The em28xx driver never touched the EM2874 register bits that control
the transport stream packet filters, leaving them at whatever default
the firmware has set. E.g. the Pinnacle 290e disables them by default,
while the Hauppauge WinTV dualHD enables discarding NULL packets by
default.
However, some applications require NULL packets, e.g. to determine the
load in DOCSIS segments, so discarding NULL packets is undesired for
such applications.
This patch simply extends the bit mask when starting or stopping the
transport stream packet capture, so that the filter bits are cleared.
It has been verified that this makes the Hauppauge WinTV dualHD pass
an unfiltered DVB-C stream including NULL packets, which it didn't
before.
Signed-off-by: Robert Schlabbach <Robert.Schlabbach@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Friio device contains "gl861" bridge and "tc90522" demod,
for which the separate drivers are already in the kernel.
But friio driver was monolithic and did not use them,
practically copying those features.
This patch decomposes friio driver into sub drivers and
re-uses existing ones, thus reduces some code.
It adds some features to gl861,
to support the friio-specific init/config of the devices
and implement i2c communications to the tuner via demod
with USB vendor requests.
[mchehab+samsung@kernel.org: fix merge conflicts]
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
UVC defines a method of handling asynchronous controls, which sends a
USB packet over the interrupt pipe. This patch implements support for
such packets by sending a control event to the user. Since this can
involve USB traffic and, therefore, scheduling, this has to be done
in a work queue.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When a command ends up in a STALL on the control pipe, use the Request
Error Code control to provide a more precise error information to the
user. For example, if a camera is still busy processing a control,
when the same or an interrelated control set request arrives, the
camera can react with a STALL and then return the "Not ready" status
in response to a UVC_VC_REQUEST_ERROR_CODE_CONTROL command. With this
patch the user would then get an EBUSY error code instead of a
generic EPIPE.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Event subscribers cannot have a NULL file handle. They are only added
at a single location in the code, and the .fh pointer is used without
checking there.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Just like for ISOC, validate the decoded BULK buffer size when possible.
This avoids sending corrupted or partial buffers to userspace, which may
lead to application crash or run-time failure.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
[laurent.pinchart@ideasonboard.com: Move uvc_video_validate_buffer() call to uvc_video_next_buffers()]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the 8-bit IR format GUID defined in the Microsoft Kernel
Streaming Media API.
Reported-by: Paul Menzel <pmenzel+linux-media@molgen.mpg.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Paul Menzel <pmenzel+linux-media@molgen.mpg.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Right now, the code that calculates alternate modes is not ready
for devices with dual tuners. That's ok, as we currently don't
have any such devices, but better to add a warning for such
case, as, if anyone adds such device, the logic will need to
be reviewed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Half-revert: commit 5b1a270d22 ("media: dvb: add alternative USB PID for Hauppauge WinTV-soloHD")'
The PID already exists on the line above.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Addresses the following, which introduced a regression itself:
Commit 509f89652f ("media: em28xx: fix a regression with HVR-950")
The regression fix breaks dual transport stream support. Currently,
when a tuner starts streaming it sets alt mode on the USB interface.
The problem is, in a dual tuner model, both tuners share the same
USB interface, so when the second tuner becomes active and sets alt
mode on the interface it kills streaming on the other port.
This patch addresses the regression by only setting alt mode
on the USB interface during em28xx_start_streaming, if the
device is not a dual tuner model. This allows all older and
single tuner devices to explicitly set alt mode during stream
startup. Testers report both isoc and bulk DualHD models work
correctly with the alt mode set only once, in em28xx_dvb_init.
Fixes: 509f89652f ("media: em28xx: fix a regression with HVR-950")
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add FIXME code comment:
/* FIXME: check if it is fe_adap[1] */
It is likely that it should be adap->fe_adap[1].fe in the second clause,
but this has never been verified.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit 1eace8344c ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit 1eace8344c ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit 1eace8344c ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit 1eace8344c ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Since commit 1eace8344c ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Probe of dvb_usb_gl861 was working at least with v4.4. Noticed the issue
with v4.13 but according to similar issues the problem started with v4.9.
[ 15.288065] transfer buffer not dma capable
[ 15.288090] WARNING: CPU: 2 PID: 493 at drivers/usb/core/hcd.c:1595 usb_hcd_map_urb_for_dma+0x4e2/0x640
...CUT...
[ 15.288791] dvb_usb_gl861: probe of 3-7:1.0 failed with error -5
Tested with MSI Mega Sky 580 DVB-T Tuner [GL861]
[mchehab+samsung@kernel.org: rebased on the top of upstream]
Cc: stable@vger.kernel.org
Signed-off-by: Mika Båtsman <mika.batsman@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Comparing an int to a size, which is unsigned, causes the int to become
unsigned, giving the wrong result. kinect_read returns the result of
usb_control_msg, which can return a negtive error code.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
int x;
expression e,e1;
identifier f;
@@
*x = f(...);
... when != x = e1
when != if (x < 0 || ...) { ... return ...; }
*x < sizeof(e)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The vb2_queue will soon be mandatory. The videobuf2 core
will throw a verbose warning if it's not set.
The stk1160 driver is setting the queue lock, but after
the vb2_queue_init call. Avoid the warning by setting
the lock before the queue initialization.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When dvb_register_adapter fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling dvb_register_adapter.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
[hans.verkuil@cisco.com: use pr_err and fix typo: adater -> adapter]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
With CONFIG_RC_CORE=m and VIDEO_CX231XX=y, we get a link failure:
drivers/media/usb/cx231xx/cx231xx-input.o: In function `cx231xx_ir_init':
cx231xx-input.c:(.text+0xd4): undefined reference to `rc_allocate_device'
This narrows down the dependency so that only valid configurations
are allowed.
Fixes: 84545d2a14 ("media: cx231xx: Remove RC_CORE dependency")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are several places pointing to old documentation files:
Documentation/video4linux/API.html
Documentation/video4linux/bttv/
Documentation/video4linux/cx2341x/fw-encoder-api.txt
Documentation/video4linux/m5602.txt
Documentation/video4linux/v4l2-framework.txt
Documentation/video4linux/videobuf
Documentation/video4linux/Zoran
Make them point to the new location where available, removing
otherwise.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
This file got renamed, but the references still point to the
old place.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
This script was moved out of Documentation/dvb, but the
links weren't updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
The addition of an extra operation to use the GET_INFO command
overwrites all existing flags from the uvc_ctrls table. This includes
setting all controls as supporting GET_MIN, GET_MAX, GET_RES, and
GET_DEF regardless of whether they do or not.
Move the initialisation of these control capabilities directly to the
uvc_ctrl_fill_xu_info() call where they were originally located in that
use case, and ensure that the new functionality in uvc_ctrl_get_flags()
will only set flags based on their reported capability from the GET_INFO
call.
Fixes: 859086ae36 ("media: uvcvideo: Apply flags from device to actual properties")
Cc: stable@vger.kernel.org
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: uvcvideo: Support UVC 1.5 video probe & commit controls
The length of UVC 1.5 video control is 48, and it is 34 for UVC 1.1.
Change it to 48 for UVC 1.5 device, and the UVC 1.5 device can be
recognized.
More changes to the driver are needed for full UVC 1.5 compatibility.
However, at least the UVC 1.5 Realtek RTS5847/RTS5852 cameras have been
reported to work well.
[laurent.pinchart@ideasonboard.com: Factor out code to helper function, update size checks]
Cc: stable@vger.kernel.org
Signed-off-by: ming_qian <ming_qian@realsil.com.cn>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Ana Guerrero Lopez <ana.guerrero@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
kref_init initializes the reference count to 1, not 0. This additional
reference is never released since the conversion to reference counters.
As a result, uvc_delete is not called anymore when UVC cameras are
disconnected.
Fix this by adding an additional kref_put in uvc_disconnect and in the
probe error path. This also allows to remove the temporary additional
reference in uvc_unregister_video.
Fixes: 9d15cd958c ("media: uvcvideo: Convert from using an atomic variable to a reference count")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The 50Hz and 60Hz power line frequency settings disable short (1/120s
and 1/100s) exposure times for banding filter (causing overexposed
image near lamps). No flicker setting enables them (when banding
filter is disabled and they're not used).
Seems that the logic is just the wrong way around.
(This bug came from the Windows driver.)
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Power line frequency settings for OV7648 sensor contain autogain
and exposure commands, affecting unrelated controls. Remove them.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The ZS0211 internal autogain causes pumping and flickering with OV7648
sensor on 0ac8:307b webcam.
Implement OV7648 autogain and exposure control and use that instead.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver is the only V4L driver that does not set unlocked_ioctl
to video_ioctl2.
The only thing that pvr2_v4l2_ioctl does besides calling video_ioctl2
is calling pvr2_hdw_commit_ctl(). Add pvr2_hdw_commit_ctl() calls to
the various ioctls that need this, and we can replace pvr2_v4l2_ioctl
by video_ioctl2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Trivial fix to spelling mistake in name field
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The mutexes are not being destroyed in the release path. Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Some subdrivers access the gspca_dev->urb array in the completion handler.
To prevent use-after-free (actually, NULL dereferences) we need to
synchronously kill all the URBs before we release them.
In particular, this is currently the case for drivers such
as sn9c20x and sonixj, which access the gspca_dev->urb[0]
in the context of completion handler for *any* of the URBs.
This commit changes the destroy_urb implementation, so it kills
all URBs first, and then proceed to set the URBs to NULL in the
array and release them.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fix v4l2-compliance error: s_parm never set V4L2_CAP_TIMEPERFRAME.
Also various g/s_parm-related cleanups.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The gspca core has its own buffere implementation. Use the
core VB 2 instead.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver is currently specifying a vb2_queue lock,
which means it straightforward to implement wait_prepare
and wait_finish.
Having these callbacks releases the queue lock while blocking,
which improves latency by allowing for example streamoff
or qbuf operations while waiting in dqbuf.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Right now, the Siano's core uses GFP_DMA for both USB and
SDIO variants of the driver. There's no reason to use it
for USB. So, pass GFP_DMA as a parameter during sms core
register.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There's s no reason why it should be using GFP_DMA there.
This is an USB driver. Any restriction should be, instead,
at HCI core, if any.
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: linux-mm@kvack.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
cx231-417 uses kmalloc/kfree functions, so slab header needs to be
included in order to fix the following build errors:
drivers/media/usb/cx231xx/cx231xx-417.c: In function ‘cx231xx_bulk_copy’:
CC drivers/media/platform/qcom/venus/firmware.o
drivers/media/usb/cx231xx/cx231xx-417.c:1389:11: error: implicit declaration of function ‘kmalloc’; did you mean ‘vmalloc’? [-Werror=implicit-function-declaration]
buffer = kmalloc(buffer_size, GFP_ATOMIC);
^~~~~~~
vmalloc
drivers/media/usb/cx231xx/cx231xx-417.c:1389:9: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
buffer = kmalloc(buffer_size, GFP_ATOMIC);
^
drivers/media/usb/cx231xx/cx231xx-417.c:1400:2: error: implicit declaration of function ‘kfree’; did you mean ‘vfree’? [-Werror=implicit-function-declaration]
kfree(buffer);
^~~~~
vfree
drivers/media/usb/cx231xx/cx231xx-417.c: In function ‘mpeg_open’:
drivers/media/usb/cx231xx/cx231xx-417.c:1713:7: error: implicit declaration of function ‘kzalloc’; did you mean ‘vzalloc’? [-Werror=implicit-function-declaration]
fh = kzalloc(sizeof(*fh), GFP_KERNEL);
^~~~~~~
vzalloc
drivers/media/usb/cx231xx/cx231xx-417.c:1713:5: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
fh = kzalloc(sizeof(*fh), GFP_KERNEL);
^
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
These two statements are not errors, reduce to appropriate level.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Trivial fix to spelling mistake in dev_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of putting V4L2_CAP_STREAMING and V4L2_CAP_READWRITE
everywhere, set device_caps earlier with these values.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are two places pointing to an unexisting "m.chehab@kernel.org"
email. I never had such email, so, I'm unsure how it ends there.
Anyway, it is plain wrong.
While here, use my canonical e-mail on a bunch of places that
are pointing to another e-mail. The idea is that, from now on,
all places will be pointing to the same SMTP server.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Right now, there are two mutexes serializing r/w ops: one "generic"
and another one specifically for stream on/off.
Clean it a little bit, getting rid of one of the mutexes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
pvrusb2-video-v4l.h only declares pvr2_saa7115_subdev_update and
includes pvrusb2-hdw-internal.h. pvrusb2-cx2584x-v4l.c does not
use pvr2_saa7115_subdev_update and it explicitly includes
pvrusb2-hdw-internal.h.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The use of a hard coded i2c address breaks the creation of the
second tuner in DualHD 01595 models. The issue is compounded
by lack of any error message stating that a driver failed
initialization. Use addr, which contains the correct address
for each tuner.
Fixes: ad32495b15 ("media: em28xx-dvb: simplify DVB module probing logic")
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Trivial fix to spelling mistake in proc text string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The recent "x86 ZONE_DMA love" discussion at LSF/MM pointed out that some
gspca sub-drivvers are using GFP_DMA to allocate buffers which are used
for USB bulk transfers, there is absolutely no need for this, drop it.
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Extra code to be able to use this stick, only digital, not analog
nor remote-control.
Signed-off-by: Marcel Stork <mjstork@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
A cosmetic change by combining two sets of boards into one set because
having the same arguments.
Signed-off-by: Marcel Stork <mjstork@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
VIDEO_CX231XX_RC requires RC_CORE, but VIDEO_CX231XX
does not require RC to compile or function.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The default is now 0, no need to override
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Trim out some unused config params. Use the i2c mux
adapter returned by frontend with the tuner.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mostly very straight forward replace of blocks with equivalent code.
Cleanup added at end of dvb_init in case of failure.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hauppauge 935C cannot communicate with the si2157
when using the mux adapter returned by the si2168,
so disable it to fix the device.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace zero fill memset inits with
equivalent {} in declaration
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace all usage of hard coded values with
the proper field from the board profile.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Now the board values match the hard coded
constants used in the dvb initialization.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Despite never getting called from atomic context,
usb URB memory allocations use GFP_ATOMIC, which does not sleep
for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
[mchehab+samsung@kernel.org: merged 3 similar patches into one]
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As the kernel doc "timers-howto.txt" reads,
short delay with msleep() can take much longer.
In a case of raspbery-pi platform where CONFIG_HZ_100 was set,
it actually affected the init of Friio devices
since it issues lots of i2c transactions with short delay.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Messages expected during device probe were being marked as errors.
Signed-off-by: Chris Mayo <aklhfex@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Newer DVB receivers of this type have a different USB PID.
Signed-off-by: Rainer Keller <mail@rainerkeller.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Convert the driver to allow its usage with the new I2C
binding way.
Please notice that this patch doesn't convert the
callers to bind to it using the new way.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner
functionality") removed the logic with sets the alternate for the DVB
device. Without setting the right alternate, the device won't be
able to submit URBs, and userspace fails with -EMSGSIZE:
ERROR DMX_SET_PES_FILTER failed (PID = 0x2000): 90 Message too long
Tested with Hauppauge HVR-950 model A1C0.
Fixes: be7fd3c3a8 ("media: em28xx: Hauppauge DualHD second tuner functionality")
Cc: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver doesn't use videobuf-dvb. So, stop adding an
unused struct and unused header on it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There's no need to use coherent buffers there. So, let the
DVB core do the allocation. That should give some performance
gain outside x86.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of repeating countless times a complex logic, use
the new dvb_module_probe()/dvb_module_release(), simplifying
the module.
That reduced about 15% at the module's size:
text data bss dec hex filename
7083 1108 12 8203 200b old/drivers/media/usb/dvb-usb-v2/dvbsky.o
5817 1108 12 6937 1b19 new/drivers/media/usb/dvb-usb-v2/dvbsky.o
Tested with a DVBSky S960C DVB-S2 tuner (0572:960c)
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Use the USBTV_TV_STD define instead of repeating ourselves.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Depending on the chosen standard, configure the decoder to use the
appropriate color encoding standard (PAL-like, NTSC-like or SECAM).
Until now, the decoder was not configured for a specific color standard,
making it autodetect the color encoding.
While this may sound fine, it potentially causes the wrong image tuning
parameters to be applied (e.g. tuning parameters for NTSC are applied to
a PAL source), and may confuse users about what the actual standard is
in use.
This commit explicitly configures the color standard the decoder will
use, making it visually obvious if a wrong standard was chosen.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The user-supplied norm value gets overwritten by the generic .norm
member from the norm_params. That way, we lose the specific norm the
user may want to set.
For instance, if the user specifies V4L2_STD_PAL_60, the value actually
used will be V4L2_STD_525_60, which in the end will be as if the user
had specified V4L2_STD_NTSC, since this is always the first bitfield we
match the norm value against before configuring the hardware.
The norm_params array is only there to match a norm with an output
resolution. The norm value itself should not be changed.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Make use of the V4L2_STD_525_60 and V4L2_STD_625_50 defines to
determine the vertical resolution to use when capturing.
V4L2_STD_525_60 (resp. V4L2_STD_625_50) is the set of standards using
525 (resp. 625) lines per frame, independently of the color encoding.
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add support for the SECAM norm, using the "AVSECAM" decoder configuration
sequence found in Windows driver's .INF file.
For reference, the "AVSECAM" sequence in the .INF file is:
0x04,0x73,0xDC,0x72,0xA2,0x90,0x35,0x01,0x30,0x04,0x08,0x2D,0x28,0x08,
0x02,0x69,0x16,0x35,0x21,0x16,0x36
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Re-format the register {address, value} pairs so they follow the same
order as the decoder configuration sequences in the Windows driver's .INF
file.
For instance, for PAL, the "AVPAL" sequence in the .INF file is:
0x04,0x68,0xD3,0x72,0xA2,0xB0,0x15,0x01,0x2C,0x10,0x20,0x2e,0x08,0x02,
0x02,0x59,0x16,0x35,0x17,0x16,0x36
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
From now on, I'll start using my @kernel.org as my development e-mail.
As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.
For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.
For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.
For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER.
Add the device to the id_table to make it work.
BugLink: https://bugs.launchpad.net/bugs/1620762
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Documentation/video4linux/gspca.txt is missing.
It has moved to Documentation/media/v4l-drivers/gspca-cardlist.rst
Signed-off-by: winton.liu <18502523564@163.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cx231xx USB bridge has issue streaming QAM256 DVB-C channels.
QAM64 channels were fine, but QAM256 channels produced corrupted
transport streams.
cx231xx alt mode 4 does not provide enough bandwidth to acommodate
QAM256 DVB-C channels, most likely DVB-T2 channels would break up
as well. Alt mode 5 increases bridge bandwidth to 90Mbps, and
fixes QAM256 DVB-C streaming.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that af9015 requires I2C_MUX, all drivers that select
it should also depend on it.
drivers/media/dvb-frontends/af9013.o: In function `af9013_remove':
>> drivers/media/dvb-frontends/af9013.c:1560: undefined reference to `i2c_mux_del_adapters'
drivers/media/dvb-frontends/af9013.o: In function `af9013_probe':
>> drivers/media/dvb-frontends/af9013.c:1488: undefined reference to `i2c_mux_alloc'
>> drivers/media/dvb-frontends/af9013.c:1495: undefined reference to `i2c_mux_add_adapter'
drivers/media/dvb-frontends/af9013.c:1544: undefined reference to `i2c_mux_del_adapters'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
While the logic there is correct, it tricks both humans and
machines, a the check if "i" var is not zero is actually to
validate if the "frames" var was initialized when the loop
ran for the first time.
That produces the following warning:
drivers/media/usb/uvc/uvc_v4l2.c:1192 uvc_ioctl_enum_framesizes() error: potentially dereferencing uninitialized 'frame'.
Change the logic to do the right test instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The current I2C error handling logic makes static analyzers
confused:
drivers/media/usb/em28xx/em28xx-input.c:96 em28xx_get_key_terratec() error: uninitialized symbol 'b'.
Change it to match the coding style we're using elsewhere.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Robert Schlabbach