hellwig 7b6d91daee block: unify flags for struct bio and struct request
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver.  There were two flags in the bio that were
missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
renamed two request flags that had a superflous RW in them.

Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:20:39 +02:00
Nikanth Karthikesan 8215d6ec5f dm table: remove unused dm_get_device range parameters
Remove unused parameters(start and len) of dm_get_device()
and fix the callers.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-03-06 02:32:27 +00:00
Nikanth Karthikesan 781248c1b5 dm stripe: avoid divide by zero with invalid stripe count
If a table containing zero as stripe count is passed into stripe_ctr
the code attempts to divide by zero.

This patch changes DM_TABLE_LOAD to return -EINVAL if the stripe count
is zero.

We now get the following error messages:
  device-mapper: table: 253:0: striped: Invalid stripe count
  device-mapper: ioctl: error adding target to table

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-02-16 18:42:47 +00:00
Martin K. Petersen 3c5820c743 block: Optimal I/O limit wrapper
Implement blk_limits_io_opt() and make blk_queue_io_opt() a wrapper
around it. DM needs this to avoid poking at the queue_limits directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-14 08:24:52 +02:00
Jens Axboe 1f98a13f62 bio: first step in sanitizing the bio->bi_rw flag testing
Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:31 +02:00
Mike Snitzer 40bea43127 dm stripe: expose correct io hints
Set sensible I/O hints for striped DM devices in the topology
infrastructure added for 2.6.31 for userspace tools to
obtain via sysfs.

Add .io_hints to 'struct target_type' to allow the I/O hints portion
(io_min and io_opt) of the 'struct queue_limits' to be set by each
target and implement this for dm-stripe.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04 20:40:25 +01:00
Mike Snitzer 5dea271b6d dm table: pass correct dev area size to device_area_is_valid
Incorrect device area lengths are being passed to device_area_is_valid().

The regression appeared in 2.6.31-rc1 through commit
754c5fc7eb.

With the dm-stripe target, the size of the target (ti->len) was used
instead of the stripe_width (ti->len/#stripes).  An example of a
consequent incorrect error message is:

  device-mapper: table: 254:0: sdb too small for target

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-07-23 20:30:42 +01:00
Mike Snitzer af4874e03e dm target:s introduce iterate devices fn
Add .iterate_devices to 'struct target_type' to allow a function to be
called for all devices in a DM target.  Implemented it for all targets
except those in dm-snap.c (origin and snapshot).

(The raid1 version number jumps to 1.12 because we originally reserved
1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors'
instead.)

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: martin.petersen@oracle.com
2009-06-22 10:12:33 +01:00
Mikulas Patocka 374bf7e7f6 dm: stripe support flush
Flush support for the stripe target.

This sets ti->num_flush_requests to the number of stripes and
remaps individual flush requests to the appropriate stripe devices.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:22 +01:00
Mikulas Patocka 10d3bd09a3 dm: consolidate target deregistration error handling
Change dm_unregister_target to return void and use BUG() for error
reporting.

dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.

This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.

This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:04:58 +00:00
Heinz Mauelshagen 6edebdee48 dm stripe: fix init failure
Don't proceed if dm_stripe_init() fails to register itself as a dm target.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13 23:38:56 +00:00
Mikulas Patocka 586e80e6ee dm: remove dm header from targets
Change #include "dm.h" to #include <linux/device-mapper.h> in all targets.
Targets should not need direct access to internal DM structures.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21 17:44:59 +01:00